Upload
robert-xie
View
228
Download
0
Embed Size (px)
Citation preview
7/26/2019 Scando 650 Variations.pdf
1/16
3825
E
F
2500
2000
*
Pay-load capacity (fuse 100 A) kg 1800 1700 1700 1600
Pay-load capacity (fuse 125 A) kg 2400 2300 2300 2200
Speed 50 Hz / 60 Hz m/min 0 65 0 65 0 65 0 65
Max. lifting height meter 200 200 200 200
Increased lifting height on request
No. of buffer springs pcs. 3 3 3 3
Safety device type GFD P/no. 9099255-1014
CAR DIMENSIONS
Internal width meter 1.5 1.5 1.5 1.5
Internal length meter 3.9 3.9 3.9 3.9
External length ( E ) meter add 0.12 m to internal length above
Internal height meter 2.3 2.3 2.3 2.3
Door opening W x H meter 1.5 or 3.2 4) x 2.0
ELECTRICAL DATA
Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 160 m required)
Power supply fuses A~ 100 or 125 alternatively
Triple motor machinery kW 3 x 11
Starting current (fuse 100 A) A~ 97
Starting current (fuse 125 A) A~ 110
Power consumpt.(fuse 100 A) kVA~ 58
Power consumpt.(fuse 125 A) kVA~ 66
Power cable guiding system Cable trolley
Data for other voltages on request
WEIGHTS
Base unit weight approx. kg 3450 2) 2) 2)
Mast section with one rack kg 115 115 115 115Mast section with two racks kg 135 135 135 135
Mast section length mm 1508 1508 1508 1508
TRANSPORT DIMENSIONS
Base unit incl. ground enclosure:
Length ( F ): m add 0.50 3)m to external length (E)
Width (G): m 2.55 2.6 4) 2.55 2.6 4)
Maximum height: m 3.10 3.10 3.10 3.10
machinery excl.
S C A N D O 6 5 0 F C / 3 9
3.9 m car with two 1) vertical doors X (C52)
3.9 m car with three vertical doors X (C53)
3.9 m car with one load ramp and one 1) vertical door X (C55)
3.9 m car with one load ramp and two vertical doors X (C56)
No 1220 E Dec. -07.
1) A 1.5 ms slim 3rd exit door also possible.
2)
Weights indicated for base model including standard entrance and exit door.Add additional 147 kg or 117 kg respectively, where optional load ramp occurs.
3) Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.
4) Is intended for the 3rd vertical lift door (location C). Add additional 235 mm to G, where double leaf swing door occurs.
G
Dua
lcars
4280
,
4380
or
4850
mm
1500
1492
ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.
Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.
* Maximum height
2300 mm possible
with all 1.5 m wide
doors
7/26/2019 Scando 650 Variations.pdf
2/16
S C A N D O 6 5 0 M o d u la r S y s te m
No 1220 E Dec. -07.
Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe
practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Printed in Sweden
3.5 m car base structure incl. safety railings (100 kg)
weight 1116 kg
Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg
Exit door combined with
optional electric / hydraulic
operated load ramp.
Weight 280 kg.
Add 147 kg when changed
from standard exit door.
Vertical full height
entrance door, weight 155 kg
Vertical exit door
in two parts,
weight 133 kg
Vertical slim
1.5 m exit door in two
parts, weight 75 kg
Vertical full height
slim 3.2 m entrance
door, weight 210 kg
Exit door combined with
optional manual load ramp.
Weight 250 kg.
Add 117 kg when changed
from standard exit door.
Closed, solid wall
on exit side,
weight 55 kg
7/26/2019 Scando 650 Variations.pdf
3/16
3825
E
F
2500
2000
*
Pay-load capacity (fuse 125 A) kg 2500 2500
Speed 50 Hz / 60 Hz m/min 0 54 0 54
Max. lifting height meter 200 200
Increased lifting height on request
No. of buffer springs pcs. 3 3
Safety device type GFD P/no. 9099255-1212
CAR DIMENSIONS
Internal width meter 2.0 2.0
Internal length meter 5.0 5.0
External length ( E ) meter add 0.12 m to internal length above
Internal height meter 2.3 2.3
Door opening W x H1)
meter A & B= 2.0x2.0 C=2.0x2.0 or 3.2x2.0
ELECTRICAL DATA
Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 180 m required)
Power supply fuses A~ 125
Triple motor machinery kW 3 x 11
Starting current (fuse 125 A) A~ 108
Power consumpt.(fuse 125 A) kVA~ 65
Power cable guiding system Cable trolley
Data for other voltages on request
WEIGHTS
Base unit weight approx. kg 4150 4550
Mast section with one rack kg 115 115Mast section with two racks kg 135 135
Mast section length mm 1508 1508
TRANSPORT DIMENSIONS
Base unit incl. ground enclosure:
Length ( F ): m add 0.50 3)m to external length (E)
Width (G): m 3.05 3.05
Maximum height: m 3.10 3.10
machinery excl.
S CANDO 6 5 0 F C 5 0
Extended 5.0 m car with two 1) vertical doors X
Extended 5.0 m car with three vertical doors X
Extended 5.0 m car with one load ramp and one 1) vertical door NA
Extended 5.0 m car with one load ramp and two vertical doors NA
Order No 809620 - 21 / 2(2) rev. A
1)A 1.5w x 2.0h or 3.2w x 2.0hslim 3rd exit door(c-gate) also possible.
2)
Weights indicated for base model including standard entrance and exit door.
3) Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.
G
5280
2000
1992
ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.
Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.
* Maximum height
2300 mm possible
with all 2.0 m wide
doors
7/26/2019 Scando 650 Variations.pdf
4/16
Order No 809620 - 21 / 2(2) rev. A
Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe
practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Printed in Sweden
S C A N D O 6 5 0 M o d u la r S y s te m
3.5 m car base structure incl. safety railings (112 kg)
weight 1640 kg
Additional section
to increase car length
0.55 m in one or two
sides (0.55 + 0.55 m).
Weight 150 kg each.
Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg
Vertical full height exit &
entrance door, weight 195 kg
Vertical full height
slim 3.2 m entrance
door, weight 250 kg
Closed, solid wall
on exit side,
Vertical full height exit &
entrance door, weight 195 kg
7/26/2019 Scando 650 Variations.pdf
5/16
4325
E
F
2500
2500
*
Pay-load capacity (fuse 125 A) kg 2500 2500
Speed 50 Hz / 60 Hz m/min 0 54 0 54
Max. lifting height meter 200 200
Increased lifting height on request
No. of buffer springs pcs. 3 3
Safety device type GFD P/no. 9099255-1212
CAR DIMENSIONS
Internal width meter 2.0 2.0
Internal length meter 5.0 5.0
External length ( E ) meter add 0.12 m to internal length above
Internal height meter 2.8 2.8
Door opening W x H meter all equal =2.0x 2.5
ELECTRICAL DATA
Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 180 m required)
Power supply fuses A~ 125
Triple motor machinery kW 3 x 11
Starting current (fuse 125 A) A~ 108
Power consumpt.(fuse 125 A) kVA~ 65
Power cable guiding system Cable trolley
Data for other voltages on request
WEIGHTS
Base unit weight approx. kg 4500 5000
Mast section with one rack kg 115 115Mast section with two racks kg 135 135
Mast section length mm 1508 1508
TRANSPORTDIMENSIONS
Base unit incl. ground enclosure:
Length ( F ): m add 0.50 1)m to external length (E)
Width (G): m 3.05 3.05
Maximum height: m 3.60 3.60
machinery excl.
S CANDO 6 5 0 FC 5 0
Extended 5.0 m car with two 1) vertical doors X
Extended 5.0 m car with three vertical doors X
Extended 5.0 m car with one load ramp and one vertical door NA
Extended 5.0 m car with one load ramp and two vertical doors NA
1)Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.
G
5280
2000
1992
ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.
Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.
* Maximum height
2800 mm possible
with all 2.0 m wide
doors
Preliminary 2.0 x 5.0 x 2.8 2(2)
7/26/2019 Scando 650 Variations.pdf
6/16
Preliminary 2.0 x 5.0 x 2.8 2(2)
Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe
practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Printed in Sweden
S C A N D O 6 5 0 M o d u la r S y s te m
3.5 m car base structure incl. safety railings (112 kg)
weight 1640 kg
Additional section
to increase car length
0.55 m in one or two
sides (0.55 + 0.55 m).
Weight 150 kg each.
Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg
Vertical full height exit &
entrance door, weight 195 kg
Vertical full height
slim 3.2 m entrance
door, weight 250 kg
Closed, solid wall
on exit side,
Vertical full height exit &
entrance door, weight 195 kg
7/26/2019 Scando 650 Variations.pdf
7/16
3825
E
F
2500
2000
*
Pay-load capacity (fuse 125 A) kg 2600 2600
Speed 50 Hz / 60 Hz m/min 0 54 0 54
Max. lifting height meter 200 200
Increased lifting height on request
No. of buffer springs pcs. 3 3
Safety device type GFD P/no. 90099255-1212
CAR DIMENSIONS
Internal width meter 2.0 2.0
Internal length meter 3.9 3.9
External length ( E ) meter add 0.12 m to internal length above
Internal height meter 2.3 2.3
Door opening W x H meter 2.0x 2.0(A & B), 3.2 x 2.0 (C)
ELECTRICAL DATA
Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 170 m required)
Power supply fuses A~ 125
Triple motor machinery kW 3 x 11
Starting current (fuse 125 A) A~ 95
Power consumpt.(fuse 125 A) kVA~ 57
Power cable guiding system Cable trolley
Data for other voltages on request
WEIGHTS
Base unit weight approx. kg 3850 4250
Mast section with one rack kg 115 115Mast section with two racks kg 135 135
Mast section length mm 1508 1508
TRANSPORT DIMENSIONS
Base unit incl. ground enclosure:
Length ( F ): m add 0.50 3)m to external length (E)
Width (G): m 3.05 3.05
Maximum height: m 3.10 3.10
machinery excl.
S C A N D O 6 5 0 F C / 3 9
3.9 m car with two 1) vertical doors X
3.9 m car with three vertical doors X
3.9 m car with one load ramp and one 1) vertical door NA
3.9 m car with one load ramp and two vertical doors NA
Order No 809620 - 21 / 1(2) rev. A
1) A 1.5 m slim 3rd exit door (c-side) also possibleinstead of 3.2m.
2) Weights indicated for base model including standard entrance and exit door.
3) Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.
G
5280
2000
1992
ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.
Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.
* Maximum height
2300 mm possible
with all 2.0 m wide
doors
C
A
B
7/26/2019 Scando 650 Variations.pdf
8/16
Order No 809620- 21/ 1(2)rev. A
S C A N D O 6 5 0 M o d u la r S y s te m
Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg
3.5 m car base structure incl. safety railings (112 kg)
weight 1640 kg
Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe
practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Printed in Sweden
Vertical full height exit &
entrance door, weight 195 kg
Vertical full height
slim 3.2 m entrance
door, weight 250 kg
Closed, solid wall
on exit side,
Vertical full height exit &
entrance door, weight 195 kg
7/26/2019 Scando 650 Variations.pdf
9/16
7/26/2019 Scando 650 Variations.pdf
10/16
7/26/2019 Scando 650 Variations.pdf
11/16
3825
E
F
2500
2000
*
Pay-load capacity (fuse 100 A) kg 2800 2700 2600 2600
Pay-load capacity (fuse 125 A) kg 3200 3200 3200 3200
Speed 50 Hz / 60 Hz m/min 0 54 0 54 0 54 0 54
Max. lifting height meter 200 200 200 200
Increased lifting height on request
No. of buffer springs pcs. 3 3 3 3
Safety device type GFD P/no. 90099255-1212
CAR DIMENSIONS
Internal width meter 1.5 1.5 1.5 1.5
Internal length meter 3.9 3.9 3.9 3.9
External length ( E ) meter add 0.12 m to internal length above
Internal height meter 2.3 2.3 2.3 2.3
Door opening W x H meter 1.5 or 3.2 4) x 2.0
ELECTRICAL DATA
Power supply range 400 500 V, 50 or 60 Hz, 3 PhaseAt 400 V/50 Hz: (step-up transformer above 170 m required)
Power supply fuses A~ 100 or 125 alternatively
Triple motor machinery kW 3 x 11
Starting current (fuse 100 A) A~ 98
Starting current (fuse 125 A) A~ 108
Power consumpt.(fuse 100 A) kVA~ 59
Power consumpt.(fuse 125 A) kVA~ 65
Power cable guiding system Cable trolley
Data for other voltages on request
WEIGHTS
Base unit weight approx. kg 3450 2) 2) 2)
Mast section with one rack kg 115 115 115 115Mast section with two racks kg 135 135 135 135
Mast section length mm 1508 1508 1508 1508
TRANSPORT DIMENSIONS
Base unit incl. ground enclosure:
Length ( F ): m add 0.50 3)m to external length (E)
Width (G): m 2.55 2.6 4) 2.55 2.6 4)
Maximum height: m 3.10 3.10 3.10 3.10
machinery excl.
S C A N D O 6 5 0 F C / 3 9
3.9 m car with two 1) vertical doors X (C52)
3.9 m car with three vertical doors X (C53)
3.9 m car with one load ramp and one 1) vertical door X (C55)
3.9 m car with one load ramp and two vertical doors X (C56)
No 1218 E Dec. -07.
1)A 1.5 ms slim 3rd exit door also possible.
2)
Weights indicated for base model including standard entrance and exit door.Add additional 147 kg or 117 kg respectively, where optional load ramp occurs.
3) Add additional 0.1 m where accessories for pipe support equipment are added to the ground enclosure.
4) Is intended for the 3rd vertical lift door (location C). Add additional 235 mm to G, where double leaf swing door occurs.
G
Dual
cars
4280
,
4380
or
4850
mm
1500
1492
ALIMAK AB, P O Box 720, SE-931 27 Skellefte, Sweden. Tel. +46 910 87000.
Fax +46 910 56690. E-mail: [email protected]. Web site: www.alimak.com.
* Maximum height
2300 mm possible
with all 1.5 m wide
doors
7/26/2019 Scando 650 Variations.pdf
12/16
No 1218 E Dec. -07.
S C A N D O 6 5 0 M o d u la r S y s te m
Pictures are illustrative only and do not necessarily show the configuration of products on the market at the given point in time. Products must be used in conformity with safe
practice and applicable statues, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Printed in Sweden
3.5 m car base structure incl. safety railings (100 kg)
weight 1116 kg
Triple motor machineryincl. VFC-panel (75 kW). Weight 890 kg
Exit door combined with
optional electric / hydraulic
operated load ramp.
Weight 280 kg.
Add 147 kg when changed
from standard exit door.
Vertical full height
entrance door, weight 155 kg
Vertical exit door
in two parts,
weight 133 kg
Vertical slim
1.5 m exit door in two
parts, weight 75 kg
Vertical full height
slim 3.2 m entrance
door, weight 210 kg
Exit door combined with
optional manual load ramp.
Weight 250 kg.
Add 117 kg when changed
from standard exit door.
Closed, solid wall
on exit side,
weight 55 kg
7/26/2019 Scando 650 Variations.pdf
13/16
7/26/2019 Scando 650 Variations.pdf
14/16
7/26/2019 Scando 650 Variations.pdf
15/16
7/26/2019 Scando 650 Variations.pdf
16/16