SBM-120-UV Surface Mount Series Ultraviolet LED · Relative Radiometric Flux vs Forward Current Relative Radiometric Flux vs T j Delta Peak Wavelength vs Forward Current Delta Peak

Applications:

• Curing:

› Inks

› Coatings

› Adhesives

• Inspection

• Machine Vision

• Fiber-coupled illumination

• Scientific Instrumentation

• Entertainment Lighting / Black Lights

Features:• Extremely high optical output from a compact UV LED emitter - over 20W/cm2 output

• High thermal conductivity package - 0.28°C/W junction to case

• Surface Mount Array UV LED chipset with surface emitting area of 12 mm2

• Vertical chip UV LED technology for high power density and uniform emission

• Wide Range of UVA Wavelengths (365, 385, 395 and 405 nm)

• Unencapsulated die with low profile protective window facilitates optical coupling and maximizes irradiance versus working distance

• Electrically isolated thermal path

• Resilient series-parallel chip configuration for lower current operation up to 4.5A

• Environmentally friendly: RoHS and REACH compliant

Table of ContentsGeneral Considerations . . . .2

Binning Structure . . . . . . . . . .3

Part Numbering . . . . . . . . . . . .4

Ordering Information . . . . . .4

Optical and Electrical Characteristics . . . . . . . . . . . . .5

Angular Distribution . . . . . . .8

Typical Spectrum . . . . . . . . . .8

Mechanical Dimensions . . . .9

Thermal Resistance . . . . . . 10

Mechanical Dimensions SBM-120 Starboard . . . . . . 11

Solder Profile . . . . . . . . . . . . 12

Shipping Information . . . . 13

History of Changes . . . . . . . 16

1PDS-002839 Rev02 © 2017 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com1145 Sonora Ct. • Sunnyvale, CA 94086

SBM-120-UV Product Datasheet

SBM-120-UV

Surface Mount Series

Ultraviolet LED




General Considerations

Environmental Considerations:

As a leading provider of solid-state lighting solutions, Luminus implements strict substance control policies to ensure all of its products are environmentally friendly. As all Luminus LEDs, the SBM-120-UV series are compliant with the Restriction of Hazardous Substances Directive (RoHS) and REACH directives from the European Community.

Product Testing:

Every SBM-120-UV LED is fully production tested to ensure it meets the high quality standards customers have come to expect from Luminus products. Devices are binned at 2.25A , 20 ms pulse condition at Tj = 25°C . Current and temperature curves are provided in this document allowing users to predict the LED performance and characteristics under their own driving and thermal conditions.

Reliability:

Luminus SBM-120-UV LED series are required to pass a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity. These tests ensure that the devices deliver high performance and achieve reliable long term operation in the demanding environments. Please contact Luminus for further information.



SBM-120-UV Binning Structure

SBM-120-UV LEDs are specified for radiometric flux and peak wavelength at a drive current of 2.25 A and placed into one of the following Power Bins and Wavelength Bins:

Color Flux Bin (F) Minimum Flux (W) Maximum Flux (W)

UV

H 8.0 9.1

I 9.1 10.0

J 10.0 11.0

K 11.0 12.1

L 12.1 13.3

M 13.3 14.6

N 14.6 16.1

P 16.1 17.7

Q 17.7 19.5

Note 1: Luminus maintains a +/- 6% tolerance on power measurements.

Color Wavelength Bin (WWW)

Minimum Wavelength (nm)

Maximum Wavelength (nm)

UV

365 365 370

370 370 375

380 380 385

385 385 390

390 390 395

395 395 400

400 400 405

405 405 410

Radiometric Flux Bins1

Wavelength Bins




Ordering Information

Note 1: A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable.

Note 2: Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion.

Note 3: For ordering package configuration R34, replace F34 with R34 in the Ordering Part Number.

Product Family Emitting Area Color Package Configuration Bin Kit 1,2

SBM = Ceramic Surface Mount

Multi-Die Package120 = 12 mm2 UV = Ultraviolet

F34 = 10mm x 11mm Ceramic Surface Mount

Package, 3x4 Array

R34 = Starboard configuration

See page 3 for complete bindefinition tables


Wavelength Range (nm)Radiometric Flux

Wavelength Bins

Package Configuration

Ordering Part Number3Bin Kit Flux Code

Min. Flux (W)

365-375H 8.0 365, 370 F34 SBM-120-UV-F34-H365-22

I 9.1 365, 370 F34 SBM-120-UV-F34-I365-22

380-390L 12.1 380, 385 F34 SBM-120-UV-F34-L385-22

M 13.3 380, 385 F34 SBM-120-UV-F34-M385-22

390-400L 12.1 390, 395 F34 SBM-120-UV-F34-L395-22

M 13.3 390, 395 F34 SBM-120-UV-M34-M395-22

400-410K 11.0 400, 405 F34 SBM-120-UV-F34-K405-22

L 12.1 400, 405 F34 SBM-120-UV-F34-L405-22

Part Numbering Nomenclature SBM <XX> W<tc> X34 <F###-##>

Ordering Part Numbers



Optical & Electrical Characteristics

UV

Parameter Symbol Values 1,2 Unit

Peak Wavelength Range λ 365 - 375 380-390 390-400 400-410 nm

Test Current I 2.25 2.25 2.25 2.25 A

Current Per Die ID 0.75 0.75 0.75 0.75 A

Peak Wavelength Typ. λp 368 387 394 401 nm

Radiometric Flux 3 Φtyp 10.6 15.3 15.6 12.9 W

Forward Voltage

VF min 12.5 12.5 12.5 12.5 V

VF 13.4 14.8 13.2 13.1 V

VF max 16.0 16.0 16.0 16.0 V

FWHM at 50% of Φ Δλ1/2 13 13 17 17 nm

Parameter Symbol Values Unit

Peak Wavelength Range λ 365 - 375 380-390 390-400 400-410 nm

Absolute Minimum Current (CW or Pulsed) 4 If-min 0.3 0.3 0.3 0.3 A

Absolute Maximum Current (CW) 4 If-max-cw 4.5 6 6 6 A

Absolute Maximum Repetative Surge Current 4

(Duty cycle >25%, t=1ms)If-max-rs 6 7.5 7.5 7.5 A

Maximum Junction Temperature 5 Tj-max 125 125 125 125 °C

Storage Temperature Range Ts -40 to 100 °C

Total Emitting Area Ae 20.7 mm2

ESD Rating- Human Body Model VHBM 8 kV

Note 1: Data verified using NIST traceable calibration standard.

Note 2: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 2.25 A (0.75 A/mm2) using a 20 ms pulse at 25°C.

Note 3: Typical total flux from emitting area at listed peak wavelength. Performance trends for a selected power level are shown in the graphs on page 6. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus.

Note 4 SBM-120-UV devices can be driven at currents ranging from 300 mA to 6 A (0.3 to 4.5A for 365-375 nm devices) and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements..

Note 5: Lifetime is dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure desired lifetime. Please contact Luminus for reliability information.


Product Characteristics1,2

Absolute Minimum and Maximum Ratings3



Optical & Electrical CharacteristicsRelative Radiometric Flux vs Forward Current Relative Radiometric Flux vs Tj

Delta Peak Wavelength vs Forward Current Delta Peak Wavelength vs Tj


φe/φe(2.25A) Single Pulse 20ms Tj = 25°C φe/φe (25°C) Single Pulse 20ms If = 2.25A

λp/λp(2.25A) Single Pulse 20ms Tj = 25°C λp/λp(Tj) Single Pulse 20ms If = 2.25A



Optical & Electrical CharacteristicsForward Voltage vs Forward Current Delta Forward Voltage vs Tj


ΔVf = V(If) - V(2.25A) Single Pulse 20ms Tj = 25°C ΔVf = V(Tj) - V(25°C) Single Pulse 20ms If = 2.25A

-1.50

-1.00

-0.50

0.00

0.50

1.00

-5 5 15 25 35 45 55 65 75 85 95 105

Δ Fo

rwar

d Vo

ltage

(Vf)

Tj (°C)

365 nm

385, 395 nm

405 nm


Typical Angular Distribution Pattern


Typical Spectra


0.2

0.4

0.6

0.8

1.0

0 20 40 60 800.20.40.60.81.0

01020

30

40

50

60

70

80

90

0.0

0.2

0.4

0.6

0.8

1.0

300 325 350 375 400 425 450 475 500

Rela

tive

Inte

nsity

Wavelength (nm)

365 nm

385 nm

395 nm

405 nm


Mechanical Dimensions – SBM-120-UV-F34 Surface Mount Configuration1,2



Note 1: Dimensions Are In Millimeters [Inches].Note 2: For more details see Luminus drawing DWG-002867.


SBM-120-UV-F34 Surface Mount Configuration- Solder Pad Layout1,2


Typical Thermal Resistance

Rj-s_el3 0.28 ºC/W

Rj-b_el4 0.40 ºC/W

Rj-hs_el5 0.52 ºC/W

Note 3: Thermal resistance values are measured according to JEDEC JESD14 using a 3A source current. (1A/mm2).

Note 4: Thermal resistance is measured using a SAC305 solder, a copper starboard, and eGraf 1205 thermal interface material.

Note 5: All values are electrical thermal resistance based on input power.

Ceramic Package

Copper Starboard

Heatsink

Rj-s_el

Rj-b_el

Rj-hs_el

Thermal Resistance3,4,5


Note 1: Dimensions Are In Millimeters [Inches]Note 2: Recommended solder stencil thickness: .15 [.006].

ANODE PAD

THERMAL PAD

CATHODE PAD


Mechanical Dimensions – SBM-120-UV-R34 Star Board Configuration1,2,3,4,5,6

Note 1: Tolerances per IPC-610, Class 2.

Note 2: Recommended mounting screw: M3 or #4.

Note 3: All dimensions in millimeters [mils].

Note 4: All anode pads on board are interconnected. All cathode pads on board are interconnected.

Note 5: Center of ceramic module to center of starboard is +/- 0.15[0.006].

Note 6: For more details, reference Luminus drawing DWG-002932.



0 0

Tem

pera

ture

(ºC

)

Time (sec) 30 60 90 120 150 180 210 240 270 300

25

50

75

100

125

150

175

200

225

250

Note 1: Temperatures are taken and monitored at the component copper layer.

Note 2: Optimum profile may differ due to oven type, circuit board or assembly layout.

Note 3: Recommended lead free, no-clean solder: AIM NC254-SAC305.

Note 4: Refer to APN-001473 soldering and handling application note for additional solder profiles and details.

Note 5: MSL- 1 Level.

Solder Profile


Lead free solder guideline for low density boards

Solder Profile Stage Lead-Free Solder

Profile length, Ambient to Peak 2.75 - 3.5 minutes

Time above 217º C 30 - 60 seconds

Cooldown Rate ≤4º C/sec

Cooldown duration 45 ± 15 sec

SAC 305 Reflow Profile Window For Low Density Boards






Shipping Tray Outline-SBM-120-UV-F34 Surface Mount Configuration- Emitter

Note 1: Dimensions are in inches [millimeters].

Note 2: Each tray is covered with a top tray.

Note 2: For detailed drawing of shipping trays, please refer to Luminus document TO-1171 which is available upon request..




Shipping Tray Outline-SBM-120-UV-R34 Star Board Configuration1

Note 1: For detailed drawing of shipping trays, please refer to Luminus document TO-0675 which is available upon request..




Packing and Shipping Specification

Product Configuration Packing Configuration Qty /Pack Dimensions (L x W x H, mm)

F34 - Surface Mount Stack of 2 trays with 25 devices per trayEach pack is enclosed in ESD bag 50 174 x 110 x 22

R34 - Starboard Single tray 10 devicesEach pack is enclosed in ESD bag 10 175 x 74 x 12

Packing Specification

Label Fields (subject to change):• 6-8 digit Box number (for Luminus internal use)

• Luminus ordering part number

• Quantity of devices in pack

• Part number revision (for Luminus internal use)

• Customer’s part number (optional)

• Bin (FF-WW) as defined page 3

• 2D Bar code

Product Label Specification

Sample label –for illustration only

SBT-120-UV-F34-L395-22

UB-D

Shipping Carton

Shipping Carton Quantity Material Dimensions (L x W x H, mm)

Carton Box 1 -20 packs(50 - 1000 Devices) S4651 560 x 560 x 200

L395


The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information.

This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries.

Rev Date Description of Change

PDS-002839 Rev01 01/24/2017 Preliminary and pending final characterization updates

PDS-002839 Rev02 08/17/2017 Update characterization, bin kit offerings, and drawings. Add packaging informa-tion.

History of Changes



Documents

SBM-120-UV Surface Mount Series Ultraviolet LED · Relative Radiometric Flux vs Forward Current Relative Radiometric Flux vs T j Delta Peak Wavelength vs Forward Current Delta Peak