Sale - Jamestown Distributors · Type Size Regular SALE Cold or Warm 2 pt $39.99 $34.99 Cold or Warm 2 qt $65.99 $58.99 Cold or ... 8 oz WSY-650-8 $20.79 32 oz WSY-650-32 $60.04 BoatLife

CPESTM Penetrating Epoxy Sealer·Penetrates and saturates wood with a premium epoxy resin. A tough, flexible resin system in a solvent blend that can be used to aid in the restoration of rotted wood. CPES is effective because it contains a special blend of solvents that penetrate deep into wood cellulose and fibers -- allowing the epoxy to chemically adhere and strengthen the wood. Mixes 1:1 Use Cold Formula from 28-65 degrees F and Warm Formula from 50-86 degrees F.

Sale

Type Size Regular SALECold or Warm 2 pt $39.99 $34.99Cold or Warm 2 qt $65.99 $58.99Cold or Warm 2 gal $229.99 $194.99

Six10 Thickened Epoxy Adhesive·Six10 is a thickened epoxy adhesive that combines thestrength and reliability of a two-part epoxy with the convenience of a single part formula. Easy to apply with a standard caulking gun. Colorless resin and hardener. Cartridge contains 190ml of resin & hardener. Includes one mixing nozzle. Additional nozzles sold separately.

G/5 - 5 Minute Epoxy·G/5 Five Minute epoxy adhesive is an easy to use, 2 part resin and hardener system. G/5 is great for general bonding and quick repairs. One to one mix ratio, no pumps or metering required. Cures in 3 to 5 minutes.

Size Item # Price4 oz WSY-865-4 $20.5616 oz WSY-865-16 $55.80

G/Flex Liquid Epoxy·G/flex epoxy is resilient enough to bond dissimilar materials & flexible enough to absorb the stress of expansion, contraction, shock and vibration. Includes resin & hardener.

Size Item # Price8 oz WSY-650-8 $20.7932 oz WSY-650-32 $60.04

BoatLife GIT-Rot·BoatLife Git Rot penetrates rotted wood and restores it to its original strength. Pour or inject this unique 2 part liquid epoxy into rotten wood fibers. It saturates fibers via capillary action and cures overnight. Git Rot cures into a resilient adhesive that arrests dry rot by bonding wood membranes together. The result is stronger than when the wood was new. Once cured, it can be sanded, painted, drilled, and fastened. Boatlife formulated it for compatibility with fiberglass resins, epoxy, and most sealants.

Size Item # Price4 oz BTL-1063 $14.9916 oz BTL-1064 $32.9932 oz BTL-1065 $53.99

31 | Jamestowndistributors.com | 800.423.0030 | For boaters and their craft

Excellent for preparing bare

wood for varnish or paint!

Customer photo: Christian Carleton

WSY-610-6

6-pack $13399WSY-610

Only $2230


THIXO is the easy way to apply Epoxy!Thixo gives you the strength of a modern Epoxy adhesive in an easy to use cartridge. This convenient point and shoot system can be used with any standard caulking gun to dispense a bead of thickened structural epoxy that adheres to wood, metals, fiberglass and concrete.

Each cartridge of Thixo comes equipped with TWO static mixing tips that ensure the correct ratio of resin and hardener is automatically mixed upon application. Easily lay a bead of the unique non-sagging adhesive to vertical or overhead surfaces. Thixo cures to a hard translucent surface that can be sanded, drilled or painted. Additional tips available.

Ep

ox

y

See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 32

Working Time: 30-35 min.Tensile Strength: 6,000 psiFlexural Strength: 10,500 psi

JD-THIXO 185ml.

Only $1599JD-THIXO6

6-pack $8999


This clear Epoxy Resin is designed to bond with fiberglass, reinforcing fabrics, wood and metals. Combine this versatile resin with a variety of fillers to create excellent adhesive, filleting and fairing compounds.

By using our 5:1 calibrated pumps you can easily combine with either a Fast or a Slow Hardener. It will cure to a high strength, clear plastic solid with excellent moisture resistance. Once cured it can be sanded and shaped.

Designed to easily wet-out and bond with fiberglass or other fabrics. It has excellent thin-film characteristics to easily flow out and self-level making any laminating job easy. Our TotalBoat 5:1 Epoxy

is suitable for a wide range of boatbuilding

& repair projects!

Traditional 5:1 Epoxy

ResinGallons $7999

Compatible with other leading 5:1 Epoxies

List: $99.99

Get the Kit! Our TotalBoat Epoxy kits contain everything you need to tackle epoxy repairs & fiberglassing projects. Each kit includes 5:1 Epoxy resin, either Fast or Slow hardener, a pump set, 2 mixing sticks, 2 mixing pails & latex gloves. Qt. Kit Only $44.99 Gal. Kit Only $99.99

5:1 Epoxy Chart

Mike mixing in microballoons to make an epoxy fairing compound.

33 | Jamestowndistributors.com | 800.423.0030 | For boaters and their craft See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 34

Pot Set Cure Mix Tensile Hardeners Item# Size MSRP Your Price Life @75º Time @75º Time @75º Ratio Strength FAST A JD-521FA 1 pt $20.00 $16.99 12 minutes 60 minutes 6 hours 5:1 8000 psiFAST B JD-521FB 1 qt $45.00 $39.99 12 minutes 60 minutes 6 hours 5:1 8000 psiFAST C JD-521FC .98 gal $160.00 $139.99 12 minutes 60 minutes 6 hours 5:1 8000 psi

SLOW A JD-521SA 1 pt $20.00 $16.99 20-25 minutes 90 minutes 10 hours 5:1 7500 psiSLOW B JD-521SB 1 qt $45.00 $39.99 20-25 minutes 90 minutes 10 hours 5:1 7500 psiSLOW C JD-521SC .98 gal $160.00 $139.99 20-25 minutes 90 minutes 10 hours 5:1 7500 psi

Hardener Choices Pump MixResins Item# Size MSRP Your Price Slow Fast Size Needed Viscosity Ratio

Epoxy Resin JD-521RA 1 qt $40.00 $29.99 JD-521SA JD-521FA 1 pt. JD-521PUMPSET 1000 cps 5:1

JD-521RB 1 gal $99.99 $79.99 JD-521SB JD-521FB 1 qt. JD-521PUMPSET 1000 cps 5:1JD-521RC 4.46 gal $400.00 $319.99 JD-521SC JD-521FC .98 gal JD-521PUMPSET 1000 cps 5:1

Fillers Item # Size Description Strength Sandability MSRP

Silica JD-25-001 1 qt High Worst $10.91Thickener JD-25-002 1/2 gal $15.28Plastic Mini JD-25-005 1 qt $25.48Fibers JD-25-006 1/2 gal $36.40Wood Flour JD-25-020 1 qt $13.51

JD-25-021 1/2 gal $19.75

Phenolic JD-25-007 1 qt $23.66Microballoons JD-25-008 1/2 gal Low Best $30.58

Also referred to as coloidal silica. Can be used alone for a very smooth, high strength mixture.

Used to thicken the mixture to make a glue. Excellent for making a gap filling adhesive.

Fine sawdust. Excellent for creating glues and structural fillets.

These bulking agents are hollow, purple-brown microscopic phenolic spheres. Low Density filler. Not recommended for gluing.

Ep

ox

y

5:1 Epoxy Chart

* JD-521PUMPSET - the pumpset gives you a pump for both resin and hardner. $11.99

Epoxy Kits Item# Resin Size Hardener Size Your Price Resin Hardener Pump Included Mix Ratio FAST A JD-521KITFA 1 qt 1 pt $44.99 JD-521RA JD-521FA JD-521PUMPSET 5:1FAST B JD-521KITFB 1 gal 1 qt $99.99 JD-521RB JD-521FB JD-521PUMPSET 5:1SLOW A JD-521KITSA 1 qt 1 pt $44.99 JD-521RA JD-521SA JD-521PUMPSET 5:1SLOW B JD-521KITSB 1 gal 1 qt $99.99 JD-521RB JD-521SB JD-521PUMPSET 5:1

Set $1452

207 Special Clear Hardener·207 Special Clear Hardener was especially developed for coating applications where an exceptionally clear moisture-resistant natural wood finish is desired. UV inhibiting additive improves resistance, but still requires further UV protection. 207 is designed to self level for smooth finishes and to wet-out and bond fabrics. Although it provides good physical properties for general bonding applications, it is more difficult to thicken and less cost effective for this purpose than 205 or 206 hardeners. WSY-207A

205 Fast Hardeners·205 Fast Hardener is a low-viscosity epoxy curing agent for use when shorter working and cure time is needed or to provide adequate working time at cooler temperatures. Not intended for clear coating.WSY-205A

Pints $2010

206 Slow Hardeners·206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. Not intended for clear coating applications.WSY-206A

0.44 pt $2010

300 Mini Pump Set ·300 Mini Pumps provide accurate metering of all Size A, B and C West System epoxy resin and hardeners. Calibrated to deliver the proper working ratio, this set includes one resin pump and two hardener pumps. WSY-300

0.66 pt $3893

Epoxy Spreaders Single Edge·These single edge spreaders are useful for applying epoxies and other gel coats at a constant rate.GER-030001 4”x2-1/2”

5 per pack $376

Epoxy Syringes·Reusable syringes that can be loaded with epoxy mixture for injecting into tight spots. The 14cc syringe from West System has a slight curve in the tip to improve application. The longer 60cc syringe has a straight tip. Min 5/pack.

2 pack $628

Brushes - Acid, Epoxy, Glue·These natural bristle acid or glue brushes have crimped metal handles. The perfect size for small glue jobs. Brush head is 3/8”.Pack/12 $5.58Box/144 $23.64

Pack $558

Your source for WEST SYSTEM Epoxy

Size Item # 5-pack14cc WSY-807 $3.5960cc KEN-160157 $4.03

WEST 8002 Roller Covers·These roller covers are a high density polyurethane foam ideal for epoxy applications. Can be cut into shorter lengths to match the application area. Covers are 7” wide. 2/pack. Yellow.


209 Extra Slow (Tropical) Hardener·209 Extra Slow (Tropical) hardener is formulated for general coating and bonding applications in extremely warm and or humid conditions, or when extended working time is desired at room tempera-ture. Not intended for Clear Coating.WSY-209A

0.66 pt $3423

105 Epoxy Resin ·The industry standard for boatbuilding and repair projects. 105 Epoxy resin is the base material on which all of the line’s compounds are built. The resin is a clear, pale amber, low viscosity liquid epoxy for use with WEST hardeners.

100% Price Match Guarantee

Hardener Choices Pump MixResins Item# Size MSRP Slow Fast Coating Tropical Needed Viscosity Ratio

105 Epoxy Resin WSY-105A 1 qt $39.71 WSY-206A WSY-205A WSY-207A WSY-209A WSY-300 1000 cps 5:1

WSY-105B 0.98 gal $99.24 WSY-206B WSY-205B WSY-207B WSY-209B WSY-300 1000 cps 5:1

WSY-105C 4.35 gal $390.80 WSY-206C WSY-205C WSY-207C WSY-209C WSY-300 1000 cps 5:1

We are WEST System Epoxy experts - call us with your questions.

Ep

ox

y


Pot Set Cure Mix Tensile PumpHardeners Item# Size MSRP Life @72º Time @72º Time @72º Ratio Strength Needed205 Fast Hardener WSY-205A 0.44 pt $20.50 9-12 minutes 6-8 hours 1-4 Days 5:1 7846 psi WSY-300

WSY-205B 0.86 qt $45.18 9-12 minutes 6-8 hours 1-4 Days 5:1 7846 psi WSY-300

WSY-205C 0.94 gal $153.17 9-12 minutes 6-8 hours 1-4 Days 5:1 7846 psi WSY-300

206 Slow Hardener WSY-206A 0.44 pt* $20.50 20-25 minutes 10-15 hours 1-4 Days 5:1 7320 psi WSY-300

WSY-206B 0.86 qt* $45.18 20-25 minutes 10-15 hours 1-4 Days 5:1 7320 psi WSY-300

WSY-206C 0.94 gal* $153.17 20-25 minutes 10-15 hours 1-4 Days 5:1 7320 psi WSY-300

207 Special Coating Hardener "Clear coat"

WSY-207A 0.66 pt* $38.93 22-27 minutes 12-18 hours 4-7 Days 3:1 7509 psi WSY-300

WSY-207B 0.33 gal* $83.16 22-27 minutes 12-18 hours 4-7 Days 3:1 7509 psi WSY-300


209 Extra SlowHardener “Tropical”

WSY-209A 0.66 pt* $34.23 40-50 minutes 20-24 hours 4-9 Days 3:1 7105 psi WSY-300

WSY-209B 0.33 gal* $76.67 40-50 minutes 20-24 hours 4-9 Days 3:1 7105 psi WSY-300


Fillers Used For Item# Size MSRP Strength Sandability 403 Microfibers Bonding Wood WSY-403-9 6 oz $10.98 High Hard

WSY-403-28 20 oz $25.63

404 High Density Filler Filleting & Gap filling WSY-404-15 15.2 oz $14.59WSY-404-45 45.6 oz $33.63

406 Colloidal Silica General Bonding & Filleting WSY-406-2 1.7 oz $11.18WSY-406-7 5.5 oz $26.38WSY-406B 8 oz $250.19

405 Filleting Blend Fillets & Wood Joints WSY-405 8 oz $16.23

407 Low Density Filler Fairing putties WSY-407-5 4 oz $17.01WSY-407-15 12 oz $39.50

410 Microlight Light Fairing compounds WSY-410-2 2 oz $16.15WSY-410-7 5 oz $32.04 Low Easy

WSY-410-B 4 lb $292.33

JD Tech Team:

Brian - Specializing in Teleflex, inboard/outboard engines, & marine engine parts

{ 9 years in industry }

Speak to our advisors at 800-423-0030

3.5 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 40lbs/18kgMRC-1F03201HK

4 HP FourStroke·Full throttle RPM: 4500-5500·Dry weight: 57lbs/26kgMRC-1F04201HK


6 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 57lbs/26kgMRC-1FX6201HK

8 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 84lbs/38kgMRC-1F08211FK

9.9 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 84lbs/38kgMRC-1F10201FK

9.9 HP Bigfoot FourStroke·Full throttle RPM: 5000-6000·Dry weight: 96lbs/44kgMRC-1F10352HK


Performance:Mercury FourStroke outboards feature large displacement for more torque and improved performance. That means quick planing and more fun for skiers and tubers - better fuel efficiency across the powerband - and top-end speed to spare.

Clean Power:All Mercury outboards are designed to run clean, helping to protect the environment for generations to come. From Verado, to FourStroke, to OptiMax, we offer more CARB Three-star Ultra-low Emissions outboards than any other manufacturer. So not only can you pass your Mercury outboards to the next generation, you’ll also be able to show them your favorite fishing spots.

Corrosion:Not all alloys are made equal. Aluminum alloys with less copper content are superior in resisting corrosion. Copper, a weaker metal, reacts with water and aluminum and sacrifices itself to protect the stronger aluminum metal. The more copper in an aluminum alloy, the more likely it will corrode.

Mercury Marine is the industry leader in producing its own aluminum alloys with very low copper content. No competitor alloy even comes close. Mercury’s aluminum alloys contain less than .20 percent copper, while the competition uses alloys with 10 to 20 times more copper content.

Call for current pricing

NEW


Travel 1003 Electric Outboard Motor·The Travel 1003 motors are the most robust, efficient electric outboards on the market. The 1003 has more horsepower, higher efficiency battery capacity, and an on-board-computer (including GPS and real-time range calculation). 3 HP output combined with lithium battery technology provides quiet, clean and low-maintenance power.

Compared to today’s modern 4-stroke outboards, electric motors are a more economical solution that is also better for the environment. Advantages include no oil changes, record efficiency, and usable on protected waters that ban traditional gasoline outboards. Available in a Short (23”) or Long (28”) shaft length.

The Ultimate in Electric Outboards

The perfect outboard for tenders & dinghies

Charge the battery while

underway with a foldable solar

panel. Sold separately.

MAPP $1,999 Call for current price


Teleflex Seastar I & II Helm Pumps·Teleflex Seastar helm pumps are the perfect replacement for your boat’s worn out hydraulic steering. These pumps are easy to install, and fit most 3 inch dash holes for a clean, factory look.

Teleflex QCII Steering Cables·Teleflex QC II Replacement Steering Cable Assemblies are a direct Replacement for Teleflex SSC62 and SSC72 and fit most Teleflex rotary helms made after 1968. The QC II features the patented Quick Connect cable hook-ups. These cables can be used on boats with inboards, outboards & stern drives, with single or twin motors. Kit comes with converter to change threaded-spigot helms into quick-connect helms.

Teleflex Seastar Hydraulic Oil·Seastar hydraulic oil is for use in all Seastar Hydraulic steering systems, and meets Military Spec. H-5606 G. This high quality fluid is the required steering fluid for Seastar Steering systems under warranty.

Size Item # PriceQuart TEL-HA5430 $23.99Gallon TEL-HA5440 $83.00

Starting at $5099

Starting at $9499


Teleflex Hydraulic Seal Kit For Outboard Cylinders·Replacement hydraulic seal kit for Seastar front mount hydraulic steering cylinders on outboard motors. Kit fits most outboard boats with single or twin engines. Seal kit HS5157 comes with 2 seal glands, pin wrench and guide tool.TEL-HS5152 $50.99TEL-HS5153 $50.99TEL-HS5157 $114.99TEL-HS5167 $97.99

We now carry the entire Racor Line

Lou working on the lines of his next project. Photo Halsey Fulton

Starting at $34499

StarTron Gasoline Engine Fuel Treatment·Reduces emissions, prevents fuel oxidation, & stabilizes fuel chemistry for at least 1 year. Gas-oline formula eliminates carbon build-up in fuel delivery system & exhaust components to increase fuel economy up to 15%.

StarTron Diesel Engine Fuel Treatment·Eliminates algae & fungal growth without the use of poisons. Reduces all emissions, including carcinogenic particulate smoke. Prevents fuel oxidation & stabilizes diesel chemistry for at least two years.

Size Item # Price8 oz. STA-93108 $16.9916 oz. STA-93116 $27.9932 oz. STA-93132 $47.99

Size Item # Price8 oz. STA-93008 $8.9916 oz. STA-93016 $15.9932 oz. STA-93032 $19.99

Starting at $9499

Starting at $19999


Racor Fuel Filters·Racor is the Industry Leader in Fuel Filtration Systems. We are proud to carry the entire Racor line for your marine engine. Call or visit us online.

Racor Turbine Series Diesel Fuel Filters·Racor Turbine Series Diesel Fuel Filters provide heavy duty, high capacity water separation and fuel filtration for marine service. Made of rugged, non-corrosive die-cast aluminum with a glass bowl designed for diesel fuel only.

JD TECH TIP: Fuel blended with Ethanol attracts moisture. Ethanol will draw moisture from the air and mix it with the fuel in the tank possibly causing engine damage.To combat this -- We recommend that you inspect fuel filters regularly and Add fuel stabilizer to your tank to slow down the evaporation process and keep the fuel “fresh”.

Todd Gas Caddy - Portable Fuel Tank·This portable fuel system holds up to 28 Gallons of fuel, and can be rolled over land and then along a dock to your boat or Jet Ski. The Gas Caddy is easily moved on pneumatic tires which have nylon bearings preventing sparks between bearings and the aluminum axle. Handle grips and proper design proportions ensure comfortable, easy balance and maneuverability when full.The Gas Caddy features a vented cap and a 10’ long, large diameter U.L. Listed supply hose that facilitates rapid fuel transfer. The hose is easily coiled on two brackets and neatly held in place while transporting.

Easy to assemble

TOD-P32400 $37999

Filters Starting as low as $1369

Moeller Fluid Extractor Pumps·Moeller fluid extractors are pumps that move hot or cold oil faster with less effort. Newly redesigned and available in 2 sizes (5 and 7 liter capacity), they use a dual action vacuum pump that creates vacuum with both the upstroke & downstroke. Comes with 3 extraction tubes and a tethered cap.

Moeller Fluid Extractor Pumps

“After evaluating reviews for virtually every

competing product (electric pumps, many

competitors, etc.) I settled on the ‘Newly

Designed’ Moeller because of it’s double-

action pump (up/dn 14x), compact profile, and non-gimmicky design. It does what it does extremely well. So far I have not found any negatives, it is such a pleasure to just get the job done, done well, & quickly (a few minutes for the

6-qt oil). It has quite strong suction! “

“Excellent”

We now carry the entire Racor Line

En

gin

e


Navigo 10 VSAB Inflatables

·One of our most popular models, these 10’6” RIBs are built with a medium deep “V” for easy planing and superior performance. The raised bow and large diameter buoyancy chambers are designed to assure you of a smooth, dry ride. Extra large internal space, together with the flexibility of stowing the oars either on the top of the tubes or inside the hull, makes transporting passengers, supplies and gear comfortable, stable and safe.10 ft. ABF-NAV10VSGY

Ventus AB Inflatables

·Our midsize light hull inflatable boat, the 9 & 10VL, are built for greater payload capacities. The perfect size for transporting up to four people and more gear (maximum 1373pounds). Bigger tubes and a rigid deep “V” hull provide for an exceptionally dry ride. 9 ft. ABF-VEN9VLGY10 ft. ABF-VEN10VLGY

Ultra Light RIBAB Inflatables

·This 9-foot RIB only weighs 68-pounds. It offers high quality Hypalon tubes and a lightweight aluminum hull. Aggressive non-skid is on the unpainted floor made of 0.25 inch marine grade aluminum. Offering a great compromise for light weight, durability and reasonable pricing. Can carry up to 4-people.Item # ABF-NUL9ULGY

Call for current price

Call for current priceCall for current price

Only weighs 68-pounds!


Shimano Baitrunner D Spinning ReelsShimano’s newly redesigned Baitrunner“D” series includes improvements in the oversized and super ergonomic Septon handle and the addition of the S concept design that provides smooth, silent, and strong operation, with a water resistant Dartanium II drag system that can handle serious abuse from big fish.

(#test/yd) Drag (lb) Ratio Item # Price8/240 10/200 12/160 15.0 4.8:1 SHM-BTR4000D $159.9910/300 12/265 16/170 20.0 4.8:1 SHM-BTR6000D $169.9914/295 17/250 20/195 20.0 4.8:1 SHM-BTR8000D $179.99

Line Capacity Full Max Gear

Testimonial: “With this baitrunner feature you can put your rod in the holder and not worry about losing the fish.”

Penn Level Wind Conventional ReelsThe classic Penn Level Winds are straight-forward, fully functional, and durable reels that are extremely capable of meeting every anglers expectations.

This is a rock-steady reel that will not let you down.

(lb/yds) Drag (lb) Ratio Item # Price15/250 17/220 20/180 10 3.4:1 PNN-9M $54.9917/360 20/290 30/190 10 3.2:1 PNN-209M $59.9917/360 20/290 30/190 10 3.2:1 PNN-209MLH $59.99

Mono Capacity Full Max Gear

Shimano Calcutta B Baitcasting ReelsShimano Calcutta series baitcasting reels have been put to the test by everyone from Tournament Pros to hardcore weekend fishing enthusiasts. The results were A+’s across the board, because the Calcutta series represents the core of Shimano’s quality, versatility, dependability and, most importantly, a smooth drag.

Their versatile sizing ranges from the ultralight 50, which is an ideal freshwater reel, to the 30# class 700 that has won countless battles with Palagics like Sailfish and Dolphin (Mahi-Mahi).

See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 42

(#test/yd) Drag (lb) Ratio Item # Price30/175 40/110 50/105 9.5 5.8:1 SHM-CT100B $199.9940/135 50/130 65/90 9.5 6.0:1 SHM-CT200B $199.9940/120 50/115 65/80 11 6.0:1 SHM-CT200GTB $229.9950/305 65/180 80/160 17.5 5.0:1 SHM-CT400B $229.9950/305 65/180 80/160 17.5 5.0:1 SHM-CT400BSV $229.9950/620 65/375 80/330 18.5 4.7:1 SHM-CT700B $299.9950/620 65/375 80/330 18.5 4.7:1 SHM-CT700BSV $299.99

Line Capacity Full Max Gear

Fis

hin

g

PowerPro Braided Fishing LineThe PowerPro Braided Fishing Line is made with 100% Spectra Fiber. Spectra is a white polyethylene 15 times stronger than steel, yet remains super-thin.

Starting at $1699

Customer photo: Mark Garry earning his Stripes

Rock Steady Fishing Deals!

Length Reel Rod Item # Price7 ft SG3000 SL612S70 PNN-93067 $109.997 ft SG4000 SL1020S70F PNN-94070 $109.997 ft SG5000 SL1220S70F PNN-95072 $119.997 ft SG6000 SL1220S70F PNN-94073 $119.997 ft SG7000 SL1530S70F PNN-97007 $124.99

Penn Sargus Spinning Rod & Reel CombosThese combos consist of the Penn Slammer rod and Sargus spinning reel. They are noted for their added strength and ultra-sensitive blanks.

Size White Item # Price6" x 15" TAY-1025 $48.998" x 20" TAY-1026 $71.9910" x 26" TAY-1032 $108.9912” x 34” TAY-1034 $130.99

Type Dia Item# Roll Length Roll Price3/4 Round 1-1/4" TAY-GG1.253Q.50 50' $317.993/4 Round 1-1/2" TAY-GG1.53Q.50 50' $329.99

Tessilmare RADIAL Flexible Rub RailTessilmare rub rail kits are easy to install & available in various lengths & styles to suit any taste. They can be fitted cold & offer a seamless, finished look.

Size Color Item # Price1-1/4 in. x 46 ft. White MCO-T130-141-004-W $184.991-1/4 in. x 46 ft. Black MCO-T130-141-004-B $184.991-5/8 in. x 52 ft. White MCO-TE130140110-W $349.991-5/8 in. x 52 ft. Black MCO-TE130140110-B $349.992-5/8 in. x 72 ft. White MCO-TE130140115-W $499.992-1/8 in. x 72 ft. Black MCO-TE130140115-B $499.99

Gunwale GuardsFor use on boats, docks, platforms, anywhere protection is needed. The hard sponge-rubber core is covered in heavy woven Dacron. White and stain resistant, it will not mar and is suitable for dock facings, trailers, swim ladders and platforms.

Taylor Made Big B Inflatable CRT Vinyl FendersBig B fender incorporate a Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas. Available in White, Blue, Black, Navy, Sand, Hunter Green & Cranberry.

Maximum Line Orange White Dia Circum\ference Buoyancy Hole Item # Item # Price9” 28” 14 lb 1-1/16” n/a TAY-1140 $34.9912” 38” 33 lb 1-1/16” TAY-61143 TAY-1143 $41.9915” 47” 65 lb 1-1/2” TAY-61146 TAY-1146 $49.9918” 57” 112 lb 1-1/2” TAY-61149 TAY-1149 $65.9921” 66” 180 lb 1-1/2” TAY-61152 TAY-1152 $101.9927” 85” 375 lb 1-1/2” TAY-61155 TAY-1155 $154.99

Taylor Made - Tuff End Inflatable Vinyl BuoysThese buoys are resistant to oil and chemicals, function equally well in tropical heat or arctic cold. Not inflated. Valve located on the side for easy inflation with football needle or compressor. Available in Orange or White.


Fleece Fender Boots Starting at $31.99

Tessilmare Sphaera Rub Rail KitsSphaera is the revolutionary line of fender profiles made of stainless steel and co-extruded with rigid and shockproof vinyl chloride. Installation is greatly simplified and quick compared to traditional rub rails. The highly conformable rigid vinyl base allows cold shaping to the hull without heat.Also available in 70-ft lengths.

Cal-June Pendant Mooring BuoysCal-June Pendant Mooring Buoys are designed with a recessed top to keep your mooring line dry and accessible. The high density polyethylene buoy shell protects your boat topsides from contact with the mooring hardware.

Starting at $13999

Size Profile Size Item # Color Price50 ft 25mm MCO-T130-130-225-W2 White $699.9950 ft 25mm MCO-T130-130-225-W1 Black $949.9950 ft 35mm MCO-T130-130-230-B2 White $1149.9950 ft 35mm MCO-T130-130-230-W1 Black $1299.99

An

ch

or

ing

& Do

ck

ing

Dock Pro Inflatable Vinyl Dock WheelsTaylor Made Dock Pro Inflatable Dock Wheels roll smooth to offer substantial dock cushioning & feature molded-in valves to adjust the level of firmness. Made of heavy duty & super strong vinyl.

Wheel Size Item # Price9 in. Corner Mount TAY-1078 $79.999 in. Straight Mount TAY-1079 $74.9912 in. Corner Mount TAY-1072 $144.9912 in. Straight Mount TAY-1073 $138.9918 in. Corner Mount TAY-1081 $169.9918 in. Straight Mount TAY-1082 $159.99

Dock & Anchor Line - 3 StrandThese lines are made from premium three strand nylon. They offer incredible durability, excellent handling and long life. Treated with a water repellent for the ultimate resistance against abrasion. Sold in increments of 100’ lengths.

Dia Item # Price (ft) 3/16" NER-7050-06-00600 $0.191/4" NER-7050-08-01200 $0.295/16" NER-7050-10-00600 $0.623/8" NER-7050-12-00600 $0.591/2" NER-7050-16-00600 $0.705/8" NER-7050-20-00600 $1.473/4" NER-7050-24-00600 $1.95


See our full selection onlinewww.JamestownDistributors.com

Windline Over-Platform Drop LadderThe Windline over platform drop ladder is made of thick-wall stainless steel tubing and is electropolished to prevent corrosion. Available in 2, 3 or 4 step, the ladder folds flat over onto the platform to save space by providing compact storage. 2-step measures 23-1/3” x 12”. 3-step measures 34”x12”. 4-step measures 44”x13”.

Size Item # Price2 step WIN-TDL2X $89.993 step WIN-TDL3X $96.994 step WIN-TDL4X $166.99

Size Item # Price3 step WIN-DL3X $139.994 step WIN-DL4X $149.99

Beckson Hook-Mate Boat Hook

Beckson Hook-Mate boat hooks are strong and lightweight. Their non-conductive plastic clad design prevents them from sinking if dropped in the water. Vinyl clad shafts will not splinter or crack, ensuring long term usage. They range in sizes from 3-7 feet and come with a 5 year guarantee.

From $1899

Windline Over-Platform Drop Ladder“Replaced a 2-step ladder that had our old bones creaking and knees bending trying to get out of the water. This is much safer, easier, and makes getting into the boat a breeze after an hour of snorkeling or swimming. Highly recommended.“

“Must-have for getting into a boat”

Windline Sport/Diver Boarding LadderWindline Sport/Diver Boarding Ladders are heavy duty, with a load capacity rated to 400 lbs. Constructed of high quality, 1-1/2 inch thick walled stainless steel tubing that has been electropolished for superior corrosion resistance. Ladders include mounting bracket with secure locking faspin and quick release for easy stowage.

Lewmar Delta AnchorsLewmar Delta anchors in six weights, ranging from 9 to 55 lbs. Delta series boat anchors are made of high grade manganese steel for maximum tensile strength. Lewmar’s patented shank profile and ballasted tip mean these anchors are self launching. Due to their low center of gravity and self righting design, they set immediately without dragging or sliding along the bottom.

Starting at $8189

Double Braid Mooring PennantsNovagold

·Novagold Nylon Double Braid Mooring Pennants are extremely durable. Professionally hand-spliced eye, heavy duty galvanized thimble, and a movable anti-chafe sleeve. All pennants are finished with a hand dipped special urethane coating to prevent marine growth and to increase abrasion resistance. Double pendants consist of (2) standard single pennants connected by a galvanized sling link at the base.

Length Diameter Item # Price12 ft. 1/2 in. RWE-DBMP12X12 $77.9915 ft. 1/2 in. RWE-DBMP12X15DOUBLE $182.9912 ft. 1/2 in. RWE-DBMP12X12DOUBLE $182.9915 ft. 1/2 in. RWE-DBMP12X15 $79.9912 ft. 5/8 in. RWE-DBMP58X12DOUBLE $243.9912 ft. 5/8 in. RWE-DBMP58X12 $88.9915 ft. 5/8 in. RWE-DBMP58X15DOUBLE $217.9915 ft. 5/8 in. RWE-DBMP58X15 $92.9915 ft. 3/4 in. RWE-DBMP34X15DOUBLE $273.9915 ft. 3/4 in. RWE-DBMP34X15 $111.9912 ft. 3/4 in. RWE-DBMP34X12DOUBLE $263.9912 ft. 3/4 in. RWE-DBMP34X12 $135.99

From $0.18

to $2.11

Amsteel Blue·12 strand braided rope utilizing Dyneema SK-75 fiber, Samson Parallay design, and blue Samthane coating. Amsteel blue offers one of the highest strength-to-weight ratios and conveniently floats. It has superior flex fatigue and wear resistance making it stronger than wire rope.

Available in Blue and Silver. Sizes available: 1/16”, 7/64”, 1/8”, 3/16”, 1/4”, and 5/16”.Sold by the foot.

Catch these Great Rope DealsDouble Braided Nylon Dock LineUnicord Double Braided Nylon Dock Lines are preshrunk and heat stabilized. They offer higher wet strength and better abrasion resistance than other competitive nylon dock lines. These lines feature a 15” eye splice & will resist mold & mildew.

Size Color Item # Price 1/2" x 15' White UNC-440078 $12.99

Gold & White UNC-440238 $16.99Black UNC-440986 $17.99Navy Blue UNC-441433 $17.99

1/2" x 25' White UNC-440092 $22.99Gold & White UNC-440252 $24.99Black UNC-441006 $26.99Navy Blue UNC-441457 $26.99





Sta-Set Polyester Double Braid·These high performance, high strength lines have a low stretch polyester double braid. Sta-set offers great durability and remains soft over time. It is flexible and easy to handle and splice. Ideal for most running rigging applications (Sheets, Control lines, Cruising halyards...).

Dia Item # Price (ft) (600' spool)1/4" NER-2100-08-00600 $0.71 $426.005/16" NER-2100-10-00600 $0.93 $558.003/8" NER-2100-12-00600 $1.12 $672.007/16" NER-2100-14-00600 $0.99 $594.001/2" NER-2100-16-00600 n/a $1,125.32


New England Cyclone Mooring PennantsConsist of strong, durable Endura-12 rope made from Dyneema fibers. Pairing this to the end of your standard nylon mooring pennant adds the benefit of a floating, low stretch and abrasion resistant section where you need it most, at the chock.

Length Diameter Item # Price5 ft. 5/8 in. NER-54T93-20 $149.996 ft. 3/4 in. NER-54T03-24 $179.9912 ft. 3/4 in. NER-54T13-24 $249.9912 ft. 7/8 in. NER-54T13-282 $309.9912 ft. 1 in. NER-54T13-32 $399.99

NewItem

Ma

rin

e S

up

pl

ies

Galvanized Dock Cleat·Our heavy duty Dock Cleats are made from hot dipped galvanized iron for corrosion resistance. Rugged construction makes them perfect for docks, fishing boats and workboats. The large open base is designed to easily handle multiple dock lines and distribute heavy loads.

Length Fastener Size Item # Price4” #10 WC401G4 $1.995” #10 WC401G5 $2.496” 1/4” WC401G6 $3.998” 5/16” WC401G8 $5.9910” 3/8” WC401G10 $8.9912” 3/8” WC401G12 $17.9914” 1/2” WC401G14 $19.9918” 1/2” WC401G18 $42.99

Open Base Cleat316 Stainless Steel

·These Schaefer open base cleats feature smooth, generous radius edges that reduce line chafe and extend line life. Constructed from 316-grade stainless steel, these cleats are electro-polished to provide a strong, attractive finish.Length Fastener Size Item # Price3” #8 F.H. SCH-6075 $21.994.74” #10 F.H. SCH-60120 $26.996” 1/4” F.H. SCH-60150 $33.998” 5/16” F.H. SCH-60200 $55.9910” 3/8” F.H. SCH-60250 $79.99

OarlocksStraight Chocks316 Stainless Steel

·These Straight Chocks are made of solid 316 grade marine stainless steel for the ultimate in appearance and corrosion protection. They can accommodate lines up to 3/4 inches in diameter. For use with #10 Fasteners. Sold by the Each.Length Item # Price5” SDG-0602001 $15.996” SDG-060210-1 $17.99

Bow Chocks 316 Stainless Steel

·Stainless steel bow chocks used to lead lines over port and starboard bow rails of a vessel while minimizing line and deck abrasion of working lines under load. These chocks are made of investment cast 316 stainless steel with the proper slant for a bow lead. Sold as a Pair.Length Item # Price4-3/4” SDG-0600401 $20.996” SDG-0600431 $45.99

Ribbed Horn Oarlocks

ID Finish Shank Item # Pair2” Bronze 1/2” BUC-00OL4HB $41.992" Zinc 1/2" PKO-1262DP0ZNC $12.99

Ring ID Finish Shank Item # Pair2" Bronze 1/2" SDG-580590-1 $36.992" Bronze 1/2" BUC-00OL5ROB $47.992" Zinc 1/2" PKO-1267DP0ZNC $12.992-1/4" Bronze 1/2" BUC-00OL5RIB $35.99

Round Oarlocks

Let’s get on the water!Closed Base CleatsPolished Brass

·These closed base cleats have a polished, cast brass construction which offers a classic appearance while battling the harsh effects of marine environments.

Length Fastener Size Item # Price3” #6 SDG-042103-1 $14.994” #12 SDG-042104-1 $23.995” #12 SDG-042105-1 $27.99


Dock Edge Solar Dock Light·Stainless base with built in stainless cleat is illuminated by a completely wireless solar light for easy docking and launching in low visibility. Light mounts on a sturdy steel base, housed inside a vinyl pillar. Easy to install and no wiring required.

DEI-96250F $9999

Length Hose Style Diam. Item # Price18” 24 in. Flexible 1-1/4” BEC-118PF $23.9924” 24 in. Flexible 1-3/4” BEC-124PF $28.9924” 6 ft. Flexible 1-3/4” BEC-124PF6 $39.9936” 36 in. Flexible 1-3/4” BEC-136PF $34.9936” 6 ft. Flexible 1-3/4” BEC-136PF6 $41.99

Thirsty-Mate Pumps“I have two of these, the 1-1/4 size and the 2” size. The smaller one was purchased around 1967 and I still use it every day to bail the dinghy. You can’t beat that! The larger one really moves a lot of water.”


Drainman Bilge Pump·Wind and waves cause a tug and pull effect on your boat’s mooring line. The Drainman uses this energy to pump out water from your bilge. No electricity and no wiring required. This innovative design can pump up to 660 gallons of water per day. It’s easy to install, handy to carry, and locks in place.

Item # DRN-DRAINMAN1

Only $45

No Electricity Required!

List: $75.00

Save $30

·The BOS Synthetic Oars are a low cost alternative for boaters who prefer synthetic (aluminum shaft and blades) construction. Aluminum oars are lightweight, strong, durable, and won’t rot. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, 7-1/2ft, and 8ft.

Starting at $2799 ea.

·High quality wooden oars offer a superior value at an excellent price. Made from Canadian spruce, each oar is turned on the long grain assuring no cross grain weakness. Round taper handle design assures comfortable grip. 3 piece laminate blade is secured with marine adhesive. Each oar is sanded and finished with a true clear varnish. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, 7-1/2ft, & 8ft.


·These Basswood Oars feature select bass wood to offer a strong but lightweight oar. These oars handle nicely with great balance and are offered at a value price. Single coat synthetic varnish finish. They are a perfect natural wood looking utility oar for everyday use. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, and 8ft.


Varnished Spruce Wood Oars

Caviness Basswood Oars

Caviness BOS Synthetic Oars

Beckson Thirsty-Mate Pumps·These have been around for years -- and there is a reason why. Thirsty Mate, hand bilge pumps are easy to use and they are reliable in any boating situation.

Bill rowing out to check the boat on a quiet morning. Photo Mark Corke.

Ma

rin

e S

up

pl

ies

Ritchie Supersport Compasses·Ritchie Supersport compasses deliver steadiness, performance and accuracy in a flush mount design, whether racing or headed offshore. High visibility blue dials and extra large white numerals make these compasses easy to read. Available in Black and White.

Mnt Hole Mount Item # Price4-3/4” Flush RIT SS1002 $174.994-3/4” Flush RIT SS1002W $199.995-1/8” Flush RIT SS2000 $359.995-1/8” Flush RIT SS2000W $359.99

Type Item # PriceAir Horn Kit SCP-46111 $24.99Refill Only SCP-46101 $17.99

Portable Air Horn·Air horns provide portable sound warning systems for boating, sporting events, etc. Signal horns are filled with Tetrafluoroethane gas, a non-flamable, safe gas. Refills of 8 oz. gas canisters are also available.


JD Tech Team:

Matt Specializing in sailboat hardware, tools & paint systems. { 10 years in industry }


Magma Marine Kettle Gas Grill·This Marine grade Stainless Steel Kettle grill is Magma’s most economical answer for open cockpit grilling. Available in the Standard 15” diameter or the 17” diameter party Size. 100% 18-9 stainless steel. This grill has all the basics of Magma’s superior weather proof grill design without added extras of combination kettle grill.

Size Item # Price15 inch MAG-A10205 $154.9917 inch MAG-A10215 $179.99

Dual Trumpet Air Horns·AFI dual trumpet air horns put out 121 decibels, so you can be assured of being heard. The low frequency travels fast and far over water. The Dual Trumpet Air Horn comes in two different models one with a chrome plated solid brass finish, & one with a white epoxy powder-coated finish over solid brass.

Starting at $22999

We can’t fit everything into this catalog.There are more than

70,000 items online at:JamestownDistributors.com

Zinc Anodes·Sacrificial Anodes are placed on hulls, propeller shafts, rudders, trim tabs, outboard engines, stern drives, and in the cooling system of most inboard engines to protect metal parts from galvanic corrosion. Marine anodes are available in zinc, aluminum and magnesium metals to protect different hardware items and other metal boat components. We are proud to carry a larger selection of zinc anodes to protect your boat. Call or visit us online.

We carry a huge offering of Zinc Anodes. Please call for pricing


For boatersand their craft

Rockport Marine

Customers since: 1980

Location: Rockport, Maine

Speciality: Wooden boat construction, restoration, & design

Rockport Marine Inc. was founded in 1962 by Luke Allen. Tucked at the head of the harbor on the west side of Penobscot Bay in Rockport, Maine, the shop opened its doors as a storage and repair facility for

wooden boats. Upstairs from the shop was the Sail Loft Restaurant, run by Luke’s wife Norma. From the

restaurant, patrons could watch the comings and goings in the boatyard and the antics of the famous seal, Andre.

Since that time, Rockport Marine has grown in reputation to become one of the industry’s premier

wooden boat yards. Specializing in new construction, restoration, and design work, RMI has built a wide

variety of boats, from traditional plank-on-frame to modern wood-composite vessels. Rockport Marine

offers design services, storage facilities, and has an on-site metal fabrication shop, and 55-ton boat hoist.


Photo www.langleyphoto.com


Knowledgeable AdviceFrom the JD Tech Team

For one-on-one help choosing the right equipment for your project you can speak with one of our advisors at 401-253-3840 or email your questions at [email protected]

Victron BMV 600 Battery Monitor·The new Victron BMV 600 high precision battery monitor accurately calculates battery ampere-hours used and charge state. Ampere-hours consumed are calculated by integrating the current flowing in or out of the battery.

VIC-BAM001004000 $14499

Victron Battery Monitor“Perfect monitor that was easy to setup. The one thing you need to watch is your ground terminal. Make sure you have all of your grounds terminated in one place, then connect it to the shunt. This way you can capture all of your energy use. Perfect performance from the start - wish I would have installed this sooner.”

“Must have for any boat”

Overheat ProtectionInternal thermostat cuts power at first sign of overheating

Locking featureSide locking

levers snap onto sides of inlet

WeatherproofingFace gasket keeps moisture away from electrical pins

Connector Body ShapeSleeve-design fits snugly within inlet, removing any tension from pins

Electrical PinsStraight pins with 20x surface area. No twisting.

Ease of UseUnique shape only goes in one way. Easy to orient with no chance of misalignment. Pushes straight in & locks automatically.

SmartPlug Dual Configuration Cordset·The SmartPlug 30 Amp/125 Volt Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. Requires compatible SmartPlug 30 Amp Boatside Inlet (BM30S) installed on boat.

Size Item # Price25 ft SMP-C30253 $119.9950 ft SMP-C30503 $149.99

Ganz GSP Marine Grade Solar Panels·Ganz solar panel construction features an unbreakable plastic film surface with a semi-flexible aluminum backing. Ganz GSP solar chargers use thin, semi-flexible panels packed with the highest conversion efficiency solar cells available.

Starting at $86

Output Current L x W x H Item # Price6 Watts/ 0.39 Amps 0.42 Amps 11.8” x 10” x 0.6” GAN-GSP-6 $86.0012 Watts/ 0.78 Amps 0.86 Amps 15.8” x 14.1” x 0.6” GAN-GSP-12 $149.0030 Watts/ 1.74 Amps 1.93 Amps 22.1” x 20.5” x 0.6” GAN-GSP-30 $344.0040 Watts/ 2.3 Amps 2.52 Amps 29.8” x 18” x 0.6” GAN-GSP-40 $464.0055 Watts/ 3.2 Amps 3.56 Amps 34.6” x 20.5” x 0.6” GAN-GSP-55 $644.00

Max. Short-circuit

257-piece Heat Shrink Connector Kit·This fantastic kit comes in a steel carrying case.·Includes (110) assorted 22-10 heat shrink butt connectors.·(145) assorted 16-10 ring terminals.·A crimp ratchet tool.·A mini butane pocket torch.

ANC-320001

Only $26999

600-Piece Nylon Insulated Connector Kit·This steel carrying case will keep all your connectors organized.·Includes an assortment of butt connectors, ring terminals, insulated male & female disconnects, and flanged spade connectors.

Terminal Kit·This is a great, very economical kit to help you with a wide range of electrical projects.·Includes assorted butt connectors, ring terminals, disconnects and nylon cable ties. Also 10’ of assorted spools of UL 1426 boat cable and 5 pieces (3” x 3/8”) heat shrink tubing. Also includes a Crimp tool.

El

ec

tr

ica

l

ANC-250001

Only $18999

ANC-220020

Only $7499

BLU-5026

Only $4599 BLU-5025

Only $3494

Blue Sea Systems ST Blade 6 Circuit Fuse Blocks·Blue Sea Systems ST (screw terminal) blade fuse blocks provide up to 6 circuits for marine duty electrical systems. Available with or without a negative bus terminal strip. Blocks are available with or without cover. Fuses sold separately.

Blue Sea Systems 12 Circuit ST Blade Fuse Blocks·Blue Sea Systems ST (screw terminal) blade fuse blocks provide up to 12 circuits for marine duty electrical systems. Available with or without a negative bus terminal strip. Fuse blocks are available with or without cover. Fuses sold separately.


Don Eley discussing the benefits of Marine Tinned wire in our Electrical Systems Video Series. You can see this offcenterharbor video and others on our website.

Hardwall Exhaust HoseA premium wire reinforced marine hose. Designed for engine intake, bilge discharge, toilet and holding tank connections. Sold in either 6ft or 12ft lengths. Meets SAE J2006R2 BurstID OD psi Item # Min Price

1/2" 27/32" 500 psi SHI-250-0124 6ft $4.225/8" 1" 420 psi SHI-250-0584 6ft $5.933/4" 1-3/32" 380 psi SHI-250-0340 10ft $4.137/8" 1-3/16" 320 psi SHI-250-0784 12-1/2ft $5.661" 1-11/32" 280 psi SHI-250-1000 10ft $4.451" 1-5/16" 280 psi SHI-250-1004 12-1/2ft $5.201-1/4" 1-19/32" 240 psi SHI-250-1144 12-1/2ft $5.371-1/2" 1-53/64" 200 psi SHI-250-1124 6ft $7.761-1/8" 1-7/16" 260 psi SHI-250-1184 12-1/2ft $6.881-3/8" 1-23/32" 220 psi SHI-250-1384 12-1/2ft $6.481-5/8" 2" 175 psi SHI-250-1584 6ft $7.901-3/4" 2-1/8" 175 psi SHI-250-1344 6ft $8.601-7/8" 2-19/64" 160 psi SHI-250-1784 6ft $9.152" 2-13/32" 160 psi SHI-250-2004 12-1/2ft $10.022-1/2" 2-7/8" 260 psi SHI-250-2124 12-1/2ft $11.612-3/8" 2-3/4" 260 psi SHI-250-2384 12-1/2ft $8.452-5/8" 3-1/16" 230 psi SHI-250-2584 12-1/2ft $11.582-7/8" 3-5/16" 220 psi SHI-250-2784 12-1/2ft $12.833" 3-7/16" 220 psi SHI-250-3004 12-1/2ft $14.753-1/2" 4" 190 psi SHI-250-3124 12-1/2ft $20.033-1/8" 3-5/8" 200 psi SHI-250-3184 12-1/2ft $16.474" 4-5/8" 170 psi SHI-250-4004 12-1/2ft $27.244-1/2" 5-3/32" 250 psi SHI-250-4124 12-1/2ft $18.906" 6-21/32" 130 psi SHI-250-6004 12-1/2ft $31.56

Shields Premium Rubber Sanitation HoseShields premium rubber sanitation hose provides excellent flexibility, bend radius and maximum protection from odor permeation and toilet chemicals. It is designed specifically for use with the most critical toilet and holding tank connections. Available in lengths of 12.5’ or 50’. Size Item # Roll

1-1/2" x 12-1/2” SHI-101-1124 $64.771-1/2" x 50’ SHI-1011120 $256.94


Seaward Water HeatersSeaward marine water heaters run on 110/120V AC shore power or convert engine heat with heat exchangers while underway to efficiently create hot water. These water heaters can hold anywhere from 6-11 gallons of water. All Seaward heaters have galvanized steel exterior with aluminum tank interiors, hold down brackets and ignition protection. Dual wall heat exchangers are front mounted on “F” models and rear mounted on “S” model water heaters.

Starting at $24999

Jabsco Electric Marine ToiletsJabsco electric toilets feature dual function pumps to eliminate messing around with hand pumps and dry bowl valves. The push button self-priming flush pump rinses the bowl as waste macerator and high capacity scavenger pump grind up waste and pump it out. Install this compact electric marine head where space is limited. All Jabsco electric toilets come with a heavy duty push-button switch with 5/8 in. to 3/4 in. ID inlet hose connector and 1 in. to 1-1/2 in. hose adapter for the discharge hose.

Starting at $37999

See our full selection onlinewww.JamestownDistributors.com

Jabsco Manual Marine ToiletsFunctional and stylish. Economical. Pump assembly is angled forward to provide natural smooth stroke action and convenient top mounted dry bowl selector is easy to operate. Pump and base can be assembled for left hand installation. External surfaces are smooth and have been contoured for easy cleaning.

Starting at $16999

Shurflo Aqua King Water PumpsShurflo Aqua King fresh water pumps are designed for self-contained boats and RVs with multiple fixture water systems. Built specifically for the harsh marine environment, Aqua King pumps incorporate sealed switches and e-coated motors.Automatic system operation provides instant flow from water tank to faucet when a fixture is opened. Closing the faucet automatically discontinues pump operation. Snapfit ports simplify both installation and removal for routine service.

Starting at $7999

Pl

um

bin

gShurflo Blaster Washdown PumpShurflo Blaster pumps provide powerful, continuous flow of water for serious marine washdown jobs such as cleaning grimy boat decks, scaling, fish boxes, anchor chain, and more. Complete with non-corrosive heavy duty hose spray nozzle, Blaster washdown pumps move water up to 45 psi and at 3.5 to 5 gallons per minute. Shurflo pumps deliver high lift, can run dry without damage, and will not overheat with extended use.

Rule-Mate Fully-Automated Bilge PumpsQuiet and compact pumps that activate when the water level is 2-1/8”. The pump and non-mercury float switch are in a single, compact housing. No on/off cycling so no power is used until the pump comes on. Clear debris quickly and easily with the removable strainer and easy access impeller area.

Capacity Hose Item # Price500 gph 3/4” RUL-RM500 $52.99750 gph 3/4” RUL-RM750 $72.991100 gph 1-1/8” RUL-RM1100 $79.99

Capacity Hose Item # Price210 gph 1/2” SHU-39012214 $114.99240 gph 1/2” SHU-49014282 $159.99


James G.Location: Plymouth, MA

Customer Since: 2009

“My project is a 30’ catamaran that my girlfriend and I have been working on for 4 years. I’m 25 years old and have dreamed of living the cruising lifestyle for years. The cat is plywood/epoxy/fiberglass with a lot of core material thrown in there. If I work hard enough this winter, it may see the water this upcoming summer!”

For boatersand their craft

Select Plus

FPT-FMM-250Q-Select-Plus

Only $29999

Turbo II Variable Speed Vacuum·The Fein Turbo II vacuum is designed for heavy, continuous use in industrial and professional environments. This variable speed dust extractor is powerful enough to run TWO 6-inch random orbit sanders. Use the Turbo II with Fein dust-free tools and abrasives for 98% dustless efficiency. This is achieved while keeping noise levels to an absolute minimum (60 D.B.A or less at 3-1/2 feet). Fein vacuums are ideal for carpenters, woodworkers, and boat yards for fiberglass & refinishing.

FPT-9-20-25

Only $29999

Marine Top Kit

FPT-FMM-250Q-TOP-MARINE

Only $499

The Fein Multimaster is the Best multitool available

Powerful, quiet & easy to move

around.

FPT-FMM-250Q-Top-Plus

Only $399

Fein MultiMaster Top Plus·The FMM250Q Top Plus is our most popular Multimaster package. It features the QuickIN quick-change accessory feature. Includes over 30 sanding sheets, several saw blades, sanding pads and more. The Top Plus is the most comprehensive Multimaster package and includes accessories for just about any sawing, scraping, grinding or sanding job.


See all of the Multimaster Kits online

Waveblade Power Barnacle Remover·The Waveblade is a new hand held power tool that quickly removes barnacles and other growths from your boat. Its powerful oscillating blade clears barnacles effortlessly without damaging your boat’s finish. It’s submersible up to 15 ft. A 45 ft power cord plugs into any 12v lighter style outlet. The included assortment of blades let you select the best blade for the job. Dive under the boat or pull your car up next to your hauled-out boat.

Heavy Duty Polisher·This is a good general purpose polisher at a great price! Variable speed with electronic control that maintains a constant speed under load. It has a Lock-On switch for continuous use at one speed. Also features a “Soft Start” for improved tool control. Variable Speed 1000-3300 RPM. BUF-PS07401

Only $9499

Rotex Sander RO 150 FEQ·Festool’s dual-mode Rotex sander gives you the choice of two sanding motions: random orbital for fine sanding, and Rotex rotary or random orbital motion for fast material removal in rough sanding or for polishing.You can switch between modes in seconds by simply hitting a switch, eliminating the need to change to another tool. This saves you time and the cost of a second sander.

FES-571810--RO 150 FEQ

Only $535

The Rotex allows you to choose between Random

Orbital or Rotary, and Sanding or Polishing.

To

ol

s

Fein 6 Inch Random Orbital Sander·Fein 6 inch Random Orbital Sander is a heavy-duty commercial grade random orbital sander with direct dust extraction. These sanders can be a big help in reducing the airborne dust and in reducing production time. These are top of the line commercial sanders. This 6” sander gives you power and maneuverability without the weight of the 8”. Includes Hook & Loop pad.

FPT-MSF-636-1

Only $49999


Completely waterproof

Biofouling Removal Blade

Powerful Oscillating Head

Sensitive Touch Switch Operation

Ergonomic Body

Simple Blade Changing

Protective Aluminum Knuckle Guard

Lanyard Attachment Point

Remove Barnacles Easily

WBD-WBACC01401

Only $29999

Fuller Countersink Set #8·This is our most popular Countersink Set! It should last a liftetime if taken care of. Contains five type C countersinks for wood screw sizes #6, 8, 10, 12, and 14 with 3/8” and 1/2” cutting diameters. Five matching taper point drills, 3/8” and 1/2” stop collars, 3/8” and 1/2” plug cutters, and two hex keys. All included in a really nice-looking mahogany case.FUL-10393008

Only $9199

FUL-10393011

Only $12099

Fuller Countersink Set #11·This is your countersink set for your average to larger screw sizes and set up with the Quick-Change Hex shank system. The #11 set contains everything you need to pre-drill and plug for screw sizes #6, 8, 10, 12, and 14 - all with 1/4” Quick Change hex shanks. It has five Quick Change Taper Point drills with matching countersinks, 3/8” and 1/2” Stop Collars, 3/8” and 1/2” Quick Change Plug Cutters, Quick Change Chuck Adapter, and 2 Hex Keys all in a mahogany case.


We carry the entire line of Fuller Drill Bits and Countersinks on our website.

A quiet moment at Bristol Boat Company workshop. Photo Stephanie Ewens.

Wood Screw Size Item # Price

2 5/64" FUL-20100078 $5.803 3/32" FUL-20100093 $5.524 7/64" FUL-20100109 $5.665 1/8" FUL-20100125 $5.526 9/64" FUL-20100140 $5.887 5/32" FUL-20100156 $5.888 11/64" FUL-20100171 $5.419 3/16" FUL-20100187 $5.6510 13/64" FUL-20100203 $5.3712 7/32" FUL-20100218 $5.4914 15/64" FUL-20100234 $6.5514 1/4" FUL-20100250 $6.9316 17/64" FUL-20100265 $8.1916 9/32" FUL-20100281 $8.8918 19/64" FUL-20100296 $9.5218-20 5/16" FUL-20100312 $9.7820 21/64" FUL-20100328 $10.6820 11/32" FUL-20100343 $11.5724 23/64" FUL-20100359 $13.5124 3/8" FUL-20100375 $12.78

Taper Point Drills·Made of High Speed Steel to hold their sharp cutting edges longer. This is a general purpose type Taper Point bit and is recommended for most jobs jobs whether in a drill press or in handheld equipment. Cuts well in both soft and hardwoods.More sizes available online.

Type Material Length Item # Price Shape

#49 2nd Cut, Narrow Pattern (Rasp)

Wood 10" NIC49 $33.99

#50 Smooth, NarrowPattern (Rasp)

Wood 10" NIC50 $39.99

#1 Wooden Handle 4-7/8” x 1 5/16”

NIC1 $2.99

Great Value

To

ol

s

Two Cherries Chisel Set·These chisels are made of the highest quality German steel. This set of 6 wooden handled chisels comes with a fitted wooden box to protect during storage. The German-made Two Cherries chisels are carefully forged blades that are heat treated in an immersion bath method to achieve a Rockwell hardness of 61º C. This means that sharpening the chisels may take a few minutes-- but they will hold an edge significantly longer than almost any other chisel. Set of six contains: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”

RLC-5001561

Only $14099

Wood and Composite Moisture Meter·Designed for the detection of wetness in fiberglass & wood. Besides its sturdy construction, the GRP-33 model comes packed in a soft sided compartmentalized instrument case. The dial face, analog meter clearly indicates moisture levels in fiberglass up to 3% and in wood up to 30%.

JRO-GRP33

Only $34999


Nicholson Cabinet RaspsHandles not included.·#49 2nd Cut, narrow pattern (rasp) half round and tapered. This is a high quality, woodworker, cabinetmaker’s wood rasp. It has a narrow pattern and cut edges. Leaves a relatively smooth finish but is rougher than the #50.

·#50 Smooth, narrow pattern (rasp) half round and tapered. This is a high quality, woodworker, cabinetmaker’s wood rasp. It has a narrow pattern and cut edges. Leaves a relatively smooth finish. Often used after #49.

Handles not included. These Cabinet rasps are designed for use with #1 metal ferruled handle. White Birch with shellac finish.

FREE Shipping on the JD Mobile Site

Use your smartphone to research & shop at

Jamestowndistributors.com and get Free Shipping on orders over $50! Limited time offer. Some

exclusions apply. See website for details.

Stainless SteelWood Screws - Phillips18-8 stainless steelFlat HeadWood screws have coarse & deep threads to better anchor into the wood. Phillips drive allows for greater torque application when fastening. Stainless steel provides strong corrosion resistance.Size Length Part # Price (100)6 1/2" FSSWSFP6X1/2 $6.20

3/4" FSSWSFP6X3/4 $7.041" FSSWSFP6X1 $7.98

8 3/4" FSSWSFP8X3/4 $10.561" FSSWSFP8X1 $11.441-1/4" FSSWSFP8X11/4 $16.501-1/2" FSSWSFP8X11/2 $13.421-3/4" FSSWSFP8X13/4 $17.752" FSSWSFP8X2 $17.85

10 1" FSSWSFP10X1 $13.861-1/4" FSSWSFP10X11/4 $15.751-1/2" FSSWSFP10X11/2 $16.891-3/4" FSSWSFP10X13/4 $17.852" FSSWSFP10X2 $20.692-1/2" FSSWSFP10X21/2 $32.55

12 1-1/2" FSSWSFP12X11/2 $23.101-3/4" FSSWSFP12X13/4 $31.502" FSSWSFP12X2 $28.352-1/2" FSSWSFP12X21/2 $51.453" FSSWSFP12X3 $49.35

14 1-3/4" FSSWSFP14X13/4 $36.752" FSSWSFP14X2 $50.612-1/2" FSSWSFP14X21/2 $40.953" FSSWSFP14X3 $60.06

Single Auger Point Deck ScrewsSquare Drive Flat Head 18-8 stainless steelExcellent for outdoor applications. Self Drilling Type 17 Auger points are great for pressure treated lumber & other decking materials.

Size Item # Price (100)6x1-1/4 FSSQC6X11/4 $5.576x1-5/8 FSSQC6X15/8 $6.838x1-1/4 FSSQC8X11/4 $7.788x1-5/8 FSSQC8X15/8 $8.558x2 FSSQC8X2 $11.768x2-1/4 FSSQC8X21/4 $9.458x2-1/2 FSSQC8X21/2 $12.508x3 FSSQC8X3 $16.5910x2-1/2 FSSQC10X21/2 $18.4810x3 FSSQC10X3 $19.1110x3-1/2 FSSQC10X31/2 $21.4210x4 FSSQC10X4 $28.98

316 Stainless Single Auger Point Deck ScrewsSquare drive, bugle head. 316 Stainless Steel. Excellent corrosion resistance for outdoor or marine applications.

Size Length Part # Price (100)6 1-1/4” FSS6QC6X11/4 $28.356 1-5/8” FSS6QC6X15/8 $14.918 1-5/8” FSS6QC8X15/8 $18.278 2” FSS6QC8X2 $45.158 2-1/4” FSS6QC8X21/4 $23.108 2-1/2” FSS6QC8X21/2 $27.938 3” FSS6QC8X3 $66.3610 1-5/8” FSS6QC10X15/8 $45.7810 2” FSS6QC10X2 $26.1010 2-1/2” FSS6QC10X21/2 $35.3410 3” FSS6QC10X3 $76.6510 3-1/2” FSS6QC10X31/2 $52.50

Size Length Part # Price (100) 6 1/2" FSSWSFH6X1/2 $6.62

3/4" FSSWSFH6X3/4 $7.351" FSSWSFH6X1 $10.921-1/4" FSSWSFH6X11/4 $13.131-1/2" FSSWSFH6X11/2 $16.70

8 1/2" FSSWSFH8X1/2 $11.343/4" FSSWSFH8X3/4 $11.551" FSSWSFH8X1 $12.811-1/4" FSSWSFH8X11/4 $14.181-1/2" FSSWSFH8X11/2 $16.911-3/4" FSSWSFH8X13/4 $25.202" FSSWSFH8X2 $20.48

10 3/4" FSSWSFH10X3/4 $18.901" FSSWSFH10X1 $18.061-1/4" FSSWSFH10X11/4 $22.051-1/2" FSSWSFH10X11/2 $24.151-3/4" FSSWSFH10X13/4 $36.862" FSSWSFH10X2 $41.062-1/2" FSSWSFH10X21/2 $40.323" FSSWSFH10X3 $39.27

12 1-1/4" FSSWSFH12X11/4 $30.451-3/4" FSSWSFH12X13/4 $33.602" FSSWSFH12X2 $36.752-1/2" FSSWSFH12X21/2 $36.753" FSSWSFH12X3 $42.74

14 1" FSSWSFH14X1 $75.081-1/2" FSSWSFH14X11/2 $38.852" FSSWSFH14X2 $50.402-1/2" FSSWSFH14X21/2 $50.403" FSSWSFH14X3 $52.924" FSSWSFH14X4 $109.40

Stainless SteelWood Screws - Slotted18-8 stainless steelFlat HeadThese marine grade wood screws provide excellent corrosion resistance and are the work horse for modern boatbuilding or exterior woodworking applications.

316 Stainless for the Ultimate Corrosion Resistance!

JD Tech Team:

Peter - Specializing in wooden boats/repairs, paints, varnish, screws & glues.

{ 40 years in industry }


59 | Jamestowndistributors.com | 800.423.0030 | Many more Fastener styles & sizes Available Online

We’re your source for hard to find Marine Fasteners!F

as

te

ne

rs

Size Length Part # Price (100)1/4~20 1-1/2" FSSCB14X11/2 $22.05

2" FSSCB14X2 $32.552-1/4" FSSCB14X21/4 $33.602-1/2" FSSCB14X21/2 $34.653" FSSCB14X3 $36.233-1/2" FSSCB14X31/2 $47.934" FSSCB14X4 $45.894-1/2" FSSCB14X41/2 $48.415" FSSCB14X5 $52.506" FSSCB14X6 $56.918" FSSCB14X8 $727.65

5/16~18 1-1/2" FSSCB516X11/2 $33.712" FSSCB516X2 $45.152-1/2" FSSCB516X21/2 $57.543" FSSCB516X3 $58.803-1/2" FSSCB516X31/2 $57.544" FSSCB516X4 $85.585" FSSCB516X5 $118.976" FSSCB516X6 $107.52

3/8~16 1-1/2" FSSCB38X11/2 $47.462" FSSCB38X2 $48.302-1/2" FSSCB38X21/2 $77.703" FSSCB38X3 $94.503-1/2" FSSCB38X31/2 $95.554" FSSCB38X4 $116.554-1/2" FSSCB38X41/2 $93.455" FSSCB38X5 $150.155-1/2" FSSCB38X51/2 $131.046" FSSCB38X6 $183.757" FSSCB38X7 $323.40

Carriage Bolts18-8 stainless steelPrices shown are for a box of 100. Single-piece pricing is available -- call for pricing.

Size Part # Price (100)4~40 FSSLN440 $3.006~32 FSSLN632 $3.688~32 FSSLN832 $4.9410~24 FSSLN102 $5.1212~24 FSSLN122 $9.031/4~20 FSSLN14 $8.915/16~18 FSSLN516 $9.433/8~16 FSSLN38 $19.747/16~14 FSSLN716 $28.041/2~13 FSSLN12 $52.715/8~11 FSSLN58 $107.653/4~10 FSSLN34 $171.477/8~9 FSSLN78 $733.66

Lock Nuts 18-8 stainless steel (Nylon)

Hex Nuts 18-8 stainless steelSize Part # Price (100)4~40 FSSHN440 $2.636~32 FSSHN632 $2.318~32 FSSHN832 $2.5210~24 FSSHN102 $4.0312~24 FSSHN122 $6.91

Size Part # Price (100)6~32 FSSAN632 $13.238~32 FSSAN832 $15.4410~24 FSSAN102 $22.8710~32 FSSAN103 $20.9012~24 FSSAN122 $78.541/4~20 FSSAN14 $15.125/16~18 FSSAN516 $25.203/8~16 FSSAN38 $33.187/16~14 FSSAN716 $216.301/2~13 FSSAN12 $126.065/8~11 FSSAN58 $762.303/4~10 FSSAN34 $681.45

Cap Nuts (Acorn) 18-8 stainless steel

Fender Washers 18-8 stainless steel

Size OD Part # Price (100)10 11/16 FSSNW10X11/16 $4.0310 1 FSSNW10X1 $6.701/4 3/4 FSSNW14X3/4 $5.881/4 1 FSSNW14X1 $10.291/4 1-1/4 FSSNW14X11/4 $14.705/16 1-1/2 FSSNW516X11/2 $21.843/8 1 FSSNW38X1 $6.723/8 1-1/2 FSSNW38X11/2 $21.003/8 2 FSSNW38X2 $34.651/2 2 FSSNW1/2X2 $36.121 2-1/2 FSSNW1X21/2 $152.46

Lock Washers 18-8 stainless steel

Size Part # Price (100)10 FSSLW10 $4.4712 FSSLW12 $6.601/4 FSSLW14 $7.255/16 FSSLW516 $8.403/8 FSSLW38 $8.557/16 FSSLW716 $10.291/2 FSSLW1/2 $11.765/8 FSSLW58 $24.99

Flat Washers 18-8 stainless steel

Size OD Part # Price (100)4 0.312 FSSFW4 $5.256 3/8 FSSFW6 $1.858 3/8 FSSFW8 $5.7010 7/16 FSSFW10 $4.0512 9/16 FSSFW12 $7.351/4 5/8 FSSFW14 $2.105/16 3/4 FSSFW516 $11.553/8 7/8 FSSFW38 $4.947/16 FSSFW716 $13.441/2 1-1/4 FSSFW1/2 $15.335/8 1-1/2 FSSFW58 $30.143/4 1-7/8 FSSFW34 $53.557/8 2 FSSFW78 $64.891 2 FSSFW1 $57.751-1/8 2-1/2 FSSFW118 $158.76

59 | Jamestowndistributors.com | 800.423.0030 | Many more Fastener styles & sizes Available Online See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 60

Silicon BronzeWood Screws - Frearson Flat HeadFrearson Drive wood screws appear similar to the Phillips head but the Frearson has a more pointed 75º V shape. Traditional boatbuilders love these Silicon Bronze wood screws because they have cut threads and the full-bodied diameter shank. Unlike rolled thread screws with their reduced shank--these screws have a shank diameter that is the same size as the outside of the threads. This completely fills the clearance hole drilled for the shank thus creating a waterproof seal.

Size-Length-Part # Price (100)6 1/2" FSBWSFP6X1/2 $8.30

3/4" FSBWSFP6X3/4 $16.061" FSBWSFP6X1 $18.061-1/4" FSBWSFP6X11/4 $19.951-1/2" FSBWSFP6X11/2 $30.66

8 1/2" FSBWSFP8X1/2 $9.145/8" FSBWSFP8X5/8 $14.243/4" FSBWSFP8X3/4 $18.487/8" FSBWSFP8X7/8 $18.471" FSBWSFP8X1 $21.761-1/4" FSBWSFP8X11/4 $24.161-1/2" FSBWSFP8X11/2 $30.451-3/4" FSBWSFP8X13/4 $39.162" FSBWSFP8X2 $40.462-1/2" FSBWSFP8X21/2 $41.16

10 3/4" FSBWSFP10X3/4 $22.981" FSBWSFP10X1 $33.601-1/4" FSBWSFP10X11/4 $35.181-1/2" FSBWSFP10X11/2 $44.221-3/4" FSBWSFP10X13/4 $52.582" FSBWSFP10X2 $59.402-1/2" FSBWSFP10X21/2 $76.563" FSBWSFP10X3 $82.32

12 1" FSBWSFP12X1 $35.911-1/4" FSBWSFP12X11/4 $75.021-1/2" FSBWSFP12X11/2 $76.651-3/4" FSBWSFP12X13/4 $58.802" FSBWSFP12X2 $79.202-1/2" FSBWSFP12X21/2 $98.703" FSBWSFP12X3 $88.66

14 1-1/2" FSBWSFP14X11/2 $78.121-3/4" FSBWSFP14X13/4 $80.122" FSBWSFP14X2 $92.402-1/2" FSBWSFP14X21/2 $111.263" FSBWSFP14X3 $176.66

Silicon BronzeWood Screws - Slotted Flat Head Silicon bronze is the traditional choice for marine construction. It is corrosion resistant, helps prevent rot around the screw holes when used under water and is relatively strong. Although stronger than Solid Brass, Silicon Bronze screws are not as strong as Steel & require a carefully sized pilot hole to avoid breakage. We recommend drilling twice (once for the root & once for the shank) as well as using Ackempucky Screw lubricant to avoid breakage. All screws longer than 1” are threaded for 2/3 of the shank.

2-1/2" FSBWSFH14X21/2 $118.803" FSBWSFH14X3 $159.603-1/2" FSBWSFH14X31/2 $143.494" FSBWSFH14X4 $178.08

16 1-1/4" FSBWSFH16X11/4 $72.881-1/2" FSBWSFH16X11/2 $72.452" FSBWSFH16X2 $126.002-1/4" FSBWSFH16X21/4 $125.162-1/2" FSBWSFH16X21/2 $134.403" FSBWSFH16X3 $153.303-1/2" FSBWSFH16X31/2 $186.274" FSBWSFH16X4 $225.75

Size-Length-Part # Price (100)6 1/2" FSBWSFH6X1/2 $10.08

5/8" FSBWSFH6X5/8 $11.723/4" FSBWSFH6X3/4 $12.167/8" FSBWSFH6X7/8 $16.591" FSBWSFH6X1 $17.221-1/4" FSBWSFH6X11/4 $15.231-1/2" FSBWSFH6X11/2 $20.52

8 1/2" FSBWSFH8X1/2 $14.783/4" FSBWSFH8X3/4 $17.147/8" FSBWSFH8X7/8 $22.641" FSBWSFH8X1 $18.151-1/4" FSBWSFH8X11/4 $24.161-1/2" FSBWSFH8X11/2 $39.501-3/4" FSBWSFH8X13/4 $32.572" FSBWSFH8X2 $40.952-1/2" FSBWSFH8X21/2 $41.90

9 1-1/2" FSBWSFH9X11/2 $34.5310 3/4" FSBWSFH10X3/4 $26.46

7/8" FSBWSFH10X7/8 $20.901" FSBWSFH10X1 $32.551-1/4" FSBWSFH10X11/4 $42.901-1/2" FSBWSFH10X11/2 $49.061-3/4" FSBWSFH10X13/4 $62.442" FSBWSFH10X2 $54.182-1/4" FSBWSFH10X21/4 $54.862-1/2" FSBWSFH10X21/2 $72.683" FSBWSFH10X3 $134.40

12 3/4" FSBWSFH12X3/4 $29.401" FSBWSFH12X1 $54.601-1/4" FSBWSFH12X11/4 $58.171-1/2" FSBWSFH12X11/2 $70.401-3/4" FSBWSFH12X13/4 $65.212" FSBWSFH12X2 $96.802-1/4" FSBWSFH12X21/4 $66.892-1/2" FSBWSFH12X21/2 $104.723" FSBWSFH12X3 $117.183-1/2" FSBWSFH12X31/2 $95.55

14 1" FSBWSFH14X1 $67.201-1/4" FSBWSFH14X11/4 $77.621-1/2" FSBWSFH14X11/2 $81.401-3/4" FSBWSFH14X13/4 $96.602" FSBWSFH14X2 $136.402-1/4" FSBWSFH14X21/4 $119.70

Lock Washers Silicon bronzeSize Part # Price (100)8 FSBLW8 $2.9410 FSBLW10 $3.891/4 FSBLW14 $10.285/16 FSBLW516 $16.523/8 FSBLW38 $22.261/2 FSBLW1/2 $48.72

Finish WashersSilicon bronzeSize Part # Price (100)6 FSBCW6 $7.358 FSBCW8 $9.9810 FSBCW10 $10.3114 FSBCW14 $19.64

61 | Jamestowndistributors.com | 800.423.0030 | See our entire selection of Fasteners on our website

Metal Prices are volatile.Visit us

online for up to the minute prices

Fa

st

en

er

s

Flat WashersSilicon bronzeSize Part # Price (100)6 FSBFW6 $6.728 FSBFW8 $6.0710 FSBFW10 $7.8812 FSBFW12 $12.391/4 FSBFW14 $18.815/16 FSBFW516 $40.323/8 FSBFW38 $55.867/16 FSBFW716 $57.961/2 FSBFW1/2 $112.275/8 FSBFW58 $173.253/4 FSBFW34 $346.50

Heavy Hex NutsSilicon bronzeSize Part # Price (100)1/4~20 FSBHNH14 $45.155/16~18 FSBHNH516 $60.903/8~16 FSBHNH38 $107.101/2~13 FSBHNH12 $201.605/8~11 FSBHNH58 $658.353/4~10 FSBHNH34 $831.601~8 FSBHNH1 $4134.99

Hex NutsSilicon bronze (Machine Screw Nuts)Size Part # Price (100)6~32 FSBHN632 $9.668~32 FSBHN832 $12.5710~24 FSBHN102 $14.2810~32 FSBHN103 $10.711/4~20 FSBHN14 $16.395/16~18 FSBHN516 $34.553/8~16 FSBHN38 $33.187/16~14 FSBHN716 $99.751/2~13 FSBHN12 $83.165/8~11 FSBHN58 $247.993/4~10 FSBHN34 $485.10

Carriage BoltsSilicon bronzeCarriage bolts are designed for through-bolting where the square neck is used to keep the bolt from turning as a nut is tightened on the other end.

Domestic with shoulder Size Length Part # Price (ea.) 1/4~20 4-1/2" FSBCB14X41/2 $8.30

5" FSBCB14X5 $8.616" FSBCB14X6 $10.287" FSBCB14X7 $9.988" FSBCB14X8 $9.47

5/16~18 4" FSBCB516X4 $3.044-1/2" FSBCB516X41/2 $9.455" FSBCB516X5 $10.405-1/2" FSBCB516X51/2 $10.826" FSBCB516X6 $12.707" FSBCB516X7 $12.288" FSBCB516X8 $13.749" FSBCB516X9 $14.44

3/8~16 4" FSBCB38X4 $7.395" FSBCB38X5 $10.715-1/2" FSBCB38X51/2 $13.656" FSBCB38X6 $11.767" FSBCB38X7 $12.708" FSBCB38X8 $13.659" FSBCB38X9 $14.4910" FSBCB38X10 $15.86

1/2~13 2-1/2" FSBCB12X21/2 $8.533" FSBCB12X3 $5.883-1/2" FSBCB12X31/2 $5.754" FSBCB12X4 $9.125" FSBCB12X5 $16.296" FSBCB12X6 $19.117" FSBCB12X7 $18.808" FSBCB12X8 $20.9010" FSBCB12X10 $30.1512" FSBCB12X12 $32.0514" FSBCB12X14 $45.97

61 | Jamestowndistributors.com | 800.423.0030 | See our entire selection of Fasteners on our website For Boaters and thier craft | 800.423.0030 | Jamestowndistributors.com | 62

Photo Contest Winner Jim Troyan installing hardware on a newly restored 1960 17’ Chris Craft Sportsman

Size Length Part # Price (100)1/4~20 2" FGLCBE14X2 $9.45

2-1/2" FGLCBE14X21/2 $12.503" FGLCBE14X3 $15.713-1/2" FGLCBE14X31/2 $13.444-1/2" FGLCBE14X41/2 $27.49

5/16~18 2" FGLCBE516X2 $13.972-1/2" FGLCBE516X21/2 $17.673" FGLCBE516X3 $20.563-1/2" FGLCBE516X31/2 $23.684" FGLCBE516X4 $27.205" FGLCBE516X5 $30.246" FGLCBE516X6 $40.5310" FGLCBE516X10 $134.72

3/8~16 2-1/2" FGLCBE38X21/2 $24.683" FGLCBE38X3 $34.133-1/2" FGLCBE38X31/2 $34.654" FGLCBE38X4 $35.184-1/2" FGLCBE38X41/2 $41.815" FGLCBE38X5 $44.006" FGLCBE38X6 $60.067" FGLCBE38X7 $55.658" FGLCBE38X8 $73.579" FGLCBE38X9 $82.1110" FGLCBE38X10 $91.8812" FGLCBE38X12 $101.85

1/2~13 2-1/2" FGLCBE12X21/2 $51.663" FGLCBE12X3 $58.073-1/2" FGLCBE12X31/2 $64.264" FGLCBE12X4 $78.234-1/2" FGLCBE12X41/2 $90.935" FGLCBE12X5 $79.806" FGLCBE12X6 $102.277" FGLCBE12X7 $131.258" FGLCBE12X8 $139.659" FGLCBE12X9 $146.7910" FGLCBE12X10 $162.7512" FGLCBE12X12 $168.4214" FGLCBE12X14 $262.50

Carriage BoltsGalvanized Does not include nuts. Hot dipped galvanized Carriage Bolts. Carriage bolts are designed for throughbolt-ing where the square neck is used to keep the bolt from turning as a nut is tightened on the other end. Will really clean up the appearance of your outdoor projects--deck furniture decks and docks.

Size Dia Part # Price (100)1/2" 3 FGLNW12 $207.905/8" 3 FGLNW58 $168.003/4" 3 FGLNW34 $207.901" 3 FGLNW1 $230.42

Flat Washers Galvanized Price is per pound

Size Count/lb Part # Price/lb1/4" 149 FGLFW14 $3.055/16" 90 FGLFW516 $3.053/8" 67 FGLFW38 $3.051/2" 26 FGLFW1/2 $2.885/8" 13 FGLFW58 $2.943/4" 10 FGLFW34 $2.967/8" 7 FGLFW78 $2.631" 6 FGLFW1 $2.96

Hex Nuts Galvanized

Size Part # Price (100)1/4~20 FGLHN14 $2.425/16~18 FGLHN516 $3.153/8~16 FGLHN38 $4.411/2~13 FGLHN12 $11.765/8~11 FGLHN58 $23.633/4~10 FGLHN34 $37.637/8~9 FGLHN78 $54.391 FGLHN1 $102.38

Dock Washers GalvanizedHeavy duty Galvanized Dock Washers have an oversized Outside Diameter and are extra thick in order to provide more bearing surface for heavily loaded fasteners.

Lock Washers Galvanized

Size Part # Price (100)1/4" FGLLW14 $1.625/16" FGLLW516 $2.543/8" FGLLW38 $4.391/2" FGLLW1/2 $7.355/8" FGLLW58 $14.183/4" FGLLW34 $18.80


Metal Prices are volatile.Visit us online for up to the minute prices

Kelly fastening the keel at Bristol Boat Co. Photo Stephanie Ewens

Shank HeadPenny Gauge Length Dia Dia Count/lb Item #2 D 15 1" 0.072" 3/16" 685 NCC15X13 D 14 1-1/4" 0.083" 3/16" 424 NCC14X11/44 D 12 1-1/2" 0.109" 1/4" 205 NCC12X11/2 5 D 12 1-3/4" 0.109" 1/4" 165 NCC12X13/46 D 11 2" 0.120" 9/32" 133 NCC11X28 D 10 2-1/2" 0.134" 5/16" 86 NCC10X21/210 D 9 3" 0.148" 5/16" 55 NCC9X316 D 8 3-1/2" 0.165" 3/8" 40 NCC8X31/220 D 6 4" 0.203" 7/16" 23 NCC6X4

Copper Common NailsCopper Common Nails are often used with Copper Burrs to create a traditional copper rivet, similar to clench nailing. Copper rivets are often utilized in classic planked wooden boat construction.

Silicon Bronze Threaded Nails Annular RingRecommended for wood/plywood joints where maximum resistance to withdrawal loads is required. Annular ring "barbs" create a "locking" effect. Nails resist pullout stresses. Not recommended where shear, lateral or racking loads are significant, or for end-grain nailing. Thisthread form offers holding power comparable to wood screws with maximum back-out resistance. Corrosion resistant.

Gauge Length Count/lb Item #15 3/4" 813 NSBR15X3/414 3/4" 765 NSBR14X3/4

7/8" 680 NSBR14X7/81" 524 NSBR14X11-1/4" 424 NSBR14X11/41-1/2" 358 NSBR14X11/2

12 3/4" 416 NSBR12X3/41" 302 NSBR12X11-1/4" 245 NSBR12X11/41-1/2" 205 NSBR12X11/21-3/4" 165 NSBR12X13/42" 157 NSBR12X2

10 1-1/4" 174 NSBR10X11/42" 112 NSBR10X22-1/2" 86 NSBR10X21/23" 68 NSBR10X3

8 2-1/2" 58 NSBR8X21/23-1/2" 40 NSBR8X31/2

Copper RovesCopper roves are slightly conical washers. A copper nail is hammered through the joint, a rove is pushed over the end (concave side inward) and the nail is peened over so that a rivet is formed.

Size OD Item # Price (100)#14 5/16" NCRV14 $7.49#13 3/8" NCRV13 $14.01#12 7/16" NCRV12 $17.18

Copper Cut TacksCopper Cut Tacks are a favorite fastener used by Boatbuilders and Woodworkers. They feature a sharp point, tapered body and an angular cut shank to resist pull-out.

Size Count/lb Item # Price/lb 3/8" 2032 NCT3/8 $47.567/16" 1680 NCT7/16 $46.281/2" 1504 NCT1/2 $47.565/8" 848 NCT5/8 $42.463/4" 720 NCT3/4 $38.601" 464 NCT1 $38.60


Copper BurrsSmall flat washers used with copper nails in riveting, similar to clinch nailing.

Nail Hole Count CountGauge ID oz lb Item # Price (oz)#14 0.093" 128 2050 NCB14OZ $4.61#12 0.124" 93 1240 NCB12OZ $3.55#13 0.102" 78 1488 NCB13OZ $4.61#10 0.138" 47 750 NCB10OZ $3.01#9 0.146" 36 580 NCB9OZ $2.49#8 0.166" 29 465 NCB8OZ $2.49

Rose Head Copper NailsTraditional copper cut nails used with matching copper roves. These nails are extremely robust, easy to drive and when the wood fibers become damp and swell, will never work loose.

Size Length Item # Price (100)#14 3/4" NCRS14X3/4 $9.99#14 1" NCRS14X1 $13.02#13 1-1/4" NCRS13X11/4 $22.46#13 1-1/2" NCRS13X11/2 $25.89#12 2" NCRS12X2 $45.03

Gauge Shank Head Loose Fit Tight Fit15 0.072" 3/16”14 0.083" 7/32” 14 N/A12 0.109" 17/64” 12 1310 0.134" 5/16” 10 129 0.148" 5/16” 8 98 0.165" 11/32” 7 8

JD’s Decoder Copper Nail and Burr Specifications

Fa

st

en

er

s

Nail Burr Burr

All sizes $1244 / lb.

All sizes $1740 / lb.

Features:• Powerful 5W output power• Dual/Tri-watch functions• 4-step battery life indicator• Weather channel with weather alert• 2-step power saver• Auto scan function• Instant access to Ch 16 or Ch 9• Optional battery case for using with alkaline cells (alkaline batteries will affect buoyancy of radio)

HX280S Marine Handheld VHF RadioThe Standard Horizon HX280S handheld VHF marine radio is submersible! This 5 Watt handheld VHF can be submersed underwater for up to 30 minutes in a depth of 3 feet and has a battery life of over 13 hours. It is a great VHF radio for any boat and comes with a slim form fitting case design.

HX370S Submersible 5W VHF Marine RadioThe Standard Horizon HX370S submersible 5 watt portable VHF band marine radio includes 12VDC & 110VAC overnight chargers with drop in base, submersible AA Alkaline battery tray and belt clip. The HX370S is built to withstand the harsh marine environment.

STD-HX280S

Only $11999 STD-HX370SAS

Only $26487


FREE Shipping

on our Mobile Site

Use your Smartphone with our Mobile website to get Free Shipping

on your next order over $50! Only valid via Ground Shipping in the

Continental US. Some product exclusions apply. See website for details.

Limited time offer.

Features:• Marine and 40 commercial LMR VHF (dealer programmable) channel capability• 1400mAh Nickel Metal Hydride - 18 hour battery• Unique SOS distress beacon• Oversized LCD with channel names• Speaker mic & voice scrambler capable

Raymarine Ray49 VHF RadioThe Ray49 VHF Radio is Raymarine’s smallest fully waterproof VHF radio. It comes complete with features boaters look for in their VHF radios like programmable scan, tri-watch and NOAA weather alert.

RAY-E43034

Only $24999

Standard Horizon GX1150 Eclipse VHF RadioA perfect choice for serious boaters, the Eclipse DSC+ is an affordable, ultra compact VHF marine radio designed with a sturdy die-cast chassis with all of the features you would expect in a high quality Class D DSC radio.

STD-GX1150

Only $12999

Scan this QR code with your phone

El

ec

tr

on

ics

STG-10-R10

Only $29999

Kannad SafeLink R10The SafeLink R10 SRS is a world-first personal AIS (Automatic Identification System) device, designed to be worn by individuals and activated to assist with recovery in a man overboard situation. Worn on a lifejacket and activated by simply sliding off the safety tab and lifting an arming cap to deploy the antenna, this unique product sends structured alert messages, GPS position and a special identity code directly to AIS receivers within (approx.) a four mile radius.

JD Tech Team:

Jack Specializing in electronics, electrical and marine systems.{ 30 years in industry }



FREE Shipping

on our Mobile Site

ACR Satellite 3 406 MHz EPIRBThe ACR Satellite3 406 is one of the worlds smallest EPIRBs. It utilizes an improved electronics package to maintain faster and more stable 406 MHz transmissions to low-earth orbiting LEOSAR satellites in an emergency.When activated, a digitally-coded distress message is broadcast to the Cospas-Sarsat Search and Rescue satellites. An integrated 121.5 MHz homing signal and high-visibility LED strobe light assist local SAR efforts when close.

ACR-3959

Only $29

ACR ResQLink 406 GPS PLBThe ACR ResQLink 406 GPS PLB is the world’s smallest Personal Locator Beacon at only 3.6 oz and 3.9 inches long. It can access the worldwide rescue service in extreme condi-tions and situations by deploying the antenna and pressing the ON button. The ResQLink 406 PLB is a full-powered, GPS-enabled rescue beacon. The ResQLink+ is the buoyant model. ACR offers an optional 406link.com service that pro-vides confirmation of standard and GPS self-tests in a matter of seconds, so that you always know it is working properly.

Type Item # PriceResQLink ACR-2880 $274.99Buoyant ResQLink+ ACR-2881 $299.99

Type Item # PriceAuto Deploy Cat. 1 ACR-2874 $565.50Manual Deploy Cat. 2 ACR-2875 $544.50

ACR C-Strobe Emergency LightStrap the ACR C-Strobe emergency light to your life jacket, PFD, or boat for safety and visibility. The C-Strobe produces a intense 360 degree strobe visible up to 2 miles away, and will make sure you are seen out on the water. Operates on two AA alkaline or lithium batteries (not included) and lasts up to 8 hrs on continuous use in 30 degree temps. Meets USCG requirements.

Category 1Auto Deploy

Category 2Manual Deploy >

>

PRSRT STDU.S. POSTAGE

PAIDJAmESTOwn

DISTRIbUTORS

Jamestown Distributors17 Peckham Drive Bristol, RI 02809

CUSTOmER #

Cover: The Herreshoff S Class Red Jacket prior to a major renovation by the narragansett Shipwrights. Stephanie Ewens

JamestownDistributors.com 800.423.0030

At Jamestown we focus on having the right products, people and technology to ensure our customers get the most out of their relationship with their boats.

We know that you do not have the time or the money to waste on products that do not work. That is why we have spent the past 2 years working diligently to test, evaluate and develop the TotalBoat line. Our goal is to offer products that produce great results, are easy to use & provide an incredible value.

Introducing

from Jamestown Distributors

Testing panels for U.V.

Resistance in the JD lab

Or current Resident/Occupant

Documents

Sale - Jamestown Distributors · Type Size Regular SALE Cold or Warm 2 pt $39.99 $34.99 Cold or Warm 2 qt $65.99 $58.99 Cold or ... 8 oz WSY-650-8 $20.79 32 oz WSY-650-32 $60.04 BoatLife