Sagrada Familia, Spain : Assembly Instructions · Sagrada Familia, Spain : Assembly Instructions A. Tower of the Virgin Mary/Tower of Jesus Christ/Crossing

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. Ichiyama

http://www.canon.com/c-park/

*Hint: Trace along the folds with a ruler and an exhausted pen (no ink) to get a sharper, easier fold.

View of completed model

Assembly Instructions: Twenty-four A4 sheets (No. 1 to No. 24)* Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.

Before starting assembly:Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section is which even after cutting out the sections.)

Assembly Instructions

Glue spot(Red dot)Glue parts with the same number together.

Glue spot(Green dot)Glue within the same part.

Glue spot(Blue dot)Glue to the rear of the other part.

Glue

The glue spot(colored dot)shows where to apply the glue.

Tools and materials

Assembly tip

Caution

Scissors, set square, glue(We recommend stick glue), pencil, used ballpoint pen, toothpicks, tweezers, (useful for handling small parts)

Before gluing, crease the paper along mountain fold and valley fold lines and make sure rounded sections are nice and stiff.

Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children.

Mountain fold(dotted line)Make a mountain fold.

Valley fold(dashed and dotted line)Make a valley fold.

Scissors line(solid line)Cut along the line.

Cut in line(solid line)Cut along the line.

Indicates where sections should be glued together.

Indicates sections that should be glued first, then cut out.

* This model was designed for Papercraft and may differ from the original in some respects.

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaA. Tower of the Virgin Mary/Tower of Jesus Christ/Crossing


Fold along the lines.Position and glue these two sides

so that they are parallel when viewed from above.

Fold along the lines.

Glue in place on the glue tabs so that the pieces are correctly oriented.


Glue the rear sides together.








View from above


Glue in place on the glue tabs so that the pieces are correctly oriented.


Glue the jagged sides together.

* Since A35d, A35e, A35f, and A35g have no tabs to glue to, glue while visually inspecting to confirm they are correctly positioned.







Position these three parts so that they line up.


Glue in place so that the cross is at right angles to the building when viewed from above and the birds are positioned diagonally to it at 45° angles.

Position so that this pattern is located at the front of the model.

Make four identical components.

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaB. Chapel of the Assumption/sacristy/corridor (north)

Glue the jagged sides together.

Make two identical components.




Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaB. Chapel of the Assumption/sacristy/corridor (north)


Position so that this part is located at the front of the model.

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaC. Central nave/baptistery/corridor (south)


Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaC. Central nave/baptistery/corridor (south)



Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaD. Glory Façade

Glue the pieces together in the direction shown in the illustration.

Glue the pieces together in the direction shown in the illustration.



Glue the pieces together in this position.

Front Back


Assemble as shown in the illustration.

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaE. Nativity Façade

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaE. Nativity Façade


Glue at these positions.



Front Back

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaF. Passion Façade

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaF. Passion Façade

Front Back




Glue at these positions.

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaG. Stand

D. Glory Façade

C. Central nave/baptistery/corridor (south)

B. Chapel of the Assumption/sacristy/corridor (north))

A. Tower of the Virgin Mary/Tower of Jesus Christ/Crossing

Sagrada Familia, Spain : Assembly Instructions © Canon Inc. © T. IchiyamaG. Stand

F. Passion Façade E. Nativity Façade

Documents

Sagrada Familia, Spain : Assembly Instructions · Sagrada Familia, Spain : Assembly Instructions A. Tower of the Virgin Mary/Tower of Jesus Christ/Crossing