SABROE packaged ammonia heat pump · 2020. 9. 3. · Sabroe packaged ammonia heat pumps: Advantages • Compact design • Small ammonia charge • Evaporator and condenser in suitable

SABROE packaged ammonia heat pump

Ammonia - the natural choiceAmmonia has a number of characteristics which make it the ideal refrigerant for future refrigeration purposes:

• Ammonia is the only refrigerant with no negative impact on the environment

• No ozone depleting potential (ODP)

• No global warming potential (GWP)

• A well-known and acknowledged refrigerant which has been used safely in refrigeration for more than 100 years

• Ammonia has the best thermodynamic efficiency

• A natural refrigerant which easily breaks down into nitrogen

• If refrigerant leaks should occur they will be easy to detect, as the distinct smell of ammonia serves as a natural built-in alarm

• It is inexpensive and significantly cheaper than other refrigerants

• Known technology and plant design• Better energy efficiency (COP)• Better heat transfer coefficient• Available and low-priced all over the

world• Non-mixable with oil• Less sensitive to humidity in the plant• Smaller compressor - same capacity• Smaller heat exchangers - same

capacity• Smaller circulated quantity

Why choose ammonia?What are the advantages?

SABROE Ammonia heat pump compressorThe natural choice

The natural choiceSabroe ammonia 40 bar heat pump compressors

Types HPO and HPC

Features:

• Ammonia is an ozone-friendly refrigerant• Heat pump systems reduce the CO2 emission• The series covers the entire water temperature range

up to 70°C.• Compared with CFC, HCFC and HFC systems you will

gain the following advantages:- higher efficiency (COP)- reduced compressor size- smaller evaporators- smaller condensers- smaller pipe and valve dimensions

• Capacity range: 100-1500 kW (one compressor)• Multiple applications

HPC104-106-108S

HPO 24-26-28

Sabroe packaged ammonia heat pumps: Advantages• Compact design• Small ammonia charge• Evaporator and condenser in suitable materials • Efficient closed oil and oil recovery system • High COP and energy optimal solution even at part load• First charge of PAO5(P100) full synthetic oil• Unisab II - a complete control and monitoring system with

external communication facilities• Flooded system with ammonia gives an optimum thermal

solution and secures an optimum operating economy• Tested with ammonia before dispatch

EOL - End Of Line Test centre

All units are tested with ammonia

A capacity test is available as an option

Specified performance is confirmedTrouble-free on-site start-up and operationShorter and safer start-up and commissioning periods

Sabroe packaged ammonia heat pump: Application areas

Dairies Airports

Process IndustriesPoultry industries

Ice rinks

SlaughterhousesBreweries

District heating

ApplicationsSabroe ammonia heat pump compressors are perfectly suited for a large number of applications, such as:

• Heat reclaim for hot/warm water production in ammonia refrigeration plants within the food industry (abattoirs, dairies, ice cream factories, fish processing, freeze drying, breweries, slaughter houses etc.)

• Condenser heat reclaim from refrigeration systems

• Upgrading of industrial waste heat for use in industrial processes, district heating, individual buildings, etc.

• Heat pump systems based on natural heat sources such as sea water, air and geothermal energy

• Special applications such as wood seasoning, fish drying, exhaust gas cooling in power plants, etc.

• Heating in ice rinks or other sports arenas.

• Hot water for baths and swimming pools.

One-stage heat pump unit:Example: Brewery/district heating

Performance:Heating capacity 2131 kW Evaporating temperature +30ºCSink temperature in/out 60/70ºC Condensing temperature 73.5 ºCFlow 187 m3/h COP 5.6Shaft power 381 kW

65ºC

55ºC

Two-stage heat pump unit:Combined chiller - heat pump unit

Performance:Cooling capacity 210 kW Sink temp. in/out 55/65ºCWater temp. in/out 15/8ºC Flow 25.5 m3/hChilled water flow 26.1 m3/h Shaft power LP compressor 29 kWHeating capacity 290 kW Shaft power HP compressor 53 kW

Sabroe packaged ammonia heat pump:Cascade or water / one- or two-stage

One-stage HPO26 Twin

Two stage HPC108/SMC116 Twin

One-stage HPO28 Twin

Sabroe packaged two-stage ammonia heat pump unit

Technical informationProduct-type : Heat pumpCompressor type : Reciprocating compressors Electrical options:Heat exchangers : Plate heat exchangers / Terminal box

shell & tube Control panel Refrigerant : R717, flooded Starter panel Capacity-range : 200 – 4000 kW (Low/high voltage, 50/60 Hz) Temperature range : 72oC water temperature Variable speed control

on condenser Softstarter Secondary media : Water Approval : PED, others on requestDesign-pressure : 40 Bar A


Sabroe packaged two-stage ammonia heat pump unit

Technical information

Duty (Condenser) : 4000 kW / 72 OC

Media : Water

Number ofcompressors : 4

Power : 2x 250 kW / 2x 400 kWVoltage : 400 V


Sabroe packaged ammonia heat pump: Application areas

NSPAC HPC108STraditional design of heat pump unit

Safe use of ammonia plants

SABROE & YORK will support the use of natural refrigerants - invest and develop products for the purpose only!

SABROE & YORK will support the use of R717 for many years to come - and is therefore reluctant to see this unique refrigerant fall into discredit due to lack of knowledge.

Ammonia - the natural choiceWhy choose ammonia?�What are the advantages?SABROE �Ammonia heat pump compressor�The natural choiceThe natural choice�Sabroe ammonia 40 bar heat pump compressorsEOL - End Of Line Test centre ��ApplicationsOne-stage heat pump unit:�Example: Brewery/district heatingTwo-stage heat pump unit:�Combined chiller - heat pump unitNSPAC HPC108S�Traditional design of heat pump unit�Safe use of ammonia plants�

Documents

SABROE packaged ammonia heat pump · 2020. 9. 3. · Sabroe packaged ammonia heat pumps: Advantages • Compact design • Small ammonia charge • Evaporator and condenser in suitable