Embed Size (px)
Citation preview
BITUMEN 30/40BITUMEN 40/50BITUMEN, 80/100BITUMEN 85/100BITUMEN 120/150BITUMEN 180/200BITUMEN 200/300BITUMEN B200POLYMER MODIFIED BITUMEN (PMB)
SABIT ROAD BITUMEN
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 30-40
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (CO C), °C2 232 ASTM D92
30Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
40
Solubility Trichloroethylene, %4 99 ASTM D2024
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with6 ASTM D 946 &AASHTO M20
55+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 30-40 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 30-40 has a high �ash point and has a high adhesion property to aggregates, compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 30-40 to avoid overheating.
Packing & StorageSABIT BITUMEN 30-40 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20)
61
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 40 - 50
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (CO C), °C2 232 ASTM D92
40Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
50
Solubility Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with6 ASTM D 946 &AASHTO M20
55+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 40-50 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 40-50 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be following in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 40-50 to avoid overheating.
Packing & StorageSABIT BITUMEN 40-50 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20)
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
62
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 40 - 50
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (CO C), °C2 232 ASTM D92
40Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
50
Solubility Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with6 ASTM D 946 &AASHTO M20
55+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 40-50 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 40-50 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be following in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 40-50 to avoid overheating.
Packing & StorageSABIT BITUMEN 40-50 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20)
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 80 - 100
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Softening Point (R&B), °C2 44 ASTM D36
70Penetration at 25°C, 0.01mm1 ASTM D5
MAX
49
100
Solubility in Trichloroethylene, %4 99.5 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7 DIN 1995 PART 1GRADE B 80
50Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
232Flash Point °C6 ASTM D92-
TEST METHODS
IntroductionSABIT BITUMEN 80-100 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 80-100 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 80-100 to avoid overheating.
Packing & StorageSABIT BITUMEN 80-100 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH DIN 1995 PART 1 GRADE B 80)
63
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 85 - 100
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (COC), °C2 232 ASTM D92
85Penetration at 25°C, 0.01mm1 ASTM D5
MAX
49
100
Solubility in Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7 ASTM D 946 AASHTO M20
47+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
75Ductility at 25 °C after thin �lm oven test, cm6 ASTM D13&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 85-100 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 85-100 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 85-100 to avoid overheating.
Packing & StorageSABIT BITUMEN 85-100 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20)
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
64
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 120 - 150
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (COC), °C2 218 ASTM D92
120Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
150
Solubility in Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7 ASTM D 946 AASHTO M20
42+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
100Ductility at 25 °C after thin �lm oven test, cm6 ASTM D13&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 120-150 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 120-150 has a high �ash point and has a high adhesion property to aggregates compatible with all types
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 120-150 to avoid overheating.
Packing & StorageSABIT BITUMEN 120-150 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20)
65
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 180 - 200
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (COC), °C2 176 ASTM D92
180Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
200
Solubility in Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7 ASTM D 946
37+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
100Ductility at 25 °C after thin �lm oven test, cm6 ASTM D13&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 180 -200 isa penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 180-200 has a high �ash point and has a high adhesion property to aggregates compatible with all types.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 180-200 to avoid overheating.
Packing & StorageSABIT BITUMEN 180-200 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946)
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
66
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 180 - 200
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (COC), °C2 176 ASTM D92
180Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
200
Solubility in Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7 ASTM D 946
37+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
100Ductility at 25 °C after thin �lm oven test, cm6 ASTM D13&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 180 -200 isa penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN 180-200 has a high �ash point and has a high adhesion property to aggregates compatible with all types.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 180-200 to avoid overheating.
Packing & StorageSABIT BITUMEN 180-200 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946)
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN 200 - 300
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Flash Point (COC), °C2 176 ASTM D92
200Penetration at 25°C, 0.01mm1 ASTM D5
MAX
-
300
Solubility in Trichloroethylene, %4 99 ASTM D2042
100Ductility at 25°C, cm3 ASTM D113
-
-
Complies with7ASTM D 946 AASHTO M20
37+Retained penetration after thin �lm oven test, %5 ASTM D5&D1754-
100Ductility at 25 °C after thin �lm oven test, cm6 ASTM D13&D1754-
TEST METHODS
IntroductionSABIT BITUMEN 200-300 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SBIT BITUMEN 200-300 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN 200-300 to avoid overheating.
Packing & StorageSABIT BITUMEN 200-300 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT, COMPLIES WITH ASTM D 946, AASHTO M 20)
67
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 [email protected] | [email protected] www.saudibitumen.com
SABIT BITUMEN B200
Ref F05-21 Issue BIT JANUARY 2020
TECHNICAL DATA
PROPERTIES MINNO
Ductility at 25°C, cm2 33 ASTM D36
170Penetration at 25°C, 0.01mm1 ASTM D5
MAX
42
230
Complies with
99.5Solubility in Trichloroethylene, %3 ASTM D2042-
BS 3690 PART 1GRADE 200 PEN
5
TEST METHODS
IntroductionSABIT BITUMEN B200 is a penetration grade Asphalt cement for use in the construction and maintenance of �exible pavements, SABIT BITUMEN B200 has a high �ash point and has a high adhesion property to aggregates compatible with all types of aggregate.
Instruction for applicationUsed in a hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt institute publication should be followed in mixing.
CoverageDepends on the mix design.
Health & safetyWorkers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.
PrecautionCare should be taken when heating SABIT BITUMEN B200 to avoid overheating.
Packing & StorageSABIT BITUMEN B200 can be supplied in bulk and drums. Store in suitable tanks supplied with heating system. It should never be stored at more than 150 °C.
Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.
(PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH BS 3690 PART 1 GRADE 200 PEN)
SABIT PMB PAVEFLEX 140SABIT PMB POLYBILT 101SABIT PMB ELVALOYSABIT PMB CRUMB RUBBERSABIT PMB
SABIT POLYMER MODIFIED BITUMEN
68
