Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1" (25 mm)MAX. DECK THICKNESS
FOR SIDE SPRAY
5-1/2" (132mm)NOMINAL
OPTIONALESCUTCHEON
10-1/4" x 2-3/8" WIDE(261mm x 60mm)
Max DeckThickness
2-9/16”(65mm)
5-1/32"(127mm)
2-1/4"(57mm)
2"(51mm)
9-3/4"(248mm)
6-7/8"(175mm)
7-7/16"(189mm)
handle openposition
1/2" IPS
3/8"
24"(609mm)
The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)
S P E C I F I C A T I O N S H E E T
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com
One Handle Kitchen
Models: 42511 series • 42512 series
42513 series with side spray42514 series with side spray
CFG- 42513 Rev. 11/14
CRITICAL DIMENSIONS(DO NOT SCALE)
DESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish
side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching
finish side spray • Six (6) individual boxes per master carton
OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators
FLOW• Spout flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi
CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement
STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1,
and all applicable requirements referenced therein,including NSF61/9
• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing
workmanship• Refer to the installation instructions enclosed with each CFG product or call
1-888-450-4910 for complete warranty information
NOTE: • CA42513 & CA42514 are designed to install through 2 or
4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or
3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center
There is more than 1 version of this model.Page down to identify the version you have.
S P E C I F I C A T I O N S H E E T
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com
Models: CA42511 series • CA42512 series
CA42513 series with side sprayCA42514 series with side spray
One Handle KitchenDESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish
side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching
finish side spray • Six (6) individual boxes per master carton
OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators
FLOW• Spout flow is limited to 2.0 gpm max (7.6 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi
CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement
STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, and all applicable
requirements referenced therein, including NSF61/9• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing
workmanship• Refer to the installation instructions enclosed with each CFG product or call
1-888-450-4910 for complete warranty information
NOTE: • CA42513 & CA42514 are designed to install through 2 or
4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or
3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center
1" (25 mm)MAX. DECK THICKNESS
FOR SIDE SPRAY
5-1/2" (132mm)NOMINAL
OPTIONALESCUTCHEON
10-1/4" x 2-3/8" WIDE(261mm x 60mm)
Max DeckThickness
2-9/16”(65mm)
5-1/32"(127mm)
2-1/4"(57mm)
2"(51mm)
9-3/4"(248mm)
6-7/8"(175mm)
7-7/16"(189mm)
handle openposition
1/2" IPS
3/8"
24"(609mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
CFG- 42513 Rev. 12/13
The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)
1" (25 mm)MAX. DECK THICKNESS
FOR SIDE SPRAY
5-1/2" (132mm)NOMINAL
OPTIONALESCUTCHEON
10-1/4" x 2-3/8" WIDE(261mm x 60mm)
Max DeckThickness
2-9/16”(65mm)
5-1/32"(127mm)
2-1/4"(57mm)
2"(51mm)
9-3/4"(248mm)
6-7/8"(175mm)
7-7/16"(189mm)
handle openposition
1/2" IPS
3/8"
24"(609mm)
The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)
S P E C I F I C A T I O N S H E E T
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com
One Handle Kitchen
Models: 42511 series • 42512 series
42513 series with side spray42514 series with side spray
CFG- 42513 Rev. 11/14
CRITICAL DIMENSIONS(DO NOT SCALE)
DESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish
side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching
finish side spray • Six (6) individual boxes per master carton
OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators
FLOW• Spout flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi• Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi
CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement
STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1,
and all applicable requirements referenced therein,including NSF61/9
• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing
workmanship• Refer to the installation instructions enclosed with each CFG product or call
1-888-450-4910 for complete warranty information
NOTE: • CA42513 & CA42514 are designed to install through 2 or
4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or
3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center
S P E C I F I C A T I O N S H E E T
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com
Models: CA42511 series • CA42512 series
CA42513 series with side sprayCA42514 series with side spray
One Handle KitchenDESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish
side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching
finish side spray • Six (6) individual boxes per master carton
OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators
FLOW• Spout flow is limited to 2.0 gpm max (7.6 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi
CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement
STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, and all applicable
requirements referenced therein, including NSF61/9• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing
workmanship• Refer to the installation instructions enclosed with each CFG product or call
1-888-450-4910 for complete warranty information
NOTE: • CA42513 & CA42514 are designed to install through 2 or
4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or
3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center
1" (25 mm)MAX. DECK THICKNESS
FOR SIDE SPRAY
5-1/2" (132mm)NOMINAL
OPTIONALESCUTCHEON
10-1/4" x 2-3/8" WIDE(261mm x 60mm)
Max DeckThickness
2-9/16”(65mm)
5-1/32"(127mm)
2-1/4"(57mm)
2"(51mm)
9-3/4"(248mm)
6-7/8"(175mm)
7-7/16"(189mm)
handle openposition
1/2" IPS
3/8"
24"(609mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
CFG- 42513 Rev. 12/11
The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)