Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Description
Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 1 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
UP & DOWNSUSPENSIONRECESSED SURFACE
Lamps
Multi Spot: 10W, 4x210lm, 2700K, CRI 80 10W, 4x210m, 3000K, CRI 80
Mini Glo-ball: 7W, 800lm, 2700K, CRI 80 7W, 880lm, 3000K, CRI 80
Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 80 3.5W, 440lm, 3000K, CRI 80
Find Me Suspension: 8W, 560lm, 2700K, CRI 90 8W, 600lm, 3000K, CRI 90
Spot Module: 8W, 550lm, 2700K, CRI 90 8W, 600lm, 3000K, CRI 90
Light Strip, 11.8’’: 7.5W, 435lm, 2700K, CRI 90 7.5W, 460lm, 3000K, CRI 90
Light Strip 23.6’’: 15W, 870lm, 2700K, CRI 90 15W, 920lm, 3000K, CRI 90
Light Strip 35.4’’: 22.5W, 1305lm, 2700K, CRI 90 22.5W, 1380lm, 3000K, CRI 90
Light Strip 47.2’’: 30W, 1740lm, 2700K, CRI 90 30W, 1840lm, 3000K, CRI 90
Spot 120:12.5W, 985lm, 2700K, CRI90 12.5W, 1060lm, 3000K, CRI90
Light Shadow:10.8W, 4x270lm, 2700K, CRI90 10.8W, 4x285lm, 3000K, CRI90
Photometrics
For current IES files please visit architectural.flosusa.com
Construction
Extruded aluminum housing with integral DALI controllable track system.
Flanges for 5/8”. Also 1/2” flanges available ask Flos for part numbers.
Electrical
24V electrical systemlimited to a maximum load of 4A and 100W per driver.
Spot and linear luminaires available with individually addressable DALI circuitry,0-10V Dimming (from 10% up to 100%) or built-in dimmer on each fixture head.
0-10V Fixtures come from the factory set up at the lowest level 10% they always required a 0-10V signal to achieve the maximum output.
EC to supply site cabling from driver to track location and site UL listed enclosure.
Recessed Profile
Trimless extruded aluminum profile to be recessed in sheet rock ceilings and walls(1/2” or 5/8” thick).
Linear profiles available as feed profiles to connect to a driver and intermediate profiles to fill in remaining lengths.
Each feed profile comes with two end caps.
Available lengths: 39.4”, 59”, and 78.7” and 98.4”
All linear profiles are field cuttable.
Corners available for continuous runs.
Track can be powered through corners.
Corners are not field cuttable.
Notes
Consult factory for other ceiling types including accoustic tile ceilings and wood.
Listings: cULus Listed, IP20 dry location only, Class 2, Meets California standards for commercial interiors.
Warranty
2 years from date of sale.
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Luminaries
Light Strip Module HE
Find Me Suspension
Spot 120Spot Module Multi Spot
Mini Glo-Ball Mini Glo-Ball Suspension
Light Shadow
How to Specify
Part Number Dimming Protocolor
Variant
Finish
0 3 7 0 0 0 1 94 0
Page 2 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
2.04‘‘
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Profiles
The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.
Both profile types can be cut to different lengths in field.
3.4
‘‘1.4‘‘
4.9‘‘
5/8’‘
L
Length Part Number Feed Profile
06.1638
06.1639
06.1640
06.1641
39.4’’ (1m)
59’’ (1.5m)
78.7’’ (2m)
98.4’’ (2.5m)
06.1643
06.1644
06.1645
06.1646
Part NumberIntermediate Profile
VariantFinish
14 = Black
How to Specify ex. 06.1638.14.90
.90 = 5/8’’ Ceiling thickness
Page 3 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Optional Profile Mounting Kits
Horizontal 90º Corner
Inside Corner
Outside Corner
Fixed Low-Clearance Mounting Kit ( 2 units)
End Cap kit ( 2 units)Includes the End Feed connector
08.8866.14
08.8867.14ULAdjustable Ceiling Kits (1 unit)
For easier installation without blocking rough-in.
Profile Quantities Ceiling kit
2
3
1000 mm/ 1500 mm [39.37’’ / 59.06’’]
2000 mm/ 2500 mm [78.74’ / 98.42’’’]
08.8865.14A90
Corners
5.9‘‘
5.9‘‘
3.15‘‘
3.15‘‘
5.9‘‘
5.9‘‘
Dimension
Dimension
Dimension
Part Number 90º Corner
Part Number Inside Corner
Part Number Outside Corner
5.9’’ x 5.9’’
3.15” x 3.15”
5.9’’ x 5.9’’
06.1648
06.1650
06.1651
.90 = 5/8’’ Ceilingthikness
.90 = 5/8’’ Ceilingthikness
.90 = 5/8’’ Ceilingthikness
Finish Variant
Variant
Variant
Finish
Finish
14 = Black
14 = Black
14 = Black
How to Specify ex. 06.1648.14.90
How to Specify ex. 06.1650.14.90
How to Specify ex. 06.1651.14.90
Description Part Number DrawingImage QTY
Page 4 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Required Drivers
QTY Image
LEDSB60W24V-NDM-D01
LEDSB60W24V-NDM-U01
LED power supply source for remote installation,24V/60W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/60W, 120-277V, ERP, UL Listed
LEDSB96W24V-NDM-D01
LEDSB96W24V-NDM-U01
LEDSB30W24V-NDM-D01
LEDSB40W24V-NDM-U01
LED power supply source for remote installation,24V/96W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/96W, 120-277V, ERP, UL Listed
LED power supply source for remote installation,24V/30W, 120-277V, Magnitude, UL Listed
LED power supply source for remote installation,24V/40W, 120-277V, ERP, UL Listed
Item Number Description Drawing
12.1”
6.8”
7.4”1.4”
1.45”
1.37”7.12”
2.36”
11.4”
11.7”
3,3”
75.18 ”
59.82 ”
24.9”
102.6”
205.2”
Dimming controllers
Dimming Control Unit Box 24V 0-10VRequired for a 0-10V Dimming installation. 1 DCU can control up to 25 fixtures
08.0613.14A
3,3” 0.66”
2.1
4”
Image Part Number Description DrawingQTY
Page 5 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Light Strip Module HE
CCT CRI
90
90
90
90
3000
3000
3000
3000
440460
880920
13201380
17601840
7.5W 105º
15W 105º
22.5W 105º
14 = Black
30W 105º
03.7001
03.7003
03.7005
03.7007
11.8’’ (300mm)
23.6’’ (600mm)
35.4’’ (900mm)
47.2’’ (1200mm)
Delivered LumensInitial Lumens
Watts BeamSpread
Part NumberLight Strip Length Finish Dimming Protocol
Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V from 10-100%. Clear end caps included for continuous look when installing end-to-end.
2.8
‘‘1.
3‘‘
SEE TABLE
.90 = Dimmable on board
.DD = DALI
.9V = 0-10V
How to Specify ex. 03.7001.14.90
Page 6 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
CCT CRI
90
90
90
90
2700
2700
2700
2700
425435
833870
12491305
16651740
7.5W 105º
15W 105º
22.5W 105º
14 = Black
30W 105º
03.7000
03.7002
03.7004
03.7006
11.8’’ (300mm)
23.6’’ (600mm)
35.4’’ (900mm)
47.2’’ (1200mm)
Delivered LumensInitial Lumens
Watts BeamSpread
Part NumberLight Strip Length Finish Dimming Protocol
.90 = Dimmable on board
.DD = DALI
.9V = 0-10V
How to Specify ex. 03.7000.14.90
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Spot Module
6.7‘‘
1.97‘
‘
ø 1.34‘‘
Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V (from 10-100%). Standard beam spread is 14°. Additional interchangeable lenses available in23° and 33°, and 10° x 40° elliptical beam spread.
90º
360º
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
08.8427.14
Flood Lens Accessory 23°
Wide Flood Lens Accessory 33°
Elliptical Lens Accessory
Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing)
Initial
Lumens
CRI CCT * Delivered
Lumens
418
404
600903000
550902700
8W
8W
14º
14º
03.6302A90 = Dimmable on board
ADD = DALI
A9V = 0-10V03.6303
Watts Beam
Spread
Part Number Finish Dimming Protocol
5.16‘‘
14 = Black
Part Number DescriptionImage
How to Specify ex. 03.6302.14A90
Page 7 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
* Consult with factory other CCT
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Multi Spot 4
4 accent Spot LED module can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture (from 20-100%), DALI and 0-10V (from 10-100%). Standard beam spread is 14° additional interchangeable lenses available in20° and 30°, and elliptical beam spread
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
Flood Lens Accessory 20°
Wide Flood Lens Accessory 30°
Elliptical Lens Accessory
Initial
Lumens
CRI CCT * Delivered
Lumens
674
630
4 X 210903000
4 X 210902700
10W
10W
11º
11º
03.6306
03.6305
Watts Beam
Spread
Part Number Finish Dimming Protocol
14 = Black
.90 = Dimmable on board .DD =
DALI
.9V = 0-10V
Part Number DescriptionImage
How to Specify ex. 03.6306.14.90
2.7‘‘
1.3‘‘
1.17‘‘
6.2‘‘
Page 8 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
* Consult with factory other CCT
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Spot 120
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture (from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 25º and 33º. Honeycomb and cross baffle included.
0.8
7‘‘
1.57‘‘
7.87‘‘
ø 1.8‘‘
5.1‘‘
Page 9 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
CCT * CRI
90
90
90
90
2700
2700
3000
3000
706985
430985
7311060
4441060
12.5W
14W
12.5W
14W
25º
33º
03.6285
03.6284
03.6286
03.6287
Delivered
Lumens
Initial
Lumens
Watts Beam
Spread
Part Number Finish Part Number
0-10V Dimming
14 = Black
40 = White
.90 = Dimmable on board (12.5W)
.DD = DALI (14W)
.9V = 0-10V (12.5W)
How to Specify ex. 03.6285.14.90
* Consult with factory other CCT
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Light Shadow
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on boardfixture (from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 10º, 23º, 33º and 46º.
1.34
’’2.
83’
’
5.5’’
How to Specify ex. 03.8949.14A90
Part Number
03.8949
03.9621
03.8953
03.9631
03.8948
03.9620
03.8952
03.9630
03.8950
03.9622
03.8954
03.9632
03.8951
03.9623
03.8955
03.9633
Watts Interior Finish Exterior Finish Beam Angle
10º
23º
CRI
90
90
10.8
10.8
90
90
10.8
10.8
CCT*
2700
2700
3000
3000
Initial Lumens**
4x270 lm
4x270 lm
4x285 lm
4x285 lm
Dimming Protocol
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
White
White
Matt Gold
Matt Gold
Chrome
Chrome
Black
Black
White
White
Matt Gold
Matt Gold
Chrome
Chrome
Black
Black
A90 = Dimmable on board
ADD = DALI
A9V = 0-10V
** Delivered Lumens From 765lm to 859lm varies depending on the reflector finish, beam angle and CCT
Page 10 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
* Consult with factory other CCT
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
03.9626
03.9661
03.9636
03.9665
03.9625
03.9660
03.9635
03.9664
03.9627
03.9662
03.9637
03.9666
03.9628
03.9663
03.9638
03.9667
33º
46º
90
90
10.8
10.8
90
90
10.8
10.8
2700
2700
3000
3000
4x270 lm
4x270 lm
4x285 lm
4x285 lm
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
White
White
Matt Gold
Matt Gold
Chrome
Chrome
Black
Black
White
White
Matt Gold
Matt Gold
Chrome
Chrome
Black
Black
How to Specify ex. 03.9626.14A90
Part Number Watts Interior Finish Exterior Finish Beam AngleCRI CCT Initial Lumens**
** Delivered Lumens From 765lm to 859lm varies depending on the reflector finish, beam angle and CCT
Dimming Protocol
A90 = Dimmable on board
ADD = DALI
A9V = 0-10V
Page 11 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
* Consult with factory other CCT
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Other Light Module
Mini Glo -Ball
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V from 10-100%.
CCT CRI
80
80
3000
2700
880 528
800 488
7W
7W
03.6261
03.6260
Initial Lu-menss
Delivered Lumens Watts Part Number Dimming Protocol
2.8‘‘
3.3‘‘
ø 4.3‘‘
5.11‘‘
Finish
Mini Glo - Ball 14 = Black
How to Specify ex. 03.6260.30B90
B90 = Dimmable on board
.DD = DALI
.9V = 0-10V
Page 10 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Other Light Module
Mini Glo - Ball Suspension
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V from 10-100%.
CCT CRI
80
80
3000
2700
440 271
400 259
3.5W
3.5W
03.6263
03.6262
Initial Lumenss Delivered Lu-menss
Watts Part Number Dimming Protocol
2.8‘‘
118‘‘
3.6‘‘
ø 4.3‘‘
[300
0 m
m]
MA
X.
5.07‘‘
Finish
Mini Glo - Ball Suspension 14 = Black
How to Specify ex. 03.6263.30B90
B90 = Dimmable on board
.DD = DALI
.9V = 0-10V
Page 13 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
Fixture Type
Job Name
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Other Light Module
Find Me Suspension
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V from 10-100%.
Dimming Protocol
2.8‘‘
118‘‘
8.7‘‘
ø 1.3‘‘
[300
0 m
m]
MA
X.
5.11‘‘
CCT * CRI
90
90
3000
2700
600 365
560 344
8W 14º
8W 14º
03.6273
03.6272
Initial Lumens DeliveredLumens
Watts Beam Spread
FinishPart Number
Find Me Suspension 14 = Black
06 = Chrome
30 = White
How to Specify ex. 03.6273.30C90
C90 = Dimmable on board
.DD = DALI
.9V = 0-10V
Page 14 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
* Consult with factory other CCT
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
How to Specify
A. Select and position corners
1. Horizontal - Connect sections on flat surfaces (90º corner)2. Inside - Transition from wall to ceiling (inside corner)3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3.3’, 4.9’, 6.6’ or 8.2’ sections can be specified as feed orintermediate profiles. Profile can be easily cut to site to exactlength and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elementsin section (approximately one every 10 feet). Maximum driverdistance is 15’. Locate drivers nearby. Dimming hardwires intoprofile, bypasses driver.
D. Select Spot heads
Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’.Individual units can be adjusted from 20-100% with a built-indimming knob and DALI and 0-10V from 10-100%
Page 15 of 15
For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 09.24.2019
*90° Corner
*Inner Corner
Feed Unit Profiles
Intermediate Profiles
*Outer Corner
End caps
VDC24V
Gateway