R&S TSMA Release Notes Firmware Version 1.32.01 · PDF file1.32.00.04 Successful ROMES license file ... 1.30.00.03 Unsynchronized launch of QualiPoc and ROMES ... 1.20.03 Instable

PA

D-T

-M: 3574.3

288.0

2/0

2.0

1/C

I/1/E

N

R&S®TSMA Release Notes Firmware Version 1.32.01.00

© 2017 Rohde & Schwarz GmbH & Co. KG

Muehldorfstr. 15, 81671 Munich, Germany

Phone: +49 89 41 29 - 0

Fax: +49 89 41 29 12 - 164

E-mail: mailto:[email protected]

Internet: http://www.rohde-schwarz.com

Subject to change

R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners.

The firmware of the instrument makes use of several valuable open source software packages. For information, see the "Open Source

Acknowledgement" document, which is available for download from the R&S TSMA product page at https://www.rohde-

schwarz.com/firmware/tsma/.

The following abbreviations are used throughout this document R&S®TSMA is abbreviated as R&S TSMA

Rel

ease

Not

es

1SP

6

mailto:[email protected]

http://www.rohde-schwarz.com/

https://www.rohde-schwarz.com/firmware/tsma/

https://www.rohde-schwarz.com/firmware/tsma/

R&S TSMA Information on the Current Version and History

Release Notes 1177.6081.02 - 10 2

Contents

1 Information on the Current Version and History .............................. 4

1.1 Version 1.32.01.00 ........................................................................................................ 4

1.2 Version 1.32.00.04 ........................................................................................................ 4

1.3 Version 1.31.00.07 ........................................................................................................ 4

1.4 Version 1.30.00.03 ........................................................................................................ 5

1.5 Version 1.28.00.06 ........................................................................................................ 6

1.6 Version 1.27.01.03 ........................................................................................................ 6

1.7 Version 1.20.03 ............................................................................................................. 7

1.8 Version 1.15.03 ............................................................................................................. 8

1.9 Version 1.07 .................................................................................................................. 9

1.10 Version 1.05 .................................................................................................................. 9

1.11 Version 1.04 ................................................................................................................10

2 Firmware Update ............................................................................... 11

2.1 Preparing Installation ................................................................................................11

2.1.1 Choosing the Way of Installation .................................................................................11

2.1.2 Preparation for Local Installation .................................................................................12

2.1.3 Preparation for Remote Installation .............................................................................12

2.1.4 Preparation for TSMA Web-GUI based Installation .....................................................13

2.1.5 Setting Mode of Operation ...........................................................................................13

2.2 Performing Firmware Update ...................................................................................14

2.2.1 Local Installation ..........................................................................................................14

2.2.2 Remote Installation ......................................................................................................15

2.2.3 Using the R&S TSMA Web-GUI ..................................................................................17

2.3 Installation of Remote ViCom Server.......................................................................19

2.3.1 Preparation ..................................................................................................................19

2.3.2 ViCom Server Installation ............................................................................................20

3 Software Installation ......................................................................... 22

3.1 R&S NESTOR Software .............................................................................................22

3.1.1 Preparation ..................................................................................................................22

3.1.2 NESTOR Installation ....................................................................................................22

3.2 QualiPoc© Software ...................................................................................................24

3.2.1 Preparation ..................................................................................................................24

3.2.2 QualiPoc© Installation ...................................................................................................25


Release Notes 1177.6081.02 - 10 3

3.3 R&S ROMES Software ...............................................................................................27

3.3.1 Preparation ..................................................................................................................27

3.3.2 ROMES Installation......................................................................................................27

4 Customer Support ............................................................................ 30


Release Notes 1177.6081.02 - 10 4

1 Information on the Current Version and

History

1.1 Version 1.32.01.00

Improvements

Version Improvements

1.32.01.00 Restart via web-GUI triggers power cycle of scanner sub. component 1.32.01.00 New version of TsmeTools (TsmeTools v1.4.0.2) 1.32.01.00 Watchdog time out triggers power cycle

Solved Problems

Version Solved Problems

1.32.01.00 TSMA6-BP STATE LEDs not operated in stand-by mode

1.2 Version 1.32.00.04

Improvements


1.32.00.04 .NET 4.6..2 is part of the firmware setup 1.32.00.04 Successful ROMES license file installation is confirmed in the web-GUI

Solved Problems


1.32.00.04 Hang-up in battery communication when battery pack is connected 1.32.00.04 Power on via power button sometimes not possible

1.3 Version 1.31.00.07

Firmware package contents

Version Contents

1.31.00.07 Bluetooth configuration in Web-GUI in Win10

1.31.00.07 Additional mode “Smart Monitor” supported in Web-GUI

1.31.00.07 Auto-Power On mode with TSMA-BP power supply

1.31.00.07 Charge indication with TSMA-BP in STB mode

1.31.00.07 ROMES “Probe Mode” removed


Release Notes 1177.6081.02 - 10 5

1.31.00.07 Backup / Recovery Win10

1.31.00.07 Updated online help

Improvements


1.31.00.07 Auto-Refresh off all dynamic Web-GUI contents

1.31.00.07 Remote Shutdown with power on delay 30 s

Solved Problems


1.31.00.07 NESTOR mode not loaded after restart when activated in Web-GUI

1.4 Version 1.30.00.03


Version Contents

1.30.00.03 Reboot button in web-GUI

1.30.00.03 TSME service adaptations for Win10

1.30.00.03 Support Challenger

1.30.00.03 TSME Tools v1.3.5.3

1.30.00.03 ViCom Server v15.80

Improvements


1.30.00.03 Only installed SW packages are offered in mode selection of the web-GUI

Solved Problems


1.30.00.03 Device hang-ups (power button and battery pack communication)

1.30.00.03 ViCom Server does not start after power up

1.30.00.03 Unsynchronized launch of QualiPoc and ROMES Probe processes at device startup

1.30.00.03 Bluetooth adapter disabled after firmware update

1.30.00.03 ViCom SampleApp not selectable in web-GUI for download

1.30.00.03 Failed user backups due to small partition size

1.30.00.03 Wrong device identity with connected TSME in a MIMO setup

Known Issues

Version Known-Issues


Release Notes 1177.6081.02 - 10 6

1.5 Version 1.28.00.06


Version Contents

1.28.00.06 Support for QualiPoc v16.2 (Windows service)

Improvements


1.28.00.06 Online Help updated

1.28.00.06 Reboot requests are indicated in web-GUI status text.

Solved Problems


1.28.00.06 NESTOR mode – service is not started after restart

1.28.00.06 MeasurementConfigVicom.xml not evaluated

1.28.00.06 Web-GUI password protection does not work

1.28.00.06 Firmware not downward compatible with TSMA Access-DLL.

1.28.00.06 Mode changes from “ROMES Probe” mode don’t end ROMES satellite application.

1.28.00.06 Watchdog initiated restarts when not initialized.

Known Issues


1.28.00.06 Bluetooth adapter disabled after firmware update / initial activation via web-GUI requires a restart.

1.28.00.06 ViCom Sample App setup for Android devices is not selectable in File Transfer/Update menu of the web-GUI.

This is only valid for the TSMA ViCom setup v15.75. Will be solved in a higher version

of the TSMA rViCom setup (TSMA-rViCom-Setup-<Version>.exe)..

1.6 Version 1.27.01.03


Version Contents

1.27.01.03 Support for various ROMES modes in web-GUI

1.27.01.03 Configurable start-up delay in web-GUI

1.27.01.03 Auto power off feature in case of DC IN absence – configuration via web-GUI


Release Notes 1177.6081.02 - 10 7

1.27.01.03 User image creation from web-GUI / requires image version 1.03 / 1.09

1.27.01.03 Tool chain to create & deploy a master image

1.27.01.03 Windows tray icon for battery charge

1.27.01.03 TsmeTools update to v1.3.5.1

1.27.01.03 System restart button via web-GUI

1.27.01.03 Remote shut-down support

1.27.01.03 Version info table of all installed SW applications / web-GUI

1.27.01.03 WLAN permanent off configurable via web-GUI

Improvements


1.27.01.03 Auto-refresh of dynamic web-GUI contents (battery power, temperatures)

1.27.01.03 Charging indication off battery pack via LEDs

1.27.01.03 Battery charge indication of battery pack when TSMA powered off / STB

1.27.01.03 WLAN AP is now indicated via the STATE LED

1.27.01.03 Power on hysteresis in case off low power battery state

1.27.01.03 File size limitation for web-GUI based downloads increased to 4 GB

Solved Problems


1.27.01.03 Firmware installation blockings when TsmeTools were updated manually

1.27.01.03 Hang-ups when changing the operation mode in web-GUI

1.27.01.03 Changing band options via Web-GUI

1.27.01.03 Installation / query of NESTOR licenses via Web-GUI

Known Issues


1.7 Version 1.20.03


Version Contents

1.20.03 Update TsmeTools v1.3.4.5

1.20.03 Updated Online Help v05

1.20.03 Default keyboard layout English US

1.20.03 Indication of failed scanner link via STATE LED

1.20.03 Indication of “Scanner Only Mode” via STATE LED

1.20.03 Progress of software installation is indicated by blinking STATE LED

Improvements



Release Notes 1177.6081.02 - 10 8

1.20.03 Auto-Shutdown with low battery power

1.20.03 Status feedback in Web-GUI while firmware / software installation

1.20.03 Minor changes in Web-GUI usability

1.20.03 Selected NESTOR setup is displayed in the Web-GUI

Solved Problems


1.20.03 Instable / missing WLAN access point after power up

1.20.03 Diversity start in “PC mode” when executing setup

Known Issues


1.20.03 Web-GUI does not support installation and query of NESTOR licenses

1.8 Version 1.15.03


Version Contents

1.15.03 Support of NESTOR Measurement Probe

1.15.03 Installation of NESTOR option keys via Web-GUI added

1.15.03 Update TsmeTools v1.3.4.3

Improvements


1.15.03 LAN port setting via Web-GUI

1.15.03 Bluetooth binding via Web-GUI

1.15.03 SCPI Support (Date, Time)

1.15.03 Reliability of WLAN access point if enabled via Web-GUI

Solved Problems


1.15.03 Incomplete firmware setups due to hardware watchdog

Known Issues


1.15.03 Diversity setup 15.1.0.27 alters default WLAN key / manual correction necessary

1.15.03 NESTOR setup 1.4 requires manual setting of Windows firewall permissions

1.15.03 Sporadic absence of WLAN access point after power up


Release Notes 1177.6081.02 - 10 9

1.9 Version 1.07


Version Contents

1.07 Configurable Power On Mode ( Auto Power On / Remember Last State)

1.07 Default paths for measurement applications (NESTOR, rVicom Server, Diversity) are configured with a MeasurementConfig.xml file

1.07 Configuration of TSMA as WLAN client via Web-GUI

1.07 Configuration of NESTOR auto-start mode with selectable workspace via Web-GUI

Improvements


1.07 Matching of LAN/WLAN settings in Web-GUI and in Windows OS

1.07 WLAN Access Point: default on

1.07 Web-GUI now reports absolute state of charge

Known Issues


1.07 NESTOR slave mode configuration in Web-GUI not supported yet

1.07 Applying fixed IP address und subnet mask of LAN port via Web-GUI initializes of LAN Gateway and DNS server address to 10.0.0.4

1.10 Version 1.05


Version Contents

1.05 No changes to previous version

Improvements


1.05 LAN/WLAN configuration in the Web-GUI improved

Known Issues


1.05 NESTOR mode selection / configuration via Web-GUI not supported

1.05 Web interface displays wrong software version

1.05 TSMA configuration as WLAN client via Web-GUI not supported

1.05 DHCP setting in Web-GUI does not set DNS Server to "obtain DNS server automatically

1.05 Fix IP LAN configuration in Web-GUI sets Gateway and DNS server to 10.0.0.4

1.05 Web interface displays ASOC for batteries in overview page


Release Notes 1177.6081.02 - 10 10

1.11 Version 1.04


Version Contents

1.04 TSMA Firmware

1.04 ViCom Server v15.51

1.04 Microcontroller v1.01

1.04 Installation Assistant Service v2.52.18

1.04 Compass Platform v3.1.15.206

1.04 Compass Platform LXI v3.1.15.206

1.04 Visa Runtime v2.53.2.0

1.04 MDNS Service v2.0.320.12

1.04 TSME Tools v1.3.3.6

New Functionality

Version Functions

1.04 Initial release

Known Issues


1.04 LAN/WLAN configuration via Web-GUI might sometimes work not properly

1.04 NESTOR mode configuration in Web-GUI not yet supported

1.04 IP address settings in Web-GUI sometimes not applied in Windows

R&S TSMA Firmware Update

Release Notes 1177.6081.02 - 10 11

2 Firmware Update

Firmware update packages for the R&S TSMA could be downloaded from the Rohde &

Schwarz web page https://www.rohde-schwarz.com/en/firmware/tsma/.

The firmware setup file is named “TSMA-Setup-<Version>.exe”.

Remote ViCom Server Update

“Remote ViCom Server (rViCom server)” is a supplementary firmware package.

This package is only necessary when the R&S TSMA is operated in “rViCom Server”

mode. After firmware installation, please proceed with rViCom server installation, see

Installation of Remote ViCom Server.

For Firmware Version 1.07 and Lower

The local installation, see chapter 2.2.1 Local Installation, is the recommended way to

upgrade devices with firmware 1.07 and lower.

2.1 Preparing Installation

2.1.1 Choosing the Way of Installation

There are several ways how to upgrade R&S TSMA firmware / software. Select the

preferred way.

2.1.1.1 Local execution of the setup file on the R&S TSMA Requires to connect mouse, keyboard and monitor to the R&S TSMA und to execute

the setup file on the device, see Chapter 2.1.2, “Preparation for Local Installation”.

2.1.1.2 Remote execution of the setup file from a distant PC The R&S TSMA need to be connected via LAN / WLAN to the remote PC. The setup is

executed and controlled from the remote PC (Windows 7 / 10). There is no need to

interface the R&S TSMA, see Chapter 2.1.3, “Preparation for Remote Installation”.

2.1.1.3 Web-GUI based upgrade from a handheld device using an USB

stick Requires the setup file to be available on a USB memory stick. The memory stick need

to be connected to an USB socket of the R&S TSMA. The web-GUI could be called

locally on the R&S TSMA or from a remote device (Windows PC) or handheld device

(Android), see Chapter 2.1.4, “Preparation for TSMA Web-GUI based Installation”.

https://www.rohde-schwarz.com/en/firmware/tsma/


Release Notes 1177.6081.02 - 10 12

2.1.2 Preparation for Local Installation

1. Connect mouse, keyboard to the USB ports and a monitor to the mini display port.

Display Port Adapter DVI2HDMI: R&S TSPC-DPDH (R&S No. 3592.4060.02)

2. Switch on the R&S TSMA via power button.

3. Copy the setup file:

a) For firmware installation: Copy the firmware setup file “TSMA-Setup-

<Version>.exe” into a temporary directory on the local disk of the R&S

TSMA.

b) For rViCom server / software installation: Copy the corresponding setup file

into a temporary directory on the local disk of the R&S TSMA.

4. Proceed with section 2.1.5 Setting Mode of Operation.

2.1.3 Preparation for Remote Installation

1. Copy the setup file:


<Version>.exe” into a temporary directory on the remote PC.

b) For rViCom / software installation: Copy the corresponding setup into a

temporary directory on the remote PC.

2. Establish a LAN respectively WLAN connection between the remote PC and the

R&S TSMA, see following section.

2.1.3.1 Using LAN Connection

1. Connect the LAN port (R&S TSMA) with the host PC LAN port. The default LAN

setting of the R&S TSMA is DHCP client. Ask your network administrator for

details on how to configure the remote PC.



2.1.3.2 Using WLAN Connection


2. On the remote PC search for the TSMA WLAN and connect to the network. The

necessary access parameters can be found on a label at the bottom of the device.

WLAN SSID: TSMA-<xxxxxx> xxxxxx: individual serial number

WLAN key: instrument

Per default the WLAN access point is enabled. See in the


Release Notes 1177.6081.02 - 10 13

R&S TSMA User Manual how the enable the WLAN access point when disabled.


2.1.4 Preparation for TSMA Web-GUI based Installation


2. Copy the setup file onto a USB memory stick


<Version>.exe” into the root directory of the stick.

b) For rViCom / software installation: Copy the corresponding setup file into the

root directory of the stick.


2.1.5 Setting Mode of Operation

1. The R&S TSMA Web-GUI has to be loaded to check the mode of operation

a) Remote installation from a WLAN connected device

Start the web browser and enter the following URL:

http://192.168.1.10/

b) Remote installation from a LAN connected device

Enter the URL http://TSMA-xxxxxx.local into the browser.

TSMA-xxxxxx = R&S TSMA host name. This information can be found on a

label at the bottom of the device.

c) Local installation

Open the Internet Explorer. The Web-GUI should be loaded automatically. If

not, enter the URL http://localhost into the browser.

2. The mode of operation is displayed in the overview page. If the mode is already

“PC Mode” you can proceed with step 4.

3. If a different mode is activated, go to the “System” page and select “PC Mode”.

Press the “Submit” button to activate this setting. You are asked if you want to

change to mode. Acknowledge with “OK”. The R&S TSMA will reboot.

https://www.rohde-schwarz.com/search/search_for_manuals_229478.html?term=TSMA


Release Notes 1177.6081.02 - 10 14

A status text is displayed at the bottom of the Web-GUI. The reboot is finished

when “No error” is displayed again.

Double check that “PC Mode” is now activated.

4. The R&S TSMA is ready for firmware update / software installation. Proceed with

2.2, “Performing Firmware Update” respectively 2.3.2, “ViCom Server Installation”

or 3, “Software Installation”.

2.2 Performing Firmware Update

2.2.1 Local Installation

1. Consider the instruction in the chapter 2.1.2, “Preparation for Local Installation”.

2. Open the Windows Explorer and execute the setup file

“TSMA-Setup-<Version>.exe”.

3. The “R&S Software Distributor” window comes up. Select "Local Installation" and

press “Next”.

4. The package dialog lists all the available packages in the setup. Normally, this

dialog can be skipped without any changes. “Automatic Reboot” should be

selected.


Release Notes 1177.6081.02 - 10 15

5. Press “Install” to start setup.

The STATE LED starts blinking blue.

Important Note

Do not switch off or unplug from power while running firmware update!

Several reboot cycles may be executed automatically while running the update.

6. Setup is finished when the R&S TSMA comes up after a reboot. The R&S

distributor dialog is closed automatically.

The STATE LED changes into constant green or amber.

7. Reload the R&S TSMA Web-GUI and double check the displayed firmware

version in the “Overview” menu. The correct version number need to be indicated.

The R&S TSMA is ready for operation.

2.2.2 Remote Installation

1. Consider the instruction in chapter 2.1.3, “Preparation for Remote Installation”.

2. Execute the firmware setup file on the connected remote PC. The “R&S Software

Distributor” dialog box is coming up.


Release Notes 1177.6081.02 - 10 16

3. Select "Remote Installation" and click "Next >".

4. The package dialog lists all the available packages to install.

All packages, which you need to install are already pre-selected.

5. Click “Next >”.

6. After a while any detected R&S TSMA in the network is listed in the “Device List”

dialog. Tick the device(s) to update. If the column “serial number” is not filled

move the mouse pointer over the listed items to get related device information.

7. Click "Install".

Do not switch off or remove power from the R&S TSMA while executing this

update!

8. The state of the installation process is displayed in the “Status” column. The

process is finished when the status indicates “Ready…”.

9. Press “Exit”.

10. Reload the R&S TSMA Web-GUI and verify the installed firmware version in the

“Overview”



Release Notes 1177.6081.02 - 10 17

2.2.3 Using the R&S TSMA Web-GUI

1. Consider the instructions in chapter 2.1.4, “Preparation for TSMA Web-GUI based

Installation”.

2. In the R&S TSMA Web-GUI navigate to the “File Transfer / Update” menu. Open

the “Select Firmware Setup File” select box.

3. Select the appropriate firmware setup file TSMA-Setup-<Version>.exe and

press the “Execute Setup” next to the select box.

4. A confirmation dialog box appears. Confirm with “OK” to start the update.

5. The firmware installation starts. The Web-GUI displays “Installation in progress…”.

The STATE LED is blinking blue for the whole update process.

During firmware upgrade the device may run several reboot cycles.


Release Notes 1177.6081.02 - 10 18


update!

6. At the end of the installation the status text in the R&S TSMA Web-GUI changes

to “Installation finished – system is rebooting”.

7. After the reboot the R&S TSMA Web-GUI is refreshed automatically. The upgrade

is finished when the status text changes to “No error” and the STATE LED

changes into constant green or amber.

8. The “Overview” page in the Web-GUI need to display the installed firmware

version.


Release Notes 1177.6081.02 - 10 19


2.3 Installation of Remote ViCom Server

The “Remote ViCom Server” package is supplementary for the R&S TSMA. This

package is pre-installed on any shipped R&S TSMA.

An upgrade of the Remote ViCom package is only necessary when operating the R&S

TSMA in “rViCom Server” mode.

This installation could be neglected when running the R&S TSMA in any other mode of

operation (NESTOR, ROMES, QualiPoc).

The installed version on the R&S TSMA need to match with the applied version of the

rViCom client API on the remote Android device. So be careful to update.

In cases of a client / server version mismatch there are the following possibilities:

a) Downgrade the rViCom server version on the R&S TSMA to match with the

applied rViCom client version on the Android device.

b) Upgrade the rViCom client version on the connected tablet / smartphone to

comply with the installed rViCom server version on the R&S TSMA.

2.3.1 Preparation

1. Download the firmware setup file TSMA-rViCom-Setup-<Version>.exe from

the product support database https://www.rohde-schwarz.com/en/firmware/tsma/.

2. Choose the way of installation and follow the instructions how to prepare, see

Chapter 2.1.1, “Choosing the Way of Installation”.

https://www.rohde-schwarz.com/en/firmware/tsma/


Release Notes 1177.6081.02 - 10 20

2.3.2 ViCom Server Installation

2.3.2.1 ViCom Server Local Installation

1. Open the Windows Explorer and execute the setup file

“TSMA-rViCom-Setup-<Version>.exe”.


press “Next”.

3. All subsequent steps are similar to local firmware installation, see Chapter 2.2.1,

“Local Installation” step 4.


update!

4. Setup is finished when the STATE LED changes from blinking blue to constant

green or amber (firmware version ≥ 1.20.03).

2.3.2.2 ViCom Server Remote Installation

1. Execute the setup file TSMA-rViCom-Setup-<Version>.exe on the remote

PC.

2. The “R&S Software Distributor” comes up. Select "Remote Installation" and press

“Next >”.


Release Notes 1177.6081.02 - 10 21

3. All subsequent steps are similar to remote firmware installation, see Chapter

2.2.2, “Remote Installation” step 4.

2.3.2.3 ViCom Server Installation via Web-GUI

1. Select the appropriate firmware setup file TSMA-rViCom-Setup-

<Version>.exe and press the “Execute Setup” next to the select box.

2. All subsequent steps are similar to firmware installation via web-GUI, see Chapter

2.2.3, “Using the R&S TSMA Web-GUI” step 4.

R&S TSMA Software Installation

Release Notes 1177.6081.02 - 10 22

3 Software Installation

Only use the dedicated TSMA setups for software installation.

3.1 R&S NESTOR Software

Only execute the dedicated NESTOR setup for TSMA. The setup file is named:

TSMA-NESTOR-Setup-<Version>.exe.

3.1.1 Preparation

1. Download the software setup file TSMA_NESTOR_Setup-<Version>.exe from

the Rohde & Schwarz FTP server respectively NESTOR CD-ROM.



3.1.2 NESTOR Installation

3.1.2.1 NESTOR Local Installation

1. Open the Windows Explorer and execute the NESTOR setup file

“TSMA_NESTOR_Setup-<Version>.exe”.


press “Next”.


Release Notes 1177.6081.02 - 10 23




update!



3.1.2.2 NESTOR Remote Installation

1. Execute the setup file “TSMA_NESTOR_Setup-<Version>.exe” on the remote

PC.


“Next >”.




Release Notes 1177.6081.02 - 10 24


update!

3.1.2.3 NESTOR Installation via Web-GUI

1. Select the appropriate NESTOR setup file “TSMA_NESTOR_Setup-

<Version>.exe” and press the “Execute Setup” next to the select box.

2. All subsequent steps are similar to firmware installation via Web-GUI, see Chapter


3.2 QualiPoc© Software

Only execute the dedicated QualiPoc© setup for TSMA. The setup file is named:

DiversityProbe4QP-DeploymentKit-<Version>.exe.

3.2.1 Preparation

1. Download the QualiPoc© setup file “DiversityProbe4QP-DeploymentKit-

<Version>.exe” from the Rohde & Schwarz FTP server respectively QualiPoc©

CD-ROM.


Release Notes 1177.6081.02 - 10 25



3.2.2 QualiPoc© Installation

3.2.2.1 QualiPoc© Local Installation

1. Open the Windows Explorer and execute the QualiPoc© setup file

“DiversityProbe4QP-DeploymentKit-<Version>.exe”.


press “Next”.




update!



3.2.2.2 QualiPoc© Remote Installation

1. Execute the QualiPoc© setup file “DiversityProbe4QP-DeploymentKit-

<Version>.exe” on the remote PC.


“Next >”.


Release Notes 1177.6081.02 - 10 26




update!

3.2.2.3 QualiPoc© Installation via Web-GUI

1. Select the appropriate QualiPoc© setup file “DiversityProbe4QP-

DeploymentKit-<Version>.exe” and press the “Execute Setup” next to the

select box.




Release Notes 1177.6081.02 - 10 27

3.3 R&S ROMES Software

3.3.1 Preparation

1. Download the ROMES setup file “TSMA_ROMES_Setup-<Version>.exe” from

the Rohde & Schwarz FTP server respectively ROMES CD-ROM.



3.3.2 ROMES Installation

3.3.2.1 ROMES Local Installation

1. Open the Windows Explorer and execute the ROMES setup file

“TSMA_ROMES_Setup-<Version>.exe”.


press “Next”.




update!



3.3.2.2 ROMES Remote Installation


Release Notes 1177.6081.02 - 10 28

1. Execute the ROMES setup file “TSMA_ROMES_Setup-<Version>.exe” on the

remote PC.


“Next >”.




update!

3.3.2.3 ROMES Installation via Web-GUI

1. Select the appropriate ROMES setup file “TSMA_ROMES_Setup-

<Version>.exe” and press the “Execute Setup” next to the select box.


Release Notes 1177.6081.02 - 10 29



R&S TSMA Customer Support

Release Notes 1177.6081.02 - 10 30

4 Customer Support

Technical support – where and when you need it

For quick, expert help with any Rohde & Schwarz equipment, contact one of our

Customer Support Centers. A team of highly qualified engineers provides telephone

support and will work with you to find a solution to your query on any aspect of the

operation, programming or applications of Rohde & Schwarz equipment.

Up-to-date information and upgrades

To keep your instrument up-to-date and to be informed about new application notes

related to your instrument, please send an e-mail to the Customer Support Center

stating your instrument and your wish. We will take care that you will get the right

information.

Europe, Africa, Middle East Phone +49 89 4129 12345 [email protected]

North America Phone 1-888-TEST-RSA (1-888-837-8772) [email protected]

Latin America Phone +1-410-910-7988 [email protected]

Asia/Pacific Phone +65 65 13 04 88 [email protected]

China Phone +86-800-810-8828 / +86-400-650-5896 [email protected]






Documents

R&S TSMA Release Notes Firmware Version 1.32.01 · PDF file1.32.00.04 Successful ROMES license file ... 1.30.00.03 Unsynchronized launch of QualiPoc and ROMES ... 1.20.03 Instable