Upload
lynx-pro-audio
View
219
Download
0
Embed Size (px)
DESCRIPTION
RS Series guide 2015
Citation preview
A culture of sound
Product Guide
www.lynxproaudio.com4
The cost-effective RS Series amplifiers are designed for the professionals researching quality, reliability and value.
RS Series
RS4-2000 RS4-3000 RS4-4000 Output power z
@ 2 Ohms 4 x 500 W 4 x 750 W 4 x 1000 W
@ 4 Ohms 4 x 400 W 4 x 700 W 4 x 1000 W
@ 8 Ohms 4 x 220 W 4 x 450 W 4 x 630 W
Bridge @ 4 Ohms 2 x 1000 W 2 x 1500 W 2 x 2000 W
Bridge @ 8 Ohms 2 x 800 W 2 x 1400 W 2 x 2000 W
Frequency Response ± 0.25dB 20 Hz – 20 KHz 20 Hz – 20 KHz 20 Hz – 20 KHz
Phase Response @ 1 W 20Hz-20KHz ±15 deg ±15 deg ±15 deg
Total Harmonic Distortion 20Hz-20KHz <0.05% <0.05% <0.05%
Intermodulation Distortion SMPTE <0.05% <0.05% <0.05%
Damping Factor 20-500Hz @ 8 Ohms >500 >500 >500
Crosstalk 20Hz-1KHz >75 dB >75 dB >75 dB
Voltage Gain 32 dB 32 dB 32 dB
Sensitivity Rated Power (26/32/38dB Gain) 1.1 V 1.5 V 1.8 V
Signal to Noise Ratio 20Hz-20KHz 101dBA 103dBA 104dBA
Required AC Mains
Operating Voltage (50Hz-60Hz) 170V -265V AC 170V -265V AC 170V -265V AC
Power on Idling (@230V) 0.5 A 0.5 A 0.5 A
1/8 Rated Power (@4 Ohm) 7 A 8 A 10 A
Dimmensions
W x H x D (mm) 483 x 88.9 x 254 483 x 88.9 x 254 483 x 88.9 x 254
W x H x D (inches) 19 x 3.5 x 10 19 x 3.5 x 10 19 x 3.5 x 10
Weight 6 Kg / 13 lbs 6 Kg / 13 lbs 6 Kg / 13 lbs
Protections Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, ICL™, PMS™ and SSP™
RS4
www.lynxproaudio.com 5
RS amplifiers represent the best compromise between economy and performances, taking advantage of latest improvements in electronic assembly.
RS2-1000 RS2-1500 RS2-2000 RS2-3600Output power
@ 2 Ohms 2 x 500 W 2 x 750 W 2 x 1000 W 2 x 1800 W
@ 4 Ohms 2 x 400 W 2 x 700 W 2 x 1000 W 2 x 1750 W
@ 8 Ohms 2 X 240 w 2 x 450 W 2 x 650 W 2 x 950 W
Bridge @ 4 Ohms 1000 W 1500 W 2000 W 3600 W
Bridge @ 8 Ohms 800 W 1400 W 2000 W 3500 W
Frequency Response ± 0.25dB 20 Hz – 20 KHz 20 Hz – 20 KHz 20 Hz – 20 KHz 20 Hz – 20 KHz
Phase Response @ 1 W 20Hz-20KHz ±15 deg ±15 deg ±15 deg ±15 deg
Total Harmonic Distortion 20Hz-20KHz <0.05% <0.05% <0.05% <0.05%
Intermodulation Distortion SMPTE <0.05% <0.05% <0.05% <0.05%
Damping Factor 20-500Hz @ 8 Ohms >500 >500 >500 >500
Crosstalk 20Hz-1KHz >75 dB >75 dB >75 dB >75 dB
Voltage Gain 32 dB 32 dB 32 dB 32 dB
Sensitivity Rated Power (26/32/38dB Gain) 1.1 V 1.5 V 1.8 V 2.2 V
Signal to Noise Ratio 20Hz-20KHz 101dBA 103dBA 104dBA 105dBA
Required AC Mains
Operating Voltage (50Hz-60Hz) 170V -265V AC 170V -265V AC 170V -265V AC 170V -265V AC
Power on Idling (@230V) 0.5 A 0.5 A 0.5 A 0.5 A
1/8 Rated Power (@4 Ohm) 3.5 A 4 A 5 A 10 A
Dimmensions
W x H x D (mm) 483 x 88.9 x 254 483 x 88.9 x 254 483 x 88.9 x 254 483 x 88.9 x 254
W x H x D (inches) 19 x 3.5 x 10 19 x 3.5 x 10 19 x 3.5 x 10 19 x 3.5 x 10
Weight 5 Kg / 11 lbs 5 Kg / 11 lbs 6 Kg / 13 lbs 6 Kg / 13 lbs
Protections Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, ICL™, PMS™ and SSP™
RS2
www.lynxproaudio.com 6
The technical specifications described in this catalogue can vary without previous notification.
If you want to recieve the printed version of this catalogue just click here:
You can find us in all these social media: