Embed Size (px)
Citation preview
Superior Gear Technology
www.renold.com
Inline Helical Gear UnitsRP Series
RP Inline Geared Motors - Gear Units
www.renold.com
22
REMOVABLEINSPECTION COVERAllows periodic inspectionof gearing during routinemaintenance
ALLOY HOUSINGis vacuum impregnated with Resinol RT (MIL-STD 276) forprotection and sealing. No secondaryfinish required but readily accepts paint
FLANGEFully modular to IEC andCompact integratedmotor. NEMA flange
FEETRemovable feet.With patented lockingsystem.
GEARSHardened and ground gears.
OUTPUT SHAFTWith wellproportionedbearings.
FOOT PRINTSCompatible to the mainstandard of the market.
OIL SEALTwo oil sealson request.
SINGLE-PIECE ALUMINUM ALLOY HOUSINGCombines light weight with high tensilestrength.Precision machined for alignment of bearings and gearing.Applications:
l Conveyor Drives
l Mixer Drives
l Packaging Machinery
l Food Industry
l Sewage Treatment
l Textiles Industry
l Water Treatment
Contents
www.renold.com
3
HP RATING TABLESA.G.M.A Service Factor 4
How to Use 6
1/3 HP 7
1/2 HP 8
3/4 HP 10
1 HP 12
1 1/3 HP 14
2 HP 15
3 HP 16
5 HP 18
7 1/3 HP 19
How to Order 20
MAXIMUM RATINGS TABLESHow to Use 22
DIMENSIONS SINGLE REDUCTION311A 23
411A 24
511A 25
DIMENSIONS DOUBLE-TRIPLE REDUCTION ALUMINUM202A 26
302A 28
402A 30
403A 30
452A 32
502A 34
503A 34
602A 36
603A 36
DIMENSIONS DOUBLE-TRIPLE REDUCTION (CAST IRON)402C 38
403C 38
602C 40
603C 40
TECHNICAL INFORMATIONOverhung Loads and Thrust Loads 42
Radial and Axial Loads 43
Lubrication 44
Optional Accessories 48
Maintenance Check List 51
Selectional Check List 52
Installation Check List 53
Parts List 54
Motor Dimensions Reference 55
Page No
The gearbox speed reducer ratings in this catalogue are for a 1.00 service factor or( Class I )* service. A 1.00 service factorapplies when the use of the reducer is for continuous service free from recurrent shock loading and does not exceed8 hours per day for Aluminum and 10 hours per day for Cast Iron. When operating conditions are different from thosedescribed above, the input horsepower and torque ratings shown in this catalogue must be divided by the appropriate servicefactor indicated in the table below. The catalogue ratings may be used without adjustments if the actual driven machinehorsepower and torque requirements are multiplied by the appropriate service factor indicated in the table below.
A.G.M.A. GEAR REDUCER LOAD CLASSIFICATIONS
DURATION OF SERVICE( HOURS PER DAY )
A.G.M.AService Factors Service Factors
* Class I: ( Minumum 0.8 Service Factor ) A gearmotor can operate with steady loads not exceeding the normal rating and 8-10 hours of running time per day.
This chart is a guideline for the types of loads applied to the following.Parallel ( helical ) reducers.
LOAD CLASSIFICATIONOF THE MACHINERY DESIGN
WHEN FREQUENT STOPS/STARTSARE APPLIED IN EXCESS OF 10/HOUR
UNIFORMMODERATE
SHOCKHEAVYSHOCK
UNIFORMMODERATE
SHOCKHEAVYSHOCK
½ Hours or less
2 Hours Intermittently
10 Hours
24 Hours
0.80
1.00
1.00
1.25
0.80
1.00
1.25
1.50
1.00
1.25
1.50
1.75
0.80
1.0
1.25
1.50
1.25
1.50
1.75
2.00
0.80
1.25
1.50
1.75
LOADING
8 - 10 HOUR SERVICE 24 HOUR SERVICE
ENGINE DRIVEN APPLICATIONS
For multiple cylinder engine drive applications, the service factors are greater then those shown above for electric drives.Service factors for multiple cylinder engine drives may be determined from the conversion table below.
ELECTRIC MOTORDRIVE
UNIFORM
MODERATE
HEAVY
1.00
1.25
1.75
MULTIPLE CYLINDERENGINE*
ELECTRIC MOTORDRIVE
MULTIPLE CYLINDERENGINE*
1.25
1.50
2.00
1.25
1.50
1.75
1.50
1.75
2.00
* These service factors apply essentially to driven applications without extreme variations.
Normal starting or occasional peak loads, two or three times per day, up to 300% of catalogue rating at 1800 RPM arepermissible. If either the frequency or the magnitude of these loads exceed the above limits, a higher service factor isrequired and the application should be referred to Renold.
Gearbox reducers are not to be considered fail safe or self-locking devices. If these features are required, a properlysized, independent holding device should be utilized.
Depending upon gear geometry and operating conditions, gearbox reducers may or may not backdrive.Special consideration should be given to high inertia loads connected to the reducer output shaft. Consult Renold forfurther details.
Reducers driven by brakemotors must be sized to accomodate motor driving, brake and inertia loads toprevent the breaking torque or inertia loads from exceeding the motor rating.
For safety, purchaser or user should provide protective guards over shaft extensions and any couplingssheaves and belts, sprockets and chains, etc., mounted thereon.
! CAUTION
www.renold.com
4
A.G.M.A.
Application
8 to 10Hour Service
Service Factor
24 HourService
8 to 10Hour Service
24 HourService
8 to 10Hour Service
24 HourService
NORMAL INDUSTRIALUSAGESteady load not exceedingnormal rating of motor orintermittent shock.Moderate shockHeavy shock
1.001.251.75
1.251.50
Refer tofactory
AGITATORS
BLOWERS
BREWING & DlSTILLING
CAR DUMPERS
CAR PULLERS
CLARIFIERS
CLASSIFIERS
CLAY WORKINGMACHINERY
COMPRESSORS
CONVEYORS
CONVEYORS
CRANES & HOISTS
Pure liquidsLiquids-Variable Densily
CentrifugalLobe
Bottling MachineryBrew Kettles, continuos dutyCookers, continuos dutyMash Tubs, continuos dutyScale Hopper( Frequent Starting )
Brick PressBriquette MachinesClay Working MachineryPlug Mill
CentrifugalLobeReciprocating Multi-cylinders( within 3% cyclic variation )
Single Cylinder
( Uniformly loaded or Fed )
Flighl, Oven, Screw
( Heavy duty or dual drive notuniformly fed )
Apron, Assembly, Belt,Bucket, Flight,Oven Screw,Reciprocating, Shaker
Main Hoists - Medium duty- Heavy duty
Skip hoistsTravel motionTrolley motion
Reciprocating,
Cable Reels, ConveyorsCutter Head DrivesJig Drives, Screen DrivesStackersUtilily Winches
DREDGES
See Cranes
ELEVATORS
FANS
FOOD INDUSTRY
HOISTS -
LAUNDRY WASHERS
LAUNDRY TUMBLERS
MACHINE TOOLS
MlLLS ( Rotary Type )
MIXERS
LINE SHAFTS
PAPER MILL
( Conveyor type -same as conveyors )
CentrifugalCooling rowers
Large ( Mine, etc. )Light small diameter
Beet SlicersCereal CookersDough MixerMeal Grinders
Punch Press(Gear connected to load )Notching press ( Belt driven )
Plate planersOther machine toolsmain drivesAuxiliary drives( Feed Traverse, etc. )
Draw Bench Carriages &Main DrivesForming MachinesPinch, Dryer and ScrubberRolls ( Reversing )SlittersSmall rolling mill, drivesTable Conveyors( Non reverse )Table Conveyors( Reversing )
Wire Drawing & FlatteningMachines
Ball, dryer coolerCement kilns, pebble rodKilnsTumbling barrels
Concrete Mixers - continuosConcrete Mixers - intermittentConstant densityVariable density
Driving processing equipmentOther line shafts
Bleacher pressesConveyors, suction rollWindersAgitators ( Mixers )Dryer, felt stretcherStock chest calendersBeater & PulperJordansCouch, cylinders
METAL MILLS
RUBBER INDUSTRY
PUMPS
SEWAGE DISPOSALEQUIPMENT
SCREENS
OIL INDUSTRY
TEXTILE INDUSTRY
MixerRubber calenderRubber millTire building machinesTire and tube press openersTubers or strainers
CentrifugalGear and rotaryConstant density fluidGear and rotaryVariable density fluidProportioning pumpsReciprocating with opendischargeReciprocatingmulticylinder, double actingReciprocatingsingle cylinderReversing duty
Inside service
Rotary - Stone or gravelTraveling Water Intake
Oil well pumping( Not over 150% peak torque )RefineriesChillers, rotary kilnParaffin filter press
Batchers, calendersCard Machines, dry cansDyeing Machinery, manglesNappers, soapersSpinners tenter frames
1.001.25
1.001.25
1.001.001.001.001.25
1.75
1.25
1.00
1.25
1.751.751.251.25
1.001.25
1.25Refer tofactory
1.00
1.251.251.251.75
1.251.75Refer
tofactory
1.251.751.751.251.25
1.251.50
1.251.50
1.251.251.251.251.50
1.75
1.50
1.25
1.50
1.751.751.501.50
1.251.50
1.50Refer tofactory
1.25
1.501.501.501.75
1.501.75Refer
tofactory
1.501.751.751.501.50
1.00Refer tofactory1.251.00
1.25Refer tofactory1.501.25
1.251.001.251.25
1.25
1.75Refer tofactory1.751.25
1.00
1.00
1.75Refer tofactory1.251.751.25
Refer tofactory1.25
--
1.251.75
1.251.001.001.25
1.251.00
1.001.001.001.251.251.251.251.251.25
1.501.251.501.50
1.50
1.75Refer tofactory1.751.50
1.25
1.25
1.75Refer tofactory1.501.751.50
Refer tofactory1.50
1.501.501.501.75
1.50-
1.251.50
1.501.25
1.251.251.251.501.501.501.501.751.50
Refer tofactoryRefer tofactory
Refer tofactory
1.25 1.50
--
1.75Refer toFactory
-
1.751.751.75
Refer toFactory
1.50
1.251.25
2.00
1.50
2.00
1.50Refer toFactoryRefer toFactory
1.001.00
2.00
1.25
1.00
1.25Refer toFactoryRefer toFactory
1.00 1.25
1.251.00
1.501.25
1.751.251.251.25
1.751.501.501.50
1.251.251.251.251.25
1.501.501.501.501.50
Application Service Factor Application Service Factor
The application service factors shown above are considered typical for most applications. Where loads are lighter than normal, where units are operated seasonally,or where unusual severe conditions exist, refer to Renold.For application assistance refer to Renold.
SPEED REDUCER LOAD CLASSIFICATION
Service Factors
www.renold.com
5
NEMA Frame Selections
1750 RPM Input
105 1.33187 10.86 311A
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
One Stage
Ratio
Alu
min
um
Cast
Iron
HP1/3
Nbr.Red.
1 5/8
OutputShaftDIA
Available MotorFlanges
Standard
56C
OnRequest
-
Pages
...- -
105 1.33187 10.86 411A1 3/4 143-5TC 56C ...- -
Alu
min
um
-
-
Find the desired HP and output speed from pages 07 to 19
*If the application requires a service factor greater than 1.0,
service factor from the AGMA table is 2,
select a higher horsepower rated reducer.
For example, if the required horsepower is 1 but the select a reducer rated for 2 HP
( 1HP times Service Factor of 2 = 2HP ) and of the desired output speed. However, use a 1HP drive motor.
Read the Torque
Note the Ratio Note theNumber (Stage)
of reductions
Note the OutputShaft ( Diameter )
Select theMotor Flange
* As an alternative to Step 1 and 2 make a quick selection directly from the Hp tables on pages 23 to 41.
Step 1:
Selection by Hp and Speed
Alu
min
um
105 1.33187 10.86 311A
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioNbr.Red.
1 5/8
OutputShaftDIA
Available MotorFlanges
Standard
56C -
Pages
...- -
105 1.33187 10.86 411A1 3/4 143-5TC 56C ...- -
-
-
Select the reducer type: ( Aluminum Green and Orange ); Cast Iron ( Red ).Step 2:
Optional
Two Stages Two or Three Stages Two or Three StagesOne Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
See additional Selection Check List on page 51.
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
One Stage
Ratio
Alu
min
um
Cast
IronNbr.
Red.
OutputShaftDIA
Available MotorFlanges
StandardOn
Request
Pages
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
See “How to Order” on pages 20 - 21 for product codes and options.
Single Reduction
Light Duty Double Reduction Double and Triple Reduction
Strong Cast Iron
Double and Triple Reduction
Check others selection details.
Step 4:
Step 3:
www.renold.com
6
HP1/3
OutputTorque(Ib-in)
NEMA Frame Selections
1750 RPM Input
ServiceFactor
OutputSpeed(RPM)
RatioNr°
Red.
OutputShaftDIA
Dim.on
Page
56C
37 1.16 534 46.87 -2 5/8 56C -202A -
35 1.09 567 49.76 -2 5/8 56C -202A -
-
-
509 39 3.44 -2 5/8 56C -202A --
409 49 4.28 -2 5/8 56C -202A --
321 62 5.45 -2 5/8 56C -202A --
281 71 6.23 -2 5/8 56C -202A --
243 82 7.20 -2 5/8 56C -202A --
226 88 7.74 -2 5/8 56C -202A --
178 112 9.85 -2 5/8 56C -202A --
153 4.08 130 11.42 -2 5/8 56C -202A --
134 3.58 148 13.03 -2 5/8 56C -202A --
116 3.09 172 15.10 -2 5/8 56C -202A --
108 2.88 184 16.20 -2 5/8 56C -202A --
93 2.48 214 18.78 -2 5/8 56C -202A --
83 2.21 241 21.15 -2 5/8 56C -202A --
80 2.14 249 21.84 -2 5/8 56C -202A --
67 1.77 300 26.31 -2 5/8 56C -202A --
61 1.88 329 28.88 -2 5/8 56C -202A --
49 1.52 409 35.91 -2 5/8 56C -202A --
46 1.44 429 37.69 -2 5/8 56C -202A --
4.74
5.02
5.40
6.24
7.13
9.08
11.30
-2 3/4302A -
-2 302A - 3/4
1.44 874 50.67 -2 1- 402C
1.27 1068 61.89 -2 - 402C 1
23
18
23 1.31 839 74.77 -3 1 56C --
20 1.13 973 86.66 -3 - 1 56C -
18 1.29 1068 96.85 -3 - 1 56C -
17 1.36 1135 102.89 -3 - 1 56C -
15 1.07 118.29 -3 - 403C 11305
28
23
1.21
0.99
705
858
61.89
49.76
-
-
-
-
403A
403A
403A
403A
-
-
-
-
-
56C
56C
56C
56C
56C
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
1115 18 1.57 311A1 5/8 56C - 23- --20.25
616 32 2.84 311A1 5/8 56C -- --11.66
532 37 3.29 311A1 5/8 56C -- --11.67
452 44 3.87 311A1 5/8 56C -- --8.16
379 53 4.62 311A1 5/8 56C -- --8.16
278 72 6.30 311A1 5/8 -- --5.84
213 94 8.22 311A1 5/8 56C -- --3.65
161 124 10.86 311A1 5/8 56C -- --2.02
139 142 8.22 311A1 5/8 56C -- --2.41
105 187 10.86 311A1 5/8 56C -- --1.33
1140 RPM Input
Available MotorFlanges
14 0.99 1394 126.40 -3 - 1 56C -
1.10 135.69 -3 - 403C 1149713
8 1.16 218.26 -3 - 1.252407
-
-
403A
503A
-
56C
56C 143-5TC
143-5TC
13 0.92 1497 135.69 -3 - 1 56C -- 403A
Input shaft bushing
required - see page 49
23
23
23
23
23
23
23
23
23
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
29
29
31
39
31
31
39
39
39
31
31
31
35
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
See How To Order on pages 20 - 21
Two Stages Two or Three Stages Two or Three Stages
www.renold.com
7
NEMA Frame Selections
1750 RPM Input
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 48.See How To Order on pages 20 - 21
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
1140 RPM Input
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioNbrRed.
OutputShaftDIA
HP1/3
1140 RPM Input
7.2 1.42 241.82 -3 - 1.3752667
6.3 1.10 278.62 -3 - 1.3753073
6 1.33 292.57 -3 - 1.3753227
1.10 278.62 -3 - 603C 1.37530736
-
-
-
603A
603A
603A
- 56C
56C
56C
56C 143-5TC
143-5TC
143-5TC
143-5TC
Available MotorFlanges
7.2 1.14 241.82 - - 1.252667 - 503A 56C 143-5TC
NEMA Frame Selections
1750 RPM InputHP1/2
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioNbrRed.
OutputShaftDIA
509
409
321
281
243
226
178
153
134
116
3.44
4.28
5.45
6.23
7.20
7.74
9.85
11.42
13.03
15.10
59 - 5/8 56C -202A --7.46
74 - 5/8 56C -202A --5.99
94 - 5/8 56C -202A --4.71
107 - 5/8 56C -202A --4.12
124 - 5/8 56C -202A --3.56
134 - 5/8 56C -202A --3.31
170 - 5/8 56C -202A --3.13
197 - 5/8 56C -202A --2.70
225 - 5/8 56C -202A --2.36
260 - 5/8 56C -202A --2.04
498 11.32 61 3.52 - 402A - 1- 143-5TC56C
401 10.26 75 4.37 - 402A - 1- 143-5TC56C
315 8.95 96 5.56 - 402A - 1- 143-5TC56C
275 7.43 110 6.36 - 402A - 1- 143-5TC56C
239 8.14 126 7.33 - 402A - 1- 143-5TC56C
222 7.57 136 7.89 - 402A - 1- 143-5TC56C
174 7.42 173 10.06 - 402A - 1- 143-5TC56C
150 7.43 201 11.66 - 402A - 1- 143-5TC56C
132 6.00 229 13.26 - 402A - 1- 143-5TC56C
128 5.24 236 13.68 - 402A - 1- 143-5TC56C
1115 27 1.57 311A1 5/8 56C -- --13.37
616 49 2.84 311A 5/8 56C -- --7.70
532 57 3.29 311A 5/8 56C -- --7.70
452 67 3.87 311A 5/8 56C -- --5.38
379 80 4.62 311A 5/8 56C -- --5.39
278 109 6.30 311A 5/8 56C -- --3.85
213 142 8.22 311A 5/8 56C -- --2.41
161 187 10.86 311A 5/8 56C -- --1.33
139 213 8.22 311A 5/8 56C -- --1.60
Available MotorFlanges
3
Dim.on
Page
Dim.on
Page
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
23
23
23
23
23
23
23
23
23
35
37
37
37
41
27
31
27
31
27
31
27
31
27
31
27
31
27
31
27
31
27
31
31
27
www.renold.com
8
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioAvailable Motor
Flanges
HP1/2
108
93
83
80
67
61
16.20
18.78
21.15
21.84
26.31
28.88
279 - 5/8 56C -202A --1.90
324 - 5/8 56C -202A --1.64
365 - 5/8 56C -202A --1.46
377 - 5/8 56C -202A --1.41
454 - 5/8 56C -202A --1.17
498 - 5/8 56C -202A --1.24
114 5.18 265 15.37 - 402A - 1- 143-5TC56C
106 3.87 284 16.20 - 402A - 1- 143-5TC56C
97 4.41 311 18.04 - 402A - 1- 143-5TC56C
92 3.34 330 18.80 - 402A - 1- 143-5TC56C
81 3.70 372 21.54 - 402A - 1- 143-5TC56C
79 3.73 385 22.29 - 402A - 1- 143-5TC56C
65 2.38 462 26.30 - 402A - 1- 143-5TC56C
60 2.71 507 29.40 - 402A - 1- 143-5TC56C
46
37
35
35
28
32
29
28
25
24
25
23
20
18
15
14
13
11
11
35
1.32
1.05
1.30
1.44
1.27
1.21
1.34
1.05
1.16
1.22
1.38
1.12
0.96
1.01
1.43
1.32
1.33
1.01
1.29
0.99
650 37.69
808 46.87
874 50.67
874 50.67
1068 61.89
907 53.36
1023 61.22
1052 61.90
1186 70.95
1227 73.43
1186 70.95
1249 74.77
1448 86.66
1618 96.85
1959 117.22
2116 126.65
2283 136.62
2762 165.29
2630 157.40
858 49.76
3/4
3/4
1
1
1
1
1
1
1
1
1
1
1
1
1.25
1.375
1.25
1.25
1.25
3/4
56C
56C
56C
56C
56C
28 1.01 1086 61.88 1 143-5TC56C
-
-
-
-
-
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
49
46
35.91
37.69
619 5/8 56C -1.00
650 5/8 56C -0.95
48 1.74 630 35.91 1 143-5TC56C
46 2.08 662 38.37 1 143-5TC56C
37 1.34 823 46.86 1 143-5TC56C
12 145.68 1.375 143-5TC56C
1.375 143-5TC56C12 1.39 2434 145.68
49 35.91619 3/4 56C -1.38
1.39 2434
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
302A
302A
402A
-
-
403A
403A
403A
403A
403A
-
-
-
-
503A
503A
503A
503A
603A
302A
-
-
-
402C
402C
-
-
-
-
-
403C
403C
403C
403C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 402A --
- 202A --
- 202A --
- 402A --
- 402A --
- 402A --
- -- 603A
- - 603C-
- 302A --
Dim.on
Page
2
2
2
2
2
2
2
2
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
31
27
31
31
27
31
27
31
27
31
27
31
27
31
27
31
29
29
31
27
29
29
31
31
31
31
31
31
31
31
39
39
39
39
39
39
41
35
35
35
37
37
35
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
NbrRed.
OutputShaftDIA
NEMA Frame Selections
1750 RPM Input
Input shaft bushing
required - see page 49See How To Order on pages 20 - 211140 RPM Input
www.renold.com
9
10
9.4
9.4
1.01
1.22
1.22
3014 180.40 3
3096 185.29 3
3096 185.29 3
1.25
1.375
1.375
143-5TC56C
143-5TC56C
143-5TC56C
3 1.375 143-5TC56C11 1.29 2630 157.40
-
-
-
503A
603A
-
-
-
603C
-
-
-
- - 603C-
8.5
7.8
8.6
7.8
0.99
1.15
0.99
1.15
3433 205.43 3
3746 224.18 3
3411 204.12 3
3746 224.18 3
1.375
1.375
1.375
1.375 143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
-
-
-
-
603A
603A
-
-
-
-
603C
603C
-
-
-
-
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioAvailable Motor
Flanges
NEMA Frame Selections
1750 RPM InputHP1/2
NbrRed.
OutputShaftDIA
NbrRed.
OutputShaftDIA
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 48.See How To Order on pages 20 - 21
1140 RPM Input
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1115 41 1.57 411A1 3/4- --8.90
616 74 2.84 1 - --5.12
532 85 3.29 1 - --5.13
452 100 3.87 1 - --3.58
379 120 4.62 1 - --3.59
278 163 6.30 1 - --2.56
213 213 8.22 1 - --1.60
139 319 8.22 1 - --1.07
411A
411A
411A
411A
411A
411A
411A
3/4
3/4
3/4
3/4
3/4
3/4
3/4
NEMA Frame Selections
1750 RPM InputHP3/4
509
409
321
281
243
226
178
153
134
3.44
4.28
5.45
6.23
7.20
7.74
9.85
11.42
13.03
89 -2 302A --4.72
111 -2 --3.79
141 -2 --2.98
161 -2 --3.65
187 -2 --3.15
201 -2 --3.35
255 -2 --3.13
296 -2 --3.27
338 -2 --2.84
302A
302A
302A
302A
302A
302A
302A
302A
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
498 7.54 91 3.52 2 - 402A - 1-
401 4.37 2 - 402A - 1- 143-5TC56C
315 5.56 2 - 402A - 1-
275 6.36 2 - 402A - 1-
239 7.33 2 - 402A - 1-
222 7.89 2 - 402A - 1-
174 10.06 2 - 402A - 1-
150 11.66 2 - 402A - 1-
132 13.26 2 - 402A - 1-
6.83 113
5.96 144
4.95 165
5.42 190
5.04 205
4.94 261
4.95 302
4.00 344
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143/5TC 56C
Available MotorFlanges
1140 RPM Input
Dim.on
Page
Dim.on
Page
41
41
41
41
35
37
37
37
24
24
24
24
24
24
24
24
29
29
29
29
29
29
29
29
29
31
31
31
31
31
31
31
31
31
www.renold.com
10
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
NEMA Frame Selections
1750 RPM Input
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
RatioAvailable Motor
Flanges
HP3/4
116
108
15.10
16.20
391 - --2.45
420 - --2.03 302A
302A
3/4
3/4
128 13.68 2 - 402A - 1-
114 15.37 - 402A - 1-
3.49 355
3.45 398
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
93
83
80
67
18.78
21.15
21.84
26.31
487 - --1.75
548 - --1.75
566 - --1.77
682 - --1.25 302A
302A
302A
302A
3/4
3/4
3/4
3/4
106 16.20 - 402A - 1-
97 18.04 - 402A - 1-
92 18.80 - 402A - 1-
81 21.54 - 402A - 1-
79 22.29 - 402A - 1-
65 26.30 - 402A - 1-
2.57 427
2.94 468
2.22 495
2.46 558
2.48 578
1.58 694
61 28.88748 - --1.28 302A 3/4
143-5TC56C
49 35.91931 - --0.92 302A 3/4
60 29.40 - 402A - 1-1.80 762 143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
1140 RPM Input
19
37
35
40
29
35
17
19
13
14
13
11
2365
1215
1097
1271
1271
1537
2329
2628
3179
3408
3408
4123
60.90
46.87
43.69
50.64
50.64
61.21
92.78
-
-
-
-
-
-
-
-
-
-
-
-
-
-
403A
403A
-
-
503A
503A
603A
603A
-
-
-
402C
-
-
403C
403C
-
-
-
-
603C
603C
1.25
1
1
1
1
1
1.25
1.25
1.375
1.375
1.375
-
-
-
452A
-
-
-
-
-
-
-
-
1.375
48 35.91 - 402A - 1-
46 38.37 - 402A - 1-
37 46.86 - 402A - 1-
947
994
1236
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143/5TC 56C0.89
1.11
1.17
1.08
1.29
1.07
1.20
1.16
1.35
1.11
1.11
1.04
1.16
1.38
0.89
11 4150 - 603A -- 1.375 143-5TC56C1.03
NbrRed.
OutputShaftDIA
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
2
3
3
3
3
3
3
31
31
31
31
31
31
31
31
31
31
31
31
31
35
35
37
37
37
29
29
29
29
29
29
29
29
33
31
39
39
39
41
41
104.68
126.65
135.74
135.74
164.23
165.29
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Dim.on
Page
www.renold.com
11
NbrRed.
OutputShaftDIA
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
Dim.on
Page
NEMA Frame Selections
1750 RPM InputHP1
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
402A
402A
402A
402A
402A
402A
402A
402A
402A
402A
402A
402A
402A
302A
302A
302A
302A
302A
302A
302A
302A
302A
302A
302A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
411A
411A
411A
411A
411A
411A
411A
511A
511A
511A
511A
511A
511A
511A
511A
511A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1.57
2.84
3.29
3.87
4.62
6.30
8.22
1.30
2.45
3.31
4.31
5.27
7.63
10.50
7.63
10.50
3.44
4.28
5.45
6.23
7.20
7.74
9.85
11.42
13.03
15.10
16.20
3.52
4.37
5.56
6.36
7.33
7.89
10.06
11.66
13.26
13.68
15.37
16.20
18.04
113
134
159
217
284
114
149
182
263
362
395
543
119
148
188
215
248
267
340
394
449
521
559
121
151
192
219
253
272
347
402
458
472
530
569
622
54
98
45
85
13.22
12.78
6.68
3.85
3.85
2.69
2.69
1.93
1.20
9.46
7.92
6.48
3.83
1.93
2.56
1.29
3.54
2.85
2.24
2.74
2.37
2.52
2.35
2.45
2.13
1.84
1.53
5.66
5.13
4.48
3.72
4.07
3.78
3.71
3.72
3.00
2.62
2.59
1.93
2.21
1115
616
532
452
379
278
213
1346
714
529
406
332
229
167
149
109
509
409
321
281
243
226
178
153
134
116
108
498
401
315
275
239
222
174
150
132
128
114
106
97
1140 RPM Input
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
3/4-302A218.786481.3293
1402A-18.806591.6792
3/4-302A21.157301.3183
2
2 -
-
-
-
-
- 143-5TC56C
143-5TC56C
143-5TC56C
25
25
25
25
25
25
25
25
25
24
24
24
24
24
24
24
29
29
29
29
29
29
29
29
29
29
29
29
29
31
31
31
31
31
31
31
31
31
31
31
31
31
31
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
www.renold.com
12
HP1
NbrRed.
OutputShaftDIA
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
Dim.on
Page
NEMA Frame Selections
1750 RPM Input
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
402A 1-21.547431.8581
80 21.84753 -1.33 302A 3/4
79 22.29 402A 1-1.86 769
67 26.31908 -0.94 302A 3/4
65 26.30 402A 1-1.19 923
61 28.88996 -0.96 302A 3/4
60 29.40 402A 1-1.35 1014
48 35.91 402A 1-0.87 1261
46 38.37 402A 1-1.04 1324
49 1.09 1239 35.91 - - 402C 1
46
46
46
1.17
1.15
1.14
1283
1281
1324
38.40
38.34
38.37
403A
-
-
403C
402C
1
1
1
-
-
-
40 1.12 1460 43.69 - - 403C 1
29
29
1.00
1.05
2101
2101
60.90
60.90
452A
- 502A
- 1.25
1.25
26 1.26 2213 66.22 - 503A 1.25
23
23
21
21
21.2
20.9
23
21.2
1.25
1.19
1.09
1.36
1.23
1.36
1.05
1.23
2536
2563
2793
2793
2750
2793
2536
2750
49.00
76.69
83.59
83.59
82.30
83.59
49.00
82.30
-
-
-
-
-
452A
-
- 603A
603A
503A
503A
-
-
-
-
602C
603C
603C
1.375
1.25
1.25
1.375
1.375
1.375
1.25
1.375
1140 RPM Input
2
2
2
2
2
2
2
2
2
2
2
3
3
3
2
2
3
3
2
2
3
3
3
3
3 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
19
19
19
1.08
1.38
1.38
3151
3101
3101
60.90
92.78
92.78
2
3
3
-
-
- 603A
602C
-
603C
1.375
1.375
1.375
17
15
17
15
14
1.23
1.10
1.23
1.10
1.01
3498
3917
3498
3917
4232
104.68
117.22
104.68
117.22
126.65
3
3
3
3
3
-
-
-
-
-
603A
603A
-
-
-
-
603C
603C
603C
1.375
1.375
1.375
1.375
1.375-
-
-
-
-
-
-
-
-
-
-
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
143-5TC56C
25 1.43 2373 71.01 - 603A 1.253 - - 143-5TC56C
31
29
31
29
31
29
31
31
31
31
33
33
35
35
35
35
37
37
37
37
37
37
39
39
39
39
41
41
41
41
41
41
41
41
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
www.renold.com
13
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
NEMA Frame Selections
1750 RPM Input1 HP1/2
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1115 81 1.57 411A1 3/4- --4.46
616 147 2.84 1 - --2.57
532 170 3.29 1 - --2.57
452 200 3.87 1 - --1.79
379 239 4.62 1 - --1.80
278 326 6.30 1 - --1.28
411A
411A
411A
411A
411A
3/4
3/4
3/4
3/4
3/4
1346 67 1.30 511A1 1.125- --8.82
714
529
406
332
229
167
149
8.52
6.30
5.28
4.32
2.56
1.29
1.70
127
171
223
273
395
543
593
2.45
3.31
4.31
5.27
7.63
10.50
7.63
511A1 1.125- --
511A1 1.125- --
511A1 1.125- --
511A1 1.125- --
511A1 1.125- --
511A1 1.125- --
511A1 1.125- --
498 3.77 182 3.52 2 - 402A --
401 4.37 2 - 402A --
315 5.56 2 - 402A --
275 6.36 2 - 402A --
239 7.33 2 - 402A --
222 7.89 2 - 402A --
174 10.06 2 - 402A --
150 11.66 2 - 402A --
132 13.26 2 - 402A --
128 13.68 2 - 402A --
114 15.37 2 - 402A --
106 16.20 2 - 402A --
97 18.04 2 - 402A --
92 18.80 2 - 402A --
81 21.54 2 - 402A --
79 22.29 2 - 402A --
60 29.40 2 - 402A --
3.42 226
2.98 288
2.48 329
2.71 379
2.52 409
2.47 520
2.48 603
2.00 686
1.75 708
1.73 795
1.29 853
1.47 934
1.11 989
1.23 1115
1.24 1154
0.90 1521
79 1.13 1152 22.26 2 - 402C- -
67 0.99 1361 26.31 2 - 402C- -
60 1.08 1521 29.40 2 - 402C- -
43 1.22 2096 40.50 2 452A -- 1.25-
1140 RPM Input
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
43 1.27 2096 40.50 2 - 602C- 1.375-
43 1.21 2096 40.50 2 -502A 1.25-
43 1.27 2096 40.50 2 -602A 1.375-
40 0.92 2288 44.22 2 -452A 1.25-
36 1.05 2536 49.00 2 -452A 1.25
40 0.97 2288 44.23 2 -502A 1.25
36 1.10 2536 49.00 2 -502A 1.25
37 1.28 2367 47.22 3 -503A 1.25
-
-
-
-
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
-
-
-
-
-
-
-
25
25
25
25
25
25
25
25
24
24
24
24
24
24
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
33
33
33
39
39
39
41
35
35
35
35
37
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
www.renold.com
14
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
36 1.25 2536 49.00 2 -602A 1.375
29 1.08 3151 60.90 2 602A 1.375
36 1.25 2536 49.00 2 602C- 1.375
29 1.08 3151 60.90 2 602C- 1.375
32 1.11 2744 54.73 3 503A 1.25
26 1.29 3319 66.22 3 603A 1.375
23 1.12 3844 76.69 3 603A 1.375
-
-
-
-
-
-
-
NEMA Frame Selections
1750 RPM Input1 HP1/2
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
1140 RPM Input
-
-
-
--
-
-
-
-
-
-
26 1.29 3319 66.22 3 1.375
25 0.95 3560 71.01 3 1.375
23 1.12 3844 76.69 3 1.375
-
-
-
56C143/5TC
56C143/5TC
56C143/5TC-
-
- 603C-
603C-
603C-
NEMA Frame Selections
1750 RPM InputHP2
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1
1
1
1
1
1
1
1
1.30
2.45
3.31
4.31
5.27
7.63
10.50
7.63
3.52
4.37
5.56
6.36
7.33
7.89
10.06
11.66
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
169
228
297
364
526
724
790
243
301
384
439
506
545
694
804
249
292
346
419
469
549
652
789
906.61
6.39
4.73
3.96
3.24
1.92
0.97
1.28
2.83
2.57
2.24
1.86
2.04
1.89
1.86
1.86
5.33
5.16
5.12
5.28
5.23
4.83
4.13
3.37
1346
714
529
406
332
229
167
149
498
401
315
275
239
222
174
150
485
414
349
288
257
220
185
153
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
402A
402A
402A
402A
402A
402A
402A
402A
-
-
-
-
-
-
-
-
452A
452A
452A
452A
452A
452A
452A
452A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
511A
511A
511A
511A
511A
511A
511A
511A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1140 RPM Input
37
37
37
37
35
41
41
41
41
41
25
25
25
25
25
25
25
25
31
31
31
31
31
31
31
31
33
33
33
33
33
33
33
33
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 48.See How To Order on pages 20 - 21
www.renold.com
15
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Trhee Stages Two or Thee Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
NEMA Frame Selections
1750 RPM InputHP2
1.250
1.250
1.250
1.250
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
13.26
13.68
15.37
16.20
18.04
18.80
21.54
22.29
14.21
16.62
20.10
24.98
24.98
16.20
18.78
21.54
915
944
1061
1137
1246
1318
1486
1538
980
1147
1387
1723
1724
1118
1296
1486
1.50
1.31
1.30
0.97
1.10
0.83
0.92
0.93
2.15
2.35
1.91
1.22
1.28
1.21
1.05
1.11
132
128
114
106
97
92
81
79
123
105
87
70
70
108
93
81
1140 RPM Input
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
49 1.14 2455 35.58 2
60 1.33 2029 29.41 2 1.250
49 1.08 2455 35.58 2 1.250
56C143/5TC
56C143/5TC
56C143/5TC
402C
402C
402C
-
-
-
-
-
-
-
-
-
-
-
-
-
402A
402A
402A
402A
402A
402A
402A
402A
-
-
-
-
502A
-
-
-
452A
452A
452A
452A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
502A-
- - -452A
-452A-
-
-
-
44 1.20 2659 39.79 3 503A
40 1.11 3051 44.23 2 602A 1.375
44 1.40 2659 39.79 3 603A 1.375
37
32
31
1.36
1.18
1.12
3156
3658
3819
47.22
54.73
57.13
3
3
3
603A 1.375
603A 1.375
603A 1.375
40 1.11 3052 44.23 2 602C 1.375
44 1.40 2659 39.79 3 603C 1.375
37 1.36 3156 47.22 3 603C 1.375
32 1.18 3658 54.73 3 603C 1.375
31 1.12 3819 57.13 3 603C 1.375-
-
-
-
-
43 0.92 2794 40.50 2 - 1.250452A
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NEMA Frame Selections
1750 RPM InputHP3
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1.125
1.125
1.125
-
-
-
-
-
-
-
-
-
511A
511A
511A
1
1
1
1.30
2.45
3.31
135
254
343
4.41
4.26
3.15
1346
714
529
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
1.250
1.250
1.250
31
31
31
31
31
31
31
31
35
35
35
33
39
33
33
33
33
33
33
39
39
37
37
37
37
37
41
41
41
41
41
25
25
25
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
1140 RPM Input
www.renold.com
16
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
NEMA Frame Selections
1750 RPM InputHP3
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1.125
1.125
1.125
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1
1
1
1
1
1
1
1
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
402A
402A
402A
402A
402A
402A
402A
402A
402A
-
-
-
-
-
-
-
-
-
502A
502A
502A
502A
502A
502A
502A
502A
502A
452A
452A
452A
452A
452A
452A
452A
452A
452A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
511A
511A
511A
-
-
-
-
-
-
-
-
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4.31
5.27
7.63
3.52
4.37
5.56
6.36
7.33
7.89
10.06
11.66
13.26
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
14.21
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
14.21
446
545
790
364
452
575
658
759
817
1041
1206
1373
374
438
518
628
704
824
978
1183
1471
374
437
519
628
1471
1183
978
824
704
2.64
2.16
1.28
1.89
1.71
1.49
1.24
1.36
1.26
1.24
1.24
1.00
3.55
3.44
3.41
3.52
3.48
3.22
2.75
2.24
1.44
3.45
3.34
3.31
3.42
3.66
3.44
3.11
1.51
2.37
406
332
229
498
401
315
275
239
222
174
150
132
485
414
349
288
257
220
185
153
123
485
414
349
288
257
220
185
153
123
1402C--28.969271.37195
1402C--210.0410391.21174
1402C--211.6412051.12150
1402C--213.2613721.10132
1402C--215.3715911.04114
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
56C143/5TC
1.250
1.250
-
-
-
502A
452A
-
2
2
16.62
16.62
1720
1720
1.56
1.77
105
105
87 1.28 2080 20.10 2 - - 1.250452A
87 20.10 2 502A - 1.250-1.35 2080
71 24.61 2 502A - 1.250-1.10 2546
-
-
-
-
-
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
70 0.82 2585 24.98 2 - - 1.250452A
70 24.98 2 502A - 1.250-0.86 2586
224.9825861.3170 602A - 1.375--
-
- 143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
31
33
33
33
33
33
33
33
33
33
33
33
33
35
35
35
35
35
35
35
35
35
35
35
35
35
31
31
31
31
31
31
31
31
25
25
25
39
39
39
39
39
37
Input shaft bushing
required - see page 49See How To Order on pages 20 - 211140 RPM Input
www.renold.com
17
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
224.9825861.3170 - 602C 1.375-
60 29.41 2 502A - 1.250-1.00 3044
229.4130441.2460 602A - 1.375-
229.4130441.2460 - 602C 1.375-
235.5836831.1649 602A - 1.375-
235.5836831.1649 - 602C 1.375--
-
-
-
-
-
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
NEMA Frame Selections
1750 RPM InputHP3
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
1140 RPM Input
NEMA Frame Selections
1750 RPM InputHP5
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
315 1.05 957 5.55 2 -- 402C 1-
485 2.13 623 3.61 2 - - - 1.250452A
414 2.06 730 4.23 2 - - - 1.250452A
349 2.05 864 5.01 2 - - - 1.250452A
288 2.11 1047 6.07 2 - - - 1.250452A
257 2.09 1173 6.81 2 - - - 1.250452A
220 1.93 1373 7.96 2 - - - 1.250452A
185 1.65 1630 9.45 2 - - - 1.250452A
153 1.35 1971 11.43 2 - - - 1.250452A
123 0.86 2451 14.21 2 - - - 1.250452A
485 2.07 623 3.61 2 - 502A - 1.250-
414
349
288
257
220
185
153
123
4.23 2 -
5.01 2 -
6.07 2 -
6.81 2 -
7.96 2 -
9.45 2 -
11.43 2 -
14.21 2 -
502A - 1.250-
502A - 1.250-
502A - 1.250-
502A - 1.250-
502A - 1.250-
502A - 1.250-
502A - 1.250-
502A - 1.250-
2.00
1.99
2.05
2.19
2.06
1.86
0.90
1.42
729
865
1046
2451
1972
1630
1373
1174
485 2.27 623 3.61 2 - 602A - 1.375-
414
349
288
257
220
185
153
2
2
2
2
2
2
2
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
4.23
5.01
6.07
6.81
7.96
9.45
11.43
2.36 729
2.38 865
2.22 1046
2.49 1174
2.31 1373
2.11 1630
1.74 1972
239 1.00 1264 7.33 2 -- 402C 1-
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
41
41
41
35
37
37
33
33
33
33
33
33
33
33
33
35
35
35
35
35
35
35
35
35
37
37
37
37
37
37
37
39
39
37
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 48.See How To Order on pages 20 - 21
60 29.41 2 452A - 1.250-0.88 3044 - 143/5TC182/4TC 33
www.renold.com
18
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Thee Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
One Stage
Alu
min
um
Cast
Iron
Alu
min
um
Alu
min
um
Two Stages Two or Three Stages Two or Three Stages
Available MotorFlanges
NbrRed.
OutputShaftDIA
Dim.on
Page
NEMA Frame Selections
1750 RPM InputHP5
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
2 --87 1.24 3467 20.10 602C 1.375-
105 0.94 2867 16.62 2 - - - 1.250452A
105 16.62 2 - 502A - 1.250-1.06 2866
123
105
87
71 2
2
2
2
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-
- 602A - 1.375-14.21
16.62
20.10
24.61
1.38 2451
1.50 2866
1.24 3467
1.00 4244
1140 RPM Input
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
ServiceFactor
OutputSpeed(RPM)
OutputTorque(Ib-in)
Ratio
NEMA Frame Selections
1750 RPM Input7 HP1/2
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
602C
602C
602C
602C
602C
602C
602C
602C
602C
602C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
602A
602A
602A
602A
602A
602A
602A
602A
602A
602A
502A
502A
502A
502A
502A
502A
502A
502A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
14.21
16.62
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
14.21
16.62
3.61
4.23
5.01
6.07
6.81
7.96
9.45
11.43
934
1094
1296
1570
1762
2059
2445
2957
3676
4300
934
1093
1297
1570
1761
2060
2445
2958
3676
4299
934
1093
1297
1570
2958
2445
2060
1761
1.52
1.57
1.59
1.48
1.66
1.54
1.40
1.16
0.92
1.00
1.52
1.57
1.59
1.48
1.66
1.54
1.40
1.16
0.92
1.00
1.38
1.34
1.32
1.37
1.46
1.38
1.24
0.95
485
414
349
288
257
220
185
153
123
105
485
414
349
288
257
220
185
153
123
105
485
414
349
288
257
220
185
153
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
143/5TC182/4TC
37
33
35
37
37
37
41
35
37
41
35
37
41
35
37
41
35
37
41
35
37
41
35
37
41
35
37
41
35
37
41
37
41
37
41
Input shaft bushing
required - see page 49See How To Order on pages 20 - 21
Input shaft bushing
required - see page 48.See How To Order on pages 20 - 21
www.renold.com
19
How To:Typical
Product
Code
Typical
Product
Code
Typical
Product
Code
266 Lb.in.
402C
602C
403C
603C
311A
511A
411A
452A
402/3A
302A
202A
443 Lb.in.
502/3A
602/3A
1046 Lb.in.
621 Lb.in.
1064 Lb.in.
2660 Lb.in.
1330 Lb.in.
2837 Lb.in.
4079 Lb.in.
1729 Lb.in.
1729 Lb.in.
4079 Lb.in.
4079 Lb.in.
M
P
R
B
P
M
Double & Triple Reduction Cast Iron
Aluminum Single Reduction
Aluminum Double & Triple Reduction
Motorized
Predisposed
Type “R”
Modular Base
Input Style
Motorized
Predisposed
Type “R”
Modular Base
P
R
B
P
P
Input Style
Input Style
Motorized
Predisposed
Type “R”
Modular Base
M
P
R
B
www.renold.com
20
ø
D
D
Output
Shaft
Diameter
Output Flange
Diameter
Without Flange
Reducer
Type/SizeMounting Ratio
See technicaldata table
Input Flange
NEMA Frame Size
Mounting
Position
See tablesPage 46
402/3C
602/3C
602/3C
Output
Flange Mounted
Without
Flange-Feet
Order
Reducer
Type/SizeOutput
Shaft
Diameter
Mounting
Output
Flange Mounted
Without
Flange-Feet
Ratio
See technicaldata table
Output Flange
Diameter
Input Flange
NEMA Frame Size
Mounting
Position
See tablesPage 44
311A
411A
511A
31
1A
Without Flange
You see feet code in thechart of the dimensions
Output
Flange Mounted
Without
Flange-Feet
202A
302A
402/3A
452A-502/3A
602/3A
202A-302A402/3A
452A-502/3A602/3A
Output
Shaft
Diameter
Output Flange
Diameter
Mounting
Without Flange
-F
D
311A
D
Q 3
SP
402C -F 5.55 X V6
-N
-F
-NNema 182-4TC
B1 1.57 X 3 X V6
-N
-F
Q 3
B1
202A B1 3.44 X V6
311A
411A
511AX = Dia 0.625”
O = Dia 0.750”
Y = Dia 1.125”
D
U =2 =3 =4 =
NemaDiaDiaDia
143/5TC5.51”6.30”7.87”
(140mm)
(160mm)
(200mm)
NemaDiaDiaDia
U =3 =4 =5 =
143/5TC6.30”7.87”9.84”
(160mm)
(200mm)
(250mm)
U =2 =3 =4 =
NemaDiaDiaDia
143/5TC5.51”6.30”7.87”
(140mm)
(160mm)
(200mm)
N =W=Nema 56C
X =Nema143-5TC
Y =
202A
302A
402/3A
452A
502/3A
602/3A
X = Dia 0.625”
O = Dia 0.750”
Q = Dia 1.00”
T = Dia1.250”
Z = Dia1.375”
1 =
2 =
3 =
4 =
5 =
Dia
Dia
Dia
Dia
Dia 9
4.72”
5.51”
6.30”
7.87”
.84”
( )
( )
( )
( )
( )
120mm
140mm
160mm
200mm
250mm
Dia
Dia
Dia
3 =
4 =
5 =
6.30”
7.87”
9.84”
( )
( )
( )
160mm
200mm
250mm
D
N =
402C
403C
602C
603C
Q = Dia1.00”
Z = Dia1.375”
N =
1 =
2 =
3 =
4 =
Dia
Dia
Dia
Dia
4.72”
5.51”
6.30”
7.87”
( )
( )
( )
( )
120mm
140mm
160mm
200mm
Dia
Dia
Dia
3 =
4 =
5 =
6.30”
7.87”
9.84”
( )
( )
( )
160mm
200mm
250mm
ø
Without Flange ø 0.625”K =
Without Flange ø 0.875”N =
Without Flange ø 1.125”S =
Nema 182-4TC
W=Nema 56C
X =Nema143-5TC
Y =
ø
Without Flange ø 0625”K =
Without Flange ø 0.875”N =
Without Flange ø 1.125”S =
Nema 182-4TC
W=Nema 56C
X =Nema143-5TC
Y =
Without Flange ø 0.625”K =
Without Flange ø 0.875”N =
Without Flange ø1.125”S =
Reducer
Type/SizeRatio
See technicaldata table.
Input Flange
NEMA Frame Size
Ratings Overview
Input Bore
NEMA
Input Bore
NEMA
Input Bore
NEMA
41
1A
51
1A
Mounting
Position
See tablesPages 44-45
Feet MountedH1
402/3C
www.renold.com
21
*-
c1
0.45
0.45
s1f1e1b1
4.33
3.74
5.12
4.53
0.14
0.12
0.35
0.352
1750 RPM Input
Output
Torque
(Ib-in)
Input
HP
356 3.72
1.0 Service Factor Alluminum Case
Output Shaft ( ” )Available Motor
Flanges
On
RequestStandard Standard
On
Request
202A Lb.in. 620.64 Output shaft Diameter 0.625”
Reduction
bushing
0.625 56C3/4 --
Select the OUTPUT SPEED, and the RATIO
Select the MOUNTING FEET and the OUTPUT SHAFT
202A
Output
Flange
Options:
Suffix
feet
code:
Option 1
a1
6.30
5.51
Option 2
Or select an OUTPUT FLANGE
Step 4 Go to page 20 - 21 to see how to order / options / etc.
For example:
Output
Speed
(RPM)
509
Ratio
3.44
Be sure to consider Service Factor.
Selection By Size / Torque and Speed
Competitive
Reference
Feet
code:
S2 With
motor flange
Sew R17 - Old R32
Lenze Type 03
Lenze Type 04
0.59 0.35
0.20 0.35
0.20 0.35
4.55
5.87
6.50
5.16
2.91
4.02
4.33
2.36
2.99
5.12
4.13
5.20
4.33
3.58
4.13
2.95
2.56
3.15
2.28
2.06
2.08
1.97
-
-
S1
L3
L4
1.65
3.83
3.19
0.73
2.91
2.26
0.3 56C
0.69 56C
0.1 56C
* OH1TL SRHG L1G1 LQ ø1
Motorized Feet Mount
G1
1/4-20x0.620.98
5.07
3.30 1.77
0.14Nr°4 - M8x0.55
ø2.95
90°
H1
A
1.57
LG
O
H
LQ
T
Ø1R
S
ø2.3
6
1/4-20x0.62
S2
Cm
ax.g6
4.63
L1
5/8
Step 2
Step 3
5/8
5/8
1.44
a1
c1
f1
b1
e1
s1
k1
3
1/4-20x0.621/4-20x0.62
1.6
13.4
1
Find the TORQUE / SIZEStep 1
www.renold.com
22
139
105
Lb.in. 266
Motorized Flange Mount
Motorized Base Mount
1750 RPM Input1.0 Service Factor Aluminum Case
Output shaft Diameter 0.625”
g6
3/1
61.26
2.7
6
* For other options see page 49
* For other options see page 49
5.12
6.50
4.53
e1
5.87
4.73
4.73
4.73
k1
4.82
1.43
1.43
1.43
k2
1.34
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625 0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
0.75-0.875
Option 1
0.35
0.43
0.350.45
0.14
0.14
0.12
4.33
5.12
3.74
6.30
7.87
5.51
Option 2
Option 3
0.45
0.45
2
3
4
311AOutput Flange
Options:
Suffix
feet code
s1c1 f1b1a1
Dia
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
1140 RPM Input
377 3.84616
359
3.84532
2.68452
2.69379
0.78
362 6.66 0.6251115
0.43
1.92278
429
419
342
437
250
1.20213
0.66161
342
250
Output ShaftAvailable Motor
FlangesStandard
2.84
3.29
3.87
4.62
8.22
1.57
10.86
6.30
8.22
10.86
0.75-0.875 56C-
56C-
56C-
56C-
56C-
56C-
56C-
56C-
56C-
56C-
-
-
-
-
-
-
-
-
-
-
Optional
4.41Lbs. Mod. Base
k2
b1
a1
k1
c1
f1
0.625*
e1
s1
Input
Flange g6
Input
Flange A g6
56C 4.58 6.50
5.29Lbs. With Flange
56C 6.50
For the correct compilation of the order code see page 20
0.6
25
*
Option Nema 0.410.61 0.134.506.50U
1/4-20x0.62 1/4-20x0.621.57
3.44
Nr°4 - M8x0.59 1.02
A
0.625*
0.71
3/1
6
1.95
g61
.50ø2
.36
2.95Nr°4 - M8x0.553.81 0.98
0.625*
0.71
311A
Available also with Feetsee page 48
www.renold.com
23
Output shaft Diameter 0.750”
1.0 Service Factor Aluminum Case
Lb.in. 443
139
105
3/1
6
Lbs. Mod. Base
411A
Input
Flange A g6
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
1140 RPM Input
377616
359
532
452
379
3621115
278
429
419
342
437
250
213
161
342
250
Output Shaft
Standard
2.84
3.29
3.87
4.62
8.22
1.57
10.86
6.30
8.22
10.86
143-5TC 56C0.750
143-5TC
143-5TC
143-5TC
143-5TC
56C
56C
56C
56C
3.84
3.84
2.68
2.69
0.78
6.66
0.43
1.92
1.20
0.66
143-5TC
143-5TC
56C
56C
143-5TC 56C
143-5TC 56C
143-5TC 56C
Optional
143/5TC 4.96 6.50
For the correct compilation of the order code see page 20
Available Motor
Flanges
-
-
-
-
-
-
-
-
-
-
With Motor Shaft Reduction Bushing
Option 1
0.35
0.43
0.350.45
0.14
0.14
0.12
4.33
5.12
3.74
6.30
7.87
5.51
Option 2
Option 3
0.45
0.45
2
3
4
411AOutput Flange
Options:
Suffix
feet code
s1c1 f1b1a1
Dia
b1
a1
g6
c1
f1
0.750*
e1
s1
0.8
75
*
k2 k1
Option Nema 0.410.61 0.134.506.50U
* For other options see page 49
* For other options see page 49
7.27Lbs. With Flange
Input
Flange g6
143/5TC 6.50
6.39
0.750*
0.84
3/1
6
1.95
g61
.50ø2
.36
2.95Nr°4 - M8x0.554.42 1.38
0.750*
0.84
1.26
2.7
6
1.57
A
3.98
Nr°4 - M8x0.59 1.02
1/4-20x0.621/4-20x0.62
5.12
6.50
4.53
e1
5.87
5.08
5.08
5.08
k1
5.18
1.44
1.44
1.44
k2
1.34
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
0.625-0.875
1750 RPM Input
Available also with Feetsee page 48
www.renold.com
24
A
s1c1 f1b1a1
Dia
Option 1
0.43
0.55
0.370.39
0.14
0.14
0.14
5.12
7.09
4.33
7.87
9.84
6.30
Option 2
Option 3
0.39
0.45
3
4
5
511AOutput Flange
Options:
Suffix
feet code
Option Nema 0.410.61 0.134.506.50U
511A Lb.in. 1046
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
1140 RPM Input
1080 12.74714
1177
9.43529
7.89406
6.46332
2.49149
593 13.181346
1.25109
3.82229
1177
1009
1009
1080
699
1.92167 699
Output Shaft ( ” )
Standard
2.45
3.31
4.31
5.27
7.63
1.30
10.5
7.63
10.5
- 182-4TC1.125
1.125
1.125
-
-
-
-
-
-
-
-
1.125
1.125
1.125
1.125
1.125
1.125
182-4TC
182-4TC
182-4TC
182-4TC
182-4TC
182-4TC
182-4TC
182-4TC
1.0 Service Factor Aluminum Case
Optional
Available Motor
Flanges
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
56C
56C
56C
56C
56C
56C
56C
56C
56C
Output shaft Diameter 1.125”
For the correct compilation of the order code see page 20
b1
1.125*
a1
k1
c1
f1
1,79
s1
e1
g6
1.1
25
*With Motor Shaft Reduction Bushing
Lbs. Mod. Base 10.79
Input
Flange A g6
182/4TC 6.66 8.88
Input
Flange A g6
143/5TC 5.96 6.50
1.24
1/4
2.40
1.9
7ø2.6
0
5/16-18x1.14
1.97
5.00
g6
5.47 1.97
0.96
1/4
3.15Nr°5 - M8x0.71 1.32Nr°4 - M10x0.51 1.43
3.8
6
1.125*
0.875* 1/4-20x0.71
12.78Lbs. With Flange
Input
Flange g6 k1
182/4TC 8.88 6.84
Input
Flange g6 k1
143/5TC 6.50 6.146.50
8.46
5.12
e1
5.87
1750 RPM Input
* For other options see page 49
Available also with Feetsee page 48
www.renold.com
25
Lb.in. 621 Output shaft Diameter 0.625”
Output Shaft ( ” )Available Motor
Flanges
Standard
202A
0.625 0.750
Optional
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
0.625 0.750
1.0 Service Factor Aluminum Case 1750 RPM Input
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
1140 RPM Input
2.99 4.28409
2.35 5.45321
443 2.05 6.23281
443 1.78 7.20243
443 1.65 7.74226
531 1.56 9.85178
531 1.34 11.42153
531 1.18 13.03134
531 1.02 15.10116
531 0.95 16.20108
531 0.82 18.7893
531 0.73 21.1583
531 1.70 21.8480
531 0.58 26.3167
620 0.62 28.8861
620 0.50 35.9149
620 0.48 37.6946
620 0.38 46.8737
0.36 49.7635
0.23 49.76
443 3.72 3.44509
0.19 61.89
0.29 61.8928
443
443
620
620
620
620
23
18
www.renold.com
26
1.02
Nr°4 M08x063
2.38
2.7
6
7.05Lbs. With Feet
202A
Competitive
Reference
Feet
code:
S2 With
motor flange
Sew R17 - Old R32
Lenze Type 03
Lenze Type 04
Bonfiglioli 112-(102)
0.59 0.35
0.20 0.35
0.20 0.35
4.55
5.87
6.50
2.95
2.56
3.15
2.28
2.06
2.08
S1
L3
L4
1.65
3.83
3.19
0.3 56C
0.69 56C
0.1 56C
Leeson P1100
Bison 482
0.44-3.003.08U1 2.56 0.25 56C
OH1HG G1 ø1
Bonfiglioli 112-(102)
-
Output Flange
Options:
Output
flange code
Option 1
s1
0.35
0.43
0.35
c1
0.45
f1
0.14
0.14
0.12
b1
4.33
5.12
3.74
a1
6.30
7.87
5.51
Option 2
Option 3
0.45
0.45
2
3
4
G1
0.98
Input
Flange g6
6.50
k1
5.9056C
Feet on request
B1 0.59 0.354.923.352.28B1 2.56 -
7.27Lbs. With Flange
Input
Flange A g6
5.77 6.556C
C max
7.19
4.33
2.36
2.99
1.97
-
-
0.73
2.91
2.26
2.50 - 1.75
L L1 LQ
3.43 1.97 1.63
5.16
2.91
4.02
5.12
4.13
5.20
3.508.13
TS
4.215.12
4.33
3.58
4.13
7.12
R
4.33
e1
5.12
6.50
4.53
Input
Flange A
5.77
g6
6.5056C5.07
3.30 1.77
0.14
ø2.95
3.4
1
1.6
1
0.625*
ø2.3
6
1/4-20x0.62
Nr°4 - M8x0.55
Other competitive interchange / transition bases are available.
* For other options see page 49
g6
0.625*
1/4-20x0.620.98
0.71
3/1
6
g6
0.6
25*
0.71
3/1
6
A
1.95
1.57
1/4-20x0.62
0.625*
1.44
a1
c1
f1
b1
e1
s1
k1
0.625*
1/4-20x0.62
1.6
13.4
1
5.00
1.57
LG
OH
LQ
T
0.625*
ø2.3
6
1/4-20x0.62
Cm
ax.g6
4.63
L1
5.07
3.30 1.77
0.14Nr°4 - M8x0.55
ø2.95
90°
H1
ø1R
S
#
Motorized Feet Mount
Motorized Output Flange Mount
Motorized Base Mount
S2
D. Brown M0320/30 - B. Hansen SFN02 - MNord Sk172 - otovario A 32/3Also interchangeablewith
1
2
2
1
#
www.renold.com
27
302A
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
1140 RPM Input
2.84 4.28409
2.23 5.45321
589 2.73 6.23281
589 2.36 7.20243
673 2.51 7.74226
799 2.34 9.85178
967 2.45 11.42153
959 2.13 13.03134
959 1.83 15.10116
852 1.52 16.20108
852 1.31 18.7893
959 1.31 21.1583
1001 1.32 21.8480
852 0.94 26.3167
959 0.96 28.8861
852 0.69 35.9149
858 0.66 37.6946
852 0.53 46.8737
0.49 49.7635
0.32 49.76
420 3.53 3.44509
0.26 61.89
0.40 61.8928
420
420
849
852
849
852
Output Shaft ( ” )
Standard
0.750
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
Optional
Available Motor
Flanges
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.625
With Motor Shaft Reduction Bushing
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
0.750 0.625
1750 RPM Input
Lb.in. 1064 Output shaft Diameter 0.750”
1.0 Service Factor Aluminum Case
23
18
www.renold.com
28
LL
TT
11
1/4-20x0.71
0.750*
k11.44
a1
c1
f1
b1
0.750*
1/4-20x0.62
Competitive
Reference
Feet
code:
S2 With
motor flange
5.07
3.30 1.77
0.14
ø2.95
3.4
1
0.750*
1/4-20x0.711.57
Lenze Type 03
Lenze Type 04
Bonfiglioli 112-(102)
0.59 0.35
0.20 0.35
0.20 0.35
4.55
5.87
6.50
2.95
2.56
3.15
2.28
2.06
2.08
S1
L3
L4
2.18
4.37
3.72
OH1HG G1 ø1
Bonfiglioli 112-(102) B1 0.59 0.354.923.352.28 3.09
4.33
2.36
2.99
1.97
-
-
1.10
3.29
2.64
L L1 LQ
3.43 1.97 2.01
5.16
2.91
4.02
5.12
4.13
5.20
TS
4.215.12
4.33
3.58
4.13
R
4.33
D. Brown M0320/30 - B. Hansen SFN02 -Nord Sk172 - Motovario A 32/3Also interchangeable with
Sew R17 - Old R32 0.3 56C-143/5T
0.1 56C-143/5T
0.7 56C-143/5T
8.37Lbs. With Flange
8.37Lbs. With Feet
Output Flange
Options:
Output
flange code
Option 1
Option 2
Option 3
e1
1.6
13.4
1
0.35
0.43
0.350.45
0.14
0.14
0.12
4.33
5.12
3.74
6.30
7.87
5.51
0.45
0.45
Input
Flange g6
6.50
k1
6.46
s1
s1c1 f1b1a1
2
3
456C
143/5T
302A
Feet on request
G1
1.57
5.07
3.30 1.77
0.14Nr°4 - M8x0.55
90°
H1
1.57
OH
ø1R
S
0.750*
ø2.3
6
1/4-20x0.62
5.14
ø2.95
Input
Flange A Cmax g6
6.32 7.19 6.5056C143/5T
0.84
3/1
6
A
1.95
1.57
1.6
1
0.750*
ø2.3
6
1/4-20x0.62
0.84
3/1
6
5.59
5.12
6.50
4.53
e1
* For other options see page 49
Nr°4 - M8x0.551.02
Nr°4 M08x063
2.38
2.7
6
A
6.28
g6
6.50
Input
Flange
56C143/5T
0.8
75*
G
Cm
ax.g6
L
#
1
S2
Motorized Output Flange Mount
Motorized Feet Mount
Motorized Base Mount
Other competitive interchange / transition bases are available.#
1
LQ
B2 0.20 0.435.713.942.28 2.22 4.23 2.36 - -6.105.12
www.renold.com
29
1750 RPM Input1.0 Service Factor Aluminum Case
Lb.in. 1330
1750 RPM Input1.0 Service Factor Aluminum Case
Lb.in. 1330
Output shaft Diameter 1.00”
Output shaft Diameter 1.00”
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
402A
687 5.64 3.52498
Output Shaft ( ” )
Standard
773 5.12 4.37401
859 4.46 5.56315
816 3.71 6.36275
1030
3.77
7.33239
1030
3.70
7.89222
1288
3.70
10.06174
1494
2.99
11.66150
1374
2.61
13.26132
1236
2.58
13.68128
1374
1.93
15.37114
1099
2.20
16.20106
1374
1.66
18.0497
1099
1.84
18.8092
1374
1.86
21.5481
1434
1.19
22.2979
1099
1.35
26.3065
1374
0.87
29.4060
1374
0.67
38.3746
1099
0.65
46.8637
1133
0.50
50.6735
1099 61.8828
1099
1.03
35.9148
4.06
1.00 0.750
Output
Torque
(Ib-in)
Input
HP
RatioOutput
Speed
(RPM)
403A
1099 0.14 216.308
Output Shaft ( ” )
Standard
1374 0.22 177.099.9
1099 0.19 165.7010.4
1374 0.29 135.6913
1374
0.43
126.4014
1545
0.41
102.8917
1374
0.36
96.8518
1099
0.42
86.6620
1502 0.59
74.7723
1374 0.56
73.4324
1099 0.50
70.9525
1374 0.65
61.9028
1099 0.59
61.2229
1374 0.78
53.3632
1279 0.85
50.6435
1502 1.13
43.6940
38.4046
0.31
-
1099
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.00 0.750
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
-
Optional
Optional
Available Motor
Flanges
Available Motor
Flanges
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
-
With Motor Shaft Reduction Bushing
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
www.renold.com
30
1.46 1.79 1.28
2.3
6
Nr°6 M10x071
0.7
50*
0.6
25*
402A
403A
14.65Lbs. With Flange 403A
13.11Lbs. With Flange 402A
15.42Lbs. With Feet 403A
14.10Lbs. With Feet 402A
Output Flange
Options:
Output
flange code
Option 1
Option 2
Option 3
0.35
0.43
0.350.39
0.14
0.14
0.12
4.33
5.12
3.74
6.30
7.87
5.51
0.39
0.43
s1c1 f1b1a1
2
3
4
- --
- --
- --
--
--
S2
D.Brown M0420/30 - Dodge Quantis Hb38 - Falk 04UC - Flender Dz38 - Grove 2042/3 - Motovario 032/3Nord SK272/3-373/3 - B.Hansen SFN14 -
D.Brown M0320/30 - Nord SK 172 - B.Hansen SFN02 - Motovario A32/3
B.Hansen 1
2.95
2.68
2.68
2.68
1.58
2.48
2.60
2.95
2.62
2.95
2.61
3.67
4.58
3.77
2.60
5.21
4.54
4.38
5.70
4.19
1.36
2.39
3.45
4.35
3.55
4.98
4.31
4.16
5.48
3.96
3.15
3.54
2.95
3.35
3.94
3.15
3.94
3.15
3.15
3.94
6.38
6.77
6.10
6.57
7.17
6.38
7.17
6.38
6.38
7.17
0.24
0.79
0.59
0.59
0.67
0.20
0.24
0.59
0.24
0.24
0.47
0.35
0.35
0.35
0.43
0.39
0.47
0.35
0.39
0.47
1.97
1.97
2.36
S2 with motorflange 56C-140TC
402A
0.03 0.17
Feet
code: OH1HG L1G1402A
ø1
S1
L4
L5
B1
B2
E1
J1
J2
M1
403A
G1
403A
Browning CbN21
Sew R17-old R32
Sew R27-R37-R40
Sumitomo 4075-85G
Sumitomo 4090-95G
Motovario A 042/3
Competitive
Reference
Also interchangeablewith
Bonfiglioli C212/3
Bonfiglioli C112
Lenze Type 05
Lenze Type 04
0.12
1.0
0*
5/16-18x0.83
a1
b1
f1
1.85 c1
5.0
0
1.8
1 e1
k1
s1
L1
2.42
1.975/16-18x0.83
ø2.6
0
H
O
G L LQ
Øg6
Cm
ax.
S2
X
G1
B1
T
H1
R
S
ø1
6.306.53
402A
403A 8.56C max.
8.42C max.
X =0.27402A
X =0.13403A
56C403A
143/5TC402A
k1
g6
7.87
6.5
402A 403A
Input
Flange
8.28
6.5
- --
- --
- --
- --
1.0
0*
5.12
6.50
4.53
e1
6.50
5.12
4.33
3.43
4.23
2.99
3.54
3.35
2.36
3.54
0.81
1.83
2.90
3.80
2.99
4.43
3.76
3.60
4.92
3.41
1.22
2.25
3.31
4.21
3.41
4.84
4.18
4.02
5.34
3.82
L403A
LQ 56C-140TC
402A
6.50
5.71
5.71
5.12
6.10
5.20
5.91
5.71
6.30
6.89
7.56
6.02
5.51
4.92
5.35
4.88
4.72
5.08
4.92
4.52
TS
4.33
4.33
4.33
4.33
5.12
4.13
4.92
4.53
4.72
5.91
R
X =0.27402A
X =0.13403A
50°
65°
5.0
0
ø3.15
2.735 2.735Nr°5 M08x071
ø0.31
5.47
Input
Flange
56C
143/5T
A402A g6
A403A
- 7.67
7.26 -
6.5
6.5
6.74 6.91
B402A
B403A
1.97 1.57
B1402A
B1403A
1/4 3/16
A
2.42
1.975/16-18x0.83
1.0
0*
ø2.6
0
1.1
1
B
X
B1 1/4-20x0.71
0.8
4071
402A
403A
g6
0.8
75*
0.6
25*
402A
403A
* For other options see page 49
Detail Y
Y
402A 143TC
403A 56C
#
1
2
3
Motorized Feet Mount
Motorized Output Flange Mount
Motorized Base Mount
Other competitive interchange / transition bases are available.#
1
2
3
www.renold.com
31
1140 RPM Input
2655 1.02 49.00
1328 10.63 3.61485
2111 0.65 60.9
1505 10.28 4.23414
1770 10.21 5.01349
2213 10.53 6.07288
2452 10.42 6.81257
2111 1.00 60.9029
2655 1.57 49.0036
2111 1.38 44.2240
2567 1.83 40.5043
2655 2.16 35.5849
2691 2.64 29.4160
2111 2.44 24.9870
2655 3.82 20.1087
2691 4.68 16.62105
2111 4.29 14.21123
2655 6.71 11.43153
2691 8.23 9.45185
2655 9.64 7.96220
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Standard
1.250 -
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
Optional
Available Motor
Flanges
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
143-5TC182-4TC 56C
452A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
With Motor Shaft Reduction Bushing
23
19
1750 RPM Input1.0 Service Factor Aluminum Case
Lb.in. 2660 Output shaft Diameter 1.250”
www.renold.com
32
S2
1
2
#
Motorized Output Flange Mount
Motorized Base Mount
Motorized Feet Mount
60°
7.36
4.35 3.01
0.16
L1
Nr°5 - M10x0.71
452A
Input
Flange g6 k1
143/5T 6.50 8.04182/4T 8.88 8.75
0.24 0.555.98 8.666.463.942.87 1.35 0.50 182/4TB. Hansen 2 E2
Also interchangeablewith
D.Brown M0620/30 - Dodge Quantis Hb48 - Falk 06UC - Flender D40 - Grove 2062 -Nord SK 472/3 - B.Hansen SFN24 - Motovario 042/3
Browing CbN22
Sew R47-old R60
5.59 19.71Lbs. With Feet 452A
Input
Flange A Cmax g6
7.94 8.84 6.5143/5T
8.65 10.03 8.88182/4TT
L
6.50
4.17
5.12
L1
-
-
2.76
3.94
3.54
-
-
LQ
143/5 182/4
-
2.11
1.17
2.35
2.74
0.26
3.02
2.11
2.82
3.41
7.56 - --
R
5.31
6.30
6.30
5.31-5.91
5.91
5.31
60
°
Input
Flange A g6
143/5T 7.94 6.5182/4T 8.65 8.88
g6
7.36
4.35 3.01
0.16
Nr°5 - M10x0.71
ø4.84
5.1
8
0.875*
1/4-20x0.711.97
0.96
1/4
A
1.37
7.45
0.8
75*
2.97
2.36
2.7
4
1.250*
ø4.1
7
5/16-18x0.82
1/4
* For other options see page 49
3.0
7
4.8
8
2.48 3.27
e1
8.46
6.50
19.16Lbs. With Flange 452A
Feet
code:O
S2 With
motor flange
Lenze Type 06
Bonfiglioli C312/3
0.94 0.53
0.31 0.55
B3 0.79 0.43
H1
6.57
6.97
6.38
T
7.76
6.83
6.14
S
6.69
8.07
7.48
H
4.53
4.92
4.33
G
3.54
3.11
3.07
S4
L6
G1
1.74
4.50
3.59
Motovario A52/3
Sumitomo 4100/05G
0.71 0.43
0.31 0.55
6.38
5.98
5.51
6.54
7.48
7.09
4.33
3.94
3.54
3.35
M2
J3
4.30
4.89 0.50 182/4T
0.11 182/4T
ø1Competitive
Reference
Output Flange
Options:
Output
flange code
Option 1
Option 2
4
5
s1
0.55
0.43
c1
0.43
f1
0.16
0.18
b1
7.09
5.12
a1
9.84
7.87
0.61
G1
1.97
H1
2.97
2.36
LG
OH
LQ
Ø1R
S
ø4.1
7
5/16-18x0.82
Cm
ax.g6
1.250*ø4.84
2.26
a1
c1
f1
b1
e1
s1
k1
1.250*
5/16-18x0.82
2.7
45.1
8
Other competitive interchange / transition bases are available.#
1
2
www.renold.com
33
1750 RPM Input
Output shaft Diameter 1.250”
Output shaft Diameter 1.250”
1.0 Service Factor Aluminum Case
Lb.in. 2837
1750 RPM Input1.0 Service Factor Aluminum Case
Lb.in. 2837503A
1288 3.61485
2214 0.13 480.163.64
Standard
1.250 -
2576 6.81257
1459 4.23414
1717 5.01349
2146 6.07288
2214 60.9029
2799 4936
2214 44.2340
2533 40.5043
2799 35.5849
3039 29.4160
2214 24.9870
2799 24.6171
2799 20.1087
3039 16.62105
2214 14.21123
2799 11.43153
2833 7.96220
3039 9.45185
10.31
10.94
9.98
9.90
10.22
1.05
1.65
1.45
1.81
2.27
2.99
2.56
3.29
4.02
5.29
4.50
7.07
10.28
9.29
1.250 -
2799 0.21 386.334.53
3039 0.28 319.325.48
2799 0.28 292.575.98
3039 0.36 241.827.24
2799 0.37 218.268.02
3039 0.49 180.409.70
2799 0.49 165.2910.59
3039 0.64 136.6212.81
2799 0.64 126.6513.82
2799 0.69 117.2214.93
3039 0.84 104.6816.72
2799 0.87 92.7818.86
3039 1.05 83.5920.94
3039 1.15 76.6922.82
2799 1.22 66.2226.43
3039 1.6 54.7331.97
3039 1.86 47.2237.06
3202 2.33 39.7943.98 143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
143-5TC
Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” ) Available Motor
Flanges
182-4TC
Available Motor
Flanges
143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
- 56C
502A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-With Motor Shaft Reduction Bushing
With Motor Shaft Reduction Bushing
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
www.renold.com
34
2.01
4.8
8
3.0
7
Nr°7 M12x0.79
g6
1.1
25*
0.8
75*
502A
503A
0.9
60.8
4502A
503A
0.8
75*
0.7
50*
502A
503A
2.97
2.365/16-18x0,82
8.218.56
502A
503A
ø4.1
7
1.2
50*
H
G L LQ
Øg6
Cm
ax.
S2
H1
8.52
8.33
8.92
7.93
7.93
8.33
O
0.94
0.79
0.31
0.24
0.31
0.71
e1
8.46
6.50
2.48 1.57 1.69
3.74
1/4
1/43/16
502A
503A
A
2.97
2.365/16-18x0.82
1.2
50*
ø4.1
7
1.3
7
B
B1
50° 6.7
3
ø4.84
7.01
3.505 3.505
ø0.39
1/4-20x0.71
N°5 M10x0.71
8.67 9.00
B402A
B403A
1.97 1.97
B1402A
B1403A
56C-143/5
182/4TC
Input
FlangeA
502A g6A
503A
9.13 9.47
9.84 -
6.50
8.88
2.7
4
X =0.21502A
X =0.59503A
65°
* For other options see page 49
X =0.21502A
X =0.59503A27.09Lbs. With Feet 503A
25.99Lbs. With Feet 502A
L1
Also interchangeablewith
D.Brown M0620/30 - Dodge Quantis Hb48 - Falk 06UC - Flender D40 - Grove 2062 -Nord SK 472/3 - B.Hansen SFN24 - Motovario 042/3
Browing CbN22
S2 with motorflange 182/4TC
502A 503A
0.1
1.2
50*
5/16-18x0.82
a1
b1
f1
2.26 c1
6.7
3
2.7
4 e1
G1
B1
T
H1
R
S
ø1
9.05
27.53Lbs. With Flange 503A
25.55Lbs. With Flange 502A
Output Flange
Options:
Output
flange code
Option 1
Option 2
4
5
s1
0.55
0.43
c1
0.43
f1
0.16
0.18
b1
7.09
5.12
a1
9.84
7.87
0.61
C max.
9.43C max.
10.24C max.
k1
s1
56-143/5402A
9.27 9.98
182/4TC402A
6.5 8.88
k1
g6
9.62
6.5
Input
Flange56-143/5
403A
502A 503A
Feet
code:01TL SRHG
G1
502A
G1
503A
Sew R47-old R60 S4
Bonfiglioli C312/3
B. Hansen 2
Motovario A 52/3
Lenze Type 06
Sumitomo 4100-05G
E2
M2
J3
3.54
3.07
3.11
2.87
3.35
3.54
B3
L6
2.96
4.81
5.72
2.57
6.11
5.52
6.50
5.12
4.17
7.56
3.54
3.94
3.29
5.14
6.04
2.89
6.44
5.85
4.53
4.33
4.92
3.94
3.94
3.94
5.31
6.30
6.30
5.31
5.915.315.90
7.76
6.14
6.83
8.66
6.54
5.51
6.69
7.48
8.07
6.46
7.09
7.48
1.46
3.31
4.21
1.06
4.61
4.02
1.79
3.64
4.55
1.40
4.94
4.35
LQLQ - 56C/140TC
502A 503A180TC502A
2.16
4.01
4.92
1.77
5.31
4.72
0.53
0.43
0.55
0.55
0.55
0.43
-
-
-
0.29
0.29
-
-
-
-
-
-
-
Competitive
Reference
X
O
X
1
2
502A 143TC
503A 56C
502A 182TC
#
Detail Y
Y
Motorized Base Mount
Motorized Feet Mount
Motorized Output Flange Mount
Other competitive interchange / transition bases are available.#
1
2
www.renold.com
35
1417 3.61485 1.375 1.250
2919 6.81257
1717 4.23414
2060 5.01349
2318 6.07288
3388 60.9029
3157 49.0036
3388 44.2340
2661 40.5043
4287 35.5849
3775 29.4159
3388 24.9870
4227 24.6171
4287 20.1087
4305 16.62105
3388 14.21123
3434 11.43153
3177 7.96220
3434 9.45185
11.34
12.40
11.74
11.88
11.04
1.61
1.86
2.21
1.90
3.48
3.71
3.92
4.96
6.16
7.49
6.89
8.68
11.53
10.50
603A
3388 363.634.81 1.3750.27
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
5.986.287.24
43.9837.0631.9730.6326.4324.6422.8221.2620.9418.8616.7214.9313.8212.8912.0111.1210.599.448.527.81
4293338837864293
3388
37863388
33883786
429343014293378633884301338842934293430143013726
4293
0.420.35
2.712.632.272.171.871.381.621.191.311.341.191.060.980.810.670.620.750.590.480.550.45
292.57278.62
39.7947.2254.7357.1366.2271.0176.6982.3083.5992.78
104.68117.22126.65135.74145.68157.40165.29185.29205.43224.18241.82
143-5TC143-5TC143-5TC143-5TC
1.3751.3751.3751.3751.375
1.375 1.2501.3751.375
1.3751.375
1.3751.3751.375
1.3751.375
1.3751.3751.3751.3751.3751.3751.3751.375
143-5TC
143-5TC143-5TC
143-5TC143-5TC143-5TC
143-5TC143-5TC
143-5TC143-5TC143-5TC143-5TC143-5TC143-5TC143-5TC143-5TC
143-5TC143-5TC
143-5TC143-5TC
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Available Motor
Flanges
56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-56C-
56C-56C-
56C-56C-
56C-56C-
56C-
182-4TC
Available Motor
Flanges
143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
602A
4293
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.2501.2501.250
1.2501.2501.2501.2501.2501.250
1.250
1.2501.250
1.2501.2501.2501.2501.2501.2501.2501.2501.2501.2501.250
With Motor Shaft Reduction Bushing
With Motor Shaft Reduction Bushing
1750 RPM Input
Lb.in. 4079
1.0 Service Factor Aluminum Case 1750 RPM Input
Output shaft Diameter 1.375”
Output shaft Diameter 1.375”
Lb.in. 4079
1.0 Service Factor Aluminum Case
www.renold.com
36
1/43/16
602A
603A
B1 1/4-20x0.71
0.9
60.8
4602A
603A
0.8
75*
0.7
50*
602A
603A
ø0.39
N°5 M10x0.71
2.7
4
65°
2.48 1.57 1.69
3.742.01
4.8
8
3.0
7
Nr°7 M12x0.79
3.25
2.645/16-18x0.82
8.889.23
602A
603A
ø4.1
7
1.3
75*
O
G LQ
Øg6
Cm
ax.
8.58
9.57
8.98
7.99
8.78
9.17
8.78
8.39
H1
0.94
0.31
0.31
0.24
0.79
0.71
0.31
0.71
O
e1
8.46
6.50
X =0.86602A
X =0.61603A
6.7
9
ø4.84
7.95
3.975 3.975
31.94Lbs. With Flange 603A
31.50Lbs. With Flange 602A
34.80Lbs. With Feet 603A
32.60Lbs. With Feet 602A
Feet
code:
Sew R47-old R60 S4
Motovario A 62/3
Lenze Type 06
3.82
4.02
3.39
3.29
4.02
3.43
Sew R77 S7
B4
L6
M3
Bonfiglioli C412/3
Sumitomo 4110G 3.70J4
B. Hansen 2 E2
Browing CbN22
6.50
8.07
4.17
7.56
4.33
5.89
4.53
3.63
1.86
6.39
3.10
5.60
4.64
5.72
3.97
2.20
6.72
3.44
5.94
4.97
6.06
4.53
5.51
4.92
3.94
4.72
5.12
4.72
5.31
6.69
6.30
5.31
6.697.28
7.09
7.48
1.88
0.11
4.63
1.35
3.85
2.88
3.96
-
-
1.06
-
0.27
-
0.39
2.58
0.81
5.34
2.05
4.55
3.59
4.67
6.69
8.03
8.07
6.46
9.06
8.50
8.86
7.76
10.71
6.83
8.66
5.91
7.30
6.79
0.53
0.55
0.55
0.55
0.55
0.55
0.55
-
-
-
-
-
-
-
-
-
-
-
-
Competitive
Reference
- -
Motovario A 52/3 M2 3.82 6.19 3.946.53 4.33 5.517.484.44 0.86 5.14 0.43 - -
Also interchangeablewith
D.Brown M0620/30-Sew R57-Nord SK 472-572/3-B.Hansen SFN24-Dodge Quantis Hb48-Falk 06UC-Flender D40-Grove 2062-Motovario 042-052/3
01TL SRHGG1
602A
G1
603A
LQLQ - 56C/140TC
602A 603A180TC602A
S2 with motorflange 182/4TC
602A 603A
5.91
Output Flange
Options:
Output
flange code
Option 1
Option 2
4
5
s1
0.55
0.43
c1
0.43
f1
0.16
0.18
b1
7.09
5.12
a1
9.84
7.87
0.61
0.1
1.3
75*
5/16-18x0.82
a1
b1
f1
2.94 c1
6.7
9
2.7
4 e1
k1
s1
602A 603A
G1
B1
T
H1
R
S
56-143/5602A
9.94 10.65
182/4TC602A
6.50 8.88
k1
g6
10.29
6.50
Input
Flange56-143/5
603A
B
50°
9.34 9.67
B602A
B603A
1.97 1.97
B1602A
B1603A
143/5TC
182/4TC
Input
FlangeA
602A g6A
603A
9.83 10.20
10.54 -
6.50
8.88
* For other options see page 49
X =0.86602A
X =0.61603A
10.49C max.
10.24C max.
11.68C max.
L1
g6
1.1
25*
0.8
75*
602A
603A
5/16
A
3.25
2.645/16-18x0.82
1.3
75*
ø4.1
7
1.5
2
X
H
LX
ø1
1
2
#
602A 143TC
603A 56C
602A 182TC
Detail Y
Y
S2
Motorized Feet Mount
Motorized Output Flange Mount
Motorized Base Mount
Other competitive interchange / transition bases are available.#
1
2
www.renold.com
37
402C
1009 5.55315 1.00 0.750
1345 11.64150
1261 7.33239
1275 8.96195
1261 10.04174
1261 50.67
1354 61.8928
1261 50.6735
1354 46.8737
1513 38.3746
1354 35.9149
1648 29.4060
1354 26.3167
1303 22.2679
1648 21.5481
18.7893
1354 16.20108
1513 13.26132
1648 15.37114
5.25
3.34
4.97
4.11
3.63
0.47
0.63
0.72
0.83
1.14
1.09
1.62
1.49
1.69
2.21
2.08
2.42
3.30
3.10
1354 61.890.41
1354
1394 165.7411
1394 86.6620
1640 135.6913
1394 118.2915
1640 96.8518
1471 38.3446
1640 43.6940
50.6435
1640 61.2129
1394 74.7723
1640 70.9525
0.24
0.46
0.35
0.34
0.49
1.11
1.08
0.94
0.77
0.54
0.67
0.750
1640
1.00
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” ) Available Motor
Flanges
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
Available Motor
Flanges
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
1140 RPM Input
With Motor Shaft Reduction Bushing
With Motor Shaft Reduction Bushing
403C
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
1.00 0.750
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
0.7501.00
23
18
1.0 Service Factor Cast Iron Case
Lb.in. 1729
1750 RPM Input
Lb.in. 1729
1.0 Service Factor Cast Iron Case 1750 RPM Input
Output shaft Diameter 1.00”
Output shaft Diameter 1.00”
www.renold.com
38
- N Reducer withput output Flange or Feet
- F Output Flange
Motorized Output Flange Mounted
Modular Reducer Case Only
Motorized Base Mounted
402C
403C
403C
402C
S2
0.8
75*
0.6
25*
402A
403A
4.33
5.71
6.0
2
3.5
4
5/16-18X0.83
0.3
9
1.0
0*
1.97
C
ø0.350.98
2.95 5.12
1.11
1/4
1.0
0*
b1
a1
k1
g6
c11.85
f1
0.12
e1
s1
ø2.6
0
0.45
0.32
ø3.15
5.90
50°
65° ø0.31
6.0
6
3.5
4
N°4 - M8x0.63
403C
22.36Lbs. With Feet 403C
21.37Lbs. With Feet 402C
23.35Lbs. With Flange 403C
22.47Lbs. With Flange 402C
402A403A
1.971.57
e1
5,12
6,50
4,53
* For other options see page 49
1.0
0*
B
0.8
4071
402A
403A
0.7
50*
0.6
25*
402A
403A
Output Flange
Options:
Output
flange code
Option 1
Option 2
Option 3
2
3
4
s1
0,35
0,43
0,35
c1
0,39
f1
0,12
0,14
0,12
b1
4,33
5,12
3,74
a1
6,30
7,87
5,51
0,39
0,43
6.82
6.16
g6
6,5
k1
8,32
g6
6,5
k1
7,46
8.19 7.22 6.79 6.5 -
Input
Flange A B
7.34 6.38
C
6.7956C-143/5TC
g6
6.5
S2
-
Input
Flange
56C-143/5TC
A B C g6 S2
Input
Flange
56C-143/5TC
Input
Flange
56C-143/5TC
For the correct compilation of the order code see pages 20 - 21
3/16
1/4-20x0.71
402C
Feet interchangeable with: S2 ( See page 31)
g6
www.renold.com
39
602C
1417 3.61485 1.375 1.25011.34
414
349
288
257
220
123
185
153
105
87
70
60
49
43
40
36
29
1717
2060
3388
3157
3388
3157
3388
2661
4287
3388
3775
4287
4305
3388
3434
3434
3177
2919
2318
11.73
11.04
1.05
1.21
1.61
1.86
2.21
1.90
3.48
3.71
3.92
6.16
7.49
6.89
8.68
10.50
11.53
12.39
11.89
4.23
5.01
6.07
60.90
49.00
60.90
49.00
44.23
40.50
35.58
29.41
24.98
20.10
16.62
14.21
11.43
9.45
7.96
6.81
1140 RPM Input
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
3388 278.626.3 1.3750.35
7.8
8.6
9.4
10.7
11.1
14
12
13
15
17
19
20.9
21.2
23
25
26
31
37
32
4293
3388
4301
4293
3388
4301
3388
4293
3786
4301
4293
3786
3388
4293
3786
0.55
0.59
2.63
2.27
2.17
1.87
1.38
1.62
1.19
1.31
1.34
1.19
1.06
0.98
0.81
0.67
0.62
0.76
0.48
224.18
204.12
185.29
47.22
54.73
57.13
66.22
71.01
76.69
82.30
83.59
92.78
104.68
117.22
126.65
135.74
145.68
157.40
164.23
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
44 3726 2.71 39.79 1.375 1.250
3388
4293
4293
4301
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
Standard Optional
Output
Torque
(Ib-in)
Input
HPRatio
Output
Speed
(RPM)
Output Shaft ( ” )
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
143-5TC 56C-
Available Motor
Flanges
182-4TC
Available Motor
Flanges
143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56C
182-4TC 143-5TC 56CWith Motor Shaft Reduction Bushing
603C
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
19
23
Lb.in. 4079
1.0 Service Factor Cast Iron Case 1750 RPM Input
Output shaft Diameter 1.375”
Output shaft Diameter 1.375”
Lb.in. 4079
1.0 Service Factor Cast Iron Case 1750 RPM Input
www.renold.com
40
Input shaft
1.3
75*
b1
a1
k1
g6
0.5
1
c12.66
f1
0.10
e1
s1
ø4.84
7.48
50°
65° ø0.39
7.6
0
4.5
2
N°4 - M10x0.71
5.31
7.48
7.6
0
4.5
3
9.33
7.87
4.0
2
0.31
ø4.1
7
0.61
0.47
1.3
75*
3/8-16x0.88
0,5
1
1.3
75
*
2.64
B
ø0.531.18
3.94 6.50
1.52
5/1
6
C
S2
g6
1.1
25*
0.8
75*
602A
603A
1.971/4-20x0.71
1/43/16
602A
603A0.9
60.8
4602A
603A
0.8
75*
0.7
50*
602A
603A
Output Flange
Options:
Output
flange code
Option 1
Option 2
2
3
s1
0.55
0.43
c1
0.51
f1
0.16
0.18
b1
7.09
5.12
a1
9.84
7.87
0.61
For the correct compilation of the order code see pages 20 - 21
602C
Feet interchangeable with: S4 ( See page 35)
10.18 9.21 7.27 6.50 -
Input
Flange A B
9.83 8.87
C
7.2756C-143/5TC
g6
6.50
S2
-
Input
Flange
56C-143/5TC
A B C g6 S2
10.54 8.87 8.46182/4TC 8.88 -
g6
6,50
k1
10.69
g6
6,50
k1
10.38
Input
Flange
56C-143/5TC
Input
Flange
56C-143/5TC
8.88 11.09182/4TC
603C
48.90Lbs. With Feet 603C
49.34Lbs. With Feet 602C
53.52Lbs. With Feet 603C
48.90Lbs. With Feet 602C
e1
8.46
6.50
- N Reducer withput output Flange or Feet
Modular Reducer Case Only
- F Output Flange
Motorized Base Mounted
Motorized Flange Mounted
Type 603C
602C
603C
602C
603C
www.renold.com
41
A service factor is selected to adjust a reducer’s load carrying characteristics to reflect the application load requirements.
The efficiency of an inline helical speed reducer is dependent on input speed, quality of gearing, type of lubricant, ambienttemperature and many other variables. The efficiency for a speed reducer can be easily calculated as follows.
An overhung load exists when a force is applied at right angle to shaft’s outermost bearing.Pulleys, sheaves and sprockets will cause an overhung load when used as a power take-off. The amount of overhungload will vary, depending on the type of power take-off used and its mounting location on the shaft. The catalogoverhung load ratings listed below and in selection tables are calculated at the centerline of the shaft.
Overhung load ratings are listed for each reducer size and should not be exceeded. If the basic reducer is selected usinga service factor, that factor must also be used in the equations below.
Output Shaft OHL =
126000 x Input HP x Overhung Load Factor x EfficiencyPitch Diameter ( Of sprocket, pulley or sheave ) x Output RPM
Input Shaft OHL =
126000 x Input HP x Overhung Load FactorPitch Diameter ( Of sprocket, pulley or sheave ) x Input RPM
SprocketGear PinionV-Belt Sheave or PulleyFlat Belt
1.001.251.502.50
NOTE: The overhung load capacities in the catalog are calculated at centerline of shaft extension with no thrust load
OVERHUNG LOAD ATCENTER OF SHAFTEXTENSION
Torque as it is related to gear reducers is defined as a twisting motion resulting in rotational movement. Horsepower isa measure of the rate of doing work, and depends on speed of rotation and the ratio.
HP = TQ x Speed ( RPM )63025
TQ = HP x 63025RPM
Reducer Service Factor = Reducer HP RatingMotor HP Rating
Efficiency = Output HPInput HP
Average efficiency of double reduction inline reducers: 96%triple reduction inline reducers: 93%
General Technical Information
Overhung Loads and Thrust Load
Overhung Loads Factors
Torque and Horsepower
Service Factor
Efficiency
www.renold.com
42
311A 411A 511A
18.87
22.47
25.84
28.31
35.95
32.80
94.36
112.33
130.31
141.54
179.74
164.01
40.89
44.93
51.67
56.17
71.89
65.15
204.45
224.67
258.37
280.84
359.47
325.77
66.05
71.89
83.13
89.87
114.58
103.35
330.26
359.47
415.64
449.34
572.91
516.74
FR1.61
X+0.83FR
1.81X+0.83
FR1.88
X+0.90
311A 411A 511A
1400
900
31.45
35.95
157.27
179.74
53.92
62.91
269.60
314.54
89.87
98.85
449.34
494.27
Feq
X
= =
Feq
X
= =
Input shaft
402C-403C 602C-603Cn[min ]
2-1
300
250
200
140
85
120
89.87
98.85
105.59
121.32
152.78
132.56
449.34
494.27
527.97
606.61
763.88
651.54
130.31
139.30
148.28
170.75
215.68
179.74
651.54
696.48
741.41
853.74
1078.41
898.68
Feq= FR1.81
X+0.83FR
2.38X+1.01
Feq
X
= =
70
15
40
170.75
193.22
193.22
853.74
966.08
966.08
224.67
326.22
269.6
1123.35
1631.1
1348
* Higher capacity bearings available on request.
* Higher capacity bearings available on request.
RPM
700
600
400
300
140
200
Feq=
202A 302A 402A
300
250
200
31.45
35.95
42.69
157.27
179.74
213.44
50.78
59.31
72.34
253.88
296.56
361.72
53.92
62.91
76.39
269.6
314.54
381.94
452A502A
89.87
98.85
98.85
449.34
494.27
494.27
602A
101.1
112.33
134.8
505.51
561.67
674.01
* Higher capacity
bearings
available
on request.
RPM
RPMRPM
300
250
200
140
85
120
31.45
33.93
41.56
55.27
67.40
60.66
157.27
169.85
207.59
296.56
337
303.30
69.65
74.14
80.88
91.22
107.84
100.65
348.24
370.7
404.41
456.08
539.21
503.26
93.24
96.61
105.59
121.32
141.54
125.81
465.07
485.29
525.73
606.71
707.71
626.83
Feq= FR1.52
X+0.73
70 76.39 381.94 121.32 606.61 157.27 788.59
40 85.37 426.87 134.8 674.01 181.88 909.91
15 134.8 674.01 202.2 1011
FR1.81
X+0.83FR
2.01X+0.83
103.35
107.84
116.83
134.8
157.27
139.3
516.74
539.21
584.14
674.01
786.34
696.48
175.24 876.21
202.2 1011
224.67 1123.3
125.81
134.8
143.79
166.26
188.72
170.75
629.07
674.01
718.94
831.28
898.68
853.74
199.96 943.61
260.62 1303.1
292.07 1460.3
202A-302A 402/3A 452A 502/3A 602/3A
- -
FR2.13
X+0.94FR
2.38X+1.01
403A 503A 603A
300
250
200
31.45
35.95
42.69
157.27
179.74
213.44
53.92
62.91
69.65
269.6
314.54
381.94
89.87
98.85
98.85
449.34
494.27
494.27
RPM
300
250
200
RPM
402C 403C
53.92
62.91
76.39
269.6
314.54
381.94
602C 603C
101.1
112.33
134.8
505.51
561.67
674.01
89.87
98.85
98.85
449.34
494.27
494.27
53.92
62.91
76.39
269.6
314.54
381.94
FA
[Lb]
FR
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FR
[Lb]
FA
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
FA
[Lb]
FR
[Lb]
CAST-IRON Radial and Axial LoadsTWO or TREE STAGES
ALUMINUM Radial and Axial LoadsONE STAGE
ALUMINUM Radial and Axial LoadsTWO or TREE STAGES
Output shaft
FR
FA
Output shaft
FR
FA
Output shaft
FR
FA
Input shaft
FR
FA
FR
FA
Input shaft
FR
FA
www.renold.com
43
All thepositions
B6 - B7
B56 - B57
B8
B58
V5
V1
V6
V3
311A 302A 452A202A
B3 Standard
B5 Standard
B6 - B7
B56 - B57
B8
B58
V5
V1
V6
V3
B3 Standard
B5 Standard
3.53 3.53 8.82
ReducerSize:
5.29 5.29 10.93
Quality Oilseals
Bearing ( Double Sealed )
Aluminum reducer Types 202A-302A-311A-411A-511A and 452A are supplied complete with synthetic oil that is satisfactory forthe life of the reducer in most applications. . The oil of these reducerscan only be changed by removing the inspection cover. Oil can be removed or changed only by opening the upper cover.
The quantity of oil is satisfactory for all mounting positions
Bearing ( Double Sealed )
Quality Oilseals
Type 311A - 411A - 511A Mounting Position
Oil Capacities for All Mounting Positions in Ounces
Type 202A - 302A - 452A Mounting Position
Lubrication 311A - 411A - 511A - 202A - 302A - 452A
411A 511A
www.renold.com
44
B6
B6
B7
B7
B8
B8
V5
V1
V6
V3
B3 Standard
B5 Standard
OIL
QU
AN
TIT
Y(
Ounce
s)
OIL
QU
AN
TIT
Y(
Ounce
s)B3-B5 B6-B56 B7-B57 B8-B58 V5-V1 V6-V3TYPE
402A
502A
602A
B3-B5 B6-B56 B7-B57 B8-B58 V5-V1 V6-V3TYPE
403A
503A
603A
COMPLETE WITH MINERALOIL LUBRICANT
COMPLETO DI OLIOLUBRIFICANTE MINERALE
AT
TEN
TIO
N
AT
TEN
TIO
N
Lubrication 402A-403A-502A-503A-602A-603A
These Aluminum reducers are supplied complete with synthetic oil satisfactory for the life of the reducer in mostapplications. . If the reducer is mounted in adifferent position, . Upon request reducerscan be supplied from the factory with the proper oil fill for the other mounting positions noted below.With synthetic oil, no breather type drain is required.
The quantity is suitable for mounting positions B3 and B5
Mounting Position
Bearing ( Double Sealed ) Bearing ( Double Sealed )
Quality OilsealsQuality Oilseals
ON REQUEST reducers can be supplied with mineral oil. The standard mineral oil lubricant is ISO VG CLP (CC). When
mineral oil is used, and premature wear of the oil
seals.
a breather type drain must be used to prevent excessive housing pressure
Bearing ( Double Sealed ) Bearing ( Double Sealed )
Quality OilsealsQuality Oilseals
LUBRICATED FOR LIFE WITHSYNTHETIC OIL. THIS
REDUCER CAN BE OPERATEDWITH ALL OIL PLUGS.
AT
TEN
TIO
N
LU
BR
ICA
TIO
N
Additionally, specialized lubricants are available for other environments. See page 47 for a listing if in doubt as to the correct
lubricant.
8.82
15.87
19.40
10.58
19.40
29.98
14.11
35.27
37.04
14.11
38.80
42.33
14.11
38.80
42.33
17.64
40.56
44.09
10.58
26.46
26.79
12.35
26.46
31.75
15.87
37.04
40.56
15.87
40.56
44.09
15.87
42.33
45.86
19.40
42.33
47.62
the quantity of oil must be corrected using the chart below
AT
TEN
TIO
N
Standard
Two Stages
Standard
Three Stages
www.renold.com
45
Lubrication 402C-403C-602C-603C
Type / Position
OIL
QU
AN
TIT
Y(
Ounce
s)
B3
B5
B6
B6
B7
B7
B8
B8
V5
V1
V6
V3
B3 / B5 B6 B7 B8 V5 / V1 V6 / V3
402C
403C
602C
603C
17.64
19.40
35.27
45.86
17.64
19.40
52.91
52.91
22.93
24.69
70.55
74.08
29.98
31.75
70.55
70.55
17.64
19.40
52.91
52.91
17.64
19.40
52.91
52.91
Bearing ( Double Sealed ) Bearing ( Double Sealed )
Quality OilsealsQuality Oilseals
Bearing ( Double Sealed ) Bearing ( Double Sealed )
Quality OilsealsQuality Oilseals
Additionally, specialized lubricants are available for other environments. See page 47 for a listing if in doubt as to the correct
lubricant.
Mounting Position
COMPLETE WITH MINERALOIL LUBRICANT
COMPLETO DI OLIOLUBRIFICANTE MINERALE
AT
TEN
TIO
N
AT
TEN
TIO
N
LUBRICATED FOR LIFE WITHSYNTHETIC OIL. THIS
REDUCER CAN BE OPERATEDWITH ALL OIL PLUGS.
AT
TEN
TIO
N
AT
TEN
TIO
N
These Cast Iron reducers are supplied complete with synthetic oil satisfactory for the life of the reducer in mostapplications. . If the reducer is mounted in adifferent position, . Upon request reducerscan be supplied from the factory with the proper oil fill for the other mounting positions noted below.With synthetic oil, no breather type drain is required.
The quantity is suitable for mounting positions B3 and B5the quantity of oil must be corrected using the chart below
ON REQUEST reducers can be supplied with mineral oil. The standard mineral oil lubricant is ISO VG CLP (CC). When
mineral oil is used, and premature wear of the oil
seals.
a breather type drain must be used to prevent excessive housing pressure
www.renold.com
46
VG 460
VG 320
VG 220
VG 32
VG 150
CLP HC
Start-Up - Verify that the installed mounting position is the same as the nametag mounting position.
Lubricant - All reducers are shipped from the factory properly filled with synthetic lubricant.
Maintenance & Oil Specifications -For synthetic oils, the lube should be changed every 20000 service hours or after four
years. In case of extreme operating ( e.g. high humidity, aggressive environment or large temperature variations), shorter intervalsbetween changes are recommended.
Synthetic LubricantReducers can be operated without an openbreather plug.
If mineral oils are required an open breatherplug is required.
-40°F +50°F
Shell
ViscosityISO NLGI
Type
MobilgearSHC 634MobilgearSHC 632
MobilgearSHC 630
MobilgearSHC 629
MobilgearSHC 629
MobilgearSHC 626
MobilgearSHC 624
Omala460 HDOmala320 HD
Omala220 HD
Omala150 HD
Omala150 HD
N / A
N / A
KlubersynthEG 4-460
KlubersynthEG 4-320
KlubersynthEG 4-220
KlubersynthEG 4-150
KlubersynthEG 4-150
N / A
Kluber-SummitHySyn FG-32
InsolubeEP 460InsolubeEP 460
InsolubeEP 220
InsolubeEP 150
InsolubeEP 150
N / A
InsolubeEP 68
N / A
N / A
N / A
N / A
N / A
N / A
N / A
N / A
N / A
N / A
Tribol1510/460
Tribol1510/320
Tribol1510/220
N / A
PAO= Poly Alpha Olefin
-22°F +176°F
-31°F +176°F
+100
+150
+200
-30°F +176°F
-35°F +50°F
VG 100 -35°F +50°F
VG 68 -40°F +50°F
Ambient Temperature
CLP HC
CLP HC
CLP HC
CLP HC
CLP HC
CLP HC
TEXACO
PinnacleEP 220
PinnacleEP 150
PinnacleEP 150
CetusPAO 46
-
-
CLP HC Synthetic Hydrocarbons
Ambient Temperature
20°F to 104°F ( -5°C to 40°C )
Oil Type
Food Grade Oil - Synthetic
20°F to 104°F ( -5°C to 40°C )
5°F to 125°F ( -20°C to 50°C )
-30°F to 140°F ( -35°C to 60°C )
-30°F to 140°F ( -35°C to 60°C )
Food Grade Oil - Synthetic
Fluid Grease
Fluid Grease - Synthetic
Fluid Grease - Synthetic
Manufacturer
Chevron
OilJAX
Mobil
Mobil
Shell
Oil Brand Name
FM ISO 220
Magnaplate 85W140-FG
Mobilux EP023
Mobilith SHC 007
Albida LC
Suggested Standard OilTypical Oils
-
Special Purpose Lubricants
If not, adjust the oil quantity accordingly.
Lubrication
www.renold.com
47
Optional Accessories & Modifications.
Feet on Request for Single Reduction Units
A
D B C
Type A( ” )
B( ” )
C( ” )
2.95 4.33 4.33
2.95 4.33 4.33
311A
411A
3.54 5.12 4.33511A
D( ” )
0.70
0.70
0.98
O
O( ” )
0.35
0.35
0.39
E
F G
E( ” )
4.45
4.45
5.51
F( ” )
5.47
5.47
6.61
G( ” )
5.20
5.20
5.20
Single Reductions Double and Triple Red.
Aluminum
Double and Triple Red.
Cast Iron
Type D1
( ” )
T1
( ” )
L1
( ” )
D1 D1T1
L1
D1
311A0.750 0.84 3/16
0.875 0.96 3/16
0.625 0.71 3/16411A
0.875 0.96 3/16
- - -
- - -511A
Type D1
( ” )
T1
( ” )
L1
( ” )
0.750 0.84 3/16
0.625 0.71 3/16
202A
302A
0.750 0.84 3/16402/3A
- - -452A
- - -502/3A
1.250 1.37 1/4602/3A
Type D1
( ” )
T1
( ” )
L1
( ” )
402/3A 0.750 0.84 3/16
602/3A 1.250 1.37 1/4
Output Shaft on Request
On Request402A - 403A
502A - 503A
602A - 603A
402C - 403C
602C - 603C
For TypeOn Request
Cylindrical roller bearings on the output shaft
202A - 302A - 452A
For Type
D25
35
| 16 | 19 | 20 | 24
| 30 | 38 | 40
Diameter (mm)
402/3C
602/3C
For Type
D
Diameter (mm)
25
30
35
| 16 | 19 | 20 | 24
| 28 | 35
| 30 | 38 | 40
Diameter (mm)
14 16
20
30
| | 20 | 25
| 14 | 16 | 25
| 28 | 35
Metric Output ShaftFor Type
402/3A
502/3A
602/3A
For Type
202A
302A
452A
www.renold.com
48
Single Reductions Double and Triple Reductions
Aluminum
Double and Triple Reductions
Cast Iron
Optional Output / Input Shafts
1/81
- - -
Type D2
( ” )
T2
( ” )
L2
( ” )
311A
0.625 0.71 3/16
D3
( ” )
-
411A
0.750 0.84 3/16
5/8
511A5/8
- - -
1/81
202A - - -
Type D2
( ” )
T2
( ” )
L2
( ” )
D3
( ” )
-
302A 0.625 0.71 3/16 5/8
502/3A0.750 0.84 3/16 5/8
- - -
402/3A
452A 0.750 0.84 3/16 5/8
0.625 0.71 3/16 5/8
1/81602/3A
0.750 0.84 3/16 5/8
- - -
Type D2
( ” )
T2
( ” )
L2
( ” )
D3
( ” )
402/3C 0.625 0.71 3/16 5/8
1/81602/3C
0.750 0.84 3/16 5/8
- - -
D3
T2
L2
D2
D3
T2
L2
D2
D3
T2
L2
D2
78/
18/
11
8/1
58/
78/
58/
Code
BRU56143
BRU143182
BRU56182
Input Shaft Bushings for Nema Electric Motors
143/5TC
182/4TC
182/4TC
Type
56C
143/5TC
56C
Input Shaft on request
Type “R”
Input Bores on request
=
On Request
+
Base Closing Cover
202A - 302A - 452A
For Type
www.renold.com
49
Input Bore / Flange for IEC Motors ( Metric )
IEC Metric Motor Input Flanges
FLA
NG
E
BO
RE
ø1ø2
ø 1 ( ’’ )
ø 2 ( ’’ )
IECFlange 63 B5
5.51
0.43
71 B5
6.30
0.55
80 B5
7.87
0.75
90 B5
7.87
0.94
100/112B5
9.84
1.10
56 B14
3.15
0.35
63 B14
3.54
0.43
71 B14
4.13
0.55
80 B14
4.72
0.75
90 B14
5.51
0.94
100/112B14
6.30
1.10
Type 63 B5 71 B5 80 B5 90 B5100/112
B5 56 B14 63 B14 71 B14 80 B14 90 B14100/112
B14
202A302A402A403A452A502A
602C403C402C603A602A503A
603C
Oil Levels Plugs for 402A÷603C
For applications requiring mineral oils, gearboxes can be delivered with oil plugs ( level and leak ) as represented in figure 2, for the oil quantity,see pages 45 - 46
Breather Plug
Oil Level
Drain Plug
0 1 2 3
B6
B6
B7
B7
B8
B8
V5
V1
V6
V3
B3 Standard
B5 Standard
D
EB
C
A 2
X
X
X2 In some sizes
the drain plugX is missing,use otherdrain toservice thereducer.
X
Positions
A
B
C
D
E
B3 / B5 B6 B7 B8 V5 / V1 V6 / V3
1
2 (3)
0
1
1
2 (3)
0
1
1
1
1
0
1
1
1
1
1
0
1
2 (3)
1
0
1
4+2 (3)
1
1
1
0
1
1
Open With ValveOpen With Valve 4
www.renold.com
50
Core and surface
hardening
Surface hardness:58/60 HRC
Surface hardness dept0.3 / 0.5 mm
Bearings
Oil change after 20,000 hr. ( if synthetic )Oil change after 10,000 hr. ( if mineral )Oil seals inspect change 5,000 hr.Screws check after 2,000 hr. ( for Motor Flange )Shafts bearings play 3,000 hr.Dispose of used lubricant in accordance with applicable laws and regulations.Operate the equipment as it was designed to be operated.Do not overload.Run at correct speed.
Method of calculation:AISI / AGMA 2001-B88Gears
Tolerance DIN 3967
MACHININGPrecision class: DIN 6/7
First pinionground
Excluded Z7-Z9
Slow pinionnormal
First wheelGround
Slow wheelGrounded
Open typeOr sealed
2RSFor vertical mounting.
BRAND USED:KOYOKBCNTNNSK
Higt speed
Q.ty Oil seals
Input shaftCORTECO / CORCOS from
Freudenberg (Germany)70 Shore
NITRILE OUTPUTOil seals
Output shaftSIDAT / N.O.K.
(JAPAN)72 Shore
On request VITON seals forhigh temperature.
OUTPUT
Mat.: 39NiCrMo3DIN: 36NiCrMo4AISI/SAE: 9840
INPUT
Mat.: 39NiCrMo3DIN: 36NiCrMo4AISI/SAE: 9840
ALUMINIUM:
GD-Al Si12 Cu2 FeDIN 226A
SAE 384.2/383
CAST IRON:
G20UNI-ISO 185
DIN 1691ASTM A159-70
Hydro-Mecgraphite gasketOn the housing
AREXONS S6A4Pon the slow wheel;
AREXONS S6A4Pon the first pinion;
Hydro-Mec graphitegasket on the cover
High resistanceZinc-platedClass 8.8
Gears Oil seals Shafts Housings Gaskets Screws
Slow speedURB
( From KOYO )
Our company will not be responsible for any direct or indirect damages, caused by improper
application or for not observing the catalog specifications.
Maintain lubricant in good condition and at proper level. Apply proper maintenance to attached equipment atprescribed intervals recommended by the manufacturer.
Mat.: 16 Mn Cr5DIN: 16Mn Cr5
AISI/SAE (5115)
Maintenance Check List
Technical Information
www.renold.com
51
Two pole motors can be used only for veryintermittent applications. If two pole motorsare used specify on the order.
Do not change mounting positions withoutcontacting Renold. Altering the mountingposition may require special lubricationprovisions which must be factory installed.When reducers are mounted in positionsV5 or V6 and used in continuous dutyapplications, replace the upper bearing with aself lubricated style bearing, and we suggestdouble input seal for V6.
For applications having frequent starts andstops it is advisable to use two oil seals ordouble lip oil seals to avoid premature wearof the oil seals.
If the application subjects the reducer toshock loads and sudden stops it is advisableto use mechanical or eletronic torque limitingdevices.
Reducers are not to be considered fail safe orself-Iocking devices. If these features arerequired, a properly sized, independentholding device should be utilized. Reducersshould not be used as a brake. Any brakesthat are used in conjunction with a reducermust be sized or positioned in such a way soas to not subject the reducer to loadsbeyond the catalog rating.
Specify with the order if a special low noiselevel is required.
Written authorization is required tooperate or use reducers in lifts orpeople moving devices. Check tomake certain application does not exceedthe allowable load capacities published inthe current catalog. Buyer shall be solelyresponsible for determining the adequacyof the product for any and all uses to whichBuyer shall apply the product.
For very heavy radial load, additionaloutput shaft support may be required toprevent premature bearing failure or shaftbreakage from bending fatigue.
PROPER HANDLING OF THE UNITExercise care to prevent damage to the unitwhen moving. Insure that adequate safetymeasures are taken to protect personnelduring transportation. Protect the mountingsurface from damage.
INSPECTION OF UNITThoroughly inspect the equipment for anyshipping and handling damage beforeaccepting shipment from the freight company.
Keep unit in a dry, temperature controlled area.If stored other than said, long term storagemethods must be applied to the unit includingcomplete fill with lubricant. Protect machinedsurfaces and rotate shafts periodically.Prior to putting unit info service, drainlubricant and refill to proper level asdetermined by the mounting position.
Stocking Check List
Selection Check List
TORQUELIMITER
-1
2pn =3600 min1
The application by Buyer shall not be subject to any implied warrantyof fitness for a particular purpose.
V5 V64
3
2
1
8
7
6
5
When installed outdoors, make sure protectionis provided from atmospheric elements.
www.renold.com
52
Installation Check List
When mounting a motor to reducers, thefastening bolts should not be tighteneduntil both the reducer flange and motor faceare in contact. When mounting is completecheck by manually rotating the motor’sshaft to be sure the assembly turns freely.
In applications where multiple starts, stops orreverses occur, it is advisable to use LoctiteCode 270 or similar compounds on thefastening bolts of the output flange and feet.
Mount the reducer on a flat surface free ofvibration. If high overhung loads areexpected, it is advisable to reinforce boltheads with washers as shown in picture.
Make sure there is sufficient space betweenany obstructions and the motor’s air intakearea to provide adequate cooling for the motor.
For very heavy radial load, additionaloutput shaft support may be required toprevent premature bearing failure or shaftbreakage from bending fatigue.
When mounting anything on the reducer’sshaft,protect the bearings from impact byusing the appropriate pullers and threadedholes in the end of the reducer shaft.
Make sure that mounting of pulleys or pinionsdoes not create overhung loads exceedingthe capacity of the reducer.
When mounting items to the reducer shaft,appropriate anti-seize and oxidizercompounds should be used.
If the reducer is to be painted, protectmachined surfaces and oil seals fromover-spray.
The system of connected rotating parts mustbe free from critical speed, torsional or othertype vibration, no matter how induced. Theresponsibility for this system analysis lieswith the purchaser of the speed reducer.
Check shaft and coupling alignment.
For safety, Buyer or User should provideprotective guards over all shaft extensionsand any moving apparatus mountedthereon. The User is responsible forchecking all applicable safety codes in hisarea and providing suitable guards. Failureto do so may result in bodily injury and/ordamage to equipment.
Test run the first unit to verify proper operation.
High speed motors, greater than 1800 rpm,can produce high operating temperatureswithin the reducer and should only be usedfor intermittent duty applications. Decreasethe reducer’s lubricant levels and install abreather plug.
LOCK OUT POWER before any maintenanceis performed. Make absolutely sure that novoltage is applied while work is being doneon the gearbox.
3600
Do not change mounting positions withoutcontacting Renold. Altering the positions mayrequire special lubrication provisions whichmust be factory installed. When reducers aremounted in positions V5 or V6 and used incontinuous duty applications, replace the upperbearing with a self lubricated style bearing,and we suggest double input seal for V6.
www.renold.com
53
Double Reduction Aluminum
Triple Reduction Aluminum
Double Reduction Cast Iron
Triple Reduction Cast Iron
Parts List
Single Reduction
YOU SEEDRAWING UNDER
41a41b
43a
42
80a
51
BEARINGS OIL SEALS
503130 3332 34
311A
411A
511A
Type
Position
Nr°
75
BEARINGS OIL SEALS
4035b35a 3736 38
202A
302A
402A
Type
Position
Nr°
39 77
452A
502A
602A
78 79
30 31
33
5150
32
34
6204
6205
6207
6002
6002
6004
6002
6004
6205
6005
6007
6009
-
6004
6205
20x40x7 TC
25x47x7 TC
35x72x7 TC
-
20x30x7 SC
25x35x7 SC
-
35x47x7 SC
45x62x7 SC
6200 6200 6005 6202 6202 6204 6005
6200 6200 6007 6004 6202 6204 6204
6200(6300*)
6202 6007 6004 6204 6205 6004
6202 6202 6009 6205 6205 6206 6205
6302 6204 6009 6205 6205 6207 6205
6204 6304 6009 6205 6206 6209 6205
-
-
-
25x40x7 SC
35x47x7 SC
35x47x7 SC
45x62x7 SC
45x62x7 SC
45x62x7 SC
25x47x7 SC
40x52x7 SC
50x62x7 SC
30x47x7 TC
30x47x7 TC
30x52x7 TC
40x62x7 TC
35x72x7 TC
45x85x7 TC
20x30x7 SC
20x30x7 SC
20x30x7 SC
25x35x7 SC
25x35x7 SC
25x35x7 SC
80a
BEARINGS OIL SEALS
7741b41a 43a42 43b
403A
503A
603A
Type
Position
Nr°
6201
6201
6201
6201
6301
6301
6002
6004
6004
6005
6007
6007
6005
6004
6004
25x47x7 SC
40x52x7 SC
50x62x7 SC
25x40x7 SC
20x30x7 SC
25x35x7 SC
25x40x7 SC
35x47x7 SC
35x47x7 SC
80b
75
BEARINGS OIL SEALS
4035b35a 3736 38
402C
602C
Type
Position
Nr°
39 76^ 77^ 78
6202 6202 6007 6004 6204 6205 6004
6204 6304 6009 6205 6206 6209 6205 50x75x7 SC
40x52x7 SC-35x47x7 SC
45x62x7 SC
25x47x7 SC
50x68x7 SC
30x52x7 TC
45x85x8 TC
77^41b41a 43a42 80a
BEARINGS OIL SEALS
Type
Position
Nr°
6201
6201
6201
6301
6004
6004
6007
6007
40x52x7 SC
35x47x7 SC
403A
503A
40x52x7 SC
35x47x7 SC
78
38 3737
35b35a
77^
3979
76^
75
40
36
77^
77
41a 41b 4242 43a
80a
80b
43b
35a 35b
78
39 38
40
36
37
75
79
77
The Oil Seal 77 comes only upon request mounted in reducers 402A-502A-602A
The Oil Seal 77 comes only upon request mounted in reducers 403A-503A-603A
www.renold.com
54
The condensed dimensions shown on these pages are for general reference only and are not for construction.Certified drawings of all ratings are available for construction purposes.
NemaFrame
S5656
143T145T
182T184T
N N-W AH AJ AK BD TAP KEY
1
2
2
1
2
2
2
2
2
5
5
7
4
4
8
6
6
8
-16
-16
-13
KEYWAY DIMENSIONS
( W x d ) (S)
NEMA SHAFT
(U)
1516/
38/
78/ 1
58/
78/
18/
U
78/
14/
34/
116/
18/
58/
78/
78/
14/
12/
12/
12/
12/
12/
78/ 1
2/
38/
38/
14/
316/
316/
15
8/1
38/
11
8/
58/
78/
316/ 3
32/x
316/ 3
32/x
14/ 1
8/x
516/ 5
32/x
38/ 3
16/x
0.709
0.964
1.241
1.518
1.796
Nema Standard Motor Dimensions Reference
45° 45°
TAP
AJ
W
S
d
U AK
BD
AH
N
N-W
NEMA DIMENSIONS
NEMA SHAFT ANDKEYWAY DIMENSIONS
www.renold.com
55
56
Notes
www.renold.com
57
Notes
www.renold.com
58
Worldwide Sales and Services
www.renold.com
ARGENTINABennett Anderson,Gonzales Y Cia SA, J.Aguero 1817(1605) MunroBuenos AiresTel: + 54 11 4761 5007/ 3531Fax: + 54 11 4760 0866
Los Ases Ketten SA,Avda Gaona 4046,1407 Buenos AiresTel: + 54 116710855Fax: + 54 116713141
AUSTRALIARenold Australia Proprietary Ltd508-520 Wellington Road,Mulgrave, Victoria 3170, MulgraveNorthTel: +61 (0) 3 9262 3333Fax: +61 (0) 3 9561 8561Branch Tel: +61 (0) 3 9262 3355Email: [email protected]
Unit 1,12-18 Victoria Street, Lidcombe,Sydney, NSW 2141.Tel: +61 (0) 2 9649 3122Fax: +61 (0) 2 9646 1295Email: [email protected]
Unit 10,31 Boyland Avenue,Coopers Plains, Brisbane,Queensland 4108.Tel: +61 (0) 7 3275 2155Fax: +61 (0) 7 3875 1779
Corner Orsmond & George Sts.Hindmarsh, Adelaide,South Australia 5007.Tel: +61 (0) 8 8346 9077Fax: +61 (0) 8 8340 1217
Unit 2,127 Grandstand Street, Belmont,Perth, West Australia 6104.Tel: +61 (0) 8 9479 1388Fax: +61 (0) 8 9479 1364
Unit 1356 Industrial Drive,Mayfield, NSW 2304Tel: +61 (0) 2 4960 8440Fax: +61 (0) 2 4960 8455
PO Box 159,Unanderra, Wollongong, NSW 2526.Tel: +61 (0) 2 42 621771Fax: +61 (0) 2 42 621772
Shop B,247 Ingham Road,Garbutt, Townsville, QLD 4814.Tel: +61 (0) 7 4779 5922Fax: +61 (0) 7 4775 1446
AUSTRIARenold GmbHRudolf Hausner Gasse 60/1A-1220 WienAustria.Tel: +43 (0) 1 3303484 0Fax: +43 (0) 1 3303484 5
BANGLADESHBrady & Co (Bangladesh) Ltd,31, Bangabandhu Avenue,Dhaka-1000Tel: + 880 2802358Fax: + 880 2802358
BELGIUMRenold Continental LtdAllée Verte 1,1000 Brussel.Tel: +32 (0) 2 2011262Fax: +32 (0) 2 2032210Email: [email protected]
CANADARenold Canada Ltd121 Roy Boulevard, Brantford,Ontario, N3T 5N4Toll Free: 1-800-265-9970Tel: +1 519 756 6118Fax: +1 519 756 1767Email: [email protected]
622 rue De Hull,Ville La Salle,Quebec, H8R 1V9.Toll Free: 1-800-361-1414Tel: +1 514 367 1764Fax: +1 514 367 4993
CHILESargent S.A.,Avda. Presidente Bulnes No 205,Casilla 166-D, Santiago - Chile.Tel: (56 2) 510 3000Fax: (56 2) 698 3989Email: [email protected]
CHINARenold Transmission (Shanghai)Company LimitedUnit 4A, Block 1569 XiYa RoadWaigaoqiao Free Trade ZoneShanghai 200131Tel: +86 21 5046 2696Fax: +86 21 5046 2695Email: [email protected]
COLOMBIATransmission de Potencia SACarrera 68B No10 - 98Apartado Aereo 6794Santafe de Bogato DCTel: + 571 2600100Fax: + 571 2904823
Importadora Casa Sueca Ltda.,Calle 52, No. 1N-74,Apartado Aereo 1208, Cali.Tel: 00 57 2346 4455Fax: 00 57 2346 4967
CZECH REPUBLICRenold GesmbHTechnical Office, Dipl. Ing. R.Badura,Jaroslavice 129, CZ-76001 Zlin.Tel: +42 67 7211074Fax: +42 67 7211074
DENMARKRenold A/S,Skelmarksvej 6, Postboks 90,2605 Brøndby.Tel: +45 43 452611Fax: +45 43 456592Email: [email protected]
EGYPTItaco,Int’l for Trading & Agency,P.O. Box 7550, Nasr City, Cairo.Tel: + 20 2 2718036Fax: + 20 2 2878089
EL SALVADORMVA & CiaResidencial San Luis,Avenida 4 #45 Block 2,San Salvador,El-Salvador, Central AmericaTel: + 503 274 649
FINLANDKraftmek Oy,Hitsaajankatu 9, P.O. Box 36,FIN-00811 HelsinkiTel: + 358 9 7557355Fax: + 358 9 7550414
FRANCEBrampton Renold,Zone Industrielle A, Rue de la Pointe, BP 359, 59473 Seclin Cedex.Tel: +33 (0) 320 16 29 29Fax: +33 (0) 320 16 29 00
GERMANYArnold & Stolzenberg,Juliusmühle,D37574 Einbeck.Postal address:PO Box 1635 + 1645D37557 Einbeck.Tel: +49 (0) 5562 81248Fax: +49 (0) 5562 81130Email: [email protected]
GREECEProvatas Engineering53/47 Dragatsaniou St,185 - 45 Piraeus.Tel: + 30 1 4170266Fax + 30 1 4170253
HOLLANDRenold Continental Ltd,Jarmuiden 30c,1046 AD Amsterdam.Tel: +31 (0) 20 614 6661Fax: +31 (0) 20 614 6391Email: [email protected]
HUNGARYRenold GesmbHTechnical Office, Ing. Havasi Janos,Ret Utca 25, H-6200 Kiskörös.Tel: +36 (0) 78 312483Fax: +36 (0) 78 312484
INDIAVoltas Limited.,Machine Tool Division,Voltas House B, 3rd Floor,TB Kadam Marg,Chinchpokli,Mumbai 400033Tel: 091 22 370 0829Fax: 091 22 371 4889Email: [email protected]
NORTHERN IRELANDHenry R. Ayton Ltd,Derriaghy, Dunmurry, Belfast.Tel: 01232 618511Fax: 01232 602436
SOUTHERN IRELANDHenry R. Ayton Ltd.,Broomhill Drive, Tallagh, Dublin 24Tel: + 353 (0) 1 4517922Fax: + 353 (0) 1 4517922
ISRAELTechnica J. Bokstein Co. Ltd,3 Hatrupa Street,Netanya 42504Tel: + 972 9 8850505Fax: + 972 36131074
ITALYBianchi Cuscinetti SpAVia Zuretti, 102, 20125 Milano,Tel: + 39 02 67861Fax: + 39 02 66981669
JAMAICAMasterton Ltd,21-25 Hanover Street, P.O. Box 73Kingston.Tel: + 18 767 540557Fax: + 18 769 227807
KOREAS.S. Corporation,Yeouido, P.O. Box 60, Seoul.Tel: 00-822-783-6829Fax: 00-822-784-9322Email: [email protected]
MALAYSIARenold (Malaysia)LOT 2, Jalan Kecapi 33/2,Eilte Industrial Park,Off Jalan Bukit, Kemuning,40400 Shah Alam, Selangor,Malaysia.Tel: + 60 3 5122 9880Fax: + 60 3 5191 9881Email: [email protected]
201, Jalan Simbang,Taman Perling,81200 Joho Bharu, Johor, Malaysia.Tel: + 60 (0) 7 2384152-3Fax: + 60 (0) 7 2384155Email: [email protected]
67A, Jalan Medan Ipoh 6,Bandar Baru Medan,31400 Ipoh, PerakTel: + 60 (0) 5 548 0059Fax: + 60 (0) 5 548 0214Email: [email protected]
Worldwide Sales and Services28B Jalan Perai Jaya 3,Bandar Perai Jaya,13600 Perai,Penang, MalaysiaTel: + 604-399 9648Tel: + 604-399 0648Fax: + 604-399 5649Email: [email protected]
MAURITIUSDynamotors Ltd,P.O. Box 733, Bell Village,Tel: + 230 2122847/8/9Fax: + 230 2088348
MEXICOAccessorios Automotrices yRodamientos Industriales,S.A. de C.V., Calz Legaria 833-ACol Irigacion, Mexico DF 11500Tel: + 52 5 395 6300Fax: + 52 5 395 6370
NEW ZEALANDRenold New Zealand,594 Rosebank Road,Avondale, Auckland.
Postal Address: PO Box 19460,Avondale, Auckland.Tel: + 64 (0) 9 828 5018Fax: + 64 (0) 9 828 5019Email: [email protected]
Christchurch Branch Office,32 Birmingham Drive, Christchurch,PO Box 9006, Christchurch,Tel: + 64 03 338 2169Fax: + 64 03 338 8663
NORWAYG. Heier A/S,Postal Address: Postboks 6615,Rodelokka, 0502 Oslo, Norway.Office Address: Thv, Meyersgt.7, Oslo.Tel: + 47 232 34230Fax: + 47 232 34242
PAKISTANBrady & Co. of Pakistan Ltd,Shernaz House, P.O. Box 4453,West Wharf Road, Karachi 2.Tel: + 92 21.2310367/201712Fax: + 92 21.2313376/2313378
PERUCorporacion Basco S.A.C.Av. Argentina 1165,Lima 1, RUC 25776186.Tel: + 51 1 4336633Fax: + 51 1 4313188
PORTUGALHarker, Sumner, S.A.Zona Industrial Maia 1 - Sector X4475 - 132 Gemunde - MaiaPortugal.Tel: + 351 229 4478 090Fax: + 351 229 4478 098E-mail: [email protected]
SINGAPORERenold Transmission Limited63 Hillview Avenue, #07-13,Lam Soon Industrial Building,Singapore 669569.Tel: + 65 6760 2422Fax: + 65 6760 1507E-mail: [email protected]
SOUTH AFRICARenold Croft (Pty) Limited,Corner Liverpool and Bolton Streets,Nestadt Industrial Sites, Benoni, 1501Postal Address: Private Bag x 030,Benoni, 1500.Tel: + 27 (0) 11 747 9500Fax: + 27 (0) 11 747 9505E-mail: [email protected]
P.O. Box 2661, Witbank 1035,Mpumalanga,Republic of South Africa.Tel: +27 (0) 13 692 7760Fax: +27 (0) 13 697 0546Email: [email protected]
SPAINBrown Pestell,Ctra N-11 Lm. 599.5 Nave 5,08780 Palleja, Barcelona.Tel: + 34 93 6630740Fax: + 34 93 6632057
SWEDENRenold A/SSkelmarksvej 6, Postboks 902605 BrøndbyDenmark.Tel: + 45 43 452611Fax: + 45 43 456592E-mail: [email protected]
SWITZERLANDRenold (Switzerland) Gmbh,Ringstrasse 16, Postfach 1115CH-8600 Dübendorf 1.Tel: + 41 (0) 1 824 8484Fax: + 41 (0) 1 824 8411E-mail: [email protected]
Route De Prilly 25,CH-1023 Crissier.Tel: + 41 (0) 21 632 9460Fax: + 41 (0) 21 632 9475E-mail: [email protected]
THAILANDUnited Power Engineering Co Ltd4 Soi Sukhumvit 81 (Siripot)Sukhumvit RoadBangjak, PhrakhanongBangkok 10260.Tel: + 66 2 7425366Fax: + 66 2 7425379
TRINIDADTracmac Engineering Ltd,P.O. Box 945, Port of Spain,Trinidad, West Indies.Tel: + 1 665 460 1532Fax: + 1 868 671 0012
TURKEYGlengo Ithalat lhracat MumessillikAS,Gungoren Cad. No. 35 Bagcilar,34560Bakirkoy, Istanbul.Tel: + 90 212 4613970Fax: + 90 212 4613972www.glengo.com.tr
UNITED KINGDOMRenold GearsHolroyd Gears Works, Milnrow,Rochdale OL16 3LS Tel: +44 (0) 1706 751000Fax: +44 (0) 1706 751001E-mail: [email protected]: www.renold.com
Renold Clutches & CouplingsWentloog Corporate Park, Newlands Road, Cardiff CF3 2EU, WalesTel: + 44 (0) 29 20792737 Fax: + 44 (0) 29 20793004(Sales):+ 44 (0) 29 20791360E-mail: [email protected]: www.renold.com
Renold Hi-Tec Couplings112 Parkinson RoadHalifax HX1 3QHTel: +44 (0) 1422 255000Fax: +44 (0) 1422 320273E-mail: [email protected]: www.renold.com
HolroydHarbour Lane North, Milnrow,Rochdale, OL16 3LQ.Tel: +44 (0) 1706 526 590Fax: +44 (0) 1706 353 350E-mail: [email protected]: www.holroyd.com
Renold ChainUK Sales, Horninglow Road,Burton upon Trent, Staffordshire, DE14 2PS.Tel: +44 (0) 1283 512 940Fax: +44 (0) 1283 512 628E-mail: [email protected]
USARenold IncBourne Street, PO Box A, Westfield,New York, 14787-0546Tel: + 1 716 326 3121Fax: + 1 716 326 6121E-mail: [email protected]
VENEZUELAEquipos Y Acessorios Astral CA,Apartado 1651 Valencia.Tel: + 584 1 332042Fax: + 584 1 345641
WEBwww.renold.com
Terms and Conditions• In the interests of safety, customers are reminded that when purchasing anytechnical product for use at work (or otherwise), any additional or up-to-dateinformation and guidance, which it has not been possible to include in thepublication, should be obtained by you from your local sales office in relation to thesuitability and the safe and proper use of the product. All relevant information andguidance must be passed on by you to the person engaged in, or likely to beaffected by or responsible for the use of the product• The performance levels and tolerances of our product stated in this catalogue(including without limitation, serviceability, wearlife, resistance to fatigue,corrosion protection) have been verified in a programme of testing and qualitycontrol in accordance with Renold, independent and/or international standardrecommendations. No representations or warranties are given that our productshall meet the stated performance levels or tolerances for any given applicationoutside the performance levels and tolerances for the product’s own specificapplication and environment.
• Whilst all reasonable care in compiling the information contained in thiscatalogue is taken, no responsibility is accepted for errors. • All information contained in this catalogue is subject to change without notice.• The illustrations used in this catalogue represent the type of product describedbut the goods supplied may vary in some detail from those illustrated.• The right is reserved to make modifications to the product to meetmanufacturing conditions and/or developments (for example in design ormaterials).• Product can be supplied by Renold companies or representatives around theworld on the standard terms and conditions of sale of the company orrepresentative from which the product is purchased.• Copyright Renold Power Transmission Limited 2001. All rights reserved.Nothing contained in this publication shall constitute a part of any contract, expressor implied.
59
www.renold.com
Superior Gear Technology
CANADARenold Canada LtdHead Office & Ontario District121 Roy Boulevard, Brantford, Ontario N3T 5N4Toll Free Tel: 800 265 9970Tel: (519) 756 6118 Fax: (519) 756 1767 Email: [email protected]
Quebec District622 rue De Hull, Ville La Salle, Quebec H8R 1V9Toll Free Tel: 800 361 1414Tel: (514) 367 1764 Fax: (514) 367 4993
Western DistrictToll Free Tel: 800 265 9970 Fax: 800 661 6118
Atlantic and Manitoba DistrictToll Free Tel: 800 265 9970 Fax: 800 661 6118
USARenold Incorporated100 Bourne StreetWestfield, NY 14787Toll Free Tel: 1 800 879 2529 Fax: 716 326 8229www.renoldajax.com
WEBwww.renold.com
E-MAILe-mail : [email protected]
For other country distributors please contact Renold UK.
www.renold.com
