ROYCO Aerospace & Defense Fluids Reference Guide 2012

PROTECTING WHAT IS IMPORTANT

Aerospace and Defense Fluids Reference Guide

1

For Questions or Comments, please call +1 (203) 573-4595

At the dawn of the jet age Anderol Specialty Lubricants’

ROYCO® brand established itself as the preeminent lubricant

for aviation. Ever since,

ROYCO® fluids have been

a trusted and a leading

technology for the most

critical of applications.

From the bitter cold of the

poles to the simmering

heat of the world’s deserts, these engineered fluids deliver

unrivaled performance for the most advanced defense and

commercial aerospace requirements. It is certain that the

ROYCO® brand is what you can rely on for your aerospace

and defense fluids needs.

Advanced Technology for:

• Fire-Resistant Hydraulic Fluids • Mineral Oil based Hydraulic Fluids • Performance Compounds and Greases • Specialty Application & Performance Fluids • Turbine & Drivetrain Fluids • Weapons Cleaner/Preservative Lubes

ROYCO® Aerospace and Defense Fluids set a quality and technology standard for the confidence that you can depend on today and have trusted for the past seventy years.

AS 9100 / ISO 9001:2000 Certified

1


Table of Contents

Cross Reference Tablesi. Product to MIL-SPEC Cross-Reference ............................................ 2 ii. MIL-SPEC to Product Cross-Reference ............................................ 3

iii. NATO code to Product Cross-Reference ........................................ 4

iv. National Stock Number to Product Cross-Reference ................... 5 - 6

Fluid Category Summaries .................................................................. 7 - 9

Hydraulic Fluids ............................................................................. 10 - 17

Weapons Cleaner & Preservative Lubes ............................................. 18 - 19

Turbine & Drivetrain Fluids ............................................................... 20 - 25

Performance Compounds & Greases ................................................ 26 - 35

Specialty Application & Performance Fluids ....................................... 36 - 48

Appendixi. Shelf Life Descriptions ............................................................... 49 ii. Fluid-Elastomer Compatibility Tables .................................... 50 - 52

iii. Tariff code table ....................................................................... 53

Aerospace and Defense Fluids are proudly brought to you by:

2


3


Product to MIL-SPEC Cross-Reference

Fluid Specification NATO Code Page

ROYCO® LGF BMS-3-32-TYPE 2 N/A 11

ROYCO® SSF BMS-3-32-TYPE 1 N/A 10

ROYCO® 1MS MIL-PRF-83483 S-722 26

ROYCO® 11MS MIL-G-7711A O-155 27

ROYCO® 22CF MIL-PRF-81322 G-395 28

ROYCO® 22MS MIL-G-81827 S-578 29

ROYCO® 27 MIL-PRF-23827-TYPE 1 G-354 30

ROYCO® 43 SAE-AMS-4343 G-392 31

ROYCO® 44 SAE-AMS-2518 S-720 32

ROYCO® 46 MIL-L-46000 O-158 18, 33

ROYCO® 49 MIL-DTL-23549 G-392 34

ROYCO® 64 MIL-G-21164 G-353 35

ROYCO® 308CA MIL-PRF-32033 O-190 (obsolete) 36

ROYCO® 315 MIL-PRF-3150 O-192 37

ROYCO® 363 MIL-PRF-7870 O-142 38

ROYCO® 481 MIL-PRF-6081- GRADE 1010 O-133 20

ROYCO® 482 MIL-C-6529-TYPE 2 C-609 39

ROYCO® 483 MIL-C-6529-TYPE 3 C-610 40

ROYCO® 500 MIL-PRF-23699-STD O-156 21

ROYCO® 555 DOD-PRF-85734 O-160 22

ROYCO® 560 MIL-PRF-23699-HTS O-156 23

ROYCO® 581 MIL-C-6529-TYPE 1 C-608 41

ROYCO® 586L MIL-PRF-6086-GRADE L O-153 42

ROYCO® 586M MIL-PRF-6086-GRADE M O-155 43

ROYCO® 602 MIL-PRF-87252 S-1748 44

ROYCO® 634E MIL-PRF-63460-E S-758 19, 45

ROYCO® 717 MIL-DTL-17111 H-575 12

ROYCO® 756 MIL-PRF-5606 H-515 13

ROYCO® 770 MIL-PRF-46170 H-544 16

ROYCO® 782 MIL-PRF-83282 H-537 17

ROYCO® 783 MIL-PRF-6083 C-635 15

ROYCO® 808 MIL-PRF-7808-GRADE 3 OX-9 24

ROYCO® 885 MIL-PRF-6085 O-147 46

ROYCO® 899 MIL-PRF-23699-CI O-156 25

ROYCO® 950 MIL-PRF-7024-TYPE 2 O-158 48

2


3


MIL-SPEC to Product Cross-Reference

Specification Fluid NATO Code Page

BMS-3-32-TYPE 1 ROYCO® SSF N/A 10

BMS-3-32-TYPE 2 ROYCO® LGF N/A 11

DOD-PRF-85734 ROYCO® 555 O-160 22

MIL-C-6529-TYPE 1 ROYCO® 581 C-608 41

MIL-C-6529-TYPE 2 ROYCO® 482 C-609 39

MIL-C-6529-TYPE 3 ROYCO® 483 C-610 40

MIL-DTL-17111 ROYCO® 717 H-575 12

MIL-DTL-23549 ROYCO® 49 G-392 34

MIL-G-21164 ROYCO® 64 G-353 35

MIL-G-7711A ROYCO® 11MS O-155 27

MIL-G-81827 ROYCO® 22MS S-578 29

MIL-L-46000 ROYCO® 46 O-158 18, 33

MIL-PRF-23699-CI ROYCO® 899 O-156 25

MIL-PRF-23699-HTS ROYCO® 560 O-156 23

MIL-PRF-23699-STD ROYCO® 500 O-156 21

MIL-PRF-23827-TYPE 1 ROYCO® 27 G-354 30

MIL-PRF-3150 ROYCO® 315 O-192 37

MIL-PRF-32033 ROYCO® 308CA O-190 (obsolete) 36

MIL-PRF-46170 ROYCO® 770 H-544 16

MIL-PRF-5606 ROYCO® 756 H-515 13

MIL-PRF-6081- GRADE 1010 ROYCO® 481 O-133 20

MIL-PRF-6083 ROYCO® 783 C-635 15

MIL-PRF-6085 ROYCO® 885 O-147 46

MIL-PRF-6086-GRADE L ROYCO® 586L O-153 42

MIL-PRF-6086-GRADE M ROYCO® 586M O-155 43

MIL-PRF-63460-E ROYCO® 634E S-758 19, 45

MIL-PRF-7024-TYPE 2 ROYCO® 950 O-158 48

MIL-PRF-7808-GRADE 3 ROYCO® 808 OX-9 24

MIL-PRF-7870 ROYCO® 363 O-142 38

MIL-PRF-81322 ROYCO® 22CF G-395 28

MIL-PRF-83282 ROYCO® 782 H-537 17

MIL-PRF-83483 ROYCO® 1MS S-722 26

MIL-PRF-87252 ROYCO® 602 S-1748 44

SAE-AMS-2518 ROYCO® 44 S-720 32

SAE-AMS-4343 ROYCO® 43 G-392 31

4


5


NATO code to Product Cross-Reference

NATO Code Specification Fluid Page

C-608 MIL-C-6529-TYPE 1 ROYCO® 581 41

C-609 MIL-C-6529-TYPE 2 ROYCO® 482 39

C-610 MIL-C-6529-TYPE 3 ROYCO® 483 40

C-635 MIL-PRF-6083 ROYCO® 783 15

G-353 MIL-G-21164 ROYCO® 64 35

G-354 MIL-PRF-23827-TYPE 1 ROYCO® 27 30

G-392 MIL-DTL-23549 ROYCO® 49 34

G-392 SAE-AMS-4343 ROYCO® 43 31

G-395 MIL-PRF-81322 ROYCO® 22CF 28

H-515 MIL-PRF-5606 ROYCO® 756 13

H-537 MIL-PRF-83282 ROYCO® 782 17

H-544 MIL-PRF-46170 ROYCO® 770 16

H-575 MIL-DTL-17111 ROYCO® 717 12

O-133 MIL-PRF-6081- GRADE 1010 ROYCO® 481 20

O-142 MIL-PRF-7870 ROYCO® 363 38

O-147 MIL-PRF-6085 ROYCO® 885 46

O-153 MIL-PRF-6086-GRADE L ROYCO® 586L 42

O-155 MIL-G-7711A ROYCO® 11MS 27

O-155 MIL-PRF-6086-GRADE M ROYCO® 586M 43

O-156 MIL-PRF-23699-CI ROYCO® 899 25

O-156 MIL-PRF-23699-HTS ROYCO® 560 23

O-156 MIL-PRF-23699-STD ROYCO® 500 21

O-158 MIL-L-46000 ROYCO® 46 18, 33

O-158 MIL-PRF-7024-TYPE 2 ROYCO® 950 48

O-160 DOD-PRF-85734 ROYCO® 555 22

O-190 (obsolete) MIL-PRF-32033 ROYCO® 308CA 36

O-192 MIL-PRF-3150 ROYCO® 315 37

OX-9 MIL-PRF-7808-GRADE 3 ROYCO® 808 24

S-578 MIL-G-81827 ROYCO® 22MS 29

S-720 SAE-AMS-2518 ROYCO® 44 32

S-722 MIL-PRF-83483 ROYCO® 1MS 26

S-758 MIL-PRF-63460-E ROYCO® 634E 19, 45

S-1748 MIL-PRF-87252 ROYCO® 602 44

N/A BMS-3-32-TYPE 1 ROYCO® SSF 10

N/A BMS-3-32-TYPE 2 ROYCO® LGF 11

4


5


National Stock Number Product Specification Page

9150-00-082-7524 ROYCO® 756 MIL-PRF-5606 13

9150-00-108-5359 ROYCO® 808 MIL-PRF-7808-GRADE 3 24

9150-00-111-6254 ROYCO® 770 MIL-PRF-46170 16

9150-00-111-6255 ROYCO® 770 MIL-PRF-46170 16

9150-00-111-6256 ROYCO® 770 MIL-PRF-46170 16

9150-00-119-9291 ROYCO® 43 SAE-AMS-4343 31

9150-00-145-0268 ROYCO® 22CF MIL - PRF - 81322 28

9150-00-149-7431 ROYCO® 782 MIL-PRF-83282 17

9150-00-149-7432 ROYCO® 782 MIL-PRF-83282 17

9150-00-180-6266 ROYCO® 899 MIL-PRF-23699-CI 25

9150-00-180-6290 ROYCO® 782 MIL-PRF-83282 17

9150-00-180-6381 ROYCO® 11MS MIL - G - 7711A 27

9150-00-180-6382 ROYCO® 11MS MIL - G - 7711A 27

9150-00-180-6383 ROYCO® 11MS MIL - G - 7711A 27

9150-00-181-7724 ROYCO® 22CF MIL - PRF - 81322 28

9150-00-223-4004 ROYCO® 64 MIL-G-21164 35

9150-00-223-4116 ROYCO® 586L MIL-PRF-6086-GRADE L 42

9150-00-223-4129 ROYCO® 885 MIL-PRF-6085 46

9150-00-223-4130 ROYCO® 586M MIL-PRF-6086-GRADE M 43

9150-00-223-4134 ROYCO® 756 MIL-PRF-5606 13

9150-00-231-2356 ROYCO® 315 MIL-PRF-3150 37

9150-00-231-2357 ROYCO® 315 MIL-PRF-3150 37

9150-00-231-2361 ROYCO® 315 MIL-PRF-3150 37

9150-00-231-6676 ROYCO® 481 MIL-PRF-6081- GRADE 1010 20

9150-00-231-6689 ROYCO® 308CA MIL-PRF-32033 36

9150-00-231-9045 ROYCO® 308CA MIL-PRF-32033 36

9150-00-231-9062 ROYCO® 308CA MIL-PRF-32033 36


9150-00-235-5555 ROYCO® 49 MIL-DTL-23549 34

9150-00-240-2235 ROYCO® 586M MIL-PRF-6086-GRADE M 43

9150-00-252-6383 ROYCO® 756 MIL-PRF-5606 13

9150-00-257-5449 ROYCO® 885 MIL-PRF-6085 46

9150-00-263-3490 ROYCO® 363 MIL-PRF-7870 38

9150-00-265-9408 ROYCO® 756 MIL-PRF-5606 13

9150-00-265-9417 ROYCO® 586L MIL-PRF-6086-GRADE L 42

9150-00-269-8255 ROYCO® 43 SAE-AMS-4343 31



9150-00-273-2397 ROYCO® 363 MIL-PRF-7870 38


9150-00-281-2060 ROYCO® 308CA MIL-PRF-32033 36

9150-00-281-9438 ROYCO® 363 MIL-PRF-7870 38

9150-00-408-9635 ROYCO® 22CF MIL-PRF-81322 28

9150-00-542-1430 ROYCO® 363 MIL-PRF-7870 38

9150-00-664-6518 ROYCO® 885 MIL-PRF-6085 46

9150-00-681-5999 ROYCO® 899 MIL-PRF-23699-CI 25

9150-00-687-4241 ROYCO® 46 MIL-L-46000 18, 33

9150-00-753-4686 ROYCO® 46 MIL-L-46000 18, 33

9150-00-754-2595 ROYCO® 64 MIL-G-21164 35



9150-00-823-8047 ROYCO® 49 MIL-DTL-23549 34

9150-00-889-3522 ROYCO® 46 MIL-L-46000 18, 33

9150-00-935-4017 ROYCO® 22MS MIL-G-81827 29

9150-00-935-4017 ROYCO® 27 MIL-PRF-23827-TYPE 1 30

National Stock Number to Product Cross-Reference

6


7



9150-00-935-4018 ROYCO® 64 MIL-G-21164 35

9150-00-935-5851 ROYCO® 22CF MIL - PRF - 81322 28

9150-00-935-6597 ROYCO® 46 MIL-L-46000 18, 33

9150-00-935-9807 ROYCO® 783 MIL-PRF-6083 15

9150-00-935-9808 ROYCO® 783 MIL-PRF-6083 15

9150-00-935-9809 ROYCO® 783 MIL-PRF-6083 15

9150-00-935-9810 ROYCO® 783 MIL-PRF-6083 15

9150-00-944-8953 ROYCO® 22CF MIL - PRF - 81322 28

9150-00-965-2003 ROYCO® 64 MIL-G-21164 35

9150-00-985-7099 ROYCO® 899 MIL-PRF-23699-CI 25

9150-00-985-7244 ROYCO® 22MS MIL-G-81827 29


9150-00-985-7245 ROYCO® 22MS MIL-G-81827 29


9150-00-985-7246 ROYCO® 22MS MIL-G-81827 29


9150-00-985-7247 ROYCO® 22MS MIL-G-81827 29


9150-00-985-7248 ROYCO® 22MS MIL-G-81827 29


9150-00-985-7316 ROYCO® 49 MIL-DTL-23549 34

9150-01-009-7709 ROYCO® 782 MIL-PRF-83282 17

9150-01-018-8959 ROYCO® 885 MIL-PRF-6085 46

9150-01-053-6688 ROYCO® 634E MIL-PRF-63460-E 19, 45

9150-01-054-6453 ROYCO® 634E MIL-PRF-63460-E 19, 45

9150-01-079-6124 ROYCO® 634E MIL-PRF-63460-E 19, 45

9150-01-102-1473 ROYCO® 634E MIL-PRF-63460-E 19, 45


9150-01-158-0462 ROYCO® 770 MIL-PRF-46170 16

9150-01-209-2684 ROYCO® 555 DOD-PRF-85734 22

9150-01-209-3399 ROYCO® 555 DOD-PRF-85734 22

9150-01-210-1938 ROYCO® 555 DOD-PRF-85734 22

9150-01-219-1629 ROYCO® 64 MIL-G-21164 35

9150-01-237-7468 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-262-3358 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-304-0885 ROYCO® 602 MIL-PRF-87252 44

9150-01-306-2470 ROYCO® 602 MIL-PRF-87252 44

9150-01-306-2475 ROYCO® 602 MIL-PRF-87252 44

9150-01-311-5640 ROYCO® 885 MIL-PRF-6085 46

9150-01-327-9631 ROYCO® 634E MIL-PRF-63460-E 19, 45

9150-01-332-7819 ROYCO® 770 MIL-PRF-46170 16

9150-01-336-7174 ROYCO® 602 MIL-PRF-87252 44

9150-01-345-6449 ROYCO® 22CF MIL-PRF-81322 28

9150-01-378-0559 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-378-0693 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-378-0744 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-439-0756 ROYCO® 560 MIL-PRF-23699-HTS 23

9150-01-439-0764 ROYCO® 560 MIL-PRF-23699-HTS 23

9150-01-439-2070 ROYCO® 560 MIL-PRF-23699-HTS 23

9150-01-466-7280 ROYCO® 1MS MIL-PRF-83483 26

9150-01-476-1063 ROYCO® 500 MIL-PRF-23699-STD 21

9150-01-476-1074 ROYCO® 500 MIL-PRF-23699-STD 21

9150-01-476-1075 ROYCO® 500 MIL-PRF-23699-STD 21

9150-01-501-5729 ROYCO® 22CF MIL - PRF - 81322 28

9150-01-519-1200 ROYCO® 22CF MIL - PRF - 81322 28

National Stock Number to Product Cross-Reference

6


7


Product Specifications* ISO GradeNATO

DesignationDescription

ROYCO® SSF BMS - 3 - 32 - TYPE 1 — — Shock Strut Fluid

ROYCO® LGF BMS - 3 - 32 - TYPE 2 — — Landing Gear Fluid

ROYCO® 717 — 32 H-575 Power Transmission Hydraulic Fluid

ROYCO® 756 MIL - PRF - 5606 14 H-515 “Red Oil” - Hydraulic Fluid

ROYCO® 756A — 14 —Hydraulic fluid that meets obsolete MIL-PRF-5606(A)

ROYCO® 757 — 4 — Hydraulic and Preservative Fluid

ROYCO® 783 MIL - PRF - 6083 14 C-635Land Systems Hydraulic and Preservative Fluid

ROYCO® 770 MIL - PRF - 46170 16 H-544Fire-Resistant, Synthetic, Severe-Duty Hydraulic Fluid

ROYCO® 782 MIL - PRF - 83282 14 H-537 Fire-Resistant, Synthetic Hydraulic Fluid

Hydraulic Fluids

ROYCO® Hydraulic Fluids are engineered for the most rigorous of applications – the battlefield. With such credentials you can be sure that ROYCO® Hydraulic Fluids will perform for your aerospace and industrial hydraulic needs. These fluids are additized to provide optimal anti-wear, corrosion, demulsibility, and oxidation performance across broad operating temperature ranges. For added reliability many of the ROYCO® Hydraulic Fluids are produced to meet or exceed the military’s cleanliness requirements for hydraulic fluids.

Weapons Cleaner & Preservative Lubes

The modern firearm has come a long way. The world’s militaries demand that their firearms work every time and all the time. The ROYCO® Weapons Cleaner & Preservative Lubes are not simple “gun oils.” These fluids are complex formulations of contemporary technology that removes fouling, prevents corrosion, and provides long-lasting lubrication for weapon readiness. These characteristics are proven for use in both small and large caliber weapons - even after severe firing and in the harshest of environments. A truly military grade product that will exceed any sporting demands.

Product Specifications* NATO Designation Description

ROYCO® 46 MIL - L - 46000 O-158 Semi-Fluid Synthetic Lubricant with Lithium

ROYCO® 634E MIL - PRF - 63460 - E S-758 Advanced Weapons Cleaner, Lube & Preservative

Fluid Category Summaries

8


9



ROYCO® 481 MIL - PRF - 6081 GRADE 1010 O-133 Mineral Oil Turbine Engine Oil

ROYCO® 500 MIL - PRF - 23699 STD O-156 Synthetic Turbine Engine Oil

ROYCO® 555 DOD - PRF - 85734 O-160 Turbine Engine & Helicopter Transmission Oil

ROYCO® 560 MIL - PRF - 23699 HTS O-156 High Temperature Stability Turbine Engine Oil

ROYCO® 808 MIL - PRF - 7808 GRADE 3 O-148 Low viscosity Turbine Engine Oil

ROYCO® 899 MIL - PRF - 23699 CI O-156 Corrosion Inhibition Turbine Engine Oil


ROYCO® 1MS MIL - PRF - 83483 —Anti-Seize Thread and Severe-Duty/Heavy-Load Compound

ROYCO® 11MS — —Severe-Duty General Purpose Aircraft Grease that meets obsolete MIL - G - 7711A

ROYCO® 22CF MIL - PRF - 81322 G-395A Chromate-Free, Wide Operating Temperature, Multi-Function & General Purpose Grease

ROYCO® 22MS MIL - G - 81827 —Wide-Operating Temperature, High-Load Synthetic Grease

ROYCO® 27 MIL - PRF - 23827 TYPE 1 G-354 Multi-purpose Instrument & Airframe Grease

ROYCO® 43 SAE - AMS - 4343 G-392 Lithium Grease

ROYCO® 44 SAE - AMS - 2518 S-720 Graphite Anti-Seize Compound

ROYCO® 46 MIL - L - 46000 O-158 Semi-Fluid Synthetic Lubricant with Lithium

ROYCO® 49 MIL - DTL - 23549 — Extreme Pressure Grease with MoS2

ROYCO® 64 MIL - G - 21164 G-353 Advanced MoS2 Synthetic Grease

Turbine & Drivetrain Fluids

Today’s aerospace turbine engines serve a life critical role. With such responsibility, ROYCO® Turbine Fluids are developed to deliver performance to a sophisticated industry. At the crossroads of this obligation are decades of technical wherewithal and dedicated manufacturing. You can have confidence in ROYCO® Turbine Fluids, for the most advanced fighters to commercial jets and through to helicopter drivetrains.

Performance Compounds and Greases

ROYCO® Performance Compounds and Greases are semi-solid blends of the latest technology for additives, base fluids and modern thickeners. The delicate balance of these components and the artful science that goes into these mixtures should only be trusted to experienced practitioners of ROYCO® Performance Compounds and Greases. These systems are designed for the most demanding lubrication requirements. From severely loaded gears and extreme pressure sliding surfaces, while exposed to high altitude, corrosive and/or marine environments, ROYCO® Performance Compounds and Greases deliver the needed performance.

8


9


Product Specifications*NATO

DesignationDescription

ROYCO® 308CA MIL - PRF - 32033 O-190 (obsolete)A General Purpose, Lubricating, and Preservative/Water-Displacing Oil

ROYCO® 315 MIL - PRF - 3150 O-192 General Purpose Preservative Lube

ROYCO® 363 MIL - PRF - 7870 0-142Low Temperature, General Purpose & Instrument Lube

ROYCO® 482 MIL - C - 6529 TYPE 2 C-609 Aircraft Piston Engine & Parts Preservative Fluid

ROYCO® 483 MIL - C - 6529 TYPE 3 C-610 Aircraft Turbojet Engine & Parts Preservative Fluid

ROYCO® 581 MIL - C - 6529 TYPE 1 C-608 Preservative CONCENTRATE for Aircraft Engines

ROYCO® 586L MIL - PRF - 6086 GRADE L O-153 Low Temperature Load Carrying Lube

ROYCO® 586M MIL - PRF - 6086 GRADE M O-155 High Temperature Load Carrying Lube

ROYCO® 602 MIL - PRF - 87252 S-1748Hydrolytically Stable Coolant & Dielectric Lubricating Fluid

ROYCO® 634E MIL - PRF - 63460 - E S-758 Advanced Multi-purpose Lubricant

ROYCO® 885 MIL - PRF - 6085 O-147 Low-Volatility Instrument & General Lubricating Fluid

ROYCO® HF-825 — — Assembly Grease

ROYCO® 950 MIL - PRF - 7024 TYPE 2 — Fuel System Calibration Fluid

Specialty Application and Performance Fluids

Today’s aerospace environment is broad and has many needs. The ROYCO® Specialty Application Fluids line brings the most advanced technology and confidence to those needs. From coolant to dielectric protection through to gear and sliding surface lube requirements, ROYCO® Specialty Application Fluids are the solution.

HYDRAULIC FLUIDS

10


11


Royco® SSF

Product Description: Shock Strut Fluid - a mineral based landing gear system and preservative fluid formulated with corrosion inhibition in mind. This fluid is offered in both red and Boeing specified yellow (straw) colors.

Specification: BMS - 3 - 32 - TYPE 1

NATO Specification: N/A

Joint Service Designation: N/A MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years

Tariff Code: 2710.19.3080

Compatibility: (†See page 49.)

Material:

Acrylonitrile

acrylonitrile-butadiene rubber (Perbunan

®)

Butyl rubber

Flurocarbon (Viton®)

Methacrylate

Natural rubber/latex

poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)

Polyvinyl chloride (PVC)

Silicone

Styrene-butadiene or styrene-butadiene rubber

(SBR) or Buna S

Mineral Hydraulic

OilsGood Good

Not Accept-able to Poor

Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor

Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess

10


HYDRAULIC FLUIDS

11


Royco® LGF

Product Description: Landing gear Fluid - a mineral based landing gear system fluid formulated for excellent low-temperature operability. This fluid is offered in both red and Boeing specified yellow (straw) colors.

Specification: BMS - 3 - 32 - TYPE 2


Joint Service Designation: N/A MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


HYDRAULIC FLUIDS

12


13


Royco® 717

Product Description: An additized power transmission hydraulic fluid designed to afford superior corrosion, demulsibility, oxidation and wear performance. Originally designed to meet the US Navy’s strict maritime requirements for ordinance systems - the obsolete MIL-DTL-17111.

Specification: Obsolete (MIL - DTL - 17111)

NATO Specification: H-575

Joint Service Designation: N/A

MIL-SPEC Scope: N/A

Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 5 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


National Stock Number Grade Amount Container

9150-00-290-4091 — 8 oz. Can

9150-00-261-8317 — 5 gal. Can

9150-00-261-8318 — 55 gal. Drum

12


HYDRAULIC FLUIDS

13


Royco® 756

Product Description: “RED OIL” - A super clean, highly refined mineral oil based, hydraulic fluid for operation over wide temperature ranges.

Specification: MIL - PRF - 5606


Joint Service Designation: OM-15 MIL-SPEC Scope: This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54 °C to +135 °C temperature range. This fluid is identified by military symbol OHA and NATO Code No. H-515. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 2 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-252-6383 — 1 quart Can

9150-00-223-4134 — 1 gal. Can

9150-00-082-7524 — 10 gal. Can

9150-00-265-9408 — 55 gal. Drum

HYDRAULIC FLUIDS

14


15


Royco® 757

Product Description: A super-clean, additized, highly refined mineral oil ordinance system hydraulic and preservative fluid that has been designed to be used in across a wide operating temperature threshold. A proprietary development for the advanced features of unmanned aerial vehicles and more.

Specification: N/A


Joint Service Designation: OM-18 MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


14


HYDRAULIC FLUIDS

15


Royco® 783

Product Description: A super clean, mineral based, hydraulic fluid designed with oxidation, corrosion, and anti-wear performance in mind. This is also an excellent preservative fluid.


NATO Specification: C-635

Joint Service Designation: PX-26 MIL-SPEC Scope: This specification covers one grade of petroleum base hydraulic fluid that is rust inhibited and used both as a preservative for hydraulic systems and components as well as being an operational fluid. The hydraulic fluid is identified by Military Symbol OHT and NATO Symbol C-635. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-935-9807 — 1 quart Can

9150-00-935-9808 — 1 gal. Can

9150-00-935-9809 — 5 gal. Can

9150-00-935-9810 — 55 gal. Drum

HYDRAULIC FLUIDS

16


17


Royco® 770

Product Description: A super clean, synthetic based, severe-duty, hydraulic fluid demonstrating fire-resistivity and is specifically additized for excellence in corrosion, oxidation and rust inhibition performance.



Joint Service Designation: N/A MIL-SPEC Scope: This specification covers the requirements for one type of synthetic hydrocarbon base hydraulic fluid. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Synthetic Hydraulics Good Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-01-332-7819 Type I 1 pt. Can

9150-00-111-6256 Type I 1 quart Can

9150-00-111-6254 Type I 1 gal. Can

9150-00-111-6255 Type I 5 gal. Can

9150-01-158-0462 Type I 55 gal. Drum

16


HYDRAULIC FLUIDS

17


Royco® 782

Product Description: A super clean, synthetic based hydraulic fluid with suitability for the most extreme operating temperatures. Designed for improved fire-resistivity.



Joint Service Designation: OX-19 MIL-SPEC Scope: This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of -40 °C to +205 °C. This hydraulic fluid is identified by NATO Code Number H-537. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 2 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-149-7431 — 1 quart Can

9150-00-149-7432 — 1 gal. Can

9150-01-009-7709 — 10 gal. Can

9150-00-180-6290 — 55 gal. Drum

WEAPONS CLEANER & PRESERVATIVE LUBES

18


19


Product Description: A synthetic based, lithium stearate thickened semi fluid grease for automatic weapons. Modern additive technology provides corrosion, oxidation, rust inhibition and anti-wear performance.

Specification: MIL - L - 46000

NATO Specification: O-158

Joint Service Designation: N/A MIL-SPEC Scope: This specification covers a semi-fluid lubricant for automatic weapons operating within a temperature range of -54 to +127 °C (-65 to +260 °F). The lubricant is identified by Military Symbol LSA and NATO Code Number O-158. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 2 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic

Ester Based Grease

Poorto

Good

Fair to

Good

Poor to

Fair

Very Good

Poor to

FairPoor Good Poor Poor

Poor to

Fair

Very Good

PoorPoor to

FairPoor


9150-00-935-6597 — 2 fl oz. Bottle

9150-00-889-3522 — 4 fl oz. Bottle

9150-00-687-4241 — 1 quart Can

9150-00-753-4686 — 1 gal. Can

Royco® 46

18


WEAPONS CLEANER & PRESERVATIVE LUBES

19


Royco® 634E

Product Description: An advanced military weapons system lubricant that is engineered for cleaning, lubrication, and preservation of both small and large caliber arms through a wide range of environmental conditions. Technically sophisticated to serve the military and useful in many other demanding lubrication requirements.

Specification: MIL - PRF - 63460 - E

NATO Specification: S-758


MIL-SPEC Scope: This specification describes the performance requirements and verification methods for a type of LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and short-term preservation of small and large caliber military weapons, operating in the temperature range of -51 to +71 °C (-60 to +160 °F).




9150-01-102-1473 — 0.5 fl oz. Bottle

9150-01-079-6124 — 4 fl oz. Bottle

9150-01-054-6453 — 1 pt. Sprayer

9150-01-327-9631 — 1 liter Sprayer

9150-01-053-6688 — 1 gal. Bottle

TURBINE & DRIVETRAIN FLUIDS

20


21


Royco® 481

Product Description: A mineral oil based fluid blended for improved low-temperature and oxidation performance. An excellent choice for fuel system and parts storage and is often used for “air show smoke.”

Specification: MIL - PRF - 6081 GRADE 1010


Joint Service Designation: MK-8 (OM-10 - obsolete) MIL-SPEC Scope: This specification covers the requirements for two grades of jet engine lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Turbine Oils Good Good


Very Good

GoodPoor to

FairGood

Poor to

Good

Fair to

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


9150-00-273-2388 Grade 1010 1 quart Can

9150-00-273-8807 Grade 1010 1 gal. Can

9150-00-231-6676 Grade 1010 55 gal. Drum

20



21


Royco® 500

Product Description: A synthetic ester-based, broad application, 5 cSt turbine engine oil that is blended for strong oxidative and thermal stability performance.

Specification: MIL - PRF - 23699 STD


Joint Service Designation: OX-27

MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156.




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Synthetic Turbine Oils

Poorto

Good

Poorto

Good

Poorto

Fair

Very Good

Poorto

FairPoor Good Poor Poor Good

Very Good

PoorPoor to

FairPoor


9150-01-476-1075 Class STD 8 fl oz. Can

9150-01-476-1074 Class STD 1 quart Can

9150-01-476-1063 Class STD 55 gal. Drum


22


23


Product Description: A synthetic-based, 5 cSt turbine engine oil that is formulated for excellent load carrying capacity - making it the premier fluid for use in many helicopter turbines, transmissions and gearboxes.

Specification: DOD - PRF - 85734


Joint Service Designation: OX-26 MIL-SPEC Scope: This specification covers the requirements for one grade of a synthetic base helicopter transmission system lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Poorto

Good

Poorto

Good

Poorto

Fair

Very Good

Poorto


Very Good

PoorPoor to

FairPoor


9150-01-209-2684 — 1 quart Can

9150-01-210-1938 — 1 gal. Can

9150-01-209-3399 — 55 gal. Drum

Royco® 555

22



23


Royco® 560

Product Description: An advanced, high performance, 5 cSt synthetic based turbine engine oil that is engineered for engine cleanliness while providing for excellent thermal and oxidative stability performance.

Specification: MIL - PRF - 23699 HTS


Joint Service Designation: OX-27

MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156.




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Poorto

Good

Poorto

Good

Poorto

Fair

Very Good

Poorto


Very Good

PoorPoor to

FairPoor


9150-01-439-0764 Class HTS 8 fl oz. Can

9150-01-439-0756 Class HTS 1 quart Can

9150-01-439-2070 Class HTS 55 gal. Drum


24


25


Product Description: A synthetic ester-based low-viscosity oil that is designed for excellent performance in turbo-prop and turbo-jet engines.

Specification: MIL - PRF - 7808 GRADE 3

NATO Specification: OX-9

Joint Service Designation: AN-0-3 MIL-SPEC Scope: This specification covers the requirements for two grades of aircraft turbine engine lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Poorto

Good

Poorto

Good

Poorto

Fair

Very Good

Poorto


Very Good

PoorPoor to

FairPoor


9150-00-108-5359 Grade 3 8 oz. Can

9150-00-782-2627 Grade 3 1 quart Can

9150-00-270-4057 Grade 3 1 gal. Can

9150-00-782-2679 Grade 3 55 gal. Drum

Royco® 808

24



25


Royco® 899

Product Description: A synthetic ester-based, broad application, 5 cSt turbine engine oil that is blended with corrosion inhibition in mind and for strong oxidative and thermal stability performance.

Specification: MIL - PRF - 23699 CI


Joint Service Designation: N/A MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Poorto

Good

Poorto

Good

Poorto

Fair

Very Good

Poorto


Very Good

PoorPoor to

FairPoor


9150-00-180-6266 Class C/I 8 fl oz. Can

9150-00-985-7099 Class C/I 1 quart Can

9150-00-681-5999 Class C/I 55 gal. Drum

26


PERFORMANCE COMPOUNDS & GREASES

27


Product Description: An engineered compound of advanced additives, inorganic gel thickeners, and MoS2 that provides superior performance for high load and sliding surface use under severe operating conditions, broad temperatures and/or corrosive environment.



Joint Service Designation: N/A MIL-SPEC Scope: This specification presents requirements for one type of anti-seize thread compound composed of molybdenum disulfide and petrolatum. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Mineral Grease

Good Good


Very Good

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor

Royco® 1MS

26


27



Royco® 11MS

Product Description: A high load bearing, sliding surface application oriented grease where severe operating conditions include broad temperature ranges and corrosive environments. Designed with exceptional water resistance and load carrying properties make it suitable for use in bogie pivot pins and other landing gear assemblies, actuators, and other airframe applications.

Specification: MIL - G - 7711A


Joint Service Designation: AN-0-3 MIL-SPEC Scope: N/A

Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years


Compatibility: See table on page 51. (†See page 49.)


9150-00-180-6381 — 1.75 lb. Can

9150-00-180-6382 — 6.5 lb. Can

9150-00-180-6383 — 35 lb. Can

28



29


Product Description: A synthetic based multi-purpose grease that has robust performance across operating conditions and needs. Designed to perform against severe loading and high speed applications across a broad operating temperature range.


NATO Specification: G-395

Joint Service Designation: XG-293 (equivalent) MIL-SPEC Scope: This specification covers one grade of general purpose, aircraft grease, NATO Code G-395, formulated to withstand operations at high speeds and a wide temperature range of -54 to 177 °C (-65 to 350 °F). Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 6 YearsNATO 3 Years


Compatibility: See table on page 51. (†See page 49.) National Stock Number Grade Amount Container

9150-00-145-0268 Grade 2 6.5 lb. Can

9150-00-181-7724 Grade 2 8 oz. Tube

9150-00-935-5851 Grade 2 35 lb. Can

9150-00-944-8953 Grade 2 1.75 lb. Can

9150-01-237-7468 Grade 1 120 lb. Drum

9150-01-262-3358 Grade 2 14 oz. Cartridge

9150-01-378-0559 Grade 1 1.75 lb. Can

9150-01-378-0693 Grade 1 6.5 lb. Can

9150-01-378-0744 Grade 1 8 oz. Tube

9150-01-501-5729 Grade 1 12 oz. Tube

9150-01-519-1200 Grade 1 12.5 oz. Cartridge

Royco® 22CF

28


29



Royco® 22MS

Product Description: A clay thickened, synthetic based grease with molybdenum disulfide for use in anti-friction bearings and where superior load carrying and sliding surface protection performance is required.

Specification: MIL - G - 81827



MIL-SPEC Scope: This specification covers the requirements for one grade of grease for use as a lubricant on heavily loaded sliding steel surfaces.

Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic Hydro- carbon Based Grease

Good Good


Very Good

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


9150-00-408-9635 — 1.75 lb. Can

9150-01-345-6449 — 14 oz. Cartridge

30



31


Product Description: Aircraft and instrument, gear bearing, and actuator screw grease. An advanced synthetic ester based grease paired with a lithium stearate thickener and robust additives that impart corrosion, oxidation and rust inhibition for extreme pressure anti-wear properties. This system is designed for highly loaded actuators, gears, and high-speed bearings as well as instruments over broad temperatures.

Specification: MIL - PRF - 23827 TYPE 1


Joint Service Designation: XG-287 MIL-SPEC Scope: This specification covers the requirements for one grade of grease for use at extremely low temperatures on aircraft and instruments. This grease is effective in the temperature range from -73 to 121 °C. The type I grease is identified by NATO code Number G-354. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic

Ester Based Grease

Poorto

Good

Fair to

Good

Poor to

Fair

Very Good

Poor to


Poor to

Fair

Very Good

PoorPoor to

FairPoor


9150-00-935-4017 Type 1 14 oz. Cartridge

9150-00-985-7244 Type 1 4 oz. Tube

9150-00-985-7245 Type 1 8 oz. Tube

9150-00-985-7246 Type 1 1.75 lb. Can

9150-00-985-7247 Type 1 6.5 lb. Can

9150-00-985-7248 Type 1 35 lb. Can

Royco® 27

30


31



Royco® 43

Product Description: A lithium based grease system used for specific heterogeneous materials applications.

Specification: SAE - AMS - 4343



MIL-SPEC Scope: N/A




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic

Ester Based Grease

Poorto

Good

Fair to

Good

Poor to

Fair

Very Good

Poor to


Poor to

Fair

Very Good

PoorPoor to

FairPoor


9150-00-119-9291 — 2 oz. Tube

9150-00-269-8255 — 1.75 lb. Can

32



33


Product Description: A specialized anti-seize compound that has been formulated to delicately balance electrical conductivity needs with corrosion resistant metal/metal alloy contact suitability.

Specification: SAE - AMS - 2518


Joint Service Designation: ZX-38 MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Good Good


Very Good

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor

Royco® 44

32


33



Royco® 46

Product Description: Semi fluid grease for precision machinery that is synthetic based and thickened with lithium stearate. Modern additive technology provides corrosion, oxidation, rust inhibition and anti-wear performance.

Specification: MIL - L - 46000


Joint Service Designation: XG-485 MIL-SPEC Scope: This specification covers a semi-fluid lubricant for automatic weapons operating within a temperature range of -54 to +127 °C ( -65 to +260 °F). The lubricant is identified by Military Symbol LSA and NATO Code Number O-158. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 2 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic

Ester Based Grease

Poorto

Good

Fair to

Good

Poor to

Fair

Very Good

Poor to


Poor to

Fair

Very Good

PoorPoor to

FairPoor


9150-00-935-6597 — 2 fl oz. Bottle

9150-00-889-3522 — 4 fl oz. Bottle

9150-00-687-4241 — 1 quart Can

9150-00-753-4686 — 1 gal. Can

34



35


Product Description: Mineral oil based grease with an inorganic gel thickener and micro-fine molybdenum disulfide that is compounded with additives to impart oxidation resistance, water washout, and both fresh and salt-water corrosion protection.

Specification: MIL - DTL - 23549


Joint Service Designation: XG-271 MIL-SPEC Scope: This specification covers the requirements for one type and grade of a general purpose molybdenum disulfide grease for extended use at temperatures up to 177 °C (350 °F) and for brief periods of use at temperatures up to 204 °C (400 °F). Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S


Good Good


Very Good

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


9150-00-235-5555 — 6.5 lb. Can

9150-00-823-8047 — 35 lb. Can

9150-00-985-7316 — 1.75 lb. Can

Royco® 49

34


35



Royco® 64

Product Description: A synthetic based grease system that is formulated for outstanding oxidation and water resistance performance over a very broad temperature operating envelope. Designed specifically for heavily loaded sliding surface protection.

Specification: MIL - G - 21164


Joint Service Designation: XG-276

MIL-SPEC Scope: This specification covers the requirements for one grade of low and high temperature molybdenum disulfide grease for use as a lubricant on heavily loaded sliding steel surfaces. This grease is identified by NATO Symbol G-353 Military Symbol GMD.




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Royco® Synthetic

Ester Based Grease

Poorto

Good

Fair to

Good

Poor to

Fair

Very Good

Poor to


Poor to

Fair

Very Good

PoorPoor to

FairPoor

National Stock Number Grade Amount Container9150-00-935-4018 — 14 oz. Cartridge9150-00-754-2595 — 1.75 lb. Can9150-00-223-4004 — 6.5 lb. Can9150-00-965-2003 — 35 lb. Can9150-01-219-1629 — 20 kg. Drum

SPECIALTY APPLICATION & PERFORMANCE FLUIDS

36


37


Product Description: An blend of highly refined hydrocarbons and additives that offers excellent corrosion inhibition, low-temperature fluidity and water displacing capability. Originally designed for the most stringent requirements to maintain the military’s small arms this lubricant will meet the needs of any demanding application/environment where performance is in demand.


NATO Specification: O-190 (obsolete)

Joint Service Designation: OX-18 (obsolete) MIL-SPEC Scope: This specification covers one type and grade of water-displacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil can be applied by dipping, brushing, or by spraying from gas-pressurized cans. The oil is identified by Military Symbol PL-S and NATO Code Number O-190. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-231-6689 — 1 quart Can

9150-00-231-9045 — 1 gal. Can

9150-00-231-9062 — 5 gal. Can

9150-00-281-2060 — 55 gal. Drum

Royco® 308CA

36



37


Royco® 315

Product Description: A highly refined mineral oil-based lubricating oil blended with modern additives for rust and corrosion inhibition and improved water displacing characteristics.



Joint Service Designation: N/A MIL-SPEC Scope: This specification covers one grade of preservative lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-231-2361 — 1 quart Can

9150-00-231-2356 — 5 gal. Can

9150-00-231-2357 — 55 gal. Drum


38


39


Product Description: A general-purpose lubricant for instrument and wide range of airframe components for both military and civilian aircraft. It is suitable for use over a wide temperature range.



Joint Service Designation: OM-12 MIL-SPEC Scope: This specification covers one grade of general purpose, low temperature lubricating oil.




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S

Mineral Hydraulic

OilsGood Good


Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-542-1430 — 4 oz. Can

9150-00-263-3490 — 1 quart Can

9150-00-273-2397 — 1 gal. Can

9150-00-281-9438 — 55 gal. Drum

Royco® 363

38



39


Royco® 482

Product Description: An ashless, anti-corrosion preservative and “fly away” fluid for piston engines. Developed with highly refined petroleum base oils and a finely-tuned additive system Royco® 482 is developed to minimize the effects of ambient humidity and to neutralize acidic moieties from internal combustion engines’ oil oxidation/combustion by-products.

Specification: MIL - C - 6529 TYPE 2



MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.

Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 YearsNATO 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Very Good

GoodPoor to

FairGood

Poor to

Good

Fair to

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


40


41


Product Description: An ashless, anti-corrosion preservative and “fly away” fluid for turbine engines. Formulated with a balanced ashless, anti-corrosion additive system and highly refined petroleum base oils this fluid protects turbine engines by minimizing the effects of ambient humidity and neutralizing acidic oxidation/combustion by-products. This preservative is recommended for gas turbine engines normally lubricated with mineral based fluids.



Joint Service Designation: OX-11 MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Very Good

GoodPoor to

FairGood

Poor to

Good

Fair to

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor

Royco® 483

40



41


Royco® 581

Product Description: A convenient CONCENTRATE of an ashless, anti-corrosion additive system and highly refined petroleum base oils that are designed to protect aircraft engines by minimizing the effects of ambient humidity and by neutralizing acidic oxidation/combustion by-products. Easy to dilute for immediate use and uncompromising protection during short to long term storage. This CONCENTRATE has robust design for added use as a preservative for industrial gasoline/diesel fueled engines, industrial gearboxes and machine tools.



Joint Service Designation: ZX-21

MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.




42


43


Product Description: A low viscosity blend of highly refined mineral oils and additives that achieve strong load carrying capacity and corrosion/oxidation inhibition, all while through a wide temperature operating range. Designed for application in gear boxes and specified helicopter transmissions.

Specification: MIL - PRF - 6086 GRADE L


Joint Service Designation: OEP-30 (equivalent)

MIL-SPEC Scope: This specification covers two grades of petroleum-based lubricating oils for gears. This oil is identified by NATO Code Numbers O-153 and O-155.




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Very Good

GoodPoor to

FairGood

Poor to

Good

Fair to

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


9150-00-265-9417 Grade L 1 gal. Can

9150-00-223-4116 Grade L 5 gal. Can

Royco® 586L

42



43


Royco® 586M

Product Description: A blend of highly refined mineral oils and additives that achieve excellent load carrying capacity and corrosion/oxidation inhibition. A higher viscosity and load carrying capacity than Royco® 586L Lubricating Oil. Designed for application in gear boxes and specified helicopter transmissions.

Specification: MIL - PRF - 6086 GRADE M


Joint Service Designation: OEP-70 MIL-SPEC Scope: This specification covers two grades of petroleum-based lubricating oils for gears. This oil is identified by NATO Code Numbers O-153 and O-155. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Very Good

GoodPoor to

FairGood

Poor to

Good

Fair to

GoodGood

Very Good

Poorto

Good

Poor to

GoodPoor


9150-00-240-2235 Grade M 1 pt. Can

9150-00-223-4130 Grade M 1 gal. Can


44


45


Product Description: A synthetic based coolant engineered for use in avionics and other electronics. Specifically designed for hydrolytic stability and dielectric performance.




MIL-SPEC Scope: This specification describes the characteristics and provides the requirements for a -54 to 200 °C synthetic hydrocarbon fluid for use in electronic applications. This fluid is identified by NATO Code No. S-1748.




Material:

Buna N

Ethylene


FluorosiliFaircone

Nitrile (N

497-70)

Nitrile (N

674-70)

Polyacrylate

Propylene


(SBR) or Buna S

Synthetic Hydrocarbon

FluidPoor Poor Good Good Fair Good Good Poor Poor


9150-01-306-2475 — 1 quart Can

9150-01-304-0885 — 1 gal. (Round)

9150-01-336-7174 — 1 gal. (Oblong)

9150-01-306-2470 — 55 gal. Drum

Royco® 602

44



45


Royco® 634E

Product Description: An advanced military weapons system lubricant that is engineered for cleaning, lubrication, and preservation of both small and large caliber arms through a wide range of environmental conditions. Technically sophisticated to serve the military and useful in many other demanding lubrication requirements.

Specification: MIL - PRF - 63460 - E



MIL-SPEC Scope: This specification describes the performance requirements and verification methods for a type of LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and short-term preservation of small and large caliber military weapons, operating in the temperature range of -51 to +71 °C (-60 to +160 °F).




9150-01-102-1473 — 0.5 fl oz. Bottle

9150-01-079-6124 — 4 fl oz. Bottle

9150-01-054-6453 — 1 pt. Sprayer

9150-01-327-9631 — 1 liter Sprayer

9150-01-053-6688 — 1 gal. Bottle


46


47


Product Description: A synthetic ester based lubricant engineered for some the most advanced aerospace applications - ranging from delicate gyro bearing through high speed bearings to complex electronic equipment. This fluid is formulated with low-volatility in mind as is a great choice general aircraft lubrication.



Joint Service Designation: OX-14 (equivalent) MIL-SPEC Scope: This specification covers one grade of aircraft instrument lubricating oil only. The lubricating oil is identified by military symbol OAI and NATO Code No. 0-147. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years



Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


9150-00-664-6518 — 1.5 oz. Bottle

9150-00-257-5449 — 4 oz. Can

9150-00-223-4129 — 1 quart Can

9150-01-311-5640 — 1 gal. Can

9150-01-018-8959 — 5 gal. Can

Royco® 885

46



47


Royco® HF-825

Product Description: A specially designed system to facilitate assembly of small parts. Designed with a high “tack” to allow parts to temporarily remain in place while being assembled.

Specification: N/A



MIL-SPEC Scope: N/A




Material:

Acrylonitrile


®)

Butyl rubber


Methacrylate


poly (ethylene)

Polyamide (N

ylon)

polychloroprene (N

eoprene®)

Polyester

PTFE (Teflon®)


Silicone


(SBR) or Buna S



Accept-able

GoodPoorto

FairGood

Poorto

Good

Fairto

GoodGood

Accept-able

Poorto

Good

Poor to

GoodPoor


48


49


Product Description: A specialized fractionation of a Stoddard solvent with stabilizing additives to prevent the formation of gums and peroxides for use in the calibration of fuel system components in both reciprocating and gas turbine aircraft engines.

Specification: MIL - PRF - 7024 TYPE 2


Joint Service Designation: N/A MIL-SPEC Scope: This specification covers the requirements for three types of calibrating fluid used in the calibration of aircraft fuel system components. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 2 Years



Royco® 950

48


49


DISCLAIMER


Material Royco® Mineral Oil Based Hydraulic Fluid

Royco® Synthetic Hydraulic Fluid

Acrylonitrile Good Good

acrylonitrile-butadiene rubber (Perbunan®) Good Good

Butyl rubber Not Acceptable - Poor Not Acceptable - Poor

Flurocarbon (Viton®) Acceptable Acceptable

Methacrylate Good Good

Natural rubber/latex Poor - Fair Poor - Fair

poly(ethylene) Good Good

Polyamide (Nylon) Poor - Good Poor - Good

polychloroprene (Neoprene®) Fair - Good Fair - Good

Polyester Good Good

Polytetrafluoroethylene (PTFE or Teflon®) Acceptable Acceptable

Polyvinyl chloride (PVC) Poor - Good Poor - Good

Silicone Poor - Good Poor - Good

Styrene-butadiene or styrene-butadiene rubber (SBR) or Buna S

Poor Poor

† Hydraulic Fluid Material CompatibilityAnderol Specialty Lubricants, a division of Chemtura Corporation, does not make warranty the compatibility of any material with Royco Hydraulic Fluids. A true understanding of material compatibility may only be had after careful consideration of the material’s composition and the intended application’s conditions and performance requirements. Material and equipment manufacturer’s recomenations should be followed.

Mineral Hydraulic Oils - Royco® SSF, LGF, 717, 756, 756A, 757, 783

Synthetic Hydraulic Oils - Royco® 770, 782

APPENDIX

50


51


Turbine Engine Oil Elastomer Material Compatibility


Material Royco® Mineral Turbine Oil

Royco® Synthetic Turbine Oil

Acrylonitrile Good Poor - Good

acrylonitrile-butadiene rubber (Perbunan®) Good Poor - Good

Butyl rubber Not Acceptable - Poor Poor - Fair

Flurocarbon (Viton®) Very Good Very Good

Methacrylate Good Poor - Fair

Natural rubber/latex Poor - Fair Poor

poly(ethylene) Good Good

Polyamide (Nylon) Poor - Good Poor

polychloroprene (Neoprene®) Fair - Good Poor

Polyester Good Good

Polytetrafluoroethylene (PTFE or Teflon®) Very Good Very Good

Polyvinyl chloride (PVC) Poor - Good Poor

Silicone Poor - Good Poor - Fair


Poor Poor

Mineral Turbine Oils - Royco® 481

Synthetic Turbine Oils - Royco® 500, 555, 560, 808, 899

50


51


APPENDIX

Grease Elastomer Material Compatibility


Material Royco® Mineral Oil Based Grease

Royco® Synthetic Hydrocarbon Based

Grease

Royco® Synthetic Ester Based Grease

Acrylonitrile Good Good Poor - Good

acrylonitrile-butadiene rubber (Perbunan®) Good Good Fair - Good

Butyl rubber Not Acceptable - Poor

Not Acceptable - Poor Poor - Fair

Flurocarbon (Viton®) Very Good Very Good Very Good

Methacrylate Good Good Poor - Fair

Natural rubber/latex Poor - Fair Poor - Fair Poor

poly(ethylene) Good Good Good

Polyamide (Nylon) Poor - Good Poor - Good Poor

polychloroprene (Neoprene®) Fair - Good Fair - Good Poor

Polyester Good Good Poor - Fair

Polytetrafluoroethylene (PTFE or Teflon®) Very Good Very Good Very Good

Polyvinyl chloride (PVC) Poor - Good Poor - Good Poor

Silicone Poor - Good Poor - Good Poor - Fair


Poor Poor Poor

Mineral Greases - Royco® 1MS, 11MS, 44, 49

Synthetic Hydrocarbon Based Greases - Royco® 22CF, 22MS

Synthetic Ester Based Greases - Royco® 27, 43, 46, 64

APPENDIX

52


Product to Tariff Code Cross-Reference

Fluid Tariff Code Fluid Tariff Code

ROYCO® LGF 2710.19.3080 ROYCO® 555 3403.99.0000

ROYCO® SSF 2710.19.3080 ROYCO® 560 3403.99.0000

ROYCO® 1MS 2710.19.4000 ROYCO® 581 2710.19.4000

ROYCO® 11MS 2710.19.4000 ROYCO® 586L 2710.19.4000

ROYCO® 22CF 3403.99.0000 ROYCO® 586M 2710.19.4000

ROYCO® 22MS 3403.99.0000 ROYCO® 602 3403.99.0000

ROYCO® 27 3403.99.0000 ROYCO® 634E 3403.99.0000

ROYCO® 43 3403.99.0000 ROYCO® 717 2710.19.4000

ROYCO® 44 2712.00.9020 ROYCO® 756 2710.19.4000

ROYCO® 46 3403.99.0000 ROYCO® 757 2710.19.4000

ROYCO® 49 2710.19.4000 ROYCO® 770 3403.99.0000

ROYCO® 64 3403.99.0000 ROYCO® 782 3403.99.0000

ROYCO® 308CA 2710.19.4000 ROYCO® 783 2710.19.4000

ROYCO® 315 2710.19.4000 ROYCO® 808 3403.99.0000

ROYCO® 363 2710.19.4000 ROYCO® HF-825 3403.99.0000

ROYCO® 481 2710.19.4000 ROYCO® 885 3403.99.0000

ROYCO® 482 2710.19.4000 ROYCO® 899 3403.99.0000

ROYCO® 483 2710.19.4000 ROYCO® 950 2710.11.4500

ROYCO® 500 3403.99.0000

Shelf Life Notes:US Military Type II shelf life items may be retested to conformance with the applicable specification - at which time the material is reapproved for use for another shelf life period. All the products listed herein are classified as Type II.

Commercial The United States Government Defense General Supply Center has defined shelf life or retest periods which are more conservative than those defined by Anderol Specialty Lubricants, a division of Chemtura Corporation.

NATO Defined according to NATO STANAG 3149 (EDITION 9 DATED 2 FEB 2006).

52


North America:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura Corporation215 Merry LaneEast Hanover, New Jersey 07936 Technical Service: +1.973.887.7410 Customer Service: +1.203.573.4595 Fax: +1.203.573.2324 email: [email protected] www.anderol.com

Europe, Middle East and Africa:ANDEROL B.V.P.O. Box 14896201 BL MaastrichtThe NetherlandsTel: +31.43.352.41.90Fax: +31.43.352.41.99email: [email protected]

Mexico and Latin America North:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationCalzada de Guadalupe No. 410, Cuautitlan, Edo. de Mexico Tel: (52 55) 5010 6549 (52 55) 5010 6581 (52 55) 5010 6611 Fax: (52 55) 5010 6565email: PerformanceProducts-Latinoamerica@ chemtura.com www.anderol.com

Latin America South:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationAv. Brasil, 5333 - Distrito Industrial, CEP 13505-600 Rio Claro - SP Tel: +55-19-3522-5000 Customer Care: 0800 970-6082 Fax: +55-19-3527-0955email: PerformanceProducts-Latinoamerica@ chemtura.com www.anderol.com

Asia and the Pacific:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationRoom 1703-1705,No. 1568 Century Avenue, Shanghai 200122 China Tel: +86-21-3866 6688Fax: +86-21-6876 0772email: [email protected]

CONTACT ANDEROL SPECIALTY LUBRICANTS TODAYAnderol Specialty Lubricants, a division of Chemtura Corporation, is your source for the highest quality specialty lubricants. Our customer relationship and technical professionals are ready to assist you with your specific application needs. For additional information on any of our products, call, e-mail, or visit our web site today.

Customer Service: (203) 573-4595 E-mail: [email protected]

Web: www.anderol.com

Product data and Material Safety Data Sheets (MSDS) for our specialty fluids are available upon request.

Anderol Specialty Lubricants markets a wide variety of synthetic and specialty fluids under the ANDEROL® and ROYCO® registered trademarks. These products are used with confidence globally and are designed with leading technology for use in the aerospace & defense, commercial, and industrial markets.

If you would like improved performance from your critical equipment, call us

today. We are pleased to discuss our lubricants, provide additional technical

data, and offer advice on specialty lubrication issues.

WARRANTY: ALL PRODUCTS PURCHASED FROM ANDEROL SPECIALTY LUBRICANTS, A DIVISION OF CHEMTURA CORPORATION AND ITS GLOBAL SUBSIDIARIES ARE SUBJECT TO THE TERMS AND CONDITIONS SET OUT IN THE APPLICABLE SALES CONTRACT, ORDER ACKNOWLEDGEMENT, AND/OR BILL OF LADING. ANDEROL SPECIALTY LUBRICANTS WARRANTS ONLY THAT ITS PRODUCTS WILL MEET ANDEROL’S STANDARD WRITTEN SPECIFICATIONS FOR THE SUBJECT PRODUCT IN EFFECT AT THE TIME OF SHIPMENT OR THE WRITTEN SPECIFICATIONS FOR THE SUBJECT PRODUCT SET OUT IN THE APPLICABLE SALES CONTRACT, ORDER ACKNOWLEDGEMENT, AND/OR BILL OF LADING, AS APPLICABLE. ANDEROL NEITHER MAKES NOR INTENDS, NOR DOES IT AUTHORIZE ANY BUYER, AGENT OR REPRESENTATIVE TO MAKE, ANY OTHER WARRANTIES, EXPRESS OR IMPLIED AND, TO THE EXTENT PERMITTED BY LAW, IT EXPRESSLY EXCLUDES AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL OTHER INFORMATION SUPPLIED BY ANDEROL SPECIALTY LUBRICANTS IS BELIEVED TO BE ACCURATE BUT IS FURNISHED UPON THE EXPRESS CONDITION THAT THE CUSTOMER OR USER SHALL MAKE ITS OWN ASSESSMENT TO DETERMINE THE PRODUCT’S USE AND/OR SUITABILITY FOR A PARTICULAR PURPOSE. NO WARRANTY, OF ANY KIND EXPRESS OR IMPLIED, IS MADE BY ANDEROL REGARDING SUCH OTHER INFORMATION, THE DATE UPON WHICH THE SAME IS BASED, OR THE RESULTS OBTAINED FROM THE USE THEREOF, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY THAT THE PRODUCT SHALL BE MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, OR THAT THE USE OF SUCH OTHER INFORMATION OR PRODUCT WILL NOT INFRINGE ANY PATENT. BEFORE USING ANY CHEMICAL, READ AND ABIDE BY THE TERMS OF ITS LABEL AND MATERIAL SAFETY DATA SHEET.

Authorized Distributor:

ANDEROL Specialty Lubricants - September 2012. ROYCO Aero - 100 - 1MPrinted in U.S.A.

Aerospace and Defense Fluids are proudly brought to you by:

Documents

ROYCO Aerospace & Defense Fluids Reference Guide 2012