Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Rowe pumps owners manual
Models:
RPM2 / B23
RPM2 / K19
ROWE CAFS LLC
PO BOX 300
WASHINGTON, AR. 71862
PHONE # 870-777-9688
FAX # 870-777-9690
EMIAL—[email protected]
WEB—www.cafssystems.com
TABLE OF CONTENTS:
RPM2/B23 spec and info sheet
RPM2/B23 dimensions
RPM2/B23 pump parts diagram
RPM2/B23 pump parts, part numbers and descriptions
RPM2/B23 base drawing and dimensions
B23 remote panel option
RPM2/K19 spec and info sheet
RPM2/K19 dimensions
RPM2/K19 pump parts diagram
RPM2/K19 pump parts, part numbers and descriptions
RPM2/K19 base drawing and dimensions
K19 remote panel option
Pump Warranty info and registration card
PAGE #
1
2
3
4
5
6
7
8
9
10
11
12
13
ROWE RPM2/B23 PERFORMANCE AND SPECS
Engine: Briggs Vanguard 23hp
Air cooled
12 volt electric start with recoil backup
Stainless steel muffler
Pump : Rowe RPM2 pump
Anodized aluminum pump body and volute
Type III class 2 black hard anodized –as per MIL-A-8625F
Brass clearance rings
Bronze impeller, 1” threaded
Ceramic mechanical pump shaft seal
Performance:
175 GPM @ 135 PSI
200 GPM @ 100 PSI
300 GPM @ 25 PSI
Discharge: 4 bolt flange
Suction: Changeable flanges for
3” FNPT / 4” VIC combo flange
3” VIC beveled flange
Base: Powder coated steel, Red
1
ROWE RPM2/B23 DIMENSIONS
18” WIDE
21” LONG
20” TALL
2
A
B C
D E
F G
D H
I
ROWE RPM2-B23 PUMP BREAKDOWN
3
ROWE RPM2-B23 PUMP REF. TO PART NUMBER
REF QTY PART # DESCRIPTION A
B
C
D
E
F
G
H
I
1
4
4
2
1
1
1
1
1
RPU001
RPU004
RPU011
RPU002
RPU005
RPU010
RPB001
RPU009
RPU003
RPM2 PUMP BODY
SS SEALING WASHERS
3/8” X 3-1/4” SS CAP SCREW
BRASS CLEARANCE RING
O-RING, VOLUTE
1-1/2” MECHANICAL SEAL
1” THREADED RPM2 IMPELLER
SS CLAMPING RING
RPM2 VOLUTE
PARTS LISTED BELOW ARE NOT SHOWN ON DIAGRAM.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
-
-
6
3
1
1
RPU006
RPU007
RPU008
RPU012
3152X4
1220
RM0103
O-RING, SUCTION ADAPTOR
3” FNPT / 4” VIC SUCTION ADAPTOR
3” VIC SUCTION ADAPTOR
5/16” X 3/4” SS SOCKET HEAD BOLTS
1/4” BRASS HEX HEAD PLUG
1/4” BRASS DRAIN PLUG
POWDERCOATED STEEL PUMP BASE
4
12-3/4” Center
14-3/4” Overall
17”
Overall
13”
Center
3/8”
Holes
ROWE PUMP B23 STEEL BASE DIMENSIONS
PUMP END
ENGINE END
5
ROWE RPM2/B23 REMOTE PANEL OPTION SPECS
PART # B23RCP
5”
12.25”
A B C
D E
F
G
REF QTY PART # DESCRIPTION A
B
C
D
E
F
G
1
1
1
1
1
1
1
RPU015
RPB003
1078
RPB002
1098
1044
1284
2.5” 0-300 PSI PRESSURE GAUGE
B23 SS REMOTE PANEL, PANEL ONLY
RED LED INDICATOR LIGHT
5FT CHOKE CABLE/CONTROLLER
GREEN LED ENGINE START SWITCH
GREEN LED ON/OFF ROCKER SWITCH
5FT THROTTLE CABLE/CONTROLLER
6
ROWE RPM2/K19 PERFORMANCE AND SPECS
Engine: Kohler 19hp, Model ECH630
Air cooled
Electronic Fuel Injection EFI
12 volt electric start
Low profile air filter
Pump : Rowe RPM2 pump
Anodized aluminum pump body and volute
Type III class 2 black hard anodized –as per MIL-A-8625F
Brass clearance rings
Bronze impeller, 1-1/8” keyed shaft
Ceramic mechanical pump shaft seal
Performance:
100 GPM @ 150 PSI
200 GPM @ 100 PSI
300 GPM @ 25 PSI
Discharge: 4 bolt flange
Suction: Changeable flanges for
3” FNPT / 4” VIC combo flange
3” VIC beveled flange
Base: Powder coated steel, Red
7
ROWE RPM2/K19 DIMENSIONS
19.5” WIDE
22” LONG
22.5” TALL
8
7.5”
Center of
suction to
floor
ROWE RPM2-K19 PUMP BREAKDOWN
A
B C
D
E
F
G
D
H
I
J
K L
M
9
ROWE RPM2-K19 PUMP REF. TO PART NUMBER
REF QTY PART # DESCRIPTION A
B
C
D
E
F
G
H
I
J
K
L
M
1
4
4
2
1
1
1
1
1
1
1
1
1
RPU001
RPU004
RPU011
RPU002
RPU005
RPU010
RPK002
RPK001
RPK005
RPK003
RPK004
RPU009
RPU003
RPM2 PUMP BODY
SS SEALING WASHER
3/8” X 3-1/4” SS BOLT
BRASS CLEARANCE RINGS
O-RING, VOLUTE
1-1/2” MECHANICAL SEAL
BRASS SLEEVE
1-1/8” KEYED RPM2 IMPELLER
1/4” X 1” SS KEY
SS END CAP
7/16” FINE THREAD SS SHAFT BOLT
SS CLAMP RING
RPM2 VOLUTE
PARTS LISTED BELOW ARE NOT SHOWN ON DIAGRAM.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
-
-
6
3
1
1
RPU006
RPU007
RPU008
RPU012
3152X4
1220
RM0103
O-RING, SUCTION ADAPTOR
3” FNPT / 4” VIC SUCTION ADAPTOR
3” VIC SUCTION ADAPTOR
5/16” X 3/4” SS SOCKET HEAD BOLTS
1/4” BRASS HEX HEAD PLUG
1/4” BRASS DRAIN PLUG
POWDERCOATED STEEL PUMP BASE
10
12-3/4” Center
14-3/4” Overall
17”
Overall
13”
Center
3/8”
Holes
ROWE PUMP K19 STEEL BASE DIMENSIONS
PUMP END
ENGINE END
11
REF QTY PART # DESCRIPTION A
B
C
D
E
F
1
1
1
1
1
2
RPU015
RPK
1098
1044
1284
RPK011
2.5” 0-300 PSI PRESSURE GAUGE
K19 SS REMOTE PANEL, PANEL ONLY
GREEN LED ENGINE START SWITCH
GREEN LED ON/OFF ROCKER SWITCH
5FT THROTTLE CABLE/CONTROLLER
LED INDICATOR LIGHT
ROWE RPM2/K19 REMOTE PANEL OPTION SPECS
PART # K19RCP
12
5”
12.25”
A
B
C
D E
F F
ROWE RPM2 WARRANTY POLICY
Rowe CAFS LLC, warrants products of its manufacture to be free from defects in material and workmanship,
under normal use and service, for a period of seven (7) years of usage. Rowe CAFS LLC warrants products to the
original purchaser only. Products used for rental or contracting purposes are warranted for a period of six months
of usage. This limited warranty is effective only if the equipment or apparatus is used as directed, is not subject to
misuse, negligence or accident, and is not altered, treated or repaired by someone other than Rowe CAFS LLC or
its designee. Items not manufactured by Rowe CAFS LLC shall bare only the limited warranties offered by their
respective manufacturers.
This exclusive remedy for breach of this warranty shall be to give Rowe CAFS LLC written notice thereof and to
request a Return Goods Authorization, the buyer will return the non-conforming material to Rowe CAFS LLC
F.O.B. its plant within thirty days after the buyer has received the R.G.A. Thereupon Rowe CAFS LLC at its own
election shall repair or replace the same or repay the price thereof. No proximate, incident, consequential or other
damages shall be recovered.
Rowe CAFS LLC shall not be liable for consequential damages or contingent liabilities including; but not limited
to, loss of life, personal injury, loss of crops, loss due to fire or water property damage, and consequential trade or
other commercial loss arising out of failure of Rowe CAFS LLC products.
Detatch and return the below to activate warranty.
Mail to : ROWE CAFS LLC, PO BOX 300, WASHINGTON, AR. 71862
ROWE CAFS LLC PUMP WARRANTY ACTIVATION CARD
FIRE DEPT / COMPANY NAME :______________________________
CONTACT:_________________________________________________
PHONE:__________________EMAIL:__________________________
ADDRESS__________________________________________________
CITY________________________STATE________ZIP_____________
PUMP MODEL PURCHASED_________________________________
DATE PURCHASED_________________________________________
DATE PLACED INTO SERVICE______________________________
TYPE OF APPARATUS ______________________________________
SIGNATURE_______________________DATE_____________
13