ROTEAMENTO INTER-VLANS USANDO PROTOCOLO DOT1Q

COMANDOS SWITCHSW1#config tSW1(config)#vlan 10SW1(config-vlan)#vlan 20SW1(config-vlan)#exit

SW1(config)#interface fa0/3SW1(config-if)#switchport mode trunkSW1(config-if)#endSW1#

COMANDOS ROTEADORR1#config tR1(config)#interface fa0/0.10R1(config-subif)#encapsulation dot1q 10R1(config-subif)#ip address 192.168.1.1 255.255.255.0R1(config-subif)#interface fa0/0.20R1(config-subif)#encapsulation dot1q 20R1(config-subif)#ip address 192.168.2.1 255.255.255.0R1(config-subif)#interface fa0/0R1(config-if)#no shutR1(config-if)#end

PC1IP: 192.168.1.4 MASCARA: 255.255.255.0GATEWAY: 192.168.1.1

PC2IP: 192.168.2.5 MASCARA: 255.255.255.0GATEWAY: 192.168.2.1