We CanWaterproof

AlmostAnything

The Leader in the Manucacture of Environmentally-safeRoofing & Waterproofing Systems.

Hurricane Tested

Roofs • Walls • Decks • basements • woodBrick & Masonry • Stucco • Underground Applications

Sustainability For The Life Of Your Building

Hydro-Stop LLC1465 Pipefitter StreetCharleston, SC 29405

(800) 739-5566(843) 745-9600

www.hydro-stop.com

United Coatings19011 E. Cataldo Ave

Spokane Valley, WA 99016(800) 541-4383(509) 926-7143

www.unitedcoatings.com

United Coatings6760 S. Clementine Ct.

Tempe, AZ 85283(800) 835-9673(480) 966-8999

www.unitedcoatings.com

900 Day

Roof Temperature, Black Asphalt

1600

High AlbedoCool Reflective

Less Than

1000

PREMIUMCOAT® sustainable roofing and waterproofing system is one of thehighest quality roofing and waterproofing systems available. It is made of the best rawmaterials to form a flexible, U.V. resistant elastomeric compound and is fully reinforcedwith a tough nonwoven polyester fabric which has been designed for roofing and flashingapplications of all types. PREMIUMCOAT® is easy to apply, safe to work with and requires nospecial equipment.When the system is properly installed, by a certified applicator, a 10 yearwarranty is available for specific roofing applications. The warranty can then be extendedevery 10 years under a proper maintenance schedule.

PREM

IUMC

OAT®

SYST

EM

Colors represented are approximate. Please consult your technical representative for specific color samples.

2

TERRA COTTA DESERT SAND WHITE BROWN CHARLESTON GREEN

Factory Mutual approval recognition over insula-tion board, new built-up, existing built-up, metal,and concrete. Please contact technical depart-ment for assistance with specifications.

USES• Metal roof waterproofing

and cooling • Parapet wall waterproofing• Low-sloped roof

waterproofing • Flashing of all types• Concrete waterproofing • Plywood waterproofing• Deck waterproofing • Exterior wall waterproofing

ADVANTAGES & BENEFITS• Sustainable roofing system that saves expensive

removal and disposal cost.• Ultraviolet and Infrared resistant for added

durability.• High Albedo reduces heat and lowers energy costs.• Resistant to acid rain and chemical pollutants,

which protect roof or wall from fallout damage.• Won’t spread flame over noncombustible surfaces.• 100 % adhesion of system to substrate• Wide range of colors provides beautiful

architectural finish.• Meets V.O.C. emissions regulations to eliminate

facility downtime during application.• Nontoxic formulation is safe to install.• Easy application and cleanup. • No special equipment required to install.• 10-year extendable warranty available for roofs,

which means system never has to be torn off.

PREMIUMCOAT®SYSTEM

BATTLESHIP GREY DOVE GREY PATINA GREEN CHARCOAL TINNERS RED 3

TECHNICAL DATAProduct Reinforced Acrylic Elastomeric SystemShelf life and storage conditions 18 months if unopened and stored

between 40°F (4°C) & 90°F (32°C)Density 12.1 lb/galApplication temperature min = 40°F (4°C) to 105°F (41°C) (Ambient)

min =36°F (2°C) to 130°F (51°C) (Surface)Drying time (Touch Dry) 1-4 hours at 77°F (25°C) / 40% humidityFull cure 7 daysTotal thickness 40-45 milsPeak Tensile strength of system (ASTM D-412) 2210 psi (15.24mPa) Elongation: of cured system > 53% Water vapor permeability: (ASTM D-1653) (ASTM D-6083) 3-5 permsFungus resistance: (ASTM-G21) No growth supportedAlgae resistance: (ASTM G-29) No growth supportedFlammability: (ASTM E-108) Class A over noncombustible deckSalt spray test: (ASTM B-117) No effects notedPercent solids 66.9%Low temperature flexibility (ASTM D-522) 180° flexibility; bend at -15°

Substrates Uplift Pressure ResistanceWind uplift Concrete 6,098 psf (292kPa)Protocol (PA 114)Uplift pressure resistance Polyisocyanurate 1,189 psf (56.9kPa)

Smooth surface BUR 2,261 psf (108.3kPa) Granule surface Cap sheet 1,753 psf (83.9kPa)

Accelerated weathering (ASTM G-26) Meets PA 129protocol for 3,600 hours.

5

Above: Before, during and after preparation and waterproofing of historic standing-seam metal roof.

Removal of shingles from old standing-seam metal roof. Historic standing-seam metal roof finished in Tinners Red.Application of FOUNDATIONCOAT and fabric to roof.

PREMIUMCOAT® being installed at paper company to reduce roof temperature and waterproof in Mississippi.

Completed PREMIUMCOAT® system in Tinners Red at Air Force base in Alabama.

Factory Mutual approval recognitionover insulation board, new built-up,existing built-up, metal, and concrete.Please contact technical department forassistance with specifications.

PREM

IUMC

OAT®

SYST

EMMETAL ROOFSMetal roofs exhibit most of their leaking problems at laps, seams, skylights, fasteners and other penetrations. The PREMIUMCOAT® system is used extensively to repair and waterproof commercial, industrial, and historic standing-seam metal roofs.The PREMIUMCOAT® system bonds with any metal surface, providing a permanent watertight solution to any metal roof leakage problem.

Above: Waterproofing of a commercial metal roof.

4

PREMIUMCOAT® system installed for waterproofing and cooling of metal roof and newly installed skylights at moving and storage facility in Hawaii.

STABLERUST primer installed over rust and PREMIUMCOAT® system being installed over laps, seams and fasteners to waterproofcommercial metal roof in Alabama.

PREMIUMCOAT® waterproofing system installed over fiberglass skylight on metal roof.

During After

Above: PREMIUMCOAT® waterproofing and cooling industrial roof at major chemical plant.

PREMIUMCOAT®SYSTEM

PREM

IUMC

OAT®

SYST

EM

7

6

BUILT-UP / MODIFIED BUILT-UP ROOFINGThe greatest enemy for a built up roof is the sun. The sun’s powerful infrared and ultraviolet rays cause heat aging of the built-up systemresulting in the leaching of oils, causing the roof to prematurely dry out and crack. The PREMIUMCOAT® system is used on both newand existing built-up and modified roofs providing a protective barrier between the substrate and the sun’s damaging rays.

Above: PREMIUMCOAT® system being installed as a cap sheet over a new built-up roof to provide protection fromthe sun and heat aging at military base in Alabama.

Above: New built-up roofs with PREMIUMCOAT® as a protective cap sheet built-up roof.

Above: PREMIUMCOAT® system installed over modified Bitimun for cooling and prevention of ultraviolet breakdown in Miami, Florida.

Installation of PREMIUMCOAT® FOUNDATIONCOAT over existing built-up.

Completed PREMIUMCOAT® system installed over built-up roofing at Marine Base in North Carolina.

Built-up roof, before PREMIUMCOAT® system.

PREMIUMCOAT® system installed over existing built-up roofing at school in Georgia. PREMIUMCOAT® FOUNDATIONCOAT system being installed.

After: Completed PREMIUMCOAT® system installed over existing built-up roof at school system in Georgia.

Application o f FOUNDATIONCOAT and fabric over expansion joint and roof deck. Roof and skylights waterproofed with FOUNDATIONCOAT and awaiting application of finish coat.

•1 •2

•3 •4

Before During

After

Above: PREMIUMCOAT® system and TRAFFICCOAT providing a waterproof traffic surface at beach house.

9

CONCRETE ROOFSThe largest concern with waterproofing structural concrete is finding a system which will remain permanently bonded even in hurricane conditions.PREMIUMCOAT® is a fluid applied, fully adhered, breathable system. It is excellent for waterproofing structural concrete, and its bonding ability to both substratesis many times greater than even the most stringent roofing standards. PREMIUMCOAT® forms a monolithic system which will mold to any type of surface and istherefore an excellent means of extending the waterproofing membrane onto any curb, penetration, or parapet wall.

DECKSDecks are most often roofs that you walk on. The PREMIUMCOAT® system is ideal for waterproofing decks because of its ability to flash from deck towall junctions, railings and post. The system is renewable by recoating every five years and if it is damaged it can easily be repaired. TRAFFICCOAT

abrasion resistant coating can be applied over the system to provide a tough, easy-to-clean surface.

Installation of PREMIUMCOAT® system over structural concrete roof at family housing project in Puerto Rico. Above: PREMIUMCOAT® system installed over concrete onhotel roof deck in South Beach, Miami, Florida.

8

PLYWOOD AND

INSULATION BOARDPREMIUMCOAT® is a high-performance, sustainable system for plywood and insulation board. Its superior adhesion characteristics and its inherent ultraviolet andinfrared resistance make it ideally suited for the harshest environments.

above. Installation over plywood roof and decks at Dewees Island Nature Preserve (PREMIUMCOAT® selected for its environmentally friendly formulation, sustainability and hurricane-proof uplift resistance).

Installation of PREMIUMCOAT® FOUNDATIONCOAT system over polysaturate insulation board at military base housing in Guam. Completed PREMIUMCOAT® system installed over insulation board military base housing in Guam.

Above & below: PREMIUMCOAT® system being installed over roof deck, parapet walls and transitions at lumber company.

APPLICATION GUIDELINES

Surface PreparationPower wash and clean all surfaces to be waterproofed.

Priming

Chalking surfaces should be primed with SureBond Primer.Rusty surfaces should be primed with StableRust Primer.Concrete surfaces should be primed with BarrierGuard®.Black EPDM surfaces should be primed with CleanAct Primer.All other surfaces do not require priming..

ApplicationInstall cant strips at all internal corners.Apply a 6” or 12” wide strip of PremiumCoat® FoundationCoat, Fabric, andFoundationCoat over cant strips, cracks and joints such as plywood and insulationboard.Apply the FoundationCoat, Fabric and FoundationCoat all in one step to the areato be waterproofed making sure there are no wrinkles or air pockets. Overlap fabricby 4 inches.Apply the FinishCoat to the treated area in two coats.

Coverage

FoundationCoat = 200 square feet per 5 gal.Fabric 40”= 1000 square feetFinish Coat = 350 square feet per 5 gal. (Includes 2 coats)

Questions? Call Hydro-Stop, Inc. or your Hydro-Stop Representative.

During After

During After

BARR

IERG

UARD

® SY

STEM

BARRIERGUARD® is designed for waterproofing all types of masonry surfaces such as foundation walls, concrete panels,retaining walls and moisture-retaining structures such as gutters, cisterns, and concrete shrubbery boxes. Mixed with water andPortland cement, and fully reinforced with BARRIERGUARD® fabric, it forms a hard-wearing, flexible compound. It is also resistant tostanding water and ideal for subterranean waterproofing.

TECHNICAL DATAStorage conditions................................................................................40°F (4°C) to 95°F (35°C)Shelf life....................................................................................12 months in unopened containersPotlife.................................................................................................20-30 minutes @ 77°F (25°C)Membrane thickness .................................................................................................................60 milsBond strength.......................................................................................................> 550 psi (3.8 mPa)Tensile strength ASTM C-109-85........................................................................330 psi (2.3 mPa)Comprehensive strength ASTM C-109-88..................................................5,690 psi (39.2 mPa)Flexual Strength ASTM 3348-86.....................................................................1835 psi (12.7 mPa)Packaging..................................................................................1 gallon (3.79 L) & 5 gallon (18.9 L)

USES• Abrasion-resistant layer for decks

and walkways• Waterproofing foundation walls• Waterproofing basements• Lining water-retaining structures• Waterproofing shrubbery boxes• Waterproofing shower floors

ADVANTAGES & BENEFITS• Protects masonry surfaces from water damage• Will not peel off like stick-on adhesives• Wear-resistant and hard to damage• Resists ponding water• Extremely U.V. resistant• Resists acid rain and chemical pollutants to

protect from chemical spills and fallout damage• Meets V.O.C. emissions and regulations to

eliminate facility downtime during installation• Nontoxic formulation is safe to apply• Easy application and cleanup• No special training or equipment required to install• 5-year extendable warranty means system never has

to be torn off

Above: Sealing concrete shrubbery box.

BarrierGuard® system installed on CBU foundation, prior to installation of landscaping berm in Sea Island, Georgia.

Application of BarrierGuard® system to CMU foundation. 10

Before: BarrierGuard® system installed inside large concrete planters prior to installation of palm trees.

BarrierGuard® being installed on exterior of basement wall prior to back fill at private residence in North Carolina.

BARRIERGUARD

® SYSTEMAPPLICATION GUIDELINES

Surface PreparationRemove any loose or flaking particles, scale, dirt, rust or scale. Masonrysurfaces need to be dampened first to prevent moisture loss from slurry.

Mixing

Slurry is prepared by mixing (one-part BarrierGuard®, one-part water,and three parts Portland cement). Add BarrierGuard® and water to a clean5- gallon pail and mix with a slow-speed mechanical mixer for about 1minute. Slowly add the Portland cement until a totally homogenous andlump-free slurry is produced. Above 80 degrees it is recommended toadd ice to cool down the slurry mix to prevent premature gelling.

Application

Apply BarrierGuard® slurry to the dampened area and immediatelyimbed the BarrierGuard® Fabric in the wet slurry. Work out any bubblesor creases with the brush. Fully saturate the Fabric from above withmore slurry and allow to dry. Follow with a final coat of BarrierGuard®

slurry. BarrierGuard® Fabric should lap by minimum of four inches.

Coverage

One gallon of BarrierGuard® will make approximately four gallonsof slurry. The slurry will cover approximately 50 square feet of fullBarrierGuard® System that is reinforced with fabric, or 250 squarefeet of single coat priming.

Questions? Call Hydro-Stop, Inc. or your Hydro-Stop Representative.

11

NSF®

Before After

Above: Damaged stucco which has been repaired with FLEXCOAT

FLEX

CO

ATFLEXCOATCrackBridging ElastomericCoatingMasonry, and in particular, stucco, is a major pointof entry for water. This is especially true sincemasonry tends to crack. FLEXCOAT crackbridgingelastomeric is carefully formulated to stay flexibleto handle crack movement and provide a high-quality water seal at the same time. FLEXCOAT keepsthe water out while allowing you the option ofhundreds of colors to match your decor.

Above: Waterproofing over structural concrete.

Waterproofing of synthetic stucco on bank building in South Carolina.

Concrete repair and waterproofing of church. BarrierGuard® and PREMIUMCOAT® also used to protect building envelope.

APPLICATION GUIDELINES

Surface PreparationPower wash and clean all surfaces to be waterproofed.

Priming

Chalking surfaces must be primed with SUREBOND PRIMER.All other surfaces do not require priming.

Application

Apply FLEXCOAT by brush, roller or sprayer at a rate of 180 square feet per gallon.Allow 8 hours to dry before applying a second coat.At least two coats must be applied.

CoverageSUREBOND PRIMER = 300 square feet per gallon.FLEXCOAT = 1 coat... 180 square feet per gallon.

2 coats... 90 square feet per gallon.3 coats... 60 square feet per gallon.

Questions? Call Hydro-Stop, Inc. or your Hydro-Stop Representative. 12

CLEAR

GU

ARD

PLUS

®CLEARGUARD PLUS ® provides a durable, clear protective barrier against oil, water, oil-based dirt, and water-based dirt. Utilizing stateof the art technology, this coating is effective for unpainted masonry. CLEARGUARD PLUS® is easy to apply and doesn’t requirespecialized equipment. Being solvent free, CLEARGUARD PLUS® is safe to work with, and does not emit harmful fumes or odor.

USES

• Water and oil repellent for Mortar,Brick, Stucco, Split-Faced Concrete Block, Concrete, ConcreteBlock, Limestone, Marble, Slate, Tile, Sandstone, Granite, Clay Brick and Terra Cotta

• Oil-based dirt and water-based dirt repellent on vertical and horizontal surfaces

ADVANTAGES & BENEFITS

• Lower surface tension of substrate to repel water, oil, water-based dirt and oil-based dirt

• Bonds to a wide variety of substrates and can easily be used on all typesof masonry and gypsum

• Eliminates or reduces effluorescence • Exceeds NCHRP 244 requirements• Meets SS-W-11OC Federal specifications• Meets V.O.C. emissions regulations making it safe to use and eliminates

facility downtime during application• Nontoxic formulation is safe to install• Easy application and cleanup lowering job costs

Untreated Treated

CLEARGUARD PLUS® being applied to structural concrete office building.

Above: Treated and untreated split-faced block. Notice water-soaked untreated area. Example of water absorbing into split-face concrete block leading to wall problems.

CLEARGUARD PLUS® being applied to exterior brick wall at University of North Carolina at Wilmington.

APPLICATION GUIDELINESSurface PreparationRemove debris, dirt, oil and other latience from substrate by powerwashing andmechanical scraping. Repair any damaged mortar and fill all cracks with appropriatefilling material. (Contact Hydro-Stop technical department with technical questions.)

ApplicationStir ClearGuard Plus® well before use. Apply by brush or low-pressure (pump-up)sprayer. Apply in wet-on-wet fashion allowing product to run down surfaceapproximately 12 inches. Curing time: 72 hours.

CoverageCoverage may vary between 80-400 square feet per gallon depending on porosityof the substrate.

Questions? Call Hydro-Stop, Inc. or your Hydro-Stop Representative.