Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Rodent Housing
www.AllentownInc.com 609-259-7951 © Allentown, Inc. All Rights Reserved
PNC Rack
Rat: PNC System Single Face with Rear Plenums
Specifications:
Installation Options: (opposite side plenums shown for clarity)
*FLOW DETECTORS USED ONLY DURING RACK INSTALLATION
Features: • HEPA filtered supply and exhaust air • Operates in positive or negative pressure at the press
of a button • Microprocessor controlled Blowers • Split platform for maximum visibility • Capacity of 15 or 20 cages • 2000 cm2 / 310 in2 per cage Optional • Bluetooth remote monitoring • Thimble exhaust connection • Same side plenums • Automatic H2O
Rack Size*
Cage Size Supply Airflow
Exhaust Airflow Positive Negative ACH
15 T2000 24 CFM (40.8 m3/hr) 18 CFM @ 0.060 in H2O (30.6 m3/hr @ 14.9 Pa)
30 CFM @ 0.165 in H2O (50.9 m3/hr @ 41.1 Pa)
60
20 T2000 31 CFM (52.7 m3/hr) 23 CFM @ 0.050 in H2O (39.1 m3/hr @ 12.5 Pa)
39 CFM @ 0.175 in H2O (66.3 m3/hr @ 43.6 Pa)
60
Supply Blower / Direct Exhaust
Direct Supply & Exhaust
Supply & Exhaust Blowers (Thimble Connect)
Supply & Exhaust Blowers
Note: a.) Airflow at sea-level b.) Rack weight without blowers, animals, bedding or watering; c.) Airflow tolerance ±10% d.) *Other configurations available
REV 01/2015
Allentown products are highly customizable at the end users request and this data sheet may not reflect the exact parameters specified for a specific project. Allentown recommends that projects that have critical size, airflow, water or electrical needs be handled through approval drawings to insure all critical areas are addressed and have visibility throughout the team including, A&E, MEP and construction persons.
PNC Racks
*FLOW DETECTORS USED ONLY DURING RACK INSTALLATION
Physical Dimensions:
8.274”210mm
11.946”303mm
23.493”597mm
639mm25.150”
24.329”618mm
16.243”413mm
16.614”422mm
Standard design (shown)
Watering SHR
Platform Suspended
Caster 5” (127mm) Diameter
Supply Blower EFS
Exhaust Blower EFE
Rack Dimensions Rack Size 15 20
inches mm inches mm
A 58.88 1495 77.25 1962 B 75.13 1908 77.25 1962 C 33.50 851 34.50 876 D SupplyPAK = 9.25in / 235mm
D ExhaustPAK = 9.25in / 235mm
E 26.38 670 18.38 467 F 15.00 381 29.19 741 G 3.50 89 4.00 102 H 19.13 486 19.13 486 I 14.6 371 14.6 371
Note: Add 3” (76.2mm) to “B” for optional 8” (203.2mm) diameter casters