RI Radiant Industries

Manufacturer & Exporter of:

CW & A2 Rubber Washer of Cable Glands,

PG Type Rubber Washer & PG Plastics

PVC Grommets from 16mm to 50mm Open & Close

Rubber ‘O’ Rings,

Hydraulic Seal Kits,

Endless Rubber Grommet

Silicon Tubes & Profiles

RI Radiant Industrieswww.radiantindustries.net

www.radiantindustries.net

Established in 1978, Radiant Industries is a highly ac-claimed name engaged in the manufacturing, export and supply of quality RUBBER PRODUCTS, PLASTIC and PVC.Our complete in house infrastructures along with our technical abili-ties, honed by experience enabled us to take up and fulfill challenges of developing Rubber Molded Parts. We emphasize on quality and have always linked ourselves with the leading vendors in the country for purchasing raw materials. In order to meet the demands of our clients we have equipped ourselves with latest technologies and in-creased our production. We ensure customer satisfaction with timely delivery of our rubber products along with a continual development program that is oriented towards client's satisfaction.

A1 / A2 Type Rubber Washers for Cable Gland

Application To maintain the IP rating between equipment & ca-ble glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.

Material Nitrite Rubber, Neoprene, & Silicon

Optional Material Natural Rubber, Viton & EPDM.

Size 20 to 90 (S & L)

Rubber Seals available for both External & Internal use

CW Type Rubber Washers for Cable Gland




Size 20 to 90 (S & L)

Double Compression Rubber for External & Internal use

Page 3

PG Type Rubber Washers for Cable Gland




Size PG ( 7 to 48 ) & M (12 to 75 )

Onion Groove Type available for both External & Internal

Marine Type Rubber Washers for Cable Glands

Application To maintain the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.



Size 10 to 65

Marine type rubber washer

Rubber & PVC. Grommet Small sized Custom rubber grommets are engineered for fitting in a different sizes of cables and to provide them insulation and full safety.

Size: 16mm to 50mm (OP & CL)

Double Compression RubberTo maintain the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.Size: CW 20 to 90 (S & L) A2 20 to 90 (S & L)

Radiant Industrieswww.radiantindustries.net

Onion Groove Type RubberSmall sized Custom rubber grommets are engineered for fitting in a different sizes of cables and to provide them insulation and full safety.

Size: PG ( 7 to 48 ) & M ( 12 to 63 )

PG Plastic We produce and export PG type nylon cable glands and PG type metric cable glands. PG type plastic

Size: PG ( 7 to 48 )


Wiping Gland Brass Wiping Glands for use with heat shrinkable power cable terminations. Available complete range as per BS Standards. as per requirements.Size: Type X Y & Z

PG & M Rubber with ‘O’ Ring Very low friction coefficient, Bears the high temperature, and bears the chemical properties. Rubber O-ring, uses in the electric appliance, the automobile, and so on industry.Size: PG 7 to 48 & M 12 to 75

Rubber BellowsLong lasting in quality these rubber bellows protect shafts & moveable joints and enhance the life of wearing parts by checking the penetration of dust particles.

Size: As per requirements

Rubber ‘O’ Ring Our broad ranges of 'O' Rings are extensively used as mechanical seal or gasket. They are designed to be seated in the groove and compressed during the seal.

Size: As per Requirements


Silicon Rubber & Extruded Products We offer a wide range of silicone rubber products, which are resistant to extreme temperatures. These come with features like tensile strength, elongation, tear strength, chemical resistance and othersSize: As per Requirements

'U/V' Seals An axial face contact rubber seal can increase the service life for both bearing and oil seal. Available for type VA VS & VL

Size: NBR Fluor-Carbon and low friction NBR Suitable shaft size.

Rubber Gasket With the help of our well equipped manufacturing unit, we are designing and developing a wide range of Rubber Gasket and Molded articles.Size: As per Requirements

Marine Gland & Dead end Clamp To maintain the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.Size: 10 to 65



Our product range includes Molded & Extruded Rubber Prod-uct, Rubber Bushes for Cable Glands, Rubber Shrouds, Rubber Bellow, ‘O’ Rings, Diaphragms, Oil Seals, Rubber Sheets, Heat Ex-changer Gaskets, Inflatable Seals, Silicone Tubing and many other products.

Some of the salient features that our range exhibits includes: Durability. Requisite Elasticity. Customized Dimensions. Availability in Different Colors.

Industry We Serve We have an in-depth understanding of various industries that help us to develop innovative products for our clients. We are better equipped, to offer the best rubber products that are used in different applications of diverse industries. Our end customers are spread over the following range of industries : Electronic Engineering Pharmaceutical Industry Automotive Industry Hydraulic Industry And Many More.


Rubber ShroudsRound / Square, Hexagonal, Octagonal Bellows as normally used to cover the Piston Rod, Shafts, Ball Screws from dust, Coolant and Metal Chips etc.Size: As per Requirements

RI Radiant Industrieswww.radiantindustries.net

Radiant Industry has two manufacturing units, which is equipped with latest machines and tools that ensure the streamlined production process of molded rubber products and components. Mumbai, Maharashtra Rajkot, Gujarat

Our manufacturing division is spread across an area of 10,000 sq. feet with complete in-house designing facilities to meet unique needs of our clients. It comprises of consistent vulcanization, extrusion and automatic hydraulic press . We have advanced and efficient machinery which enable us to improve our productivity in a considerable less time.

Radiant Industries.136, ABC Govt. Industrial Estate,Charkop, Kandivli (West), Mumbai—400 067,Maharashtra, India

Cont. : Mr. Nimesh Patel Mobile: +9198926 63253Phone: +91-22-2868 4401E-mail: [email protected]

Radiant Rubber Products.Plot No. G-734, Lodhika, G.I.D.C.,

Kalawad Road, Metoda, Dist: Rajkot,

Gujarat, India

Cont. : Mr. Yogesh PatelMobile +9198790 74148

Phone: +91-2827-287124E-mail: [email protected]

Documents

RI Radiant Industries