Revi s io n 3€¦ · Patents & Paten ts Pendi ng The sale of this product does not sel orl herot wise transfer any license or othe r igrhts under any U.S .atPent or other corresponding

Revision 3

Updated: November 12, 2007

Atlanta Attachment Company, Inc.

Confidential And Proprietary Information

The materials contained herein are confidential and proprietary information of Atlanta

Attachment Company. In addition to any confidentiality and non-disclosure obligations that

currently exist between you and Atlanta Attachment Company, your use of these materials

serves as an acknowledgment of the confidential and proprietary nature of these materials

and your duty not to make any unauthorized use or disclosure of these materials.

All materials contained herein are additionally protected by United States Copyright law

and may not be used, disclosed, reproduced, distributed, published or sold without the

express written consent of Atlanta Attachment Company, which consent may be withheld in

Atlanta Attachment Company’s sole discretion. You may not alter or remove any copyright,

trademark or other notice from copies of these materials.

Patents & Patents Pending

The sale of this product does not sell or otherwise transfer any license or other rights

under any U.S. Patent or other corresponding foreign patent.

This equipment is protected by one or more of the following patents:

US patents:4,038,933; 4,280,421; 4,432,294; 4,466,367; 4,644,883; 4,886,005;

5,134,947; 5,159,889; 5,203,270; 5,307,750; 5,373,798; 5,437,238; 5,522,332;

5,524,563; 5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202; 5,865,135;

5,899,159; 5,915,319; 5,918,560; 5,924,376; 5,979,345, 6,035,794

Foreign patents - 2,084,055; 2,076,379; 2,177,389; 2,210,569; 4-504,742; 8-511,916; 9-

520,472; 0,537,323; 92,905,522.6; 95,935,082.8; 96,936,922.2; 5,159,889; 5,203,270.

Other U.S. and Foreign Patents Pending.

Atlanta Attachment Company

362 Industrial Park Drive

Lawrenceville, Georgia 30045

Phone:(770) 963-7369

Fax:(770) 963-7641

Email:[email protected]

© 2006-2007 Atlanta Attachment Company. All rights reserved.

!! I M P O R T A N T!! I M P O R T A N T

It is important to read and understand the information contained within thismanual before attempting to operate the machine. Atlanta Attachment Co., Inc.shall not be held liable for damage resulting from misuse of the informationpresented within, and reserves the right to change the information containedwithin, without prior notification.

Table Of Contents

Safety Precautions .................................................................................................................................1Setup .....................................................................................................................................................2Operating Instructions .........................................................................................................................11Assembly Drawings & Parts Lists ......................................................................................................1511137B76 Main Assembly, Brother B724 ..........................................................................................1711137F11 Main Assembly, Mitsubishi LT2-2210 ..............................................................................1911137P14 Main Assembly, Pfaff 1181 ...............................................................................................211137021 Topstitch Guide Assembly,Brother,Mitsubishi ...................................................................231137069 Topstitch Guide Assembly, Pfaff .........................................................................................251137022 Pivot Assembly, Brother, Mitsubishi ...................................................................................271137063 Pivot Assembly, Pfaff ..........................................................................................................291137043 Photo Sensor Assembly, Brother, Mitsubishi ......................................................................301137073 Photo Sensor Assembly, Pfaff .............................................................................................311137047 Cloth Plate, Brother .............................................................................................................321137058 Slide Plate, Mitsubishi .........................................................................................................331137078 Foot Spring Assembly, Pfaff ................................................................................................341137-PD Pneumatic Diagram .............................................................................................................351137-WD2 Wiring Diagram, Brother .................................................................................................361137-WD4 Wiring Diagram, Mitsubishi ............................................................................................371137-WD5 Wiring Diagram, Pfaff .....................................................................................................38

Safety Precautions

Safety PrecautionsIt is important that the machine operator read this manual and is familiar with all the

functions and safety concerns of the unit before operating.

General

The safety guidelines mentioned in this manual cover the entire product line of Atlanta

Attachment Company. Some warnings and/or instructions may not apply to this particular

unit.

All maintenance should be performed by a qualified service technician.

Electrical

• Electrical connection requires 220vAC, 10 Amp, 50/60 Hz Single Phase

• Disconnect the power source before threading or replacing the needles.

• Disconnect the power source before leaving the machine unattended.

• Disconnect the power source before removing or replacing parts or making adjustments

and/or performing maintenance.

• Disconnect the power source before opening electrical control panels.

Pneumatics

Air supply requires 60 PSI, 14 SCFM avg.

Air Cylinders

• Keep hands away from pneumatic cylinders at all times.

• Disconnect air supply before servicing air cylinders.

Knives

• This machine may utilize knives and/or thread cutters that may activate automatically.

• Keep hands away from knife blades at all times.

• Disconnect power source and air supply before replacing damaged blades.

Sewing Heads

• Keep hands and all other objects away from needles.

• Disconnect power source and air supply before making adjustments to the sewing head,

replacing needles, threads, bobbins, etc.

1137 Technical Manual

1

Setup

Setup


2

Setup


3

Setup


4

Setup


5

Setup


6

Setup


7

Setup


8

Setup


9

Setup


10

Operating Instructions
The 1137 Top Stitcher will top stitch three sides of pocket flaps of various shapes and
sizes. The open side of the pocket flap should be closed to avoid problems.


Turn on power and air. Move the Run/Reset switch to Run, (item 3). The presser foot

raises and the machine should be in the ready to sew position. Load the pocket flap from left

to right under the foot and against the edge guide. The machine will sew the first side, stop,

turn, and sew the second side, and also stop, turn, and sew the third side. At the end of the

third side the machine will stop, undertrim, and position the foot up in preparation for the

next flap. At each turn the edge guide retracts to make room for the corner of the flap.

Forward tack stitches may be necessary to sew to the edge of the flap on the third side.

The retractable edge guide, fully extended, should be flush with the presser foot and the

front edge guide should be aligned with the retractable guide to maintain the correct stitch

margin. The foot may need to be modified to change the margin. When the margin is

changed the edge-sensing eye will need to be moved to hold a square corner.

A square corner is obtained by stopping the needle at the same distance from the edge of

the flap as the distance from the needle to the retractable edge guide, (see figure 1). If

necessary, adjust the front to back position of the lower photocell, item 2, (edge-sensing

eye) to set this distance. Adjust the eye in very small increments until the two distances are

the same. (The eye should be centered on the presser foot.) Square corners are easier to

obtain with a short stitch length. 12 SPI or greater and a maximum of 2600 - 2700 RPM is

recommended. All corners will not be square.


11

Operating InstructionsThe number of slow stitches is determined by the upper eye, item 1, (slow-stitch eye).

Keep the eye close to the foot to keep the number of slow stitches to a minimum. If the

machine does not stop and turn the flap, one of the eyes cannot see the reflective tape.

Adjust as necessary. To keep the photocells in good working order wipe them off with a clean

dry cloth at the beginning of each shift and replace the reflective tape if worn or oily.

On some machines, after a predetermined amount of inactivity (1-3 min.) the foot will

drop and the machine will not run until the Run/Reset switch is cycled. This is a function of

the motor control. Refer to your manual for more information.

Proper guiding of the pocket flap (straight sewing) against the edge guides is

accomplished by several factors. The pressure on the presser foot should be kept at a

minimum. The spring guide, item 4, should apply a small amount of pressure in front of the

presser foot, and the edge guide/loading air jet, item 5, should be adjusted to assist in

loading and help keep the pocket against the edge guides. Some experimentation may be

needed.

At the end of the first and second side, the Pivot Assembly, item 6, rotates out, clamps

the flap, returns to home position, releases the flap, and the machine begins to sew. A

smooth release of the gripper assembly, item 9, is necessary for proper guiding or sewing of

the flap. Adjust the flow controls on the pivot air cylinder, item 7, so when the Pivot

Assembly rotates it will have a smooth even motion. Adjust the flow control on the gripper

air cylinder, item 8, so the gripper assembly releases smoothly.


12

Both photocells have to be covered to allow the machine to sew in Run and the machine
should not begin to sew until the flap is completely turned. With the Run/Reset switch in

Reset mode cover the reflective tape with a flap. Move the flap to the left and the eye should

sense the reflective tape within 1/8" of the edge guide. Adjust left to right as necessary.

If the Pivot Assembly, item 6, should get out of alignment adjust as follows: With the air

pressure on, set the initial or home position with the two ¼-20 screws, item 10, that hold the

pivot bracket to the rear of the pivot air cylinder. Adjust the home position to allow the notch

in the gripper assembly, item 9, to nest close to but not touch the front edge guide. If the

gripper assembly should need rotating to complete this adjustment loosen the clamp screw,

item 11, on the pivot arm and adjust as necessary. Tighten clamp. With the air pressure off

fully extend the Pivot Assembly, item 6. The gripper assembly should come very close to but

not touch the spring guide. This allows the gripper assembly to rotate very small pocket

flaps.

If the gripper assembly needs tightening align the left side of the notch in the gripper

parallel with the edge guide and tighten the 10-32 hex nut, item 12.

To set the sensitivity on the eyes, should they need it, turn the screw on the left of the

eye counter-clockwise until the red and green lights go off. Then turn clockwise 1/2 turn past

the point that the red and green lights turn on. If they don't respond properly then they

cannot "see" the reflective tape or the tape has gotten dirty or oily and doesn't reflect as it

should. Adjust the eyes or replace the tape as necessary. The screw on top of both eyes should be set to the LON (Light Operated) position.


13



14

Assembly Drawings & Parts Lists


15


The materials contained herein are confidential and proprietary information of Atlanta

Attachment Company. In addition to any confidentiality and non-disclosure obligations that

currently exist between you and Atlanta Attachment Company, your use of these materials

serves as an acknowledgment of the confidential and proprietary nature of these materials

and your duty not to make any unauthorized use or disclosure of these materials.



16



17

11137B76 Main Assembly

Brother B724

1 1137-01 POWER SUPPLY,24V 12 1137-02 CABLE,INPUT 13 1137-04 SOLENOID ASSY,MD-611 14 1137-05 CONTROL BOX ASSY 15 1137-06 CABLE,F/L ADAPTOR 16 1137-LAB LABEL,1137 17 1137-PD PNEUMATIC DIAGRAM AR 358 1137-WD2 WIRING DIAGRAM,BRO AR 369 1137020 BROTHER END COVER 110 1137021 TOPSTITCH GUIDE ASSY 1 2311 1137022 PIVOT ASSY 1 2712 1137029 SPACER,AIR CYL MNT 113 1137030 AIR CYL MNT 114 1137034 END MNT PLATE,BRO-B724 115 1137035 BEARING 116 1137043 PHOTO SENSOR ASSY 1 3017 1137045 BRKT,RESET SWITCH 118 1137047 SLIDE PLATE MOD ASSY 1 3219 141728-0-01M PRESSER BAR SPRING 120 AA198-5102 REGULATOR W/GAUGE 121 AA198RA510 FLOW CONTROL,5/32 222 AA2001F-03 FLOW CONTROL,INLINE 1

23 AAC8DP-3 CYLINDER,AIR,DA 124 AAFBP-8C BRKT,PIVOT,5/32 BORE 125 AAFCT-8 CLEVIS,AIR CYL, 10-32 126 EEFE-RR2 REFLECTIVE TAPE 127 K-230 BOX,METAL, 2X4X2 128 K-231 COVER, 2X4 129 K-235 CONNECTOR,ROMEX,1/2 330 M1B76-001 FOOT,SN,MOD 131 M2B76-001 FEED DOG,SN,MOD 132 M3B76-001 THROAT PLATE MOD 133 NNH10-32 #10-32 HEX NUT 234 NNJ10-32 NUT,JAM,THIN #10-32 135 SSM84-566 SCREW,11/64-40 236 SSSC85032 #6-40 X 1/2 SOC CAP 237 SSSC90080 #8-32 X 1-1/4 SOC CAP 338 SSSC98032 #10-32 X 1/2 SOC CAP 439 SSSC98072 #10-32 X 1-1/8 SOC CAP 240 SSSC98080 #10-32 X 1-1/4 SOC CAP 241 SSZH#10048 SCREW,SHT.METAL HEX 10 642 WWFS10 WASHER, FLAT #10 443 WWL10 #10 LW 6Drawing Number 9000472 Rev. 0

# Part # Description Qty Pg # Part # Description Qty Pg



18



19

11137F11 Main Assembly

Mitsubishi LT2-2210

1 1137-01 POWER SUPPLY,24V 12 1137-02 CABLE,INPUT 13 1137-05 CONTROL BOX ASSY 14 1137-08 CABLE,F/L ADAPTOR 15 1137-09 SOLENOID ASSY,MITS 16 1137-LAB LABEL,1137 17 1137-PD DIAGRAM,PNUEMATIC AR 358 1137-WD4 DIAGRAM, WIRING AR 379 1137021 TOPSTITCH GUIDE ASSY 1 2310 1137022 PIVOT ASSY 1 2711 1137030 AIR CYL MNT 112 1137034 END MNT PLATE 113 1137035 BEARING 114 1137043 PHOTO SENSOR ASSY 1 3015 1137053 SPACER,AIR CYL MNT 116 1137054 END COVER MOD MITS AR17 1137057 NEEDLE PLATE MOD,MITS 118 1137058 SLIDE PLATE MOD ASSY 1 3319 1137060 FEED DOG,MOD 120 1137061 COVER,END 121 141728-0-01M PRESSER BAR SPRING 122 AA198-5102 REGULATOR W/GAUGE 123 AA198RA510 FLOW CONTROL,5/32 2

24 AA2001F-03 FLOW CONTROL,INLINE 125 AAC024DXP CYL,BIMBA,9/16 B,4 S 126 AAFBP-8C BRKT,PIVOT,5/32 BORE 127 AAFCT-8 CLEVIS,AIR CYL, 10-32 128 CCCL3F CLAMP COLLAR- 3/16 129 EEFE-RR2 TAPE,REFLECTIVE 130 K-230 BOX,METAL, 2X4X2 131 K-231 COVER, 2X4 132 K-235 CONNECTOR,ROMEX,1/2 333 M1B76-001 FOOT,SN,NF 134 NNH10-32 #10-32 HEX NUT 235 NNJ10-32 NUT,JAM,THIN #10-32 236 SSFC80024 #6-32 X 3/8 FLAT ALLEN 237 SSSC85032 #6-40 X 1/2 SOC CAP 138 SSSC90080 #8-32 X 1-1/4 SOC CAP 339 SSSC98032 #10-32 X 1/2 SOC CAP 440 SSSC98072 #10-32 X 1-1/8 SOC CAP 341 SSSC98080 #10-32 X 1-1/4 SOC CAP 242 SSZH#10048 SCREW,SHT.METAL HEX 643 WWFS10 WASHER, FLAT #10 444 WWL10 #10 LW 6Drawing Number 9000553 Rev. 0




20



21

11137P14 Main Assembly

Pfaff 1181

1 11200A BUMPER 5/16-24 12 1137-11 SOLENOID ASSY,PFAFF 13 1137-12 CONTROL BOX ASSY 14 1137-14 CABLE,INPUT,PFAFF 15 1137-15 CABLE, POWER, PFAFF 16 1137-16 CABLE, TREADLE, PFAFF 17 1137-LAB LABEL,1137 AR8 1137-WD5 DIAGRAM, WIRING, PFAFF AR 389 1137050 JIG,LINE SCRIBING AR10 1137063 PIVOT ASSY,PFAFF 1 2911 1137068 END MNT PLATE,PFAFF 112 1137069 TOPSTITCH GUIDE ASSY 1 2513 1137073 PHOTO SENSOR ASSY,11371 3114 1137078 FOOT SPRING ASSY 1 3415 1137085 NEEDLE PLATE,PFAFF 116 1137086 FEED DOG,SN 117 1137095 SPACER,AIR CYL MNT 118 1137096 BRKT,CYL MTG 119 1137099 WLDMT,SUPPORT 120 1137102 BRKT,CYL MTG 121 1137104 COVER MODIFICATION 122 AA198-5102 REGULATOR W/GAUGE 123 AA198RA508 FLOW CONTROL,5/32 X 1/8 224 AA198RR508 FLOW CONTROL,5/32 X 1/8 125 AAC6S-1-H CYLINDER,AIR,SA 126 AAC7DP-3 CYLINDER,AIR,DA 1

27 AAFBP-11C BRKT,PIVOT,1/4 BORE 128 AAFCT-7 CLEVIS,AIR CYL, 1/4-28 129 CCCL4F COLLAR,1/4,CLAMP 130 CCCL5F CLAMP COLLAR- 5/16 131 EEFE-RR2 TAPE,REFLECTIVE,1" WIDE .2532 NNH1_4-20 NUT,HEX,1/4-20 233 NNJ1/4-28 1/4-28 HEX JAM NUT 134 NNJ5/16-24 NUT,JAM,5/16-24 135 SPF-1181TSM SEW HEAD,PFAFF W/ TSM 136 SSFCM4X8 M4-0.7 X 8 FLAT ALLEN 237 SSFCM5X10 M5-0.8X10 FLAT ALLEN 238 SSPSM4X10 M4-0.70X10 239 SSSC01032 1/4-20 X 3/4" SOC CAP SC 240 SSSC01040 1/4-20 X 5/8" SOC CAP SC 241 SSSCM5X10 SCREW,SOC CAP,M5 X 14 242 SSSCM5X14 SCREW,SOC CAP,M5 X 14 143 SSSCM6X30 M6-1.0 X 30 SOC CAP 244 SSZH#10064 SCREW,SHT.METAL HEX 10 445 WWFM4.3 WASHER, FLAT, M4 246 WWFM5 WASHER, FLAT, M5 I.D. 347 WWFM6 6MM FLAT WASHER 248 WWFS1/4 WASHER, FLAT, 1/4", SAE 449 WWL1/4 WASHER 1/4 450 WWLM5 M5 LOCK WASHER 351 WWLM6 M6 LOCK WASHER 2Drawing Number 9000675 Rev. 2




22



23

1137021 Topstitch Guide Assembly,Brother,Mitsubishi

1 1137008 CYLINDER MOUNT 12 1137010 GUIDE BAR 13 1137012 MNT,CYLINDER 14 1137014 SUPPORT ARM 15 1137017 SPRING GUIDE 16 1137018 STAT. GUIDE SUPPORT 27 1137019 STATIONARY GUIDE ARM 18 1137038 MNT,GUIDE CYLINDER 19 1137039 NUT PLATE 110 1137055 GUIDE,CYL BLOCK 111 1137056 PLATE,NUT,10-32 112 AA198RR510 FLOW CONTROL,REV 113 AAC8SH-.5A CYLINDER,AIR,SA 114 AACXSM0610 CYLINDER,AIR,DUAL ROD 115 AAQMC-5-10 QUICK MALE, 5/32 X 10-32 216 NNH10-32 #10-32 HEX NUT 1

17 SSBCM3X8 3mm X 8mm BUTTON HEAD 218 SSFC98024 #10-32 X 3/8 FLAT ALLEN 219 SSFC98032 #10-32 X 1/2 FLAT ALLEN 420 SSSC70032 #4-40 X 1/2 SOC CAP 221 SSSC90032 #8-32 X 1/2 SOC CAP 222 SSSC98024 #10-32 X 3/8 SOC CAP 223 SSSC98032 #10-32 X 1/2 SOC CAP 224 SSSC98048 #10-32 X 3/4 SOC CAP 125 SSSC98064 #10-32 X 1 SOC CAP 226 WWF4 WASHER, FLAT #4 227 WWF8 WASHER, FLAT #8 228 WWFS10 WASHER, FLAT #10 729 WWL10 #10 LW 730 WWL4 #4 LW 231 WWL8 #8 LW 2 Rev. 1




24



25

1137069 Topstitch Guide Assembly, Pfaff

1 1137010 GUIDE BAR 12 1137055 GUIDE,CYL BLOCK 13 1137056 PLATE,NUT,10-32X1" CTR 14 1137070 STATIONARY GUIDE ARM 15 1137071 MNT,CYLINDER 16 1137075 STATIONARY GUIDE 17 1137076 CYLINDER MOUNT 18 1137087 GUIDE ADJ 19 AA198RA510 FLOW CONTROL,5/32 1

10 AAC8SH-.5A CYLINDER,AIR,SA 111 NNH10-32 #10-32 HEX NUT 112 SSFC98032 #10-32 X 1/2 FLAT ALLEN 213 SSFCM4X12 M4-0.7X12 FLAT ALLEN 214 SSFCM4X16 M4-0.7 X 16 FLAT ALLEN 115 SSFCM4X8 M4-0.7 X 8 FLAT ALLEN 216 SSSCM4X12 M4-0.7 X 12 SOC CAP 217 WWFM4.3 WASHER, FLAT 4MM 2 Rev. 0




26



27

1137022 Pivot Assembly, Brother, Mitsubishi

1 1137001 LINK TAB 12 1137002 ROD, ST, S/S, 11" L 13 1137003 GRIPPER ASSY 14 1137004 GRIPPER MNT 15 1137006 MNTG BLOCK BEARING 16 1137007 PIVOT ARM 17 1137009 PLATE,GRIP 18 1137033 ROD,SS,.375 19 AA198RR510 FLOW CONTROL,REV 1

10 AAC8SH-.5A CYLINDER,AIR,SA 111 CCCL6F CLAMP COLLAR- 3/8 312 NNK10-32 KEP NUT, 10-32 113 SSSC90032 #8-32 X 1/2 SOC CAP 214 SSSC90048 #8-32 X 3/4 SOC CAP 415 SSSC98032 #10-32 X 1/2 SOC CAP 216 SSSC98040 #10-32 X 5/8 SOC CAP 117 SSSS98032 #10-32 X 1/2 KNURL PT 2 Rev. 1




28



29

1137063 Pivot Assembly, Pfaff

1 1137004 GRIPPER MNT 12 1137065 MNTG BLOCK BEARING 13 1137066 GRIPPER ASSY 14 1137067 PLATE,GRIP 15 1137077 ROD, ST, S/S, 10.25" L 16 1137082 PIVOT ARM 17 1137101 LEVER,ROTATE ARM 18 1137103 ROD,SS,.375 X 3.25 19 AA198RA510 FLOW CONTROL,5/32 1

10 AAC8SH-.5A CYLINDER,AIR,SA 111 NNK10-32 KEP NUT, 10-32 112 SSSC90016 #8-32 X 1/4 SOC CAP 113 SSSC90032 #8-32 X 1/2 SOC CAP 214 SSSC90048 #8-32 X 3/4 SOC CAP 215 SSSC98040 #10-32 X 5/8 SOC CAP 116 SSSS98024 #10-32 X 3/8 KNURL PT 2 Rev. 1




30

1137043 Photo Sensor Assembly, Brother, Mitsubishi

1 1137031 SENSOR BRACKET 12 1137036 SENSOR BRACKET 13 1137037 EYE BKT MNT,MICRO ADJ 14 CCSC21/8 COLLAR,SET,1/8 25 FFGSM2RSN PHOTOCELL REF

6 SSFC80024 #6-32 X 3/8 FLAT ALLEN 27 SSM1454 SCREW,11/64-40 48 SST080064 THUMB SCREW,6-32 X 1 2 Rev. 0




31

1137073 Photo Sensor Assembly, Pfaff

1 1137031 SENSOR BKT,MICRO ADJ 12 1137036 SENSOR BRACKET,MICRO 13 1137074 EYE BKT MNT,MICRO ADJ 14 CCSC21/8 COLLAR,SET,1/8 25 FFGSM2RSN PHOTOCELL,OPTIC,TAKEX REF

6 SSM1454 SCREW,11/64-40 47 SST080064 THUMB SCREW,6-32 X 1 28 WWFS10 WASHER, FLAT #10 4 Rev. 0




32

1137047 Cloth Plate, Brother

1 1137041 SLIDE PLATE 12 AAFJ11 SOFFIE JET & NUT ONLY 1

3 AAQME-5-10 ELBOW,MALE,5/32 1 Rev. 0




33

1137058 Slide Plate, Mitsubishi

1 1137059 SLIDE PLATE 12 AAFJ11 SOFFIE JET & NUT ONLY 1

3 AAQME-5-10 ELBOW,MALE,5/32 1 Rev. 0




34

1137078 Foot Spring Assembly, Pfaff

1 1137079 SPRING GUIDE 12 1137080 FOOT BRKT 13 1137081 FOOT ASSY 14 SSPS70016 #4-40 X 1/4 PAN HD SLOT 2

5 SSSC70012 #4-40 X 3/16 SOC CAP 26 WWL4 #4 LW 4 Rev. 0




35

1137-PD Pneumatic Diagram



36

1137-WD2 Wiring Diagram, Brother



37

1137-WD4 Wiring Diagram, Mitsubishi



38

1137-WD5 Wiring Diagram, Pfaff

Atlanta Attachment Company (AAC)Statement of Warranty

Manufactured ProductsAtlanta Attachment Company warrants manufactured products to be free from defects in material and workmanship for a period of eight hundred (800) hours of operation or one hundred (100) days which ever comes first. Atlanta Attachment Company warrants all electrical components of the Serial Bus System to be free from defects in material or workmanship for a period of thirty six (36) months.

Terms and Conditions:• AAC Limited Warranty becomes effective on the date of shipment.• AAC Warranty claims may be made by telephone, letter, fax or e-mail. All verbal claims must be con-

firmed in writing. • AAC reserves the right to require the return of all claimed defective parts with a completed warranty

claim form.• AAC will, at its option, repair or replace the defective machine and parts upon return to AAC. • AAC reserves the right to make the final decision on all warranty coverage questions. • AAC warranty periods as stated are for eight hundred (800) hours or one hundred (100) days which

ever comes first. • AAC guarantees satisfactory operation of the machines on the basis of generally accepted industry

standards, contingent upon proper application, installation and maintenance.• AAC Limited Warranty may not be changed or modified and is not subject to any other warranty

expressed or implied by any other agent, dealer, or distributor unless approved in writing by AAC in advance of any claim being filed.

What Is Covered• Electrical components that are not included within the Serial Bus System that fail due to defects in

material or workmanship, which are manufactured by AAC are covered for a period of eight hundred (800) hours.

• Mechanical parts or components that fail due to defects in material or workmanship, which are manu-factured by AAC.

• Purchased items (sewing heads, motors, etc.) will be covered by the manufacturer's (OEM) warranty. • AAC will assist in the procurement and handling of the manufacturer's (OEM) claim.

What Is Not Covered• Parts that fail due to improper usage, lack of proper maintenance, lubrication and/or modification.• Damages caused by; improper freight handling, accidents, fire and issues resulting from unauthorized

service and/or personnel, improper electrical, plumbing connections.• Normal wear of machine and parts such as Conveyor belts, "O" rings, gauge parts, cutters, needles, etc.• Machine adjustments related to sewing applications and/or general machine operation.• Charges for field service. • Loss of time, potential revenue, and/or profits.• Personal injury and/or property damage resulting from the operation of this equipment.

Atlanta Attachment Company (AAC)Declaración de Garantia

Productos ManufacturadosAtlanta Attachment Company garantiza que los productos de fabricación son libre de defectos de material y de mano de obra durante un periodo de ochociento (800) horas de operación or cien (100) dias cual llega primero. Atlanta Attachment Company garantiza que todos los componentes del bus serie son libre de defectos de material y de mano de obra durante un periodo de treinta y seis (36) meses.

Términos y Condiciones:• La Garantia Limitada de AAC entra en efecto el dia de transporte. • Reclamos de la Garantia deAAC pueden ser realizados por telefono, carta, fax o correo electrónico.

Todo reclamo verbal tiene que ser confirmado via escrito.• AAC reserva el derecho para exigir el retorno de cada pieza defectousa con un formulario de reclamo

de garantia.• AAC va, según su criterio, reparar o reemplazar la máquina o pieza defectuoso devuelto para AAC. • AAC reserva el derecho para tomar la decisión final sobre toda question de garantia.• Las garantias de AAC tiene un validez de ococientas (800) horas o cien (100) dias cual llega primerlo. • AAC garantiza operación satisfactoria de sus máquinas en base de las normas aceptadas de la indus-

tria contigente en la instalación y mantenimiento adecuada.• La garantia de AAC no puede ser cambiado o modificado y no está sujeto a cualquier otra garantia

implicado por otro agente o distribuidor menos que sea autorizado por AAC antes de cualquier rec-lamo.

Lo Que Está Garantizado• Componentes eléctricos que no está incluidos dentro del sistema Bus Serie que han sido manufactura-

dos por AAC son garantizados por un periodo de ochocientas (800) horas.• Mechanical parts or components that fail due to defects in material or workmanship, which are manu-

factured by AAC. • Componentes comprados (Motores, Cabezales, ) son protegidos debajo de la garantia del fabricante.• AAC asistirá con el manejo de todo reclamo de garantia bajo la garantia del fabricante.

Lo Que No Está Garantizado• Falla de repuestos al raiz de uso incorrecto, falta de mantenimiento, lubricación o modificación.• Daños ocuridos al raiz de mal transporte, accidentes, incendio o cualquier daño al resultado de servi-

cio por personas no autorizados o instalaciones incorrectas de conecciones eléctricas o neumáticas. • Desgaste normal de repuestos como correas, anillos de goma, cuchillos, agujas, etc. • Ajustes de la máquina en relación a las aplicaciones de costura y/o la operación en general de la

máquina.• Gastos de reparaciones en el campo. • Pérdida de tiempo, ingresos potenciales, y/o ganancias. • Daños personales y/o daños al propiedad al resultado de la operacion de este equipo.

© 2007 Atlanta Attachment Company. All rights reserved.

© 2007 Atlanta Attachment Company. Derechos reservados.

Documents

Revi s io n 3€¦ · Patents & Paten ts Pendi ng The sale of this product does not sel orl herot wise transfer any license or othe r igrhts under any U.S .atPent or other corresponding