RESIN FIBRE DISCS

Effective solution for high removal and low

contact pressure

CERAMIC PLUSInnovative grain technology that results in sharper

grain edges and higher stock removal on high alloyed steels and stainless steel.

Prefix: 580.91...Grit sizes: 36–120

8.500 U/min (rpm)

5.300 U/m

in (r

pm)

Diameter

4.5" / 5" / 7"

7/8"Drill Hole

13.300 /12.250/

Max. rotation speed

rota

tion sp

eed

Max. reco

mm

ende

d

8.300/7.5

00/

Zirconia

Aluminum

OxideCeramic

Standard High-Performance

Features:• Aggressive self-sharpening grain• Microcrystals that produce

sharper grain edges

Advantages:• Long service life• High removal rate• Low contact pressure required• Cool sanding

Applications:• Stainless steel• Steel• Aluminum• Rust resistant, acid resistant and

heat resistant high alloyed steels

PREMIUM ALUMINUM OXIDE

Prefix: 580.1...Grit sizes: 24–120

PREMIUM ZIRCONIAPrefix: 580.01...Grit sizes: 24–80

Diameter

4.5" / 5" / 7"

7/8"Drill Hole

13.300 /12.250/

8.500 U/min (rpm)

Max. rotation speed

rota

tion sp

eed

Max. reco

mm

ende

d

8.300/7.5

00/

5.300 U/m

in (r

pm)

Zirconia

Aluminum

OxideCeramic

Standard High-Performance

Features:Covered with a resin bond coating specially formulated to resist loading, glazing and grain stripping

Applications:Stock removal, finishing & blending, varying work piece substrates, flat surfaces, contour surfaces

Features:Covered with a resin bond coating

specially formulated to resist loading, glazing and grain stripping

Applications:Stock removal, finishing & blending,

varying work piece substrates, flat surfaces, contour surfaces,

stainless - cobalt titanium, general purpose grinding ferrous and non-

ferrous metals, fibreglass, wood

Printed in Canada. All rights reserved. May not be reproduced, in part or in whole, without prior co

nsent.

Würth Canada Limited/Limitée345 Hanlon Creek Boulevard

Guelph, Ontario, CanadaN1C 0A1

T (905) 564-6225F (905) 564-3671

info@wurth.ca

SHOP.WURTH.CA

Centre Nut for Resin Fibre Discs715.58

5/8" - 11 centre locking nut for usewith Air Cooled Backing Pads

Backing Pads – Air Cooled for Resin Fibre Discs586.700...• Air Cooled• Easy to assemble• Max. RPM: 13,000• Cools the disc while grinding

Recommended Products