Upload
doankien
View
217
Download
0
Embed Size (px)
Citation preview
Consider: Allowing paint to properly dry between steps makes this a multi-day job. Make sure you plan your schedule accordingly.
©2017 Benjamin Moore & Co. Advance, Benjamin Moore, Paint Like No Other and the triangle “M” symbol are registered trademarks licensed to Benjamin Moore & Co.
REPAINT CABINETS WITH ADVANCE®
Remove doors, drawers and hardware. Removing hinges and pulls gives you the flattest surface to paint.
Find a workspace to paint your doors. You’ll need to leave them in your workspace for extended periods to dry.
Sand lightly. Use a medium grit sandpaper (100- to 150-grit) to roughen up the surface.
Clean surfaces again. Clean any dust o� with a slightly damp cloth.
Prime. Apply Advance Primer and let it dry for 24 hours.
Sand the primer. Lightly sand with 220-grit sandpaper to smooth out drips or pools.
Sand again. Once the paint is fully dry, sand with 220-grit sandpaper. When done, remove any dust with a slightly damp cloth.
Apply second coat. Again, apply Advance paint. Let the paint dry for 24 hours.
21
54
87
1110
24
24
Clean the surfaces. Wipe doors down with a slightly damp cloth.
Cover and tape. Protect adjacent surfaces with tape or a drop cloth.
Apply the first coat. Cut in on uneven surfaces and corners with an angled brush. On flat surfaces, use a foam or microfiber roller. Let the paint dry completely.
See this and other How-To videos at YouTube.com/BenjaminMoore
3
6
9