RELAY Selector Guide

R E L AY

SELECTION

G U I D E

A m e r i c a n Z e t t l e r , I n c .

R e v i s e d

7 / 2 4 / 0 6

FEATURES

EPOXY SEALED

COIL VOLTAGES

COIL POWER AT PICKUPVOLTAGE(typical)

DIELECTRICSTRENGTH(at sea level for 1 min.)

Electrical

Mechanical

APPROXIMATESIZE IN INCHESL X W X H

PCSolder/Plug-inBracket Mount

Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S

At rated load unless otherwisespecified

SERIES

2

High Switching Capacity AC and DC coils Three different mountingoptions

Push To Test lever availableon some models

CE marked

Yes

14 Form C

3PDT, 4PDT:5 A at 30 VDC/250 VACDPDT Standard Duty:

7 A at 30 VDC/250 VACDPDT Heavy Duty:

10 A at 30 VDC/ 250 VACSPDT Heavy Duty:

15 A at 30 VDC/250 VAC

5 thru 110 VDC6 thru 240 VAC

DC:6 to 48 VDC: 576 mW

110 VDC: 704 mWAC:

0.768 VA

Contact to coil:1500 Vrms

Between open contacts:1000 Vrms

Contact Set to Contact Set:1000 Vrms

1 x 105 operations

2 x 107 operations

1.10 x 0.85 x 1.38

THT

XX

X

UL/CUR

Relay Selection Guide

0.61

0.43

0.400.84

0.64

0.581.23

0.940.74

High sensitivity Subminiature size Low cost Meets FCC Part 68.302 and 68.304

Yes

1 Form C

Light duty:1 A at 30 VDC

0.5 A at 120 VACHeavy duty:

2 A at 30 VDC1 A at 120 VAC

5 thru 24 VDC

Standard coils:220 mW

Sensitive coils:100 mW



Standard duty:5 x 105 at 1 A at 30 VDC or 4 x 105 at 0.5 A at 120 VAC

Heavy duty:2 x 105 at 2 A at 30 VDC or 2 x 105 at 1 A at 120 VAC

1 x 107 operations

0.61 x 0.40 x 0.43

THT

UL/CSA

AZ5

Versatile contact configurations

Wide switching range High sensitivity Long life

Yes

16 Form C

2 A at 26 VDCor 115 VAC


7.5 A at 28 VDCor 115 VAC


3 thru 115 VDC

Standard coils:450 to 850 mWSensitive coils:40 mW per pole

(25 mW per pole available)



Contact Set to Contact Set:1000 Vrms

1 x 108 at 10 mA at 6 VDC1.5 x 106 at 2 A at 28 VDC or

115 VAC2 x 105 at 5 A at 28 VDC or

115 VAC1 x 105 at 7.5 A at 28 VDC or

115 VAC5 x 108 operations

2 pole: 0.94 x 0.74 x 1.234 pole: 1.17 x 0.74 x 1.236 pole: 1.40 x 0.74 x 1.23

THTX

X

UL/CUR

AZ420

High sensitivity (110 mW) Class B (130C) insulationstandard

Class F (155C) insulationavailable

VDE versions available Hermetically sealed versionsavailable

Yes

1 Form A, C

Light duty: 2 A at 28 VDC or 300 VACMedium duty: 6 A at 28 VDC or 300 VACHeavy duty: 10 A at 24 VDC or 250 VAC

5 thru 48 VDC



(110 mW available)


Hermetically sealed:1600 Vrms

Between open contacts:750 VrmsLight Duty:

3 x 105 at 3 A at 120 VACMedium Duty:

1.8 x 105 at 6 A at 120 VACHeavy Duty:

1 x 105 at 10 A at 120 VAC

1 x 108 operations

0.84 x 0.64 x 0.58

THT

UL/CUR/VDE

AZ8

1.10

1.38

0.85

AZ164AZ166

3Relay Selection Guide

1.14 0.51

1.0

High dielectric strength, 5000 Vrms

High switching capacity Class B (130C) insulationstandard

Isolation spacing greaterthan 8 mm

Yes

1 Form A, C

TV5 at 120 VAC10A at 277 VAC or 30 VDC resistive

1/3 HP at 250 VAC1/4 HP at 125 VAC NO

3 thru 110 VDC

257 mW



1 x 105 at 10 A at 240 VAC

1 x 107 operations

1.14 x 0.51 x 1.0

THT

X

UL/CUR/TV

AZ697AZ673


Withstands surges up to10,000 volts

High switching capacity inslim package

Yes

1 Form A, C

10 A at 250 VAC10 A at 30 VDC

1/8 HP at 125 VAC1/4 HP at 250 VACTV-5 at 125 VAC

5 thru 48 VDC





Surge contact to coil:10,000 V

1 x 105 at 10 A at 240 VAC

1 x 107 operations

0.97 x 0.41 x 0.99

THT

UL/CUR/TV

0.99

0.970.41 0.51

1.02

1.14

High switching capacity High dielectric strength, 5000 Vrms

Isolation spacing greater than 8 mm

Class B (130C) insulation standard

Yes

2 Form A, C

10 A at 30 VDC or 250 VAC

TV-3 at 125 VAC1/4 HP at 240 VAC1/8 HP at 120 VAC

3 thru 110 VDC

257 mW



Contact set to contact set:3000 Vrms

1 x 105 at 10 A at 240 VAC

1 x 107 operations

1.14 x 0.51 x 1.02

THT

X

UL/CUR/TV

AZ733

0.51

1.02

1.14

1.5 mm contact gap High switching capacity High dielectric strength, 5000 Vrms



Yes

2 Form A

10 A at 250 VAC10 A at 30 VDCTV-3 at 125 VAC

3 thru 60 VDC

450 mW




1 x 105 at 10 A at 240 VAC

5 x 105 operations

1.14 x 0.51 x 1.02

THT

X

UL/CUR/TV

AZ733W

0.470.95

0.98

Dielectric strength, 4000 Vrms

5 Amp switching, doublepole contacts


Yes

2 Form A


TV-3 at 125 VAC

5 thru 48 VDC

300 mW




1 x 105 at 5 A at 240 VAC

1 x 107 operations

0.95 x 0.47 x 0.98

THT

UL/CUR

AZ734

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

4

0.50

0.62

1.14


AC and DC coils Isolation spacing greaterthan 10 mm


Class F (155C) available

Yes

2 Form A, B, C

10 A at 250 VAC8 A at 277 VAC

1/2 HP at 250 VAC1/4 HP at 125 VAC


190 mW




1 x 105 at 8 A at 240 VAC

1 x 107 operations

1.14 x 0.50 x 0.62

THT

X

UL/CUR/VDE

AZ743

1.140.50

0.95





No

1 Form A

16 A at 250 VAC20 A at 125 VAC16 A at 30 VDC

5 thru 48 VDC

340 mW



1 x 105 at 16 A at 240 VAC

1 x 107 operations

1.14 x 0.50 x 0.95

THTQuick connect

UL/CUR/TV

0.50

0.62

1.14



Proof tracking index(PTI/CTI) 250

Surpasses requirements ofVDE 0631/0700

Yes

2 Form A, C

8 A at 250 VAC


DC coil: 200 mWAC coil: 0.422 VA




1 x 105 at 8 A at 240 VAC

3 x 107 operations

1.14 x 0.50 x 0.62

THT

X

UL/CUR/VDE

AZ742 AZ756

0.511.14

1.06

High switching capacity High dielectric strength, 5000 Vrms

Isolation greater than 8 mm Class B (130C) insulation standard


Yes

1 Form A, B, C

20 A at 277 VAC (N.O.)16 A at 240 VAC12 A at 277 VAC1 HP at 240 VACTV8 at 120 VAC20 A at 24 VDC

3 thru 110 VDC

270 mW



5 x 104 at 16 A at 240 VAC2 x 104 at 20 A at 277 VAC

5 x 106 operations

1.14 x 0.51 x 1.06

THT

X

UL/CUR/TV

AZ755

5Relay Selection Guide

0.910.49

0.98

20 Amp switching 10 kV surge Class F (155C) insulationstandard

UL, CUR file E44211

Yes

1 Form A


1.5 HP at 250 VAC

5 thru 24 VDC

245 mW



1 x 105 at 20 A at 250 VAC

1 x 107 operations

0.91 x 0.49 x 0.98

THTQuick connect

UL/CUR

0.73 1.22

1.20

20 Amp switching High in-rush capacity Quick-connects for contacts Class B (130C) insulation standard

No

1 Form A

20 A at 220 VAC1.5 HP at 250 VAC

6 thru 48 VDC

441 mW



1 x 105 at 20 A at 220 VAC

1 x 107 operations

1.22 x 0.73 x 1.20

THTQuick connect

UL/CUR

AZ760

1.140.50

0.62





Yes

1 Form A, B, C

Standard12 A at 277 VAC

Sensitive10 A at 250 VAC

1/2 HP at 250 VAC1/3 HP at 125 VACB300 Pilot DutyR300 Pilot Duty


Standard: 196 mWSensitive: 141 mW



1 x 105 at 12 A at 240 VAC

1 x 107 operations

1.14 x 0.50 x 0.62

THT

X

UL/CUR/VDE

AZ761AZ757

0.52 1.16

0.64





Yes

1 Form A, B ,C

16 A at 277 VAC1 HP at 250 VAC

1/2 HP at 125 VACTV-5 at 125 VAC

(1 Form A)B300 Pilot DutyR300 Pilot Duty


196 mW



1 x 105 at 16 A at 240 VAC

1 x 107 operations

1.16 x 0.52 x 0.64

THT

X

UL/CUR/VDE

AZ762

NEW

AZ762F

0.63

1.240.59

High temperature operation125C

Dielectric strength 5000Vrms

Class F (155C) standard 20 Amp switching Low profile Quick connects(0.618)

Yes

1 Form A, B

20 A at 277 VAC18 A at 250 VAC16 A at 250 VAC12 A at 400 VAC

5 thru 60 VDC

196mW



1 x 105 at 20 A at 277 VAC

1 x 107 operations

1.24 x 0.59 x 0.63

THT

UL/CUR/VDE

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

6

0.400.72

0.59

Small footprint Low cost 10 Amp switching capacity

Yes

1 Form A, C


3 thru 24 VDC

253 mW



1 x 105 at 10 A at 120 VAC

1 x 107 operations

0.72 x 0.40 x 0.59

THT

UL/CUR

AZ765

0.50

0.62

1.14





Yes

1 Form A, C

16 A at 250 VAC

DC coils: 3 thru 110 VDCAC coils: 12 thru 240 VAC

DC coils: 200 mWAC coils: 0.422 VA



1 x 105 at 16 A at 240 VAC

3 x 107 operations

1.14 x 0.50 x 0.62

THT

X

UL/CUR/VDE

AZ764

0.720.41 0.60

Low seated height Low cost Class B (130C) insulation standard

13.5 Amp switching capacity

Yes

1 Form A

13.5 A at 125 VAC10 A at 30 VDC or

277 VAC12 A at 125 VACTV5 at 120 VAC

1/4 HP at 125 / 250 VAC

3 thru 24 VDC

253 mW



1 x 105 at 12 A at 125 VAC

1 x 107 operations

0.72 x 0.60 x 0.41

THT

UL/CUR

AZ766

0.501.14

0.62

High dielectric strength,5000 Vrms




Yes

1 Form A, C

12 A at 250 VAC

DC coils: 3 thru 110 VDCAC coils: 12 thru 240 VAC

DC coils: 200 mWAC coils: 0.422 VA



1 x 105 at 12 A at 240 VAC

3 x 107 operations

1.14 x 0.50 x 0.62

THT

X

UL/CUR/VDE

AZ763

25 Amp switching 80 Amp inrush currentQuick connect and PCBterminals

Flux tight construction Class B (130C) insulation standard

10 kV surge

No

1 Form A

25 A at 277 VAC1 HP at 120 VAC2 HP at 240 VAC

5 thru 48 VDC

441 mW



Contact to coil surge:10,000 V

1 x 105 at 25 A at 277 VAC

2 x 106 operations

QC: 1.20 x 0.63 x 0.93PCB: 1.20 x 0.63 x 1.04

THT

Quick connect

UL/CUR/TV

0.93

1.201.20

0.63

1.04

AZ769

7


Small footprint 5 kV dielectric strength,10 kV surge


8 mm creepage and clearance

Yes

1 Form A, C

1 Form A (N.O.):5 A at 250 VAC

5 A 30 VDC1/8 HP, 125 / 250 VAC

3 A at 250 VAC, 0.4 PF

1 Form C:3 A at 250 VAC3 A at 30 VDC

3 thru 48 VDC




1 x 105 at 5 A at 240 VAC

1 x 106 operations

0.70 x 0.41 x 0.49

THT

UL/CUR/VDE

0.70

0.49

0.41

AZ770 AZ830-4P/AZ830P-4P 4 Pole single side stable and two coil bistable (latching version)

Meets FCC Part 68.302 &68.304

Bifurcated contacts Low profile DIP package High sensitivity (100 MW)

Yes

4 Form C

1 A at 30 VDC0.5 A at 120 VAC

5 thru 48 VDC

Standard coil: 200 mW (single side stable)

Standard coil: 180 mW(bistable)

Sensitive coil: 100 mW (single side stableSensitive coil: 90 mW(bistable)




5 x 105 at 2 A at 30 VDC2 x 105 at 0.5 A at 120 VAC

1 x 108 operations

1.39 x 0.39 x 0.39

THT

UL/CSA

1.390.39

0.39

0.420.39

Low profile for compactboard spacing

DC coils to 48 VDC Single and dual coil latchingversions

Meets FCC Part 68.302 &304

High switching capacity, 60 W, 250 VA

Yes

2 Form C

2 A at 30 VDC2 A at 125 VAC

AZ832: 3 thru 48 VDCAZ832P: 2.25 thru 24 VDC

AZ832: 96 mWAZ832P: 128 mW




1 x 105 at 2 A at 30 VDC or 1 A at 125 VAC

2 x 106 at 1 A 30 VDC or 0.5 A at 125 VAC

2 x 107 operations

0.80 X 0.39 X 0.42

THT

UL/CUR

AZ832/AZ832P

0.740.42

0.61

Small footprint Low cost Class B (130C) insulation standard

10 Amp switching capacity

Yes

1 Form A, C

1 Form A:5 A at 30 VDC/250 VAC

10 A at 125 VAC10 A LRA/1.5 A FLA

at 120 VAC1 Form C:

3 A at 30 VDC or250 VAC

3 thru 48 VDC




1 x 105 at 5 A at 240 VAC

1 x 107 operations

0.74 x 0.42 x 0.61

THT

UL/CUR

AZ767

0.80

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

8

0.550.35

0.20

AZ850/AZ851 Bistable (latching) versionsavailable

Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistancefor low level signal switching

All plastics meet UL94 V-0,30 min. oxygen index

Yes

2 Form C

1 A at 30 VDC0.5 A at 125 VAC

3 thru 48 VDC

Single Side Stable:79-169 mW

Bistable (latching)Single Coil: 56-84 mW

Bistable (latching)Two Coil:113-169mW




1 x 105 at 0.5 A at 125 VAC2 x 105 at 1.0 A at 30 VDC

1 x 108 operations

AZ850: 0.55 x 0.35 x 0.20AZ851: 0.56 x 0.37 x 0.24

THT/SMT

UL/CUR

0.42

0.21

0.28

AZ852/AZ853 Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistancefor low level signal switching

All plastics meet UL94 V-0,30 min. oxygen index

Bistable (latching) versionsavailable

Yes

2 Form C

2.0 A at 30 VDC0.5 A at 125 VAC0.3 A at 110 VDC

1.5 thru 24 VDC

79 mW (3-12 VDC)130 mW (24 VDC)




1 x 105 at 0.5 A at 125 VDC2 x 105 at 1.0 A at 30 VDC

1 x 108 operations

AZ852: 0.42 x 0.28 x 0.21AZ853: 0.42 x 0.35 x 0.22

THT/SMT

UL/CSA

0.80 0.21

0.50

AZ920 Slim SIP package High sensitivity (58 mW) Class B (130C) insulation standard

Class F (155C) available Up to 5 Amp switching ina compact size

Yes

1 Form A


5 thru 24 VDC

5-18 Volt coils: 58 mW24 Volt coils: 88 mW



1 x 105 at 5 A, 30 VDC Res.

2 x 107 operations

0.80 x 0.21 x 0.50

THT

UL/CUR/TV

0.79

0.49

0.43

Dielectric Strength 3000Vrms

8 Amp switching Class B (130C) insulationstandard


Single & Dual coil latchingversions available

Yes

1 Form A, B2 Form A

Form A:8 A at 250 VAC5 A at 30 VDC

Form C:5 A at 250 VAC

5 A 30 VDC

3 thru 24 VDC

192 mW




1 x 105 at 8 A at 250 VDC

1 x 107 operations

0.79 x 0.43 x 0.49

THT

UL/CUR

AZ881

AZ940

9


0.89

0.83

0.91

Two separate relays inone package

Extremely quiet operation Vibration and shock resistant Up to 20 Amp switching ina compact size

ISO/TS 16949, ISO14000

Yes

2X 1 Form C

25 A / 20 A Make/Break2X 1 Form C:

25 A at 20 VDC

12 VDC

203 mW



2 x 105 at 20 A at 14 VDC

1 x 107 operations

0.89 x 0.91 x 0.83

THT

AZ935

0.700.38

0.53

AZ934 Two separate relays inone package

Quiet operation Vibration and shock resistant Up to 20 Amp switching ina compact size

ISO/TS 16949, ISO14000

Yes

1 Form C2X 1 Form C

25 A / 20 A Make/Break 1 Form C:

20 A at 14 VDC2X 1 Form C:20 A at 14 VDC

12 VDC

203 mW



2 x 105 at 20 A, 14 VDC Res.

1 x 107 operations

1 Form C:0.70x 0.38 x 0.53

2 Form C:0.70x 0.67x 0.53

THT

0.610.62

High switching capacity, 10 Amps

4 kV dielectric strength SPST and SPDT versionsavailable

High sensitivity (113 mW)

Yes

1 Form A,C

Form A10 A at 277 VAC5 A at 30 VDC

Form C3 A at 30 VDC / 250 VAC

3 thru 24 VDC




1 x 105 at 10 A at 120 VAC

1 x 107 operations

0.81 x 0.42 x 0.62

THT

0.810.81 0.28

0.60

Extremely small footprint 3 Amp switching inminiature size

High dielectric strength,4000 Vrms

High sensitivity (113 mW)

Yes

1 Form A

3 A at 250 VAC 3 A at 30 VDC

1/10 HP at 250 VAC

4.5 thru 24 VDC

113 mW



1 x 105 at 3 A at 30 VDCor 250 VAC

5 x 106 operations

0.81x 0.28 x 0.60

THT

UL/CUR

AZ939

0.890.65

0.66

High switching capacity Extremely low cost Class B (130C) insulation standard

Class F (155C) available High dielectric strength

Yes

1 Form A, C

16 A at 250 VAC12 A at 28 VDC or 277 VAC

1/3 HP at 125 VAC2 A at 240 VAC Pilot Duty

3 thru 48 VDC

230 mW



1 x 105 at 10 A at 277 VAC

1 x 107 operations

0.89 x 0.65 x 0.66

THT

UL/CUR

AZ942

UL/CUR/VDE

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

10

0.75 0.61

0.62

Low seated height Low cost TV-5 rating Class B (130C) insulation standard

Class F (155C) available Surface Mount available

Yes

1 Form A, C

Form A15 A at 125 VAC10 A at 277 VAC

TV-5 120 VAC1/2 HP at 125 VAC

Form C10 A at 277 VAC

1/2 HP at 125 VAC125 VA at 120 VAC Pilot Duty

5 thru 48 VDC

203 mW


Between open contacts:1000 Vrm

1 x 105 at 10 A at 277 VAC

1 x 107 operations

0.75 x 0.61 x 0.62

THT

UL/CUR/TV

AZ943

0.870.64

0.65

Extremely low cost High switching capacity Class B (130C) insulation standard

Class F (155C) available DC coils to 48 VDC Meets IEEE 587 6 kV lightning surge

Yes

1 Form A, C

Form A10 A at 28 VDC10 A at 277 VAC

Form C7 A at 28 VDC

12 A at 125 VAC

3 thru 48 VDC

230 mW



Contact to Coil Surge:6 kV

1 x 105 at 10 A at 277 VAC

1 x 107 operations

0.87 x 0.64 x 0.65

THT

UL/CUR

AZ942H

0.76

0.61

High performance Low seated height 6 kV surge withstand Flux tight and sealed versionsavailable

Class B insulation (130 C)standard, Class F (155C)available

UL, CUR file E43203

Yes

1 Form A, C

10 A at 120VAC10 A at 24 VDC10 A at 250 VAC15 A at 120 VAC15 A at 24 VDC

5 thru 48

203 mW



1 x 105 at 10 A 120 VAC

1 x 106 operations

0.76 x 0.62 x 0.61

THT

UL/CUR

AZ943H

NEW

0.620.89

0.650.66

High switching capacity, 20 Amps

Extremely cost effective DC coils to 24 VDC For automotive use Class F (155C) standard QS9000, ISO9001, ISO14001 SAE J2544 tested

Yes

1 Form A, C

20 A at 14 VDC

6 thru 24 VDC

220 mW



1 x 105 at 20 A at 14 VDC

1 x 107 operations

0.89 x 0.65 x 0.66

THT

AZ942A

0.49

0.39

0.30

Subminiature size Designed for compact highdensity mounting

High sensitivity (96 mW) Meets FCC Part 68.302 &68.304

Yes

1 Form C

1 A at 30 VDC0.5 A at 125 VAC0.3 A at 60 VDC

1.5 thru 24 VDC




1 x 105 at 0.5A at 120 VAC

1 x 107 operations

0.49 x 0.30 x 0.39

THT

UL/CUR

AZ957

0.41

0.81

0.81

Subminiature size Designed for compact highdensity mounting

High sensitivity (129 mW) Withstands 4 kV surge Class B (130C) insulation standard

Yes

1 Form A, C

Form A5 A at 250 VAC3 A at 30 VDC

Form C5 A/3 A at 250 VAC5 A/3 A at 30 VDC

3 thru 48 VDC




Contact to coil surge:4000 V

1 x 105 at 5 A at 240 VAC

1 x 107 operations

0.81 x 0.41 x 0.81

THT

UL/CUR

AZ961

0.42

0.47

0.62

Subminiature size for high density packaging

High sensitivity (114 mW) Coils to 24 VDC Extremely low cost 5 or 6 pin PC layout Class B (130C) and Class F(155C) available

Yes

1 Form C


3 thru 24 VDC

Standard: 114 mW



1 x 105 at 2 A at 120 VAC

1 x 107 operations

0.62 x 0.42 x 0.47

THT

UL/CUR

AZ954 Subminiature size Coils up to 48 VDC Extremely low cost

Yes

2 Form C

6 A at 30 VDC5 A at 277 VAC6 A at 125 VAC

3 thru 48 VDC

384 mW




1 x 105 at 5 A at 277 VAC

2 x 107 operations

0.85 x 0.63 x 0.65

THT

UL/CUR

AZ946

0.65

0.630.85

11

Relay Selection GuideNEW

High Performance Low seated height Flux tight version Class B insulation (130C) Class F insulation (155C)UL, CUR file E43203

Yes1 Form A, C

Form A15 A at 125 VAC10 A at 277 VAC

TV-5 120 VAC125 VA at 120 VAC

Form C10 A at 277 VAC

1/2 HP at 125 VAC125 VA at 120 VAC

5 thru 48

203 mW



1 x 105 at 10 A 277 VAC

1 x 107 operations

0.76 x 0.62 x 0.61

SMT

UL/CUR

AZ943S

0.610.76

0.62

AZ975/AZ976

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical

APPROXMIATESIZE IN INCHESL X W X H


Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

12

0.700.780.60

0.71

0.63 0.63

20 A switching in compact size

Small footprint Open, covered or sealed Six different contact arrangements available

Vibration and shock resistant ISO/TS 16949, ISO14000 SAE J2544 tested

Yes

1 Form A, B, C, U, V, W

Form A20 A at 14 VDC15 A at 13 VDC

6, 12, 24 VDC

514 mW



1 x 105 at 12 A at 14 VDC

1 x 107 operations

AZ975:0.52 x 0.63 x 0.71

AZ976:0.70 x 0.60 x 0.78

THT

AZ977 Up to 20 Amp switchingcapability

Coils to 24 VDC Class F insulation systemstandard

Vibration and shock resistant Cost effective

No

1 Form A, C

20 A at 14 VDC

6 thru 24 VDC


Contact to coil:1000 VDC

Between open contacts:500 VDC

1 x 105 at 20 A 14 at VAC

1 x 106 operations

.906 x .610 x 1.02

X

X

0.91 0.61

1.02

AZ979 80 Amp contact rating -Super ISO

High operating temperature(85C)

Quick connect terminals QS 9000, ISO9001, ISO14000 Tested in accordance withSAEJ2544

Yes1 Form A, B, C

Form A80 A at 14 VDC

Form B, C60 A at 14 VDC

6 thru 24 VDC

760 mW



1 x 105 at 80 A 14 VDC

1 x 107 operations

1.173 x 1.315 x 1.614

X

X

X

1.62 1.32

0.98

Mini-ISO 40 A contact rating Quick connect terminals Metal or plastic mountingbracket options

Shrouded models Resistor or diode parallel tocoil available

ISO/TS 16949, ISO14000 SAE J2544 tested

Yes

1 Form A, C


Form C 40/30 A at 14 VDC

6, 12, 24 VDC

680 mW



1 x 105 at 40 A at 14 VDC

1 x 107 operations

AZ973:1.03 x 1.03 x 0.93

AZ974:1.00 x 1.00 x 1.00

THT

Quick-Connects X

X

1.030.93

1.03

AZ973/AZ974

1.001.00

1.00

13


AZ986

1.0

1.12 1.12

280-ISO Up to 20 A switching in acompact size

Small footprintShroud model Vibration and shock resistant

Designed for high in-rushapplications (120 A)

No

1 Form A, C


Form C20/10 A at 14 VDC

6, 12 and 24 VDC

534 mW



1 x 105 at 20 A at 14 VDC

1 x 106 operations

0.91 x 0.61 x 1.01

THT

AZ984

0.61

1.01

0.91

80 Amp contact rating High momentary current(500 A)

High operating temperature (85 C)


Yes

1 Form A, B, C


Form B, C60 A at 14 VDC

6 thru 24 VDC

760 mW



1 x 105 at 80 A at 14 VDC

1 x 107 operations

1.14 x 1.14 x 1.10

THT

AZ983

1.14

1.10

1.14

AZ980 80 Amp contact rating -Super ISO

High momentary carry cur-rent (500A)

Quick connect terminals High operating temperature(85 C)

Tested in accordance withSAEJ2544

Yes

1 Form A, B, C

Form A80 A at 14VDC

Form B, C60A at 14 VDC

6 thru 24 VDC

760 mW



1 x 105 at 80 A 14 VDC

1 x 107 operations

1.17 x 1.17 x 0.98

Quick Connect

X

1.171.17

280-ISO 40 Amp contact rating High operating temperature Quick connect terminals Vibration and shock resistant Shrouded weatherproofcover available

Resistor or diode parallel tocoil available

Yes

1 Form A, C


Form C 30 A at 14 VDC

6, 12 and 24 VDC

580 mW



1 x 105 at 40 A at 14 VDC

1 x 107 operations

1.12 x 1.12 x 1.0

X

X

Up to 30 A switching in acompact size

Cost effective Vibration and shock resistant Designed for high in-rushapplications

ISO/TS 16949, ISO14000 SAE J2544 testedDual versions available

Yes

1 Form A, C2 Form A, C

30 A at 16 VDC

10, 12, and 24 VDC

187 mW

Contact to coil:500 VDC

Between open contacts:500 VDC

3 x 105 at 20 A at 14 VDC

1 x 106 operations

0.48 x 0.52 x 0.40

THT

AZ987

0.520.400.48

0.98

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

14

Micro-ISO Up to 30 A Switching in acompact size

Cost effective Vibration and shock resistant Designed for high in-rushapplications

ISO/TS 16949, ISO14000 SAE J2544 tested Dual versions available

Yes

1 Form A, C


Form C20 A (N.O.)/10 A (N.C.) at 12 VDC

12 and 24 VDC


Contact to coil:500 VRMS

Between open contacts:500 VRMS

1 x 105 at 20 A at 12 VDC

1 x 107 operations

0.91 x 0.61 x 0.99

THTX

AZ988

0.99

0.910.61

NEW

1.200.62

0.97

Low cost per switched watt UL 873 spacing Class B (130C) insulation standard


30 A Form C rating Coils to 110 VDC

No

1 Form A, B, C

40 A at 250 VAC (N.O.)30 A at 240 VAC1 HP at 125 VAC2 HP at 240 VAC

5 thru 110 VDC

500 mW



1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.20 x 0.97 x 0.62

THT

Quick-Connects - AZ2120

UL/CUR/VDE

AZ2110/AZ2120 Low cost per switched watt UL 873 spacing Class B (130C) insulation standard



Yes

1 Form A, B, C


5 thru 110 VDC

500 mW



1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.27 x 1.09 x 1.10

THT

UL/CUR/VDE

AZ2100

1.27

1.101.09

Up to 25 A Switching in acompact size

Cost effective Single and dual (twin) relay Vibration and shock resistant Epoxy sealed for automaticwave soldering


Yes

1 Form C2 Form C

25 A at 16 VDCLocked Motor

12 VDC

230 mW

Contact to coil:500 VAC

Between open contacts:500 VAC

1 x 105 at 25 A at 14 VDCLocked Motor

1 x 106 operations

0.56 x 0.29 x 0 .540.56 x 0.56 x 0.54 (Dual)

THT

AZ989

0.55

0.620.570.560.29

0.54

15


1.98

0.751.08

AZ2280 Quick connects for coil &contacts

AC and DC coils available Coils to 277 VAC Class F (155C) standard

Yes

1 Form A, B, C

Form A: 30 A at 277 VAC2 HP at 250 VAC1 HP at 125 VAC

Form B: 15 A at 277 VAC10 A at 28 VDC

Form C: 30/20 A (N.O./N.C.)at 277 VAC

20/10 A (N.O./N.C.) at 28 VDC


DC: 500 mWAC: 1.4 VA



1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.98 x 1.08 x 1.09

Quick-ConnectsX

UL/CUR

1.28

1.10

1.08

AZ2270 Quick connect leads for con-tacts

AC and DC coils available Coils to 277 VAC High dielectric strengthversions available (4000 Vrms)

Class F (155C) standardYes

1 Form A, B, C

Form A: 30 A at 277 VAC2 HP at 250 VAC1 HP at 125 VAC

Form B: 15 A at 277 VAC10 A at 28 VDC

Form C: 30/20 A (N.O./N.C.)at 277 VAC

20/10 A (N.O./N.C.) at 28 VDC




High Strength version:4000 Vrms


1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.28 x 1.08 x 1.10

THT

Quick-Connects

X

UL/CUR

AZ2200

1.25

0.751.06

Low cost per switched watt UL 873 spacing Class B (130C) insulation standard



Yes

1 Form A, B, C


5 thru 110 VDC

500 mW



1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.25 x 1.06 x 0.75

THT

UL/CUR/VDE

AZ2150 Quick connect leads for con-tacts

AC and DC coils available Epoxy sealed versions avail-able

UL Class F (155 C) stan-dard

UL, CUR file E44211

Yes

1 Form A, B, C

30 A at 277 VAC 2 HP at 250 VAC1 HP at 125 VAC

20/60 (FLA/LRA)at 277 VAC


DC:500 mWAC: 1.4 VA

Contact to coil:2500Vrms


1 x 105 at 30 A at 120 VAC

1 x 107 operations

1.27 x 1.08 x 1.09

THT

UL/CUR

1.27 1.08

1.09 0.75

1.89

1.22

Low cost 30 Amp switching 144 Amp inrush current Quick connect terminals Creepage distance morethen 8 mm

UL, CUR file E44211

No

1 Form A

Form A: 30 A at 250 VAC2 HP 125/250 VACTV-15 at 120 VAC

3 thru 60 VDC

588 mW


Between open contacts1200 Vrms

1 x 105 at 30 A 240 VAC

1 x 107 operations

1.40 x 1.30 x 0.25

Quick-ConnectsX

UL/CUR

AZ2310

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

16

NEW

1.88

2.370.57

100 Amps switching Heavy loads to 24000 VA 4 kV dielectric Meets 8 mm creepage Mechanical position indicatorwhich may be also used formanual operation or to actuate a micro-switch

Latching

No

1 Form A

96 A at 250 VAC

6, 12 and 24 VDC

Single Coil: 1.44 WDual Coil: 2.88 W



1 x 105 at 50 A 250 VAC

1 x 106 operations

2.37 x 0.57 x 1.88

AZ2510

1.32

1.99

1.85

High in-rush capability Quick-connects Class B (130C) insulationstandard

Screw terminal available Standard (2.4 mm) and widecontact gap (3.0 mm) available

AC and DC coils available Class F (155C) insulationavailable

No

1 Form X (SPST)2 Form X (DPST)30 A at 277 VAC

1.5 HP at 120 VAC3 HP at 240 VACTV-10 at 120 VAC


DC: 1.08 WAC: 1.2 VA



1 x 105 at 30 A 120 VAC

1 x 106 operations

AZ2700: 1.99 x 1.32 x 1.85AZ2701: 2.07 x 1.32 x 2.09AZ2702: 2.03 x 1.37 x 1.42AZ2703: 2.03 x 1.37 x 1.42

AZ2704 x 1.99 x 1.32 x 1.42THT

Quick-ConnectsX

UL/CUR/TV

AZ2700AZ2705

0.641.51

1.20

Heavy loads to 15000 VA 4 kV dielectric 60 Amp switching Epoxy sealed constructionavailable

Latching

Yes

1 Form A

60 A at 250 VAC

5 thru 48 VDC

Single coil: 486 mWDual coil: 980 mW



1 x 105 at 40 A at 250 VAC

1 x 106 operations

1.51 x 0.64 x 1.20

THT (coil only)

UL/CUR

AZ2501AZ2500 Low cost 50 Amp switching Heavy loads to 13850 VA 4 kV dielectric Manual switch available Epoxy sealed versionavailable

UL, CUR file pending

Yes

1 Form A, C

50 A at 277 VAC5 HP at 240 VAC20 A at 240 VAC

6 thru 48 VDC

Single coil: .96 WDual coil: 1.9 W



1 x 105 at 40 A at 250 VAC

1 x 106 operations

1.51 x 0.64 x 1.20

THT

UL/CUR

1.55

1.20

0.61

17


High Sensitivity, 120 mW Proof tracking index(PTI/CTI) 250


10 Amp switching capability UL, CUR file E43203VDE file 40010953

Yes

1 Form A 1 Form C 2 Form C

10 A at 250 VAC10 A 30 VDC

5 A at 250 VAC

5 thru 60 VDC

120 mW




1 x 105 at 8 A at 250 VAC

3 x 107 operations

1.12 x 0.39 x 0.49

THT

UL/CUR/VDE

0.39

0.49

1.12

AZ6962

1.13

0.490.41

10 Amp switching capability High sensitivity, 120 mWpickup


Class B (130C) insulationstandard, Class F available


Yes

1 Form A, C

10 A at 250 VAC8 A at 30 VDCB300 Pilot DutyR300 Pilot Duty

1/4 HP at 125 VAC1/2 HP at 250VAC

5 thru 60 VDC

120 mW



3 x 105 at 8 A at 240 VAC

1 x 107 operations

1.13 x 0.41 x 0.49

THT

UL/CUR/VDE

AZ6961

2.69

1.49

1.36

30 Amp switching capability DPST-N.O. and DPDT configuration

Meets 8 mm creepage, 4000 Vrms dielectric

Class F (155C) insulationstandard

Yes

2 Form A, C

30 A at 277 VAC (N.O.)1 HP at 120 VAC (N.O.)

2.5 HP at 240 VAC (N.O.)3 A at 277 VAC (N.C.)






1 x 105 at 30 A at 120 VAC

5 x 107 operations

AZ2800:2.69 x 1.36 x 1.49

AZ2850:2.06 x 1.36 x 1.20

THT (AZ2850)Quick-Connects: AZ2800

AZ2800

UL/CUR

AZ2800/AZ2850 AZ6951

0.69

0.48

0.25

Small footprint utilizing only0.18 sq inch

High sensitivity Epoxy sealed for automaticwave soldering & cleaning

Thin vertical profile only0.25 wide

UL/CUR File E43203

Yes

1 Form A

5 A at 30 VDC resistive5 A at 250 VAC general use

5 thru 24 VDC

100 mW



1 x 105 at 5 A at30 VDC or 250 VAC

2 x 107 operations

0.69 x 0.25 x 0.48

THT

UL/CUR

0.39

0.45

0.80

Low profile Bifurcated contacts Meets FCC Part 68.302 &68.304

Fits standard 16-Pin IC socket

Ultra-sensitive, 84 mW pickup

High switching capacityYes

2 Form C

2 A at 30 VDC1 A 125 VAC

3 thru 48 VDC


Ultra-sensitive: 84 mW

Contact to coil: 1500 VrmsBetween open contacts:

1000 VrmsContact set to contact set:

1500 Vrms

1 x 105 at 2 A at 30 VDC

1 x 107 operations

0.80 x 0.39 x 0.45

THT

UL/CUR

AZ8222

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

18

0.61

0.55

0.48

0.60

0.83 0.63

0.80

AZ9321 High performance Low seated height Flux tight and sealed versions available

Class B (130C) insulationstandard

Yes

1 Form A, C

Medium duty:10 A at 24 VDC or 120 VAC

Heavy duty:15 A at 24 VDC10 A at 250 VAC15 A at 120 VAC

5 thru 48 VDC

203 mW


(6kV version) 3000 VrmsAcross contacts:

1000 Vrms

1 x 105 at 10 A at 120 VAC

1 x 106 operations

0.76 x 0.61 x 0.60

THT

UL/CUR

AZ9431 High performance 6 kV lightning surgewithstand

Flux tight and sealedversions available

Class F insulation systemstandard

UL, CUR file E44211

Yes

1 Form A, C

20 A at 125 VAC17 A at 277 VAC1HP at 250 VAC1HP at 125 VACTV-8 at 125 VAC

5 thru 48 VDC

203 mW



5 x 104 at 20 A at 120 VAC

1 x 107 operations

0.83 X 0.63 X 0.80

THT

UL/CUR

NEW

Subminiature size High in-rush capability 25 A switching in compact size

High operating temperature 0.3 mm contact gap ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544

Yes

1 Form C

20 A at 14 VDC(motor make)

4 A at 14 VDC(motor break)

6 thru 24 VDC

222 mW



1 x 105 at 25 A at 14 VDC

1 x 106 operations

0.61 x 0.48 x 0.55

THT

AZ9471

0.76 0.610.30

0.36

0.59

AZ8462 Microminiature size Meets FCC Part 68.302 &68.304

Meets Bellcore 2.5 kV surge test

Low profile DIP package Bifurcated contacts High sensitivity (79 mW) Bistable (latching) versionsavailable

Yes

2 Form C

2.0 A at 30 VDC0.5 A at 125 VAC

1.5 thru 48 VDC (AZ8462)

79 mW (3-24 VDC)152mW (48VDC)




1 x 105 at 0.5 A at 125 VAC2 x 105 at 1.0 A at 30 VDC

1 x 108 operations

0.59 X 0.30 X 0.36 (AZ8462)

THT/SMT

UL/CUR

19

Relay Selection GuideNEW

0.60

0.80

0.60

10 A switching in miniature size

Epoxy sealed version available

Creepage/Clearance4mm/3mm

Class F (155C) insulationstandard

Yes

1 Form A, C

Form A10 A at 250 VAC

Form C10 A/4 A at 250 VAC

5 thru 36 VDC

200 mW



5 x 104 at 10 A at 250 VAC

5 x 106 operations

0.60 x 0.60 x 0.80

THT

UL/CUR

AZ9621

1.040.91

0.880.72

0.75

0.87

Cost effective High in-rush capability Open or sealed versionsavailable

US & European footprints Coils to 24 VDC ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544

Yes

1 Form A, C

45 A at 14 VDC

6, 9,12, 24 VDC

Standard coil:484-573 mW

Sensitive Coil:675 mW



1 x 105 at 40 A at 14 VDC

5 x 106 operations

Open (AZ9701):0.91 x 0.75 x 0.72Sealed (AZ9711):1.04 x 0.87 x 0.88

THT

UL/CUR

AZ9701/AZ9711AZ9481F

NEW

High power switching(4000 VA)

High sensitivity, 128 mWpickup

DC coils up to 48 VDC Low profile (less than .5height)

UL file E43203

Yes

1 Form A, C

Form A10 A at 250 VAC10 A at 30 VDC16A at 125VAC

Form C10/6 A (N.O./N.C.) at 250 VAC10/6 A (N.O./N.C.) at 30 VDC

T Version - 5

5 thru 48 VDC

128 mW



1 x 105 at 10 A at 250 VAC

1 x 107 operations

0.89 x 0.65 x 0.45

THT

UL/CUR/TV

AZ9481

0.890.65

0.45

Super-ISO 70 Amp contact rating (SuperISO)

High momentary carry cur-rent (500 A)

ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544

Yes

1 Form A

70 A at 14 VDC

6, 12, 24

0.68 W



1 x 105 at 70 A at 14 VDC

1 x 107 operations

1.03 x1.03 x.980

Quick Connects

X

X

1.03

0.98

1.03

AZ9801

NEW

Quick connect and PCterminals

High power switching (4000VA)

High sensitivity, 128 mWpickup

UL file E43203, TVR50053055

Yes

1 Form A

10 A at 250 VAC 10 A at 30 VDC16 A at 125 VAC10 A at 30 VDC

16 A at 250 VAC8 A at 250 VAC10 A at 30 VDC

5 thru 48 VDC

128 mW



1 x 105 at 10 A at 250 VAC

1 x 107 operations

1.11 x 0.90 x 1.11

THT

Quick Connects

UL/CUR/TV

1.11

1.11

0.90

0.26

0.79

0.95

Photo isolation 600V blocking voltage Both Zero Voltage andphase controllable RandomSwitching versions

High Surge Capability

Yes

4 thru 28.8 VDC

15 mA

1.0 VDC

50 to 250 VAC

2 A

30 A

15 mA

1.5 mA

47 to 70 Hz

2000 Vrms

1000 megohms min.at 500 VDC

-30C (-22F) to 80C (176F)

0.95 x 0.26 x 0.79

THT

UL/CUR

SGC-4F Photo isolation 800V blocking voltage Both Zero Voltage andphase controllable RandomSwitching versions

High Surge Capability Built-in Snubber Triac Output Circuitry

Yes

3 VDC max.

15 mA

1.0 VDC

Type 24: 48 to 240 VACType 38: 48 to 380 VAC

40 A

400 A

0.1 mA

3 mA to 10 mA

47 to 70 Hz

4000 Vrms


-30C (-22F) to 80C (176F)

2.30 x 1.80 x 0.90

UL/CUR

SGX-1505FB

1.80

2.30

0.90

Plug-in / solder terminals High switching capacity AC and DC coils Unique Armature stop,maintains adjustment

Class F Insulation UL, CUR file E44211

No

13 A at 120 VAC13 A at 277 VAC 3 A at 600 VAC

1/3 HP at 120 VAC1/2 HP at 277 VAC

10 A at 28 VDC1HP at 277 VAC

3/4 HP at 600 VacB600 Pilot Duty

12 thru 240 VAC12 thru 110 VDC

DC : 675 mWAC:1.6 VA



Contacts set to contact set:2200 Vrms

1 x 105 at rated load

1 x 107 operations

2.90 x1.50 x 2.20

X

UL/CUR

FEATURES

EPOXY SEALED

COIL VOLTAGES



Electrical

Mechanical



Socket

APPROVAL

Form

Ratings(Resistive)

CONT

ACTS

TYPI

CAL

LIFE

TERM

INAL

S



SERIES

20

Photo isolation Up to 800V blocking voltage LED status indicator Both Zero Voltage andphase controllableSwitching versions

High Surge Capability Built-in Snubber Triac Output Circuitry

Yes

3 thru 32 VDC

35 mA at 32 VDC

1.0 VDC

36 to 440 VAC

25 A

250A

0.1 mA

3 mA to 10 mA

47 to 70 Hz

4000 Vrms


-30C (-22F) to 80C (176F)

4.14 x 2.96 x 1.19

UL/CUR

SG-24F

4.141.19

2.96

NEW

AZKUP

2.20

1.50 1.37

1-3 Form C

FEATURES

EPOXY SEALED

Turn on Voltage

Current

Turn off Voltage

Voltage Range

Maximum Current

Maximum Inrush

Min. Load Current

Leakage Current

Frequency Range

INPU

TO

UTPU

T

DIELECTRICSTRENGTH(at sea level for 1min.)

INSULATIONRESISTANCE

AMBIENTOPERATINGTEMPERATURE


Socket

APPROVAL


ELECTROMECHANICAL RELAYS

AZ880 10A Latching

AZPRD 50 A 1 & 2 PoleAZ2250 30 A with 600 mW

XMC0 Contactors (50-60 Amp) TS Series Thermistors / Temp. SensorsZCS1-70/71-120 High Current SolenoidsZCPR Potential Motor Start Relays

21


Other Products

Upcoming New Products

22

Relay Footprints

Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.

AZ5

AZ8

.70.42

.18.39

.56

.16 .52

.41

.52

.66

.26

.66.41

.16.52

.17.16

.41.66

1CT & 2CT

2C

3C 4C

AZ164

AZ164-AZ168

.458

.458

.458

.543

2 POLE

.406

4 POLE

.406

.106

6 POLE

.406

.106

.106.543

.543

AZ420

.70.42

.18.39

.56

.16 .52

.41

.52

.66

.26

.66.41

.16.52

.17.16

.41.66

1CT & 2CT

2C

3C 4C

23


.197.590 .197

.295

AZ742

.197.787

.295

AZ733W

.590 .197

.295

AZ734

AZ743

.197.590 .197

.295

AZ755

.299

.787.138

AZ756

D

VERSION[3.5].138

5 x .051[1.3]

.295[7.5]

OMIT FORFORM A .138

[16.5].650

C

[3.5]

AZ673

.138.138.649

.295

AZ697

.197.197

.590

.295

AZ733

Relay Footprints

.197.590 .197

.295

.070 .143

.465

.855

AZ760

.024[0.60]

.295[7.50]

[17.20]

AZ757

24

Relay Footprints


.400

.465

.139

AZ766

.300

.055.055

.051

.494FORM C

FORM A

AZ765

.197.590

.197

.295

AZ764AZ762

[5.0].197

[5.0].197

[15.0].591

[2.5].098

[0.8]2X .032

[1.3]

[2.5].098

[7.5]

6X .050

.295

AZ761

[7.6].299

.101[2.56]

.260[6.6]

[5.0].197

[5.0].197

[3.5].138

[1.3]

[6.6].260

[20.0].787

[1.3]5X .051

[20.0].787

[7.6].299

[3.5].138

5.0mm SPACING FORM "C"

3.5mm SPACING FORM "C"

[2.5].098

[2.5].098

[7.5].295

[7.5].295

.098[2.5]

.098[2.5]

[2.5].098

[1.3]

[5.0].197

5 x .051

.787[20.0]

.197[5.0]

[1.3]5 x .051

5 x .051[1.3]

.098[2.5]

[5.0].197

[5.0].197

[3.5].138

[20.0].787

[20.0].787

[7.5].295

[3.5].138

1 FORM C5.0mm RIGHT SPACING

AZ763R

1 FORM C5.0mm LEFT SPACING

AZ763L

AZ763

1 FORM C3.5mm SPACING

*

*

*

* Not used on 1 Form A relay

AZ763

AZ762F

4-.059[1.50]

.197[5.00]

1.280[32.50]

.295[7.50]

2-.051[1.30]

.098[2.50].098[2.50]

25

Relay Footprints


.441

.059

.300

.100

AZ767

.30[7.6]

.50[12.7]

.1[2.54]

.06[1.5]

.30[7.6]

.60[15.24]

.157[4]

.25[6.35]

Type 2

Type 1

AZ770

.748

.240

1.087

.866

.150

.472

AZ769

AZ830-4POLE

AZ832

AZ832P

.26

10x.04

10x.12

8x.10

AZ851

AZ850

AZ852THT

SMT

SMTss

0.2[5.08

0.13[3.2] 0.09[2.2] 0.09[2.2]

0.13[3.2] 0.09[2.2] 0.09[2.2]

0.26[6.64]

0.03[0.8]

0.24[6.14]

0.09[2.2]0.09[2.2]

.100[2.56]

.08[2.08]

0.13[3.2]

0.03[0.8][0 8

26

AZ940

.472.236

.078.480

AZ942H

.480.078

.236.472

AZ942/AZ942A

AZ939

.185[4.7]

4- .043[1.1]

.276[7.0]

.453[11.5]


Relay Footprints

.098 [2.5]

.086 [2.2]

.246 [6.25]

.541 [13.75]

.148 [3.75]

.11 [2.8]

.246 [6.25]

.098 [2.5]

.541 [13.75]

.148 [3.75]

.148 [3.75]

.148 [3.75] .11

[2.8]

.087 [2.2]

AZ934

.665

3 x .148

.148

.738

.226

.148

AZ935

AZ920

0.1[2.54]

0.3[7.62]

0.3[7.62]

0.1[2.54]

0.4[10.16]

0.2[5.08]

Standard

AZ853

.125[3.2]

.125[3.2]

.3[7.6].09[2.2][

8-.124[3.1]

8-.031[0.8]

.21[5.3]

.3[7.6].125[3.2] [2.2]

8-.03[0.8]

8-.09[2.25]

.125[3.2] .09[2.2]

.175[4.45]

THT

SMTss

SMT

.3[7.6]

.400[10.16]

.300[7.62]

.300[7.62]

4-.047[1.20]

.400[10.16]

.300[7.62]

.300[7.62]

6-.047[1.20]

Single side stable & 1 coil latching

-1A -1 AB

2 coil latching-1 A -2A, -1 AB

.100[25.4]

.300[7.62]

.300[7.62]

.300[7.62]

6-[.047][1.20]

.100[25.4]

.300[7.62]

.300[7.62]

.300[7.62]

8-[.047][1.20]

Viewed Toward Terminals

AZ881

K Version

27


Relay FootprintsAZ957

AZ954

.20.40

.15

.15

.20

.10

AZ946

AZ943/AZ943H

AZ943SAZ973

.315

.39

.665

5x.248

AZ961

AZ975/AZ976

0.047[1.20]

0.056[1.42]

1 4 2

5

3 6

7

1 4 2

5

3

7

6

0.200[5.08]

0.350[8.89]

0.150[3.81]

0.200[5.08]

0.033[0.85]

0.073[1.85]

0.150[3.81]

0.350[8.89]

0.200[5.08]

0.200[5.08]

7-0.051[1.30]

7-0.051[1.30]

0.071[1.80]

0.094[2.40]

.559[14.20]

5X.051[1.30]

.236[6.00]

.472[12.00]

.480[12.20]

.134[3.40] .059[1.49]

VIEWED TOWARD TERMINALS

.059[1.50]

.236[6.00]

.472[12.00]

5X.197[5.00]

.606[15.40] 5X.079

[2.00]

.100[2.54]

.200[5.08]

.300[7.62]

6x.039[1.0]

87 85

86

1A

30

87A

30

86

1C

87 85

.665

[16.9]

.330

[8.4] .705

[17.9]

.665

[16.9]

.705

[17.9]

.330

[8.4]

.315

[8]

.080

[2].080

[2]

.333

[8.45].333

[8.45]

AZ974

28

AZ987

5X.110.008[2.80.2]

5X.031[0.8 ] +0.2

-0.1

+.008-.004

.319.008[8.10.2]

.638.008[16.20.2]

.307[7.8]

AZ986

0.502-.020

.118[3.00]

4-.067[1.7]

.315[8.00]

.764[19.4] 0,079

[2,00].276[7.00]

.315[8.00]

4-.087[1.10]

.402[10.20]

.142[3.60]

.118[3.00]

.020[0.50]

.283[7.20]

.024[0.60]

.053[1.35]

.276[7.00].315[8.00]

.020[0.50]

.118[3.00]

FORM A,CSINGLE

FORM A,C TWIN

2-.067[1.7] .071[1.80]

2-.071[1.80] 4-.087

[1.10]

4-.067[1.7]

Relay Footprints


AZ984

AZ983

AZ980

30

87A85.705[17.9]

86

87

.661[16.8]

[8.3].327

[7.9].311

FORM C VERSION SHOWNVIEWED TOWARD TERMINALS

[3.5].137

[10.6].418

[3.8]2 x .150

[7.6]2 x .300

[ 1.93 .076]2 x .076 .003

[8.5].335

[17.0].669

[9.9].390

[ 2.18 .076]9 x .086 .003

[8.4].331

[8.0].315

AZ979

Form A

Form C

1.173MAX[29.8]

.311[7.9]

1.173MAX[29.8]

.327[8.3]

.705[17.9]

.661[16.8]

1.173MAX[29.8]

1.173MAX[29.8]

.327[8.3]

.705[17.9]

.661[16.8]

30

85 8887

87

30

85 88

87

AZ977

[4.5].177

[9.0].354

[14.1].554 [2.6]

.099

[8.0].315

87

30

85

86

87a

42

5 3

*

3X.083[2.10]

.276[7.00]

.315[8.00]

2X.098[2.50]

5X.031[0.80]

.354[9.00] .177

[4.50]

29

Relay Footprints


AZ2100

.157[4.0]

.189[4.8]

.031[0.8]

2-.020x.012[0.5x0.3]

3-.047x.012[1.2x0.3]

.331[8.4]

.189[4.8]

.134[3.4]

.189[4.8]

.031[0.8]

4-.012x.020[0.3x1.2]

6-.047x.012[1.2x0.3]

BOTTOM VIEW

.331[8.4]

.157[4.0]

AZ2110

.081 .003(2.06 .076)

.900(22.84)

.300(7.6)

.400(10.2).150(3.81).550(13.96)

.700(17.77)

.043 .003(1.09 .076)

DIA (3 PLACES)

DIA

Viewed toward terminals

.30

.70.40.20

.50.10

.10

.15

Form C

AZ988

AZ2150

AZ2200

.70

.30

.10

.15

.40.20

.50

.10

Form C

C1/C2

C3

AZ989

Form C

30

Relay Footprints

.8508[21.59]

.100[2.54]

.110[2.80]

.751[19.08]

.751[19.08]

1.00 [25.4]

.110

[25.4]1.00

.200

[5.08]

1.00[25.4]

.100

[21.59].850

.110[2.80]

.751 [19.08]

AZ2500P1-1

AZ2500P1-2 "K"

AZ2500P2

AZ2500

AZ2510

.197[5.00]

3X.039[1.00]

.197[5.00]

3X.028[0.70]

0.329 [8.36]

0.571 [14.50]

.44.56

.44

.56

.70

.70

1.44

1.44

2.36

2.36

AZ2700

AZ2501

.167

[4.3]

.472

[12.0]

1.083

[27.5]

.266

[6.8]

.376

[9.6]

.295

[7.5

].1

32[3

.35]

4

32

5

6

.394

[10.

0]

1

.109[2.77]

3x.073

[1.86]

3x.041

[1.04]

Suffix K only

AZ2310

[43.5]1.713

[4.5]2 x .177

2x.14

1.71

AZ2280

.701[17.8]

.551[14.0]

.150[3.8]

.606[15.4]

.906[23.0]

.098[2.5]

2X.032[0.81]

2X.062[1.57]

2X.025SQ[0.64SQ]

.045SQ[1.14SQ]

AZ2270

31

Relay Footprints

.56

.44.56

.44

1.57

.75

.75

1.57

AZ2702

.18

2.35

AZ2800

.75

1.57

.75

1.57

.44.57

.44

.57

AZ2703

1.44

1.44

.70

.57.44 .44

.57

.70

AZ2701

1.44

1.44

.70

.57

.44.57

.44

.70

AZ2704

2.362[60]

AZ2705

.08

1.00

.271.21

.31

.43

.20

.20

.20AZ2850 AZ2850

32


Relay Footprints

.23

6[6.

0].23

6[6.

0] .079[2.0]

.480[12.2]

5-.051 [1.3].23

6[6.

0].23

6[6.

0] .079[2.0]

.480[12.2]

4-.051 [1.3]

1A 1C

AZ9321

AZ8222

0.300[7.62]

0.047[1.2]

0.300[7.62]

0.500[12.7]

0.700[17.78]

8X0.035 [ 0.9]

AZ8461

.100[2.54]

.100[2.54]

.59[15.0]

.30[7.5]

.043[1.1] .200[5.08]

.200[5.08]

.046[1.16]

8-.031[0.8]

AZ6962

[3.2].126

.050 [1.3]

[ 1.3]

.298 [7.56]

.744 [18.9]

.116 [2.95]

.198 [5.04]

4 x .051

.126[3.2]

.870 [22.1][ 1.3]

5 x .051

[1.3].050

[1.57].062

[7.56].298

1 FORM A

1 FORM C

VIEWED TOWARD TERMINALS

[3.2].126 .126

[3.2]

[ 1.3]8 x .051

[1.3].050

[1.57].062

[7.56].298

2 FORM C

.744 [18.9]

AZ6961

.870[22.1]

FORM C

FORM A

.744[18.9]

.298[7.56]

4x.051[1.3]

.298[7.56]

5x.051[1.3]

.126[3.2]

.062[1.57]

.126[3.2]

.050[1.3]

.116[2.95]

.198[5.04]

.050[1.3]

0.2

[5.08

]

0.1

[2.54]

0.044

[1.13]

0.3

[7.62]

0.2

[5.08]

AZ6951

.200[5.08]

.200[5.08] .100[2.54]

.100[2.54].200[5.08]

.200[5.08]

SINGLE SIDE STABLE & 1 COIL LATCHING

2 COIL LATCHING

8-0.039[1.00]

10-0.039[1.00]

2 COIL LATCHING

.100[2.54]

SINGLE SIDE STABLE & 1 COIL LATCHING

.100[2.54].200[5.08]

.200[5.08]

.283[7.19]

.283[7.19]

.122[3.11]

.039[1.00]

.039[1.00]

0.122[3.11]

PC Board Layout (SMT type)PC Board Layout (DIP type)

AZ8462

33


Relay Footprints

3.614

1.874

SG-24F

[4.35].171

.056 [1.42]

[1.0]4 x .039

4 x .039 [1.0]

.171 [4.35]

[1.42].056

TERMINAL STYLE "T"

TERMINAL STYLE "M"

SGC-4F

1.870[47.5]

SGX-1505FB

AZ9431

12.00

[14.20]

.480

.559

[12.20]

.236[6.0]

.134[3.40]

.059[1.49]

.472

.40.20

.40

.10

AZ9471

.701[17.8]

0.5[12.7]

0.4[10.2]

0.3[7.62]

.701[17.8]

0.4[10.2]

2-.036[0.9]

2-.036[0.9]

3-.052[1.3]

2-.052[1.3]

0.5[12.7]

FORM A FORM C

AZ9481

3 Yoke Term.

.586[14.88].176[4.47]

.147[3.73]

.268[6.81]

.467[11.87]

.161[4.08].483[12.28]

.148 [3.75]

.211[5.35]

.092[2.33]

.092[2.33]

.211[5.35]

.586[14.88].134[3.4]

.147[3.73].213[5.4]

.467[11.87] .148 [3.75]

.483[12.28]

.161[4.08]

AZ9711

AZ9701/AZ9711

AZ9801

30

85.705[17.9] 86

87

.661[16.8]

[8.3].327

AZKUP

.098[2.5]

.197[5.0]

.197[5.0].

.049[1.25]

.246[6.25]

.197[5.0]

0.295[7.5]

AZ9621

2-.036 [0.9]

.701[17.8]

.561[14.3]

.039[1.0] .071[1.8]

.197[5.0]

.634[16.1]

AZ9481F

34

NAIS (Aromat) ZettlerALD AZ939

CB 40 amp AZ973/AZ974CM AZ988

CT5 AZ934/AZ935DS2 AZ830/AZ832

DS2 Latching AZ830P/AZ832PDS2Y AZ830/AZ832

DS4 AZ830 4-PoleHD AZ955/AZ957HL AZ164/AZ165/

AZ166K 2-Pole AZ420/AZ428K 4-Pole AZ421/AZ429K 6-Pole AZ431/AZ439

KE AZ2428/AZ2429JE-X AZ991JJM AZ9471JM AZ760JR AZ725/AZ755JS AZ942/AZ943

JSM AZ942AJT AZ2100/AZ2200

JTN AZ2110/AZ2210JTN AZ2150/AZ2250

JTN1 AZ2270JV AZ9481

JW1 AZ692/AZ697/AZ761

JW2 AZ732/AZ733/AZ743

LA AZ734LD AZ939LK AZ672/AZ673PA AZ920TQ AZ847/AZ850TW AZ833/AZ8461TX AZ833/AZ8461

Bosch Zettler0 332 AZ988

C P Clare ZettlerLM AZ8222LM AZ830/AZ832LX AZ830P/AZ832PLQ AZ847/AZ850

Crydom ZettlerD53 SG-24F

Fujitsu-Takamisawa Zettler

A AZ847/AZ850BA AZ833/AZ8461

FBR10 AZ833/AZ8461FBR160 AZ942/AZ943

JS AZ6962 FBR210 AZ5X/AZ5Y/

AZ951/AZ952/AZ954X/AZ954Y

FBR240 AZ8222FBR51 AZ9471

Fujitsu-Takamisawa Zettler (cont.)

FBR610 K AZ725/AZ755/AZ762

FBR610 AZ692/AZ697/AZ761

FBR620 AZ732/AZ733/AZ743

FRL AZ9711FTR-F1 AZ743FTR-H1 AZ761FTR-P2 AZ934/AZ935

JS AZ696/AZ6961/AZ6962

LZ AZ8MZ AZ951/AZ954XNA AZ8461/AZ833NY AZ920RA AZ8222/AZ832

RA4 AZ830 4-PoleRY AZ8222/AZ832SY AZ955/AZ957VB AZ732/AZ733/

AZ743VH AZ760VS AZ692/AZ761/

AZ697VSB AZ755/AZ762

Guardian Zettler1390 AC/DC AZ165

1390P AC/DC AZ1641390F AC/DC AZ166

1495 AZ82221505 AZ5Y/AZ952/

AZ954Y1540 AC AZ1651545 DC AZ164

1555 AZ4201575 AZ942/AZ943

1655/1655S AZ692/AZ697/AZ761

1655/1655S AZ732/AZ733/AZ743

167 AZ81690 AC/DC AZ165

1690F AC/DC AZ166

Hasco Zettler2KLT AZ945

BAS-111 AZ952/AZ954YBAS-511 AZ952

CAR AZ973CAS212 AZ8222

HAS-115 AZ8222HAS-211 AZ952HAS-212 AZ8222/AZ830HAT-901 AZ2150/AZ2151HAT-904 AZ2800/AZ2850

HBS AZ957HPR AZ940KLT AZ943

KSD AZ946MHR AZ9481SLT AZ9471

Hasco Zettler (cont.)

SSD AZ8SSR SGC-4F

T AZ850/AZ850P

Idec ZettlerRW AZ830/AZ832RG AZ692/AZ2692/

AZ697/AZ761RCN AZ942/AZ943

RT AZ420

Magnecraft(MSD) ZettlerClass 67 AZ420/AZ421/

AZ431Class 76 AZ692/AZ697Class 76 AZ732/AZ733Class 76 AZ725/AZ755Class 78 AZ164/AZ165Class 90 AZ2110/AZ2120/

AZ2150Class 91 AZ2100/AZ2280

Class 178 AZ942/AZ943Class 272 AZ8222Class 232 AZ5Y/AZ952/

AZ954YClass 232 AZ5X/AZ951/

AZ954XClass 270 AZ942/AZ943Class 277 AZ692/AZ697Class 277 AZ732/AZ733Class 277 AZ725/AZ755Class 281 AZ164/AZ165Class 283 AZKUP

Mid-Tex (CII) Zettler157 AZKUP

MQP AZ847/AZ850MN AZ833/AZ8461MD AZ8222190 AZ8222327 AZ830/AZ832327 AZ830P AZ832P191 AZ955/AZ957MS AZ5Y/AZ952/

AZ954Y410 AZ420500 AZ766501 AZ765496 AZ942/AZ943596 AZ943597 AZ932498 AZ725/AZ755/

AZ762491 AZ2100/AZ2120/

AZ2280590 AZ2110/AZ2150V4 AZ973

AZ942AVM AZ975/AZ976156 AZ164/AZ165/

AZ166

Mid-Tex (CII) Zettler (cont.)

158 AZ164/AZ165/AZ166

258 AZ164/AZ165/AZ166

NEC ZettlerEA2 Z847/AZ7850EB2 Z848/AZ851EC2 AZ833/AZ8461EE2 AZ833/AZ849

MR301 AZ942/AZ942A/ AZ943/AZ9431

MR31 AZ942/AZ943/AZ9431

MR602 AZ8222MR602 AZ830/

AZ832MR602 AZ830P/AZ832PMR604 AZ830 4 POLEMR612 AZ830/AZ831/

AZ832MR612 AZ830P/AZ832P MR614 AZ830 4 POLEMR62 AZ8222MR62 AZ830AZ832

MR622 AZ830/AZ832MR71 AZ692/AZ2692/

AZ697/AZ761MR72 AZ732/AZ2732/

AZ733/AZ743

Omron ZettlerG2E AZ5Y/AZ952/

AZ954YG2L AZ693/AZ2693G2R AZ692/AZ2692/

AZ697/AZ723/AZ732/AZ2732/AZ733/AZ743/AZ761/AZ763/AZ764

G2V AZ8222G4K AZ8G4S AZ942/AZ943/

AZ9431G5C AZ9481G5L AZ942/AZ943/

AZ9431G5N AZ939

G5PA-2 AZ734G5V-1 AZ955/AZ957G5V-2 AZ8222

G6A AZ830/AZ832G6A AZ830P/

AZ832PG6A AZ830 4 POLEG6D AZ6951G6R AZ696/AZ6961G7G AZ2100G7L AZ2700G8H AZ988G8J AZ974

Suggested EquivalentsAmerican Zettler, Inc. offers this list of suggested equivalents by its own and other relay manufacturers part numbers as a guideline for possible inter-changeability. Because critical parameters such as coil resistance, must operate voltage, terminal footprint, etc. may differ slightly, a detailed compari-son between data sheets should be done before selecting a particular relay as an exact cross reference. Due to rapid addition, deletion, and revisionof its own and competitive relays, American Zettler, Inc. cannot guarantee the total accuracy of this list. Questionable interchangeability of productsshould be referred to American Zettler, Inc. for clarification.

35

Suggested EquivalentsOmron Zettler

(cont.)G8N AZ989G8P AZ2110/

AZ2111/AZ2150/AZ2151

G8W AZ986LC AZ942/AZ943/

AZ9431LY AZ164/AZ165/

AZ166MHS AZ420/AZ421/

AZ428/AZ429MHQ AZ2428/

AZ2429

OEG ZettlerOUA/OUAT AZ951/AZ954X

OUAZ AZ951/AZ954XORZ AZ820/AZ8222ORZ AZ830/AZ832

OUDT/OUDTM AZ8/AZ8AOUDE AZ8/AZ8A

SRU/SRUT AZ942/AZ943/AZ9431

ORW AZ942/AZ943/AZ9431

ORA AZ991OMI/OMIH AZ692/AZ2692/

AZ697/AZ761OMI/OMIH AZ732/AZ2732/

AZ733/AZ743OSA AZ673/AZ734

SRET AZ164/AZ165/AZ166

SRW AZ943OZ AZ762

OZF AZ756OMIT AZ692/AZ2692/

AZ697/AZ761OJ/OJE AZ767/AZ770

PCD AZ948

Schrack ZettlerRP AZ692/AZ2692/

AZ697/AZ723/AZ732/AZ2732/AZ733/AZ743/AZ761/AZ763/AZ764

RS AZ8222RS AZ830/AZ832RS AZ830P/

AZ832PRT AZ743/AZ761/

AZ762RY AZ696/AZ6961/

AZ6962TD AZ2110/

AZ2111/AZ2150/AZ2151

TE AZ2100/AZ2280

TF AZ942/AZ943/AZ9431

TN AZ942/AZ943/AZ9431

TP AZ8/AZ8AZD AZ2110/

Schrack Zettler (cont.)AZ2111/AZ2150/AZ2151

ZF AZ942/AZ943/AZ9431

ZK AZ420/AZ421/AZ428/AZ429/AZ431/AZ439

ZL AZ420/AZ421/AZ428/AZ429/AZ431/AZ439

Song Chuan Zettler792 AZ973

792H AZ973793 AZ697/AZ733/

AZ755801H/A AZ943

812H AZ943812HM AZ943

821 AZ760822E AZ97011/

AZ9711832 AZ2110/

AZ2150833H AZ943

834 AZ766835 AZ767841 AZ2702842 AZ954Y

842A AZ954X845 AZ743/AZ761/

AZ762SCLB/SCLD AZ164/AZ165

SCLA AZ164/AZ165SCL/SCL-1 AZ164/AZ165

Taiko ZettlerTB1 AZ989

Teleme- canique Zettler

DR AZ8222DRS AZ830/AZ832T154 AZ420/AZ421/

AZ428/AZ429/AZ431/AZ439

T163 AZ420/AZ421/AZ428/AZ429/AZ431/AZ439

Texcell ZettlerCN AZ734

Tyco (P&B) ZettlerK10 AZ164/AZ165/

AZ166KUP AZKUP

PB AZ9621RKA/RKS AZ692/AZ2692/

AZ697/AZ725/AZ755/AZ761/AZ762

T75 6962PCD AZ9481

RKA/RKSAZ732/AZ2732/AZ733/AZ743

R10 AZ420/AZ421/

Tyco (P& B) Zettler (cont.)AZ428/AZ429/AZ431/AZ439

R10R AZ2428/AZ2429

RT AZ743/AZ761/AZ762

SSRT SGX-1505FBTB1 AZ989T70 AZ942/AZ943/

AZ9431T7C AZ942/AZ943/

AZ9431T7N AZ942/AZ943/

AZ9431T72 AZ942/AZ943/

AZ9431T72J/T72K/T72M AZ942A

T73 AZ8/AZ8AT75 AZ696T77 AZ767

T77V/T773 AZ770T81 AZ5X/AZ951/

AZ954XT82 AZ8222T83 AZ830/AZ832T84 AZ830 4-PoleT85 AZ8222T90 AZ2110/

AZ2111/AZ2150/AZ2151

T91 AZ2100/AZ2101/AZ2200

T9A AZ2100/AZ2150/AZ2270/AZ2280

T92 AZ2800/AZ2850

V23026 AZ956/AZ956PV23042 AZ832V23086 AZ989V23086 AZ987V23079 AZ833/AZ8461V23105 AZ8222V23106 AZ847/AZ850

VF4 AZ973/AZ974VF7 AZ983

VF28 AZ986VFM AZ988VKM AZ975/AZ976VKP AZ9701/

AZ9711VM AZ984

Point your browser to http://www.azettler.com

XIAMEN ZETTLER ELECTRONICS CO., Ltd.6/F Yingfeng BuildingNo. 48-50 Huli AvenueXiamen 361006, ChinaTel: 86-592-5654-798FAX: 86-592-5654-955E-Mail: [email protected]

ZETTLER ELECTRONICS (HK)LIMITEDRoom 211, Hewlett Centre52-54 Hoi Yuen RoadKwun Tong, Hong KongTel: 86-852-2375-1288FAX: 86-852-2375-7433E-Mail: [email protected]

ZETTLER ELECTRONICS GmbhGERMANYJunkersstrasse 3D-82178 PuchheimGermanyTel: 49-89-80097170FAX: 49-89-80097200E-mail: [email protected]

AMERICAN ZETTLER, INC.75 ColumbiaAliso Viejo, California 92656U.S.A.Tel: 949-831-5000FAX: 949-831-8642E-Mail: [email protected]

It is here that you will find:

Complete data sheets for all the relays you see in this selector guide. These data sheets are in Adobe Acrobat PDF format. Thismeans you can download and print at 600 dpi for crystal clear copy.

Autocad drawing files (in both Autocad and DXF format) of each relays footprint and terminal layout so you can simply drop thedrawing into your PCB layout drawing.

Downloadable UL Component Recognition Cards (yellow cards) for relays approved by UL.

Full up-to-date listing of all our Sales Representatives and Distributors and the ability to check distributor stock.

Forms for requesting catalogs, data sheets and application information as well as a sign-up form for American Zettlers e-mailnewsletter.

INTERNATIONAL OFFICES

Printed 6/06 - 2M

ZETTLER ELECTRONICS SHANGHAIRoom 2107, Xinda BuildingNo.322 Xianxia RoadShanghai, ChinaTel: 86-21-6278-5776FAX: 86-21-6278-5773E-mail: [email protected]

Documents

RELAY Selector Guide