Upload
ngongoc
View
218
Download
0
Embed Size (px)
Citation preview
REFERENCES
1. D. D. Majumdar, D. Das “Digital Computer Memory”
Second Edition, John Wiely and Sons,
Newyork, 1983
2. Thomas C. Bartee “Digital Computer Fundamentals”
McGraw Hill International Edition^
Computer Science Series
3. Dharma Rajaraman,
V. Rajaraman
“Computer Primer” Revised Edition,
Prentice Hall of India Pvt. Ltd.
New Delhi, 1988
4. Technical Education and
Management
“Computer Basic” Analog Computers
Mathematics and Circuitry
W. Foulsham and Co. Ltd.,
England, 1962
5. Art Lew “ C o m p u t e r Science, A mathematical
Introduction”, Prentice Hall
New Delhi, 1985
6. R. Venkataraman “Pulse Digital Circuits *nd Computer
Fundamentals”,Dhanpat Rai and Sons,
Delhi, 1989
Third Edition, International Student Edition,
1981
8. George Diehr, Terry Baron, “BASIC Programming for the
Thomas IBM Personal Computer”
Wiley International Edition
Newyork, 1987
9. Gordan B. Davis,
Thomas R. Hoffmann
“FORTRAN 77, A Structured
Disciplined Style” Third Edition
McGraw Hid International Edition
1988
10. Ram Kumar “Programming with FORTRAN 77”
Tata McGraw Hill, New Delhi, 1986
l l .M .M . Hasan “Principles of COBOL Programming”
Dhanpat Rai and Sons, Delhi, 1984
12. M. Kumar,
T.K. Bandopadhyaya
“Digest on FORTRAN IV Programming”
Khanna Publishers, Delhi, 1986
13. Peter Bishop “Computer Programming in BASIC”
Khanna Publishers, Delhi, 1988
14. B. J. Holmes “A Complete text o n ,
BASIC Programming”
ELBS, D P Publications, 1987 Reprint
16. Albert Paul Maivino
17. Donald H. Handers
18. Peter Norton
19. Alan Simpson
20. Lau Barues
21. A. K. Jain
“Computer Programming in BASIC”
Programming for Micro and
Mini Computers,Tata McGraw Hill
New Delhi, 1983
“Digital Computer Electronics
An Introduction to Micro Computers”
Tata McGraw Hill, New Delhi, 1983
“Computers Today”
McGrat Hill International Edition, 1988
“Introduction to Computers Glencoe”
Macmillan/McGraw HiU,Newyork, 1995
“Advanced Techniques in DBaseHl
Plus”, BPB Publication, First Edition,
New Delhi, 1986
“Introducing DBase III Plus”
Khanna Publishers, First Edition,
Repring, 1988
“Computer for Biginners”
Khanna Publishers, First Edition,
Delhi, 1987
23. N. Kannan
24. Robert G.
25. Johan M. Mccormick,
Mario G. Salvadori
26. Morton H. Lewin
27. Charles C. Edwards
28, Aditya P. Mathur
“Microsoft Basic using modular
structure” , Second Edition,
S. Chand & Company Pvt. Ltd., 1989
“Creative Computing Using BASIC”
Wiley Eastern Limited, 1990
“BASIC A M odular Approach
A First Course” , Second Approach,
CBS Publisher & Distributers, Delhi,
1986
“Numerical Methods in FORTRAN”
Edition Fourth, Prentice Hall of India
Pvt. Ltd., Delhi
“Clements of C”
Khanna Publishers 2-B Nath Market Nai
Sarak, Delhi, First Edition Dec. 1987
“Advanced Techniques in Turbo Pascal”
BPB Publication, First Indian Edition,
1988
“Introduction to PASCAL”
Tata McGraw Hill Publishing
First Reprint Apr. 1989
“Working with LOTUS 1-2-3
A Comprehensive Manual”
Jaico Publishing House Bombay,
First India Edition, 1988
30. Schaum’s Outline Series “Theory & Problem of Programming
Byrous with PASCAL”, McGraw Hill
International Edition 4th Printing, 1988
31. Brian W. Kemighan “Programming Language”
Prentice Hall o f India Private Ltd.
Second Edition, 1989
32. Seymour C. Hirsch “BASIC Programming Self Taught”
Prentice Hall of India Private Ltd.,
Sixth Printing July 1988
33. Curt Townsend “Mastering DBase III Plus :
A Structured Approach”
PBB Publication Market Delhi,
First Indian Edition, 1987
34. N. Subramanian “Programming for BASIC”
3 rd Edition, A. H. Wheeler and Co. Delhi,
1987
35. E. Balaguruswamy “Programming BASIC”
Tata McGraw Hill, 1989
37. Richard Allen King
38. S. N. Motewar,
S. Domkundwar
39. K. D. Sharma
40. S. N. Motewar,
S. Domkundwar
41. N. Subramanian
42. Alain Liegeois
“Computer Programming and
Information System with FORTRAN
BASIC and COBOL Languages”
Dhanpal Rai and Sons, Delhi, 1986
“The MS DOS Handbook”
Second Edition, BPB Publication,
Delhi, 1986
“Computer Programming in
FORTRAN IV with Introduction to
BASIC”, Dhanpat Rai and Sons,
Delhi, 1991
“Programming in FORTRAN IV”
East West Press, New Delhi, 1976
“Data Processing and Computer
Programming” J)hanpat Rai and Sons,
New Delhi, 1992
“FORTRAN Self Taught”
A. H. Wheeler and Company, Delhi, 1988
Robot Technology Vol7.,
Performance and Computer Aided Design,
Kogan Page, London 1984
43. M. K. Roy,
D. Ghosh Dastidar“COBOL Programming including MS
COBOL Programming and COBOL 85”
Second Edition , Tata McGraw Hill, 1989
44. M. H. Hasan “Computers Programming for Engineers
Theory and Practice”, Dhanpat Rai and Sons,
Delhi, 1987
45. Arup Kumar Mukherjee, “Computer Methods of Structures”
Pijush Kant Som Khanna Publishers, Delhi, 1985
46.S. Ramani, N, V.
Kotewara Rao,
R. Nagarajan
“A Text Book on Computer
Programming with Industrial and
Engineering Applications”
CBS Publishers, Delhi, 1987
47. Richard M. Jones “Introduction to PASCAL”
CBS Publishers, Delhi, 1984
48. S. N. Motewar, “A Course in Computer Program with
S DomKundwar Numerical Techniques, FORTRAN IV
with Introduction to FORTRAN-77”
Dhanpat Rai and Sons, Delhi, 1986
49. V. Rajaraman “Computer Programming in
FORTRAN-77”, Third Edition,
Prentice Hall oflndia, Delhi, 1991
50. V. Rajaram an,
T. Radhakrishanan
51. V .K . Jain
52. S. K. Gupta
53. V. Rajaraman
54. L. Bhirud
55. B. I. Holmas
56. R. Raja Gopalan
57. Ashok K. Jain
58. V. Rajaraman
“An Introduction to Digital Computer
Design", Prentice Hall Inc , 1992.
“BASIC Programming with
Applications”, Tata McGraw Hill,
Tenth Print, 1990
“Linear Programming and Network
Models”, EWP Affiliated East West
Press Pvt. Ltd., New Delhi, 1989
“Computer Programming in
FORTRAN-IV”, Second Edition(P.H.I.)
Print Limited, 1984
“Computer Programming for Science
& Engineering”, Oxford & IBH
Publishing Co., New Delhi, 1986
“BASIC Programming”
3rd Edition (GB), 1986
“Understanding Computer”
Tata McGraw Hill Publishing, 1992
“FORTRAN Programming”
Second Edition (Nemchand), 1992
“Analog Computational Simulation”
Prentice Hall o f India, 1984
59. V. Rajaraman
60. G.P.Chhalotra,
C.V. Rama Rao, A
61. G.P.Chhalotra,
C.V. Rama Rao, A. C.
62. G. V. Rao
63. A. P. Mathur
64. G.P. Chhalotra,
M. BalaKrishna,
A. C. Rao
Principles of Computer Programming”
Second Programming (P.H.I.),
Prentice Hall Inc., 1987
“Simulation of Secured and adequate
C. Rao Performance of Microprocessor and
Minicomputers” , AMSE Review,
AMSE Press, Vol 13, No. 3,1990 ,
pp 19-48.
“Simulation of Security Problems for
Rao Microprocessor and Minicomputers” ,
AMSE Review, AMSE Press,
Vol 13, No. 4,1990 , pp 7-24.
“Microprocessors and Microcomputers
Systems”, CBS Publishers and
distributors, Delhi, 1984 (Book)
“Introduction to Microprocessors”
Tata McGraw Hill Company Limited
New Delhi, 1984 (Book)
“Simulation of Security and Adequacy
Attributes if High Phase Power System
under various single and sequential faults
using modal Network”,The Journal of
the Institute o f Engineers (India),
Vol. 71, August, 1990, pp 116-120
65. P. N. Rao, N. K. Tiwari
and T. K. Kundra
66. M. P. Groover,
E. W. Zimmers,Jr
67. W. A. Smith (ed)
68. D. J. Bowman
69. E. Teicholz
70. T. T. Kukiinski
71. E. J. Preston,
G. W. Crawford,
M. E. Coticchia
“Computer Aided Manufacturing”
Tata McGraw Hill Publishing Company,
New D elhi, 1993
“CAD / CAM : Computer Aided Design
and Computer Aided Manufacturing”
Prentice Hall, New Jersy, 1984
“A Guide to CAD/CAM”
Revised Edition, The Institution of
Production Engineers, London, 1985
“The CAD/CAM Primer”
Howard W Sams, Indiana, 1984
“CAD/CAM Handbook”
McGraw HiU Book Company, Newyork,
1985
“A Control Digitizer Tablets”
Computer Graphic World, Vol. 8, No. 5,
May 1985, pp 45-52
“CAD/CAM Systems Justification,
Implementation,Productivity
Measurement”, Marcel Dekker, Newyork,
1984
72. Androw J. De B ae t,
Kathleen M. Wheeler“Midrange PA-RJSC Workstations
with Price Performance Leadership”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 6-11
73. Craig A. Gleason,
Leith Johnson,Steven
T. Mangelsdorf, Thomas
O. Meyoer and
Mark A. Forsyth
“VLSI Circuits for Law and Midrange
PA-RISC Computers”,
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 12-22
74. Frank J. Lettany “ECL Clocks for High Performance
RISC Workstations” ,Hewlett Packard
Journal, Vol. 43, No. 4, August 1992,
pp 23-25
75. Daniel Li, Audrey B.Gore “HP 9000 Series 700 Input/Output
Subsystems”,Hewlett Packard Journal,
Vol. 43, No. 4,August 1992, pp 26-33
76. Ali M. Ahi, Gregory
D. Burroughs,
Adurey Gore,Steve W.
Lamar, Chi-Yen,R. Lin
and Alan L. Wiemann
“Design Verification of the HP 9000
Series 700 Pa RISC Workstation”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 34-42
77. Arlen L. roesner
John P. Hoppal“Mechanical Design of the HP 9000
Model 720 and 730 Workstations”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992,, pp 43-48
78. Spencer M. Ure,
Kelvin W. Allen,
Anna M. Hargis, Samuel
Hammel and Paul Roeber
“Meeting Manufacturing Challanges for
PA RISC Worstations”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 49-54
79. Craig R. Frink, Robert J. “High Performance Designs for the Low
Hammond, John A. Dykstal Cost PA-RISC Deskpot”
and Don C. Soltis Jr Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 55-63
80. Daniel A. K earl,
Michael S. Ard
81. Craig Maze,
Daniel Loren E. Johnson,
A. Kearl and
James P. Shields
“Low Cost Plain Paper Colour Inkjet
Printing” Hewlett Packard journal,
Vol. 43, No. 4, pp 64-68
“Ink and Print Cartridge Development
for the HP Desk Jet 500 / Desk Writer C
PrinterFamily”, Hewlett Packard
Journal, Vol. 43, No. 4, August 1992,
pp 77-83
82. Lee S. Mason, Mar C. Huth “Automated assembly of the HP Desk Jet
500 C/Desk Writer C Colour Print
Cartridge”, Hewlett Packard Journal,
Vol. 43, No. 4, August 1992, pp 77-83
83. Douglas J. Reed , “Adhesive Materials and Equipments
Terry M. Lambright Selection for the Inkjet 500C/Desk writer
C Colour Print Cartridge”,
Hewlett Packard Journal, Vol. 43, No.4,
August 1992, pp 84-86
84. Michael J. Monroe “Machine Vision in Colour Print
Cartridge Production”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 87-92
85. William J. Allen,
Toni D. Courville,
Steven O. Miller
“HP Desk Writer C Printer Driver
Development”, Hewlett Packard
Journal, Vol. 43, No. 4, August 1992,
pp 93-102
86. Alvina Y. Nishimoto,
William J Gray,
Barbara J. Williams
“An Interactive User Interface for
Material Requirements Planning”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 103-110
87. Lawrence A. Des Jardin “VXI : A standard for test and
Measurement System Architecture*
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 6-14
88. Steven J. Narciso and
Greygory Athill“The VXI Bus from An Instrument
Designers Perspective”
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 15-23
89. Paul B. Worrell “Design of Main Frame Firmware in an
Open Architecture Environment”
Hewlett Packard Journal, Vol. 43, No,2,
April 1992, pp 24.28
90. Christopher P. Kelly “Real Time Multitasking of Instruments
in the VXI Bus Command Modules”,
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 29-34
91. Lee Atchison “VXI Bus Programming in C”
Hewlett Packard Journal, Vol. 43, No. 2,
1993, pp 35-40
92 Sam S. Tsai, James B. Durr “Achieving High Throughput with
Resister based Dense Matrix
Relay Modules’\Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 41-51
93. Calvin L. Erickson
94. David P. Kjosness
95. Kenneth A. Ward
96. Larry L. Carlson,
Wayne H. Willis
97, Dieter Scherer, William
E. Strasser, James D.
Mcvey ,Wayne M. Kelly
98. Michael C. Fischer,
Michael J. Schossow
and Peter Tong
“Mass Interconnected for VXI bus
Systems”, Hewlett Packard journal,
Vol. 43, No. 2, April 1992, pp 52-58
“A Manufacturing Oriented Digital
Stimulus/Response Test Instrument”
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 59-68
“Digital Test Development Software for a
VXI bus Tester” Hewlett Packard journal,
Vol. 43, No. 2, April 1992, pp 69-74
“The VXI bus in a Manufacturing Test
Environment” Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 75-77
“The Peak Power analyzer, A new
Microwave Tool”, Hewlett Packard
Journal, Vol. 43, No. 4, April 1992,
pp 81-89
“GaAS Technology in Sensor and Base
Band Design”, Hewlett Packard Journal
Vol. 43, No. 2, April 1992, pp 90-94
99. David L. Barnard, Henry
Black,Jam es A. Thalmann
100. Koichi Yanagawa
101. Michael P. Movre and
Erse N. Gullerud
102. Karen Kerschen and
Jeffrey R. Glasson
103. Donald E. Bollinger,
Frank P.Lemmon
and Dawn L. Yamine
104. Robert C. Hansen
“Automatic Calibration for Easy and
Accurate Power Measurements”
Hewlett Packard Journal,Vol. 43,
No. 2, April 1992, pp 95-100
“An Advanced 5 Hz to 500 MHz Network
Analyzer with High Speed Accuracy and
DynamicRange”,Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 101-110
“A High Performance Measurement
Coprocessor for Personal Computers”
Hewlett Packard Journal, Vol. 43,
No.2,April 1992, pp 110-116
“HP-UX Operating System Kernal
Support for the HP 900 Series 700
Workstations”,Hewlett Packard Journal,
Vol. 43, No. 3, June 1993, pp 6-10
“Providing HP-UX Kernel Functionality
on a new PA-RISC Architecture”
Hewlett Packard Journal, Vol. 43,
No. 3, June 1993, pp 11-14
“New Optimization for PA-RISC
Compilers”,Hewlett Packard Journal,
105. Robert A. Gottlieb,
Daniel J.Mangeheimer,
Sue A Meloy
and Alan C. Meyer
“HP 9000 Series 700 FORTRAN
Optimizing preprocessor”
Hewlett Packard Journal, Vol. 43,
No. 3, June 1992, pp 24-32
106. Vasta Santhanam “Register Reassociation in PA-RISC
Compilers”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 33-38
107. Sridhar Ramakrishanan “Software Pipelining in PA-RISC
Compiler”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 39-45
108. Carry A. Countant and
Michelle A. Ruscetta
“Shared Libraries for HP-UX”
Hewlett Packard Journal, Vol. 43, No. 3,
June 1992, pp 46-53
109. Dianac Robert “Integrating an Electronic Dictionary
into a Natural Language Progessing
System”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 54-65
i 10. Dale D. Russell
I I I . Susan S. Spach and
Ronald W. Plley Blank
112. Zeid Ibrahim
113. H.P. Voelcker and
A.G. Requicha
114. E. E. Hartquist
115. W. H. P. Leslie (ed)
116. T. K. Kundra, P .N .R ao
‘ Application of Spatial Frequency
Methods to Evaluation of Printed
Images”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 68-75
“Parallel Ray Traced Image Generation”
Hewlett Packard Journal, Vol. 43,
No. 3, June 1992, pp 76-83
“CAD/CAM Theory and Practice”
McGraw Hill Book Co., Newyork, 1991
“Geometric Modelling of Mechanical
Parts and Processes”, IEEE Computer,
Vol. 10, December 1997, pp 48-57
“Public PADL - 2”,IEEE Computer
GR. and Appl., Vol. 3, No. 7,
October 1983, pp 30-31
“Numerical Control Users” Handbook,
McGraw Hill Publishing Company Ltd.,
Newyork, 1970
“Numerical Control and Computer Aided
Manufacturing”, II Reprint Edition,
Tata McGraw Hill Publishing
Company Ltd., New Delhi, 1988
“Numerical Control of Machine Tools”
E L B S , London, 1970
] 18. R. S. Pressman and “Numerical Control and Computer Aided
J. E. Williams Manufacturing”, John Wiley, Newyork,
1977
119. G.P. ChhaJotra, “Digital Computer Simulation of
A. N. Gavai, P. L. Juneja Chemical and Electrical Properties of
Mango, Eucalyptus and Ashok leaves
with R L C Measurements” ,
The Journal of the Institution of Engineers
(India), Vol. 67, Pt El - 3, December, 1986
120. G.P. Chhalotra, “Digital Computer Simulation of
A. N G avai, P. L. Juneja Chemical and Electrical Properties of
Green Leaves with Resistance
Measurements”, AMSE (France)
MS CB - Vol. 8, No. 4, 1987, pp 11-35
121. G. P. Chhalotra etal “Digital Simulation of Faults”
Fourth National Power System Conference
BHU, February 15-17,1986
122. G. P. Chhalotra etal “Digital Simulation of Complicated
Sequential Faults in three phase power
systems”, International Conference on
123. G.P. Chhalotra etal
124. G. P. Chhalotra,
B. K. Bhhat and
M. P. Chourasia
125. G. P. Chhalotra,
B. K. Bhat
126. G. P. chhalotra
Modelling and Simulation, Gorakhpur,
December 17-19, 1985, AMSE France
“Digital Computer Simulation of
Chemical and Electrical Properties of
Gulmohar, Kosham Sweet emly and
Kanak Champa Green Leaves with
RLC”, AMSE France, MSC - A,
Vol. 15, No. 4, 1988, pp l-26
“Digital Computer of Unsummetric
Unbalances of three phase power
networks using new frame sequence
components”, The Journal of The
Institution of Engineers (India), Vol. 57,
pt E l-6 , June, 1977, pp 247-57
“Digital Simulation of Complicated
Sequentially developed Simultaneous
Faults on three Phase Power Networks”
The Journal of The Institution of
Engineers (India), Vol. 6 1 ,P tE l-6 ,
June 1981, pp 1 -9
“A New Mathematical Analysis of Series
and Shunt Faults on three phase Power
Notworks” (Computer Simulation), The
Journal o f the Frankline Institute
Philadelphia (USA), vol. 302, No. 1 , July,
1976, pp 85-103
127. G. P. Chhalotra,
S. C. Tiwari“A New Component Method for Fault
Analysis in Three Phase Power
Networks”,(Computer Simulation),
International Journal o f Electrical
EngineermgEducation, 23,
pp53-63, Manchester, U.P., 1986,
Printed in Great Britain
128. B. Porter and Bradshaw “Design of Dead Beat Controllers and
Full Order Observers for Linear
Multivariate Discrete Time Plant”,
International Journal of Control,
Vol. 22, No. 2, 1975, pp 149-155
129. B. Gopinath “Bell System Technical Journal” ,
1971,50, 1063
130. Ichikawa “A Design of Discrete Time Dead Beat
Reduce Order State Observer”,
International Journal o f Control, 28, 731,
1978
“A Classification of Linear Controllable
System”, Kybemetica, 1970, 3, pp 173-187
133. G. D. Forney
134. D. G. Luenberger
135. K. Kimura
136. S. I. Ashon
137. Kunihika Ichikava
“Canonical Form for the Identification of
Linear Multivariate Systems”, IEEE,
Transactions, Automatic Control, AC-19,
1974, pp 646-656
‘‘Minimal Bases of Rational Vector
Spaces with Application to Multivariate
Linear systems”, SIAMJ, 1975, Control,
13, pp 439-520
“Canonical Forms for Linear
Multivariate Systems”, IEEE,Transaction,
Automatic Control, Ac-12,1967,pp 290-293
“Dead Beat Function Observers for
Discrete Time Linear Systems”, SIMJ,
1978, Control, 16, pp 880-894
“Microprocessor” with Application in
Process Control” (Book), Tata McGraw
Hill 1990, pp 219. Dead Beat algorithm
and z-transform based algorithm pp 218
“Discrete Time Fast Regulator with Fast
Observer”, International Journal o f Control,
Vol. 28, No. 5, 1978, pp 733-742
“Microcomputers in Material
Management” ,Wiley Eastern Ltd.,
New Delhi, 1991
139. M. M. Fammy, A. A. “On the Discrete Time Optimal Regulator
R. Hanafy, M. F. Sakr Contol Prolem”, Information and Contol,
44, 1980, pp 223-235
140. G. P. chhalotra,
G. M. Khan K.K. Soni,
V. Seema Chouhan,
R. Ekbote
“Reliability Attributes of Project
Management Under Dynamic Economic
System”, Proceeding of National Seminar,
Palakkad, Kerala, December 13-14, 1995
141. Tara Chand “Engineering Economics”
University o f Roorkee, S. Chand and
Company, 1996
142. G. P. Chhalotra “Electrical Engineering Economics”
(Book) Khanna Publishers, Delhi, 1997
143. D. K. Cheng “Analysis of Linear Systems” (Book)
Addition Wesley, Inc, Tokey, 1963
144. G. P. Chhalotra “Reliability in Engineering and
Applications” (Book),
Khanna Publishers, Delhi, 1986
“Linear Control Systems”(Book)
McGraw Hill, Delhi, 1984
146. E. Bala Guruswamy, “Indian Computing Congress Series :
B. Sushiia Computer Systems and Applications”,
Proceedings o f The Indian Computing
Congress held at Hyderabad,
November 22-24, 1990,
Tata McGraw Hill, New Delhi, 1990
147. R. Billinton “Reliability of Power Systems Analysis”
McGraw Hill Book Company, 1986
148. A. K. Govil “Reliability” (Book)
Prentice hall o f India, 1986
149. Kedar S. Agarwal,
A.K. Verma
“Software Reliability”
Interdesciplinaiy Programme in
Reliability Engineering, 1.1. T., Bombay,
1993
150, G. M. Khan etal “Reliability attributes of Project
Management Under Dynamic
Economic System”, Proceedings of
National seminar on Project Management,
The Institution o f Engineers (India) and
ISTE, December 23-24, 1995.
151. G. M. Khan ,
G. P. Chhalotra
152. G. M. Khan etal.
153. G. M. Khan etal.
154. G. M. Khan etal.
“Electronic Properties of Alloys under
High Pressure and study of Mass law
of Mixing”, Poster Presentation,
National Conference on High Pressure
Science & Technology, Guru Ghasidas
University, Bilaspur, December, 9-U , 1995
“Effects of Air Pollution on Phytoelectric
Parameters of Green Leaves and Various
Damages”, System Society o f India,
National systems conference, PSG College
o f Technology, Coimbator,December 14-16,
1995, proceeding
“Study of Solid, Liquid and Gases
Pollutants Their Mixtures and Effects on
the Quality of the Air” ,Third International
Conference on Environmental Planning and
Management, February 24-26, 1996, VRCE,
Nagpur
“Planning and Management of
Environmental Vectors through the dead
beat controllers and observers of
Pollution State Variable” ,
Proceedings of Third International
conference, VRCE, Nagpur,
Fabruaiy 24-26,1996, pp 470-473
156. G. M. Khan,
G. P. Chhalotra
157. G. M. Khan,
G. P. Chhalotra
158. G. M. Khan,
G. P. Chhalotra,
S. K. Dabadghao etal
“Probability of Failures and Reliability of
Power Systems Materials under Pollution
H azards” f System Society of India,
National System Conference, PSG
College o f Technology, Coimbatore,
December 14-16, 1995, Poster Presentation
“Reliability Attributes of Project
Management and Administration under
Dynamic Economic System”,
The Institution o f Engineers (India),
National Convention of Electrical
Engineers, Memo No. PLL/1470,
dt 30-10-96. Accepted for Presentation
“Microprocessor Management of P-f
and Q-v loops of Alternator using Dead
Beat Controllers and Observers”,
The Institution of Engineers (India),
N.C.E.E., Memo No. PLL/1470,
dt 30-10-96, Accepted for Presentation
“Microprocessor Management of electric
Power Station using z-transformation for
Dead Beat controller and Observer”, Ibid
Institution o f Engineers N.C.E.E,
Chandigarh, No. PLL/1470, Oct. 1996
160. G. M. Khan,
G. P. Chhalotra etal
161. G .M . Khan,
G. P. Chhalotra etal.
162. G. P. Chhalotra,
G. M. Khan etal.
163. G. M. Khan,
G. P. Chhalotra etal.
“Reliability Attributes of Computer Basic
Memory elements”, XIII M. P. Young
Science Congress, Gwalior, March 1998
“Study of Built in Reliability of
Microprocessors using Physical and
Effective Parameters of Materials and
Spaces”, The Institute of Engineers
(India) No. SP/T-185/ET/CS-89/20-11-96
Paper Considered
“Study o f Reliability Parameters of
Microprocessors Logic Gates Under
Material Parameters and Distribution
Functions”, AMSE, France, Demilune,
1998
“Fuzzy Computers and Their
Applications to Structural Material
Problems”, Paper No. 191, International
Conference, Accepted for Presentation
at MS-97 Victoria University,
Melbome, October 1997
“Fuzzy Technology a solution o f Pollution
Dynamics and their Effects on Human
Beings”, M S-97, Paper No. 190, Victoria
University, Melbome, Australia, October
1997
164. N. L. Prajapati, “Reliability Attributes of Electronics and
G. P. Chhalotra and Telecommunication Materials Under
G. M. Khan etal. Various Gases Pollutants”, International
Academy of Physical Sciences IAPS
(CONIAPS-96), October 14-15, 1996,
Accepted for presentation
165. G. M. Khan, ‘Effects of Air Pollution on the Reliability
G. P. Chhalotra, etal. of Power system”, Accepted for
Presentation and Published in the
Proceeding of VRCE Nagpur,
Third International Conference,
Code No. 0005, pp 540
* * * * * *