1
Refer to Current Charm ® Operator’s Manual for Complete Test Procedure 659 Andover Street, Lawrence, MA 01843-1032, USA T +1.978.687.9200 | F +1.978.687.9216 | E [email protected] | www.charm.com Read Result Test Procedure Filter Sample Charm Peel Plate ® Microbial Test Filtration Procedure (3) Aseptically pour sample into filter unit. (4) Vacum draw sample through filter. MRK-1078-001 Feb-2016 Remove Peel Plate test cover and observe the filter underneath. Count spots, colony forming units (CFU), in a plate after appropriate incubation time. The number of colonies counted on the filter is the number of bacteria per volume of filtered liquid. For example for 100 mL bottled water the number of spots is CFU/100 mL. AC EC YM (1) Set-up filteration apparatus grid side up. (1) Label clear side of plate. Do not label on the 47 mm circular test area. (2) Pull up cover to expose disk. Rehydrate with 1.5 mL of sterile water or prefered sterile broth in 2 to 3 seconds. Replace cover. (3a) Asceptically recover filter from filter apparatus using sterile tweezers. (3b) Lift rehydrated plate cover and roll filter, grid side up, onto prepared disc. (3c) Reapply adhesive cover. (4) Stack and incubate at appropriate incubation time. 47 mm circular area © 2016 Charm Sciences, Inc. Charm, and Peel Plate are registered trademarks of Charm Sciences, Inc. (2) Attach sterile filter cup for each new sample.

Refer to Current Charm Operator’s Manual for Complete Test ... · MRK-1078-001 Feb-2016 Remove Peel Plate test cover and observe the filter underneath. Count spots, colony forming

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Refer to Current Charm Operator’s Manual for Complete Test ... · MRK-1078-001 Feb-2016 Remove Peel Plate test cover and observe the filter underneath. Count spots, colony forming

Refer to Current Charm® Operator’s Manual for Complete Test Procedure

659 Andover Street, Lawrence, MA 01843-1032, USAT +1.978.687.9200 | F +1.978.687.9216 | E [email protected] | www.charm.com

Rea

d R

esul

tTe

st P

roce

dure

Filte

r Sam

ple

Charm Peel Plate® Microbial Test Filtration Procedure

(3)

Aseptically pour sample into filter unit.

(4)

Vacum draw sample through filter.

MRK-1078-001 Feb-2016

Remove Peel Plate test cover and observe the filter underneath. Count spots, colony forming units (CFU), in a plate after appropriate incubation time. The number of colonies counted on the filter is the number of bacteria per volume of filtered liquid. For example for 100 mL bottled water the number of spots is CFU/100 mL.

AC EC YM

(1)

Set-up filteration apparatus grid side up.

(1)

Label clear side of plate. Do not label on the 47 mm circular test area.

(2)

Pull up cover to expose disk. Rehydrate with 1.5 mL of sterile water or prefered sterile broth in 2 to 3 seconds. Replace cover.

(3a)

Asceptically recover filterfrom filter apparatus using sterile tweezers.

(3b)

Lift rehydrated plate cover and roll filter, grid side up, ontoprepared disc.

(3c)

Reapply adhesive cover.

(4)

Stack and incubate atappropriate incubation time.

47 mm circular area

© 2016 Charm Sciences, Inc. Charm, and Peel Plate are registered trademarks of Charm Sciences, Inc.

(2)

Attach sterile filter cup for each new sample.