Upload
hoangdat
View
213
Download
1
Embed Size (px)
Citation preview
The Game Changerin Meta l Treatment
Untreated
2 months usage
Picture of actual augers after 4 months pushing titanium chips
With TX Treatment
REDUCE FODThe vanes to the right are from turbocharger flow control rings.The part on the top was installed with a competitor’s coating, and the part on the bottom was TX-treated. Both turbochargers experienced foreign object damage (FOD), which resulted in drastically different results. We have since treated over 4 million parts for our customers.
make machinery last longer in harshenvironments by providing...
• High surface lubricity without oils • Dimensionally stable finished parts
• Outstanding wear resistance • Surface transformation to increase strength and resist spalling
• Anti-galling without adding brittleness • Applicability to either new parts or parts in service
TX treatments are unique thermal diffusion surface transformation technologies that improve the toughness of steel with-out creating brittleness. These improved characteristics transform lower cost materials so they either match or outperform more costly exotic alloys in high-wear applications.
TX treatments are not a coating. Instead of traditional surface coating methods, which are prone to brittle fractures and spalling, TX treatments work through both diffusion and crystal lattice transformation.
TX1 vs. TX2: Our scientists will assess your materials and engineering requirements, and select the appropriate treatment. TX2, the newest technology, can now treat castings and powder steels.
Wear resistance is usually achieved by hardening a surface. TX1 and TX2 take a different approach. By altering the crystal-line lattice of the steel, TX1 and TX2 eliminate wear at the nano level. Additionally, TX1 and TX2 overcome wear by transform-ing the surface chemistry of steel to work in conjunction with changes in the bulk matrix. Therefore, when an abrasive particle or opposing surface strikes TX treated steels, the wear energy is adsorbed and dissipated throughout the surrounding steel.
Untreated TX1 Treated
TURBOCAM Energy Solutions5 Faraday Drive, Dover, NH 03820 USA
[email protected] An affiliate of TURBOCAM
I N T E R N A T I O N A L
We tested two pieces of 304L stainless steel in a bearing tester. One piece of steel was treated with TX1 and the other was not. The piece that was untreated showed 500 times more wear and seized the motor. The test was performed at 1,750 RPM for 30 seconds using 75 lbs. of force, synthetic motor oil, and identical Rockwell hardness values (Rc=19) for the treated and untreated steel.
TX1: A Case Study
TX treatments dramatically increase the wear resistance properties for steel alloys in most applications.
TX treatments are a unique approach
What are TX1 & TX2?
Volu
me
Loss
(mm
3 )Lo
g Sc
ale
Untreated TX1
100
10
1
0.1
0.01