Upload
others
View
11
Download
1
Embed Size (px)
Citation preview
Micro-injection molding machine for LSR
MAXIMUM performance MINIMUM space
The smallest injection molding machine for LSR
Three ConfigurationsThe Babyplast LSR machine reduces the costs for equipment and moulds. It can be supplied in three different configurations:
- Cartridge system with a premixed 0.5 Kg cartridge;
- Loader mixer system with two 1 Kg cartridges (A+B components);
- Loader mixer system system for two 20 Kg containers (A+B components).
PrecisionWith Babyplast 6/10P LSR it is possible to obtain very precise parts, thanks to the reduced diameter of the injection piston (12,14,16,18mm) which gives the possibility to inject accurately and constantly very small grammes of material. It is also possible to move the injection unit off centre so as to obtain the best position for injection.
User Friendly
• Touch screen colour display• Easy to consult pages and user
friendly display• Handles and stores over 100 tool
settings• Back-up on USB memory drive• Record of last 20 cycles• Ethernet connections: modbus
TCP
seceip RSLpuorg noitcejni RSL LSR piecesLSR Pneumatic shuttle nozzle
babyplast LSR
Injection micro-molding machine for LSR
The smallest injection molding machines for LSR
MAXIMUM performance MINIMUM space The Babyplast LSR machine reduces the costs for equipment and molds. It can be supplied in three different configurations:
0.5 Kg CARTRIDGE PREMIX
• 0.5 Kg cartridge system with pre-mixed material
• It does not require a loader mixer to be installed on the machine
• Unique Babyplast solution allowing those who already own a loader mixer to fill the small cartridges, to produce small batches or samples at low costs
1 Kg CARTRIDGES (A+B)
• Pneumatic loader mixer with two 1 Kg cartridges for two components (A and B)
• Allows the use of Babyplast LSR with an autonomy of approx. 7-8 hours of production
• Optional coloring system
• Small mixer chamber with disposable mixing elements
20 Kg CONTAINERS (A+B)
• Pneumatic loader mixer for two components (A and B) with 20 Kg containers
• Allows the use of Babyplast LSR with an autonomy of a few days of production
• Optional coloring cartridge
Micro-injection molding machine for LSR
MAXIMUM performance MINIMUM space
The smallest injection molding machine for LSR
Three ConfigurationsThe Babyplast LSR machine reduces the costs for equipment and moulds. It can be supplied in three different configurations:
- Cartridge system with a premixed 0.5 Kg cartridge;
- Loader mixer system with two 1 Kg cartridges (A+B components);
- Loader mixer system system for two 20 Kg containers (A+B components).
PrecisionWith Babyplast 6/10P LSR it is possible to obtain very precise parts, thanks to the reduced diameter of the injection piston (12,14,16,18mm) which gives the possibility to inject accurately and constantly very small grammes of material. It is also possible to move the injection unit off centre so as to obtain the best position for injection.
User Friendly
• Touch screen colour display• Easy to consult pages and user
friendly display• Handles and stores over 100 tool
settings• Back-up on USB memory drive• Record of last 20 cycles• Ethernet connections: modbus
TCP
seceip RSLpuorg noitcejni RSL LSR piecesLSR Pneumatic shuttle nozzle
babyplast LSR
Injection micro-molding machine for LSR
babyplast LSR
Injection micro-molding machine for LSRLSR parts
LSR parts
610P LSR Technical Data
General Data Unit
Piston Diameter Min-Max (optional) mm
Volume cm3
Injection Pressure Max 1) bar
Power Consumption kW
Clamping Force kN
Opening Force kN
Opening Stroke mm
Ejector Force kN
Ejector Stroke mm
Hydraulic Pressure bar
Oil Tank Capacity L
Dry Cycle sec
Noise Level db
Weight kg
Power Supply
Standard
12 - 14 - 16 - 18
6.8 - 9.2 - 12 - 15
1,830 - 1,340 - 1,030 - 815
3
62
4
110
7.5
50
130
15
2.4
<70
150
3 ~ 400V. 50/60 Hz. + Neutral + Earth3 ~ 230V. 50/60 Hz. + Earth1 ~ 230V. 50/60 Hz. + Earth (special order)
Precision
User Friendly
With Babyplast 6/10P LSR it is possible to obtain very precise parts, thanks to the reduced
diameter of the injection piston (12, 14, 16, 18mm) which gives the possibility to inject
accurately and constantly very small grams of material. It is also possible to move
the injection unit off center so as to obtain the best position for injection.
Micro-injection molding machine for LSR
MAXIMUM performance MINIMUM space
The smallest injection molding machine for LSR
Three ConfigurationsThe Babyplast LSR machine reduces the costs for equipment and moulds. It can be supplied in three different configurations:
- Cartridge system with a premixed 0.5 Kg cartridge;
- Loader mixer system with two 1 Kg cartridges (A+B components);
- Loader mixer system system for two 20 Kg containers (A+B components).
PrecisionWith Babyplast 6/10P LSR it is possible to obtain very precise parts, thanks to the reduced diameter of the injection piston (12,14,16,18mm) which gives the possibility to inject accurately and constantly very small grammes of material. It is also possible to move the injection unit off centre so as to obtain the best position for injection.
User Friendly
• Touch screen colour display• Easy to consult pages and user
friendly display• Handles and stores over 100 tool
settings• Back-up on USB memory drive• Record of last 20 cycles• Ethernet connections: modbus
TCP
seceip RSLpuorg noitcejni RSL LSR piecesLSR Pneumatic shuttle nozzle
• Touch screen color display• Easy to consult pages and user friendly display• Handles and stores over 100 tool settings• Back-up on USB memory drive• Record of last 20 cycles• Ethernet connections: modbus TCP
Micro injection molding machines for LSR
Dimensions of machine platens
122140173
7
63
77,5
20 20
70(95)11018080
550
45Hub
94,3
98
R16
R22,5
63
77,5122140173
221
86,5
25
35
75Hub Stroke 45 Stroke 75
elacs ot ton si gni
warD
5102/11/91 deta
dpu e
mit yna ta snoitacifido
m ekam ot th
gir eht evreser eW
Dimensions of machine platens
Micro-injection molding machine 6/10P LSR
PISTON DIAMETER mm 10 12 14 16 18VOLUME cm³ 4,7 6,8 9,2 12 15INJECTION PRESSURE bar 2.025 1.830 1.340 1.030 815POWER CONSUMPTION 3WkCLAMPING FORCE 26NkOPENING FORCE 4NkOPENING STROKE 011mmEJECTOR FORCE 5,7NkEJECTOR STROKE 05mmHYDRAULIC PRESSURE 031rabOIL TANK CAPACITY 51LDRY CYCLE 4,2cesNOISE LEVEL 07<bdWEIGHT 051gkPOWER SUPPLY 3 ~ 400V. 50/60 Hz. + Neutral + Earth
3 ~ 230V. 50/60 Hz. + Earth1 ~ 230V. 50/60 Hz. + Earth
610P LSRTechnical Data
Micro-injection molding machine for LSR
MAXIMUM performance MINIMUM space
The smallest injection molding machine for LSR
Three ConfigurationsThe Babyplast LSR machine reduces the costs for equipment and moulds. It can be supplied in three different configurations:
- Cartridge system with a premixed 0.5 Kg cartridge;
- Loader mixer system with two 1 Kg cartridges (A+B components);
- Loader mixer system system for two 20 Kg containers (A+B components).
PrecisionWith Babyplast 6/10P LSR it is possible to obtain very precise parts, thanks to the reduced diameter of the injection piston (12,14,16,18mm) which gives the possibility to inject accurately and constantly very small grammes of material. It is also possible to move the injection unit off centre so as to obtain the best position for injection.
User Friendly
• Touch screen colour display• Easy to consult pages and user
friendly display• Handles and stores over 100 tool
settings• Back-up on USB memory drive• Record of last 20 cycles• Ethernet connections: modbus
TCP
secei p RSL puor g noit cej ni RSLLSR pieces LSR Pneumatic shuttle nozzle
LSR Injection Group
LSR Pneumatic shut-off nozzle