Upload
emily-kelly
View
220
Download
1
Tags:
Embed Size (px)
Citation preview
ReadyNASL2 Training Session 1(Pre-Sales, chassis and Wizard Install)
Presented by XXX
May 31, 2007
ReadyNAS Overview
3.© 1996-2006 NETGEAR® . All rights reserved
What is the ReadyNAS?
» The ReadyNAS is a Network Attached Storage device (NAS)» It allows for centralized data storage for use or backup» It does not require leaving a workstation or server running» It can be accessed from the internet(with correct router
configuration)» Windows, Mac, Linux, and Unix are supported
4.© 1996-2006 NETGEAR® . All rights reserved
ReadyNAS Features» RAID
• X-RAID™ technology plus Flex-RAID 0, 1, 5
» Gigabit Ethernet connection• NV+ Incorporates a Gigabit Ethernet connection to enhance network performance• 1100 incorporates Dual Gigabit Ethernet connections to enhance network performance and include
redundancy
» Hot swappable and lockable trays
» Volume management • Single volume auto expansion (X-RAID) • Journaled file system • Snapshot with scheduling • User, group, and share-level quotas
» PC disk backups• Retrospect backup software bundled with unit.
» Uses SATA drives• Uses SATA drives instead of PATA drives to enhance network performance
5.© 1996-2006 NETGEAR® . All rights reserved
Minimum System Requirements
» An Ethernet network
» At least 1 Hard Drive• SATA (Serial ATA) • 1” height, 3.5” wide
» Supported Clients• Windows, Mac, Linux/UNIX Clients
» Optional• DHCP server
6.© 1996-2006 NETGEAR® . All rights reserved
Package Contents
Chassis
NV+ Chassis Overview
9.© 1996-2006 NETGEAR® . All rights reserved
NV+ external chassis Features
10.© 1996-2006 NETGEAR® . All rights reserved
NV+ Drive Removal
11.© 1996-2006 NETGEAR® . All rights reserved
NV+ Easy Drive Install
1100 Chassis Overview
13.© 1996-2006 NETGEAR® . All rights reserved
1100 external chassis Features
14.© 1996-2006 NETGEAR® . All rights reserved
1100 Easy Drive Install
Product ComparisonThe following information includes the current NV+ and 1100 products, as well as the x6/600 and 1000s legacy products.
16.© 1996-2006 NETGEAR® . All rights reserved
SAN versus NAS, Key difference?
» Many file systems are used including Linux, NTFS, FAT
» Almost any client can directly access the NAS using CIFS/SMB
» Volumes mounted as network volumes
» No possible driver conflicts on the client system, since no drivers are required
» Uses a proprietary SAN file system (example SFS)
» Requires a dedicated driver on the client system
» Volumes mounted as “physical drives” on client
» Client driver may conflict with other software on client PC
NAS SAN
17.© 1996-2006 NETGEAR® . All rights reserved
ReadyNAS NV+ Highlights» 4 lockable hot-swappable SATA disk trays » Netgear Expandable X-RAID, RAID 0/1/5 » Programmable backup button » One USB 2.0 port in front, two in back » Compact portable design (8"H x 5"W x 9"D) » LCD panel for instant status readout » Server-rated power supply with noise-killer design for quieter operation » Powerful 92mm cooling fan » Low power consumption and power saving mode » Compatible with Windows®, Mac, UNIX, and Linux systems » Gigabit Ethernet with Jumbo frame support » Integrated Backup Manager » Compatible with leading network DVD players and UPnP AV streaming devices » Multi-lingual browser-based setup » Kensington lock compatible » EMC® Retrospect® backup software for Windows (5-client license) included
18.© 1996-2006 NETGEAR® . All rights reserved
ReadyNAS 1100 Highlights
» Enterprise Hardened embedded Linux operating system (No additional software to install or per-user licensing requirements)
» 3 Security modes (Share, User, Domain for ADS Integration) » RAIDar and SNMP support for centralized management » Native support for Windows, Mac, UNIX and Linux clients » System Monitoring with Email Alerts » Journaling File System » Typical 75 Watt Power Consumption with 4x750 GB Drives » (A 20 AMP Rack = 30 1100’s or 90 Terabytes of Storage!) » 1U form factor & 12 inch depth facilitates back-to-back mounting » Hardware RAID Acceleration (RAID 0, 1, 5, X-RAID) » Sequenced HDD Power On » Dual Gigabit Interfaces » Field Serviceable Chassis with X-Change - Rapid System Board Replacement
Module
19.© 1996-2006 NETGEAR® . All rights reserved
General Specs and Performance» Memory is
upgradeable per HCL specifications
» Performance is based on benchmarks using IOMeter
» Performance is measured on a gigabit network with jumbo frames
20.© 1996-2006 NETGEAR® . All rights reserved
Disks/Volumes Supported and Networking
» Both current models support the same volume types
» The 2nd network interface on the 1100 is not for redundancy or “teaming”/load balancing
» Wireless networking is supported by using USB wireless adapters as listed on the HCL
» The ReadyNAS cannot be connected to a workstation or server to act as a USB hard drive
21.© 1996-2006 NETGEAR® . All rights reserved
Management, Monitoring, Services, Security
» UPS monitoring requires a USB UPS device from the HCL
» Email alerts require configuration in Frontview web interface
» NFS is currently only supported over UDP, not TCP
» Domain security mode requires an already established domain or active directory environment
22.© 1996-2006 NETGEAR® . All rights reserved
Backup
» EMC Insignia handles support for the Retrospect application
» The integrated backup manager is configured from Frontview
» USB drives formatted as HFS(Mac OSX format) are not supported
23.© 1996-2006 NETGEAR® . All rights reserved
Network media streaming» All ReadyNAS products
support the following media streaming protocols: Slimserver, iTunes, UPNP-AV
» Devices compatible with these protocols are compatible with the ReadyNAS, the HCL has a basic list of devices
» Not all network media devices require the above protocols and will use a standard file protocol instead
24.© 1996-2006 NETGEAR® . All rights reserved
Physical Dimensions and Power Usage
» The 1100 is a rackmount 1U form-factor
» The 1100 does not require 4 post mounting with rails
» Power consumption is far less than traditional workstation or server
Business VS. Home usageThe following portion will detail the key differences and let you know which products are suitable for either a business or home environment
26.© 1996-2006 NETGEAR® . All rights reserved
ReadyNAS NV+ in the Home and Workplace
» Small footprint for easy placement
» Nearly quiet cooling system» Easy to use LCD status
display
Home Workplace» Quiet cooling does not
require placement in server room
» Transportable unit allows for easy movement depending on user’s needs
» Small size means multiple units can be placed throughout office for usage in small workgroups
27.© 1996-2006 NETGEAR® . All rights reserved
ReadyNAS 1100 in the Home and Workplace
» Extremely loud cooling system may require
» placement in dedicated equipment closet.
» Dual ethernet rarely needed for home use
» Most users do not have server rack for installation
Home Workplace» Easy installation into
existing server rack» 1U half-depth form-factor
allows for back-to-back installation in 4 post server rack for increased storage
» Dual ethernet supports use on multiple networks
» Modular chassis allows for easy maintenance without removal from server rack
RAID (Redundant Array of Independent Disks). A collection of disk drives that offers increased performance and fault tolerance. There are a number of different RAID levels. The three most commonly used are 0, 1, and 5
What is RAID?
29.© 1996-2006 NETGEAR® . All rights reserved
What is Raid 0
· RAID 0: Striped Set (2 disks minimum)
without parity: provides improved
performance and additional storage but no
fault tolerance from disk errors or disk
failure.
30.© 1996-2006 NETGEAR® . All rights reserved
» · RAID 1: Mirrored Set (2 disks minimum) » without parity: provides fault tolerance » from disk errors and single disk failure.» Increased read performance occurs» when using a multi-threaded operating» system that supports split seeks,» very small performance reduction » when writing. Array continues to » operate so long as at least one drive » is functioning.
What is Raid 1
31.© 1996-2006 NETGEAR® . All rights reserved
What is Raid 5
» · RAID 5: Striped Set (3 disk minimum) with Distributed Parity: Distributed parity requires all but one drive to be present to operate; drive failure requires replacement, but the array is not destroyed by a single drive failure. Upon drive failure, any subsequent reads can be calculated from the distributed parity such that the drive failure is masked from the end user. The array will have data loss in the event of a second drive failure and is vulnerable until the data that was on the failed drive is rebuilt onto a replacement drive.
FlexRAID and X-RAID(The ReadyNAS supports two different types of RAID)
33.© 1996-2006 NETGEAR® . All rights reserved
Flex-RAID
» Flex-RAID is “FLEXible”• it supports industry standard RAID levels 0, 1, and 5• up to 4 volumes are supported (2 partitions from each drive can be used)• disks can be manually specified as being a part of the RAID volume• hot spares can be specified for RAID 1 and 5
» Utilizes disk striping in RAID 0 and 5• striping provides good performance when data is scattered (i.e. small files)• when two disks fail, almost impossible to recover data• parallel access allows better handling of disk fragmentation
» Expansion supported via additional volume(s)• each disk can be replaced with a larger capacity one• new RAID volume can be created using unused space from new disks
» RAID format compatible with Linux MD RAID• allows for data recovery using Linux
34.© 1996-2006 NETGEAR® . All rights reserved
FlexRAID: RAID-0,1, and 5
» FlexRAID allows users to specifically choose which RAID type they want
» FlexRAID allows for using a “hot-spare” for automated failover during drive failure
» FlexRAID mode does not allow for expansion by adding more drives
35.© 1996-2006 NETGEAR® . All rights reserved
What is X-RAID
X-RAID is our proprietary RAID technology, that allows automated volume management and expansion
» X-RAID is “eXpandable”• X-RAID volumes can be started with 1, 2, 3 or 4 drives, with additional drives added at a
later time. (horizontal expansion)• X-RAID allows users to begin with smaller drives, and then upgrade later to larger drives
and gain additional volume capacity (vertical expansion)» X-RAID is similar to RAID 5 in that parity data is used to recover in the event of a drive
failure» X-RAID volumes can be started with 1, 2, 3 or 4 drives, with additional drives added at a
later time. (horizontal expansion)» X-RAID allows users to begin with smaller drives, and then upgrade later to larger drives
and gain additional volume capacity (vertical expansion)» X-RAID allows expansion without having to shuffle data between systems
36.© 1996-2006 NETGEAR® . All rights reserved
X-RAID Expansion – what the user sees
» “Horizontal” expansion• Start with a one-disk volume• Add 2nd disk, volume becomes
redundant (2nd disk mirrors 1st)• Add 3rd disk, let it initialize and
reboot -- volume capacity doubles while preserving volume content and redundancy
• Add 4th disk, let it initialize and reboot -- volume capacity triples while preserving volume content and redundancy
100 GB 100 GB 100 GB
Total Capacity: 100 GB200 GB300 GB
37.© 1996-2006 NETGEAR® . All rights reserved
X-RAID Expansion – what the user sees
» “Vertical” expansion• Start with a volume of 2 or more
disks• Replace each disk with a larger
one, let it initialize and sync !before! adding the next drive
• Reboot to grow volume size to utilize newly added space while preserving volume content and redundancy
100 GB 100 GB 100 GB
Total Capacity: 100 GB200 GB300 GB
200 GB 200 GB 200 GB
600 GB
Frontview, RAIDar, and RAIDiator
39.© 1996-2006 NETGEAR® . All rights reserved
Frontview
40.© 1996-2006 NETGEAR® . All rights reserved
Frontview» Frontview is the name for the web interface allowing
administration and management of the ReadyNAS products» Frontview configuration is the same on all products» There is a setup wizard available for first time users» Advanced users may switch to an advanced mode allowing for
additional configuration options» Frontview allows for configuring network settings, security mode,
user accounts, available shares, and share permissions.» Frontview also has detailed information regarding the status of
the unit and volume health
41.© 1996-2006 NETGEAR® . All rights reserved
RAIDar
» RAIDar is a simple monitoring tool allowing users to monitor multiple NAS units in a single application
» RAIDar is used in the initial setup to indicate volume type during a factory default operation
» Color coded status indicators will let administrators know at a glance if an issue has arisen, such as a failed fan or hard drive
42.© 1996-2006 NETGEAR® . All rights reserved
RAIDiator (operating system)
» RAIDiator is a customized version of Linux allowing for far more security than available on Windows based NAS units.
» RAIDiator is the same on all ReadyNAS products» RAIDiator can be updated from within Frontview» Presently Frontview is the only means to access RAIDiator, SSH
access is planned for a future update.
43.© 1996-2006 NETGEAR® . All rights reserved
Example of Shipping SKU’s
NV+- RND4250 (2x500GB)- RND4425 (4x250GB)- RND4450 (4x500GB)
1100- RNR4475 (4x750GB)- RNR4450 (4x500GB)
44.© 1996-2006 NETGEAR® . All rights reserved
Additional Support Material
» All Documentation• http://www.readynas.com/?page_id=128
» All Software• http://www.readynas.com/?page_id=102
» WIKI• http://www.readynas.com/
45.© 1996-2006 NETGEAR® . All rights reserved
Questions
?