RAUVITHERM AND RAUTHERMEXPRE-INSULATED PIPES FOR DISTRICT HEATINGPARTS LIST

ENERGYEFFICIENCY

Building SolutionsAutomotive

Industry

Valid from 01. April 2014 817302 ENSubject to Technical Alterationswww.rehau.uk/districtheating

GENERATE YOUR OWN HEAT USING REHAU SOLUTIONS

The path to renewable energy supply

RAUVITHERMFERMENTER HEATINGGAS CONDENSATION CHAMBERRAUTHERMEXHOUSE ENTRY

2

CONTENTS PAGE

1 � � � � � RAUTHERMEX Pre-insulated Pipe, SDR 11 � � � � � � � � � 5

2 � � � � � RAUTHERMEX Shroud Kits � � � � � � � � � � � � � � � � � 6

3 � � � � � REHAU Lead-in Bends and House Entries � � � � � � � � � � 8

4 � � � � � RAUVITHERM Pre-insulated Pipe, SDR 11� � � � � � � � � 15

5 � � � � � RAUVITHERM Screw Fittings � � � � � � � � � � � � � � � 16

6 � � � � � RAUVITHERM Shroud Kits � � � � � � � � � � � � � � � � � 17

7 � � � � � REHAU Lead-in Bends and House Entries � � � � � � � � � 19

8 � � � � � Special Accessories� � � � � � � � � � � � � � � � � � � � 22

9 � � � � � REHAU EVERLOCTM

Jointing Technology, SDR 11 � � � � � 23

GENERATE YOUR OWN HEAT USING REHAU SOLUTIONS

3

4

1 RAUTHERMEX PRE-INSULATED PIPE, SDR 11

RAUTHERMEX, SDR11

Suitable up to max. 95°C and 6 bar, comprising: - carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN 4726 - insulation made of continuously manufactured (160 discontiniously produ- ced) CFC-free polyurethane foamed PU and a grey corrugated, seamlessly extruded polyethylene (PE-LLD) outer jacket- Delivery in coils.

UNO Pipe Article Nr� Size d s D [kg/m] max� coil length [m]

2,8 m x 0,8 m 2,8 m x 1,2 m352161-001 25/91 25 2,3 93 1,28 370 570352171-001 32/91 32 2,9 93 1,38 370 570352181-001 40/91 40 3,7 93 1,48 370 570352191-001 50/111 50 4,6 113 2,11 275 400352201-001 63/126 63 5,8 128 2,86 195 305352211-001 75/162 75 6,8 163 4,37 95 150352221-001 90/162 90 8,2 163 5,02 95 150352231-001 110/162* 110 10,0 163 5,78 95 150352241-002 125/182* 125 11,4 184 7,20 52 86303867-001 140/202* 140 12,7 202 8,38 46 75352251-001 160/250* 160 14,6 250 14,14 12 m cut length* From d > = 110 mm – carrier pipe, use lubricant for compreession sleeves

DUO Pipe Article Nr� Size d s D [kg/m] max� coil length [m]

2,8 m x 0,8 m 2,8 m x 1,2 m352261-001 25 + 25/111 25 2,3 113 1,85 275 400352271-001 32 + 32/111 32 2,9 113 2,11 275 400352281-001 40 + 40/126 40 3,7 128 2,75 195 305352291-001 50 + 50/162 50 4,6 163 4,25 95 150352301-001 63 + 63/182 63 5,8 184 5,45 52 86

UNO Plus Pipe

Article Nr� Size d s D [kg/m] max� coil length [m]2,8 m x 0,8 m 2,8 m x 1,2 m

352885-001 32/111 32 2.9 113 1,69 275 400352895-001 40/126 40 3.7 128 2,18 195 305352905-001 50/126 50 4.6 128 2,64 195 305352915-001 63/142 63 5.8 143 3,49 140 225352925-001 90/182 90 8.2 184 5,14 52 86352935-001 110/182* 110 10.0 184 6,24 52 86* From d > = 110 mm – carrier pipe, use lubricant for compreession sleeves

DUO Plus Pipe

Article Nr� Size d s D [kg/m] max� coil length [m]2,8 m x 0,8 m 2,8 m x 1,2 m

352945-001 32 + 32/126 32 2,9 128 2,50 195 305352955-001 40 + 40/142 40 3,7 143 3,32 140 225352965-001 50 + 50/182 50 4,6 184 4,90 52 86356612-001 63 + 63/202 63 5,8 202 5,90 46 75

D

d

D

5

2 RAUTHERMEX SHROUD KITS

RAUTHERMEX T-Shroud for t-pieces

Includes:- Sleeve casing set II 76/126 in ABS (76/126 or 76/182))- Clips in POM (16 or 27)- 3 self ventilating sleeve plugs in POM- 1 sleeve adhesive- Assembly instructions

To adapt the T-shroud to different RAUTHERMEX outer jacket diameters, 3

sealing rings of the corresponding size must be used.

Article Nr� T-Shroud Pipe Outer Jacket Diameter L H Weight

1 2 3 [mm] [mm] [kg]297932-001 Small 76 - 126 76 - 126 76 - 126 585 380 2,82351054-001 Large 76 - 182 76 - 182 76 - 182 740 500 8,00

RAUTHERMEX I-Shroud Set for straight connectionsIncludes:- Sleeve casing set II in ABS- 12 or 22 clips in POM- 2 self ventilating sleeve plugs in POM- 1 sleeve adhesive- 1 Assembly intsructions

To adapt the I-shroud to different RAUTHERMEX outer jacket diameters, 2 sealing rings of the corresponding size must be used.

Article Nr� I-Shroud Pipe Outer Jacket Diameter L Weight

1 2 [mm] [kg]351067-001 Small 76 - 126 76 - 126 580 2,08352038-001 Large 76 - 182 76 - 182 752 4,50

RAUTHERMEX L-Shroud Set for elbow connectionsIncludes:- Sleeve casing set II in ABS- 14 or 22 clips in POM- 2 self ventilating sleeve plugs in POM- 1 sleeve adhesive- 1 Assembly instructionsTo adapt the L-shroud to different RAUTHERMEX outer jacket diameters, 2 sealing rings of the corresponding size must be used

Article Nr� L-Shroud Pipe Outer Jacket Diameter L H Weight1 2 [mm] [mm] [kg]

351068-001 Small 76 - 126 76 - 126 380 380 2,16352039-001 Large 76 - 182 76 - 182 508 508 4,40

6

RAUTHERMEX Coupling Shroud Kits - Special ApplicationsFor connecting RAUTHERMEX and/or steel pre-insulated pipesComplete, comprising:- PE moulding- Abrasive belt- Heat-shrink tubing- Air bleeding valves- including PUR-foam

Article Nr� Coupling Shroud Kit Pipe Diameter of Sheath L Weight

1 2 [mm] [kg]215627-001 Special Application 182 250 600 3,90215628-001 Special Application 202 250 600 3,90298822-001 Special Application 250 250 600 4,00

RAUTHERMEX Sealing RingsTo adjust the RAUTHERMEX T Shroud Kit Mk II to the RAUTHERMEX Pipes.Each branch of the T-Shroud is to be sealed off with the relevant sealing ring.The type of sealing ring equals to the type of pipe.(Internal diameter of sealing ring = Outer diameter of the pipe)

Material:EPDM Article Nr� for shroud Type Weight [kg] Delivery Unit214348-001 small 91 0,310 1 piece214347-001 small 111 0,198 1 piece297930-001 small 126 0,096 1 piece351056-001 large 91 1,030 1 piece351057-001 large 111 0,990 1 piece351058-001 large 126 0,900 1 piece351059-001 large 142 0,860 1 piece351061-001 large 162 0,820 1 piece351062-001 large 182 0,624 1 piece

REHAU PU FoamComprising of:

- Foam bottle component A- Foam bottle component B- Measuring cap- Instruction Manual

For safety cautions, please read the assembly instructions and data sheets. Contact your local Sales Office for more information. Article Nr� for Size [kg/piece]351878-001 RAUTHERMEX I- and L-shroud small 4 0,95298357-001 RAUTHERMEX T-shroud small 5 1,00352413-001 RAUTHERMEX I- and L-shroud large 8 1,70351063-001 RAUTHERMEX T-shroud large 9.1 2,30

Article Nr� L-Shroud Pipe Outer Jacket Diameter L H Weight1 2 [mm] [mm] [kg]

351068-001 Small 76 - 126 76 - 126 380 380 2,16352039-001 Large 76 - 182 76 - 182 508 508 4,40

7

3 REHAU LEAD-IN BENDS AND HOUSE ENTRIES

REHAU Pre-fabricated Pipe Bend SDR 11Suitable up to max. 95°C and 6 bar, comprising:- a bent carrier pipe made of cross-linked polyethylene (PE-Xa) as per DIN 16892/92 and an oxygen diffusion barrier as per DIN 4726.- Insulation with CFC-free, pentane-driven polyurethane foamed PU.- Black PE-HD jacket pipe- Elbow made up of segments produced by means of contact weldingPipe bend length: 1,1 m x 1,6 m.Free laying pipe ends: 250 mm. Pre-fabricated pipe UNO

Article Nr� Type Carrier pipe Outer Dia� Radius [kg/piece]d s D R

240004-001 25/91 25 2,3 91 138 2,85240064-001 32/91 32 2,9 91 141 3,07240074-001 40/91 40 3,7 111 175 3,47240084-001 50/111 50 4,6 111 200 4,92240094-001 63/126 63 5,8 126 200 6,50240054-001 75/162 75 6,8 162 240 8,47240114-001 90/162 90 8,2 184 - -240124-001 110/162 110 10,0 162 345 14,23222827-001 125/182 125 11,4 184 - 16,03

Pre-fabricated pipe DUO

Article Nr� Type Carrier pipe Outer Dia� Radius [kg/piece]d s D R

240194-001 25 + 25/111 2 x 25 2,3 111 138 4,71240224-001 32 + 32/111 2 x 32 2,9 111 141 4,67240234-001 40 + 40/126 2 x 40 3,7 126 175 7,42240244-001 50 + 50/162 2 x 50 4,6 162 200 9,90243788-001 63 + 63/182 2 x 63 5,8 182 200 13,20

RAUTHERMEX Pre-fabricated Steel Pipe BendRAUTHERMEX Pre-fabricated pipe bend SDR 11 for hot watertransportation. Suitable up to max. 95°C and 6 bar. comprising:- pre-insulated carrier pipe made of steel- Two welded REHAU connectors. Dim: 160 x 14.6mm or 140 x 12.7 mm- Two REHAU compression sleeves

Material:Carrier Pipe: Steel St 37.0Insulation: CFC-free PU foamOuter jacket: Polyethylene (PE-HD)Bend length: 1,1 x 1,1 m Article Nr� Type Dimension Dimension Outer Dia� [kg/piece]

Connector Compression Sleeve D209138-001 140/225 140 x 12,7 - 139,7 x 3,6 140 x 12,7 225 70,00201227-001 160/250 160 x 14,6 - 168,3 x 4,1 160 x 14,6 250 80,00

8

REHAU Wall Sealing Ring (dry)Watertight up to 2m water column.Suitable as a building inlet through masonry, in conjunction withexpansive mortar for non-pressured water.It comprises of a profiled neoprene ring to fit. Suitable for standard RAUTHERMEX sizes.For Plus sizes, the wall sealing ring must fit the respective outer diameter.

Article Nr� D (mm) Da (mm) For Dimension RAUTHERMEX [kg/piece]

Uno Duo240363-001 91 133 25, 32, 40 0,40240373-001 111 153 50 25, 32 0,50240383-001 126 168 63 40 0,50240403-001 162 203 75, 90, 110 50 0,70239101-001 182 223 125 63 0,80353278-001 202 234 140 0,90298818-001 250 286 160 1,00

9

RAUTHERMEX Wall Sealing Ring FA 80Suitable as a seal through concrete and in the casing pipe throughmasonry where water pressure exists (up to 15m water column), comprising of:- comprising seal rubber EDPM Shore 40° ± 5°- seal plates and screws made of V2A- seal rubber in accordance with the KTW recommendationFor secure sealing and adequate stabilisation of the pipes, the wallsealing flange FA 40 in a feed-through duct is also recommended.Width (B) approx. 90mm. Wall Sealing Ring 80 mm

Article Nr� RAUTHERMEX Sealing Application Sealing Application Core HolesOuter Jacket [mm] Torque Width across flats Internal Diameter Da

Di [mm] [Nm] [mm] [mm]285421-001 76 5 10 125 ± 2285431-001 91 5 10 150 ± 2285441-001 111 10 13 200 ± 2285451-001 126 10 13 200 ± 2285461-001 142 10 13 200 ± 2285471-001 162 10 13 250 ± 2285481-001 182 10 13 250 ± 2298812-001 250 10 13 350 ± 3

RAUTHERMEX Wall Sealing Ring FA 40Suitable as a seal through concrete and in the casing pipe throughmasonry where water pressure exists (up to 5m water column), comprising of:- seal rubber EDPM Shore 40° ± 5°- seal plates and screws made of V2A- seal rubber in accordance with the KTW recommendationFor adequate stabilisation of the pipes, two wall sealing flanges FA 40in a feed-through duct are recommended.Width (B) approx. 45mm. Wall Sealing Ring 40 mm

Article Nr� RAUTHERMEX Sealing Application Sealing Application Core HolesOuter Jacket [mm] Torque Width across flats Internal Diameter Da

Di [mm] [Nm] [mm] [mm]285491-001 76 5 10 125 ± 2285501-001 91 5 10 150 ± 2285511-001 111 10 13 200 ± 2285521-001 126 10 13 200 ± 2285531-001 142 10 13 200 ± 2285541-001 162 10 13 250 ± 2285551-001 182 10 13 250 ± 2298815-001 250 10 13 350 ± 3

10

RAUTHERMEX Casing PipeSuitable for wall sealing flanges FA 40 and FA 80.With a heavily roughened surface for sealing securely against masonryor concrete, casing pipe can be embedded in concrete together withformwork supports in concrete building structures.Material: PVC RAUTHERMEX Casing Pipe

Article Nr� Description ID AD Length Weight[mm] [mm] [mm] [kg]

222774-001 Pipe Sleeve 125 125 131 600 1,19222784-001 Pipe Sleeve 150 150 160 600 1,95222794-001 Pipe Sleeve 200 200 210 600 2,76222804-001 Pipe Sleeve 250 250 280 600 9,41

Pipe Sleeve Protective CapFor fixing the casing pipes in concrete wall formwork.Material: PE-LD Colour: Yellow Pipe Sleeve Protective Cap

Article Nr� Description ID AD Length Weight[mm] [mm] [mm] [kg]

222814-001 Pipe sleeve protective cap 125 125 205 20 0,067222824-001 Pipe sleeve protective cap 150 150 245 20 0,102222834-001 Pipe sleeve protective cap 200 200 300 18 0,152222844-001 Pipe sleeve protective cap 250 250 395 18 0,294

Epoxy ResinThe epoxy resin kit comprises a two-component epoxy resin withdrinking water approval in accordance with the KTW recommendationfor sealing the concrete or masonry. Also included are a brush(length approx. 40cm) and a pair of latex gloves. Please observe theassembly instructions (included in the set) and safety datasheets(on request). Epoxy Resin-KIT

Article Nr� Content Area Covered Weight [kg]222854-001 1,1 kg 3,5 m² 1,40

11

RAUTHERMEX Heat-shrink End Cap (wet environment)Suitable for protecting the foamed pipe ends against moisture, comprising shrinkable PE-X coated with adhesive.

RAUTHERMEX Slip on End Cap (dry environment)Suitable for covering the foamed pipe ends in dry rooms, made of PE-LD. UNO

Pipe Heat Shrink End Cap Slip on End CapArticle Nr� Marticle Nr�

25/91 209961-001 242544-001 32/91 209961-001 246989-001 40/91 209961-001 242584-001 50/111 209961-001 242604-001 63/126 209962-001 242624-001 75/162 209963-001 242654-001 90/162 209963-001 242664-001110/162 209963-001 242674-001125/182 209963-001 288374-001140/202 209963-001160/250 298821-001

DUO

Pipe Heat Shrink End Cap Slip on End CapArticle Nr� Article Nr�

25 + 25/111 209964-001 240313-00132 + 32/111 209966-001 242724-00140 + 40/126 209966-001 242754-00150 + 50/162 209967-001 242784-00163 + 63/182 209968-001 239091-001

Wet end cap Dry end cap

12

RAUTHERMEX rubber end capsSuitable for the protection of foamed pipe ends from moisture.Made from EPDM.

UNO

Pipe Rubber end capArticle Nr�

25/91 216397-00132/91 216397-00132/111 216398-00140/91 216397-00140/126 218179-001*50/111 216398-00150/126 218179-001*63/126 218179-001*75/162 218185-001*90/162 218185-001*90/182 218186-001*110/162 218185-001*110/182 218186-001*110/202 218187-001*125/182 218186-001*140/202 218187-001*160/250 218188-001** Available from Q3 2014

DUO

Pipe Rubber end capArticle Nr�

25+25/111 216399-00132+32/111 216399-00132+32/126 218189-001*40+40/126 218189-001*50+50/162 218191-001*50+50/182 218192-001*63+63/182 218192-001** Available from Q3 2014

13

14

4 RAUVITHERM PRE-INSULATED PIPE, SDR 11

RAUVITHERM for Heating and Hot Water Applications(Outer jacket dark grey) Suitable up to max. 95°C and 6 bar, comprising:- carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN 4726- Insulation made of cross-linked PE foam plates and with DUO pipes, an additional white PE foam section is added- Grey, corrugated extruded outer jacket, made of polyehylene.

Delivery in coils.

RAUVITHERM UNO Pipe

Article Nr� Type d s D [kg/m] max� coil length [m]2�8 x 0�8m

max� coil length [m] 2�8 x 1�2m

132053-001 25/120 25 2,3 113 0,98 207 290132063-001 32/120 32 2,9 114 1,07 207 290132073-001 40/120 40 3,7 116 1,22 207 290132083-001 50/150 50 4,6 144 1,75 138 230132093-001 63/150 63 5,8 145 2,08 138 230132103-001 75/175 75 6,8 170 2,99 95 130132113-001 90/175 90 8,2 175 3,64 95 130132123-001 110/190* 110 10,0 187 4,60 87 100132133-001 125/210* 125 11,4 209 6,10 59 80* From d > = 110 mm – carrier pipe, use lubricant for compression sleeve

RAUVITHERM DUO Pipe

Article Nr� Type d s D [kg/m] max� coil length [m]2�8 x 0�8m

max� coil length [m]2�8 x 1�2m

132003-001 25 + 25/150 25 2,3 144 1,66 138 230132013-001 32 + 32/150 32 2,9 146 1,87 138 230132023-001 40 + 40/150 40 3,7 148 2,24 138 175132033-001 50 + 50/175 50 4,6 177 3,31 95 130132043-001 63 + 63/210 63 5,8 208 4,77 59 90

D

d

SS

d

D

15

5 RAUVITHERM SCREW FITTINGS

REHAU Screw Fittings

For screw connection of RAUVITHERM carrier pipes in an above-ground and accessible places.

Material: Brass Article Nr� Description Thread [kg/piece]310681-001 Screw Fitting 25 x 2,3 ¾“ 0,166287083-001 Screw Fitting 32 x 2,9 1“ 0,350131277-001 Screw Fitting 40 x 3,6 1¼“ 0,423355534-001 Screw Fitting 50 x 4,6 1½“ 0,920355545-001 Screw Fitting 63 x 5,8 2“ 1,200

16

6 RAUVITHERM SHROUD KITS

RAUVITHERM T-Shroud Setfor tee connectionsComplete kit includes:- Shroud, made of PE- Heat shrink sleeves- Ventilation plugs- GRP polymer screws - Sealing tape- Installation instructions

To fit the respective RAUVITHERM pipe outer jacket diameter to the T-shroud, please use the stepped end sections . For the insulation, use RAUVITHERM

foam sets.

Article Nr� T-Shroud Outer Jacket Diameter L H [kg/piece]

1 2 3 [mm] [mm]354526-002 Small 120 - 150 120 - 150 120 - 150 650 490 4,5352508-002 Large 120 - 210 120 - 210 120 - 210 790 644 5,6

RAUVITHERM I-Shroud Setfor straight connections

Complete kit includes:- Shroud, made of PE- Heat shrink sleeves- Ventilation plugs- Installation instructions

To fit the respective RAUVITHERM pipe outer jacket diameter to the I-shroud, please use the stepped end sections . For the insulation, use RAUVITHERM

foam sets.

Article Nr� I-Shroud Outer Jacket Diameter L [kg/piece]

1 2 [mm]354527-002 Small 120 - 150 120 - 150 650 4,0352507-002 Large 120 - 210 120 - 210 670 4,5

RAUVITHERM L-Shroud Setfor elbow connections

Complete kit includes:- Shroud, made of PE- Heat shrink sleeves- Ventilation plugs- Polymer screws- Installation instructions

To fit the respective RAUVITHERM pipe outer jacket diameter to the L-shroud, please use the stepped end sections . For the insulation, use RAUVITHERM

foam sets. Article Nr� I-Shroud Outer Jacket Diameter L [kg/piece]

1 2 [mm]303928-001 Small 120 - 150 120 - 150 502 2,5303927-001 Large 120 - 210 120 - 210 590 6,0

17

RAUVITHERM Shrink Collar

For repairing RAUVITHERM T-Shrouds, I-Shrouds and L-Shrouds.

Article Nr� Piece/Unit [kg/piece]353353-001 1 0,70

RAUVITHERM Repair Kits

Material Nr� Description Length [mm] [kg/Piece]297991-033 REHAU RAUVITHERM Repair kits for small shrouds 330 0,10297992-040 REHAU RAUVITHERM Repair kits for large shrouds 400 0,30

REHAU PU Foamfor insulating- RAUVITHERM T-Shrouds, I-Shrouds & L-Shrouds

Comprising of:- Foam bottle component A- Foam bottle component B- Measuring cap- Instruction Manual

Please contact your local REHAU Sales Office for safety instructions.

Article Nr� for Size [kg/piece]201273-001 RAUVITHERM T-Shroud small 7 1,20351063-001 RAUVITHERM T-Shroud large 9.1 2,30298357-001 RAUVITHERM I-Shroud small 5 1,00352413-001 RAUVITHERM I-Shroud large 8 1,70209596-001 RAUVITHERM L-Shroud small 6 0,90304766-001 RAUVITHERM L-Shroud large 8.1 1,70

REHAU Temperature Measuring Strips

To determine the flow temperature.

Article Nr� Piece/Unit Measuring Temperature [kg/piece]237082-001 1 piece 60 °C 0,05

REHAU Abrasive Strip

For roughing of the Shroud Kits.

Article Nr� Length (m) Granulation [kg/piece]236172-001 50 P80 0,50

Drill Bit for PU Foam Canister

For drilling plug openings on couplings.

Article Nr� Diameter (mm) Support (mm) [kg/piece]231310-001 25 10 0,10

Air Bleeding Cap 26 mmFor ventilating Generation I Shrouds.

Article Nr� Content [kg/piece]222626-001 1 piece 0,01

18

7 REHAU HOUSE ENTRIES

REHAU Pre-fabricated Pipe Bend SDR 11 Suitable up to max. 95°C and 6 bar, comprising:- a bent carrier pipe made of cross-linked polyethylene (PE-Xa) as per DIN 16892/92 and an oxygen diffusion barrier as per DIN 4726.- Insulation with CFC-free, pentane-driven polyurethane foamed PU.- Black HD-PE jacket pipe- Elbow made up of segments produced by means of contact weldingPipe bend length: 1.1 m x 1,6 m.

Free laying pipe ends: 250 mm.

Pre-fabricated Pipe UNO

Article Nr� Type Carrier Pipe Outer Dia� Radius [kg/piece]d s D R

240004-001 25/91 25 2,3 91 138 2,85240064-001 32/91 32 2,9 91 141 3,07240074-001 40/91 40 3,7 111 175 3,47240084-001 50/111 50 4,6 111 200 4,92240094-001 63/126 63 5,8 126 200 6,50240054-001 75/162 75 6,8 162 240 8,47240114--001 90/162 90 8,2 184 - -240124-001 110/162 110 10,0 162 345 14,23222827-001 125/182 125 11,4 184 - 16,03

Pre-fabricated Pipe DUO

Article Nr� Type Carrier Pipe Outer Dia� Radius [kg/piece]d s D R

240194-001 25 + 25/111 2 x 25 2,3 111 138 4,71240224-001 32 + 32/111 2 x 32 2,9 111 141 4,67240234-001 40 + 40/126 2 x 40 3,7 126 175 7,42240244-001 50 + 50/162 2 x 50 4,6 162 200 9,90243788-001 63 + 63/182 2 x 63 5,8 182 200 13,20

19

Wall Penetrations for Pressured Water (with rough outer surface)Consists of PVC wall sleeve and heat shrink sleeveWatertight to 2m water column. For direct installation with expansive mortar or concreted in. Article Nr� Casing diameter for Dimension [kg/piece] Contents

[mm] UNO DUO304336-001 160 25,32,40 2,57 1 pc.304335-001 225 50,63,75,90 25,32,40,50 4,70 1 pc.304334-001 280 110,125 63 6,72 1 pc.

Wall Penetrations for Pressured Water (including compact sealing ring)Consists of PVC wall sleeve, heat shrink sleeve and compact sealing ringWatertight to 2m water column. For direct installation in a tapping drill hole. Article Nr� Casing Diameter for Dimension [kg/piece] Content

[mm] UNO DUO304333-001 250 25,32,40 5,36 1 pc.304328-001 300 50,63,75,90 25,32,40,50 7,95 1 pc.304307-001 350 110,125 63 11,32 1 pc.

REHAU Wall Sealing Ring (dry environment)Watertight up to 2m water columnSuitable as a building inlet through Masonary, in conjunction with expansive mortar for non-pressured water.It comprises of a profiled neoprene ring to fit. Article Nr� D (mm) Da (mm) For Dimension RAUVITHERM [kg/piece]

Uno Duo240373-001 111 153 25,32 0,50240383-001 126 168 40 0,50240393-001 142 183 50, 63 25, 32 0,60240403-001 162 203 75 40 0,70239101-001 182 223 90, 110 50 0,80353278-001 202 234 125 63 0,90* N.B. For RAUVITHERM, the sealing tape below (353277-001) must be ordered in conjunction.

RAUVITHERM Sealing TapeSuitable for sealing the gap between the Wall Sealing Ring and RAUVITHERM Pipe.Made from Butyl rubber

Article Nr� Length [m] Width [mm]353277-001 2 40

20

RAUVITHERM Rubber End CapsSuitable for the protection of foamed pipe ends from moisture.Made from EPDM. UNO

Article Nr� UNO Carton Content [kg/piece]320012-001 25,32,40 1 pc. 0,30320021-001 50,63 1 pc. 0,30320031-001 75,90 1 pc. 0,30320041-001 110 1 pc. 0,30322051-001 125 1 pc. 0,30

DUO

Article Nr� DUO Carton Content [kg/piece]320007-001 25,32,40 1 pc. 0,30320071-001 50 1 pc. 0,30320061-001 63 1 pc. 0,30

RAUVITHERM Heat-shrink End Cap (wet)Suitable for protecting the foamed pipe ends against moisture, comprising shrinkablePE-X coated with adhesive, including temperature measuring strips and abra-

sive strips.

UNO

Article Nr� Pipe Carton Content [kg/piece]352506-001 25/120 1 pc. 0,11352506-001 32/120 1 pc. 0,11352506-001 40/120 1 pc. 0,11352504-001 50/150 1 pc. 0,16352517-001 63/150 1 pc. 0,18352517-001 75/175 1 pc. 0,18352517-001 90/175 1 pc. 0,18352518-001 110/190 1 pc. 0,24352518-001 125/210 1 pc. 0,24

DUO

Article Nr� Pipe Carton Content [kg/piece]352509-001 25 + 25/150 1 pc. 0,22352509-001 32 + 32/150 1 pc. 0,22352509-001 40 + 40/150 1 pc. 0,22352509-001 50 + 50/175 1 pc. 0,22352514-001 63 + 63/210 1 pc. 0,22

21

8 SPECIAL ACCESSORIES

District Heating ChamberMulti-functional district heating chamber for all connections d20 – d110The chamber serves to cover and protect REHAU pipe connections, isolation valves or branches.Including stainless steel screw connections for the watertight and permanent connection of the cover and main body of the chamber.Material: PE.

Colour: Black.

Article Nr� Diameter [mm] Dimensions L x B x H [mm] Weight

[kg/piece]208558-001 800 1520 x 1520 x 415 50

Article Nr� Description [kg/piece]297991-033 Heat Shrink Sleeve (330 mm) 0,100

REHAU Pre-Insulated Y-pipe SDR 11Suitable up to max. 95°C and 6 bar, comprising:- Carrier pipes made of cross-linked polyethylene (PE-Xa) in accordance with DIN 16892/93 with an orange-coloured oxygen diffusion barrier (EVOH) in accordance with DIN 4726- Insulation with CFC-free, pentane-driven foamed PU- Black HD-PE jacket pipe- Elbow made up of segments produced by means of contact weldingTotal Length: 1.8m.

Free laying pipe ends: 250 mm.

As an adapter from two UNO pipes to one DUO pipe

Article Nr� 2 x UNO Pipe D DUO Pipe C Carrier Pipe [kg/piece]d s

240314-001 25/91 91 25 + 25/111 111 25 2,3 2,00240354-001 32/91 91 32 + 32/111 111 32 2,9 5,40240364-001 40/91 91 40 + 40/126 126 40 3,7 5,80240374-001 50/111 111 50 + 50/162 162 50 4,6 7,00239423-001 63/126 126 63 + 63/182 182 63 5,8 17,00

REHAU District Heating Pipes Warning TapeFor marking the position of RAUVITHERM pipes. It should be installed approx. 40cm above the pipes. The tape reads “Caution Caution District Heating pipes below”Colour: Yellow

Article Nr� Length [m] Width [mm]311150-001 365 150

View

F

FDUO pipe

Single pipe

Single pipe

mm

22

Article Nr� Length [m] Width [mm]311150-001 365 150

9 REHAU EVERLOCTMJOINTING TECHNOLOGY, SDR11

REHAU EVERLOCTM Compression Sleeve, SDR 11For sliding on REHAU EVERLOCTM compression sleeve fitting SDR 11 in con-junction with RAUPEX and RAUTHERM pipes SDR 11.Material:Dimension 25 - 63: CuZn39Pb3

Dimension 75 - 125: Gunmetal Rg 7

Article Nr� Dimension D h [kg/piece] Carton Content Delivery Unit139572-001 25 x 2,3 30 27 0,040 50 piece 50 piece139492-001 32 x 2,9 40 35 0,080 50 piece 50 piece138683-001 40 x 3,7 49 37 0,131 25 piece 25 piece138693-001 50 x 4,6 61 44 0,260 25 piece 25 piece138703-001 63 x 5,8 74 53 0,390 25 piece 25 piece267671-001 75 x 6,8 90 53 0,500 1 piece 1 piece267681-001 90 x 8,2 108 53 0,520 1 piece 1 piece267691-001* 110 x 10,0 130 53 1,090 1 piece 1 piece235229-001* 125 x 11,4 145 53 1,597 1 piece 1 piece206256-001* 140 x 12,7 145 53 1,800 1 piece 1 piece234324-001* 160 x 14,6 185 53 2,450 1 piece 1 piece* From d > = 110 mm – Carrier pipe, use lubricant for compression sleeve

REHAU Straight Coupler, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU compression sleeves SDR 11.Material:Dimension 25 - 63: Brass

Dimension 75 - 125: Gunmetal Rg 7

Article Nr� Dimension a z [kg/piece] Carton Content Delivery Unit169010-001 25 x 2,3 67 24 0,093 50 piece 10 piece169013-001 32 x 2,9 80 26 0,180 30 piece 3 piece169015-001 40 x 3,7 90 28 0,380 25 piece 5 piece169144-001 50 x 4,6 104 28 0,570 1 piece 1 piece169142-001 63 x 5,8 122 35 0,940 1 piece 1 piece267611-001 75 x 6,8 132 32 1,480 1 piece 1 piece267621-001 90 x 8,2 132 32 2,400 1 piece 1 piece267631-001* 110 x 10,0 132 32 3,120 1 piece 1 piece235219-001* 125 x 11,4 133 32 4,500 1 piece 1 piece206257-001* 140 x 12,7 133 33 5,500 1 piece 1 piece234334-001* 160 x 14,6 143 43 5,500 1 piece 1 piece* From d > = 110 mm – Carrier pipe, use lubricant for compression sleeve

z

a

23

REHAU Reducing Coupler, SDR 11REHAU compression fitting with moulded support ridges for use withRAUPEX and RAUTHERM pipes SDR 11 and REHAU compression sleeves SDR 11.Material: Dimension 25 - 63: Brass

Dimension 75 - 110: Gunmetal Rg 7

Article Nr� Dimension a z [kg/piece] Carton Content Delivery Unit169014-001 32 x 2,9 - 25 x 2,3 74 25 0,140 30 piece 3 piece169017-001 40 x 3,7 - 32 x 2,9 83 28 0,280 25 piece 5 piece169147-001 50 x 4,6 - 40 x 3,7 99 28 0,480 1 piece 1 piece169148-001 63 x 5,8 - 50 x 4,6 117 32 0,760 1 piece 1 piece267641-001 75 x 6,8 - 63 x 5,8 132 32 1,400 1 piece 1 piece267651-001 90 x 8,2 - 75 x 6,8 137 36 1,700 1 piece 1 piece267661-001* 110 x 10,0 - 90 x 8,2 137 36 3,100 1 piece 1 piece* From d > = 110 mm – Carrier pipe, use lubricant for compression sleeves

24

REHAU T-Piece, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11Material:Dimension 25 - 63: Brass

Dimension 75 - 110: Gunmetal (Rg) 5

Article Nr� Dimension a b c z1 z2 z3 [kg/piece] Carton Delivery

Content UnitEQUAL TEE

169056-001 25 x 2,3 50 54 50 29 32 29 0,200 50 piece 10 piece169063-001 32 x 2,9 59 64 59 32 37 32 0,400 30 piece 3 piece169072-001 40 x 3,7 67 77 67 43 53 43 0,770 25 piece 1 piece169156-001 50 x 4,6 88 87 88 49 48 49 0,870 25 piece 1 piece169167-001 63 x 5,8 105 108 105 59 62 59 2,350 25 piece 1 piece221946-001 75 x 6,8 117 117 117 67 67 67 2,700 1 piece 1 piece221948-001 90 x 8,2 126 126 126 76 76 76 4,000 1 piece 1 piece221953-001 110 x 10,0 137 137 137 87 87 87 6,000 1 piece 1 piece TEE ON END AND BRANCH REDUCED 1 - 2 - 3169060-001 32 - 25 - 25 56 58 50 29 36 29 0,280 30 piece 3 piece169070-001 40 - 32 - 32 69 67 63 37 40 36 0,580 1 piece 1 piece169151-001 50 - 25 - 40 82 69 74 43 47 42 0,820 1 piece 1 piece169153-001 50 - 32 - 40 72 75 73 33 48 41 0,720 1 piece 1 piece169160-001 63 - 32 - 50 98 82 88 52 53 49 1,200 1 piece 1 piece169162-001 63 - 40 - 40 98 87 81 52 55 49 1,500 1 piece 1 piece169163-001 63 - 40 - 50 97 87 89 51 55 50 1,600 1 piece 1 piece169165-001 63 - 50 - 50 97 94 89 51 55 50 1,600 1 piece 1 piece221935-001 75 - 32 - 63 92 89 88 42 59 38 2,100 1 piece 1 piece221938-001 75 - 50 - 63 102 102 98 52 61 48 2,400 1 piece 1 piece221943-001 75 - 63 - 63 109 113 105 59 62 55 2,500 1 piece 1 piece TEE BRANCH REDUCED 1 - 2 - 3169061-001 32 - 25 - 32 57 58 57 30 36 30 0,325 30 piece 3 piece169069-001 40 - 25 - 40 67 66 67 43 44 43 0,670 1 piece 1 piece169071-001 40 - 32 - 40 67 72 67 43 45 43 0,700 1 piece 1 piece169152-001 50 - 25 - 50 73 69 73 34 47 34 0,830 1 piece 1 piece169154-001 50 - 32 - 50 72 75 80 33 48 41 0,820 1 piece 1 piece169155-001 50 - 40 - 50 81 80 81 42 48 42 0,900 1 piece 1 piece169159-001 63 - 25 - 63 83 79 83 37 57 37 1,200 1 piece 1 piece169161-001 63 - 32 - 63 87 85 87 41 58 41 1,200 1 piece 1 piece169164-001 63 - 40 - 63 92 90 92 46 58 46 1,700 1 piece 1 piece169165-001 63 - 50 - 63 98 97 98 52 58 52 1,900 1 piece 1 piece221934-001 75 - 25 - 75 87 83 87 37 57 37 2,100 1 piece 1 piece267791-001 75 - 32 - 75 92 89 92 42 58 42 2,100 1 piece 1 piece221936-001 75 - 40 - 75 96 104 96 46 70 46 2,250 1 piece 1 piece231326-001 75 - 50 - 75 102 101 102 52 60 52 2,500 1 piece 1 piece221944-001 75 - 63 - 75 109 113 109 59 63 59 2,500 1 piece 1 piece231336-001 90 - 32 - 90 92 98 92 42 67 42 3,000 1 piece 1 piece221945-001 90 - 40 - 90 96 104 96 46 70 46 3,200 1 piece 1 piece231346-001 90 - 63 - 90 109 121 109 59 71 59 3,800 1 piece 1 piece231356-001 110 - 32 - 110 92 109 92 42 48 42 4,300 1 piece 1 piece221950-001 110 - 50 - 110 102 122 102 52 81 52 5,300 1 piece 1 piece231366-001 110 - 63 - 110 109 132 109 59 82 59 5,400 1 piece 1 piece TEE BOTH ENDS REDUCED 1 - 2 - 3267781-001 63 - 75 - 63 113 109 113 63 59 63 1,690 1 piece 1 piece TEE ONE END REDUCED 1 - 2 - 3169062-001 32 - 32 - 25 59 64 53 32 37 32 0,350 30 piece 3 piece

b

z2

a

z3z1

c

25

REHAU T-Piece, Pre-insulated incl� Compression SleevesSteel T-piece with welded-on compression sleeve adapter for use withRAUVITHERM pipes SDR 11 including REHAU EVERLOCTM compression slee-ves.Material:T-Piece: Steel St 37Compression Sleeve:Dimension 25 - 63: CuZn39Pb3

Dimension 75 - 160: Gunmetal Rg 7

Article Nr� d1 (mm) d2 (mm) d3 (mm) [kg/piece]222684-001 40 25 32 1,500222704-001 50 40 40 2,000222714-001 63 25 50 2,500241194-001 75 25 63 2,530241214-001 75 40 63 2,820241304-001 90 25 75 3,840241314-001 90 32 75 4,050241324-001 90 40 75 4,230241334-001 90 50 75 4,570241344-001 90 63 75 5,090241354-001 90 75 75 4,470241434-001* 110 25 90 5,000241444-001* 110 32 90 5,250241454-001* 110 40 90 5,430241464-001* 110 50 90 5,770241474-001* 110 63 90 5,770241484-001* 110 75 90 6,290241494-001* 110 90 90 7,000352898-001* 125 125 125 14,000352899-001* 125 110 125 12,500352897-001* 125 90 125 11,500352896-001* 125 75 125 11,100301895-001* 125 63 125 11,000301896-001* 125 50 125 10,000304004-001* 125 40 125 10,500301905-001* 125 32 125 10,100301906-001* 125 25 125 10,000241364-001 90 25 90 4,550241394-001 90 50 90 5,280241414-001 90 75 90 6,510241504-001* 110 25 110 5,530241524-001* 110 40 110 6,260241554-001* 110 75 110 6,780241564-001* 110 90 110 7,490301897-001* 125 125 110 13,000301888-001* 125 110 110 11,500301889-001* 125 90 110 10,500310306-001* 125 75 110 10,000310307-001* 125 63 110 10,000310308-001* 125 50 110 9,500310316-001* 125 40 110 9,500310317-001* 125 32 110 9,000310318-001* 125 25 110 9,000More T-pieces available on request.* From d > = 110 mm – Carrier pipe, use lubricant for compression sleeve

26

REHAU T-Piece (steel), pre-insulatedPre-insulated Tee made of steel including connectors with compressionsleevesStraight branch (125mm), 45

o angled branch (160mm)

Material:T-piece: Steel St 37Compression Sleeve:Dimension 25 - 63: CuZn39Pb3Dimension 75 - 160: Gunmetal Rg 7Insulation: CFC free PU foamOuter Jacket: Polyethylene (PE-HD) Article Nr� d1 (mm) d2 (mm) d3 (mm) [kg/piece]201411-001* 125 125 125 27201413-001 160 160 160 50* requires shroud I 182/200

REHAU T-Piece, Branch with Female Thread, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11.Material:

Brass

Article Nr� Dimension a b c z1 z3 [kg/piece] Carton Content Delivery Unit

FEMALE THREAD169057-001 25 - Rp ½“ - 25 56 25 56 35 35 0,215 50 piece 10 piece169058-001 25 - Rp ¾“ - 25 56 28 56 35 35 0,225 50 piece 10 piece169064-001 32 - Rp ½“ - 32 67 30 67 40 40 0,320 30 piece 3 piece169067-001 32 - Rp ¾“ - 32 67 36 67 40 40 0,345 1 piece 1 piece169065-001 32 - Rp 1“ - 32 67 30 67 40 40 0,420 1 piece 1 piece169073-001 40 - Rp ½“ - 40 63 40 63 31 31 0,560 1 piece 1 piece169076-001 40 - Rp ¾“ - 40 67 41 67 35 35 0,613 1 piece 1 piece169075-001 40 - Rp 1“ - 40 72 37 75 40 42 0,700 1 piece 1 piece169079-001 50 - Rp ½“ - 50 70 45 70 22 22 0,890 1 piece 1 piece169080-001 50 - Rp ¾“ - 50 74 46 74 35 35 1,020 1 piece 1 piece169158-001 50 - Rp 1“ - 50 85 43 87 46 48 0,930 1 piece 1 piece169078-001 50 - Rp 1 ¼“ - 50 85 45 87 46 48 0,970 1 piece 1 piece169082-001 63 - Rp ½“ - 63 82 55 82 36 36 1,100 1 piece 1 piece169083-001 63 - Rp ¾“ - 63 85 56 85 39 39 1,270 1 piece 1 piece TEE FEMALE BRANCH REDUCED END169074-001 40 - Rp 1“ - 32 72 37 79 40 43 0,160 1 piece 1 piece169157-001 50 - Rp 1 ¼“ - 40 85 43 80 46 46 0,890 1 piece 1 piece

27

REHAU Elbow 45 °, SDR 11REHAU EVERLOCTM compression sleeve with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11.Material:Dimension 20 - 63: Brass

Dimension 75: Gunmetal Rg 5

Article Nr� Dimension a z [kg/piece] Carton Content Delivery Unit169125-001 25 x 2,3 46 20 0,137 50 piece 10 piece169127-001 32 x 2,9 54 27 0,259 30 piece 3 piece169129-001 40 x 3,7 58 27 0,457 1 piece 1 piece169131-001 50 x 4,6 67 28 0,700 1 piece 1 piece169150-001 63 x 5,8 81 35 1,280 1 piece 1 piece237836-001 75 x 6,8 85 35 1,720 1 piece 1 piece

REHAU Elbow 90 °, SDR 11REHAU EVERLOCTM compression sleeve with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11.Material:Dimension 20 - 63: Brass

Dimension 75 - 110: Gunmetal Rg 5

Article Nr� Dimension a z [kg/piece] Carton Content Delivery Unit169126-001 25 x 2,3 54 32 0,160 50 piece 10 piece169128-001 32 x 2,9 64 37 0,290 30 piece 3 piece169130-001 40 x 3,7 74 42 0,520 1 piece 1 piece169145-001 50 x 4,6 87 48 0,820 1 piece 1 piece169146-001 63 x 5,8 106 60 1,500 1 piece 1 piece267751-001 75 x 6,8 117 67 2,440 1 piece 1 piece267761-001 90 x 8,2 127 76 3,150 1 piece 1 piece267771-001 110 x 10,0 137 87 5,010 1 piece 1 piece

REHAU Male Adapter with Male Thread, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11.

Material: Brass

Article Nr� Dimension a z SW [kg/piece] Carton Content Delivery Unit169105-001 25 x 2,3 - R ¾“ 63 42 31 0,125 50 piece 10 piece169104-001 25 x 2,3 - R 1“/L22 63 41 35 0,160 50 piece 10 piece169109-001 32 x 2,9 - R 1“/L22 69 42 40 0,240 30 piece 3 piece169111-001 40 x 3,7 - R 1 ¼“ 82 50 36 0,350 25 piece 5 piece169149-001 50 x 4,6 - R 1 ¼“ 89 50 41 0,480 1 piece 1 piece169143-001 50 x 4,6 - R 1 ½“ 89 50 41 0,510 1 piece 1 piece169141-001 63 x 5,8 - R 2“ 105 59 55 0,800 1 piece 1 piece267581-001 75 x 6,8 - R 2 ½“ 110 60 73 1,660 1 piece 1 piece267591-001 90 x 8,2 - R 3“ 111 60 90 2,110 1 piece 1 piece267601-001 110 x 10,0 - R 4“ 119 60 110 3,900 1 piece 1 piece235239-001 125 x 11,4 - R 5“ 116 66 120 5,200 1 piece 1 piece

za

z a

45°

a

z

z

a

z

a

28

REHAU Female Adapter with Female Thread, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes SDR 11 and REHAU EVERLOCTM com-pression sleeves SDR 11.

Material: Brass

Article Nr� Dimension a z SW [kg/piece] Carton Content Delivery Unit169107-001 25 x 2,3 - Rp ¾“ 61 19 34 0,160 50 piece 10 piece169106-001 25 x 2,3 - Rp 1“ 66 21 40 0,200 50 piece 10 piece169110-001 32 x 2,9 - Rp 1“ 69 20 40 0,210 30 piece 3 piece

REHAU Adapter with Welding End, SDR 11*REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUPEX and RAUTHERM pipes and REHAU EVERLOCTM compression sleeves SDR 11.Only suitabe for heating applications

Material: Steel 1.0038(St.37)

Article Nr� Dimension a b c z [kg/piece] Carton Content Delivery Unit267161-001 25 x 2,3 - 26,9 x 2,3 50 20 26,9 30 0,070 50 piece 10 piece267181-001 32 x 2,9 - 33,7 x 2,6 60 24 33,7 34 0,130 30 piece 3 piece267201-001 40 x 3,7 - 42,4 x 2,6 70 29 42,4 37 0,270 3 piece 3 piece267221-001 50 x 4,6 - 48,3 x 2,6 85 37 48,3 47 0,410 3 piece 1 piece267241-001 63 x 5,8 - 60,3 x 2,9 90 32 60,3 45 0,550 3 piece 1 piece267261-001 75 x 6,8 - 76,1 x 2,9 95 35 76,1 45 0,840 3 piece 1 piece267281-001 90 x 8,2 - 88,9 x 3,2 95 35 88,9 45 1,150 3 piece 1 piece267301-001 110 x 10,0 - 114,3 x 3,6 90 30 114,3 40 1,550 3 piece 1 piece235209-001 125 x 11,4 - 139,7 x 3,6 108 48 139,7 59 3,500 1 piece 1 piece206253-001 140 x 12,7 - 139,7 x 3,6 4,500 1 piece 1 piece231626-001 160 x 14,6 - 168,3 x 4,1 114 50 168,3 64 6,000 1 piece 1 piece

* PN16 Flanges are available for these welding end adapters.

a

z

c

z

ba

29

REHAU Ball Valve with Compression Sleeve Connection, SDR 11REHAU ball valve with hand lever, with moulded ridged pipes on bothsides in conjunction with RAUPEX and RAUTHERM pipes SDR 11 andcompression sleeves SDR 11Material:Body: Brass Seals: PTFEBall: Chrome-plated brass

Hand lever: Galvanised steel, plastic-coated

Article Nr� Dimension A H L S [kg/piece] Carton Content Delivery Unit233163-001 25 x 2,3 - 25 x 2,3 104 54 92 26 0,344 1 piece 1 piece233183-001 32 x 2,9 - 32 x 2,9 128 58 92 31 0,553 1 piece 1 piece233213-001 40 x 3,7 - 40 x 3,7 148 66 127 34 0,998 1 piece 1 piece233233-001 50 x 4,6 - 50 x 4,6 173 72 127 41 1,597 1 piece 1 piece233253-001 63 x 5,8 - 63 x 5,8 204 82 142 50 2,815 1 piece 1 piece

REHAU Ball Valve with Compression Sleeve Connection andMale Thread, SDR 11REHAU ball valve with hand lever, with a moulded support ridges on one sideand male thread on the other, for connecting to RAUPEX and RAUTHERMpipes SDR 11 and compression sleeves SDR 11.Material:Body: Brass Seals: PTFEBall: Chrome-plated brass

Hand lever: Galvanised steel, plastic-coated

Article Nr� Dimension A H L S G [kg/piece] Carton Content Delivery Unit233173-001 25 x 2,3 - R 1“ 98 58 92 26 20 0,393 1 piece 1 piece233193-001 32 x 2,9 - R 1“ 104 58 92 31 20 0,466 1 piece 1 piece

30

REHAU Isolation Valves with Compression Sleeves SDR 11REHAU isolation valve, pre-insulated. Pipe outer jacket made of HD-PE, black colour, with 6kt connection for spindle extending, along with 6kt key plus compression sleeve adapter, including compression sleeves for connection of RAUPEX and RAUTHERM SDR 11 pipes.Material:Shut off valve: Steel St 37Insulation: PU- foamBall Valves: chrome plated brass

NB. reducing sockets will be required

UNO Pipe

Article Nr� Description [kg/piece] Carton Content Delivery Unit353285-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 25 6,250 1 1352926-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 32 8,000 1 1352927-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 40 9,300 1 1352937-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 50 11,200 1 1352928-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 63 13,000 1 1352919-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 75 17,300 1 1352924-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 90 21,500 1 1352975-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 110 33,000 1 1352923-001 Isolation valves with connecting compression sleeves at both sides for RVT UNO 125 46,000 1 1

DUO Pipe

Article Nr� Description [kg/piece] Carton Content Delivery Unit353295-001 Isolation valves with connecting compression sleeves at both sides for RVT DUO 25 14,000 1 1353305-001 Isolation valves with connecting compression sleeves at both sides for RVT DUO 32 15,000 1 1353315-001 Isolation valves with connecting compression sleeves at both sides for RVT DUO 40 17,000 1 1353325-001 Isolation valves with connecting compression sleeves at both sides for RVT DUO 50 21,000 1 1353335-001 Isolation valves with connecting compression sleeves at both sides for RVT DUO 63 24,000 1 1

31

REHAU Renewable Energy Solutions

Our verbal and written application engineering advice is based upon experience and the best of our knowledge. However it is to be regarded as non-binding information. Working conditions and use under these conditions for which the product was not intended and over which we have no influence exclude any claim resulting from our information. We recommend that a suitable check is made as to whther the REHAU product is suitable for the envisaged purpose. Application, use and processing of the products is carried out beyond the scope of our control and are therefore carried out exclusively at your own responsibility. If liability should still apply, then this is restricted, in the case of all damage, the value of the goods supplied by us and used by you.Our warranty applies to the consistent quality of our products as per our specification and in accordance with our general terms and conditions of delivery and payment. This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored on a data retrieval system.

Follow REHAU Renewables

UK & IRELAND SALES OFFICES

London, REHAU Ltd, The Building Centre, 25 Store Street, London WC1E 7BT Slough, Units 5 J & K, Langley Business Centre, Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400 Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix Cres-cent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: 01698 503700 Fax: 01698 503701 Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

www.rehau.uk/districtheating 817302 EN 04.2014