Embed Size (px)
Citation preview
The travel unit uses a dovetail (D-T method) for the travel guide.
A rack & pinion is used for the feed method, achieving large travel amounts.
Versatile use for positioning of cameras, sensors, etc.
A lever type clamp enables fixing in a desired position with strong retention force.
Low bracket products with a short Z bracket are available.
‐ TLT-412 ‐ TLT-412WS‐ TLT-412S‐ TLT-412W
Rack & Pinion - XYZ Stages 40 x 40D-T Method
Features
Mechanical Stage Systems
▶Manual Stages Rack & Pinion Stages
Fix Stages
Thin VB
Stages
Rack &
Pinion
Stages
High-G
rade S
tages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
177
■ Low bracket
Model number TLT-412L TLT-412WL TLT-412SL TLT-412WSL
Model name DT XYZ Stage 40 x 40DT XYZ Stage 40 x 40
(Double Knob)DT XYZ Stage 40 x 40
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 40
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 40 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount XY axes ±10 mm, Z axis 10 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 0.64 kg 0.72 kg 0.85 kg 1.02 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
■ Regular bracket
Model number TLT-412 TLT-412W TLT-412S TLT-412WS
Model name DT XYZ Stage 40 x 40DT XYZ Stage 40 x 40
(Double Knob)DT XYZ Stage 40 x 40
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 40
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 40 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount ±10 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 0.67 kg 0.74 kg 0.88 kg 1.04 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
6-M4 depth 8
40
5060
57
128
M6 depth 8
60
Clamp lever
3.5
830
30
5060
Clamp lever12.5
4012.5
4-4.5 drilled 7.5 deep counterbore
Clamp lever
108
57
46.7
φ28
φ28
16.7
φ28
18.740
4012.512.5
‐ TLT-412
11446
.7
φ2830
108 12
8
1143.5
84-4.5 drilled 7.5 deep counterbore
6-M4 depth 8M6 depth 8
60
Clamp lever30
Clamp lever12.5
4012.5
φ28
φ28
40
6050
5060
16.7
40
Clamp lever
4018.7
12.512.5
‐ TLT-412W
128
108
φ40
73.5
603.
5
Clamp lever
308
3060 50
40Clamp lever6-M4 depth 8M6 depth 8
12.512.5
4-4.5 drilled 7.5 deep counterbore
6050
Clamp lever
73.5
47.5φ
30
φ30
17.5
φ30
19.540
40
φ30
12.512.5
‐ TLT-412S
47.5φ
30
1473.5
128
108
830
φ30
60
6-M4 depth 8
60
Clamp lever
30
Clamp leverM6 depth 840
12.512.5
φ30
φ40
6050
4-4.5 drilled 7.5 deep counterbore
50
147
17.5
40
Clamp lever
4019.5
12.512.5
‐ TLT-412WS
Product Appearance
50φ
28φ
2888 10
8
40
Clamp lever
3.5
830
30
57
φ28
60 50
4-4.5 drilled 7.5 deep counterbore
Clamp lever M6 depth 86-M4 depth 812.512.5
40
57
6050
57
46.7φ
28
704018.7
Clamp lever
16.7
12.512.5
‐ TLT-412L.
108
88φ
30
40
73.5
3.5
8
Clamp lever
3030
φ30
50
60
73.5
40
M6 depth 86-M4 depth 8Clamp lever
12.512.5
4-4.5 drilled 7.5 deep counterbore
5060
50
70
40
73.5
47.5φ
30
4019.5
Clamp lever
17.5
12.512.5
‐ TLT-412SL
5088 10
8
30
114
Clamp lever
3.5
308 φ
28φ
28
Clamp lever
40
M6 depth 8406-M4 depth 812.5 12.5
φ28
57
φ28
114
46.7
16.7
7040
40
18.7
Clamp lever
4-4. 5 drilled 7. 5 deep counterbore
5060
5060
12.5
12.5
‐ TLT-412WL
108Clamp lever
88
30
147
3.5
830
φ30
50
40
40
Clamp leverM6 depth 8
6-M4 depth 812.512.5
φ30
73.5
φ30
147
47. 5
704019.5
40
17.5
Clamp lever
506050
604-4. 5 drilled 7. 5 deep counterbore
12.5
12.5
‐ TLT-412WSL
Mechanical Stage Systems
Rack & Pinion Stages Manual Stages◀
Fix Stages
Thin VB
S
tagesR
ack & P
inion S
tagesH
igh-Grade
Stages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
178
‐ TLT-612 ‐ TLT-612WS‐ TLT-612S‐ TLT-612W
Rack & Pinion - XYZ Stages 40 x 60D-T Method
The travel unit uses a dovetail (D-T method) for the travel guide.
A rack & pinion is used for the feed method, achieving large travel amounts.
Versatile use for positioning of cameras, sensors, etc.
A lever type clamp enables fixing in a desired position with strong retention force.
Low bracket products with a short Z bracket are available.
Features
Mechanical Stage Systems
▶Manual Stages Rack & Pinion Stages
Fix Stages
Thin VB
Stages
Rack &
Pinion
Stages
High-G
rade S
tages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
179
■ Low bracket
Model number TLT-612L TLT-612WL TLT-612SL TLT-612WSL
Model name DT XYZ Stage 40 x 60DT XYZ Stage 40 x 60
(Double Knob)DT XYZ Stage 40 x 60
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 60
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 60 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount XY axes ±15 mm, Z axis 15 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 0.87 kg 0.94 kg 1.08 kg 1.23 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
■ Regular bracket
Model number TLT-612 TLT-612W TLT-612S TLT-612WS
Model name DT XYZ Stage 40 x 60DT XYZ Stage 40 x 60
(Double Knob)DT XYZ Stage 40 x 60
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 60
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 60 mmClamp method Lever MethodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount ±15 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 0.9 kg 0.98 kg 1.1 kg 1.28 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
8-M4 depth 8
M6 depth 8
60
85
153
12.5 12.5
Clamp lever
3.5
830
30 123
16.7
57
46.7
57
Clamp lever
Clamp lever
5060
4-4.5 drilled 7.5 deep counterbore
40
40
5060
φ28
4018.7
12.512.512.512.5
‐ TLT-61260
11446
.7
Clamp lever
18.74085
153
123
Clamp lever308
30
114
16.7
3.5
Clamp lever5060
6050
4-4.5 drilled 7.5 deep counterbore
M6 depth 88-M4 depth 8
4012.5 12.5
40φ28
12.512.5
12.512.5
‐ TLT-612W
Clamp lever
60
85
153
Clamp lever
303.
58
30 47.5
123
73.5
17.5
17.5
73.5
Clamp lever
5060
5060
8-M4 depth 8M6 depth 8
12.512.5
40
4-4.5 drilled 7.5 deep counterbore
40φ30
19.540
12.512.512.512.5
‐ TLT-612S
M6 depth 88-M4 depth 8
60
12.512.5
85
153
308 17
.512
3
147
3.5
30
Clamp lever
47.5
73.5
φ30
Clamp lever
6050
40
5060
Clamp lever
φ28 40
4-4.5 drilled 7.5 deep counterbore
19.54012.5
12.5
12.512.5
‐ TLT-612WS
Product Appearance
M6 depth 8
60
128
φ28
60
70
83.
530
Clamp lever
30
57
46.7
98φ
28
57
φ28
16.7
Clamp lever
5060
5060
Clamp lever
4-4.5 drilled 7.5 deep counterbore
57
408-M4 depth 812.5 12.5
50φ
28
4018.7
12.512.5
12.512.5
‐ TLT-612L
Clamp lever 128
98 φ30
47.5
30
3.5
308
73.5
φ30 17
.5
M6 depth 88-M4 depth 8
73.5
40Clamp lever 12.5 12.5
60
50
4070
φ30
60
19.5
Clamp lever
4-4.5 drilled 7.5 deep counterbore
5060
5060
12.512.512.512.5
‐ TLT-612SL
Clamp lever
128
983030
8
3.5
Clamp lever
φ28
46.7
φ28
16.7
57
114
60
Clamp lever
50
60
M6 depth 840
φ28
8-M4 depth 812.5 12.540
70
18.7
5060
5060
4-4.5 drilled 7.5 deep counterbore
12.512.5
12.512.5
‐ TLT-612WL
128
98
47.5
73.5
8
3.5
3060
30
Clamp lever
73.5
φ30φ30
8-M4 depth 8M6 depth 8
12.5 12.540
60
70
Clamp lever
19.540
50
506050
604-4.5 drilled 7.5 deep counterbore
12.5
12.512.5
12.5
‐ TLT-612WSL
Mechanical Stage Systems
Rack & Pinion Stages Manual Stages◀
Fix Stages
Thin VB
S
tagesR
ack & P
inion S
tagesH
igh-Grade
Stages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
180
‐ TLT-912 ‐ TLT-912WS‐ TLT-912S‐ TLT-912W
Rack & Pinion - XYZ Stages 40 x 90D-T Method
The travel unit uses a dovetail (D-T method) for the travel guide.
A rack & pinion is used for the feed method, achieving large travel amounts.
Versatile use for positioning of cameras, sensors, etc.
A lever type clamp enables fixing in a desired position with strong retention force.
Low bracket products with a short Z bracket are available.
Features
Mechanical Stage Systems
▶Manual Stages Rack & Pinion Stages
Fix Stages
Thin VB
Stages
Rack &
Pinion
Stages
High-G
rade S
tages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
181
■ Low bracket
Model number TLT-912L TLT-912WL TLT-912SL TLT-912WSL
Model name DT XYZ Stage 40 x 90DT XYZ Stage 40 x 90
(Double Knob)DT XYZ Stage 40 x 90
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 90
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 90 mmClamp method Lever methodOperating part mounting position Single Knob Double Knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount XY axes ±30 mm, Z axis 30 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 1.17 kg 1.24 kg 1.42 kg 1.59 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
■ Regular bracket
Model number TLT-912 TLT-912W TLT-912S TLT-912WS
Model name DT XYZ Stage 40 x 90DT XYZ Stage 40 x 90
(Double Knob)DT XYZ Stage 40 x 90
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 90
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 90 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount ±30 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 1.2 kg 1.27 kg 1.44 kg 1.61 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
16.7
Clamp lever
3.5
8
57 57
3030
130
198
153
46.7
90
4012.5 12.5
Clamp lever
6090 50
M6 depth 88-M4 depth 8
4-4.5 drilled 7.5 deep counterbore
40φ28
Clamp lever
4018.7
6050
90
12.512.512.512.5
‐ TLT-912
4090 5060 φ30
Clamp lever
3.5 73.5 73.5
3030
88
130
55.5
161
17.5
206
12.512.540
Clamp lever
8-M4 depth 8M6 depth 8
4-4.5 drilled 7.5 deep counterbore
90
Clamp lever
19.540
906050
12.512.512.512.5
‐ TLT-912S
3.5
308
308
Clamp lever
130
4-4.5 drilled 7.5 deep counterbore
Clamp lever
φ30
161
φ30
206
φ30
55.5
90
12.512.5 8-M4 depth 8M6 depth 840
73.5
4019.5
17.5
Clamp lever
506090 40
6050
90
12.512.512.512.5
‐ TLT-912WS
Product Appearance
‐ TLT-912W
16.7
3.5
8
114
30
Clamp lever
3013
0
198
153
46.7
90
8-M4 depth 8
Clamp lever
4012.5 12.5
60 5090M6 depth 8
40φ28
4-4.5 drilled 7.5 deep counterbore
6090
50
114
Clamp lever
4018.7
12.512.512.512.5
90
57
3.5
8
Clamp lever
30
φ28
46.7
100
30
Clamp lever 12.512.540
123
φ28
168
φ28
M6 depth 88-M4 depth 8
6090 50
4-4.5 drilled 7.5 deep counterbore
5060
40
57
16.7
Clamp lever
4018.7
90
12.512.512.512.5
‐ TLT-912L
3.5
830
8
Clamp lever
3010
0
φ30
φ30
4-4.5 drilled 7.5 deep counterbore
Clamp lever
60 5090
12.540
12.5
73.58-M4 depth 8M6 depth 8
40
906050
17.5
φ30
55.5
176
131
90
Clamp lever
4019.5
12.512.512.512.5
‐ TLT-912SL
3.5
16.78
114 57
46.7
12.512.5
Clamp lever
3030
100
Clamp lever
φ28
123 16
8
φ28
4-4.5 drilled 7.5 deep counterbore
40
506090
50
M6 depth 88-M4 depth 8
40
Clamp lever
φ28
90
18.740
6090
12.5
12.512.5
12.5
‐ TLT-912WL
Clamp lever
3.5
308
Clamp lever
830
100
4-4.5 drilled 7.5 deep counterbore
Clamp lever 12.512.540
147
60 5090
φ30
φ30
131
55.5
φ30
176
90
8-M4 depth 8M6 depth 8
40
19.540
906050
17.5
12.512.5
12.512.5
‐ TLT-912WSL
Mechanical Stage Systems
Rack & Pinion Stages Manual Stages◀
Fix Stages
Thin VB
S
tagesR
ack & P
inion S
tagesH
igh-Grade
Stages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
182
‐ TLT-112 ‐ TLT-112WS‐ TLT-112S‐ TLT-112W
Rack & Pinion - XYZ Stages 40 x 140D-T Method
The travel unit uses a dovetail (D-T method) for the travel guide.
A rack & pinion is used for the feed method, achieving large travel amounts.
Versatile use for positioning of cameras, sensors, etc.
A lever type clamp enables fixing in a desired position with strong retention force.
Low bracket products with a short Z bracket are available.
Features
Mechanical Stage Systems
▶Manual Stages Rack & Pinion Stages
Fix Stages
Thin VB
Stages
Rack &
Pinion
Stages
High-G
rade S
tages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
183
■ Low bracket
Model number TLT-112L TLT-112WL TLT-112SL TLT-112WSL
Model name DT XYZ Stage 40 x 140DT XYZ Stage 40 x 140
(Double Knob)DT XYZ Stage 40 x 140
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 140
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 140 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount XY axes ±50 mm, Z axis 50 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 1.7 kg 1.78 kg 1.88 kg 2.05 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
■ Regular bracket
Model number TLT-112 TLT-112W TLT-112S TLT-112WS
Model name DT XYZ Stage 40 x 140DT XYZ Stage 40 x 140
(Double Knob)DT XYZ Stage 40 x 140
(Coarse/Fine Movement Knob)DT XYZ Stage 40 x 140
(Double Coarse/Fine Movement Knob)
Travel direction XYZ-axis triple directionStage surface 40 mm x 140 mmClamp method Lever methodOperating part mounting position Single knob Double knob Single coarse/fine movement knob Double coarse/fine movement knobFeed method Rack & pinion methodTravel amount ±50 mmTravel amount/1 knob rotation Approx. 18 mm Coarse movement: approx. 25.5 mm, Fine movement: approx. 3.3 mmScale Vernier reading: 0.1 mmSensitivity 0.1 mmTravel guide DovetailTravel accuracy Straightness: 0.03 mmLoad capacity 19.6 N (2 kgf)Mass 1.74 kg 1.82 kg 1.92 kg 2.09 kgMain materials/surface treatment Aluminum alloy/black satin anodized finish
57
140
573.5
Clamp lever
308
830
200
φ28
16.7
206
276
φ28
54.7
57
4-4.5 drilled 7.5 deep counterbore
Clamp leverClamp lever
5060
4012.512.5
25
5060140
M6 depth 812-M4 depth 8
φ28
140
40
Clamp lever
18.740
12.512.512.512.5
2525
‐ TLT-112114
54.7
140
Clamp lever
4-4.5 drilled 7.5 deep counterbore
5060
114
40
6050
140
140
4018.7
Clamp lever
830
308
200
1143.5
16.7
φ28
206
φ28
φ28
276
12.5
Clamp leverClamp lever
4012.5
25
M6 depth 812-M4 depth 8
12.512.512.512.5
2525
‐ TLT-112W
3030
88
200
Clamp lever
3.5 73.5 17
.5φ
3020
6φ
30
276
φ30
55.5
73.5
140
Clamp lever
50
4-4.5 drilled 7.5 deep counterbore
60
Clamp lever
73.5
4012.5
25
12.5
12-M4 depth 8M6 depth 8
6050
140
40 140
19.540
12.512.512.512.5
Clamp lever
2525
‐ TLT-112SClamp lever
830
830
3.5
200
147
206
φ30
17.5
276
φ30
140
55.5φ
30
147
Clamp lever
4-4.5 drilled 7.5 deep counterbore
60 50
M6 depth 812-M4 depth 8
12.5
14740
25
12.5
40 140
1406050
4019.5
12.512.512.512.5
2525
‐ TLT-112WS
Product Appearance
40 12-M4 depth 8
Clamp lever
303.
58
Clamp lever
308
155
12.5 12.5
2525
54.7
57
16.7φ
28φ
28
M6 depth 8
231
161
φ28
4-4.5 drilled 7.5 deep counterbore
50601406050
5740 14
040
57
140
Clamp lever
18.7
16.7
12.512.512.512.5
2525
‐ TLT-112L
83.
5
73.5
308
30
Clamp lever
155
161
φ30
φ30
φ30
231
55.5
140
12-M4 depth 8
4-4.5 drilled 7.5 deep counterbore
5060
12.540
12.5
73.5
140
5060
M6 depth 8
140
40
17.5
73.5
Clamp lever
4019.5
12.512.512.512.5
2525
2525
‐ TLT-112SL
Clamp lever
4-4.5 drilled 7.5 deep counterbore
88
3030
155
60
18.7M6 depth 812.512.5
3.5
114
Clamp lever
25
φ28
16.7
161
54.7
231
φ28
φ28
140
114
16.7
Clamp lever
12-M4 depth 8
50
40114
6050
140
40 140
40
12.512.512.512.5
2525
‐ TLT-112WL
12.5 12.5
Clamp lever
83.
530
830
155
φ30
73.5
φ30
147
231
161
φ30
55.5
140
17.5
Clamp lever
5060
4-4.5 drilled 7.5 deep counterbore
14740
140
5060
140
40
M6 depth 812-M4 depth 8
4019.5
12.512.5
12.512.5
2525
2525
‐ TLT-112WSL
Mechanical Stage Systems
Rack & Pinion Stages Manual Stages◀
Fix Stages
Thin VB
S
tagesR
ack & P
inion S
tagesH
igh-Grade
Stages
Slim
Stages,
Cross R
oller S
tages
Z Lift Stages,
Z Stages
Rotary S
tagesTilt S
tagesTilt/R
otary S
tagesXZ, Y
Z Stages
XYZ S
tagesM
otorized S
tages
Autom
ated P
roducts for M
icroscopesM
anual Stages
184
![Precision Cutting Tools Micro Precision Drills · Machine type machining centre machining centre machining centre machining centre vc [mm/min] 80 120 100 60 f [mm/rev.] 0.1 0.14 0.1](https://img.pdfslide.us/doc/110x75/5f5805941d3df734db07f3fd/precision-cutting-tools-micro-precision-drills-machine-type-machining-centre-machining.jpg)
![MM PAPER-1 PCM MM Roll No. AA€¦ · 1-AA ] [ 3 ] [ P.T.O. MM MM MM MM MM MM MM MM MM MM MM MM MM 002. Two children Ramesh (on path ARB) and Sohan (on path ASB), travel down slides](https://img.pdfslide.us/doc/110x75/5ec3c826fba71a6bb225c6e3/mm-paper-1-pcm-mm-roll-no-aa-1-aa-3-pto-mm-mm-mm-mm-mm-mm-mm-mm-mm-mm.jpg)
