r a c t s E x t 2 p a g e o f 8 - WordPress.com...for the units and the projection rule. American (3rd angle projection) European (1st angle projection) Depending from the template

© BINDE Training

NX9 – ManualDrafting

Extract

of 82 pages

© BINDE TrainingNX9-Manual Version 2 © BINDE Training -1-

NX9-Manual

K - Drafting

Drafting KTable of contents 1

K1 Start DraftingK1-1 Create DrawingK1-3 Drawing NavigatorK1-4 Drafting Ribbon Bar

K2 Drawing Sheet

K3 ViewsK3-1 Drafting PreferencesK3-3 Base ViewK3-5 View Parameters for AssembliesK3-6 Projected ViewK3-7 Detail ViewK3-9 View BreakK3-11 Drawing ViewK3-12 Exploded ViewK3-13 Hole TableK3-14 Parts ListK3-17 Image

K4 SectionsK4-1 Section ViewK4-5 Assembly SectionK4-8 Half SectionK4-9 Revolved SectionK4-10 Folded Section ViewK4-11 Unfolded Section ViewK4-13 Break out Section View

K5 Edit ViewsK5-1 Move/Copy ViewsK5-2 Align ViewsK5-3 View BoundaryK5-4 Modfy 3D-Objects in ViewK5-5 Sketch in Drawing


NX9-Manual

K - Drafting

Drafting KTable of contents 2

K6 DetailingK6-1 CenterlinesK6-4 BalloonsK6-5 Symbols (Crosshatch and others)K6-6 Weld SymbolK6-7 Surface SymbolK6-8 User Defined Symbol

K7 DimensionK7-1 Rapid DimensionK7-3 Dimension SettingsK7-4 Parameter BlocsK7-6 Cylindrical DimensionsK7-7 Angular DimensionK7-8 Baseline dimensionK7-10 Ordinate DimensionK7-12 Automatic and manual Dimension

K8 AnnotationsK8-1 Create NoteK8-4 Feature Control SymbolsK8-6 Datum Feature Symbol

K9 Track Changes

Index


NX9-Manual

Drafting Ribbon bar:

Drafting K1Ribbon bar 4

Group Home will provide access for most important commands:

Create new drawing sheet

If you use no template you'll be ask for the units and the projection rule.

American (3rd angle projection)

European (1st angle projection)

Depending from the template you will be ask for title block input.

views, sections, details

detailing sketch, bill of material,tables

usual


NX9-Manual

K3-1 Drafting Preferences

K3-3 Base View

K3-5 View parameter for assemblies

K3-6 Projected View

K3-7 Detail Views

K3-9 View Break

K3-11 2D View

K3-12 Exploded View

K3-13 Hole Table

K3-14 Parts List

K3-17 Image

Drafting K3Views

Overview


NX9-Manual

Home Group View Base Viewalternative:Menu Insert View Base

Drafting K3Views 3

By this command the first view of referenced 3D-part is determined and positioned. Each additional view will be projected from this base view. Depending on the user’s standard preferences this function can also take place automatically after invoking the first sheet.

Positioning method

view typeorient the 3D-Model

On: view will never change


NX9-Manual

K4-1 Section View

K4-5 Assembly Section

K4-8 Half Section

K4-9 Revolved Section

K4-10 Folded Section View

K4-11 Unfolded Section View

K4-13 Break-out Section View

Drafting K4Sections

Overview


NX9-ManualDrafting K4Sections 2

Example: stepped section

1. Parent view

2. first position to section optionally: MB3 Lock Alignment

3. Select: Add segment:

4. Further through points P2, P3

P1

P2

P3

Section View

5. Confirm (MB2)

6. Position of the section view

Before positioning you can adjust the section line with following functions:

Display of the section view:

+ select section view


NX9-Manual

Insert View Section

Drafting K4Sections 7

Overview of further sections:

Half Section: Part will be cut only half way

Revolved Section: Turned section view in a revolved part.

Folded Section

Break-out Section

Unfolded Point to Point Section

Unfolded Point and Angle Section


NX9-ManualDrafting K5Edit views

K5-1 Move/Copy views

K5-2 Align views

K5-3 View Boundary

K5-4 Modify 3D-Elements in view

K5-5 Sketch in drawing

Übersicht


NX9-Manual

Home Group: View Move/Copy Viewalternative:Edit View Move/Copy View

Drafting K5Move/Copy views 1

Move/copy views in defined direction.Normally this can be done directly by mouse.

directions to move

copy yes/noname of the new viewdistance between the views


NX9-Manual

K6-1 Center lines

K6-4 Balloon

K6-6 Welding Symbol

K6-7 Surface Symbol

K6-8 Custom Symbol

Drafting K6Detailing

Overview


NX9-Manual

Home Group: Annotations Centerlinesalternative:Menu Insert Centerline

Drafting K6Centerlines1

Center Mark

Optionally: display as center point(also via MB3)

Dependent on the preferences the centerlines will be created automatically.

Note:Centerline Handlesto modify the lines

Different overhangs:: Cursor on center point MB3 specify extension individually

Diagonal centerlinessee settings angle

Drafting Preferences


NX9-Manual

K7-1 Rapid

K7-3 Settings

K7-4 Parameter blocs

K7-6 Cylindrical

K7-7 Angular

K7-8 Baseline

K7-9 Ordinate

K7-11 automatic./manual Dimension

Drafting K7Dimension

Overview


NX9-Manual

Dimension

Drafting K7Dimension 1

Home Group: Dimension Rapidalternative:Menu Insert Dimension Rapid

The most used function is Rapid Dimension. With method "inferred" the function will provide the right dimension due to the selected element.

Note:"Snap points" in the selection bar

Define the snap function. Which points should be selected!

e.g. cylindrical with diameter symbol

only sketch dimensions


NX9-Manual

Ordinate

Drafting K7Ordinate Dimension 10

one/twodirections

Add a missing dimension:

1. Select ordinate origin2. Activate the function "ordinate"3. Select new element + position dimension4. Close


NX9-Manual

K8-1 Create a Note

K8-4 Feature Control Frame

K8-6 Datum Feature Symbol

K9-1 Track Changes

Drafting K8Annotations

Overview


NX9-ManualDrafting K8

Create a Note 1

Workflow:

1. Insert text2. Text position a) direct position (without leader) or b) Drag from an edge (with leader)

Note Alignment:

Associative = always related e.g. to viewNon -associative= align only while creation afterwards no relationsOff= no relation

Home Group: Annotations Notealternative:Menu Insert Annotation Note


NX9-ManualDrafting

Index

Documents

r a c t s E x t 2 p a g e o f 8 - WordPress.com...for the units and the projection rule. American (3rd angle projection) European (1st angle projection) Depending from the template