Sheet1Sr.NoDescription Of ItemRateUnitQty.AmountJagraj
RatesJagraj AmountPercentage Increased
1Item No. 38 : - Providing & laying in situ PCCM-25 (Using
Batching4,394.25Cum.340.421495890.596111.712080548.156500528.10plant,
transit mixer and concrete pump- RMC)cement concrete
oftrap/granite/quartzite/gneiss metal in foundation including
necessarybailing out water, compacting and curing (excluding
dewateringby pump).
2Item No. 39 : - Providing & laying in situ PCCM-25
Using4,394.25Cum145.42639011.846111.71888764.799125528.10Batching
plant, transit mixer and concrete pump.(RMC) cementconcrete of
trap/granite/quartzite/ gneiss metal for cast in citu
piers,abutment, returns, wings etc. including provision of "V"
shaped false jointsto form suitable panels on the faces to approve
design withcompacting by vibrating and curing complete, including
form workcentering (excluding dewatering by means of pump) and
includingbailling out water and curing etc. complete. (upto 5.00
mt. height)Note : add 2% for over 5.00 mt.height increase upto
10.00 mt. and 6%height above 10.00 mt.(height for that particular
structure)
3Item No. 40 : - Providing and laying in situ RCCM-30-
Using4,889.85Cum285.001393607.256373.641816486.79437523.28Batching
plant,transit mixer and concrete pump.(RMC)oftrap/granite /
quartzite / gniess metal for reinforced cement concretewell / pile
caps including necessary formwork compaction by vibratingfinishing
and curing etc. complete. (Excluding reinforcement)
4Item No. 41 : - Providing & laying in situ RCCM-30-
Using5,045.25Cum740.003733485.006373.644716492.027520.84Batching
plant,transit mixer and concrete pump.(RMC) cementconcrete of
trap/granite/quartzite/ gneiss metal for cast in cituR.C.C.solid
piers, column etc. including provision of "V" shaped falsejoints to
form suitable panels on the faces to approve design withcompacting
by vibrating and curing complete, including form workcentering
(excluding dewatering by means of pump) and including bailingout
water and curing etc. complete. (upto 5.00 mt. height)
(Excludingreinforcement) Note : add 2% for over 5.00 mt.height
increase upto10.00 mt. and 6% height above 10.00 mt.(height for
that particularstructure)
5Item No. 42 : - BEAMS: Providing and laying in situ
RCCM-30-5,911.50Cum700.004138050.006373.644461546.51257.25Using
Batching plant,transit mixer and concrete pump.(RMC)reinforcement
cement concrete of Trap/granite/quartzite/gneiss metal forR.C.C.
work in solid slab,/ T-beam & slab / Box girder andbalanced
cantilever, including centering,formwork, scaffolding,
ramming,vibrating finishing in cement plaster and curing etc.
complete(excluding reinforcement) Height upto 5.00.mt.from the
lowest bedlevel. Note: a) Solid slab i) 5% for height above 5.00
mtr. to 10.00 mtr. ii)10 % for height above 10.00 mtr., b) T-beam
& slab i) 5% upto 5.00mtr.height ii) 10% for height 5.00mtr. to
10.00mtr. iii) 15% for height above10.00mtr.and c) Box girder and
balanced cantilever i) 20% upto 5.00mtr.height ii) add 25 % for
height 5.00mtr. to 10.00mtr. iii) 30% for heightabove 10.00mtr. d)
Add 30% on basic rate for spat 30 mtr. to 50 mtr. forcreek bridge.
e) Add 75% on basic rate for span 50 mtr. & above for
creekbridge.
6Item No. 43 : - SLAB: Providing and laying in situ RCCM-30-
Using5,911.50Cum8004729200.006373.645098910.37.25Batching
plant,transit mixer and concrete pump.(RMC) reinforcementcement
concrete of Trap/granite/quartzite/gneiss metal for R.C.C. work
insolid slab,/ T-beam & slab / Box girder and balanced
cantilever,including centering,formwork, scaffolding, ramming,
vibrating finishing incement plaster and curing etc. complete
(excluding reinforcement)Height upto 5.00.mt.from the lowest bed
level. Note: a) Solid slab i)5% for height above 5.00 mtr. to 10.00
mtr. ii) 10 % for height above 10.00mtr., b) T-beam & slab i)
5% upto 5.00mtr. height ii) 10% for height5.00mtr. to 10.00mtr.
iii) 15% for height above 10.00mtr.and c) Boxgirder and balanced
cantilever i) 20% upto 5.00mtr. height ii) add 25 %for height
5.00mtr. to 10.00mtr. iii) 30% for height above 10.00mtr. d) Add30%
on basic rate for spat 30 mtr. to 50 mtr. for creek bridge. e) Add
75%on basic rate for span 50 mtr. & above for creek bridge.
7Item No. 44 : - R.C.C. chajja -Providing and laying in situ
RCCM-30-5,911.50Cum20.00118230.006373.64127472.75757.25Using
Batching plant,transit mixer and concrete pump.(RMC)reinforcement
cement concrete of Trap/granite/quartzite/gneiss metal forR.C.C.
work in solid slab,/ T-beam & slab / Box girder and
balancedcantilever, including centering,formwork, scaffolding,
ramming, vibratingfinishing in cement plaster and curing etc.
complete (excludingreinforcement) Height upto 5.00.mt.from the
lowest bed level. Note:a) Solid slab i) 5% for height above 5.00
mtr. to 10.00 mtr. ii) 10 % forheight above 10.00 mtr., b) T-beam
& slab i) 5% upto 5.00mtr. heightii) 10% for height 5.00mtr. to
10.00mtr. iii) 15% for height above10.00mtr.and c) Box girder and
balanced cantilever i) 20% upto 5.00mtr.height ii) add 25 % for
height 5.00mtr. to 10.00mtr. iii) 30% for heightabove 10.00mtr. d)
Add 30% on basic rate for spat 30 mtr. to 50 mtr. forcreek bridge.
e) Add 75% on basic rate for span 50 mtr. & above for
creekbridge.
8Item No. 45 : - R.C.C. waist slabs, steps and parapet:
Providing
and5,911.50Cum85.00502477.506373.64541759.2193757.25laying in situ
RCCM-30- Using Batching plant,transit mixer andconcrete pump.(RMC)
reinforcement cement concrete ofTrap/granite/quartzite/gneiss metal
for R.C.C. work in solid slab,/ Tbeam& slab / Box girder and
balanced cantilever, includingcentering,formwork, scaffolding,
ramming, vibrating finishing in cementplaster and curing etc.
complete (excluding reinforcement) Heightupto 5.00.mt.from the
lowest bed level. Note: a) Solid slab i) 5% forheight above 5.00
mtr. to 10.00 mtr. ii) 10 % for height above 10.00 mtr.,b) T-beam
& slab i) 5% upto 5.00mtr. height ii) 10% for height5.00mtr. to
10.00mtr. iii) 15% for height above 10.00mtr.and c) Boxgirder and
balanced cantilever i) 20% upto 5.00mtr. height ii) add 25 %for
height 5.00mtr. to 10.00mtr. iii) 30% for height above 10.00mtr. d)
Add30% on basic rate for spat 30 mtr. to 50 mtr. for creek bridge.
e) Add 75%on basic rate for span 50 mtr. & above for creek
bridge.
9Item No. 46 : - R.C.C. pardi 75mm thick: Providing and laying
in5,911.50Cum22.00130053.006373.64140220.033257.25situ RCCM-30-
Using Batching plant,transit mixer and concretepump.(RMC)
reinforcement cement concrete ofTrap/granite/quartzite/gneiss metal
for R.C.C. work in solid slab,/ Tbeam& slab / Box girder and
balanced cantilever, includingcentering,formwork, scaffolding,
ramming, vibrating finishing in cementplaster and curing etc.
complete (excluding reinforcement) Heightupto 5.00.mt.from the
lowest bed level. Note: a) Solid slab i) 5% forheight above 5.00
mtr. to 10.00 mtr. ii) 10 % for height above 10.00 mtr.,b) T-beam
& slab i) 5% upto 5.00mtr. height ii) 10% for height5.00mtr. to
10.00mtr. iii) 15% for height above 10.00mtr.and c) Boxgirder and
balanced cantilever i) 20% upto 5.00mtr. height ii) add 25 %for
height 5.00mtr. to 10.00mtr. iii) 30% for height above 10.00mtr. d)
Add30% on basic rate for spat 30 mtr. to 50 mtr. for creek bridge.
e) Add 75%on basic rate for span 50 mtr. & above for creek
bridge.
10Item No. 47 : - Providing and fixing in position-T.M.T.
bar55,150.20M.T.540.0029781108.0060963.50329202909.54reinforcement
of various diameters for R.C.C. pile caps, footings,foundations,
slabs, beams, columns, canopies, staircases, newels,
chajjas,lintels, pardies, coping, fins, arches, etc. as per
detailed designs,drawings and schedules, including cutting,
bending, hooking the bars,binding with wires or tack welding and
supporting as required
etc.complete.43132603.548006690.8501254874087.35012511%11Item No.
48 : - Providing Second class Burnt Brick masonry
with3,434.55Cum366.001257045.304927.381803421.6112173130.30conventional
/ I.S. type bricks in cement mortar 1:6 in foundations andplinth of
inner walls & external walls, including bailing out
watermanually, striking joints on unexposed faces, racking out
joints on exposedfaces and watering etc. complete.
12Item No. 49 : - Providing Second Class Burnt Brick masonry
with3,729.60Cum1,056.223939278.114927.385204398.8366118924.31conventional/I.S.
type bricks in cement mortar 1:6 in superstructure,including
striking joints, racking out joints, watering and scaffolding
etc.complete.
13Item No. 50 : - Providing Second Class Burnt Brick masonry
with448.35Sqm.1,099.11492785.97666.13732148.68887836732.69conventional
/ I.S. type bricks in cement mortar 1:4 in half brickthick wall
including mild steel longitudinal reinforcement of 2 barsof 6mm
diameter / 2 hoop iron strips 25mm x 1.6 mm painted
withanticorrosive paint at every third course properly bent and
bonded atends, scaffolding, racking out joints and watering etc.
complete.
14Item No. 52 : - Providing and applying Internal cement plaster
of 12mm122.85Sqm.3,665.51450307.90225.03824837.09037535645.41thick
in single coat in cement mortar 1:3 without neeru finish to
concretesurface in all positions including scaffolding, curing
complete.
15Item No. 53 : - Providing internal cement plaster 20mm thick
in a145.95Sqm.9,149.351335347.63301.782761128.3384549751.64single
coat, in cement mortar 1:3 without neeru finish to stonemasonry
surface in all positions including scaffolding, racking outjoints,
providing groove at joints of stone masonry and concrete membersand
curing etc. complete.
16Item No. 56 : - Providing sand face plaster externally in two
coats305.55Sqm.5,663.531730491.59442.532506282.5521236330.95using
approved screened sand in all positions, includingproviding base
coat of 15 mm thick in cement mortar 1:4 mixingapproved water
proofing compound at the rate of 1 kilogram / 50 kgof cement and
curing the same for not less than two days and keepingthe surface
of base coat rough to receive the sand faced treatment 8 mmthick in
cement mortar 1:4 and finishing the surface by taking out grainsand
curing for 14 days including preparing the surface and scaffolding
etc.complete.
17Item No. 57 : - Providing flush grooved pointing with cement
mortar61.95Sqm.114.207074.6974.958559.2917.341:3 to stone masonry
including scaffolding and curing etc. complete.
18Item No. 58 : - Providing and fixing chicken wire mesh
(Reference386.40Sqm.511.49197639.74463.68237167.6816.67IS:
3150-1982 )of 19 size of aperture at the junction of R.C.C
membersand brick work, of approved quality including fixing mesh in
position bynecessary nailing in concrete or/B.B. masonry and or
tying by binding wireetc. complete.
19Item No. 59 : - Providing and laying in position polished Kota
Stone831.60Sqm.165.31137471.801409.09232936.47410513240.98flooring
55 cm. x 55 cm. of approved quality 25mm to 30mm thickin
plain/diamond pattern on a bed of cement mortar 1:6 includingcement
float, filling joints with neat cement slurry, curing, polishing
andcleaning etc.
complete.99341159.40115110062.0215768902.6215.87%
Sheet2
Sheet3
