9
Thermoplastic Hose Quick Reference Guide

Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Embed Size (px)

Citation preview

Page 1: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Thermoplastic HoseQuick Reference Guide

Page 2: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

SAE 100R3

Applications

Low Pressure HydraulicsHigh Pressure PneumaticsHand ToolsLubrication SystemPilot Lines and Joystick Controls

•••••

Features

Bonded ConstructionExcellent Kink ResistanceMaximum Flex LifeLow Volumetric ExpansionAvailable - Twin or Multi-lineTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - PolyurethaneCover Color - Black, Perforated

•••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC1,500 - 2,000 PSI103 - 150 bar

4703

Applications

General HydraulicsMaterial HandlingMobile HydraulicsAgricultural EquipmentLubrication Systems

•••••

Features

Bonded ConstructionExcellent Kink ResistanceMaximum Flex LifeLong Continuous LengthAvailable - Twin or Multi-LineTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - PolyurethaneCover Color - Black, Perforated

•••••••••

Specifications-40ºF to +212ºF-40ºC to +100ºC1,000 - 3,000 PSI69 - 207 bar

4700

Applications

General HydraulicsMaterial HandlingMobile HydraulicsAgricultural EquipmentLubrication Systems

•••••

Features

Bonded ConstructionExcellent Abrasion ResistanceLow Coefficient of FrictionMaximum Flex LifeLow I.D. to O.D. Ratios, Slim, and LightweightAvailable - Twin or Multi-lineTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - Proprietary Polyurethane Blend (“Tuffskin”)Cover Color - Black, Perforated

•••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC1,000 - 3,000 PSI69 - 207 bar

4704

Applications

General Hydraulics Where Electrical Non-conductivity is RequiredElectrical Utility Truck Hydraulic SystemAerial Equipment (Pickers)Rescue Apparatus and Tools

••

Features

Bonded ConstructionMeets SAE J517 that Requires Less Than 50 Micro-Amperes Leakage When Subjected to 75,000 Volts/Ft For 5 MinutesComplies with ANSI 92.2 for Vehicle Mounted Aerial DevicesLow Coefficient of Friction CoverExcellent Abrasion and UV Resistant CoverLow I.D. to O.D. Ratios, Slim, LightweightAvailable - Twin or Multi-LineTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - Proprietary Polyurethane Blend (“Tuffskin”)Cover Color - Orange, Non-Perforated

••

•••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC1,000 - 3,000 PSI69 - 207 bar

4704 NC

SAE 100R7

Page 3: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

General Hydraulic and Pneumatic SystemsHigh Pressure Gas TransferAgricultural SprayingUrethane Foam MixersRobotics

••••

Features

Bonded ConstructionExcellent Chemical CompatibilityExcellent Kink ResistanceMaximum Flex LifeAvailable - Twin and Multi-lineTube - NylonReinforcement - Single Polyester BraidCover - Proprietary Polyurethane Blend (“Tuffskin”)Cover Color - Black, Perforated

••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC1,000 - 3,000 PSI69 - 207 bar

4705

Applications

General Hydraulics and Pneumatic Systems Where a Flame-Retardant Cover is Required to Give Optimum Protection

Features

Bonded ConstructionFlame Retardant Polyurethane CoverExcellent Kink ResistanceMaximum Flex LifeAvailable - Twin or MultilineTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - Flame Retardant PolyurethaneCover Color - Black, Non-Perforated

•••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC1,000 - 3,000 PSI69 - 207 bar

4700FR

Applications

Hydraulic and Pneumatic SystemsHigh Pressure Gas and Chemical TransferMobile EquipmentMachine ToolsAgricultural Equipment

•••

Features

Bonded Construction100R8 Performance @ 100R7 DimensionsLow Volumetric ExpansionLighter and Smaller O.D. than 100R2Available - Twin or Multi-LineTube - NylonReinforcement - Single Aramid BraidCover - PolyurethaneCover Color - Black, Perforated

•••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC2,000 - 5,000 PSI138 - 345 bar

4800

SAE 100R8

Applications

General Hydraulics Where Electrical Non-Conductivity is RequiredAerial EquipmentMobile MachineryRescue Tools

•••

Features

Bonded ConstructionLow Coefficient of FrictionMeets SAE J517 That Requires Less Than 50 Micro-Amperes Leakage When Subjected to 75,000 Volts/Ft for 5 Minutes100R8 Performance @ 100R7 DimensionsLow Volumetric ExpansionUV Resistant CoverAvailable - Twin or Multi-LineTube - NylonReinforcement - Single Aramid BraidCover - Proprietary Polyurethane Blend (“TuffSkin”)Cover Color - Orange, Non-Perforated

•••

•••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC2,000 - 5,000 PSI138 - 345 bar

4800 NC

Page 4: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

General Hydraulic SystemsMobile EquipmentHydraulic ToolsHigh Pressure Pneumatic SystemHigh Pressure Chemical Transfer

••••

Features

Bonded ConstructionSuperior Impulse Cycling and FlexingExcellent Fluid CompatibilityRobust ConstructionAvailable - Twin or Multi-LineTube - NylonReinforcement - Two Polyester BraidsCover - PolyurethaneCover Color - Black, Perforated

•••••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC2,000 - 5,000 PSI138 - 345 bar

4850

Applications

General Hydraulic Systems Where Electrical Non-Conductivity is RequiredAerial/Utility EquipmentMobile EquipmentRescue Tool

•••

Features

Bonded ConstructionMeets SAE J517 That Requires Less Than 50 Mi-cro-Amperes Leakage When Subjected to 75,000 Volts/Ft for 5 MinutesSuperior Impulse Cycling and FlexingUV Resistant CoverLow Coefficient CoverAvailable - Twin or Multi-LineTube - NylonReinforcement - Two Polyester BraidsCover - Proprietary Polyurethane Blend (“Tuff-Skin”)Cover Color - Orange, Non-Perforated

••

•••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC2,000 - 5,000 PSI138 - 345 bar

4850 NC

Applications

Fork truck (over-the-sheave)Cold storage and refrigerated areasMaterial HandlingConstruction EquipmentGeneral Hydraulics & Hydraulic ToolsAgricultural EquipmentLubrication Equipment

•••

••

Features

Bonded ConstructionSuperior Flexibility in Cold Temperature ApplicationsLow Coefficient of Friction Cover (non-stick)Excellent Bend RadiusOptimum Flex LifeTube - Polyester ElastomerReinforcement - One or Two Polyester BraidsCover - Polyester Elastomer (Non-Stick)Cover Color - Black, Perforated

••

•••••••

Specifications

-70ºF to +212ºF-57ºC to +100ºC3,000 PSI207 bar

4730LT

Applications

Mobile General HydraulicsLubrication EquipmentConstruction/Agricultural Equipment

•••

Features

Cut ResistantCrush ResistantLow I.D. to O.D. Ratios, Slim/LightweightTube - Polyester ElastomerReinforcement - Wire BraidCover - PolyurethaneCover Color - Black, Non-Perforated

•••••••

Specifications

-40ºF to +250ºF-40ºC to +121ºC3,000 - 4,500 PSI207 - 310 bar

4920

SAE 100R18

General Hydraulic Hose

Page 5: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

High Pressure Hydraulic ToolsRescue EquipmentHigh Pressure Test EquipmentJacking Systems

••

Features

Bonded ConstructionLow Volumetric ExpansionLow I.D. to O.D. RatiosSuperior Flexibility and Bend Radius in Compari-son to Multi-Spiral DesignsAvailable - Single or Twin LineTube - NylonReinforcement - Two Aramid BraidsCover - PolyurethaneCover Color - Black, Perforated

••••

•••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC8,000 - 10,000 PSI552 - 690 bar

4810

Applications

High Pressure Hydraulics Systems Where Electrical Non-Conductivity is RequiredRescue EquipmentMobile EquipmentAerial Equipment

•••

Features

Bonded ConstructionLow Volumetric ExpansionLow I.D. to O.D. RatiosSuperior Flexibility and Bend Radius in Comparison to Multi-Spiral DesignsMeets SAE J517 that Requires Less Than 50 Micro-Amperes Leakage When Subjected to 75,000 Volts/Ft for 5 Minutes.Available - Single or Twin LineTube - NylonReinforcement - Two Aramid BraidsCover - Proprietary Polyurethane Blend (“Tuff-Skin”)Cover Color - Orange, Non-Perforated

••••

••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC8,000 - 10,000 PSI552 - 690 bar

4810 NC

Very High Pressure Hose

Applications

High Pressure Hydraulic SystemsHigh Pressure PumpsRescue EquipmentJacking Systems

•••

Features

Bonded ConstructionLow Volumetric ExpansionLow I.D. to O.D. RatiosSuperior Flexibility and Bend Radius in Comparison to Multi-Spiral DesignsAvailable - Single or Twin LineTube - NylonReinforcement - One Aramid/One Wire BraidCover - PolyurethaneCover Color - Black, Non-Perforated

••••

•••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC10,000 PSI690 bar

4930

Applications

Hand Held Grease GunCentral Lubrication Systems

••

Features

Bonded ConstructionVery Flexible and CompactReplaces Rigid Nylon and/or Steel PipeTube - Polyester ElastomerReinforcement - Single Polyester BraidCover - PolyurethaneCover Color - Black, Perforated

•••••••

Specifications

-40ºF to +150ºF-40ºC to +66ºC3,000 PSI207 bar

4702

Specialty Hose

Page 6: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

Pure Water TransferDeionized WaterDistilled WaterPotable WaterFood Products

•••••

Features

Bonded ConstructionMade with NSF, FDA Approved MaterialsPlasticizer Free, Non-Leaching Core TubePrevents moisture transmission, extraction of contaminates.Tube - PolyolefinReinforcement - Single Polyester BraidCover - PolyurethaneCover Color - Blue, Non-Perforated

••••

••••

Specifications

-10ºF to +150ºF-23ºC to +66ºC1,500 - 2,750 PSI104 - 190 bar

4750

Applications

Conveying Urethane Foam ComponentsMoisture Sensitive Chemicals

Features

Bonded ConstructionLow moisture permabilityPlasticizer Free Core TubeUV Resistant CoverCustom Colors AvailableAvailable - Twin or Multi-LineTube - PolyolefinReinforcement - Single Polyester BraidCover - PolyurethaneCover Color - Black, Perforated

••••••••••

Specifications

-10ºF to +150ºF-23ºC to +66ºC1,000 - 2,750 PSI69 - 190 bar

4760

Applications

Air Compressor StationsSCUBA Tank Refilling StationsMobile Air WagonsCascade Systems

••

••

Features

Bonded ConstructionExcellent FlexibilityLow I.D. to O.D. RatioUV Resistant CoverAvailable - Twin or Multi-LineTube - NylonReinforcement - Aramid FiberCover - PolyurethaneCover Color - Gray, Perforated

•••••••••

Specifications

-40ºF to +180ºF-40ºC to +82ºC6,000 PSI414 bar

4804

Applications

Airless Paint Spray Supply Lines

Features

Bonded ConstructionExtremely Kink ResistantProprietary Design for Improved FlexibilityResistant to Most Chemicals, Paints, and SolventsWireless Design Dissipates Static ElectricityCertified to UL-1450 SpecificationsTube - Nylon 11Reinforcement - Two Polyester Braids w/ Conductive MaterialCover - PolyurethaneCover Color - Blue, Non-Perforated (Other Colors Available)

••••••••

••

Specifications

-40ºF to +180ºF-40ºC to +82ºC3,300 PSI228 bar

4710

Paint Spray Hose

Page 7: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

Airless Paint EquipmentHigh Pressure Applications

••

Features

High Pressure PerformanceSteel Braid Guarantees Electrical ConductivityExcellent Flexibility w/ Small Bend RadiusTube - NylonReinforcement - One Wire BraidCover - PolyurethaneCover Color - Black, Perforated

•••••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC3,000 - 5,000 PSI207 - 345 bar

4900

Applications

Airless Paint Spray EquipmentExtra High Pressure Applications

Features

Extra High Pressure PerformanceDouble Braid Ensures Mechanical StrengthResistant to Most Chemicals, Paints, and ElementsExcellent Flexibility With Small Bend RadiusTube - NylonReinforcement - Two Wire BraidCover - PolyurethaneCover Color - Blue, Perforated

•••

•••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC5,000 - 6,170 PSI345 - 426 bar

4910

Applications

Airless Paint Spray EquipmentVery High Pressure Applications

Features

Very High Pressure PerformanceResistant to Most Chemicals, Paints and SolventsExcellent Flexibility With Small Bend RadiusLight Weight in Comparison to Multi-Spiral ConstructionTube - NylonReinforcement - One Aramid / One Wire BraidCover - PolyurethaneCover Color - Red, Perforated

••••

••••

Specifications

-40ºF to +212ºF-40ºC to +100ºC7,200 - 10,000 PSI497 - 690 bar

4940

Applications

High Pressure Water CleaningLateral Sewer LinesWater Jetting EquipmentNot for Hydraulic Applications

•••

Features

Bonded ConstructionSlim Profile and Light WeightFlexible and Kink ResistantBlack Color Denotes 4000 PSILow Coefficient of FrictionExcellent Cut, Gouge and Abrasion ResistanceTube - Polyester Elastomer (Cream Color)Reinforcement - One Aramid BraidCover - Proprietary Urethane Blend (“Tuff-Skin”)Cover Color - Black, Non-Perforated (Other Colors Available)

••••••••••

Specifications

-40ºF to +135ºF-40ºC to +57ºC4,000 PSI276 bar

4610

Sewer Cleaning Hose

Page 8: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Applications

High Pressure Sewer CleaningSewer & Water Jetting EquipmentNot for Hydraulic Applications

Features

Bonded ConstructionExcellent Kink Resistance and FlexibilityBlue Color Denotes 3000 PSILow Coefficient of FrictionExcellent Cut, Gouge and Abrasion ResistanceTube - Polyester Elastomer (Cream Color)Reinforcement - Two Polyester BraidsCover - Proprietary Polyurethane Blend (“Tuff-Skin”)Cover Color - Blue, Non-Perforated

••••••••

Specifications

-40ºF to +135ºF-40ºC to +57ºC3,000 PSI207 bar

4630

Applications

High Pressure Water JettingLateral Sewer LinesNot for Hydraulic Applications

•••

Features

Bonded ConstructionExcellent Kink Resistance and FlexibilityGreen Color Denotes 4000 PSILow Coefficient of FrictionExcellent Cut, Gouge and Abrasion ResistanceTube - Polyester Elastomer (Cream Color)Reinforcement - Two Polyester BraidsCover - Proprietary Polyurethane Blend (“Tuff-Skin”)Cover Color - Green, Non-Perforated

••••••••

Specifications

-40ºF to +135ºF-40ºC to +57ºC4,000 PSI276 bar

4640

Applications

Sewer CleaningSewer & Water Jetting EquipmentNot for Hydraulic Applications

••

Features

Bonded ConstructionExcellent Kink Resistance and FlexibilityOrange Color Denotes 2500 PSILow Coefficient of FrictionExcellent Cut, Gouge and Abrasion ResistanceTube - Polyester Elastomer (Cream Color)Reinforcement - Single Polyester BraidCover - Proprietary Polyurethane Blend (“Tuff-Skin”)Cover Color - Orange, Non-Perforated

••••••••

Specifications

-40ºF to +135ºF-40ºC to +57ºC2,500 PSI173 bar

4625

Polyurethane Air Tool Hose

Applications

Aerospace ManufacturersAir ToolsAuto RepairAutomotive Assembly LinesCar Wash SystemsDental Drill EquipmentElectronic Controls & InstrumentationMachine ShopsMaintenance ShopsNailing and StaplingPaint ShopsRoboticsService StationsTire Shops

•••••••

•••••••

Features

Integral Strain Relief & Re-usable FittingsExcellent Recoil Memory; Superior to Competitor’s Loose Coil10 Times More Durable Than RubberSmall Coil Diameter Allows for Compact StorageResistant to Oil, Grease, Corrosion and Abrasion1/4” and 3/8” ID Sizes Available10-50 Ft Lengths Available

••

•••••

Specifications

125 PSI @ 70°F8 bar @ 21°C

Recoil Air Hose

Page 9: Quick Reference Guide - Thermoplastic Hose · PDF fileQuick Reference Guide. Page SAE 100R3 Applications Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System

Page �

Poly-Flow LLC2668 NE Riverside WayPortland, Oregon 97211

(503) 493-0015Fax: (503) [email protected]

Applications

Aerospace ManufacturersAir ToolsAuto RepairAutomotive Assembly LinesCar Wash SystemsDental Drill EquipmentElectronic Controls & InstrumentationMachine ShopsMaintenance ShopsNailing and StaplingPaint ShopsRoboticsService StationsTire Shops

•••••••

•••••••

Features

85 Durometer Polyurethane Compound Provides Extreme FlexibilityRugged Brass Reusable Fittings For Long Service LifeSoft Polyurethane is Non-MaringSmooth Tube Bore For Maximum Air FlowThermally Bonded Cover and Tube for Maximum Adhesion & Zero Ply SeparationSpecially Engineered Strain Reliefs to Eliminate Hose Kink at the FittingReinforcement - Dacron PolyesterCover - 85A Ether-Based PolyurethaneFittings: 2 Piece Reusable Solid Brass FittingsNylon Integrated Strain Relief: Specially Engineered for Maximum Strain ReliefUV Stabilized: Special Additive for Longer Hose Life & Color IntegrityAvailable in 50’, 100’ & Bulk Lengths

•••

••••

Specifications

-40°F to +165°F-40°C to +74°C225 PSI @ 70°F16 bar @ 21°C

Air Hose