Embed Size (px)
Citation preview
Quick Operation Guide
Quick Zero & Calibration (Optional)
10s
Quick Config Display Switch On
Alarm AcknowledgeSelf Test
1s1s
PumpManual Datalog
1s
2s
Switch Off
3s
Calibration Overdue
www.teledynegfd.com
This Quick Operation Guide is NOT a substitute for the Operations & Maintenance Manual which MUST be read andunderstood, prior to operating, by anyone using or servicing the monitor. Failure to do so may result in serious injury or death.
Part Number: 64191Issue 7.1
BacklightMAX / MIN / STEL / LTEL
ResetMAX / MIN
20s
Zero Fault / Flow Fault
1s
Charging
4h
![Configuring SSH and Telnet - Cisco · Step2 switch(config)#no feature ssh DisablestheSSHserver. Step3 switch(config)#no ssh key [dsa |rsa] DeletestheSSHserverkey. ThedefaultistodeletealltheSSHkeys](https://img.pdfslide.us/doc/110x75/6139042aa4cdb41a985b6ed3/configuring-ssh-and-telnet-cisco-step2-switchconfigno-feature-ssh-disablesthesshserver.jpg)
![Configuring Access Control Lists...3. switch(config-acl)#[sequence-number]{permit|deny}protocolsourcedestination 4. (Optional)switch(config-acl)#statistics 5. (Optional)switch#show{ip|ipv6}access-listsname](https://img.pdfslide.us/doc/110x75/6138cac90ad5d20676497a43/configuring-access-control-lists-3-switchconfig-aclsequence-numberpermitdenyprotocolsourcedestination.jpg)
