1
Ordering Information Key Features QSP-8229A-R2L Quad Split QSP-8229A Quad Split Rear Module Suffix (ex: [model]-R2) -R2 Rear Module for QSP-8229A -R2L Looping Rear Module for QSP-8229A Quad image processor 4 passive looping inputs available with the -R2L looping rear module 4 configurable outputs, pass-through / quad split Source ID labeling Quadrant bordering with adjustable width, color and transparency Any quadrant can be taken full screen <1 frame of processing delay Independent proc amp control on each output Auto-detection of HD / SD input Local GPI control 5-year transferable warranty Power: 18.4 watts Quad Split A cost-effective, single card solution for viewing up to 4 inputs on a single display. The QSP-8229A is a very cost-effective solution for monitoring up to 4 video inputs. The 4 video inputs are combined into a single quad split output with configurable UMD and bordering capability. In addition to the 4 inputs, the QSP-8229A offers 4 independent outputs that can be configured to display either the combined quad output or pass-through of the input, with full proc control, offering additional outputs for use elsewhere. Unique to the quad processor is passive looping inputs allowing the card to fit into any video path without the need for additional DAs. Looping is performed on the back module ensuring the signal path is not lost even when the processor is removed. DashBoard control allows each quadrant to optionally display a static source ID and / or borders with fully adjustable color and transparency. Each output can be triggered to display the quad split or full screen with local GPI control or remote DashBoard control. This feature is extremely useful when a full screen image is desired to verify video quality. PROC AMP SERIALIZER DESERIALIZER FRAME SYNC/ VIDEO SCALER 4:1 DESERIALIZER FRAME SYNC/ VIDEO SCALER 4:1 DESERIALIZER FRAME SYNC/ VIDEO SCALER 4:1 DESERIALIZER FRAME SYNC/ VIDEO SCALER 4:1 SDI OUT 1 (BNC 9) BKGD A SDI IN (BNC 5) BKGD A LOOP (BNC 6) BKGD B SDI IN (BNC 1) BKGD B LOOP (BNC 2) BKGD C SDI IN (BNC 4) BKGD C LOOP (BNC 3) BKGD D SDI IN (BNC 8) LOCAL REF (BNC 11) BKGD D LOOP (BNC 7) QUAD DISPLAY CONTROLLER CROSSPOINT LINE SYNC LINE SYNC LINE SYNC LINE SYNC DRIVER PROC AMP SERIALIZER SDI OUT 2 (BNC 10) DRIVER PROC AMP SERIALIZER SDI OUT 3 (BNC 12) DRIVER PROC AMP SERIALIZER SDI OUT 4 (BNC 13) DRIVER FRAME REF 1 FRAME REF 2 VIDEO OUTPUT TIMING GENERATOR CARD CONTROL LOCAL AREA NETWORK SERIAL PORT 8 GPI INPUTS Only 4 analog inputs are available when using the -R2L split rear module. * QSP-8229A 3D HD SD BKGD B IN BKGD A IN BKGD A LOOP OUT 1 OUT 3 REF IN GPI 1, 2 BKGD C IN BKGD C LOOP BKGD B LOOP BKGD D IN BKGD D LOOP OUT 2 SERIAL COM PORT OUT 4 ETHERNET PORT GPI 1, 2 GPI 5, 6 GPI 7, 8

QSP-8229A HD SD 3D - Ross Video Sheets/Infrastructure/QSP-8229A.pdfThe QSP-8229A is a very cost-effective solution for monitoring up to 4 video inputs. The 4 video inputs are combined

  • Upload
    others

  • View
    12

  • Download
    0

Embed Size (px)

Citation preview

Page 1: QSP-8229A HD SD 3D - Ross Video Sheets/Infrastructure/QSP-8229A.pdfThe QSP-8229A is a very cost-effective solution for monitoring up to 4 video inputs. The 4 video inputs are combined

Ordering Information

Key Features

QSP-8229A-R2L

QuadSplitQSP-8229A QuadSplit

RearModuleSuffix(ex:[model]-R2)-R2 RearModuleforQSP-8229A-R2L LoopingRearModuleforQSP-8229A

•Quadimageprocessor•4passiveloopinginputsavailablewiththe-R2Lloopingrearmodule

•4configurableoutputs,pass-through/quadsplit•SourceIDlabeling•Quadrantborderingwithadjustablewidth,colorandtransparency

•Anyquadrantcanbetakenfullscreen•<1frameofprocessingdelay•Independentprocampcontroloneachoutput•Auto-detectionofHD/SDinput•LocalGPIcontrol•5-yeartransferablewarranty•Power:18.4watts

QuadSplitAcost-effective,singlecardsolutionforviewingupto4inputsonasingledisplay.

TheQSP-8229Aisaverycost-effectivesolutionformonitoringupto4videoinputs.The4videoinputsarecombinedintoasinglequadsplitoutputwithconfigurableUMDandborderingcapability.Inadditiontothe4inputs,theQSP-8229Aoffers4independentoutputsthatcanbeconfiguredtodisplayeitherthecombinedquadoutputorpass-throughoftheinput,withfullproccontrol,offeringadditionaloutputsforuseelsewhere.

UniquetothequadprocessorispassiveloopinginputsallowingthecardtofitintoanyvideopathwithouttheneedforadditionalDAs.Loopingisperformedonthebackmoduleensuringthesignalpathisnotlostevenwhentheprocessorisremoved.

DashBoardcontrolallowseachquadranttooptionallydisplayastaticsourceIDand/orborderswithfullyadjustablecolorandtransparency.EachoutputcanbetriggeredtodisplaythequadsplitorfullscreenwithlocalGPIcontrolorremoteDashBoardcontrol.Thisfeatureisextremelyusefulwhenafullscreenimageisdesiredtoverifyvideoquality.

PROCAMP SERIALIZER

DESERIALIZERFRAME SYNC/VIDEO SCALER

4:1

DESERIALIZERFRAME SYNC/VIDEO SCALER

4:1

DESERIALIZERFRAME SYNC/VIDEO SCALER

4:1

DESERIALIZERFRAME SYNC/VIDEO SCALER

4:1

SDI OUT 1(BNC 9)

BKGD A SDI IN(BNC 5)

BKGD A LOOP(BNC 6)

BKGD B SDI IN(BNC 1)

BKGD B LOOP(BNC 2)

BKGD C SDI IN(BNC 4)

BKGD C LOOP(BNC 3)

BKGD D SDI IN(BNC 8)

LOCAL REF(BNC 11)

BKGD D LOOP(BNC 7)

QU

AD D

ISPL

AY C

ON

TRO

LLER

CR

OSS

POIN

T

LINE SYNC

LINE SYNC

LINE SYNC

LINE SYNC

DRIV

ER

PROCAMP SERIALIZER

SDI OUT 2(BNC 10)

DRIV

ER

PROCAMP SERIALIZER

SDI OUT 3(BNC 12)

DRIV

ER

PROCAMP SERIALIZER

SDI OUT 4(BNC 13)

DRIV

ER

FRAME REF 1

FRAME REF 2

VIDEOOUTPUTTIMING

GENERATOR

CARDCONTROL

LOCAL AREANETWORK

SERIAL PORT8 GPI INPUTS

Only 4 analog inputs are available when using the -R2L split rear module.

*

QSP-8229A 3DHD SD

BKGD B IN

BKGD A IN

BKGD A LOOP

OUT 1

OUT 3

REF IN

GPI 1, 2

BKGD C IN

BKGD CLOOP

BKGD BLOOP

BKGD D IN

BKGD D LOOP

OUT 2

SERIAL COM PORT

OUT 4ETHERNETPORT

GPI1, 2

GPI5, 6

GPI7, 8