Upload
mile-belojica
View
216
Download
0
Embed Size (px)
Citation preview
8/14/2019 q8oils_bitumen
1/2
Q8 Bitumen
8/14/2019 q8oils_bitumen
2/2
www.Q8Oils.com
Q8 BitumenQ8 Bitumen is a high quality product produced in three types, Penetration,
Hard and Industrial, all derived from Kuwait Export Crude (K.E.C). The
applications for Q8 Bitumen range from road asphalts to printing inks.
PI=
20xtr&b + 500xlogP - 1952
tr&b - 50xlogP + 120
Penetration Grade Bitumens are manufactured by fractional distillationin a vacuum distillation column and are therefore straight run products.
Penetration (or paving grade bitumens) are designated by the penetration
rating, following the grading system of the European Standard EN12591.
Applications include:
Hot asphalt and mastic asphalt applications
Dike reinforcementEmulsion production
Modified asphalt production
Hard & Industrial Grade Bitumen products are manufactured bypropane extraction (PPA), blending of PPA and vacuum bottoms and by
blowing (H95) respectively. Applications include:
Printing ink
Mastic asphalt production
Thin layers for road building (high modulus bitumen concrete)
CertificationProduction of Q8 Bitumen is conducted under quality and environmental
management systems certified by Lloyds Register Quality AssuranceNEN-EN-ISO 9001:2000 and NEN-EN-ISO 14001:2004.
1
Q8 Bitumen benefits from a unique position in the petroleum market.
We have our own source of crude oil, Kuwait Export Crude (K.E.C.), and
Q8 Bitumen is only derived from this feedstock.
The quality trail continues through the refining stage as we only use
one of our four refineries to manufacture bitumen, Q8 Europoort in
Rotterdam. Only using the one plant guarantees our customers a
consistency of product quality from one year to the next.
2
Quality products and processes are only achieved through extensive
research and development by highly skilled technicians. KuwaitPetroleum Research and Technology (KPR&T) in Rotterdam has a
reputation with our customers for their technical ability in both product
development and the science of product application.
PI identification: High PI means, low temperature sensitivity of the bitumen.
Low PI means, high temperature sensitivity of the bitumen.The average PI for Q8 Penetration Bitumen is: -1.2
Kuwait Petroleum International Lubricants,
Petroleumkaai 7, B-2020 Antwerp, Belgium.
Contact email: [email protected]
3
Properties
Q8 Penetration Grade Bitumens
Q8 Hard Paving Grade Bitumens
Grade (EN 12591) 20/30 30/45 35/50 40/60 50/70 70/100 160/220
Property Unit
Penetration @ 25C (# @ 15C) 0.1mm 20-30 30-45 35-50 40-60 50-70 70-100 160-220Softening Point R&B C 55-63 52-60 50-58 48-56 46-54 43-51 35-43
Penetration Index ( ) -1 -1 -1 -1 -1 -1 -1
Density, 25C, typical kg/m3 1044 1040 1037 1035 1033 1029 1019
Flash Point C.O.C. minimum C 240 240 240 230 230 230 220
Solubility in Xylene % mass 99 99 99 99 99 99 99
Viscosity @ 60C, typical Pa.s 930 502 420 340 260 160 54
Viscosity @ 135C, typical mm2/s 870 660 605 550 485 385 225
Production Temperature, typical C 163-173 157-167 156-166 154-164 151-161 147-157 137-147
Resistance to Hardening UnitChange of mass % mass