76
Experience In Motion Pump Product Catalog

Pump Product Catalog - Welcome to PP&S, Inc. Product Catalog.… · Pump Product Catalog. ... Nuclear Pumps and Seals ... Drilling and Production FPSO Water and CO 2 Injection Water

  • Upload
    dodung

  • View
    255

  • Download
    3

Embed Size (px)

Citation preview

Experience In Motion

Pump Product Catalog

Product Brands of Distinction

ACEC™ Centrifugal Pumps

Aldrich® Pumps

Byron Jackson® Pumps

Calder™ Energy Recovery Devices

Cameron ® Pumps

Durco ® Pumps

Flowserve® Pumps

IDP ® Pumps

Jeumont-Schneider™ Pumps

Niigata Worthington™ Pumps

Pacific ® Pumps

Pleuger ® Pumps

Scienco ® Pumps

Sier-Bath ® Rotary Pumps

TKL™ Pumps

United ® Centrifugal Pumps

Western Land Roller ® Irrigation Pumps

Wilson-Snyder ® Pumps

Worthington ® Pumps

Worthington Simpson® Pumps

Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth of expertise in the successful application of pre-engineered, engineered and special purpose pumps and systems.

Pump Supplier to the World

2

3

flowserve.com

Committed to the Complete Pump System Life CycleFor more than two centuries, Flowserve has served industries requiring solutions that add value and reduce costs throughout the life cycle of a pumping system.

Oil and gas•Chemical•Power generation•Water•General industry•

Flowserve partners with customers to respond to the dynamic business conditions that affect them and to improve efficiency, maximize throughput and control process quality. Whether customer needs involve on-site technical assistance, equipment upgrades or broader project planning with full turnkey responsibility, Flowserve delivers professional, reliable results.

Pump DesignsFlowserve offers a wide range of complementary pump types, built to recognized global standards and customer specification. These include:

Single stage process •Between bearings single stage•Between bearings multistage•Vertical •Submersible motor•Positive displacement•Nuclear•Specialty•

Available ConfigurationsSealed and sealless•Axially and radially split•Volute and diffuser•Close coupled and spacer coupled•Single and double case•

4

A Guide to Flowserve PumpsThe purpose of this publication is to provide a brief summary of the hundreds of pumps which comprise the Flowserve product line. Pump models are divided into five sections, beginning with overhung pumps and continuing through specialty designs. Each pump is identified by its formal designation and accompanied by a full-color cutaway illustration. Applicable engineering standards are listed along with performance characteristics and key features. The symbols shown at right are used to identify each pump’s primary market applications.

For more information about Flowserve pumps, visit: www.flowserve.com

Oil and Gas

Chemical

Power

Water Resources

Mining

Pulp and Paper

Primary Metals

General Industry

5

flowserve.com

Table of ContentsPump Selection Guide ...........................................6-7

Overhung Pumps

Product List ...........................................................9

Chemical Process .......................................... 10-15

API Process ................................................... 16-18

Slurry and Solids Handling ............................ 19-22

Industrial Process .......................................... 23-25

Between Bearings Pumps

Product List .........................................................27

Single Case - Axially Split - Single Stage ....... 28-29

Single Case - Axially Split - Multistage ................30

Single Case - Radially Split - Single Stage ...........31

Single Case - Radially Split - Multistage ........ 32-34

Double Case ................................................... 35-37

Vertical Pumps

Product List ............................................................39

Wet Pit ...............................................................40-41

Double Case .......................................................42-43

Submersible ............................................................44

Slurry and Solids Handling ................................45-47

Sump .................................................................48-49

Positive Displacement

Product List ............................................................51

Gear ........................................................................52

Screw ......................................................................53

Reciprocating ..........................................................54

Specialty Products

Product List ............................................................57

Nuclear Pumps and Seals ..................................58-61

Extreme Temperature Pumps ..................................62

Others ................................................................63-65

Additional Information

Introduction ............................................................67

Integrated Solutions Group ................................68-69

Other Flowserve Products .......................................70

Reference Sources ..................................................71

IndexProduct List .......................................................72-73

Oil and GasChemical Processing

Power Generation(Fossil, Renewables, Nuclear)

Power Generation(Fossil, Renewables,

Nuclear)Water Resources Primary Metals Mining Pulp and Paper General Industry

Downstream Upstream & Pipeline

Pump Category Sub-Category Di

still

atio

n

Hydr

otre

atin

g

Hydr

ocra

ckin

g

Cata

lytic

Cra

ckin

g

Resi

duum

and

Hea

vy O

il Up

grad

ing

Gas

Trea

ting

and

Sulfu

r Rec

over

y

LNG

NGL

and

LPG

Gas

to L

iqui

ds

Offs

ites

and

Was

te T

reat

men

t

Heav

y Oi

l, Oi

l San

ds a

nd S

hale

Crud

e, P

rodu

ct a

nd C

O 2 P

ipel

ine

Drill

ing

and

Prod

uctio

n

FPSO

Wat

er a

nd C

O 2 In

ject

ion

Wat

er S

uppl

y an

d Tr

eatm

ent

Acid

Tra

nsfe

r

Caus

tic a

nd C

hlor

-Alk

ali

Phar

mac

eutic

als

Poly

mer

s

Rene

wab

le F

uel P

rodu

ctio

n

Slur

ry P

roce

ssin

g

Solv

ents

Vola

tile

Orga

nic

Com

poun

ds

Was

te P

roce

ssin

g

Auxi

liary

Boile

r Fee

d

Boile

r Fee

d Bo

oste

r

Cond

ensa

te E

xtra

ctio

n

Cool

ing

Wat

er

Flue

Gas

Des

ulfu

rizat

ion

Geot

herm

al W

ell S

ervi

ces

Heat

Tra

nsfe

r Flu

ids

Mol

ten

Salt

Tran

sfer

Tran

sfor

mer

Coo

ling

Auxi

liary

Ser

vice

s

Nucl

ear S

ervi

ce

Desa

linat

ion

Floo

d Co

ntro

l

Grou

nd W

ater

Dev

elop

men

t and

Irrig

atio

n

Sew

age

Colle

ctio

n an

d Tr

eatm

ent

Wat

er S

uppl

y an

d Di

strib

utio

n

Wat

er T

reat

men

t

Cool

ing

Wat

er

Desc

alin

g

Hydr

aulic

Pre

ss

Plat

ing,

Gal

vani

zing

and

Othe

r Coa

tings

Scal

e Re

cycl

e

Dew

ater

ing

and

Wat

er S

uppl

y

Leac

hing

Aci

d

Prim

ary

Proc

essi

ng

Slur

ry T

rans

fer

Blea

ch C

hem

ical

Boile

r Fee

d

Chem

ical

and

Liq

uor

Coat

ings

Dige

ster

Pape

r Sto

ck

Show

er P

umps

Auto

mot

ive

Agric

ultu

re

Cons

truct

ion

Indu

stria

l Gas

es

Elec

troni

cs

Fire

Pro

tect

ion

Food

Pro

cess

ing

HVAC

OEM

Ship

ping

Snow

mak

ing

Overhung Chemical Process - ANSI, ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

API Process X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Industrial Process X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Slurry and Solids Handling X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Between Bearings

Single Case - Axially Split X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Single Case - Radially Split X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Double Case X X X X X X X X X X X X X X X X

Vertical Wet Pit X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Double Case X X X X X X X X X X X X X X X X X X X X X X X X

Deep Well Submersible Motor X X X X X X X X X X X X X X X X X X X X X X X X

Slurry and Solids Handling X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Sump X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Positive Displace-ment

Gear X X X X X X X X X X X X X X X X X X X X

Screw X X X X X X X X X X X X X X X X X X X

Multiphase X X

Reciprocating X X X X X X X X X X X X X X X X X X X X

Specialty Products

Nuclear Pumps X

Nuclear Seals X

Cryogenic Pumps X X X

Cryogenic Liquid Expander X

Geothermal Deepwell Submersible Pump

X

Hydraulic Decoking Systems X

Power Recovery - Hydroturbine X X X X X

Power Recovery - DWEER X

Thruster X X

CVP Concrete Volute Pumps X X X X X

Barge Pump X

Molten Salt VTP Pump X

Pump Selection Guide

flowserve.comOil and Gas

Chemical ProcessingPower Generation(Fossil, Renewables, Nuclear)

Power Generation(Fossil, Renewables,

Nuclear)Water Resources Primary Metals Mining Pulp and Paper General Industry

Downstream Upstream & Pipeline

Pump Category Sub-Category Di

still

atio

n

Hydr

otre

atin

g

Hydr

ocra

ckin

g

Cata

lytic

Cra

ckin

g

Resi

duum

and

Hea

vy O

il Up

grad

ing

Gas

Trea

ting

and

Sulfu

r Rec

over

y

LNG

NGL

and

LPG

Gas

to L

iqui

ds

Offs

ites

and

Was

te T

reat

men

t

Heav

y Oi

l, Oi

l San

ds a

nd S

hale

Crud

e, P

rodu

ct a

nd C

O 2 P

ipel

ine

Drill

ing

and

Prod

uctio

n

FPSO

Wat

er a

nd C

O 2 In

ject

ion

Wat

er S

uppl

y an

d Tr

eatm

ent

Acid

Tra

nsfe

r

Caus

tic a

nd C

hlor

-Alk

ali

Phar

mac

eutic

als

Poly

mer

s

Rene

wab

le F

uel P

rodu

ctio

n

Slur

ry P

roce

ssin

g

Solv

ents

Vola

tile

Orga

nic

Com

poun

ds

Was

te P

roce

ssin

g

Auxi

liary

Boile

r Fee

d

Boile

r Fee

d Bo

oste

r

Cond

ensa

te E

xtra

ctio

n

Cool

ing

Wat

er

Flue

Gas

Des

ulfu

rizat

ion

Geot

herm

al W

ell S

ervi

ces

Heat

Tra

nsfe

r Flu

ids

Mol

ten

Salt

Tran

sfer

Tran

sfor

mer

Coo

ling

Auxi

liary

Ser

vice

s

Nucl

ear S

ervi

ce

Desa

linat

ion

Floo

d Co

ntro

l

Grou

nd W

ater

Dev

elop

men

t and

Irrig

atio

n

Sew

age

Colle

ctio

n an

d Tr

eatm

ent

Wat

er S

uppl

y an

d Di

strib

utio

n

Wat

er T

reat

men

t

Cool

ing

Wat

er

Desc

alin

g

Hydr

aulic

Pre

ss

Plat

ing,

Gal

vani

zing

and

Othe

r Coa

tings

Scal

e Re

cycl

e

Dew

ater

ing

and

Wat

er S

uppl

y

Leac

hing

Aci

d

Prim

ary

Proc

essi

ng

Slur

ry T

rans

fer

Blea

ch C

hem

ical

Boile

r Fee

d

Chem

ical

and

Liq

uor

Coat

ings

Dige

ster

Pape

r Sto

ck

Show

er P

umps

Auto

mot

ive

Agric

ultu

re

Cons

truct

ion

Indu

stria

l Gas

es

Elec

troni

cs

Fire

Pro

tect

ion

Food

Pro

cess

ing

HVAC

OEM

Ship

ping

Snow

mak

ing

Overhung Chemical Process - ANSI, ISO X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

API Process X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Industrial Process X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Slurry and Solids Handling X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Between Bearings

Single Case - Axially Split X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Single Case - Radially Split X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Double Case X X X X X X X X X X X X X X X X

Vertical Wet Pit X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Double Case X X X X X X X X X X X X X X X X X X X X X X X X

Deep Well Submersible Motor X X X X X X X X X X X X X X X X X X X X X X X X

Slurry and Solids Handling X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Sump X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

Positive Displace-ment

Gear X X X X X X X X X X X X X X X X X X X X

Screw X X X X X X X X X X X X X X X X X X X

Multiphase X X

Reciprocating X X X X X X X X X X X X X X X X X X X X

Specialty Products

Nuclear Pumps X

Nuclear Seals X

Cryogenic Pumps X X X

Cryogenic Liquid Expander X

Geothermal Deepwell Submersible Pump

X

Hydraulic Decoking Systems X

Power Recovery - Hydroturbine X X X X X

Power Recovery - DWEER X

Thruster X X

CVP Concrete Volute Pumps X X X X X

Barge Pump X

Molten Salt VTP Pump X

flowserve.comOverhung Pumps

Chemical ProcessMark 3 ASME Standard 10Mark 3 Lo-Flo 10Mark 3 Unitized Self-Primer 10Mark 3 Recessed Impeller 11Mark 3 In-Line 11Guardian Magnetic Drive 11CPX3 ISO Standard 12CPX3 Self-Priming 12CPX3 Recessed Impeller 12CPX3 Close Coupled 13CPXV Chemical Sump 13CPXS Magnetic Drive 13PolyChem GRP 14PolyChem VGRP 14PolyChem S-Series 14PolyChem M-Series 15Polyshield 15Polybase 15

API ProcessHPX 16HPXM 16PHL 16ERPN 17PVXM 17HWMA 17PVML 18MSP 18DSVP 18

Slurry and Solids HandlingM 19R 19Titan Slurry 19LC 20MND 20MNR 20FRBH 21FRBHJC 21MPT 21MF 22MN 22MSX 22

Industrial ProcessD800 23MEN 23MENBLOC 23ME 24DS 24SMP 24SMX 25F-Line 25MVE 25

Overhung Pumps

9

10

Overhung – Chemical Process

Mark 3 Lo-Flo Mark 3 ASME Standard Mark 3 Unitized Self-Primer

Standards•ASME(ANSI)B73.1

Operating Parameters•Flowsto1680m3/h (7400 gpm) •Headsto215m(700ft)•Pressuresto27bar(400psi)•Temperaturesfrom-75°C(-100°F) to370°C(700°F)

Features •Exclusivereversevaneimpeller•StandardMark3Apowerend

– External micrometer impeller adjustment

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals– Constant level oiler – Large, reflective sight glass

•Choiceoflubricationsystems•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal® VBXX isolators – Magnetic drain plug

•SealSentry™sealchambers•Largest shaft and bearing components

in ANSI standard pumps •Optionalinducer

Related Configurations •Mark3Lo-Flo•Mark3UnitizedSelf-Primer•Mark3RecessedImpeller•Mark3Sealmaticdynamicallysealed

See Bulletin PS-10-13

StandardsASME (ANSI) B73.1•

Operating Parameters•Flowsto50m3/h (220 gpm) •Headsto300m(1000ft)•Pressuresto30bar(450psi)•Temperaturesfrom-75°C(-100°F) to370°C(700°F)

Features •Circular,concentriccasing•Radialvaneimpeller•StandardMark3Apowerend

– External micrometer impeller adjustment

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals– Constant level oiler – Large, reflective sight glass

•Choiceoflubricationsystems•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal VBXX isolators – Magnetic drain plug

•SealSentrysealchambers•Oversized shaft and bearing

components

See Bulletin PS-10-13

® Inpro/Seal is a registered trademark of Inpro/Seal Company.

Standards•Flowserve

Operating Parameters•Flowsto320m3/h (1400 gpm) •Headsto120m(400ft)•Pressuresto20bar(285psi)•Temperaturesto370°C(700°F)•Staticsuctionliftto6m(20ft)

Features •Unitizedcasingwithlargepriming

chamber, air separator and volute •Exclusivereversevaneimpeller

standard; open impeller optional •StandardMark3Apowerend

– External micrometer impeller adjustment

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals– Constant level oiler – Large, reflective sight glass

•Choiceoflubricationsystems•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal VBXX isolators – Magnetic drain plug

•SealSentrysealchambers•Oversizedshaftandbearing

components

See Bulletin PS-10-13

11

Overhung – Chemical Process

Mark 3 Recessed Impeller

Mark 3 In-Line Guardian Magnetic Drive

Standards•Flowserve

Operating Parameters•Flowsto455m3/h (2000 gpm) •Headsto120m(400ft)•Pressuresto20bar(285psi)•Temperaturesfrom-75°C(-100°F) to370°C(700°F)

Features •Lowshearvortexpumpingaction•Fractionalmediacontactwith the impeller•StandardCD4MCuNimpeller•Thick-wallwetendcomponents

suitable for light slurries•StandardMark3Apowerend

– External micrometer impeller adjustment

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals– Constant level oiler – Large, reflective sight glass

•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal VBXX isolators – Magnetic drain plug

•SealSentrysealchambers•Oversized shaft and bearing

Related Configurations •Mark3ASMEstandard•Mark3Sealmatic,recessedimpeller

See Bulletin PS-10-13

Standards•ASME(ANSI)B73.2

Operating Parameters•Flowsto370m3/h (1630 gpm) •Headsto230m(760ft)•Pressuresto24bar(350psi)•Temperaturesfrom-75°C(-100°F) to370°C(700°F)

Features•Exclusivereversevaneimpeller•StandardMark3Apowerend

– External micrometer impeller adjustment

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals •OptionalANSI3Apowerendwith

lifetime warranty– Certified clean room assembly – Inpro/Seal VBXX isolators

•SealSentrysealchambers•UniqueC-plusmotorandpumpshaft

alignment system•Choiceofbearinglubrication

– Regreasable bearings – Oil mist – Permanently lubricated bearings

Related Configurations •Mark3in-line,recessedimpeller

See Bulletin PS-10-15

Standards•ASME(ANSI)B73.1dimensions

Operating Parameters•Flowsto375m3/h (1650 gpm) •Headsto215m(700ft)•Pressuresto24bar(350psi)•Temperaturesfrom-75°C(-100°F) to290°C(550°F)

Features•Magneticdrivedesign•AlloyC-276containmentshell•Rareearthmagnets•LowNPSHR,reversevaneimpeller•Casingsandimpellersinterchangeable

with sealed configuration•Optimizedinternallubricationpath•Siliconcarbidebushingsandjournals

with double spiral grooves •Standardandcontainedbackpullout•Options

– Fiber-optic leak detection – Containment shell temperature

probes – Process temperature probes – External flush plans

Available Configurations•G-Series:-75°C(-100°F)to 120°C(250°F)

•H-Series:-120°C(-250°F)to 290°C(550°F)

See Bulletin P-10-14

12

Overhung – Chemical Process

CPX3 Self-Priming CPX3 Recessed Impeller

Standards•ISO2858•ISO5199

Operating ParametersFlows to 100 m• 3/h (440 gpm)Heads to 100 m (330 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-80°C(-110°F) •to350°C(660°F)

Features

One-piece casing with integral priming •chamber, air separator and voluteReflux priming principle eliminates •need for internal valves and external priming devicesHigh-efficiency, low NPHSr, precision •cast, semi-open impellerRun dry capability•SealSentry seal chambers•Accepts multiple seal arrangements•External micrometer impeller •adjustment mechanismStandard non-contacting labyrinth seal•Heavy-duty radial and thrust bearings•Back pullout design•CE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Other ConfigurationsCPX3 close coupled, self-priming•CPX3 magnetically driven, •self-primingCPX3 close coupled, magnetically •driven, self-priming

See Bulletin PS-10-30

Standards•ISO2858•ISO5199

Operating ParametersFlows to 750 m• 3/h (3300 gpm)Heads to 100 m (330 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-80°C(-110°F) •to350°C(660°F)

Features

Heavy-duty casing with integral foot •and multi-ribbed discharge flangeVortex action minimizes abrasive •wear and maintains solids integrityStandard high-efficiency, semi-open •impeller precision cast in CD4MCuN duplex stainless steelSealSentry seal chambers•Accepts multiple seal arrangements•External micrometer impeller •adjustment mechanismStandard non-contacting labyrinth seal•Heavy-duty radial and thrust bearings•One-piece, ductile iron bearing •housingBack pullout design•CE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Other ConfigurationsCPX3 recessed impeller, vertical sump •CPX3 close coupled, recessed impeller•

See Bulletin PS-10-30

CPX3 ISO Standard

Standards•ISO 2858•ISO 5199

Operating ParametersFlows to 1400 m• 3/h (6160 gpm)Heads to 220 m (720 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-80°C(-110°F) •to350°C(660°F)40 sizes with discharges from 20 mm •(0.75 in) to 200 mm (8 in)

Features

Heavy-duty casing with integral foot •and multi-ribbed discharge flangeReverse vane impeller standard; •open impeller availableSealSentry seal chambers•Accepts multiple seal arrangements•External micrometer impeller •adjustment mechanismStandard non-contacting labyrinth seal•Heavy-duty radial and thrust bearings•One-piece, ductile iron bearing •housingBack pullout design•CE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Related ConfigurationsCPX3 Self-Priming•C• PX3 Recessed ImpellerC• PX3 Close CoupledCPXV Chemical Sump•CPX3 centerline mounted•

See Bulletin PS-10-30

13

Overhung – Chemical Process

CPX3 Close Coupled CPXV Chemical Sump CPXS Magnetic Drive

Standards•ISO2858•ISO5199

Operating ParametersFlows to 750 m• 3/h (3300 gpm)Heads to 100 m (330 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-80°C(-110°F) •to350°C(660°F)

FeaturesCompact, space-saving configuration•Investment cast muff coupling•Heavy-duty casing with integral foot •and multi-ribbed discharge flangeRadiating surfaces•Reverse vane impeller standard; •open impeller availableSealSentry seal chambers•Accepts multiple seal arrangements•External micrometer impeller •adjustment mechanismAccepts standard electric motors•Standard non-contacting •labyrinth sealBack pullout design•CE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Other ConfigurationsCPX3 close coupled, recessed impeller•CPX3 close coupled, self-priming•CPX3 close coupled, magnetic drive•

See Bulletin PS-10-30

StandardsISO 2858•ISO 15783•

Operating ParametersFlows to 420 m• 3/h (1850 gpm)Heads to 160 m (525 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-40°C(-40°F) •to250°C(480°F)

FeaturesReinforced PEEK• ® or Alloy C-276 primary containment shellOptional Alloy C-276 secondary •containment shell High-performance rare earth magnets•Large inner magnet clearances•Optimized internal flow circulation path•Heavy-duty casing with integral foot •and multi-ribbed discharge flangeHigh-efficiency, low NPHSr, precision •cast, semi-open impellerAdvanced sintered silicon carbide •bushings and journal bearingsStandard and contained back •pullout designCE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Other ConfigurationsCPX3 close coupled, magnetic drive•CPX3 magnetically driven, •self-priming

See Bulletin PS-10-30

® PEEK is a registered trademark of Victrex plc Corp.

StandardsISO 13709/API 610, 8th & 10th ed.•ISO 5199•

Operating ParametersFlows to 1400 m• 3/h (6160 gpm)Heads to 250 m (820 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-40°C(-40°F) •to350°C(660°F)

FeaturesHeavy-duty casing with multi-ribbed •discharge flangeHigh-efficiency, semi-open impeller •Column lengths to 10 m (32 ft) •Heavy-duty thrust bearings with axial •adjustment above soleplate levelAccepts multiple seal arrangements•Elastomeric split element coupling•Options•

Recessed impeller −Suction strainer −Spacer coupling −Rectangular or circular soleplate −Oil lubrication to thrust bearing −Zone Ø hazardous area beneath −soleplate configuration

CE marked and compliant with •applicable European directives such as ATEX; available with GOST cert.

Other ConfigurationsCPX3 recessed impeller, •chemical sumpFully jacketed, molten salt design•

See Bulletin PS-10-30

14

Overhung – Chemical Process

PolyChem GRP Engineered Polymer Composite

PolyChem VGRP Engineered Polymer Composite Sump

PolyChem S-Series Fluoropolymer Lined

Standards•ASME(ANSI)B73.5 Operating Parameters•Flowsto2050m3/h (9000 gpm) •Headsto150m(500ft)•Pressuresto17bar(250psi)•Temperaturesfrom-45°C(-50°F) to120°C(250°F)

Features•Glassreinforcedvinylester•Unitizedcasingwithintegrally

molded, fully gusseted suction and discharge flanges

•Taperedpolygonimpellerdrive•Sealchamberaccommodatesmultiple

seals, glands and flush arrangements•StandardMark3Apowerend

– External micrometer impeller adjustment mechanism

– Double row angular contact out-board bearings and single row, deep groove inboard bearings

– Double lip oil seals– Constant level oiler

•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal VBXX isolators – Magnetic drain plug

Related Configurations•PolyChemVGRPengineeredpolymer composite sump •Self-primer

See Bulletin PS-10-17

Standards•Flowserve

Operating Parameters•Flowsto565m3/h (2500 gpm) •Headsto110m(350ft)•Pressuresto17bar(250psi)•Temperaturesfrom-30°C(-20°F) to90°C(200°F)

Features•Glassreinforcedvinylester•Unitizedcasingwithintegrally

molded, fully gusseted suction and discharge flanges

•Externallyadjustable,semi-openimpeller

•Shaftandbearingsystemoperateswell below the first critical speed

•Self-lubricatedorexternalflush bearings

•Single-piece,lightweight,filament-wound, reinforced fiberglass composite column

•Singleandduplexconfigurations•Fullbasketstrainer•NEMAin-linemotor•Fiberglassmountingplate•Taperedpolygonimpellerdrive•Pulloutbearingretainers•Levelcontrols•Choiceofshaftmetallurgy

Related Configurations•PolyChemGRPengineeredpolymer

composite

See Bulletin PS-10-17

Standards•ASME(ANSI)B73.1•ISO2858•JISdrilling

Operating Parameters•Flowsto420m3/h (1850 gpm) •Headsto145m(480ft)•Pressuresto17bar(250psi)•Temperaturesfrom-30°C(-20°F) to150°C(300°F)

Features •PFAlinedwetend•Metalarmormeetsmaterial

specifications of ASTM A395 and GGG 40.3

Enclosed impeller standard; open •impeller optional

•StandardMark3Apowerend•SealSentrysealchamber

accommodates multiple seal types •Shaftoptions

– Standard silicon carbide shaft sleeve– Alloy shaft sleeves – Solid shafts

•Bearinghousingoptions– Labyrinth oil seals – Oil slinger – Regreasable or double

shielded bearings – Oil mist lubrication

•OptionalANSI3Apowerendwith lifetime warranty

– Certified clean room assembly – Inpro/Seal VBXX isolators – Magnetic drain plug

See Bulletin PS-10-17

15

Overhung – Chemical Process

Polyshield Baseplate and Foundation System

Polybase Polymer Concrete Baseplate

Standards•Flowserve

Operating Parameters•Temperaturesto260°C(500°F)

Features•Combinesnon-metallicbaseplate

and formed concrete foundation for pump-driver in one complete unit

•Excellentcorrosionresistance•Improvedvibrationdampening•Reducedinstallationcostsandtime•Solidone-piecepolymermotor

mounting block with four 304 SS transverse motor block adjusters

•Self-ventingdesignwithgroutholeand plug

•Standard316stainlesssteelinserts•IntegralcatchbasinwithNPT connection•Uses200bar(3000psi)concrete•SuitablewithANSI,ISO,APIand

other foot-mounted and centerline mounted pumps

•Outstandingflatness•Options

– Choice of three polymer materials– Alloy 20 and Alloy C-276

inserts available– CPVC drain connection

See Bulletin PS-90-2

Standards•ANSIandISOstandarddesigns

Features•Solidpolymerconcreteconstruction•Lowinstalledcost•Superiorflatness•Enhancedvibrationdampening•Excellentcorrosionresistance•Outstandingresistancetotwisting

or diaphragming•8-point™adjusteralignmentsystem

Choice of three polymer materials••Options–Polybloc™motormountingblocks– Catch basin– Grout hole– Alternate equipment inserts

See Bulletin PS-10-13

PolyChem M-Series Fluoropolymer Lined, Magnetic Drive

Standards•ASME(ANSI)B73.1•ISO2858•JISdrilling

Operating Parameters•Flowsto135m3/h (600 gpm) •Headsto145m(480ft)•Pressuresto17bar(250psi)•Temperaturesfrom-30°C(-20°F) to150°C(300°F)

Features •PFA-linedwetend•Casingisductilecastironwith 3 mm (0.1 in) minimum PFA liner

thickness•PFA-linedfiberglasscontainmentshell•EnclosedPFA-linedimpeller•Rareearthmagnetsin synchronous drive•Metalarmormeetsmaterial

specifications of ASTM A395 and GGG40.3

•Separateinnermagnetandimpellercomponents

•Rotatingshaftdesign•Siliconcarbideradialandaxial thrust bearings •Choiceofbearinglubrication•Options

– Long and close coupled designs– ANSI 3A power end

See Bulletin PS-10-17

16

Overhung – API Process

Standards •ISO13709/API610(OH2),latested.

Operating Parameters•Flowsto2000m3/h (8800 gpm) •Headsto350m(1100ft)•Pressuresto80bar(1160psi)•Temperaturesfrom-160°C(-250°F) to450°C(840°F)

Features•Centerlinesupportedcasing•Nozzleloadingcapabilitybeyond ISO 13709/API 610 requirements•Dynamicallybalancedimpeller•Ruggedshaftdesign•ISO21049/API682sealchamber

accommodates multiple seal types•Choiceofbearings

– Standard single row, deep groove, radial bearing and duplex, single row 40°angularcontactthrustbearings

– Special bearing arrangements for high suction pressures

•Bearing lubrication and cooling options – Oil mist and oil purge– Fan cooling – Finned cooling insert

Related Configurations •HPXTcenterlinemounted,topsuction•HPXHcenterlinemounted,high

suction pressure•HPXSLcenterlinemounted,slurry•HPXINDcenterlinemounted,inducer•HPXCCcenterlinemounted,

coke crusher

See Bulletin PS-10-5

Standards •ISO13709/API610(OH2),latested.

Operating Parameters•Flowsto30m3/h (130 gpm) •Headsto280m(920ft)•Pressuresto80bar(1160psi)•Temperaturesfrom-160°C(-250°F) to450°C(840°F)

Features•Lowflow,highheaddesign•Replaceablevoluteinserts•High-efficiencypatenteddesignradial

blade impeller•FullinterchangeabilitywithHPXbear-

ing assembly and mechanical seals•Choiceofbearings

– Standard single row, deep groove, radial bearing and duplex, single row 40°angularcontactthrustbearings

– Special bearing arrangements for high suction pressures

ISO 21049/API 682 seal chamber •accommodates multiple seal types

•Bearinglubricationandcoolingoptions – Oil mist and oil purge – Fan cooling – Finned cooling insert

•Optionalinducer

Related Configurations •HPXcenterlinemounted

See Bulletin PSS-10-5.1

Standards •ISO13709/API610(OH2),latested.

Operating Parameters•Flowsto900m3/h (4000 gpm) •Headsto400m(1300ft)•Pressuresto40bar(600psi)•Temperaturesfrom-160°C(-250°F)to450°C(840°F)

•Motorsizesto110kW(150hp)

Features•Centerlinesupported,end

suction casing•Custom-tunedhydraulics•Multi-channeldiffusertechnology

Customized BEP fits −High efficiency −Extended MTBR −Low vibration −Low noise −

•Lowshaftdeflectionatanyflow•ISO21049/API682sealchamber

accommodates multiple seal types including dual pressurized, unpressurized and gas

•Bearinghousingcoolingoptions– Air fan – Water jacket

•ReplaceablediffusersAvailable boron diffusion •surface treatment

Other Configurations •Topsuctionnozzle

See Bulletin PSS-10-5.2

HPX (OH2) Centerline Mounted

HPXM (OH2) Centerline Mounted, Low Flow

PHL (OH2) Centerline Mounted

17

Overhung – API Process

Standards•Flowserve

Operating Parameters•Flowsto1100m3/h(4800gpm)•Headsto230m(750ft)•Pressuresto60bar(870psi)•Temperaturesto350°C(660°F)

Features •CriticalparametersmeetISO13709/API610(OH2)–Vibrationlimits–Deflectionlimitsatsealfaces–Nozzleloadingcapabilities–Balancinggrades

•ISO21049/API682sealchamberaccommodatesmultiplesealtypes

•Dynamicallybalanced,high-efficiencyimpeller

•Centerlinesupportedcasing•Doublevolutedesignfordischargeflanges80mm(3in)andlarger

•Renewablecasingandcoverwearrings

•Backpulloutdesign•Optionalinducer•ChoiceofAPImaterials

Related Configurations•ERPN-Osemi-openimpellerHighsuctionpressure:•35bar(500psi)

See Bulletin PS-10-20

StandardsISO13709/API610(OH3),latested.•

Operating ParametersFlowsto500m• 3/h(2200gpm)Headsto275m(900ft)•Pressuresto40bar(600psi)•Temperaturesfrom-100°C(-148°F)•to250°C(480°F)

Features Spacesavingdesign•Precisionmachineddiffusers•Customizablehydraulics–150BEP•hydraulicfitswith10casingsCasingandcoverdesignwith•metal-to-metalfitsandfullyconfinedcompressiongasketASME(ANSI)B16.5Class300•raisedfaceflangesDynamicallybalancedimpeller•OptimizedNPSHrduetosuction•boxdesignISO21049/API682sealchamber•Heavy-dutymotorsupportheadfits•NEMA,C-FaceandIECdrivers100%backpulloutdesign•Flexiblediscspacercoupling•Upperandlowerlabyrinthbearing•isolators;optionalradiallipsealsBearinglubricationoptions•Oilcascade−Oilmist−Greaselube−

Related Configurations•PVMLverticalin-line

See Bulletin PS-10-29

StandardsISO13709/API610(OH3),latested.•

Operating ParametersFlowsto45m• 3/h(200gpm)Headsto440m(1455ft)•Pressuresto60bar(870psi)•Temperaturesfrom-50°C(-58°F)to•260°C(500°F)

Features Spacesavingdesign•Low-flow,high-headhydraulics•Replaceablevoluteinserts•Customizablehydraulics–80BEPfits•inasinglepumpsizeCasingandcoverdesignwithmetal-•to-metalfitsandfullyconfinedcompressiongasketASME(ANSI)B16.5Class600raised•faceflanges;flatfaceoptionalPatentedradialbladeimpeller•OptionalinducerforlowNPSHr•ISO21049/API682sealchamber•Heavy-dutymotorsupportheadfits•NEMA,C-Face,P-baseandIECdrivers100%backpulloutdesign•Flexiblediscspacercoupling•Upperlabyrinthbearingisolator;•optionalradiallipsealsChoiceofbearinglubricationsystems•

Related ConfigurationsWMArigidlycoupled,verticalin-line•HWMA2twostage,verticalin-line•WMA2rigidlycoupled,twostage,•verticalin-line

See Bulletin PS-10-25

ERPN Centerline Mounted

PVXM (OH3) Vertical In-Line

HWMA (OH3)Vertical In-line, Low-Flow High-Head

18

Overhung – API Process

Standards•ISO13709/API610(OH5),latested.•BS4082R

Operating Parameters•Flowsto500m3/h (2200 gpm) •Headsto275m(900ft)•Pressuresto40bar(580psi)•Temperaturesfrom-100°C(-148°F) to250°C(480°F)

Features•Space-saving,alignment-freedesign•Custom-tunedhydraulics•State-of-the-artdiffusertechnology

Customized BEP fits −High efficiency −Extended MTBR −Low vibration −Low noise −

•ISO21049/API682sealchamberaccommodates multiple seal types

•Dynamicallybalancedimpeller•Positivelylocked,anti-rotation

impeller nut with threads unexposed to pumped fluid

Related Configurations •PVXMverticalin-line

See Bulletin PS-10-28

PVML (OH5)Vertical In-Line

Standards•Flowserve

Operating Parameters•Flowsto27m3/h (120 gpm) •Headsto900m(2955ft)•Pressuresto60bar(870psi)•Maximumsuctionpressureto 40 bar (580 psi) •Temperaturesfrom-40°C(-40°F) to350°C(660°F)•Speedsfrom2000rpmto8000rpm

Features•CloselyfollowsISO13709/API610

(OH4), latest edition•Modifiedconcentricvolute•Openimpellerwithbalanceholes

and scallops •Variablefrequencydrive•Rigidcoupling•Singleordualcartridge

mechanical seals •Options

– Inducer– Choice of materials

Available Configurations •Horizontalconfiguration•MSPverticalin-line,singlestage•MSP2verticalin-line,twostage

(opposed impellers)

See Bulletin PS-10-1

MSPVertical In-Line, Medium Speed

DSVP (OH4)Vertical In-Line

Standards•ISO13709/API610(OH4),latested.

Operating Parameters•Flowsto3400m3/h (15 000 gpm) •Headsto85m(275ft)•Pressuresto40bar(600psi)•Temperaturesto340°C(650°F)•Motorratingsto895kW(1200hp)

Features•Space-savingdesign•ISO21049/API682sealchamber

accommodates multiple seal types•Doublesuctionenclosedimpeller•Doublevolutecasedesign•Standardcasewearrings•Optionalimpellerwearrings•Metal-to-metalcasetocover

sealing with confined gasket •Rigidspacertypecoupling•Impellernutdesign,threaded

to tighten with rotation

19

Overhung – Slurry and Solids Handling

Standards•Flowserve

Operating Parameters•Flowsto10000m3/h (44 000 gpm) •Headsto90m(300ft)•Pressuresto10bar(150psi);

50 bar (725 psi) with the high pressure model

•Temperaturesto120°C(250°F)•Solidsfrom2%to70%byweight Features •One-piecehighchromeiron,

concentric casing with replaceable gland and suction side wear plates

•Closedimpellerwithpump-outvaneson front and rear shrouds

•Standardpacking-typestuffingboxwith replaceable wear plateFull and low flow flush connections•

•Heavy-dutybearingframe designed for V-belt loads

•Cartridgestylebearings•Parts interchangeable with R pump •Three-pointexternalend

clearance adjustment •Options

– Vortex semi-recessed impeller – Hard metal expeller – Mechanical seal housing

Related Configurations •Severe-dutymodel•High-pressuremodel•MJslurrysump•MJCcantileverslurrysump

See Bulletin PS-10-19

M Hard Metal, Abrasive Slurry

Standards•Flowserve

Operating Parameters•Flowsto10000m3/h (44 000 gpm) •Headsto50m(165ft)•Pressuresto10bar(150psi)

standard; 35 bar (510 psi) optional •Temperaturesto110°C(225°F)•Solidsfrom2%to70%byweight

Features•Concentric,castironcasingwith

replaceable, abrasion-resistant rubber liner

•Rubberlined,closedimpellerwithfront and rear pump-out vanes

•Standardpackingtypestuffingboxwith replaceable wear plate Full and low flow flush connections•

•Heavy-dutybearingframe•Three-point,externalendclearance

adjustment •Parts interchangeable with M pump •DirectlycoupledorV-beltdriven•Options

– Acid-resistant stuffing box kits– Hard metal expeller – Mechanical seal housing – Choice of liner materials

Related Configurations •RJrubberlined,slurrysump•RJCcantileverrubberlined, slurry sump

See Bulletin PS-10-18

R Radially Split, Rubber Lined Slurry

Standards•Flowserve

Operating Parameters•Flowsto3600m3/h (16 000 gpm) •Headsto90m(300ft)

Pressures to 40 bar (580 psi)•Sizes from 50 mm (2 in) •to 350 mm (14 in)

Features•Fullyinterchangeableelastomeric

or hard metal liners •Radiallysplitcasing•High-efficiency,closedimpeller•Amplesealchamberaccommodates

a variety of packing and seal types•Heavy-dutybearingframesized

to handle belt loads •Bearingcartridgewithback-to-back

angular contact thrust bearings •Rollertyperadialbearings•Contactlipseals•Dimensionallycompatiblewiththe

industry’s most widely used pumps•Optional expeller for dynamic sealing

Available Configurations Metal lined model•Rubber lined model•High-pressure model•

See Bulletin PS-10-8

Titan Slurry Heavy-Duty, Radially Split, Lined

20

Overhung – Slurry and Solids Handling

Standards•Flowserve

Operating Parameters•Flowsto17500m3/h (77 000 gpm) •Headsto40m(130ft)•Sizesfrom600mm(24in)to 1000 mm (40 in)

Features •One-piece,high-efficiencyimpeller with mixed flow vane design •Multiplematerialsofconstruction•Replaceablecasingwearring•Opposedtaperedrollerbearings

designed for a minimum B10 life of 100 000 hours•Productflushslurryseal•Externalendclearanceadjustment•Frontandbackpullout

Related Configurations•Verticalmounting•MNRrubberlinedabsorber

recirculation

See Bulletin PS-10-32

MNDHard Metal Absorber Recirculation

Standards•Flowserve

Operating Parameters•Flowsto8000m3/h (35 200 gpm)•Headsto90m(300ft)•Pressuresto25bar(360psi)•Temperaturesto140°C(285°F)•Specificgravitiesto1.7

Features•Concentriccasingwithtangential discharge•Rigid,one-piecebearingframe

with two angular contact outboard bearings and roller inboard bearings

•Largediameter,heavy-dutyshaft•Choiceofshaftsealingoptions – Wet gland packing

– Single or double mechanical seal– High-pressure double

mechanical seal– Special high solids seals – Alumina industry seal

•Choiceofmaterialsofconstruction•Multipleimpellerdesigns•Directcoupledorbeltdriven•Choiceofsixdrivearrangements•Options

– Inducer– Stuffing box cooling system

Related Configurations•PL-Ccantilever,chemical

slurry sump•LC-Slineshaft,chemical

slurry sump

See Bulletin PS-10-11

LCChemical Slurry

Standards•Flowserve

Operating Parameters•Flowsto17500m3/h (77 000 gpm) •Headsto40m(130ft)•Sizesfrom600mm(24in)to 1000 mm (40 in)

Features •One-piece,high-efficiencyimpeller

with mixed flow vane design •Removableone-pieceelastomeric

casing liner•Radiallysplitcasing•Multiplematerialsofconstruction•Replaceablecasingwearring•Opposedtaperedrollerbearings

designed for a minimum B10 life of 100 000 hours•Productflushslurryseal•Externalendclearanceadjustment•Frontandbackpullout

Related Configurations•Verticalmounting•MNDhardmetalabsorber

recirculation

See Bulletin PS-10-32

MNRRubber LinedAbsorber Recirculation

21

Overhung – Slurry and Solids Handling

Standards•Flowserve

Operating Parameters•Flowsto2700m3/h (12 000 gpm) •Headsto100m(330ft)•Temperaturesto150°C(300°F)•Speedsto1780rpm Features•Truestiffshaftcantileverdesign,

without bottom bearing or flushing water

•Steephead-capacity•Semi-open,fullvaneimpellerwith

back pump-out vanes •DirectcoupledorV-beltdriven•Extraheavy-dutyalloysteelshaft

Related Configurations•FRBHheavy-dutypaperstock

and process•FRBHJverticallineshaftsump

See Bulletin PS-10-16

Standards•Flowserve

Operating Parameters•Flowsto9085m3/h (40 000 gpm) •Headsto100m(330ft)•Pressuresto14bar(200psi)•Temperaturesto150°C(300°F) Features•Self-venting,topcenterline discharge casing •Semi-open,fullvaneimpellerwith

back pump-out vanes •Largesuctioninlet•Sealchamberacceptspackingor

mechanical seal•Three-pointendclearanceadjustment•Backpulloutdesign•Heavy-duty,oil-lubricatedbearings•Fullysplitinterlockingglands•Extraheavy-dutyalloysteelshaft•Contouredwearplatematch machined with impeller•Dryshaftconstructionwithsealed

impeller nut and stainless steel hook sleeve

•Rigid,one-piecebearingframe•Options

– Large conical seal housing– Inducer– Expeller– Recessed impeller

Related Configurations•FRBHJCcantileversump•FRBHJsump

See Bulletin PS-10-16

FRBHJCCantilever Sump

MPTSelf-Priming, Solids Handling

FRBHHeavy-Duty Paper Stock and Process

Standards•Flowserve

Operating ParametersFlows to 600 m• 3/h (2650 gpm)Heads to 35 m (115 ft)•Temperaturesto75°C(165°F)•Working pressures to 5 bar (72 psi)•Sizes 50 to 200 mm (2 to 8 in)•Solids to 75 mm (3 in) diameter•

Features•Two-vane,semi-open,solids

handling impeller•Externalimpelleradjustment•Abrasion-resistantdouble

mechanical seal•Quick-disconnectcoverplate•Heavy-duty,volutecasing•Replaceablesealhousing•Replaceableandreversible

wear plate•Solidone-pieceflapvalve•Backpulloutdesign•Multipledriveoptions•Extralargediametershaft

See Bulletin PS-10-9

22

Overhung – Slurry and Solids Handling

StandardsFlowserve•

Operating Parameters•Flowsto4545m3/h (20 000 gpm) •Headsto90m(300ft)Temperaturesto40°C(104°F)•

•Dischargesizesfrom80mm(3in) to 500 mm (20 in)

•Motorto224kW(300hp)•Solidshandlingto80mm(3in)

diameter spherical

Features •High-efficiencyhydraulics•EPACTratedmotor•Spike-resistantwindings•ClassHratedinsulationsystem•Dynamicallybalancedshaft and rotor •Mountingoptions

– Wet pit – Dry pit – Transportable

Available Configurations •MSXSeries1:Sizesfrom 75 mm (3 in) to 150 mm (6 in)•MSXSeries2/3:Sizesto 500 mm (20 in)

See Bulletin PS-50-2

MSXSolids Handling, Submersible

StandardsFlowserve•

Operating ParametersFlows to 45 500 m• 3/h (200 000 gpm) Heads to 90 m (300 ft) •

•Sizesto1800mm(72in)

Features•Varietyofnozzlepositionoptions•Direct or independent motor mounting•Minimalshaftdeflection•Oversizedshaftandreducedoverhang•Hardenedchromesteelwearrings•Sealchamberaccommodatespacking

or mechanical seals •Adjustablewearringclearance•Shaftsleeveoptions

– 316 stainless steel – Hardened chrome steel

•Bearinghousingfeatures– Tapered roller bearings – Integral jacking bolts for wear

ring adjustment– Accessible lubrication points

Available Configurations •MNhorizontal,endsuction•MNFvertical,bottomsuction,direct

connected motor •MNZvertical,bottomsuction,motor

on separate floor •MNCverticalwithbaseelbow,direct

connected motor •MNVverticalwithbaseelbow,motor

on separate floor (shown)

See Bulletin PS-10-4

MNLarge Capacity, Solids Handling

StandardsFlowserve•

Operating ParametersFlows to 2275 m• 3/h (10 000 gpm) Heads to 90 m (300 ft) •Sizes to 400 mm (16 in) •

Features•Varietyofnozzlepositionoptions•Directorindependentmotormounting•Minimalshaftdeflection•Oversizedshaftandreducedoverhang•Hardenedchromesteelwearrings•Sealchamberaccommodatespacking

or mechanical sealsAdjustable impeller clearance•

•Shaftsleeveoptions– 316 stainless steel – Hardened chrome steel

•Bearinghousingfeatures– Ball or tapered roller bearings – Integral jacking bolts for wear ring adjustment – Accessible lubrication points

Available Configurations •MFhorizontal,endsuction•MFVverticalwithmotoron separate floor (shown)•MFCverticalwithdirectconnected

motor

See Bulletin PS-10-3

MFSolids Handling

23

Overhung – Industrial Process

StandardsFlowserve•

Operating ParametersFlows to 340 m• 3/h (1500 gpm)

•Headsto120m(395ft)•Pressuresto15bar(220psi)•Temperaturesto120°C(250°F)

Features High-efficiency closed impeller•Centerline discharge•Sealed-for-life, pre-lubricated motor •bearings with two-year minimum lifeRenewable wear rings and shaft •sleeves Pre-set mechanical seal assembly •Bell type mechanical seal cover•Standard NEMA C-face motor •Back pullout design •Threaded and flanged connections •

Available Configurations Type D-814 frame mounted •Type D-824 close coupled •Type D-834 vertical in-line •

See Bulletin PS-10-6

Standards•DIN24255•EN733•Flowserve

Operating ParametersFlows to 800 m• 3/h (3520 gpm)Heads to 140 m (450 ft)•

•Pressuresto16bar(230psi)•Temperaturesto120°C(250°F)

Features•33sizesavailable•Volutecasingwithtopdischarge•Dynamicallybalanced,precisioncast

closed impeller with extended hub and machined shroud

•Balancingchamberandimpellerbalance holes minimize axial thrust

•Opensealchamberwithintegralvortex breaking ribs

•Oversizedstainlesssteelshaft•Oversizedbearings•Standardcasewearrings•Backpulloutdesign

Related ConfigurationsMEN-SP vertical cantilever sump•MHP high-pressure•MENBLOC close coupled•ME horizontal high capacity•MEV vertical high capacity •

See Bulletin PS-10-2

StandardsDIN 24255•EN 733•Flowserve•

Operating ParametersFlows to 340 m• 3/h (1500 gpm)Heads to 100 m (330 ft)•Pressures to 16 bar (230 psi)•Temperaturesto110°C(230°F)•

FeaturesCompact, space-saving configuration•End suction, top discharge, •volute casingPrecision cast and dynamically •balanced high-efficiency, closed impeller with extended hubImpeller balance chamber and holes •for reduced thrustOpen seal chamber with integral •vortex breaking ribsOversized stainless steel shaft•Oversized bearings•Standard case wear rings•Back pullout design•Baseplate and coupling not required•CE marked in Europe•

Related ConfigurationsMEN horizontal end suction•MEN-SP vertical cantilever sump•MHP high-pressure •ME horizontal high capacity•MEV vertical high capacity•

See Bulletin PS-10-2

D800 SeriesCast Iron

MENEnd Suction

MENBLOCClose Coupled

24

Overhung – Industrial Process

Standards•Flowserve

Operating ParametersFlows to 5700 m• 3/h (25 000 gpm)Heads to 110 m (350 ft)•Pressures to 27 bar (400 psi)•Temperaturesto120°C(250°F)•

FeaturesDouble volute, end suction casing •with centerline dischargeMechanically balanced, radial flow •impellerImpeller balance holes minimize •axial thrustSeal chamber accommodates packing •and multiple mechanical seal typesBack pullout design•Angular contact thrust bearing and •parallel roller radial bearing Grease lubrication standard; oil •lubrication optionalChoice of materials – from cast iron •to super duplex

Related ConfigurationsDSV vertical •Directional discharge •(90°ontherightorontheleft)Centerline mounted•

Standards•Flowserve

Operating Parameters•Flowsto135m3/h (600 gpm)•Headsto70m(220ft)•Pressuresto12bar(175psi)•Temperaturesfrom-40°C(-40°F) to120°C(250°F)

Features•Glassreinforcedpolymer,high-

efficiency, semi-open or closed impellers standard

•IndustrystandardNEMAmotors•Stainlesssteel,self-aligned mechanical seal•Backpulloutdesign•Clamp-typemountingplate•Options

– Cast iron, bronze or 316 stainless steel impellers

– Stub shaft design

Related Configurations•SMXnon-metallic,standard

motor pump•VSMPvertical,standard

motor pump

See Bulletin PS-10-26

SMPStandard Motor

DSDouble Volute, End Suction

MEEnd Suction

Standards•Flowserve

Operating ParametersFlows to 3000 m• 3/h (13 200 gpm)Heads to 90 m (295 ft)•Pressures from 4 to 16 bar •(58 to 232 psi)Temperaturesto120°C(250°F)•

FeaturesSingle volute, end suction casing •with tangential dischargeBack pullout design•Radial flow impeller shrouded, •keyed on shaft Impeller balance holes minimize •axial thrustBearings•

Radial ball bearing and roller −bearings (depending on size)Sealed for life for lower frames, −rationalized with MEN sizesGrease lubricated for higher frames −

Related ConfigurationsMEV vertical, end suction•MEN horizontal, end suction •(low capacity)MHP horizontal, end suction •(low capacity, high-pressure)DS horizontal, end suction •(high capacity)

25

Overhung – Industrial Process

Standards•Flowserve

Operating Parameters•Flowsto500m3/h (2200 gpm)•Headsto250m(820ft)•Dischargepressuresto25bar (365 psi)•Temperaturesto105°C(220°F)

Features•Modulardesign

– 8 sizes– 15 hydraulics– 2 impeller types

•To9stages,dependingonmodel and operating speed•Sleevedshaftundersealingsystem•CastironEN-GJL250pressure casings•CastironEN-GJL250orNORyL®

impellers, depending upon model•SteelgradeC35Eshaft•13%chromiumsteelsleeve

Available Configurations•FPhorizontal,overhungimpeller•FMhorizontal,closecoupled•FDvertical

FS vertical, suspended shaft wet-pit••FMDvertical,closecoupled

FAD vertical, rigid coupled •

® NORyL is a registered trademark of General Electric Company

F-LineEnd Suction, Multistage

Standards•Flowserve

Operating Parameters•Flowsto25m3/h (100 gpm)•Headsto20m(60ft)•Pressuresto12bar(175psi)•Temperaturesto80°C(180°F)

Features•Polyphenylenesulfide(PPS)casing,

adapter and impeller •StandardNEMA56Jframe

C-faced motor•Stainlesssteel,self-aligned mechanical seal•Backpulloutdesign•40mm(1.5in)portsizeforhose connection

Related Configurations•SMPstandardmotorpump•VSMPverticalstandardmotorpump

See Bulletin PS-10-26

SMXNon-Metallic Standard Motor

MVEEnd Suction

Standards•Flowserve

Operating ParametersFlows to 2700 m• 3/h (11 890 gpm)Heads to 15 m (50 ft)•Pressures to 7 bar (100 psi)•Temperaturesto100°C(212°F)•

FeaturesSingle volute casing with end •suction and side discharge; top discharge optionalMechanically balanced, mixed •flow impellerSeal chamber accommodates packing •and multiple mechanical seal typesBack pullout design•Standard angular contact radial and •thrust bearingsStandard grease lubrication; oil •lubrication optionalChoice of materials •

Cast iron −Ni-Resist − ®

Bronze −Super duplex stainless steel −

® N-Resist is a registered trademark of the International Nickel Co., Inc.

Between Bearings Pum

ps

Between Bearings Pumps

Single Case - Axially Split - Single StageLR 28LNN 28DVSH 28LPN 29

Single Case - Axially Split - MultistageEC 30UZDL 30DMX 30

Single Case - Radially Split - Single StageHDX 31HDX-TT 31DVSR 31

Single Case - Radially Split - MultistageHED 32HED-DS 32WTB 32WD 33WDX 33NM 33WX 33CS 34WXH 34

Double CaseWXB 35WXB-B 35WNC 35CSB 35CHTA 36HDB 36HSB 36BP 36WCC 37HDO 37HSO 37WIK 37WIKO 37

27

Between Bearings Pum

ps

Overhung – General Industry

28

Between Bearings – Single Case - Axially Split - Single Stage

28

LRAxially Split, Single Stage

Standards•Flowserve

Operating Parameters•Flowsto2000m3/h (8800 gpm) •Headsto170m(560ft)•Pressuresto21bar(300psi)•Temperaturesfrom-30°C(-20°F) to150°C(300°F)

Features •Splitcasedesignwithliftinglugs•LowNPSHencloseddouble

suction impeller •Flatorraisedfacesuctionand

discharge flanges to ANSI, DIN and ISO standards

•Oilorgreaselubricatedradialandthrust bearings – Single row, deep groove ball bear-

ings or duplex thrust ball bearings– 100 000 hours typical L10 bearing life

•Sealchamberaccommodates multiple seal types

•Standardcasewearrings;optional serrated groove designs

•Optionalimpellerwearrings•Availablehighperformancecoatings

Related Configurations •LRVvertical,axiallysplit,

single stage•LLRaxiallysplit,twostage

See Bulletin PS-20-3

LNNAxially Split, Single Stage

Standards•Flowserve

Operating ParametersFlows to 30 000 m• 3/h (132 000 gpm)Heads to 300 m (980 ft)•Pressures to 40 bar (580 psi)•Temperaturesto140°C(285°F)•

FeaturesHeavy-duty, double volute casing •with side suction and side dischargeFlanges to ANSI, DIN and •ISO standardsHydraulically balanced, double •suction impellerOptimum axial and radial •thrust balanceStandard casing wear rings; optional •impeller wear ringsSeal chamber accommodates packing •and multiple mechanical seal types360°supportedbearinghousing•Choice of bearings•

Standard ball radial and ball thrust −Optional double row, angular −contact thrust bearingsOptional sleeve bearings −

Grease lubrication standard; oil mist •and bath optionalChoice of materials•

Related Configurations LNNV vertical, single stage•LNNC single stage, bottom suction•LNE, LNS, LNST and LNGT axially •split, single stage

See Bulletin PS-20-1

DVSH (BB1) Axially Split, Single Stage

StandardsISO 13709/API 610 (BB1), latest ed.•

Operating ParametersFlows to 12 000 m• 3/h (52 835 gpm) Heads to 565 m (1854 ft)•Pressures to 150 bar (2175 psi) •Temperaturesto200°C(400°F)•Speeds to 6000 rpm•

Features•Doublevolutecasing•Hydraulicallybalanceddouble

suction impeller •ISO21049/API682sealchambers

accommodates multiple seal types •Stiffshaftdesign•Baseplatedesignsandpump

packages engineered to contract requirements

•Choiceofbearings– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust Choice of materials •

Carbon steel −12% chrome −Austenitic stainless steels −Duplex stainless steels −

See Bulletin PS-20-2

Overhung – General Industry

29

Between Bearings – Single Case - Axially Split - Single Stage

29

LPN (BB1)Axially Split, Double Suction, Single Stage

StandardsISO 13709/API 610 (BB1), latest ed.•

Operating ParametersFlows to 15 000 m• 3/h (65 000 gpm)Heads to 250 m (820 ft)•Pressures to 25 bar (365 psi); 50 bar •(725 psi) with LPN-H modelTemperaturesfrom-80°C(-110°F) •to150°C(400°F)

FeaturesDouble volute, near-centerline •supported casingASME (ANSI) B16.5 Class 150 or •Class 300 raised face flanges Confined gasket design•Hydraulically balanced double •suction impellerISO 21049/API 682 seal chambers•Baseplate designs and pump •packages engineered to contractHeavy-duty,bracketed,180° •supported carbon steel bearing housingStandard non-contacting labyrinth seals•Choice of bearings•

Ball radial and ball thrust with oil −flinger systemSplit leeve radial and ball thrust −with ring oil systemSplit sleeve radial and tilting pad −thrust with pressure lubrication

Other ConfigurationsLPN-H high-pressure, double suction•LPN-V vertical in-line•

See Bulletin PS-20-5

Overhung – General Industry

3030

Between Bearings – Single Case - Axially Split - M

ultistage

UZDL (BB1) Axially Split, Two Stage

StandardsISO 13709/API 610 (BB1), latest ed.•

Operating ParametersFlows to 2950 m• 3/h (13 000 gpm) Heads to 685 m (2250 ft) •Pressures to 64 bar (910 psi) •Temperaturesto200°C(400°F)•Speeds to 2000 rpm •

Features•Doublevolutehydraulicpassages•ISO21049/API682sealchambers•Shaftoptions

– Double extension for connection to auxiliary pumps or hydraulic turbines– Special shaft end machining for

hydraulic fitted couplings•Baseplatedesignsandpump

packages engineered to contract•DynamicbalancingandTIR

verifications on assembled rotors •Choiceofbearings

– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust – Tilting pad radial and tilting

pad thrust •Choiceofmaterials

– Carbon steel – 12% chrome – Austenitic stainless steels

Duplex stainless steels −– Monel®

See Bulletin PS-30-2

® Monel is a registered trademark of International Nickel Co.

ECAxially Split, Multistage

StandardsFlowserve•

Operating Parameters Flows to 2340 m• 3/h (10 300 gpm)Heads to 650 m (2130 ft)•Pressures to 88 bar (1300 psi)•Temperaturesfrom-30°C(-20°F) •to150°C(300°F)

FeaturesHorizontally split case with integral •mounting feetIn-line mounted impellers•Rotating assembly balanced as a unit•Case wear rings standard at •impeller eyeDiaphragm rings standard at impeller •back shroudShaft protected by interstage sleeves •and packing sleevesSeal chambers can accommodate •packing or mechanical sealsDouble row anti-friction radial and •thrust bearingsGrease lubrication•

DMX (BB3) Axially Split, Multistage

StandardsISO 13709/API 610 (BB1), latest ed.•

Operating ParametersFlows to 2950 m• 3/h (13 000 gpm) Heads to 2130 m (7000 ft) •Pressures to 275 bar (4000 psi) •Temperaturesto200°C(400°F)•Speeds to 6000 rpm•

Features•Doublevolutehydraulicpassages

Renewable case and impeller •wear rings

•ISO21049/API682sealchambersAxially split center bushing •

•Shaftoptions– Double extension for connection

to auxiliary pumps or hydraulic turbines

– Special shaft end machining for hydraulic fitted couplings

Interstage take-off option••Baseplatedesignsandpump

packages engineered to contract•DynamicbalancingandTIR

verifications on assembled rotors •Choiceofbearings

– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust Choice of bearing lubrication systems•Choice of bearing cooling systems •

•Choiceofmaterials

See Bulletin PS-30-3

Overhung – General Industry

3131

Between Bearings – Single Case - Radially Split - Single Stage

HDX (BB2)Radially Split, Double Suction

HDX-TT (BB2) Radially Split, Power Recovery Turbine

DVSRRadially Split, Volute Casing, Single Stage

StandardsISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 4100 m• 3/h (18 000 gpm) Heads to 450 m (1500 ft) •Pressures to 42 bar (610 psi); •100 bar (1450 psi) with HDX-H modelTemperaturesto450°C(850°F)•

Features•Double-volute,centerlinesupported,

self-venting casing •ASME(ANSI)B16.5Class300

flanges; optional Class 600 and 900 flanges

•Dynamicallybalanced,double suction impeller•Stiffshaftdesign•ISO21049/API682sealchambers•Standarddual,single-row,back-to-

back mounted, angular contact type thrust bearing

•Bearingoptions– Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust– Lubrication systems available

•360°supportedbearinghousing•Doublecasecovers

Related Configurations•HDX-Hhigh-pressure,radiallysplit,

double suction•In-linesidenozzles•Same-sidenozzles(90°rotated)

See Bulletin PS-20-4

StandardsISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 4100 m• 3/h (18 000 gpm) Heads to 760 m (2500 ft) •Pressures to 100 bar (1450 psi)•Temperaturesto450°C(850°F)•

Features•Doublevolute,centerlinesupported,

self-venting casing with diffuser •ASME(ANSI)B16.5Class300

flanges; optional Class 600 and 900 flanges

•Dynamicallybalanced,double suction, radial inflow turbine runner •Stiffshaftdesign•ISO21049/API682sealchambers•Standarddual,single-row,back-to-

back mounted, angular contact type thrust bearing

•Bearingoptions– Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust– Lubrication systems available

•360°supportedbearinghousing•Doublecasecovers

Other ConfigurationsHigh-pressure•

•In-linesidenozzles•Side-sidenozzles(90°rotated)

StandardsISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 3635 m• 3/h (16 000 gpm)Heads to 250 m (820 ft)•Pressures to 260 bar (3750 psi)•Temperaturesto200°C(400°F)•Speeds to 4000 rpm•

FeaturesDouble volute casing•Hydraulically balanced double •suction impellerStaggered vane impellers•Stiff shaft design•IS0 21049/API 682 seal chambers•Baseplate designs and pump packages •engineered to contractChoice of bearings•

Sleeve radial and ball thrust −Sleeve radial and tilting pad thrust −Tilting pad radial and tilting −pad thrust

Choice of materials•Carbon steel −12% chrome −

Overhung – General Industry

3232

Between Bearings – Single Case - Radially Split - M

ultistage

HED (BB2) Radially Split, Two Stage

HED-DS (BB2) Radially Split, Double Suction, Two Stage

WTB (BB2)Radially Split, Double Suction, Three Stage

Standards ISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 1000 m• 3/h (4400 gpm) Heads to 650 m (2100 ft) •Pressures to 120 bar (1750 psi) •Temperaturesto450°C(850°F)•

Features•Heavy-duty,doublevolutecasing with180°staggeredvolutes

•Top-topnozzleconfiguration•ISO13709/API682sealchambers•Dynamic balancing and TIR

verifications on assembled rotating element

•Baseplate designs and pump packages engineered to contract

•Choiceofbearings– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust

•Choiceofmaterials– Carbon steel – 12% chrome

Austenitic stainless steel −Duplex stainless steel −Monel lining −

Other ConfigurationsHED-DS radially split, double suction, •two stageIn-line side nozzles•Same-side nozzles•High-pressure•

See Bulletin PS-30-4

StandardsISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 2000 m• 3/h (8800 gpm) Heads to 750 m (2460 ft) •Pressures to 120 bar (1750 psi) •Temperaturesto450°C(850°F)•

Features•Doublesuctionfirststageimpeller•Heavy-duty,doublevolutecasing with180°staggeredvolutes

•Top-topnozzleconfiguration•ISO13709/API682sealchambers•Dynamic balancing and TIR

verifications on assembled rotating element

•Baseplatedesignsandpump packages engineered to contract

•Choiceofbearings– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust

•Choiceofmaterials– Carbon steel – 12% chrome

Austenitic stainless steel −Duplex stainless steel −Monel lining −

Other Configurations•HEDradiallysplit,twostage

In-line side nozzles•Same-side nozzles•High-pressure•

See Bulletin PS-30-4

StandardsISO 13709/API 610 (BB2), latest ed.•

Operating ParametersFlows to 1400 m• 3/h (6165 gpm)Heads to 1100 m (3610 ft)•Pressures to 108 bar (1565 psi)•Temperaturesto430°C(800°F)•Speeds to 3600 rpm•

Features•MeetsintentofkeyISO/API

requirementsHeavy-duty, centerline supported, dual •volute casing with integral crossoverASME (ANSI) B16.5 Class 300 flanges; •Class 600 and 900 flanges optionalDynamically balanced, double suction •first stage impeller; single suction on smallest three-stage onlyBalance holes on second and third •stage impellersIS0 21049/API 682 seal chambers•360°supported,carbonsteel •bearing housingChoice of bearings•

Sleeve radial and ball thrust −Sleeve radial and tilting pad thrust −Dual, single row, angular contact −anti-friction thrust bearings installed back-to-back and single row, deep groove anti-friction radial bearing

Available ConfigurationsWTB three stage, double suction•WTB two stage, single suction•WTB two stage, double suction•

See Bulletin PS-30-14

Overhung – General Industry

3333

Between Bearings – Single Case - Radially Split - M

ultistageWX Radially Split, Multistage, Ring Section

StandardsFlowserve •

Operating ParametersFlows to 300 m• 3/h (1320 gpm)Heads to 1200 m (3940 ft)•Pressures to 150 bar (2175 psi)•Temperaturefrom-50°C(-58°F)to•200°C(400°F)

FeaturesSeparate cast diffusers and •channel ringsCenterline mounted, self-venting •casingTop/top nozzles •Interstage O-ring seals•Individual impeller balance•Precision fit rotor•Optional inducer for low NPSHr•

WD and WDX Radially Split, Multistage, Ring Section

NM Radially Split, Multistage, Ring Section

Standards•Flowserve Operating Parameters•Flowsto190m3/h (800 gpm) •Headsto700m(2300ft)•Pressuresto75bar(1090psi)•Temperaturesto210°C(410°F)

Features•Multivanediffusers•Identicalradially-splitring section sets•O-ringinterstagesealing

arrangement •Deep-grooveballbearingdesign•Angularcontact,doublerow thrust bearing •360°machineregisteredbearing

housing fits •Dynamicallybalanced,precision

machined enclosed impellers•Packingormechanicalsealing•Options

– Multiple flange orientations– End suction design with product

lubricated sleeve bearing– Radial suction design with product

lubricated sleeve bearing – Inducer

Standards•Flowserve

Operating ParametersFlows to 3 000 m• 3/h (13 210 gpm)Heads to 500 m (1640 ft)•Pressures to 60 bar (870 psi) •Temperaturesto140°C(285°F)•

Features•Modulardesign

– 15 sizes– 22 hydraulicsLow NPSH suction volute design •Machined impeller shrouds for •increased efficiencyImpeller balance holes minimize •axial thrustShrouded diffusers with return guide •vanes minimize radial thrustRemovable seal housings •accommodate gland packing and mechanical sealsStandard cast iron construction; •high alloy construction available

Other ConfigurationsNMV vertical, multistage ring section •NMD vertical, multistage ring section •NM-S vertical, suspended shaft •wet pitNMAD vertical, rigid shaft coupling•

Overhung – General Industry

3434

Between Bearings – Single Case - Radially Split - M

ultistage

CS Radially Split, Multistage, Ring Section

Standards•Flowserve

Operating ParametersFlows to 450 m• 3/h (1980 gpm) Heads to 1250 m (4110 ft) •Pressures to 125 bar (1800 psi) •Temperaturesfrom-30°C(-20°F) •to120°C(248°F)

FeaturesSeparate cast diffusers and •channel ringsSecondary O-ring seals•Complete radial balance•Press fit stationary wear parts •Balance disc wear indicator •Disc balancing device•Centerline or foot mounted casing•Optional nozzle orientation •Choice of bearings•– Ball radial and thrust – Sleeve radial and ball thrust – Sleeve radial and tilting pad thrust

WXH Radially Split, Multistage, High Pressure, Ring Section

Standards•Flowserve

Operating Parameters•Flowsto900m3/h (4000 gpm) •Headsto2650m(8700ft)•Pressuresto250bar(3625psi)•Temperaturesto250°C(480°F)

Features•Castsuctionanddischargeheads with integral nozzles•Singleordoublesuctionfirststage

impeller designs•Investmentcastdiffusersand return

channel hydraulic passages•CompressiontypeinterstageO-ring•Separate,highstrengthsub-base•Replaceablestationarywearparts

mounted in the diffusers •Standardflangedbalancedrumwith

serrated running clearances; optional straight balance drum

•Sealchamberacceptssingle, double and tandem mechanical seals

•Largediametershaftwithstaggered impeller and balancing device keyways

•Nopre-warmingrequired•Chromesteelnozzles•Choiceofbearings

Ball radial and thrust −Sleeve radial and ball thrust −Sleeve radial and tilting pad thrust −

See Bulletin PS-30-1

Overhung – General Industry

3535

Between Bearings – Double Case

WXB and WXB-B Diffuser Casing, Multistage, Process Barrel

StandardsASME Section VIII•

Operating ParametersFlows to 300 m• 3/h (1320 gpm)Heads to 1200 m (3940 ft) •Pressures to 150 bar (2175 psi) •Temperaturesto200°C(390°F)•

Features•Diffusercaseconstruction•Removeablecartridgetype

inner case sub-assembly•Largeeyefirststageimpeller

Low flow high head Barske impeller •on WXB-B

•Patentedbalancingdevice•Sleevemounteddeepgrooveradial

and back-to-back mounted angular contact bearings

•High-capacity,antifrictiontype thrust bearing •Bearinglubricationsystemwith

oil bath, constant level oiler and sight glass

•Renewablecasingandimpellerrings•Highshaftdiameter/bearingspanratio•Options

– Hydrodynamic sleeve type radial bearings

– Thrust bearing cooling system (air)– Labyrinth type end seals

Available ConfigurationsWXB: standard hydraulics•

•WXB-B:lowflow,highheadhydraulics

See Bulletins PS-30-6 and PSS-30-6.1

WNCDiffuser Casing, Multistage, Utility Barrel

StandardsASME Section VIII•

Operating ParametersFlows to 1400 m• 3/h (6200 gpm) Pressures to 350 bar (5075 psi) •

•Temperaturesto200°C(390°F) Features•Diffusercaseconstruction•Shearringdesign•High-strengthforgedsteelbarrel;

alloy barrels available•Removablecartridgetype

inner case sub-assembly•Shearringbarrelclosingsystem•Singleordoublesuctionfirst

stage impeller •Standardantifrictionorsleevetype

radial bearings•High-capacityantifrictiontype

thrust bearing; tilting pad thrust bearing available

•Renewablecasingrings•Straightbalancedrumforgedfrom

hardened stainless steel •Chromeplatedshaftingunder

journal bearings •Groundforgedsteelshafting

Related Configurations•WNC-HPhigh-pressure,diffuser

casing, multistage, utility barrel

See Bulletin PS-30-12

CSB Diffuser Casing, Multistage, Utility Barrel

StandardsASME Section VIII•

Operating ParametersFlows to 1500 m• 3/h (6600 gpm) Discharge pressures to 300 bar •(4350 psi)

•Temperaturesto250°C(480°F)•Speedsto8000rpm

Features•Internalcasingwithsegmented

stage elements•Diffuser-guidevaneconstruction•Precisioncastin-lineimpellersof

high-quality chrome steel •Heavy-dutybarrelwithforgedsteel discharge cover •Fullyenclosedorshroudedprecision

cast diffusers on high-energy applications

•Tiltpadthrustandtri-land radial bearings

•Renewablecasingringsandsleeves•Flangedbalancedrumforgedfrom

hardened stainless steel; straight drum optional

•Chromeplatedshaftingunder journal bearings

•Groundforgedsteelshafting

See Bulletin PS-30-12

Overhung – General Industry

3636

Between Bearings – Double Case

HDB and HSB Volute Casing, Multistage, Utility Barrel

BP (BB5) Diffuser Casing, Multistage, Process Barrel

StandardsASME Section VIII•

Operating ParametersFlows to 4000 m• 3/h (17 600 gpm)Heads to 4300 m (14 000 ft) •Discharge pressures to 450 bar •(6525 psi) Temperaturesto425°C(800°F)•Speeds to 9000 rpm•

Features•Axiallysplitinnercasing•Dualvolute design with symmetrical

upper and lower halves•Opposedimpellers•Heavy-dutyforgedsteelbarrel

and discharge cover•Individuallymountedandsecured

impellers •DynamicbalancingandTIR

verifications on assembled rotor •Onefullpressuresealingto

atmosphere and one full pressure sealing to suction

•Minimalpressurebreakdowns across running clearances

•Sleeveradialandtiltingpad thrust bearings

•Baseplatedesignsandpump packages engineered to contract requirements

See Bulletin PS-30-12

StandardsISO 13709/API 610 (BB5), latest ed.•

Operating ParametersFlows to 1050 m• 3/h (4620 gpm)Heads to 3500 m (11 480 ft)•Discharge pressures to 295 bar •(4260 psi)Temperaturesto425°C(800°F)•Speeds to 6000 rpm•

FeaturesDiffuser, guide-vane style inner casing •with segmented stage elementsInner casing bolted head at one end•Heavy-duty barrel with forged steel •discharge coverMulti-vane diffuser and channel •ring designPrecision cast diffusers•Precision cast keyed impellers; •optional shrink fit impellers for high- speed or high-temperature serviceSingle or double suction first stage •impellerStraight style balance drum•Forged shaft; optional stepped •shaft for high speed or high- temperature serviceChoice of bearings •

Ball radial and ball thrust with oil −flinger lubrication systemSleeve radial and tilting pad −thrust bearings with pressure lubrication system

See Bulletin PS-30-11

CHTA Diffuser Casing, Multistage, Utility Barrel

Standards•ASMESectionVIII

Operating ParametersFlows to 5250 m• 3/h (23 000 gpm) Heads to 4300 m (14 000 ft)•Discharge pressures to 450 bar •(6525 psi) Temperaturesto250°C(480°F)•Speeds to 6000 rpm•

FeaturesInternal casing with segmented •stage elementsDiffuser-guide vane construction•Precision cast in-line impellers •of high-quality chrome steel Heavy-duty barrel with forged steel •discharge cover Fully enclosed or shrouded •precision cast diffusers on high- energy applications Balance drum and sleeve made from •hardened stainless steel forgingsTilt pad thrust and tri-land •radial bearings Serrated running fits •Renewable casing rings and sleeves •Flanged balance drum design •Chrome plated shafting under •journal bearings Ground forged steel shafting•

See Bulletin PS-30-12

Overhung – General Industry

3737

Between Bearings – Double Case

HDO and HSO (BB5)Volute Casing, Multistage, Process Barrel

StandardsISO 13709/API 610 (BB5), latest ed.•

Operating ParametersFlows to 4000 m• 3/h (17 600 gpm)Heads to 5365 m (16 000 ft) •Discharge pressures to 450 bar •(6525 psi)

•Temperaturesto425°C(800°F)•Speedsto9000rpm

Features•Dualvolute,axiallysplitinnercasing

with opposed grouped impellers •Heavy-dutybarrelwithforgedsteel

discharge cover •Symmetricalupperandlower

half inner volutes •Individuallymountedandsecured

impellers •DynamicbalancingandTIR

verifications on assembled rotor•Onefullpressuresealing

to atmosphere and one full pressure sealing to suction

•Sleeveradialandtiltingpad thrust bearings

•Baseplatedesignsandpump packages engineered to contract requirements

Other Configurations Coke crusher (for most sizes)•

See Bulletin PS-30-8

WCC (BB5) Diffuser Casing, Multistage, Process Barrel

StandardsISO 13709/API 610 (BB5), latest ed.•

Operating ParametersFlows to 1000 m• 3/h (4400 gpm)Heads to 2800 m (9200 ft)•Discharge pressures to 275 bar •(3987 psi)Temperaturesto425°C(800°F)•Speeds to 3580 rpm; 6000 rpm •with high-speed option

Features•Internalcasingwithsegmented stage elements•Diffuser-guidevaneconstruction•Multi-vanediffuser-channel

ring collectors•Precisioncastchromesteelin-line

impellers•Singlesuctionordoublesuction

first stage impeller •Heavy-dutybarrelwith

discharge cover •Removablecartridgetype

inner case sub-assembly •Straight or flanged balance drum

with serrated running surfaces •Tilt pad thrust and heavy-duty

journal bearings •Force feed lubricated bearings•Precision-ground forged

steel shafting

See Bulletin PS-30-7

WIK and WIKO (BB5) Diffuser Casing, Multistage, Process Barrel

StandardsISO 13709/API 610 (BB5), latest ed.•

Operating Parameters

Flows to 4000 m• 3/h (17 610 gpm)Heads to 7000 m (23 000 ft) •Discharge pressures to 650 bar •(9425 psi) Temperaturesto450°C(840°F)•Speeds to 13 000 rpm•

FeaturesRadially split inner casings •Multi-vane diffuser and channel •ring designTandem or imposed impellers•

•Innercasingwithaboltedhead at one end – Optional cartridge element design – Optional shear ring designHeavy-duty forged steel barrel casing •and discharge head Precision cast and milled diffusers•Precision cast impellers•Shrink fit and double-keyed impellers•Straight style balance drum •Tilt pad thrust and sleeve •radial bearingsLarge diameter shaft stepped at each •impeller and balance drum NEMA taper shaft extension •

Available Configurations WIK: tandem impellers•WIKO: opposed impellers•Coke crusher (for most sizes)•

See Bulletin PS-30-9

Vertical Pumps

39

Vertical Pumps Wet Pit WUJ 40VTP 40QL 40QLQ 40VCT 41AFV 41CVP 41

Double CaseQLC 42QLQC 42VPC 42WUC 42APKD 43

Submersible Pleuger SUBM 44Byron Jackson SUBM 44MSX 44

Slurry and Solids HandlingMVX 45MFV 45MNV 45FRBHJC 46MJ 46MJC 46RJ 46RJC 46Terra-Titan 47MSX 47Drain-Titan 47

SumpCPXV Chemical Sump 48ESP3 Chemical Sump 48PolyChem VGRP 48Drain-Titan 49VSMP 49ECPJ 49

40

Vertical – Wet Pit

40

QL and QLQ Vertical, Double Suction, Twin Volute

Standards•Flowserve

ASME Sections VIII and IX•

Operating Parameters•Flowsto25000m3/h (110 000 gpm) •Headsto500m(1640ft)•Pressuresto70bar(1015psi)•Temperaturesto200°C(400°F)•Columnsizesto1500mm(48in)

Features •Heavy-wall,twin-volutecasing•Doublesuction(firststage)impeller•Openlineshaftstandard;enclosed

lineshaft optional•Heavy-dutydischargehead•Sealedforlifebottombearing•Options

– ISO 13709/API 610 (VS2), latest ed., and Directive 94/9/EC (ATEX 100) compliant configurations

– Vertical solid shaft or hollow shaft motors with thrust bearing – Oiler and solenoid switch for pump bearing lubrication – Water, grease or oil lubricant – Lubrication lines for bottom bearing– Antifriction (self-lubricated) or tilting

pad axial thrust bearing assembly – Rigid, adjustable spacer coupling

Available Configurations •QLsinglestage•QLQmultistage•QLCdoublecase,singlestage•QLQCdoublecase,multistage

See Bulletin PS-40-4

VTP Vertical Turbine

WUJ (VS1) Vertical Lineshaft, Multistage

Standards•Flowserve

Operating Parameters•Flowsto13600m3/h (60 000 gpm) •Headsto700m(2300ft)•Pressuresto100bar(1450psi)•Temperaturesfrom-45°C(-50°F) to300°C(570°F)•Sizesfrom150mm(6in)

to 1375 mm (55 in) •Settingsto365m(1200ft)

Features•Above-orbelow-gradedischarge•Enclosedorsemi-openimpellers•Openorenclosedlineshaft

construction•Productorenclosedoillubrication•Flangedorthreadedcolumnpipe•High-pressurestuffingbox•Rigid,adjustablecoupling•Driveoptions

– Hollow shaft or solid shaft motor– Dry or submersible electric motors– Variable speed drives– Engine with right angle gear– Steam turbine

•Options– Thrust balanced impeller – O-ring bowl– Adjustable flanged coupling

Related Configurations •VTPmoltensaltdesign•VPCverticalturbine,doublecase

See Bulletin PS-40-7

Standards•ISO13709/API610(VS1),latested.•ASMESectionsVIIIandIX•Directive94/9/EC(ATEX100)

Operating Parameters•Flowsto3000m3/h (13 200 gpm) •Headsto2000m(6560ft)•Pressuresto200bar(2900psi)•Temperaturesfrom-200°C(-328°F) to350°C(660°F)

Features•Radialormixedflowhydraulics•Multivanediffuserdesign•Optionalaxialthrusttiltingpad bearing configuration •Stiffshaftdesign•ISO21049/API682sealchamber

accommodates multiple seal types•Flangedspacertypecoupling•Screen-type,non-sparking

coupling guard •Casingandimpellerwearrings•Centerlinealignedandflanged

columns •Reinforcedmotorstand•Optionalinducer

Related Configurations •WUC(VS6)doublecase, multistage See Bulletin PS-40-8

41

Vertical – Wet Pit

41

AFV Vertical, Axial Flow

CVP Vertical, Concrete Volute

Standards•Flowserve

Operating Parameters•Flowsto181700m3/h

(800 000 gpm) •Headsto11m(35ft)•Speedsto1770rpm•Sizesfrom200mm(8in)

to 3.1 m (123 in) •Settingsto8m(25ft)

FeaturesThree- or four-vane axial flow design •Cast or fabricated bowl assembly •Flanged outer column pipe with •integral bearing bracket Oil, fresh water or self lubricating •lineshaft construction Fabricated discharge with mitered •elbow Above- or below-ground discharge •Multiple drive options •

Solid or hollow shaft motor −Steam turbine −Diesel engine −

Options •Casing liners −Integral axial thrust bearing −assembly

See Bulletin PS-40-3

Standards•HydraulicInstitute•AWWA

Operating Parameters•Flowsto181700m3/h

(800 000 gpm) •Headsto110m(350ft)•Sizesfrom1200mm(48in)to 3380 mm (133 in)

Features•Five-miteredelbowdischargehead

with above- or below-grade discharge•Pulloutornon-pulloutconstruction

Flanged outer column with integral •bearing bracket

•Enclosedorsemi-openimpellers•Oil,freshwaterorself-lubricating column construction•Sealchamberacceptspackingor mechanical seal•Three-piecerigid,adjustable

motor coupling •Shaftsleevesunderthebearingsand

seal chamber•Options

– Discharge head with integral axial thrust bearing assembly

– Cast or fabricated bowl assembly– Integrated suction bell bearing

bracket– Multiple stages– Thrust collar– Sand cap

•Engineeredtocustomerspecifications

See Bulletin PS-40-6

VCT Vertical, Mixed Flow

Standards•Flowserve

Hydraulic Institute•

Operating Parameters•Flowsto115000m3/h (500 000 gpm) •Headsto45m(147ft)

Features•Verticaldry-pitdesign

Removable metallic pump pullout •unit within a concrete volute

•Suction bell connected to preformed high efficiency, vortex-free concrete suction box

•Open mixed flow and closed mixed flow impeller optionsDry shaft design•No submerged bearings•

•Bearings and sealing systems easily accessible •Prefabricated concrete segments •Highly corrosion and erosion resistant•Liquidyne® or mechanical shaft seal •Inflatable static seal

Engineered to customer specifications•

Available ConfigurationsBSV open mixed flow impeller design•BCV closed mixed flow impeller design•

See Bulletin PS-40-1

® Liquidyne is a registered trademark of IHC

4242

Vertical – Double Case

QLC and QLQC Vertical Double Case, Double Suction, Twin Volute

Standards•Flowserve

ASME Sections VIII and IX•

Operating Parameters•Flowsto25000m3/h (110 000 gpm) •Headsto500m(1640ft)•Pressuresto70bar(1015psi)•Temperaturesfrom-45°C(-50°F) to200°C(400°F)

Features •Doublecaseconstruction•Heavy-walltwin-volutecasing•Doublesuction(firststage)impeller•Openlineshaftconstruction•Sealchamberaccommodates

cartridge style single, dual unpressurized and dual pressurized mechanical seals

•Heavy-dutydischargehead•Options

ISO 13709/API 610 (VS7), latest −ed., compliant designsDirective 94/9/EC (ATEX 100) −availableVertical solid shaft or hollow shaft −motors with thrust bearingAntifriction (self-lubricated) or tilting −pad axial thrust bearing assembly

– Rigid, adjustable spacer coupling

Available Configurations •QLCdoublecase,singlestage•QLQCdoublecase,multistage•QLsinglestage•QLQmultistage

See Bulletin PS-40-4

WUC (VS6) Vertical, Double Case, Multistage

Standards•ISO13709/API610(VS6),latested.•ASMESectionsVIIIandIX•GermanPressureVessel

Association (AD) •BritishStandardBS5500•CompliancewithPressure

Equipment Directive 97/23/EC

Operating Parameters•Flowsto3000m3/h (13 200 gpm) •Headsto2000m(6560ft)•Pressuresto200bar(2900psi)•Temperaturesfrom-200°C(-328°F) to350°C(660°F)

Features•Radialormixedflowhydraulics•Lowsuction-velocitycandesign•Optionalaxialthrusttiltingpad

bearing configuration •Stiffshaftdesign•ISO21049/API682sealchamber

accommodates multiple seal types•Flangedspacertypecoupling•Screen-type,non-sparking

coupling guard •Insidedrainline•Casingandimpellerwearrings•Reinforcedmotorstand•Optionalinducer

Related Configurations •WUJ(VS1)verticallineshaft,

multistage•WUC-LNGcryogenic(VS6)double

case, multistage

See Bulletin PS-40-9

VPC Vertical Turbine, Double Case

Standards•ASMESectionsVIIIandIX•HydraulicInstitute•AWWA

Operating Parameters•Flowsto13600m3/h (60 000 gpm) •Headsto1070m(3500ft)•Pressuresto100bar(1450psi)•Temperaturesfrom-45°C(-50°F) to230°C(450°F)

Features•Diffuserdesign•Above-orbelow-gradedischarge

ASME Class 150 or 300 slip-on flanges••Singleormultistagedesigns•Enclosedorsemi-openimpellers•Largeeyefirststageimpeller•Productoroilbearinglubrication•Flangedcolumnpipe•High-pressurestuffingbox•Rigid,adjustableflangedcoupling•Driveoptions

– Hollow shaft or solid shaft motor– Variable speed drive– Engine with right angle gear– Steam turbine

•Otheroptions– Integral axial thrust bearing

assembly – O-ring construction– Keyed impellers– Bowl and impeller wear rings

Related Configurations •VTPverticalturbine

See Bulletin PS-40-7

4343

Vertical – Double CaseAPKDVertical, Double Case, Double Suction

StandardsFlowserve•

Operating ParametersFlows to 4600 m• 3/h (20 200 gpm)Heads to 500 m (1640 ft)•Pressures to 50 bar (725 psi) •Temperaturesfrom-45°C(-50°F) •to95°C(200°F)Speeds to 1800 rpm•

FeaturesDouble suction first stage impeller•Double case construction•Impellers keyed with lock collars•Twin-volute casing•Heavy-duty discharge head•Open lineshaft construction•Flanged column assembly with •bearing retainersLarge shaft with keyed lineshaft •couplingsMechanically sealed•Rigid, adjustable flanged coupling•Solid shaft motor with NEMA or IEC •thrust bearingOptional suction can drain•

Related Configurations APKC single suction design•

4444

Vertical – Submersible

Pleuger SUBM Deep-Well Submersible (Water-Filled Design)

Byron Jackson SUBMDeep-Well Submersible(Oil-Filled Design)

Standards•Flowserve•CSA,WIMES3.03,EMV,KTV,CE, VDE and other certifications

Operating Parameters•Flowsto4500m3/h (19 800 gpm) •Headsto800m(2625ft)•Motorsizesto5000kW(6700hp)•Speedsfrom200to3600rpm

Features•Wettypemotorswithwatertight

insulated windings •Dynamicallybalancedimpellers•Prefilledmotorswithfoodgrade additives •Heavy-duty,adjustable,self-aligning

thrust bearings •Frictionweldedshafts•Non-toxicClassYwindinginsulation

for potable water services •Variablefrequencydriveandhigh- temperature options •Choiceofmaterials

– Cast iron – Bronze – Austenitic stainless steels

Duplex stainless steels −– Reinforced composite

Related Configurations •ByronJacksonSUBMdeep-well submersible (oil-filled design)

See Bulletin PS-50-3

Standards•Flowserve•NSFStandard61Certification•Certificationprogramaccreditedby

RvA, Dutch Council for Accreditation

Operating Parameters•Flowsto4500m3/h (19 800 gpm) •Headsto800m(2625ft)•Motorsizesto1500kW(2000hp)•Speedsfrom1000to3600rpm

Features•Oil-filledmotorswithself-contained

force feed, filtered, cooled oil circulation system •Vacuumpressureimpregnated(VPI)

epoxy, class F insulation system •Double-actingthrustbearingsystem•Dynamicallybalanced,heavy-duty, high-efficiency impellers •Variablefrequencydriveandhigh- temperature options •Choiceofmaterials

– Cast iron – Bronze – Austenitic stainless steels

Duplex stainless steels −– Reinforced composite

•Choiceofseals– Mercury seal – Double mechanical seal – Single, pressurized mechanical seal

Related Configurations •PleugerSUBMdeep-well submersible (water-filled design)

See Bulletin PS-50-3

StandardsFlowserve•

Operating Parameters•Flowsto4545m3/h (20 000 gpm) •Headsto90m(300ft)Temperaturesto40°C(104°F)•

•Dischargesizesfrom80mm(3in) to 500 mm (20 in)

•Motorto224kW(300hp)•Solidshandlingto80mm(3in)

diameter spherical

Features •High-efficiencyhydraulics•EPACTratedmotor•Spike-resistantwindings•ClassHratedinsulationsystem•Dynamicallybalancedshaft and rotor •Mountingoptions

– Wet pit – Dry pit – Transportable

Available Configurations •MSXSeries1:Sizesfrom 75 mm (3 in) to 150 mm (6 in)•MSXSeries2/3:Sizesto 500 mm (20 in)

See Bulletin PS-50-2

MSXSolids Handling, Submersible

4545

Vertical – Slurry and Solids HandlingMVXSolids Handling, Wet Pit

MFVSolids Handling

MNVLarge Capacity,Solids Handling

Standards•Flowserve

Operating Parameters•Flowsto2275m3/h (10 000 gpm) •Headsto90m(300ft)•Sizesto400mm(16in)

Features•Varietyofnozzlepositionoptions•Directorindependentmotormounting•Minimalshaftdeflection•Oversizedshaftandreducedoverhang•Hardenedchromesteelwearrings•Sealchamberaccommodatespacking

or mechanical sealsAdjustable impeller clearance•

•Shaftsleeveoptions– 316 stainless steel – Hardened chrome steel

•Bearinghousingfeatures– Ball or tapered roller bearings – Integral jacking bolts for wear

ring adjustment – Accessible lubrication points

Available Configurations •MFhorizontal,endsuction•MFVverticalwithmotoron separate floor (shown)•MFCverticalwithdirectconnected

motor

See Bulletin PS-10-3

Standards•Flowserve

Operating Parameters•Flowsto45500m3/h (200 000 gpm) •Headsto90m(300ft)•Sizesto1800mm(72in)

Features•Varietyofnozzlepositionoptions•Directorindependentmotormounting•Minimalshaftdeflection•Oversizedshaftandreducedoverhang•Hardenedchromesteelwearrings•Sealchamberaccommodatespacking

or mechanical seals •Adjustablewearringclearance•Shaftsleeveoptions

– 316 stainless steel – Hardened chrome steel

•Bearinghousingfeatures– Tapered roller bearings – Integral jacking bolts for wear ring adjustment – Accessible lubrication points

Available Configurations •MNhorizontal,endsuction•MNFvertical,bottomsuction,

direct connected motor •MNZvertical,bottomsuction,

motor on separate floor •MNCverticalwithbaseelbow,

direct connected motor •MNVverticalwithbaseelbow,

motor on separate floor (shown)

See Bulletin PS-10-4

Standards•Flowserve

Operating Parameters•Flowsto17000m3/h (75 000 gpm) •Headsto40m(130ft)•Sizes250mm(10in)to1200mm

(48 in) •Driversto950kW(1250hp)•Solidsupto150mm(6in)

Features•Heavy-dutyfabricateddischarge

head designed with fabricated flange and splitter vane

•Symmetricalbowlwithmulti- volute design

•Hydraulicallybalanceddesign•Enclosednon-clogimpeller•Enclosedlineshaft•Splittervaneinthecolumnand discharge head •Mechanicalsealorsoftpackingshaft

sealing options •Holloworsolidshaftmotorstyle•416stainlesssteellineshafts•Separatesteelsoleplate•Bronzelineshaftbearings•Suctionbell•Standardsuctionbellwearrings•Optionalimpellerwearrings

See Bulletin PS-40-5

4646

Vertical – Slurry and Solids Handling

FRBHJC Cantilever Sump

MJ and MJCHard Metal, Slurry Sump

RJ and RJCRubber Lined, Slurry Sump

Standards•Flowserve

Operating Parameters •Flowsto2700m3/h (12 000 gpm) •Headsto100m(330ft)•Temperaturesto150°C(300°F)•Speedsto1780rpm Features•Truestiffshaftcantileverdesign,

without bottom bearing or flushing water

•Steepheadcapacity•Semi-open,fullvaneimpellerwith

back pump-out vanes •DirectcoupledorV-beltdriven•Extraheavy-dutyalloysteelshaft

Related Configurations •FRBHheavy-dutypaperstock

and process•FRBHJverticallineshaftsump

See Bulletin PS-10-16

Standards•Flowserve

Operating Parameters•Flowsto225m3/h (1000 gpm) •Headsto30m(100ft)•Pressuresto10bar(150psi)•Temperaturesto110°C(225°F)•Solidsfrom2%to70%byweight•Speedsto1780rpm Features •Abrasion-andcorrosion-resistant

high chrome iron concentric casing •Integrallycaststraighteningvanes

in the suction nozzle •Closedimpellerwithpump-outvanes

on front and rear shrouds •MJhasflutedcutlassrubber bearings •MJChasrestrictionbushing•DirectlycoupledorV-beltdriven•Options

– Hard metal expeller – Open and recessed impellers – Choice of materials

Available Configurations •MJsubmergedbearingand

lineshaft design•MJCcantileverdesign•Mhorizontal,hardmetal

abrasive slurry

See Bulletin PS-10-19

Standards•Flowserve

Operating Parameters•Flowsto225m3/h (1000 gpm) •Headsto30m(100ft)•Pressuresto10bar(150psi)•Temperaturesto110°C(225°F),

depending on material •Solidsfrom2%to70%byweight•Speedsto1780rpm

Features •Radiallysplitcasingwithanti-

prerotation vanes in suction nozzle•Casinglinerspressuremolded

on steel backing plates; multiple materials available

•Pressuremoldedrubberclosed impeller with pump-out vanes on front and rear shrouds

•RJhasflutedcutlassrubber bearings •RJChasrestrictionbushing•DirectlycoupledorV-beltdriven•Options

– Hard metal expeller – Choice of liner materials

Available Configurations •RJsubmergedbearingand

lineshaft design•RJCcantileverdesign•Rhorizontallysplit,rubber

lined slurry

See Bulletin PS-10-18

4747

Vertical – Slurry and Solids HandlingTerra-Titan Cantilever Sump

Standards•Flowserve

Operating Parameters •Flowsto250m3/h (1100 gpm) •Headsto45m(150ft)•Pressuresto5bar(70psi)•Temperaturesto100°C(212°F)•Sizesfrom40mm(1.5in)

to 125 mm (5.0 in) •Sumpdepthsfrom700mm

(28 in) to 1800 mm (72 in)

Features•One-piecesuspended,oversized

cantilever shaft construction•Interchangeableurethaneorhard

metal wetted parts •Concentriccasingdesign•Doublesuction,hydraulically

balanced open impeller •Externalimpelleradjustment•RenewableTerrapreneurethane

shaft sleeve •Greasedforlife,heavy-duty,

self-aligning roller bearings•Upperandlowerstrainers•Run-drycapability•ANSIandISOconfigurations•Portable•Liftinglugs•Rigidmotormountpivotbar•Availablebottomsuctiontailpipe•Multipledriveoptions

See Bulletin PS-10-7

Drain-Titan Urethane Lined, Double Suction Sump

Standards•Flowserve

Operating Parameters •Flowsto160m3/h (700 gpm) •Headsto40m(130ft)•Pressuresto4bar(55psi)•Sizesfrom40mm(1.5in)

to 100 mm (4 in)•Solidsto15mm(0.5in)

Features•Doublesuction,urethanecoated wet-end •Robust,integralunitconstruction•Largediameter,stiffcantilever

drive shaft •Nosubmergedbearingsorseals•Double-sidedimpellerwith

pre-set clearance•Keyedandboredshaftcoupling•Standardsinglelipoilseal•Urethanelined,slottedoutlet

pipe flange•Greaselubricated,singlerow,

deep groove ball bearings•Noprimingrequired•Run-drycapability

See Bulletin PS-10-7

StandardsFlowserve•

Operating Parameters•Flowsto4545m3/h (20 000 gpm) •Headsto90m(300ft)Temperaturesto40°C(104°F)•

•Dischargesizesfrom80mm(3in) to 500 mm (20 in)

•Motorto224kW(300hp)•Solidshandlingto80mm(3in)

diameter spherical

Features •High-efficiencyhydraulics•EPACTratedmotor•Spike-resistantwindings•ClassHratedinsulationsystem•Dynamicallybalancedshaft and rotor •Mountingoptions

– Wet pit – Dry pit – Transportable

Available Configurations •MSXSeries1:Sizesfrom 75 mm (3 in) to 150 mm (6 in)•MSXSeries2/3:Sizesto 500 mm (20 in)

See Bulletin PS-50-2

MSXSolids Handling, Submersible

4848

Vertical – Sump

ESP3Chemical Sump

Standards•Flowserve

Operating Parameters•Flowsto1365m3/h (6000 gpm) •Headsto90m(300ft)•Pressuresto12bar(175psi)•Temperaturesto180°C(350°F)

Features •Optimizedlineshaftbearingdesign to ISO 13709/API 610 spacing

requirements•Doublerowexternalthrustbearings•Singleandduplexconfigurations•Flangeddischarge•Largebasketstrainer•IndustrystandardTCVmotors•Lubricationoptions

– Product lube for clear liquids – Dual particle separator for

light solids – Grease lubrication

•Mountingplatesealingoptions– Vapor tight – Vapor proof – Pressurized design

•Options– Upper stuffing box – Sealing ring – Suction tailpipes – Level controls

Related Configurations •ESP3Lo-Flo•ESP3recessedimpeller•ESP3highchromeiron

See Bulletin PS-10-24

PolyChem VGRP Engineered Polymer Composite Sump

Standards•Flowserve

Operating Parameters •Flowsto565m3/h (2500 gpm) •Headsto110m(350ft)•Pressuresto17bar(250psi)•Temperaturesfrom-30°C(-20°F) to90°C(200°F)

Features•Glassreinforcedvinylester•Unitizedcasingwithintegrally

molded, fully gusseted suction and discharge flanges

•Externallyadjustable,semi- open impeller

•Shaftandbearingsystemoperateswell below the first critical speed

•Self-lubricatedorexternal flush bearings•Single-piece,lightweight,filament-

wound, reinforced fiberglass composite column

•Singleandduplexconfigurations•Fullbasketstrainer•NEMAin-linemotor•Fiberglassmountingplate•Taperedpolygonimpellerdrive•Pulloutbearingretainers•Levelcontrols•Choiceofshaftmetallurgy

Related Configurations •PolyChemGRPengineered

polymer composite

See Bulletin PS-10-17

CPXVChemical Sump

StandardsISO 13709/API 610, 8th & 10th ed.•ISO 5199•

Operating ParametersFlows to 1400 m• 3/h (6160 gpm)Heads to 250 m (820 ft)•Pressures to 25 bar (365 psi)•Temperaturesfrom-40°C(-40°F) •to350°C(660°F)

FeaturesHeavy-duty casing with multi-ribbed •discharge flangeHigh-efficiency, semi-open impeller •Column lengths to 10 m (32 ft) •Heavy-duty thrust bearings with axial •adjustment above soleplate levelAccepts multiple seal arrangements•Elastomeric split element coupling•Options•

Recessed impeller −Suction strainer −Spacer coupling −Rectangular or circular soleplate −Oil lubrication to thrust bearing −Zone Ø hazardous area beneath −soleplate configuration

CE marked and compliant with •applicable European directives such as ATEX; available with GOST certification

Other ConfigurationsCPXVR recessed impeller, •chemical sumpFully jacketed, molten salt design•

See Bulletin PS-10-30

4949

Vertical – Sump

Drain-TitanUrethane Lined, Double Suction Sump

Standards•Flowserve

Operating Parameters •Flowsto160m3/h (700 gpm) •Headsto40m(130ft)•Pressuresto4bar(55psi)•Sizesfrom40mm(1.5in)

to 100 mm (4 in)•Solidsto15mm(0.5in)

Features•Doublesuction,urethanecoated wet-end •Robust,integralunitconstruction•Largediameter,stiffcantilever

drive shaft •Nosubmergedbearingsorseals•Double-sidedimpellerwith

pre-set clearance•Keyedandboredshaftcoupling•Standardsinglelipoilseal•Urethanelined,slottedoutlet

pipe flange•Greaselubricated,singlerow,

deep groove ball bearings•Noprimingrequired•Run-drycapability

See Bulletin PS-10-7

VSMPVertical Standard Motor

ECPJ (VS4)Sump

Standards•Flowserve

Operating Parameters•Flowsto135m3/h (600 gpm)•Headsto70m(220ft)•Pressuresto12bar(175psi)•Temperaturesfrom-40°C(-40°F) to120°C(250°F)

Features•Glassreinforcedpolymer,high- efficiency, semi-open or closed

impellers standard•IndustrystandardNEMAmotors•Stainlesssteel,self-aligned mechanical seal•Backpulloutdesign•Clamp-typemountingplate•Options

– Cast iron, bronze or 316 stainless steel impellers

– Stub shaft design

Related Configurations •SMPstandardmotorpump•SMXnon-metallicstandard motor pump

See Bulletin PS-10-26

Standards•ISO13709/API610(VS4),latested.

Operating Parameters•Flowsto1000m3/h (4400 gpm)•Headsto150m(500ft)•Pressuresto20bar(285psi)•Temperaturesto350°C(660°F)•45sizesavailable

Features•Lineshaftconfiguration•Fourimpellerdesigns

– Closed multivane impeller with front wear rings and back vanes – Closed multivane impeller with front and rear wear rings – Open multivane impeller with back vanes – Free flow impeller with back vanes

•Multipleshaftsealingoptions– V-ring– Throttle bushing– Lip seal with grease-filled stuffing box– Soft packing

•ISO21049/API682sealchamberaccommodates multiple seal types

•Columnlengthsto6m(22ft); suction pipe available

•ChoiceofISO/APImaterials•NACEMR0175materialsavailable•Internalorexternalbearingflushing•Bearingcooling•Suctionstrainer

See Bulletin PS-10-10

Positive Displacement

51

Positive DisplacementGearGR Series 52GA Series 52Gearex 52

ScrewTSP 53MP1 53MP1 Systems Packaging 53

ReciprocatingYHT 54HS 54VTE 54VQE 54V 54VSE 54

Overhung – General Industry

52

Positive Displacement – Gear

52

GR SeriesDouble Helical, Gear

GA SeriesCast Iron,Double Helical, Gear

GearexDouble Helical,Timed Gear

Standards•Flowserve

Operating Parameters •Flowsto275m3/h (1200 gpm) •Pressuresto35bar(500psi)•Temperaturesto350°C(650°F)•Speedsto1800rpm•Viscositiesto1millionssu

Features•Doublehelical,herringbonegears•Quiet,pulse-freeflow•Highspeedpumpcapability•Betweenbearingsdesign•Hydraulicallybalanceddesign•Stuffingboxaccommodatespacking

or mechanical seals•High-capacity,doublerowrollerbearing•Self-priming•Rundrycapability•LowNPSHr•Backpulloutdesign•Options

– Mechanical seal – Direct V-belt drive – Extra deep jacketed stuffing box – Jacketedbody– Babbitted carbon sleeve bushing – INSUROCK® wearplates – Integral safety relief valve

Available Configurations•GRstandardgearwidth•GRWwidegearsforhighflows•GRHnarrowgearsforhighpressures

See Bulletin PS-60-3

® INSUROCK is a registered trademark of Richardson Company, Inc.

Standards•Flowserve

Operating Parameters •Flowsto27m3/h (120 gpm) •Pressuresto17bar(250psi)•Temperaturesto175°C(350°F)•Speedsto1800rpm•Viscositiesto50000ssu Features

Double helical, herringbone gears •Quiet,pulse-freeflow•High speed pump capability - •off-the-shelf motorsBetween bearings design •Self-lubricated babbitted carbon •sleeve bearings standard; bronze bearings optionalHydraulically balanced design – •no thrust bearings neededConvertible stuffing box accommo-•dates packing or mechanical seals Threaded ports •Back pullout design •Available integral safety relief valve •Multiple mounting configurations •

Related ConfigurationsGAS foot mounting (standard)•GAF flange mounting •GAC close coupled •

•GSXseriesstainlesssteel,double helical, rotary gear pumps

Standards•Flowserve

Operating Parameters •Flowsto180m3/h (800 gpm) •Pressuresto20bar(300psi)•Temperaturesfrom-50°C(-60°F) to450°C(850°F)

•Viscositiesto1millionssu

Features•Doublehelical,herringbonegears•Quiet,pulse-freeflow•Externaltiminggears•Betweenbearingsdesign•Heavy-duty,doublerowroller

bearings •Directcoupled•Options

– Water cooled bearings – Steam or water jacketed bodies – Vertical mounting configuration – Mechanical seals – Lantern rings – Shaft slingers – Split bearing brackets – Flange mounting brackets – JackshaftsforV-beltdrives

Overhung – General Industry

53

Positive Displacement – Screw

53

MP1Multiphase Twin-Screw

MP1Systems Packaging

TSPDouble Suction, Twin-Screw

StandardsAPI 676, latest ed.•

Operating Parameters Flows to 1990 m• 3/h (8750 gpm) Pressures to 50 bar (720 psi) •Temperaturesto450°C(850°F)•Speeds to 2000 rpm •Viscosities to 8000 cp•Multiphase pumping to 100% GVF •(gas void fractions)

FeaturesNon-contacting design with •one-piece pump shaftsThree pumping locks for low •pulsation flowThrough-bolt bearing bracket design•ISO 21049/API 682 seal chamber •with split brackets accommodates single and double cartridge sealsDouble suction design with low •NPSH capabilityAGMA 11 helical timing gears•Chrome plated bores and hard •coated screwsOptions•

Multiple hard coatings for bores −and screwsChoice of materials, including NACE −Customized pitch −Customized packaging −Variable speed drive −Natural gas or diesel engine drive −

Other ConfigurationsHigh pressure: 100 bar (1450 psi)•

See Bulletin PS-60-2

StandardsFlowserve•ASME•

Features

Standard or custom engineered •system packaging availableDriver options•

Electric motor −Electric motor with variable speed −drive (VSD)Diesel or natural gas engine −

Complete piping systems•Suction, discharge, bypass and −recycle pipingBlock valves, control valves and −check valvesFilters and strainers −Pressure, temperature and flow −instrumentation

Complete, integrated control systems•PLC based −Controls for pump, valves, instru- −mentation and alarms, VSD, etc.Motor control center −

Single and multiple skid options •for integration of controls, pump and pipingSpecial enclosures for arctic- •like conditions or other harsh environments

StandardsAPI 676, latest ed.•

Operating Parameters•Flowsto2550m3/h (11 200 gpm) •Pressuresto100bar(1450psi)•Temperaturesto450°C(850°F)•Speedsto1800rpm•Viscositiesto200millionssu•Slurryconcentrationsto70% by weight

Features•Positivedisplacement timed two-screw•Doublesuctiondesign

Split bearing bracket for ease •of maintenance

•VersatileISO21049/API682 compliant stuffing box design

•Integralorpinnedscrewelements•Spur-toothtiminggears•Chrome-platedpumpbores•Options

– Fully external bearings and timing gears

– Internal bearings and timing gears – Temperature control packages– Hopper-top construction– Vertical barge configuration – Choice of materials – Multiple hard coatings for bores

and screws

See Bulletin PS-60-1

Overhung – General Industry

5454

Positive Displacement – Reciprocating

YHT and HSHorizontal Reciprocating

VTE, VQE, V and VSE Vertical Reciprocating

Standards•API674,latested.•ASMEsectionIII

Operating Parameters•75mm(3in)to250mm

(10 in) stroke •Flowsto775m3/h (3400 gpm)•Standardpressuresto555bar

(8030 psi); custom pressures to 2070 bar (30 000 psi)

•Temperaturesfrom-40°C(-40°F) to350°C(650°F)

•Powerto2560kW(3430hp)•Speedsto530rpm

Features•Self-aligningplungers•Sectionalizedfluidendcomponents•Fullyenclosedpowerendwith generous oil reservoir•Independentcrossheadextensionrod•Integrally cast and precision machined

cylindrical crosshead guides•Triplelipsealatcrossheadextensions•FullyreversiblecrankshaftforV-belt

drive or direct coupling•Stuffingboxassembliesindividually

bolted to fluid cylinder•Splash-typeorfullpressure lubrication system•Threadedprimarydrain•Options

– Overhead motor mounting– Spring loaded stuffing box– Discharge pulsation dampeners

See Bulletin PS-70-1

Standards•API674,latested.•ASMEsectionIII

Operating Parameters•140mm(5.5in)to225mm

(9 in) stroke •Flowsto1140m3/h (5000 gpm)•Standardpressuresto619bar

(8975 psi); custom pressures to 2070 bar (30 000 psi)

•Temperaturesfrom-40°C(-40°F) to350°C(650°F)

•Powerto3450kW(4625hp)•Speedsto360rpm

Features•Outboardpackedinverteddesign•Easilyaccessiblestuffingbox•Integratedsuctionanddischarge

manifold•Completeseparationofliquidend

from power end•Valvedesignsuitableforconditions

of service•Sphericalfeatureforplungeralignment•Power-endmaintenance

inspection covers •Forcedfeedlubrication

Options•Spring loaded packing −Pulsation dampeners −Sectionalized fluid ends −

See Bulletin PS-70-1

Overhung – General Industry

5555

Specialty Products

57

Specialty ProductsNuclear Pumps and SealsDFSS 58DVSS 58N-Seals 58WDF 58DVSR 59CN 59HDR 59CA 60CAM 60CAV 60EG 61MEV 61

Extreme Temperature WUC-LNG Cryogenic 62VKW Cryogenic 62TKW Cryogenic 62Byron Jackson 62 SUBM Geothermal

OthersHydraulic Decoking Systems 63Pleuger WFSD 63 Azimuthing Thruster DWEER™ 64 ERT 64CVP 64Barge Pump 65Molten Salt VTP 65

Overhung – General Industry

5858

Specialty Products – Nuclear Pumps and Seals

DFSS and DVSSNuclear Radially Split, Single Stage

WDF Nuclear Vertical, Single Stage

StandardsASME Section III, Class 1•

Operating Parameters•Flowsto24500m3/h(108000gpm) •Headsto250m(820ft)•Pressuresto170bar(2500psi)•Temperaturesto300°C(580°F)•Speedsto1800rpm•Powerratingto9400kW(12600hp)

ServicesPrimarycoolant•Reactorrecirculation•Primaryheattransport•

Features•Fourthgenerationdesign•One-piececastpumpcasing•DoublevolutedesigncaseforBWRandPHWR

•Diffuserwithtorus-typedesign casingforPWR•Upgradedrotatingelement–One-pieceweldedshaft-impeller-journalassembly

–Fullymachinedandbalanced assinglerotatingunit

•Hydrostatic-pressurizedradialbearing–Operatessubmergedinradioactivesystemwateratlooptemperature

ofapproximately300°C(580°F)

See Bulletin FPD-2

StandardsASMESectionIII,Class2and3•

Operating Parameters•Flowsto900m3/h(4000gpm)•Headsto245m(800ft)

Services•Containmentspray•Lowpressuresafetyinjection•Residualheatremoval

Features•Vertical,singlestagedesign•Bottomsuction,horizontaldischarge•Forgeddiffusercasingdesign•Optimizedhydraulicperformance•Uniquespacercouplingdesign•Mechanicalsealreplacementwithoutmotororcasingcoverremoval

•Upgradedrotordesign–Radialbearinglocatedbetween couplingandseal–Reducedshaftdeflection–Improvedpumpandmechanicalseallifeandreliability

•Cartridgemechanicalseal•Reducedassemblytime

See Bulletin FPD-2

StandardsASME Section III, Class 1•

Operating Parameters Pressuresto150bar(2175psi)•Temperaturesto80°C(180°F)•Speedsto1800rpm•

Services Primarycoolant•Reactorrecirculation•Primaryheattransport•

FeaturesControlledleakageseal•Twotofourstageconfigurations•Provisionsformonitoringpressure,•temperatureandflowateachstageInternalscreensfortrappingparticles•Eachstagecapableofhandlingfull•systempressure-redundancyOptionalhydrodynamicfeaturesand•dirtgroovesVarietyofsealfacematerialsavailable•Allstagesusethesamecomponents•andareinterchangeableSealfacesaresupportedbygaskets •tominimizepressurepoints anddeflection

See Bulletin PSS-80-2.2

N-Seals Nuclear Mechanical Seals

Overhung – General Industry

5959

Specialty Products – Nuclear Pumps and Seals

DVSR Nuclear Radially Split, Volute Casing, Single Stage

StandardsASMESectionVIII•

Operating ParametersFlowsto4535m• 3/h(19945gpm)Headsto800m(2625ft)•Pressuresto100bar(1470psi)•Temperaturesto210°C(410°F)•Powerto8000kW(10700hp)•Speedsto6000rpm•

Services Reactorandsteamgeneratorfeedwater•

FeaturesCastvolutecasingconfiguration•Doublecoverdesign•Highspeedpumpdesign•Doublesuctionimpeller•Centerlinemounted•Pressurebreakdownbushingor•mechanicalsealSleeveradialandtiltingpadthrust•bearingsstandard

See Bulletin FPD-2

CN Nuclear Radially Split, Diffuser Casing, Single Stage

StandardsASMESectionVIII•

Operating ParametersFlowsto5065m• 3/h(22300gpm)Headsto800m(2625ft)•Pressuresto100bar(1470psi)•Temperaturesto210°C(410°F)•Powerto11200kW(15000hp)•

•Speedsto6000rpm

Services•Reactorandsteamgenerator feedwater

FeaturesDiffusercasingconfiguration•Forgedbarrel•High-speedpumpdesign•Doublesuctionimpeller•Specialimpellerdesignsforlow•NPSHaconditionsCenterlinemounted•Pressurebreakdownbushingor•mechanicalsealSleeveradialandtiltingpadthrust•bearingsstandard

See Bulletin PS-80-2

HDR Nuclear Radially Split, Volute Casing, Single Stage

StandardsASMESectionVIII•

Operating ParametersFlowsto5065m• 3/h(22300gpm)Headsto800m(2625ft)•Pressuresto100bar(1470psi)•Temperaturesto210°C(410°F)•Powerto11200kW(15000hp)•

•Speedsto6000rpm

Services•Reactorandsteamgenerator feedwater

FeaturesVolutecasingconfiguration•Forgedbarrel•High-speedpumpdesign•Doublesuctionimpeller•Specialimpellerdesignsforlow•NPSHaconditionsCenterlinemounted•Pressurebreakdownbushingor•mechanicalsealSleeveradialandtiltingpadthrust•bearingsstandard

See Bulletin PS-80-2

Overhung – General Industry

6060

Specialty Products – Nuclear Pumps and Seals

StandardsASMESectionIII,Class2and3•

Operating Parameters Flowsto60m• 3/h(265gpm)Headsto2000m(6560ft)•Pressuresto235bar(3410psi)•Temperaturesto100°C(212°F)•Speedsto3600rpm•

Services CVCScharge•

FeaturesMultistage,doublecasedesign•Barrelratedatfulldischargepressure•Suctionanddischargeconnectionsat•bottomofbarrelDiffuserdesignwithback-to-back•impellermountingtominimizethrustCartridgemechanicalseal•Thrustbearingsprovidedineither•pumpormotorasrequiredSpacercoupling•

See Bulletin FPD-2

CAV NuclearVertical, Double Case, Multistage

CA NuclearDiffuser Casing, Multistage, Utility Barrel

CAM Nuclear Diffuser Casing, Multistage, Utility Barrel

StandardsASMESectionIII,Class2and3•

Operating ParametersFlowsto45• m3/h(200gpm)Headsto1920m(6300ft)•Pressuresto235bar(3410psi)•Temperaturesto120°C(250°F)•

Services•CVCScharge•Controlroddrive

Features•Multistage,doublecasedesign•Unique,compactdesignpatentedmodularimpellers–Low-flowstabilityandreliability overawiderangeofflows

–NosurgingorpulsationsBall-ballconstruction•Drydiskspacercoupling•Flangedaxialthrust-balancingdevice•Modularizedassemblyand •disassemblymaybeconducted withouttheuseofatorchForgedbarrelwithno •attachmentweldsCartridgemechanicalsealswith •noattachmentweldsNoauxiliarycoolingrequired•

See Bulletin FPD-2

StandardsASMESectionIII,Class2and3•

Operating ParametersFlowsto5250m• 3/h(23000gpm)Dischargepressuresto450bar •(6500psi)

•Temperaturesto250°C(480°F)•Speedsto6000rpm

ServicesSafetyinjection•

FeaturesInternalcasingwithsegmented •stageelementsDiffuser-guidevaneconstruction•Precisioncastin-lineimpellers•Heavy-dutyforgedbarrelwithforged•steeldischargecoverBalancedrumandsleeve,made •fromhardenedstainlessforgingsBallthrustandballradialbearings•Fan-cooledbearinghousings•Renewablecasingringsandsleeves•Groundforgedsteelshafting•Cartridgeseals•

See Bulletin FPD-2

Overhung – General Industry

6161

Specialty Products – Nuclear Pumps and Seals

StandardsASME Section III, Class 3•

Operating Parameters Flowsto4000m• 3/h(17610gpm)Headsto60m(200ft)•Pressuresto14bar(200psi)•Temperaturesto80°C(180°F)•Powerto950kW(1275hp)•Speedsto3600rpm•

Services Componentcoolingwater•

FeaturesCastvolutecasing•Doublecoverdesign•Doublesuctionimpeller•Centerlinemounting•Sidesuctionandsidedischarge •locatedabovethemountingfeetCartridgemechanicalseal•360°bearinghousings•Ballradialandballthrustbearings•

See Bulletin FPD-2

EG NuclearRadially Split, Double Suction

StandardsASME Section III, Class 3•

Operating Parameters Flowsto5400m• 3/h(23760gpm)Headsto50m(160ft)•Pressuresto14bar(200psi)•Temperaturesto80°C(180°F)•Speedsto3600rpm•

Services Essentialandnon-essential •servicewater

FeaturesCastcasingandcover•Bottomsuction,horizontaldischarge•configurationSinglestage,enclosedimpeller•Fabricatedmotorstand•Cartridgemechanicalseal•Radialrolleranddoubleball •thrustbearingsGreaselubricatedbearings•

See Bulletin FPD-2

MEV Nuclear Vertical, Single Stage

Overhung – General Industry

6262

Specialty Products – Extreme Tem

perature Pumps

WUC-LNG Cryogenic (VS6) Vertical, Double Case, Multistage

VKW and TKW Cryogenic Liquid Expander (VS6) Double Case, Multistage, Electric Generator

Byron Jackson SUBM Geothermal Deep-Well Submersible

StandardsAPI610(VS6),latestedition•ASMESectionsVIIIandIX•GermanPressureVessel •Association(AD)BritishStandardBS5500•CompliancewithPressureEquipment•Directive97/23/EC

Operating Parameters•Flowsto3000m3/h(13000gpm)•Headsto1200m(3900ft)•Pressuresto200bar(3000psi)•Temperaturesfrom-200°C(-325°F) to-45°C(-50°F)

Features•Cofferdamsystem•Radialormixedflowhydraulics•Lowsuctionvelocitycandesign•Optionalaxialthrusttiltingpad bearingconfiguration•Stiffshaftdesign•API682compliantmechanical sealchamber•Flangedspacertypecoupling•Screen-type,non-sparking couplingguard•Insidedrainline•Casingandimpellerwearrings•Reinforcedmotorstand•Optionalinducer

Related Configurations•WUC(VS6)doublecase, multistage

See Bulletin PSS-40-9.1

StandardsAPI610(VS6),latestedition•ASMESectionsVIIIandIX•

Operating ParametersExpanderflowsto2500m• 3/h

(11000gpm)•Inletpressuresto70bar(1000psi)•Temperaturesto-180°C(-290°F)•Powerto3MW(4000hp)•Runawayspeedto5400rpm

Features•Variableorfixedgeometry•Externallydrivenremoteandlocalcontrolledvariablewickets

•Optimalisentropicefficiency•Overallimprovementofcompressorpowerefficiency

•Air-cooledgenerator•Temperaturereductionthrough liquidexpansion•Additionalelectricgeneration•Lowvibration•Lownoiselevel•State-of-the-artgasseal•Optimumspecificspeedselection

Available Configurations•TWKvariablegeometry,double casing,multistage,electricgenerator

•VKWfixedgeometry,doublecase,multistage,electricgenerator

See Bulletin PSS-90-7.1

StandardsIEC/VDEandothercertifications•

Operating ParametersFlowsto720m• 3/h(3170gpm)Headsto800m(2625ft)•Temperaturesto160°C(320°F)•Motorsizesto1500kW(2000hp)•Speedsfrom2900to3500rpm•Innerwelldiametersfrom340mm •(13-3/8in)to508mm(20in)

FeaturesPumpandmotordesignfor •geothermalapplicationOilfilledmotorwithself-contained •forcefeed,filtered,cooledoil circulationsystemVacuumpressureimpregnated(VPI)•epoxy,ClassF,insulationsystemWindinginsulationsystemClassC•220°C(428°F)Doublecableplugconstruction•Double-actingthrustbearingsystem•Dynamicallybalancedheavy-duty,•high-efficiencyimpellersOptionalvariablefrequency•Choiceofmaterials•Doublemechanicalseal•Motordesignwithbreatherdiaphragm•forpressurecompensationNon-returndesignforhighpressure•Downholemonitoringsystem•

Other ConfigurationsByronJacksonSUBMdeep-well •submersible(oil-filleddesign)

Overhung – General Industry

6363

Specialty Products – OthersHydraulic Decoking Systems

Flowserve Automated Hydraulic Decoking Systems Increasedelayedcokingunit(DCU)•capacityandimproveoperatorsafetyInstalledinmorethan95%of •theworld’sDCUsCompletesystemswithvirtuallyall•equipmentneededtooperateandcontrolthehydraulicdecokingprocessExtensiveaftermarketsupport•includingspecialiststoevaluatesystemperformance,improvereliability,andrecommendoperationalandsafetybestpractices

Complete Coke Cutting Systems Jetpumptrain:ISO13709/API610•(BB5)jetpump,driver,lubeoilskidandcontrolsystempanelCokecuttingsystem:decoking •controlvalve,AutoShift™combinationcuttingtool,rotaryjoint,isolationandbleedvalves,drillstem,toolguideandenclosureandhigh-pressurehoseCuttingassemblyliftingsystem:•crosshead,free-fallarresters,winchesandwinchcontrols,pulleyblocks, andlatchmechanismtostow thecrossheadAutomation,controlsand •instrumentation

AutoShift Combination Cutting ToolRemovestheoperatorfromthe •cuttingdeckModeshiftingisaccomplished •automaticallyandremotelybywaterpressurizationanddepressurization

Providesgreatersystemautomation•andimprovedefficiencywhile improvingoperatorsafety,reducingcycletimeandeasingmaintenanceModeshiftinghelpstofreeimpeded•toolsfromslumpedbeds

Advanced Cutting ControlCompletesystemsandenclosures •tomonitorandcontroltheoperationsContinuousfeedbacksignals •indicateequipmentanddrumstatus (i.e.,positionindrum,rotationalspeed,woreropetension,etc.)Embeddedintelligencetoprocess •dataformonitoringandcontrol; operatorinterfaceonlyrequired forsequenceexceptionVideoandacousticequipmentto•monitorcuttingdeckoperationsandcokechuteconditionsRemotewinchandrotaryjoint •operationRemotesensingofcuttingjet•impingementonthecokedrumInterlockingsafetysystems•IPSAPEX™datamonitoring, •transmissionandcontrolsystems

Online Assurance ProgramsAccesstodataaggregationtoolsvia•theTechnologyAdvantage™PortalEnableexpertstomonitor,diagnose•andcommunicateoperating solutionstoincreaseunituptime

See Bulletin PS-90-6

StandardsFlowserve•

ApplicationsSemi-submersibledrillingrigs•Floatingproduction,storageand•offloadingvesselsDrillships•Cranevesselsandpipelayvessels•

FeaturesUpto5m(16.5ft)propellerdiameter•Upto4500kW(6000hp)input•4-or5-bladefixedpitchpropeller•7°tiltedpropellershaft•Propulsionandsteeringwiththrust −inanydirectionMinimalthruster-hulland −thruster-thrusterinteractionforhighernetthrusteroutputMountinganddismantling −underwaterwithoutdry-dockingCustomizationtomeetspecific −applicationneeds

Duplexthrustbearingallows •windmillingatanyspeedAutomaticpressurecompensation•systemadaptsdifferentialpressure todraftFullyfloodedgearhousingprovides•optimumlubricationEasyunderwatermounting;secured•duringinstallationbyhydraulicallyoperatedlockingmechanismFullyredundantclosed-loophydraulic•steeringsystemasstandard

See Bulletin PSS-90-8.1

Pleuger WFSD Azimuthing Thruster

Overhung – General Industry

6464

Specialty Products – Others

CVPVertical, Concrete Volute

Standards•FlowserveHydraulicInstitute•

Operating Parameters•Flowsto115000m3/h(500000gpm)•Headsto45m(147ft)

Features•Verticaldry-pitdesignRemovablemetallicpumppullout•unitwithinaconcretevolute

•Suctionbellconnectedtopreformedhighefficiency,vortex-freeconcretesuctionbox

•OpenmixedflowandclosedmixedflowimpelleroptionsDryshaftdesign•Nosubmergedbearings•

•Bearingsandsealingsystems easilyaccessible•Prefabricatedconcretesegments•Highlycorrosionanderosionresistant•Liquidyne®ormechanicalshaftseal•InflatablestaticsealEngineeredtocustomerspecifications•

Available ConfigurationsBSVopenmixedflowimpellerdesign•BCVclosedmixedflowimpellerdesign•

See Bulletin PS-40-1

®LiquidyneisaregisteredtrademarkofIHC

DWEER TM

Dual Work Exchange Energy Recovery

ERTEnergy Recovery Turbine

StandardsFlowserve•

Operating Parameters Brineflowsto350m• 3/h(1.4MGD);greaterflowscanbeachievedbyplacingmultipleDWEERunitsinparallelPressuresto75bar(1090ft)•

FeaturesHighestefficiencyenergyrecovery•deviceavailableNoiselevelsbelow83dBa•Selfadjustabletochangingoperating•conditionsSuperduplexstainlesssteelorfiber•reinforcedplasticpressurevesselNoleakage/lubricationrequired•PatentedLinX™valveregulates•flowintovesselsProvenlong-termreliability•Capableofpassingsolids/debris•(noadditionalstrainersrequired)Systemresponsibilitywith•integratedcontrolsSlowoperatingspeed•Smoothincreaseanddecreaseof•systempressureduringstartupandshutdown

See Bulletin FPD-18

StandardsFlowserve•

Operating Parameters Brineflowto1200m• 3/h(5280gpm)Pressuresupto80bar(2715ft)•Efficiencyupto90%•Powerto1500kW(2025hp)•Specialdesignsavailableonrequest•

FeaturesEspeciallydesignedforseawater•reverseosmosis(SWRO)applicationsStandardizedproductline•Wettedpartsinsuperduplex•stainlesssteelandnon-metallicsProvenlong-termreliability–over25•yearsoperatingexperienceSimpleplantintegrationandcontrol•Horizontalsplitcasing•Externalstandardbearings•Labyrinthdoubleseals•FlatoperatingcurveovertypicalRO•performancerangeNomixing,overflushorleakage•

See Bulletin FPD-18

Overhung – General Industry

6565

Specialty Products – Others

Standards•Flowserve

Operating Parameters•Flowsto1020m3/h(4500gpm)•Headsto185m(600ft)•Pressuresto8.6bar(125psi)•Temperaturesfrom-30°C(-20°F) to230°C(450°F)

•Dischargeflangesto250mm(10in)

Features•Pollutionpreventiondesign•Dischargeheadwithaccessports•Rabbetedfitmotorshaft toheadshaft

•1.5m(5ft)columnpieceswith integrallyfabricatedbearingsupport

•Automaticstuffingboxbleed-off andvalveddrainline

•SpeciallowNPSHpriming stageimpeller

•Semi-openseriesstageimpeller•Automaticairseparationchamber withcontinuousseal

See Bulletin PSS-40-7.2

Barge Pump Molten Salt VTP

Standards Flowserve•

Operating Parameters Flowsto13600m• 3/h(60000gpm)Headsto530m(1740ft)•Pressuresto100bar(1450psi)•Temperaturesto600°C(1100°F)•Settingsto20m(65ft)•

Features Lowpumpsubmergenceallowsfor•greaterenergygenerationLowNPSHrforenhancedsuction •performanceExcellentheatdissipationprevents•distortionathightemperaturesAdvancedfluidsealingsystem•Materialsengineeredtoequalize •thermalgrowthandforestalldistortionWetpitortankmounted•Dynamicallybalancedenclosed •impellersFlangedcolumnpipewithopen •lineshaftconstructionProductlubricatedbearings•Coolingfan/disc•Draintubes•Otheroptions•Integralaxialthrustbearing −Thrustbalancedimpeller −Couplingbellows −ISO13709/API610construction −

Related Configurations FRBHJCcantileversump•CPXVchemicalsump•

See Bulletin FPD-16

Additional Information

67

Additional InformationIntegrated Solutions Group 68Other Flowserve Products 70Reference Sources 71

68

Reduce life cycle costs.

Manage assets more efficiently.

Increase plant uptime.

Enhance workforce skills.

Whether in a refinery, power plant or chemical complex, these ideas are taking hold as plant operators intensify their focus on maximizing plant profitability. Historically, applying these con-cepts to pumps and pumping systems has been achieved through reactive aftermarket programs. The Flowserve Integrated Solutions Group (ISG) is dedicated to helping customers proactively apply the principles of life cycle cost savings, asset opti-mization and equipment availability to pumps and pumping systems.

Flowserve Integrated Solutions GroupIt’s About the Bottom LineFlowserveISGhelpscustomerstakeadvantage ofafocusedsetofaftermarketcapabilitiesandtechnologiesdevelopedtoderivegreatervaluefromtheirplantinvestments.Throughtheapplicationofengineeringknow-how,industry-specificexpertise,comprehensivetrainingcapabilitiesandadvancedtechnologies,Flowservehelpscustomersfocusontheissuesthathavethegreatestpotentialtoimprovetheirbottomlines. FlowserveISGhelpscustomersachieve:Plantoutputoptimizationthroughincreased •equipmentavailabilityEnergyreductionsattheplant,unitor •equipmentlevelEquipmentoptimizationbyincreasingmean •timebetweenrepair(MTBR)orbyoptimizingperformanceforactualsystemrequirementsWorkforceskillsetdevelopmentfortechnical,•maintenanceandoperationsresourcesEnvironmentalprotection•Safetyandhealthprotection•Costreductionsthroughinventoryand •procurementoptimization

Notwosituationsarethesame,soISGtailors itssolutionsandprogramstohelpeachcustomerrealizethefullpotentialofitsassets.

69

flowserve.com

Tohelpcustomersachievemaximumvaluefromtheirinvestments,FlowserveISGoffersacomprehensive setofaftermarketservicesandprograms.

Technical ServicesAglobalteamofmorethan150designandapplications engineersisfocusedexclusivelyonhelpingcustomersmaximizeoperationalperformanceandplantprofitability. Withaccesstodiagnostictechnologies,testingfacilities, mechanicalandhydraulicengineeringtools,andnumeroussupportresources,thisteamperformsexhaustivesystemassessmentsandimplements solutionsbasedonlifecyclecostjustifications.Technicalassessmentsofpumpsandsystems •forreliabilityandenergyconsumptionEquipmentupgrades,re-ratesandretrofits•Energyreductionandbadactorprograms•

Asset ManagementFlowservecanhelpcustomersproactivelymanage theirplantassets.FlowserveISGoffersvariouslevelsofassetmanagementcapability,frompoint-specificequipmentmonitoringtocomprehensivemanagementsolutionswithequipmentrecords,drawings,real-timeoperationaldataanddecisionworkflows.

Education and TrainingEducationalServicesoffersawiderangeofprograms thathelpplantoperators,reliabilityengineersandmaintenancepersonneldeepentheirunderstanding ofpumpsandpumpingsystems.Maximizeplantassetavailabilityandreliability•Increasemeantimebetweenrepair(MTBR)•Improveproficiencyintheinstallation,maintenance•andrepairofpumpingequipmentandsystems

Business ConsultingFlowserveISGBusinessConsultantshelpcustomersidentifysavingsopportunitiesassociatedwithbusinessandoperationalprocesses.Typicalengagementsfocusonprocurementefficiency,inventoryoptimiza-tionandhigh-levelperformanceanalysesandcom-parebusinessperformancemetricstoestablishedindustrybenchmarks.Implementationplanswithcostjustificationsprovidecustomerswitharoadmapforachievingidentifiedsavingsandefficiencygains.

Technology Advantage™Whether temporarily employed for data acquisition or permanently deployed as part of an asset management program, Technology Advantage solutions allow customers to easily access, acquire and interpret data while also incorporating industry-leading diagnostics. This platform includes important capabilities such as:

Equipment monitoring via wired and wireless •systems with simple integration to plant control systems

Diagnostics technologies with intelligent, •application-specific algorithms that predict equipment behavior and fault conditions

System optimization and control technologies •that respond to user-defined process parameters and adjust equipment operation to optimized or safe duty points

Data visualization and asset management •tools through the Technology Advantage Portal

70

Flowserve ValvesWiththeindustry’smostcompleterangeofvalves,actuators,positioners,controls,switchesandsteamsystems,Flowserveprovidescustomersaone-stopsolutionfortheirflowcontrolneeds.

Withcomprehensiveresearchanddevelopment,engineeringandglobalsupport,Flowservevalvesoffersvalveapplicationssolutionsfromsimpleisolationservicetointelligentprocesscontrol.

TolearnmoreaboutFlowservevalvesandseals,visitwww.flowserve.com.

Flowserve has the systems, products and experience to help processes run smarter, safer and more efficiently. In addition to its extensive pump product line, Flowserve offers high-quality seals and valves.

Flowserve SealsFlowservemanufacturesandmarketshighlyengineeredmechanicalshaftsealsforcontainingcorrosive,volatile,abrasive,preciousorflammablefluid.Theyareusedonpumpsandotherrotatingequipment.

Thecompleteseallineincludescartridge,dry-running,metalorelastomerbellows,splitandzeroemissiongasbarrierseals.Offeringinnovativesealdesignandserviceondemand,Flowserveis committedtothedevelopmentof newtechnologiestofurtherreduce maintenanceandoperatingcosts foritscustomers.

Other Flowserve Products

Providing Complete Fluid Motion Control Equipment and Services

71

flowserve.com

Cameron Hydraulic DataFirstpublishedin1926andnowinits19thedition,theCameronHydraulicDatabookisanindispens-ableaidtoengineersinvolvedwiththespecification, selectionandapplicationofpumpingequipment.Thiscomprehensivereferencetoolincludes:•Hydraulicprinciplesandformulae•Frictiondata•Propertiesofcommonliquids•Steamandelectricaldata•Weights,dimensions,andratingsofpipe flangesandfittings

•Metricconversions

ToobtainacopyoftheCameronHydraulicDatabookvisit:www.cameronbook.com.

Pump Engineering ManualThispublicationisdevotedtoexplainingcentrifugalpumpprinciples.Itcoversthebasicsfromapplica-tionanalysisandaffinitylawsthroughhydraulicsandmechanicalphenomenatotroubleshooting.

ToobtainacopyofthePumpEngineeringManualvisit:www.cameronbook.com.

Pump Industry StandardsTolearnaboutindustrystandardspertainingtothedesignandperformanceofpumpscontactthefollowingorganizations:

•AmericanPetroleumInstitute(API) www.api.org

•AmericanSocietyofMechanicalEngineers (ASME–ANSI) www.asme.org

•AmericanSocietyofTestingandMaterials(ASTM) www.astm.org

•EuropeanSealingAssociation(ESA) www.europeansealing.com

•Europump www.europump.org

•DeutschesInstitutfürNormung(DIN) www.din.de/

•FluidSealingAssociation(FSA) www.fluidsealing.com

•HydraulicInstitute(HI) www.pumps.org

•InternationalOrganizationforStandardization(ISO) www.iso.org

PROS+PROS+proposalandordersystemisthemostcompre-hensiveanduser-friendlypumpselectionprogramintheindustry.ThissoftwareensurescorrectsizingandselectionofFlowservepumpstobestsuityourprocessapplicationneeds.

PROS+isavailablefromyourlocalsalesrepresentativeoron-lineatwww.flowserve.com.

Reference Sources

72

AAFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

APKC (See APKD) . . . . . . . . . . . . . . . . . . . . . . 43

APKD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

BBarge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

BCV (see CVP) . . . . . . . . . . . . . . . . . . . . . . 41, 64

BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

BSV (see CVP) . . . . . . . . . . . . . . . . . . . . . . 41, 64

Byron Jackson SUBM (Oil-Filled Design) . . 44

CCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

CAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

CAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

CHTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

CPX3 Close Coupled . . . . . . . . . . . . . . . . . . 13

CPX3 ISO Standard . . . . . . . . . . . . . . . . . . . 12

CPX3 Self-Priming . . . . . . . . . . . . . . . . . . . 12

CPX3 Recessed Impeller . . . . . . . . . . . . . 12

CPXS Magnetic Drive . . . . . . . . . . . . . . . . . 13

CPXV Chemical Sump . . . . . . . . . . . . . 13, 48

CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

CSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

CVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 64

DD800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DFSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

DMX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Drain-Titan. . . . . . . . . . . . . . . . . . . . . . . . 47, 49

DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DSVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DVSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DVSR (non-nuclear) . . . . . . . . . . . . . . . . . . 31

DVSR (nuclear) . . . . . . . . . . . . . . . . . . . . . . 59

DVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

DWEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

EEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ECPJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

EG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

ERPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

ESP3 Chemical Sump . . . . . . . . . . . . . . . . 48

FF-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

FRBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

FRBHJC . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 46

GGA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Gearex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

GR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Guardian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

HHDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

HDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

HDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

HDX-TT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

HED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

HED-DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

HPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

HPXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

HS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

HSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

HSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

HWMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

HWMA2 (See HWMA) . . . . . . . . . . . . . . . . . . . 17

Hydraulic Decoking Systems . . . . . . . . . . 63

LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LLR (See LR) . . . . . . . . . . . . . . . . . . . . . . . . . . 28

LNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

LRV (See LR) . . . . . . . . . . . . . . . . . . . . . . . . . . 28

LPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Mark 3 ASME Standard . . . . . . . . . . . . . . . 10

Mark 3 In-Line . . . . . . . . . . . . . . . . . . . . . . . 11

Mark 3 Lo-Flo . . . . . . . . . . . . . . . . . . . . . . . . 10

Mark 3 Recessed Impeller . . . . . . . . . . . 11

Mark 3 Unitized Self-Primer . . . . . . . . . . 10

ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

MEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

MENBLOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

MEV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

MFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

MJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

MN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

MNV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

MND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

MNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Molten Salt VTP . . . . . . . . . . . . . . . . . . . . . . 65

MP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

MP1 Systems Packaging . . . . . . . . . . . . . 53

MPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

MSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MSP2 (See MSP) . . . . . . . . . . . . . . . . . . . . . . . 18

MSX . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 44, 47

MVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

MVX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Index

73

flowserve.com

NNM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

N-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

PPHL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Pleuger SUBM (Water-Filled Design) . . . 44

Pleuger WFSD Azimuthing Thruster . . . 63

Polybase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PolyChem GRP . . . . . . . . . . . . . . . . . . . . . . 14

PolyChem M-Series . . . . . . . . . . . . . . . . . . 15

PolyChem S-Series . . . . . . . . . . . . . . . . . . . 14

PolyChem VGRP . . . . . . . . . . . . . . . . . . 14, 48

Polyshield . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PVML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

PVXM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

QQL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

QLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

QLQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

QLQC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

RR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

RJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

SSMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SMX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SUBM(See Bryon Jackson SUBM or Pleuger SUBM) . .44

TTerra-Titan . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Titan Slurry . . . . . . . . . . . . . . . . . . . . . . . . . . 19

TKW Cryogenic Liquid Expander . . . . . . 62

TSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

UUZDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

VV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

VCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

VKW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

VPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

VQE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

VSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

VSMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

VTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

VTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

WWCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

WD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

WDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WFSD Thruster (See Pleuger WFSD Azimuthing Thruster) . . . . 63

WIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

WMA (See HWMA) . . . . . . . . . . . . . . . . . . . . . 17

WMA2 (See HWMA) . . . . . . . . . . . . . . . . . . . . 17

WNC-HP (See WNC) . . . . . . . . . . . . . . . . . . . . 35

WNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

WTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

WUC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

WUC-LNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

WUJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

WX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WXB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

WXB-B (See WXB) . . . . . . . . . . . . . . . . . . . . . 35

WXH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

YYHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

USA and CanadaFlowserveCorporation5215NorthO’ConnorBlvd.Suite2300Irving,Texas75039-5421USATelephone:19378905839

Europe, Middle East, Africa FlowserveCorporationGebouwHagepointWestbroek39-514822ZXBredaNetherlandsTelephone:31765028920

Latin America FlowserveCorporationBoulevarddelCafetalEdificioNinina,Local7ElCafetal-CaracasVenezuela1061Telephone:582129853092Telefax:582129851007

Asia Pacific FlowservePte.Ltd.10TuasLoopSingapore637345Telephone:6567710600Telefax:6567794607

To find your local Flowserve representative:

FormoreinformationaboutFlowserveCorporation,visitwww.flowserve.comorcallUSA1800728PUMP(7867)

Bulletin FPD-100f (E/A4)PrintedinUSA.March2010.©FlowserveCorporation

flowserve.com