Upload
tranhanh
View
292
Download
11
Embed Size (px)
Citation preview
Kwikflo submersible pump kits are a total package for installation in anexisting tank or for replacement of an existing submersible pump system. These systems can be assembled to suit a variety of applications including storm water, sewage, trade waste and effluent.
37 38DEWATERING / DRAINAGE VORTEX
39 GRINDER 40 CUTTER
SUBM
ERSI
BLE
PUM
P KI
TS
COMPLETE PACKAGED PUMP SOLUTIONS
SUBMERSIBLE PUMP KITS
The kit includes submersible pumps, valves & fittings, lifting chains, float switches& control panel and can be modified to suit any particular specification.
The Kwikflo Submersible pump kit reduces labour and costs, while ensuring youhave the ” complete packaged pump solution “ to suit your need.
08
PRODUCT PHOTO
PRODUCT PHOTO
COMPLETE PACKAGED PUMP STATIONS1300 ALLPUMPS (255 786) www.allpumps.com.au
SUBMERSIBLE PUMP KITS34 35
BASEMENT PUMPKIT INSTALLATION STROMWATER RUN OFF
SUBM
ERSI
BLE
PUM
P KI
TS36 37
OPTIONS
Flashing alarm light on control panel
Lockable steel control panel
Longer power cables
Longer float cables
Valves and fittings
Class 1 Zone 2 pumps
Single or dual pump
240 or 415 volt
Free standing or guide rail
PUMP OPTIONS
Vortex
Drainage
High Head
Low Head
Cutter
Grinder
Automatic
Manual
SUITABLE FOR
Subsoil
Stormwater
Grey Water
Sewage
Trade Waste
APPLICATIONS
Domestic
Commercial
Industrial
Municipal
SUBMERSIBLE PUMP KITSGENERAL INFORMATION
SUBMERSIBLE PUMP KITSDEWATERING/DRAINAGE
SUBMERSIBLE PUMP KITS - DEWATERING/DRAINAGE
STOCK CODE TYPE PUMP MOTOR (kW) VOLTAGE CONFIGURATION
880021 Drainage KS-05 0.4 240 dual/freestanding
880027 Drainage KS-10 0.75 240 single/freestanding
880030 Drainage KS-10 0.75 240 dual/freestanding
880042 Drainage KS-20 1.5 415 dual/freestanding
880039 Drainage KS-20 1.5 240 dual/freestanding
880051 Drainage KS-30 2.2 415 single/freestanding
880054 Drainage KS-30 2.2 415 dual/freestanding
880060 Drainage KS-50 3.7 415 dual/freestanding
880063 Drainage KS-50 3.7 415 dual/freestanding
880075 Drainage KS-75 5.6 415 single/freestanding
880072 Drainage KS-75 5.6 415 dual/freestanding
880033 Drainage KS-100 7.5 415 dual/freestanding
880012 Class 1 Zone 2 - Drainage DRBLUE50 0.37 240 dual/freestanding
880018 Class 1 Zone 2 - Drainage DRBLUE75 0.55 240 dual/freestanding
880000 Class 1 Zone 2 - Drainage DRBLUE100 0.74 240 dual/freestanding
880006 Class 1 Zone 2 - Drainage DRBLUE200 1.5 240 dual/freestanding
FEATURES & BENEFITS
Open multivane impeller, vortex, centrifugal design
Able to pump soft solids in suspension
Less susceptible to blockage
Capable of higher flows
PRODUCT DESCRIPTION
Dewatering submersible sump pumps with a choice of single or three phase models
APPLICATIONS
Sump empyting
Septic water disposal
Water transfer
Pumping of neutral, non-aggresive factory waste water
SUITABLE FLUIDS
Clean or 'grey water' of neutral pH contain-ing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension
FLOAT SWITCHESPVC CHECK VALVES
DUAL SUBMERSIBLE PUMPS DUAL PUMP CONTROLLER
SUBM
ERSI
BLE
PUM
P KI
TS38 39
VORTEX
SUBMERSIBLE PUMP KITS - GRINDER
STOCK CODE TYPE PUMP MOTOR (kW) VOLTAGE CONFIGURATION
880210 Sewage Grinder GGP1501 1.1 240 single/freestanding
880213 Sewage Grinder GGP1501 1.1 240 dual/freestanding
880216 Sewage Grinder GGP1501 1.1 240 dual/guide rail
880219 Sewage Grinder GGP1503 1.1 415 single/freestanding
880222 Sewage Grinder GGP1503 1.1 415 dual/freestanding
880177 Sewage Grinder GGP1503 1.1 415 dual/guide rail
880225 Sewage Grinder HGP2021 1.5 240 single/freestanding
880228 Sewage Grinder HGP2021 1.5 240 dual/freestanding
880231 Sewage Grinder HGP2021 1.5 240 dual/guide rail
880234 Sewage Grinder HGP2043 1.5 415 single/freestanding
880237 Sewage Grinder HGP2043 1.5 415 dual/freestanding
880255 Sewage Grinder HGP2043 1.5 415 dual/guide rail
880204 Sewage Grinder DIGP-7043 5.6 415 dual/guide rail
880207 Sewage Grinder HGP7043 5.6 415 dual/guide rail
SUBMERSIBLE PUMP KITS - VORTEX
STOCK CODE TYPE PUMP MOTOR (kW) VOLTAGE CONFIGURATION
880360 Vortex KSV-400 0.4 240 single/freestanding
880363 Vortex KSV-400 0.4 240 dual/freestanding
880303 Vortex 50ADVS5.75 0.75 240 dual/freestanding
880306 Vortex 50ADVS5.75 0.75 240 dual/guide rail
880309 Vortex 50ADVS5.75 0.75 415 dual/freestanding
880312 Vortex 50ADVS5.75 0.75 415 dual/guide rail
880315 Vortex 50ADVS51.5 1.5 415 dual/freestanding
880318 Vortex 50ADVS51.5 1.5 415 dual/guide rail
880321 Vortex 80ADVS52.2 2.2 415 dual/freestanding
880324 Vortex 80ADVS52.2 2.2 415 dual/guide rail
880327 Vortex 80ADVS53.7 3.7 415 dual/freestanding
880330 Vortex 80ADVS53.7 3.7 415 dual/guide rail
GRINDER
FEATURES & BENEFITS
Open impeller, vortex, centrifugal design
Able to pump soft solids in suspension
Less susceptible to blockage
Capable of higher flows
PRODUCT DESCRIPTION
High flow vortex submersible sump pumps with a choice of single or three phase motors
APPLICATIONS
Grey water pumping
Sump empyting
Septic effluent disposal
Water transfer
Pumping of light slurries and factory waste
SUITABLE FLUIDS
Clean or 'grey water' of neutral pH contain-ing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension
FEATURES & BENEFITS
Heavy duty shredding & grinding ring at inlet
Centrifugal design, open impeller
Able to pump soft organic solids, sanitary products and even textiles in suspension by shredding to a slurry
Open impeller prevents blockage of the pump by small solid in the slurry
High heads and small solids allow con-nection to small discharge pipe systems, espescially suited to pumping waste water to pressure sewer mains
PRODUCT DESCRIPTION
Submersible pump consisting of a solids handling grinder inlet with a high head open impeller to pump waste waer containing soft solids in suspension
APPLICATIONS
Grey & Black water pumping
Sump empyting
Septic effluent & sewage disposal
Pumping of waste water with soft solids in suspension
SUITABLE FLUIDS
Clean or 'grey water' of neutral pH contain-ing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension
SUBMERSIBLE PUMP KITS SUBMERSIBLE PUMP KITS
SUBM
ERSI
BLE
PUM
P KI
TS40 41
FEATURES & BENEFITS
Open impeller, with tungsten edge cutter,centrifugal design
Able to pump soft solids in suspension
Less susceptible to blockage
Capable of higher heads/pressure
Able to cut string like materials, reducing the risk of blockage in pump or pipework
PRODUCT DESCRIPTION
High head single channel sewage handling submersible sump pumps with cutting impel-ler, available with a choice of single or three phase motors
APPLICATIONS
Sewage water pumping
Sump empyting
Septic effluent disposal
Water transfer
Pumping of light slurries and factory waster
Pumping waste water with stringy or long soft solids in suspension
SUITABLE FLUIDS
Clean or 'grey water' of neutral pH containing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension
CUTTER TYPICAL INSTALLATIONSUBMERSIBLE PUMP KITS
SUBMERSIBLE PUMP KITS - CUTTER
STOCK CODE TYPE PUMP MOTOR (kW) VOLTAGE CONFIGURATION
880168 Sewage Cutter DSK-05 0.4 240 dual/freestanding
880174 Sewage Cutter DSK-10 0.75 240 dual/freestanding
SUBMERSIBLE PUMP KITS
TITLE:
SIZE CODE DWG No: REV
SCALE SHEET
DATE REVISED BYKWIKFLO - TYPICAL SUBMERSIBLE PUMP KITFREESTANDINGSUBMERSIBLE PUMPS DSK10
KF11-10100 0
1 of 1N.T.S
A3 N/A
DRAWN BY: P.LEE
DATE: 11/7/2012ALL DIMENSIONS IN MM
A DIVISION OFALL-PUMPS SALES & SERVICE
83 - 87 FENNELL ST, PARRAMATTA
NSW. 2150.PH: + 61 2 8838 1000FAX: + 61 2 9630 0369
EMAIL: [email protected]
1
5
10
9
8
4
7
6
TYPICAL PUMP KIT INSTALLATION - SUBMERSIBLE PUMPS & ACCESSORIESITEM NO. DESCRIPTION MANUFACTURER QTY COMMENTS
1
CONTROL PANEL - SHEETMETAL300 WIDE x 400 HIGH x150 DEPTH
MAIN FEATURES:IP 55 RATED SUITABLE FOR OUTDOOR OR INDOOR,
POWDER COATED BEIGE COLOR,ALARM LIGHT, KEYED LOCK, TOUCH PAD,
MAIN ISOLATOR SWITCH
ALLPUMPS 1 -----
2 50 mm PVC SWING CHECK VALVE SPEARS 2 -----3 50 mm PVC BALL VALVE ALLPUMPS 1 -----
450 mm PVC PIPE & FITTINGS
ADAPTORS, ELBOWS, TEE ETC... IPLEX ----- OPTIONAL
5
SUBMERSIBLE PUMP - FREESTANDINGMODEL SELECTION BASED ON
CUSTOMER'S APPLICATIONSTANDARD PUMP CABLE LENGTHS
6 M, 12 M
ALLPUMPS 2
SPECIFY PUMP DUTYFLOWRATE ( L/S )
&HEAD ( Metres )
6FLOAT SWITCH - START/STOP
STANDARD FLOAT SWITCH CABLE LENGTHS10 M, 15M, 20 M, 30 M
MATELEC 1 -----
7FLOAT SWITCH - HIGH LEVEL
STANDARD FLOAT SWITCH CABLE LENGTHS10 M, 15 M, 20 M, 30 M
MATELEC 1 -----
8 40 mm PVC PIPE - C/W CUT SLOTS - 3 OFF IPLEX ---- SPECIFY LENGTH9 CHAIN - STAINLESS STEEL OR GALVANIZED ALLPUMPS ----- SPECIFY LENGTH10 MOUNTING HOOKS - STAINLESS STEEL OR GALVANIZED ALLPUMPS 3 -----
11
ELECTRICAL CONDUIT - MINIMUM 40 mm DIATO ALLOW FOR
2 OFF FLOAT SWITCHES&
2 OFF SUBMERSIBLE PUMP CABLES
ELECTRICAL WHOLESALER
----- OPTIONAL
NOTES:
ANY DIVERSION FROM THIS STANDARD INSTALLATION WITHOUT WRITTEN PERMISSION BY ALL PUMPS WILL
VOID WARRANTY
SUPPLIED BY OTHERS:CONCRETE TANK, ELECTRICAL CONDUIT,
DISCHARGE PIPE, FASTENERS
----- ----- -----CONCRETE TANK / PIT
BRICK WALL
11
3
2
10
10
22 TEE
3 ISOLATION VALVE
PUMPED FLOW
ELBOW
TYPICAL PUMP KIT INSTALLATION - SUBMERSIBLE PUMPS & ACCESSORIES
ITEM NO. DESCRIPTION
1 Control Panel - Sheet Metal300 Wide x 400 High x 150 Depth
Main FeaturesIP 55 Rated suitable for outdoor or indoor
Powder coated beige colourAlarm light, Keyed lock, Touch pad
Main isolator switch
2 PVC Swing Check Valve to suit pump size
3 PVC Ball Valve to suit pump size
4 PVC pipe & fittingsAdaptors, Elbows, Tee etc. to suit pump size
5 Submersible Pump - FreestandingModel selection based on
customer's applicationStandard pump cable lengths
6m, 12m
TYPICAL PUMP KIT INSTALLATION - SUBMERSIBLE PUMPS & ACCESSORIES
ITEM NO. DESCRIPTION
6 Float Switch - Start/StopStandard Float Switch - Cable lengths
10m, 15m, 20m, 30m
7 Float Switch - High LevelStandard float switch cable lengths
10m, 15m, 20m, 30m
8 40mm PVC pipe - c/w cut slots - 3 off
9 Chain - Stainless steel or galvanized
10 Mounting Hooks - Stainless steel or galvanized
11 Electrical conduit - minimum 40mm diameterto allow for
2 off float switches&
2 off submersible pump cables
NOTES
Any diversion from this standard installation without written permission by All Pumps will void warranty
Supplied by others: concrete tank, electrical conduit, discharge pipe, fasteners
WARNING
Before installation the pit must be cleared of debris, foreign waste, silt, sludge & rocks. Failure to do so will cause premature pump failure & void the warranty.