LOAD CELLS AND MOUNTING KITS - Optima Weightechoptimaweightech.com.au/ClientContent/Upload/FullCatalog/Load_cell… · output cables; for dual safety systems. • Calibration report

LOAD CELLS AND MOUNTING KITS

SINGLE POINT

BENDING BEAM

SHEAR BEAM

DOUBLE SHEAR BEAM

COMPRESSION-LOW PROFILE

COLUMN

COMPRESSION / TENSION

TENSION

PIN

FOR FOOT BRAKE

ANCHOR

WIRE ROPE MEASURING

MOUNTING KITS AND COMPLEMENTARY ACCESSORIES

LEVEL MEASUREMENTS - FALSE CELLS

2

LAUMAS offers a wide range of load cells of the most common types in the main industrial sectors providing for each of them the quality, availability and assistance.

Load cellsSingle point, shear beam, double shear, bending, tension, compression, low profile, pin, anchor, wire rope measuring, pre-amplified, column, foot brake, for weighing bridge, digital, load limiters.

Mounting kits for load cellsFor all load cells, LAUMAS is able to provide suitable weigh modules, with the aim of obtaining the correct application of the cell and maximum reliability and accuracy, and compatibly with the mechanical, electrical and pneumatic connections present on the weighing structure.

Production of load cells on CUSTOMER’S REQUEST

LAUMAS designs and manufactures “CUSTOM” load cells to offer the best solutions to customer needs. Customizations are designed to solve specific problems or meet particular needs of applications in special conditions.

• Pre-amplified load cells• Biaxial and triaxial• Two strain gauges Wheatstone bridges• Torque detection• Special cables high / low temperature with

non-standard thermal compensation

Load cells and mounting kits

Certifications

OIML R60 - International Organization of Legal Metrology

ATEX/IECEx - Directive 2014/34/EU - for use in potentially explosive atmosphere

NTEP - compliant to the metrological standards of United States and Canada

EAC - conforme aux normes de l’Union Douanière Eurasienne (Russie, Biélorussie, Kazakhstan)

IP69K - watertight protection against dust and water

Calibration report (ACCREDIA LAT traceability)

3

4

4/5

5

6

6

7

7

8

8

8

9

9

9

9

10

10

10

11

11

11/12

12

13/14

14

LOAD CELLS

SINGLE POINT

BENDING BEAM

SHEAR BEAM

DOUBLE SHEAR BEAM


COLUMN


TENSION (COMPRESSION)

TENSION

PIN

FOR FOOT BRAKE

ANCHOR

WIRE ROPE MEASURING

MOUNTING KITS FOR LOAD CELLS

for SINGLE POINT load cells

for BENDING BEAM load cells

for SHEAR BEAM load cells

for DOUBLE SHEAR BEAM load cells

for COMPRESSION-LOW PROFILE load cells

for COLUMN load cells

COMPLEMENTARY ACCESSORIES FOR LOAD CELLS

LEVEL MEASUREMENTS - FALSE CELLS

4

5, 15, 50

0.25, 0.5, 1

3, 5, 6, 10, 15, 20, 30, 50

6, 15, 30, 50

3, 6, 15

30, 50

10, 15, 20, 30, 50, 100

10, 20, 50

100, 200, 300, 500

10, 30, 50, 100, 200

30, 50, 75, 100, 150

60, 100, 150, 200, 300

150 x 150 mm

200 x 200 mm

250 x 350 mm

350 x 350 mm

250 x 400 mm

400 x 600 mm

400 x 400 mm

400 x 400 mm

800 x 800 mm

400 x 400 mm

400 x 400 mm

400 x 400 mm

IP65

IP65

IP65

IP67

IP65

IP65

IP68

IP67

IP67

IP65

≤ ±0.05%

3 mV/V ±5%

≤ ±0.03%

1-2 mV/V ±15%

≤ ±0.02%(0.017% C4; 0.014% C5)

2 mV/V ±10%

≤ ±0.02%

2 mV/V ±10%

≤ ±0.02%

2 mV/V ±10%

≤ ±0.02%(0.017% C4)

2 mV/V ±10%

≤ ±0.02%(0.017% C4)

2 mV/V ±10%

≤ ±0.03%

2 mV/V ±10%

≤ ±0.02%

2 mV/V ±10%

≤ ±0.02%(0.017% C4; 0.014% C5)

2 mV/V ±5%

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

AFAS

ALL

PRC

AUAZ

LAZ

SPT

CAM

AZLI

-

LOAD CELLS

SINGLE POINT

Special steel

Aluminum alloy

Aluminum alloy

AISI 420stainless steel

Aluminum alloy

Aluminum alloy

17-4 PHstainless steel



Aluminum alloy

for capacities:15, 20, 30, 50 kg

for capacities:10, 20, 50 kg

IP69K: Declaration of conformity + IP69K marking protection rating

Stainless steel + rubber waterproof kit

CAPACITY kg PLATFORM

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT

OIML R60CERTIFICATION

OPTIONSON REQUEST

KIT

page 10page 14

page 10

page 10page 14

page 10page 14

page 14

page 14

For all models on request: II 1GD (zone 0-1-2-20-21-22) -

5

50, 100, 150, 200, 300, 500

75, 150, 300, 500

600 x 600 mm

600 x 600 mm

IP65

IP67

≤ ±0.02%(0.017% C4)

2 mV/V ±10%

≤ ±0.02%

2 mV/V ±10%-

500, 1000

1000, 2000

800 x 800 mm

1200 x 1200 mm

IP65

IP65

≤ ±0.02%

2 mV/V ±10%

≤ ±0.02%

2 mV/V ±10%

- -

-

-

-

-

APL

PEC

ARAT

L

5, 10

20, 50, 100, 200, 350, 500

30, 50, 75, 150, 300, 500

50, 75, 150, 300

75, 150, 300

75, 150, 300

IP68

IP68

IP68

IP68

IP67

IP67

≤ ±0.02%

2 mV/V ±1%

≤ ±0.02%(0.017% C4)

2 mV/V ±1%

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.017%

2 mV/V ±0.1%

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.02%

2 mV/V ±0.4%

-

-

-

-

-

-

-

-

FCK

FCOL

FCAX

FCAL

FTP

FTK

LOAD CELLS

SINGLE POINT

CAPACITY kg PLATFORM

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT

Aluminum alloy


Aluminum alloy

Aluminum alloy


for capacities:150, 200,300, 500 kg page 14

page 14

BENDING BEAM

CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT






Special steel

for capacitiesfrom 50 to 500 kg

page 10page 13page 14







6

500, 1000, 2000, 3000, 5000

500, 1000, 2000

500, 1000, 1500, 2000, 3000, 5000

300, 500, 1000, 2000

500, 1000, 2000, 5000

500, 1000, 2000, 5000, 7500, 10000

750, 1000, 1500

500, 750, 1000, 1200, 1500, 2000, 3000, 5000, 10000

5000, 10000

25000

IP68

IP68

IP67

IP68

IP67

IP68

IP68

IP68

IP68

IP68

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.02%(0.017% C4;0.014% C5)

3 mV/V ±0.4%

≤ ±0.017%

2 mV/V ±0.1%

≤ ±0.02%

3 mV/V ±0.4%

≤ ±0.02%(0.017% C4)

2 mV/V ±0.4%

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.02%

2 mV/V ±0.4%

≤ ±0.1%

1 mV/V ±0.5%

≤ ±0.02%

2 mV/V ±0.2%

-

-

-

-

-

-

-

-

-

-

-

-

FTK

FT-P

FTKL

FTL

FTZ

FTZA

FCAX

FTP

FTH

DTL

LOAD CELLS

SHEAR BEAM

DOUBLE SHEAR BEAM

CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT

Special steel


Special steel






Special steel

Special steel

capacities from1000 to 5000 kg

IP69K: Declaration of conformity + IP69K marking protection rating




Suitable for on-board vehicle weighing






page 11page 14




7

15000, 25000, 50000

COK-AR 25000

25000

30000, 60000

30000

IP68

IP68

IP68

IP68

≤ ±0.02%

2 mV/V ±0.1%

≤ ±0.017%

2 mV/V ±0.1%

≤ ±0.013%

2 mV/V ±0.1%

≤ ±0.013%

200000 ±0.05% counts (RS485)

-

-

-

-

COK

COCO

LCO

LD

200, 500, 1000, 2500

1000, 2000, 5000

250, 500, 1000, 2500, 5000, 7500, 10000, 12500, 15000, 30000, 50000, 100000

15000, 30000, 50000

200000, 300000, 500000, 750000

IP67

IP68

IP68

IP68

IP68

≤ ±0.5%

1 mV/V ±10%

≤ ±0.03%

2 mV/V ±0.4%

≤ ±0.03%(0.02% C3)

2 mV/V ±0.1%

≤ ±0.035%

2 mV/V ±0.1%

≤ ±0.10%

2 mV/V ±0.1%

-

-

-

-

-

-

-CKCL

SCB

XCB

LSCB

L

LOAD CELLS

COLUMN

Special steel




anti rat cable

page 11page 12

page 12

page 11page 12

page 11page 12


CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT







• 10 m long cable version.• Calibration report (ACCREDIA LAT

traceability).• Two redundant strain gauges

Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.

• AISI 420 stainless steel version (not OIML approved).

• IP69K: Declaration of conformity + IP69K marking protection rating

• Calibration report (ACCREDIA LAT traceability).

• Two redundant strain gauges Wheatstone bridges (350 Ω) with two output cables; for dual safety systems.




page 11page 13

page 12page 14

page 12page 14

page 14


8

15, 30, 60

25, 100, 200, 300, 500, 1000, 2500

500, 1000, 2500, 5000

50, 100, 200, 300

100, 200, 300, 500, 1000, 2500, 5000, 7500, 10000, 12500

5000, 10000, 20000

30000, 40000, 50000, 60000, 100000, 250000

2000, 5000, 10000*, 20000*

500, 1000, 2000, 5000, 10000, 20000, 30000, 60000, 100000*, 150000*, 200000*

IP65

IP67

IP67

IP68

IP68

IP68

IP67

IP68IP67*

≤ ±0.02%

2 mV/V ±10%

≤ ±0.02%(0.017% C4)

2 mV/V ±0.2%

≤ ±0.03%

2 mV/V ±0.4%

≤ ±0.02%

2 mV/V ±0.1%

≤ ±0.03%

2 mV/V ±0.1%

≤ ±0.08%

1.0 mV/V ±0.1%

≤ ±0.05%≤ ±0.1% *

2 mV/V ±0.3%

≤ ±0.05%

2 mV/V ±0.3%

-

-

-

-

-

-

-

-

-

-

-

-

SASL

CTOL

CTL

TAL

CLCL

KTB

T

LOAD CELLS

TENSION (COMPRESSION)

TENSION


CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT

Special steel

Special steel





Special steel





Can also be used as load limiter for lifting equipment




• IP69K: Declaration of conformity + IP69K marking protection rating.







page 13

page 13

page 13

page 13


9

5000, 10000, 20000

100

30000, 50000, 75000, 100000, 125000, 150000, 180000, 250000

20004000100002000040000

IP67

IP65

IP68

IP67

≤ ±0.1%

1 mV/V ±0.1%

≤ ±0.08%

1 mV/V ±0.2%

≤ ±0.1%

2 mV/V ±0.1%

3 mV/V ±0.1%

-

-

-

- -

-

-

-

6-1410-1816-2624-3624-36

LAU

LPED

CAFU

N

LOAD CELLS

PIN

FOR FOOT BRAKE

ANCHOR

WIRE ROPE MEASURING

CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KIT


Aluminum


Special steel


Suitable as load limiter for lifting equipment







Switching accuracy ±2% on Full Scale

page 14

CAPACITY kg

MATERIAL

PROTECTIONRATING

COMBINED ERROR

RATED OUTPUT


OPTIONSON REQUEST

KITROPE Ø mm

10

T8-AZLIT8-AZLT8-AZST8-AM

AZL, AZLI, AZS, AM

TFC-GP

TFC-FSB

TFC-PVTFC-PV10

FCK, FCOL

FCK, FCOL

FCK, FCOL

TF-PVTF-PVZ

TF-PV-2000

FCALFCAX: 30÷500 kg

FCALFCAX: 30÷500 kgFCAX: 750÷1000 kg

FCAL

FCAX: 30÷500 kg

FCAL

FCAX: 30÷500 kg

FCALFCAX: 30÷500 kg

FCALFCAX: 30÷500 kgFCAX: 750÷1500 kg

FCAL

FCAX: 30÷500 kg

FCAX: 750÷1500 kg

TF-FSB

TF-AST

T12-FCA-GP

TF-GP

TF-GP-2000

T12-FTA-GP

FTL, FTKL, FT-P, FTZ

FTK: 75÷300 kgFTK: 500÷2000 kg

FTP: 75÷300 kgFTP: 500÷2000 kg


for SINGLE POINT load cells

for BENDING BEAM load cells

MODELAPPLICATIONRANGE

DESCRIPTION FOR LOAD CELLS

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in galvanized steel; constraint against lateral forces and anti-tilt by self-centring galvanized steel joint foot; adjustable height.

Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.

Mounting kit provided with compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in AISI 304 stainless steel; constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel (TF-PV, TF-PV-2000) or in galvanized steel (TF-PVZ); limited height adjustment.

Mounting kit provided with compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.

Mounting kit provided with tension ball joint in aluminum alloy; lower plate and block in AISI 304 stainless steel; galvanized screws.

Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate, block and screws in galvanized steel.

Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate, block and screws in galvanized steel.

Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber; lower plate and block in AISI 304 stainless steel.

B

B

B

B

BS

BS

B

S

BS

BS

from 10 to 300 kg

from 5 to 500 kg

from 5 to 500 kg

from 5 to 200 kg

from 30 to 500 kg

from 30 to 1000 kg

from 30 to 500 kg

from 30 to 500 kg

from 30 to 500 kg

from 30 to 1500 kg

from 30 to 1500 kg

from 75 to 2000 kg

B = bending beam load cell; S = shear beam load cell

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); lower plate and block in AISI 304 stainless steel; constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.

11

PVPVZ

TF-PS 2000

PV80

PV80Z

PS

PS10T

VCOKDTL

TF500

TF2000TF2000Z

10000 kg

FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500 kgFTP: 75÷300 kgFTP: 500 kg

FTL, FTKL, FT-P, FTZFTK: 75÷300 kgFTK: 500÷2000 kgFTP: 75÷300 kgFTP: 500÷2000 kg



FTP: 3000÷5000 kgFTZ: 5000 kg

FTP: 3000÷5000 kgFTK: 3000÷5000 kgFTZ: 5000 kg

FTK: 3000÷5000 kg

FTP: 10000 kg

DTL

COLCOLDCOK

PVCLS

PV80CLS

PSCLS

5000 kg

5000 kg

CLS: 1000÷2000 kg

CLS: 5000 kg

CLS: 5000 kg


for SHEAR BEAM load cells

for DOUBLE SHEAR BEAM load cells



Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.

Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts.

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV80); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.PV80: lower plate and block in AISI 304 stainless steelPV80Z: lower plate and block in galvanized steel

Hot worked galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.


Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV80); constraint against lateral forces and anti-tilt by self-centring joint foot in stainless steel; adjustable height.

Hot worked galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; constraint against lateral forces and anti-tilt by ball joint; adjustable height.

from 1000to 2000 kg

from 75 to 2000 kg

from 75 to 2000 kg

from 75 to 2000 kg

from 3000to 5000 kg

from 3000to 5000 kg

from 15000to 50000 kg

from 75 to 500 kgBSBS

S

S

S

SS

BSBS

BSBS

BSBS

B = bending beam load cell; S = shear beam load cell

Mounting kit provided with upper plate with a compression joint in AISI 304 stainless steel and rubber.TF500: lower plate, block and screws in AISI 304 stainless steelTF2000: lower plate, block and screws in AISI 304 stainless steelTF2000Z: lower plate, block and screws in galvanized steel

Mounting kit provided with adjustable upper plate in AISI 304 stainless steel (PPV); constraint against lateral forces and anti-tilt by self-centring joint foot; adjustable height.PV: lower plate, block and foot in stainless steelPVZ: lower plate, block and foot in galvanized steel

12

KIT_COK

KIT_COL

KIT_CO

PIA_CO25000 kg

COKCOK-AR

COLCOLD

CO

V15000

V30000

V100000

P10000+BASESUP

BASEINF+BASESUP

PIASTRA+BASEINF

CBL: 15000 kg*CBX: 30000 kg

CBL: 30000 kg*CBX: 50000 kg

CBL: 50000÷100000 kg*CBX: 50000 kg

CBL: 250÷12500 kg

CBX: 15000 kg

CBL: 250÷12500 kg

CBX: 15000 kg

CBL: 250÷12500 kg

CBX: 15000 kg

V10000V10275

CBL: 250÷12500 kg

CBX: 15000 kg



for COLUMN load cells



Mounting kit composed by protective rubber seal, 2 bases (upper and lower) and 3 self-centring cylindrical plates.KIT_COK: special steelKIT_COL: AISI 420 hardened steel

Kit composed by 2 stainless steel bases.

Kit composed by 2 special steel plates (upper and lower) for KIT_CO bases.

Lower plate and turned upper base in AISI 304 stainless steel.

Turned upper and lower bases in AISI 304 stainless steel.

Lower plate and turned lower base in AISI 304 stainless steel.

AISI 304 stainless steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; laminas against lateral forces, anti-tilt and jack functions.

from 15000to 30000 kg

from 30000to 50000 kg

from 50000to 100000 kg

from 250to 15000 kg

from 250to 15000 kg

from 250to 15000 kg

from 15000to 50000 kg

from 30000to 60000 kg

AISI 304 stainless steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrations caused by moving parts; laminas against lateral forces, anti-tilt and jack functions.

from 250to 15000 kg

* with adapter (page 14)

13

PIEDINOSB2M8PIEDINOSB2M10PIEDINOSB2INOXPIEDINOSB2M20PIEDINOSB2ZNCM8PIEDINOSB2ZNCM10PIEDINOSB2ZNCPIEDINOSB2ZNCM20

SNODOGE12AX

SNODOGE20AXKIT

ACCSFERM12

PPV

ANTIV35ANTIV40ANTIV45

ACCSFERM20

PPV80

SNODOGE25AXKIT

M8 x 1.25 mm max 500 kgM10 x 1.50 mm max 500 kgM12 x 1.75 mm max 2000 kgM20 x 2.50 mm max 5000 kgM8 x 1.25 mm max 500 kgM10 x 1.50 mm max 500 kgM12 x 1.75 mm max 2000 kgM20 x 2.50 mm max 5000 kg

M12 x 1.75 mm

M20 x 2.50 mm

FCAL, FCAX, FCOL, FTK, FTKL, FTL, FTP, FT-P, FTZ

CLS, FTK, FTKL, FTL, FTP, FT-P, FTZ

FTKL, FTL, FTP, FT-P, FTK, FTZ, CLS

FTK, FTKL, FTL, FTP, FT-P, FTZ

FCOL, FCKFTKL, FTL, FCAL, FCAX, FTP, FT-P, FTK, FTZ CLSFCAL, FCAX

CLS 5000 kg, FTK 3000-5000 kg, FTKL,FTZ 5000 kg

FTK, FTKL, FTP 3000-5000 kg,FTZ 5000 kg, CLS 5000 kg

FTK, FTP, FTZ

FTP 10000 kg

EM6EM8EM10EM12EM16

M6 x 1.00 mmM8 x 1.25 mmM10 x 1.50 mmM12 x 1.75 mmM16 x 2.00 mm

SASLSLSL, CTOL, CTLCTOL, CTL

EM20EM25EM30EM35

M20 x 1.50 mmM24 x 2.00 mmM30 x 2.00 mmM36 x 3.00 mm

SL, CTOL, CTLCTOL, CTLCTLCTL

COMPLEMENTARY ACCESSORIES FOR LOAD CELLS

Self-centring joint foot

Spherical plain thrust bearings to compensate for misalignment

Ball-and-socket joint

Accessory with ball

Adjustable upper plate

Compression joint

MODEL DESCRIPTION

MODEL MODELDESCRIPTION DESCRIPTION

FOR LOAD CELLS

FOR LOAD CELLS FOR LOAD CELLS

Steel joint.

Kit composed by steel joint + galvanized bolt (20x80 mm) and washer (22x60 mm).

Kit composed by steel joint + galvanized bolt (24x100 mm) and washer (26x72 mm).

stainless steelstainless steelstainless steelstainless steelgalvanized steelgalvanized steelgalvanized steelgalvanized steel

stainless steel / max static load 2000 kg

AISI 304 stainless steel plates for self-centring joint foot.

Stainless steel + rubber joints, to compensate for misalignment of the support plates:

Ø25x63 mm; M8 x 1.25 mm; max static load 500 kg



stainless steel / max static load 5000 kg

14

ALL

AZS, PRC

AZL, AM

APL

PEC

FCK, FCOLFCAX, FCAL

DTL

AM, APL

CA

BLOCPRC

BLOCT8Z

BLOCAPL

BLOCPEC

STAFFE -FC/FCA

PIATTODTL

CBL250-10000 - CBX15000CBL15000 - CBX3000CBL30000 - CBX5000CBL50000-100000

FCAL-FCAXFCK-FCOLFTK75-2000FTP75-2000FTL300-2000FTZ500-2000FTK3000-5000FTP3000-5000

-

-

CBLCBX

CBL: 15000 kgCBX: 30000 kgCBL: 30000 kgCBX: 50000 kgCBL: 50000÷ 100000 kg

CBX: 15000 kg

CBX: 30000 kg

CBX: 50000 kg

TENDITORE300

PTEND

STAFFEALL

IP68 -AM/APL

BASESUPFIL

BINF100

BINF126

BINF165

ADAT100CBX15T

ADAT126CBX30T

ADAT165CBX50T

BOTTONE200

BOTTONE

BOTTONE750

PIAS50CASUPPIAS75CASUPPIAS120CASUPPIAS165CASUPPIAS225CASUP

PIAS50CAINFPIAS75CAINFPIAS120CAINFPIAS165CAINFPIAS225CAINF

Ø110x22 mm

Ø140x23 mm

Ø180x23 mm

Ø100x6 mm

Ø126x9 mm

Ø165x29 mm

Ø98x25 mmØ98x27.5 mmØ150x27.5 mmØ199x30 mmØ250x30 mm

Ø170x25 mmØ170x25 mmØ240x30 mmØ290x30 mmØ330x35 mm

F

F F

F

C C

F

F

C

CML

CBLS: 500000÷ 750000 kg

CBLS: 300000 kg

CBLS: 200000 kg

Pair of tension stainless steel brackets (max 50 kg)

Stainless steel drawn block31x30 mm; tickness 10 mm

Galvanized steel drawn block36x35 mm; tickness 10 mm

Stainless steel drawn block60x43 mm; tickness 5 mm

Stainless steel drawn block50x32.5 mm; tickness 5 mm

Pair of tension stainless steel brackets:max static load: 100 kgmax static load: 300 kg

Galvanized steel plate210x80 mm; tickness 12 mm

Upper plate

Galvanized steel upper / lower plate for load distribution

LEVEL MEASUREMENTS - FALSE CELLSCAPACITY kg MATERIAL DESCRIPTION

Stainless steel

“False cells” (ML) are structural mechanical steel elements that can be used in combination with the load cells for measuring the level of liquid or weighing powder products that do not require a high degree of precision. False cells feature similar dimensions to the load cells and can be mounted on the same accessories as the latter.

- Structure with 3-point support = 1 load cell + 2 false cells- Structure with 4-point support = 2 load cells + 2 false cells

Galvanized steelSignal mV x 3 Signal mV x 2 Signal mV x 2

C = SUPPORT FOOT WITH LOAD CELLF = SUPPORT FOOT WITH FALSE CELL


MODEL / DESCRIPTION MODEL / DESCRIPTIONFOR LOAD CELLS FOR LOAD CELLS

Galvanized steel stay rod with dual ball-and-socket joints suitable for static applications, to be placed horizontally.Working load: 2500 kgBreaking load: 10000 kg

Threaded upper base in AISI 304 stainless steel for compression load cells

Galvanized steel anchor plate for TENDITORE300

Turned lower base in AISI 304 stainless steel for compression load cells:

AISI 304 stainless steel adapter for mounting kits:V15000, V30000, V100000.

Ø119 mm; tickness 60 mm



15

www.laumas.com

By scanning the QR code, you can access directly with your smartphone or tablet to our web site where consult the items on catalog and find the information; it’s also possible discover the full range of Laumas products.

The application is available for free on the Apple App Store (iOS), Google Play (Android), Windows Phone or Blackberry App World Store.

JUNCTION BOXES

Stainless steel or ABS junction boxes, including equalization boards or parallel connection boards, to connect from 1 to 4 or from 5 to 8 load cells.IP67 protection rating.Lightning and electrical shock protection versions.ATEX II 1GD certified versions.

Watch the presentation video of each product.

PRODUCT VIDEOS on www.laumas.com

w w w . l a u m a s . c o mLAUMAS ELETTRONICA SRLVIA I MAGGIO N. 643022 MONTECHIARUGOLO (PR) - ITALY

PHONE (+39) 0521 683124FAX (+39) 0521 681091

EXPORT SALES DEPARTMENT: [email protected] follow us

Documents

LOAD CELLS AND MOUNTING KITS - Optima Weightechoptimaweightech.com.au/ClientContent/Upload/FullCatalog/Load_cell… · output cables; for dual safety systems. • Calibration report