PSAgS gegen die thermischen Auswirkungen von Störlichtbögen · - with integrated Concepthard hat, ANSI / ISEA Z89.12009 Type 1 Class E, and EUSlotbracket - with ventilation system

PSAgS gegen die thermischen Auswirkungen von Störlichtbögen

ArcFlashPPE,Level3,ATPV≥25cal/cm²Open Arc Test Method

Katalog 2017

Technologie der Visierscheiben fur Gesichtsschutz und Hauben - Technology of visors for face shields and hoods

Die BSD Real View Technology ist eine spezielle Beschich-tungstechnologie des Polycarbonat-Trägermaterials liefert einzigartige optische Eigenschaften und reflektiert die Wär-mestrahlung.

■ Keine Farbe im Visier ■ Realistische Farb-Wiedergabe > 95 %

Bei der täglichen Benutzung erfolgt fast keine Absorption von Lichtbestandteilen durch die Visierscheibe.

■ Keine optische Alterung ■ Lange Lebensdauer, die Tragedauer ist kein Aussonde-

rungskriterium

Special coating technology of the polycarbonate carrier pro-vides unique optical properties and reflects thermal radiation.

■ No colour in the visor ■ Realistic colour reproduction > 95 %

During daily use there is no absorption of light components by the visor.

■ No optical aging of the visor ■ Long life, time is no weed out criteria

Schutz durch Reflexion - Protection by reflection

Beim Absorptionsprinzip werden Polycarbonat-Scheiben mit speziellen farbigen Zusätzen vermischt, die Wärmestrahlung (IR- und UV-Licht) absorbieren.

■ Gelbes oder grunes Visier ■ Der Farbwiedergabindex ist deutlich reduziert.

Bei der täglichen Nutzung wird Sonnen- und Umgebungslicht von der Visierscheibe ständig absorbiert und darin gespei-chert.

■ Die Visierscheibe altert. ■ Sie muss nach einer Frist ausgesondert werden.

Polycarbonate lenses working with absorption principles are mixed with special colour additives that absorb the thermal radition (IR and UV).

■ Yellow or green visor ■ The colour rendering index is significantly reduced.

Daily sunlight and ambient light are constantly absorbed and stored by the visor.

■ The visor is aging. ■ They must be sorted out after a period of time.

Schutz durch Absorption - Protection by absorption

Das Diagramm zeigt das Absorptionsverhalten von Ge-sichtsschutzvisieren in verschiedenen Wellenlängenbereichen des Lichts. Mit der von BSD verwendeten Technologie wird im sichtbaren Spektrum des Tageslichts kaum absorbiert. Bei Wettbewerbsprodukten, die auf die Absorptionstechno-logie setzen, erfolgt auch in diesem normalen Lichtspektrum eine permanente, hohe Absorption. Das Visier altert.

The graph shows the absorption behaviour of visors in diffe-rent wavebands of light. The visible spectrum of daylight is hardly absorbed with the technology used by BSD.Competitor products that rely on absorption technology, have a permanet high absorption even in the normal spec-trum of light. The visor is aging.

Die Scheibe macht den Unterschied! The lense makes the difference!

Gesichtschutz mit farbiger ScheibeFace Shield with coloured lense

Real View Technology

Visier mit - Face shield with

Arc flash PPE - HRC 3

BSD arc flash software

Software is based on the calculation algorithm of the DGUV-I 203-077 for three-phaseinstallation. Conversational menu guidance and database-assisted preselection ofdifferent parameters for less experienced users. Short circuit current calculation forsimple radial system according to DIN VDE 0102. Supports calculation of the arcenergy, if the necessary short circuit current value doesnt exist. You can choosebetween a simple and exactly calculation method.The simple method allows a small amount of specific system knowledge, works thereforwith higher security additions. Exactly method is more complex, therefor certain securityadditons can be reduced. This can reveal different results, for the exactly method can bearc protection class 1 enough but the simple method could claim class 2.

Special software functions:- selection menus- types of system- protection characteristic lines- system parameter- integrated digital characteristic curves from over 600 NH- and HH-fuses- generation of system labelling (Arc Label)- extended range of functions of the short-current calculation

Values can be saved project-related.Results in form representation.Saving in different file types.

If required, the PPE can be combined, based on the calculation result,in a separate part of the software. The result of your calculation will beshown as integral component of a risk assessment.Besides the arc energy, the required test level of the PPE against electric arcwill be shown as:- protection class 1 (158 kJ)- protection class 2 (318 kJ)- XXX (concrete value in kJ)

Based on the calculation result, you get suggestion for appropriate certificatedPPE against electric arcs, even if they are above class 2, W(LBP) > 320 kJ.

System requirements:- Windows 7 or 8

Description Material number

BSD electric arc - software 4999999

arc flash face shield "BSD-ErgoS 2Power" HRC 3, 26.0 cal/m²

- arc flash faceshield of the latest generation, light, transparent chin protection,perfect weight balance for the helmet

- arc flash tested according to ASTM F2178, ATPV: 26.0 cal/cm²- EN 166, "personal eye-protection requirement"- ANSI / ISEA Z87.1 - 2015- true color visor, through not tinted visor > 95%- visor has no aging- universal-bracket matching on common electrian hard hats- slot-bracket suitable for all hard hats with 30 mm Euro-slots- brackets for other hard hats on request


electrician face shield ErgoS 2Power, HRC 3, 26 cal/cm², universal-bracket 7406510

electrician face shield ErgoS 2Power, HRC 3, 26 cal/cm², EU-slot-bracket 7406520

electrician face shield ErgoS 2Power, HRC 3, 26 cal/cm², US-slot-bracket 7406530

www.bsd-dresden.de 279Seite

arc flash face shield "BSD-ErgoS Power" HRC 3, 26.0 cal/cm²

- *) arc flash tested in combination with Balaclava item-no. 7406480according to ASTM F2178, ATPV: 26.0 cal/cm²

- EN 166, "personal eye-protection requirement"- ANSI / ISEA Z87.1 - 2015- true color visor, through not tinted visor > 95%- visor has no aging- universal-bracket matching on common electrian hard hats- slot-bracket suitable for all hard hats with 30 mm Euro-slots- brackets for other hard hats on request


electrician face shield ErgoS Power, HRC 3, 26.0 cal/cm² *), universal-bracket 7406410

electrician face shield ErgoS Power, HRC 3, 26.0 cal/cm² *), EU-slot-bracket 7406420

visor for ErgoS Power with universal-brackt 7406402

visor for ErgoS Power with slot-bracket 7406403

arc flash balaclava, 34.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 34.0 cal/cm²- for wearing under face shields- for a higher arc flash protection of the head- double layer fabric: 7.8 oz/yd²- univeral-size- color: darkblue


Balaclava, 34.0 cal/cm² 7406480

electrician hard hat

- thermoplastic hard hat- straight hard hat shell with rain-gutter- extreme lateral rigidity- side mounting option. e.g. for helmet lamp- available in yellow, white and red- 1000 V AC- wear life 4 years- DIN EN 50365- with rotatable fastener for individual size adjustment- at request your company emblem can be applied on the hard hat


electrician hard hat yellow 1000 V 7404000

electrician hard hat white 1000 V 7404001

electrician hard hat red 1000 V 7404002


chin strap

- fitting to electrican helmet 7 404 000, -001, -002- out of textile band with comfortable snap closing- as 2- or 4-point construction


chin straps, with 2-point fastener 7490000

chin strap 20 mm black with 4-point fastener 7491001

headlamp for "BSD-ErgoS" face shields

- fitting to electrican helmet 7 404 000, -001, -002- out of textile band with comfortable snap closing- as 2- or 4-point construction


forehead lamp for ErgoS 7404500

hard hat lamp

- high-power LED-light out of shock resistant and waterproof case- 3 watt Cree-LED, ca. 7000 Kelvin colour temperature- up to 150 m light range- very long service life1 1,0 Stck. 010011 : lamp holder


Power LED helmet lamp with bracket, for ATEX zone 1 7404200


arc flash BSD hood Plus, HRC 3, 25.0 cal/cm²

The arc flash BSD Hood permits the user to work at live parts or in the vicinity of live parts without requirements for head protection (falling objects).

- arc flashl tested according to ASTM F2178, ATPV: 25.0 cal/cm²- arc flashl tested according to DGUV GS-ET-29, class 2 318 kJ- additional arc flashl tested with a higher test level W(LBP)= 630 kJ- EN 166 8, "personal eye-protection requirement"- back of the head is protected against thermal dangers of an electric arc

through embedded neck protection- true color visor- visor has no aging- approved for live working- color royal/navy blue- classification on visor- universal-size


BSD arc flash hood plus, HRC 3, 25.0 cal/cm² with neck guard 7406970

visor for BSD arc protection hood 395 kJ / 630 kJ 7406920

storage-bag for BSD arc protection hood 7406950

lamp for arc flash BSD hood Plus

- mounted via special fastening on the peak of the hood- low weight 85g- powerful LEDs, with 4 power levels- light ON time ca. 200 h- luminous flux 100 Lumen


lamp with special holder for BSD arc protection hood 7404400

bump cap for arc flash BSD hood Plus

- can be added as impact protection to the arc protection hood- protection against impact injury category 1


bump cap for BSD arc protection hood 7406945


neck protection for arc flash BSD hood Plus

- added via hook and loop fastener to back part of the hood- therefore all round protection of the head against the thermal dangers of the electric arc


neck protection for BSD arc protection hood 7406940

arc flash hood "BSD-Classic" HRC 3, 28.0 cal/cm²

The arc flash BSD Hood permits the user to work at live parts or in the vicinity of live parts.

- arc flash tested according to ASTM F2178, ATPV: 28.0 cal/cm²- also certificared to ASTM F1506, CSA Z462, OSHA 1910.269- true color visor- visor has no aging- approved for live working- with integrated hard hat and bracket- fabric double layer, 350 g/m² (10 oz.yd2) per Layer: cotton, antistatic- color navyblue- universal-size


BSD arc protection hood HRC 3, 28.0 cal/cm² 7406985

visor for ErgoS Hood HRC 3, 28.0 cal/cm² 7406984


arc flash hood "BSD-Classic" HRC 3, 28.0 cal/cm² with ventilation

The arc flash BSD Hood permits the user to work at live parts or in the vicinity of live parts.

- arc flash tested according to ASTM F2178, ATPV: 28.0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- true color visor- visor has no aging- approved for live working- fabric double layer, 350 g/m² (10 oz/yd2) per Layer: cotton, antistatic- with integrated Concept-hard hat, ANSI / ISEA Z89.1-2009 Type 1 Class E,

and EU-Slot-bracket- with ventilation system for a air circulation inside the hood- supply unit with belt-strap- color navyblue- universal-size


BSD arc protection hood HRC 3, 28.0 cal/cm², with ventilation system 7406983

power unit for ventilation system, incl. charger 7406987

hard hat with air duct 7406988

heavy duty pvc hose 7406989

arc flash BSD gloves, HRC 3, 31.0 cal/cm²

- arc flash tested according to IEC 61482-1-1: ATPV 31 cal/cm²- arc flash tested according to IEC 61482-1-2:2007 class 2

test level W(LBP)= 318 kJ- additional tested with a higher tesl leve W(LBP)= 395 kJ- protection against mechanic risks according to EN 388:2003- protection against thermal risks according to EN 407:2004- back side of glove made of double-textile- perfect fit via soft and flexible leather- excellent delicacy of feeling- no perspiration


BSD arc flash gloves, class 2, 395 kJ, HRC 3, 31.0 cal/cm², size: 8 4650308






arc flash jacket "BSD-Classic" HRC 3, 28.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 28,0 cal/cm²- also certificated according to CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- embroidered signs with class specification on the collar- double layer fabric:

outer layer 350 g/m² (10 oz/yd2): cotton, carboninner layer 250 g/m² (7.4 oz/yd2): cotton, polyamid, carbon

- color: navyblue


BSD jacket HRC 3, 28.0 cal/cm², size: S 4655080

BSD jacket HRC 3, 28.0 cal/cm², size: M 4655081

BSD jacket HRC 3, 28.0 cal/cm², size: L 4655082

BSD jacket HRC 3, 28.0 cal/cm², size: XL 4655083

BSD jacket HRC 3, 28.0 cal/cm², size: XXL 4655084

BSD jacket HRC 3, 28.0 cal/cm², size: XXXL 4655085

arc flash bib overall "BSD-Classic" HRC 3, 28.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 28,0 cal/cm²- also certificated according to CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- embroidered signs with class specification on left leg- double layer fabric:


- color: navyblue


BSD bib overall HRC 3, 28.0 cal/cm², size: S 4655090

BSD bib overall HRC 3, 28.0 cal/cm², size: M 4655091

BSD bib overall HRC 3, 28.0 cal/cm², size: L 4655092

BSD bib overall HRC 3, 28.0 cal/cm², size: XL 4655093

BSD bib overall HRC 3, 28.0 cal/cm², size: XXL 4655094

BSD bib overall HRC 3, 28.0 cal/cm², size: 3XL 4655095


arc flash kit "BSD-Classic" HRC 3, 28.0 cal/cm²

Kit-HRC 3 consists of:

- 1 pce arc flash hood HRC 3- 1 pce arc flash jacket HRC 3- 1 pce arc flash dungarees HRC 3- 1 pair arc flash gloves HRC 3- 1 pce storage bag

- arc flash hood with integrated hard hat and bracket tested according toASTM F2178, ATPV: 28.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 28,0 cal/cm²- arc flash tested according to CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- double layer fabric:


- bag to store or transport the Kit- color: navyblue


KIT HRC 3, 28.0 cal/cm², size: S 4100310

KIT HRC 3, 28.0 cal/cm², size: M 4100311

KIT HRC 3, 28.0 cal/cm², size: L 4100312

KIT HRC 3, 28.0 cal/cm², size: XL 4100313

KIT HRC 3, 28.0 cal/cm², size: XXL 4100314

KIT HRC 3, 28.0 cal/cm², size: XXXL 4100315

arc flash coat "BSD-classic", HRC 3, 37.7 cal/cm²

- arc flash tested according to IEC 61482-1-1: ATPV 37,7 cal/cm²- arc flash tested according to IEC 61482-1-2:2007 class 2

test level W(LBP)= 318 kJ- additional tested with higher test level W(LBP)= 395 kJ- heat and flame protection according to EN ISO 11612:2008

(A1+A2 / B1 / C1 / F1)- welder protection according to EN ISO 11611:2007 (Kl. 1 - A1+A2)- protection against static electricity according to EN 1149-5:2008- front part and sleeves double layered- length: 110 cm- walking slit on the back- identification pictograms at the collar- fabric ca. 350 g/m² double-layered, 88% cotton, 11% polyamide, 1% antistaticcomponent- colour: navy / royal blue


coat, IEC 61482-1-2, class 2, HRC 3, 37.7 cal/cm², size: S 4611042

coat, IEC 61482-1-2, class 2, HRC 3, 37.7 cal/cm², size: M 4611044

coat, IEC 61482-1-2, class 2, HRC 3, 37.7 cal/cm², size: L 4611046

coat, IEC 61482-1-2, class 2, HRC 3, 37.7 cal/cm², size: XL 4611048

coat, IEC 61482-1-2, class 2, HRC 3, 37.7 cal/cm², size: XXL 4611050


Cooling - Vest

The vest works similar to the human body, which stabilizesits temperature by the evaporative of water on the skin.The innovative functionale textile fabric absorbs water.The body and clothing stay dry.The cooling effect is sustained for up to 20 hours, dependingon temperature. The cooling takes place on the level of thestandard temperature distribution. (approx 28-32 °C)

- improving the concentration and capability- raise of productivity- reduces heat-stress and exhaustion- "charging" lasts 1 min, only water is required- the vest can be worn under and above normal clothing,

PPE under the PPE


Cooling Vest, size S, chest measurement: 88 - 95 cm 4630050

Cooling Vest, size M, chest measurement: 96 - 103 cm 4630060

Cooling Vest, size L, chest measurement: 104 - 111 cm 4630070

Cooling Vest, size XL, chest measurement: 112 - 119 cm 4630080

Cooling Vest, size XXL, chest measurement: 120 - 127 cm 4630090

Cooling - Clothes

The cooling clothes works similar to the human body, which stabilizesits temperature by the evaporative of sweat on the skin.The innovative functionale textile fabric absorbs water.The body and clothing stay dry.The cooling effect is sustained for up to 20 hours, dependingon temperature. The cooling takes place on the level of thestandard temperature distribution. (approx 28-32 °C)

- improving the concentration and capability- raise of productivity- reduces heat-stress and exhaustion- "charging" lasts 1 min, only water is required- the clothing can be worn under and above normal clothing,

PPE under the PPE


cooling helmet inlay, standard size, color blue 4630095

cooling bandana, standard size, blue black 4630096

armcooler, standard size, color black 4630097

cooling halterneck, standard size, color black 4630098


High Visibility Vest

- high visibility vest for arc flash and explosion endangered areas- DIN EN ISO 11612 (A/B1/C1)- DIN EN 471 (Class 2/2)- colors bright-orange and yellow- universal size


high visibility vest, bright yellow 4630030

Belt

- arc flash tested- flame-resistant- antistatic- permanently elastic- color: black with embroidered BSD-logo


Belt, PPE against eletric arc, length: 90 cm 4601320





Knee-Pad

- for usage in BSD trousers and BSD dungarees- out of 100 % polyethylene- according to DIN EN 14404 (type 2, power stage 1)


knee pads, grey 4653111


storage bag

- storage bag- to store e.g. helmet, face shield, golves etc.- with cord- colour red- without contents


storage bag for helmet and face shield, 500 x 300 mm 7507600

Storage and Transport bag for KIT and PPE

- bag to store and transport PPE- enough space for face protection, helmet, arc flash clothing

and protective gloves- solid construction- size: 58 cm x 30 cm x 35 cm


storage and transport bag for KIT and PPE 4701001


Documents

PSAgS gegen die thermischen Auswirkungen von Störlichtbögen · - with integrated Concepthard hat, ANSI / ISEA Z89.12009 Type 1 Class E, and EUSlotbracket - with ventilation system