7/30/2019 Prospect TPS 800 (802- 805).pdf

1/6

Leica TPS800 SeriesPowerful, efficient,reliable and intuitive

PinPointTechnology

7/30/2019 Prospect TPS 800 (802- 805).pdf

2/6

Leica TPS800 Performance Series...

Three classes of accuracyTPS800 total stations are available inangular accuracies of 2" (0.6 mgon),3" (1 mgon) and 5" (1.5 mgon). Allmodels feature a minimum reading of 1" .

Electronic Guide LightPractical alignment aids to speed

up staking out. Helps the rodmanto line up the reflector quickly and

exactly on the line of sight.

PIN-codeLock your equipment effectivelyto make it unattractive forbeing stolen.

Dual distance measuringtechnologies

With the TCR range ofinstruments you can select

between two measuringmodes. Choose between

reflectorless measurementto all surfaces, or precise mea-

surement to prisms and tapes atthe press of a button.

Everything at a glanceThe large high resolution display

keeps you informed about allimportant aspects at a glance.

With the alphanumeric keyboardyou can enter numbers, letters

and special characters as quicklyand as easily as you are used to

with your mobile phone.

Endless drivesFaster operation with no moreawkward clamping and loose-ning due to the sliding clutchand endless loop drive.

Laser plummetEasy to centre over a set uppoint thanks to the laser plummet.The intensity of the laser point canbe adjusted step-by-step to maintainvisibility, even in critical lightningconditions. Eliminates the time con-suming task of centering with anoptical plummet.

Fast start-upStart your work quickly by setting apredefined startup sequence, screen

display and instrument settings.

Clear visibilityLeica's precision optic provides

for clear target visibility.

PinPoint-ReflectorlessDistance measurementThe PinPoint technology

enables a reflectorless distance

measurement to any surfaceand an exceptional range of

over 500 m. (ultra- models).

10'000 data blocksThe reliable internal memory of theTPS800 total stations can store10'000 data blocks.

The difference lies inthe little buttonThanks to the trigger key mounted

on the side of the instrument youdo not lose sight of the targetwhile measuring; this is particularlyimportant when a lot of pointsneed to be measured.

powerful

7/30/2019 Prospect TPS 800 (802- 805).pdf

3/6

efficient...with an application for every task

Surveying & OrientationWith the Surveying program,measure-ments of an unlimited number ofpoints is supported. Included are thefunctions of defining the set-up station

and determining the orientation frommeasurements up to five points.

Reference Line and ArcFor setting-out or checking pointsalong a defined line or arc. Orthogonalstakeout elements of the target pointsare calculated in relation to the defi-

ned reference. Reference lines can beshifted with parallel offsets or evenrotated to match predefined setting-out instructions.

Stake OutPoints can be staked from manuallyentered data or from an uploadedfile stored in the instrument memory.3D stakeout elements are calculatedusing the point coordinates and thestation data.

Remote HeightThe position of an inaccessable pointcan be computed by measuring to abase point and then aiming at theremote point. This can be used to

determine the ground clearance ofa structure.

Hidden PointEasily measure points that are notdirectly visible by using a hiddenpoint rod. The length of the rod andthe spacing between the reflectors isconfigurable. The rod can be held atany angle when measured and theprogram calculates the hidden pointas if it were observed directly.

ConstructionThe layout of a construction site canbe defined relative to constructionlines. Points can be staked out relati-veto the selected line. Graphic displaysshow the position of the instrument,prism and stake out point relative tothe construction line.

Tie DistanceTie Distance determines the distance,grade, azimuth and height differencebetween two points. The distancescan be calculated continuously (tra-versing) or from a central point. TheTie Distance between the last twomeasured points can be checkedinstantly while surveying.

Area (3D) & VolumeThis programm calculates the area,volume and perimeter of plan andslope surfaces. The points used canbe measured, entered manually orselected from the instrumentsmemory.

Free StationSet up your instrument anywhere andcalculate station coordinates, elevationand Hz circle orientation. Up to fiveorientation points may be used withany combination of directions anddistances in one or two faces.

On board software and application programs simplify and speed up work in the field. The user isguided through the routines by clear menus and measurement prompts.

7/30/2019 Prospect TPS 800 (802- 805).pdf

4/6

reliableLeica TPS800an overview of the models

COGO Routines (Optional)Coordinate Geometry offers you awide range of calculation functions.These include inverse, traverse, inter-sections using combinations of bearings,distances or lines, offset calculationsand line extensions. Computed coordi-nates can immediately be staked out.

Technical data TPS802 TPS803 TPS805Angle measurements (Hz, V)Method Absolute continuousDisplay resolution 1" (0.1mgon)Standard deviation (ISO 17123-3) 2" (0.6 mgon) 3" (1mgon) 5" (1.5 mgon)TelescopeMagnification 30 x

Field of view 1 30' (26 m at 1 km)Minimum target distance 1.7 mReticle illuminatedCompensatorSystem Electronic 2 axis oil compensatorSetting accuracy 1" 1" 1.5"Distance Measurement on Reflector (IR)Measuring range with circular prism GPR1 3'500 mMeasuring with reflective foil (60 mm x 60 mm) 250 mStandard deviation (ISO 17123-4) (fine/quick/tracking) 2mm + 2ppm/5mm + 2ppm/5mm + 2ppmTime for a measurement (fine/quick/tracking) < 1sec/< 0.5 sec/< 0.15 secPinPoint- Reflectorless Distance measurement (RL)Range: PinPoint R100 (power) 170 m (90 % reflective)(Medium atmospheric conditions) PinPoint R300 (ultra) > 500m (90% reflective)

Laser at GPR circular reflector 7'500 mStandard deviation (ISO 17123-4) 3 mm + 2 ppm/5mm + 2ppm(Normal/Tracking)Time per meas. (Normal/Tracking) typ. 3 s/1 sPoint size at 100 m 12 mm x 40 mmCommunicationInternal data storage 10'000 data blocksInterface RS232Data formats GSI/IDEX/ASCII/dxf/Freely definable formatsOperationDisplay Graphics 160 x 280 pixels,

Alphanumeric 8 lines x 31 charactersLaser plummetType Laser point, brightness adjustable in steps

Accuracy 1.5 mm at 1.5 m instrument heightEnvironmental conditionsTemperature range (operation) -20 C to +50 C (-4 F to +122 F)Dust and splash proof (IEC 60529) IP54Humidity 95 %, non condensingWeightWeight including battery and tribrach 5.4 kgOperating period with GEB121 approx. 6 hoursNumber of distance measurements with GEB121 approx. 9'000

Leica TC802/3/ 5 -Distance Measurement on Reflector (IR)Leica TCR802/3/5 power -Distance Measurement on Reflector (IR)

-PinPoint R100 Reflectorless Distance Measurement (RL)Leica TCR802/3/5 ultra -Distance Measurement on Reflector (IR)

-PinPoint R300 Reflectorless Distance Measurement (RL)

The optional, powerful new Road-works 3D application significantlyextends the functionality of your

Leica TPS800. It adds a completeroad alignment package to yourinstrument and thus increases yourflexibility on alignment and slopestake out on the entire worksite.Easy to learn and use, it onlyrequires a minimum of learning timeand is characterized by an intuitiveand straight-forward workflow.

Roadworks 3D manages horizontaland vertical alignments made up of

different elements. Alignments canbe uploaded with the supplied PCsoftware or easily be created on theinstrument.

Use Roadworks 3D to improve yourwork when you perform alignmentand slope stake out as well as check measurement tasks!

7/30/2019 Prospect TPS 800 (802- 805).pdf

5/6

intuitive...with many included extras

PinPoint Technologywith its accurately andextremely bundled visibleLaser provides you the:

highest degree of point-ing and measurementaccuracy.Measurement of wallcorners and inaccessiblepoints without specialapplications.Reliability even underhardest conditions likerain and snow.

All these unique featureshave been combined in thetwo reflectorless models:

R100 in theTPS800power with arange of up to 200 mand the R300 in theTPS800ultra with arange of over 500 m.

The link between

spot size and accuracy:

Individual data exchangeData exchange has been

implemented in such aflexible way that just aboutany format can be created.This allows data to betransferred to anysoftware, other surveyinstruments and GPS. Therequired programs are de-livered with the instrument.

Compatible accessoriesLeica Geosystems acces-sories are designed towithstand tough surveyconditions. An accessorykit suitable to the specifi-cations of the instrument,consisting of 2 batteries, aquick charger, data cable,mini prism set, tribrach andinstrument height meter, fitinto the instrument con-tainer for convenient andsecure transportation.

External connectionsInformation can be ex-

changed between theinstrument and a computerby standard RS232 cable,USB connection or wirelessBluetooth Wireless-Technology. Data can beconfigured to enable com-munication with mostdata collectors.

Easy to learnSimple to useStart regular surveys imme-diately with a definablestart-up sequence. Easyand direct operations usingthe function keys.Frequently used tasks areassigned to the numerickeys for increased produc-tivity. Coding and settingscan be selected with onebutton push. These featureshave been designed to saveyour time.

False measurement

TraditionalEDM Technology

TargetLeica PinPointEDM Technology

Direct.dxfWith Direct.dxf functionality,data can be downloaded directlyfrom the instrument in dxf-for-mat and read into AutoCADon a PC without any interme-diate steps.

Theft-protectionThe PIN-code feature preventunauthorized persons from usingthe instrument. Without correctcode, the Equipment can`t beoperated, data erased andmakes it unattractive to steal.This protects you from havingdamages, increases your safetyand possibly lowers your insu-rance rates.

Does your crew speak diffe-rent languages? Ours does.The TPS800 is the onlyinstrument of its class withmultiple languages onboard.This allows the user to choosethe preferred language simply and with only onekeystroke, for improvedefficiency and convenience.

7/30/2019 Prospect TPS 800 (802- 805).pdf

6/6

Illustrations, descriptions and technical specifications are not binding and may change.Printed in Switzerland Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2006.743108enUS I.07 RDV

Leica AccessoriesProduct brochure

Leica TPS400Product brochure

Leica TPS700Product brochure

Leica TPS1200Product brochure

Whether you want to survey a parcel of land or objects on a constructionsite, determine measured points on facades or in rooms, gather thecoordinates of a bridge or a tunnel Leica Geosystems total stationsprovide the right solution for every application.

They unite reliable results with easy operation and user-friendly appli-cations. Our total stations are designed to meet your specific require-ments. Modern technology enables you to work fast and productively,thanks to the straightforward and clearly structured range of functions.

When it has to be right.

Leica Geosystems AGHeerbrugg, Switzerland

www.leica-geosystems.com

Total Quality Management Our commitment to totalcustomer satisfaction

Ask your local Leica Geosystemsdealer for more informationabout our TQM program.

Distance meter(PinPoint R100/R300):Laser class 3R in accordance withIEC 60825-1 resp. EN 60825-1

Laser plummet:Laser class 2 in accordance withIEC 60825-1 resp. EN 60825-1

Distance meter (IR):Laser class 1 in accordance withIEC 60825-1 resp. EN 60825-1

Guide light (EGL):LED class 1 in accordance withIEC 60825-1 resp. EN 60825-1

The Bluetooth word mark andlogos are owned by Bluetooth SIG,Inc. and any use of such marks byLeica Geosystems AG is under license.Other trademarks and trade namesare those of their respective owners.