2
GreenstoneStructuralSolutions.ca ELITE SAFETY SERVICES BRANDON, MANITOBA, CANADA PROJECT PROFILE

PROJECT PROFILE - Greenstone · 5.5" gss panel gypsum sheathing eps insulation with drainage board base coat reinforcing mesh finish coat stucco/eifs material used stated r-value*

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PROJECT PROFILE - Greenstone · 5.5" gss panel gypsum sheathing eps insulation with drainage board base coat reinforcing mesh finish coat stucco/eifs material used stated r-value*

GreenstoneStructuralSolutions.ca

ELITE SAFETY SERVICESBRANDON, MANITOBA, CANADA

PROJECT PROFILE

29-A

PR

-15

29-APR-15

Page 2: PROJECT PROFILE - Greenstone · 5.5" gss panel gypsum sheathing eps insulation with drainage board base coat reinforcing mesh finish coat stucco/eifs material used stated r-value*

ELITE SAFETY SERVICESBRANDON, MANITOBA, CANADA

PROJECT | Greenstone Structural Solutions was used in the construction of Elite Safety Services located in Brandon, Manitoba. The 5.5" Greenstone Panels were used as the structural exterior walls for the 6,200 sq.ft. front office, which is designed in a unique “Y” shape. The Greenstone Panels fully supported the wood truss roof system and allowed for interior and exterior finishes to be applied directly to the panels (see figure 1).

CHALLENGE | Elite was the first commercial project in Brandon to comply with the National Energy Code of Canada for Buildings (NECB 2011) which is adopted and enforced in British Columbia, Alberta, Manitoba, Ontario, and Nova Scotia. The NECB 2011 provisions to limit the probability that buildings will use an excessive amount of energy. Commercial and institutional buildings need to be 25 percent more energy efficient than the previous codes.

SOLUTIONS | Greenstone Panels efficiently reach effective R-value requirements for all climate zones. The unique composite assembly of steel and EPS creates a full thermal break throughout the entire wall system. Steel does not run continuously from the exterior to the interior, eliminating thermal transmission complications evident in comparable assemblies on the market. Greenstone Panels are available in a 3.5", 5.5", 7.5" or 9.25" thickness. A staggered panel assembly is utilized to achieve high ceiling or multistory design applications.

BENEFITS | Architectural flexibility; Complete structural building envelope solution; 100% inorganic materials; Effective in LEED designs; Adaptable and builder friendly; Virtually no waste on site; Lightweight erection; Reduced utility costs; Increased building lifespan.

OWNER Elite Safety Services

ARCHITECT ARCCADD Architecture Inc.

STRUCTURAL ENGINEER Beach Rocke Engineering Ltd.

GENERAL CONTRACTOR Excel-7 Ltd.

GSS CERTIFIED INSTALLER Excel-7 Ltd.

GREENSTONE STRUCTURAL SOLUTIONS | PROJECT PROFILE | 20161.866.777.0006 • [email protected]

5/8" GYPSUM

5.5" GSS PANEL

GYPSUM SHEATHING

EPS INSULATION WITH DRAINAGE BOARD

BASE COAT

REINFORCING MESH

FINISH COAT

STUCCO/EIFS

MATERIAL USED

STATED R-VALUE*

EFFECTIVE R-VALUE

5/8" Gypsum 0.56 0.56

5.5" GSS Panel 22.935 33

Ext. Gypsum Sheathing 0.56 0.56

EIFS/Stucco Assembly 5 5

TOTAL R-VALUE 29.055 39.12

*ASTM C578

Figure 1