Typical grade of Cellulose ethers - Kima Chemical · Mortars for EIFS/Skim Coat WaloCel MKW 20000 PP 20 20,000 good air void stabilization Mortars for EIFS/Skim Coat WaloCel MKX 20000

Typical grade of Cellulose ethersManufacturers APPLICATIONS Cellulose ether Grade Viscosity Property

DOW

Cement-Based Tile Adhesives (CBTA) WaloCel VP-M-49125 8,000modified HPMC grade for long open time and very high slip resistance

Cement-Based Tile Adhesives (CBTA) WaloCel MKS 10000 PF 60 10,000modified HPMC grade for long open time and very high slip resistance

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 15000 PF 01 15,000medium viscosity HPMC grade recommended for standard quality polymer and non-polymer modified thin-sets

Cement-Based Tile Adhesives (CBTA) WaloCel MW 15000 PFV 15,000medium viscosity HEMC grade with delayed hydration; suitable for dry-mix and ready-to-use

Cement-Based Tile Adhesives (CBTA) MeThoCel 327 20,000 multipurpose; good open time and slip resistance

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 20000 PP 10 20,000modified heMc grade; good open time and workability

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 25000 PF 25 l 25,000modified heMc grade; long open time, good slip resistance and workability

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 40000 PF 01 40,000high viscosity heMc grade; recommended for standard quality polymer and non-polymer modified thin-sets

Cement-Based Tile Adhesives (CBTA) WaloCel MW 40000 PFV 40,000high viscosity heMc grade with delayed hydration; suitable for dry-mix and ready-to-use

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 45000 PP 10 45,000high viscosity heMc grade offering good open time, workability and moderate slip resistance

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 45000 PF 20 l 45,000modified heMc grade provides long open time, excellent workability and good slip resistance

DOW

Cement-Based Tile Adhesives (CBTA) WaloCel MKX 60000 PF 01 60,000very high viscosity heMc; high water retention/open time at low dosage rates

Cement-Based Tile Adhesives (CBTA) WaloCel MW 60000 PFV 60,000very high viscosity heMc with delayed hydration; high water retention/open time at low dosage rates

Cement-Based Tile Adhesives (CBTA) WaloCel M-20678 80,000ultra high viscosity heMc; high water retention/open time at low dosage rates

Tile Grouts WaloCel MK 3000 PF 3,000 excellent workabilityTile Grouts WaloCel MKW 4000 PF 01 4,000 easy workabilityTile Grouts WaloCel MKX 6000 PF 01 6,000 good workability and application propertiesSelf-Leveling Underlayments MeThoCel CP 7331 100 less segregation, good flowSelf-Leveling Underlayments MeThoCel CP 1119 300 less segregation, good flowSelf-Leveling Underlayments WaloCel MK 400 PF 400 less segregation, good flowSelf-Leveling Underlayments WaloCel MKW 2000 PF 01 2,000 easy workabilityMortars for EIFS/Skim Coat WaloCel MKW 4000 PF 01 4,000 easy workabilityMortars for EIFS/Skim Coat WaloCel MKX6000 PF 01 6,000 good workability and application propertiesMortars for EIFS/Skim Coat WaloCel MKS10000 PF 60 10,000 excellent open time,slip resistanceMortars for EIFS/Skim Coat WaloCel MKW 10000 PP 01 10,000 good air void stabilizationMortars for EIFS/Skim Coat WaloCel MKX 15000 PF 01 15,000 multipurposeMortars for EIFS/Skim Coat WaloCel MKW 15000 PP 30 15,000 good air void stabilization,sag resistanceMortars for EIFS/Skim Coat WaloCel MKW 20000 PP 20 20,000 good air void stabilizationMortars for EIFS/Skim Coat WaloCel MKX 20000 PP 10 20,000 easy workabilityMortars for EIFS/Skim Coat MeThoCel 327 20,000 multipurposeMortars for EIFS/Skim Coat WaloCel MKX 25000 PF 25 l 25,000 high yield, good workabilityMortars for EIFS/Skim Coat WaloCel MKX 45000 PP 10 45,000 high water retentionMortars for EIFS/Skim Coat WaloCel MKX 45000 PF 20 l 45,000 good workabilityCement-Based Plasters WaloCel MKW 15000 PP 30 15,000 air void stabilization, good standing strengthCement-Based Plasters WaloCel MKW 20000 PP 01 20,000 air void stabilization, good standing strengthCement-Based Plasters WaloCel MKW 20000 PP 20 20,000 air void stabilization, easy workabilityCement-Based Plasters WaloCel MKW 20000 PP 30 20,000 air void stabilization, sag resistanceCement-Based Plasters WaloCel MKW 20000 PP 40 20,000 air void stabilization, high yield

DOW

Cement-Based Plasters WaloCel MKW 30000 PP 01 30,000 air void stabilizationCement-Based Plasters WaloCel MKW 30000 PP 10 30,000 air void stabilization, easy workabilityCement-Based Plasters WaloCel MKW 30000 PP 30 30,000 air void stabilization, sag resistanceGypsum-Based Building Materials WaloCel MKX 20000 PF 40 20,000 reduced lump formationGypsum-Based Building Materials WaloCel MKX 30000 PF 60 e 30,000 easy workability, high yieldGypsum-Based Building Materials WaloCel MKX 35000 PP 35 35,000 multipurposeGypsum-Based Building Materials WaloCel MKX 40000 PF 20 40,000 reduced lump formationGypsum-Based Building Materials WaloCel MKX 70000 PP 01 70,000 high water retentionGypsum-Based Building Materials WaloCel MKX 70000 PP 40 70,000 easy workability, high water retention

Shinetsu

Cement tile adhesive premium Tylose® MB 10008 P410000 mPa•s Höppler

Consistency development:moderateFinal consistency:very highSag resistance:very highWater demand:very highWater retention:moderateInfluence on cement hydration:moderateHeat stability:low

Cement tile adhesive standard Tylose® MB 15009 P2 15000 mPa•s Höppler

Consistency development:moderateFinal consistency:moderateSag resistance:moderateWater demand:highWater retention:highInfluence on cement hydration:highHeat stability:low

Cement tile adhesive premium Tylose® MB 3003 P43000 mPa•s Höppler

Consistency development:moderateFinal consistency:very highSag resistance:very highWater demand:highWater retention:lowInfluence on cement hydration:highHeat stability:low

Shinetsu

Paint-stripping pastes Tylose® MB 60000 P260000 mPa•s Höppler

Biostability:noGloss:moderatePigment Compatibility:moderateAnti-spattering:moderatePseudoplasticity:moderateThickening effect:highWet scrub resistance:highWater retention:very high

Gypsum spray plasterGypsum trowelling compound

Tylose® MHS 100005 P3100000 mPa•s

Consistency development:fastFinal consistency:highSag resistance:highWater demand:highWater retention:very highInfluence on cement hydration:lowHeat stability:high

Cement one coat Tylose® MHS 10012 P610000 mPa•s

Consistency development:very fastFinal consistency:highSag resistance:moderateWater demand:highWater retention:moderateInfluence on cement hydration:moderateHeat stability:high

Cement one coat Tylose® MHS 10012 P610000 mPa•s

Consistency development: very fastFinal consistency: highSag resistance: moderateWater demand: highWater retention: moderateInfluence on cement hydration: moderateHeat stability: high

Shinetsu

Block laying adhesive Gypsum mounting binder Gypsum spray plaster


Consistency development: very fastFinal consistency: moderateSag resistance: moderateWater demand: highWater retention: very highInfluence on cement hydration: moderateHeat stability: high

Cement decorative render Cement skim coat


Consistency development: very fastFinal consistency: lowSag resistance: moderateWater demand: moderateWater retention: highInfluence on cement hydration: lowHeat stability: high

Tylose® MHS 30024 P4 30000 mPa•s

Consistency development: fastFinal consistency: moderate

Cement render EIFS Tylose® MHS 30027 P6

Höppler30000 mPa•s

Consistency development: very fastFinal consistency: moderateSag resistance: moderateWater demand: moderateWater retention: highInfluence on cement hydration: lowHeat stability: high

Shinetsu

Emulsion tile adhesive Tylose® MHS 60000 YP460000 mPa•s

Consistency development: fastFinal consistency: lowSag resistance: lowWater demand: low Water retention:very highInfluence on cement hydration: lowHeat stability: high

Gypsum hand plaster Tylose® MO 30023 P430000 mPa•s

Consistency development: fastFinal consistency: highSag resistance: highWater demand: highWater retention: highInfluence on cement hydration: moderateHeat stability: high

Emulsion joint filler Emulsion tile adhesive

Tylose® MOT 60000 YP460000 mPa•s

Consistency development: fastFinal consistency: lowSag resistance: lowWater demand: lowWater retention:very highInfluence on cement hydration: lowHeat stability: high

Protective colloidal effect: goodParticle size controll: good

Tylose® MOBS 50 G4 50 mPa•s

Rubber gloves Seed coating

PolymerisationSuspension polymerisation (PVC)

Shinetsu

Cement one coat Tylose® MO 60016 P460000 mPa•s

Consistency development: very fastFinal consistency: lowSag resistance: moderateWater demand: moderateWater retention: very highInfluence on cement hydration: lowHeat stability: high

Pencils Tylose® MO 4000 P44000 mPa•s

Ceramic applicationsEngobes & glazes Extrusion

Tylose® CER 406001 300 mPa•s

Thickening effect: moderatePlasticity: goodTemperature stability: goodBinding effect: moderate

Ceramic applicationsExtrusion Tylose® E 407003

20000 mPa•s

Thickening effect: highPlasticity: very goodTemperature stability: goodBinding effect: good

Ceramic applicationsPowder metallurgy Tylose® E 510024

10000 mPa•s

Thickening effect: very highPlasticity: goodTemperature stability: very goodBinding effect: very good

Ceramic applicationsExtrusion Tylose® E 514016

15000 mPa•s

Thickening effect: highPlasticity: goodTemperature stability: goodBinding effect: good

Shinetsu

Further applicationsRubber gloves Personal and home careShaving products

Tylose® E 7070024000 mPa•s

Thickening effect: moderateHigher purity: yesClarity of the solution: highStabilization of foam: highPseudoplasticity: lowCompatibility with salts: moderateCompatibility with surfactants:

Paint-stripping pastes Tylose® PSO 810001150000 mPa•s

Biostability: yes Thickening effect: very high

Cement decorative render Tylose® MH 6002 P46000 mPa•s

Consistency development: fastFinal consistency: moderateSag resistance: moderateWater demand: moderateWater retention: moderateInfluence on cement hydration: lowHeat stability: standard

Cement render Cement tile adhesive standard Gypsum hand plaster Gypsum joint compound Gypsum mounting binder Gypsum spray plaster Gypsum trowelling compound

Tylose® MH 60010 P4

60000 mPa•s

Consistency development: very fastFinal consistency: highSag resistance: moderateWater demand: highWater retention: very highInfluence on cement hydration:moderateHeat stability: standard

Cement tile adhesive ordinary Tylose® MH 60004 P6 according to Höppler60000 mPa•s

Consistency development: very fastFinal consistency: moderateSag resistance: moderateWater demand: moderateWater retention: very highInfluence on cement hydration: lowHeat stability: standard

Shinetsu

Cement skim coat Tylose® MH 60001 P660000 mPa•s

Consistency development: very fastFinal consistency: lowSag resistance: moderateWater demand: moderateWater retention: very highInfluence on cement hydration: lowHeat stability:standard

Cement one coat Cement tile adhesive ordinary Gypsum mounting binder Gypsum trowelling compound

Tylose® MH 60001 P460000 mPa•s

Consistency development: very fastFinal consistency: lowSag resistance: moderateWater demand: moderateWater retention: very highInfluence on cement hydration: lowHeat stability: standard

Pet litter Tylose® MH 60000 P660000 mPa•s

Grouts Coating materials Limewash paints Powder paints

Tylose® MH 6000 YP46000 mPa•s

Consistency development: fastFinal consistency: lowSag resistance: lowWater demand:very lowWater retention: moderateInfluence on cement hydration: lowHeat stability: standard

Shinetsu

Gypsum joint compound Tylose® MH 30026 P430000 mPa•s

Consistency development: moderateFinal consistency: very highSag resistance: very highWater demand: very highWater retention: highInfluence on cement hydration: moderateHeat stability: standard

Cement paints Exterior paints Silicone resin paints

Tylose® MH 30000 YP430000 mPa•s

Biostability: yesGloss: lowPigment Compatibility: lowAnti-spattering: goodPseudoplasticity: lowThickening effect: highWet scrub resistance: moderateWater retention: high

Self levelling floor compounds Tylose® MH 300 P2 300 mPa•s

Consistency development: slowFinal consistency: very lowSag resistance: lowWater demand: very lowWater retention: lowInfluence on cement hydration: lowHeat stability: standard

Block laying adhesive

Cement render


Consistency development: fastFinal consistency: moderateSag resistance: moderateWater demand:highWater retention: highInfluence on cement hydration: lowHeat stability: standard

Shinetsu

Cement tile adhesive premium Tylose® MH 10016 P410000 mPa•s

Consistency development: fastFinal consistency: very highSag resistance: very highWater demand: very highWater retention: moderateInfluence on cement hydration: moderateHeat stability: high

Cement tile adhesive premium Tylose® MH 10015 P410000 mPa•s


Cement decorative render

EIFS


Consistency development: fastFinal consistency: moderateSag resistance: moderateWater demand: moderateWater retention: moderateInfluence on cement hydration: moderateHeat stability: moderate

Cement skim coat Cement tile adhesive ordinary


Consistency development: very fastFinal consistency: lowSag resistance: moderateWater demand: moderateWater retention: very highInfluence on cement hydration: lowHeat stability: standard

Shinetsu

Toilet cleaners / WC-gels Tylose® MH 10000 KG410000 mPa•s

Thickening effect: moderateHigher purity: noClarity of the solution: moderateStabilization of foam: highPseudoplasticity: moderateCompatibility with salts: moderateCompatibility with surfactants: moderate

Gypsum joint compound Tylose® MH 10013 P410000 mPa•s


Akzo nobel

admixture in gypsum and cement BERMOCOLL® CCA 612

(Brookfield LV) 5500 – 7 500 mPa.s

BERMOCOLL CCA 612 prolongs the working time and effectively counteracts the sagging tendency of the plaster.

admixture in gypsum-based mortars BERMOCOLL® CCA 4702 500 – 3 500 mPa·s

BERMOCOLL CCA 470 ensures good water retention and gives a mortar with suitable working time.

gypsum based mortars BERMOCOLL® CCA 3285 000 – 7 000 mPa.s

BERMOCOLL CCA 328 effectively counteracts the sagging tendency of glue.

admixture in gypsum and cement BERMOCOLL® CCA 3122 300 – 3 000 mPa.s

BERMOCOLL CCA 312 prolongs the open time and effectively counteracts the sagging tendency of the plaster

latex paints BERMOCOLL® E 230 FQ260 - 360 mPa.s

BERMOCOLL E 230 FQ is easily dispersed in cold water of pH 7 or less

Akzo nobel

thickening and stabilizing effects in mortars and other building glues

BERMOCOLL® E 230X260 - 360 mPa.s

The simultaneous viscosity increase is moderate. Normal dosage is 0.4 - 0.8 % calculated on the dry mortar weight.

latex paints BERMOCOLL® E 320 FQ1 850 – 2 650 mPa.s

It improves the consistency, the stability, and the water retention of water based products.

stabilize aqueous dispersions BERMOCOLL® E 320 G1 850 – 2 650 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® E 351 X4 250 – 6 000 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® E 431 X1 700 – 2 400 mPa.s

improve workability, consistency, water retention and adhesion

cement-based tile fix and joint mortars BERMOCOLL® E 481 FQ4 250–6 000 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® E 511 X6 500-8000 mPa.s


latex paints forthickening and stabilizing effects

BERMOCOLL® EBM 55005 000 – 6 500 mPa.s

It improves the consistency, thestability, and the water retention of water basedproducts.

latex paints forthickening and stabilizing effects,

BERMOCOLL® EBM 80007 000 – 9 000 mPa.s

It improves the consistency, the stability,and the water retention of water based products.

latex paints for thickening and stabilizing effects

BERMOCOLL® EBM 75907 500- 9 000 mPa.s


latex paintsfor efficient thickening and stabilizing effects

BERMOCOLL® EBM 10 00010000 – 15000 mPa.s

It improves the consistency, the stability,and the water retention of water based products.


BERMOCOLL® EBS 351 FQ5 000 – 6 000 mPa.s



BERMOCOLL® EBS 451FQ3 000 – 4 000 mPa.s

It improves the consistency, the stability, and the water retention of water based products


BERMOCOLL® EBS 481FQ4 000 – 6 000 mPa.s


Akzo nobel

a thickener in all types of latex paints BERMOCOLL® EHM 200min 350 mPa.s

improves high shear viscosity, roller spatter, flow and levelling

thickener in all types of latex paints BERMOCOLL® EHM 3001 700 – 3 000 mPa.s

improves high shear viscosity, roller spatter, flow and levelling.

thickener in all types of latex paints BERMOCOLL® EHM 5007000 - 10000 mPa.s

improves high shear viscosity, roller spatter, flow and levelling

thickener in all types of latex paints BERMOCOLL® EHM Extra250 - 450 mPa.s

improves high shear viscosity, roller spatter, flow and leveling.


BERMOCOLL® EM 7000 FQ6 000 – 8 §000 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® M10750 – 1 200 mPa.s

intended as a water retaining and consistency improving additive to cement based mortars.

cement-based tile fix and joint mortars BERMOCOLL® M302 500 – 3 500 mPa.s

giving a unique balance between workability and strength.

cement-based tile fix and joint mortars BERMOCOLL® M30 Q2 500 – 3 500 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® ML 111 100 - 1 600 mPa.s


cement-based tile fix and joint mortars for improvement of workability,consistency, water retention and adhesion.

BERMOCOLL® ML 312 900 – 3 900 mPa.s

giving a unique balance between workability and strength

cement-based tile fix, adhesives and plasters

BERMOCOLL® M 706 000 – 9 000 mPa.s

retaining and consistency improving additive to cement based mortars.

cement-based tile fix and joint mortars BERMOCOLL® ML 716 200 – 9 200 mPa.s


cement based tile-fix BERMOCOLL® BCM 0503 500 – 6 000 mPa.s

giving unique balance between workability and strength.

Akzo nobel

cement based tile adhesive BERMOCOLL® BCM 0513 500 – 6 000 mPa.s


tile fix and joint mortars BERMOCOLL® BCM 1073 400 – 4 600 mPa.s


tile fix and joint mortars BERMOCOLL® BCM 1081 200 – 1 600 mPa.s


cement-based tile fix and joint mortars BERMOCOLL® M800 X11 000 – 15 000 mPa.s


admixture in gypsum based plaster BERMOCOLL® CCM 81212 000 mPa.s

It improves the consistency and the water retention of gypsum based plaster

cement and gypsum based mortars BERMOCOLL® CCM 82510 000 – 14 000 mPa.s

improving additive to cement and gypsum based mortars

gypsum based mortars BERMOCOLL® CCM 87912 000 mPa.s

improving additive to gypsum based mortars.

gypsum based mortars BERMOCOLL® CCM 89410 000 – 14 000 mPa.s

improvement of workability, consistency and water retention, leading to a prolongation of the open time

cement-based tile fix and joint mortars BERMOCOLL® ME 1000 X11 000 – 15 000 mPa.s

It improves the water retention, the consistency and the stability of water based products.

gypsum based mortars BERMOCOLL® CCM 107910 000 – 15 000 mPa.s

rheology modifier in all types of latex paints

BERMOCOLL® Prime 1000500 - 900 mPa.s

It improves the consistency, the stability, and the water retention of water based paints.


BERMOCOLL® Prime 25002 200 – 3 200 mPa.s

It improves the consistency, the stability, and the waterretention of water based paints.

Akzo nobel


BERMOCOLL® Prime 35003,000 – 4,000 mPa.s

It improves the consistency, the stability, and the waterretention of water based paints.

Lotte fine chemical

Normal Tile Cement

Mecellose FMC-2400634,000 – 44,000

High water retardationExcellent open timeGood heat resistance

Mecellose FMC-2400733,000 – 43,000

High adhesion strengthExcellent open timeHigh water retention

Mecellose FMC-2500245,000 – 55,000

Excellent open timeGood water retentionGood heat resistance

Mecellose FMC-2600253,000 – 63,000

High adhesion strengthExcellent open timeHigh water retention

Mecellose FMC-2370133,000 – 43,000

standard tile cement(c1)

Mecellose FMC-207014,000 – 22,000

Overall good performanceLong open timeLess retardation of cement hydration

Mecellose FMC-2250118,000 – 26,000

Good open timeGood slip resistanceGood heat resistance

Mecellose FMC-2300727,000 – 35,000

Less retardation of cement hydrationLong open timeGood workabilit

Mecellose FMC-2350232,000 – 40,000

Excellent open timeGood workabilityGood heat resistance

Mecellose FMC-2450240,000 – 50,000

High water retentionGood Heat ResistanceGood slip resistance

Lotte fine chemical

standard tile cement(c1)

Mecellose FMC-2450342,000 – 52,000

High water retentionLong open timeGood heat resistance

High Performance Tile Cement

Mecellose FMC-2101012,000 – 18,000

Excellent slip resistanceLess retardation of cement hydrationVery good open time

Cement plaster

Mecellose FMC-20717,000 – 13,000

Excellent workabilityLess retardation of cement hydration

Mecellose FMC-210277,000 – 13,000

Excellent crack resistanceFast setting timeExcellent water retentionGood workability

Mecellose FMC-2151011,000 – 17,000

Fast thickening effectGood water retentionGood workabilityGood air stability

Mecellose FMC-2201315,000 – 23,000

Excellent workabilityGood water retentionLess stickiness

Skim coat

Mecellose FMC-2350528,000 – 40,000

Excellent workabilityLong pot lifeGood water retention

Mecellose FMC-2500245,000 – 55,000

Excellent workabilityLong pot lifeLess water absorption

Joint Compound

Mecellose PMB-40HS3,500 – 5,600

Good workabilityLess retardation of cement hydrationGood heat resistance

Mecellose PMB-40H 3,500 – 5,600

Excellent PressureVery good Green-body hardnessGood Surface state

Lotte fine chemical

Joint Compound

Mecellose FMC-5300130,000 – 40,000

Long retarded gradeExcellent workabilityGood water retention

Mecellose PMH-986030,000 – 40,000

Excellent workabilityGood water retention

Ready-to-use Tile Adhesive

Mecellose FMC-882145,000 – 55,000

Long retarded gradeExcellent water retentionGood open time

Mecellose FMC-5300130,000 – 40,000

Long retarded gradeExcellent workabilityGood water retention

Putty

Mecellose FMC-5150213,000 – 22,000

Very low air contentsGood sag resistanceEasy handling

Mecellose PMC-40US35,000 – 45,000

Very high water retentionHigh thickening efficiencyGood open timeEasy handling

Joint CompoundHecellose H 100K 100000Hecellose H 30K 30000Hecellose H 50K 50000

MonocapaMecellose FMC-2051Mecellose FMC-22013

Tile grout

Mecellose FMC-2101012,000 – 18,000

Excellent workabilityLess Retardation of Cement HydrationHigh water demand

Mecellose FMC-2300727,000 – 35,000

Excellent workabilityHigh water demandLong working time

Mecellose PMB-40HS3,500 – 5,600

Good workabilityLess retardation of cement hydrationGood heat resistance

Lotte fine chemical

self leveling compoundMecellose FMC-20101Mecellose FMC-60150Hecellose H300

Masonry mortar

Mecellose FMC-2101012,000 – 18,000

Excellent workabilityHigh water demandGood compressive strength

Mecellose FMC-2300727,000 – 35,000

Excellent water retentionGood workabilityLess stickiness

Mecellose FMC-2400634,000 – 44,000

Excellent workabilityLess stickinessGood sag resistance

Mecellose FMC-2400733,000 – 43,000

Excellent workabilityExcellent water retentionLess stickiness

EIFS

Mecellose FMC-207014,000 – 22,000

Excellent wetting capabilityGood workabilityGood adhesion strength

Mecellose FMC-2101012,000 – 18,000

Less stickinessExcellent adhesion strengthGood workability

Mecellose FMC-2300727,000 – 35,000

Excellent workabilityLess stickinessExcellent wetting capability

Mecellose FMC-2400634,000 – 44,000

High water retardationExcellent open timeGood heat resistance

Mecellose FMC-2350427,000 – 39,000

Mecellose FMC-2450342,000 – 52,000

Excellent workabilityLess stickinessExcellent open time

Lotte fine chemical

Gypsum Machine Plaster

Mecellose FMC-715030,000 – 40,000

High water demandGood sag resistanceGood workability & water retention

Mecellose FMC-7351628,000 – 38,000

Excellent WorkabilityExcellent sag resistanceGood water retention

Mecellose FMC-7550248,000 – 62,000

Excellent water retentionHigh water demandGood workability & sag resistance

Gypsum hand plaster

Mecellose FMC-711728,000 – 38,000

Excellent WorkabilityExcellent sag resistanceGood water retention

Mecellose FMC-7400435,000 – 43,000

Excellent water demandExcellent sag resistanceGood water retention

Mecellose FMC-7550347,000 – 61,000

Excellent water demandExcellent sag resistanceGood water retention

Gypsum Finishing Plaster

Mecellose FMC-711527,000 – 37,000

Good workabilityGood sag resistanceHigh water demand

Mecellose FMC-7250725,000 – 35,000

Good water retentionLess lump formationHigh water demand

Joint filler

Mecellose FMC-711527,000 – 37,000

Good workabilityGood sag resistanceHigh water demand

Mecellose FMC-510029,000 – 15,000

Excellent workabilityLess lumpingGood wet adhesion

Lotte fine chemical

Joint filler

Mecellose FMC-2400634,000 – 44,000

High water retentionExcellent workabilityGood sag resistance

Ashland

self leveling compound MHPC400

Economical Gypsum plaster

Culminal C835218500-23000

Excellent workabilityHigh wetabilityHigh sag resistance

Culminal C838135000-47000

Excellent workabilityHigh wetabilityHigh water retentionGood sag resistance

Superior Gypsum plaster

Culminal C870627000-36000

Reduced lump formationFor plasters with lower water demand

Culminal C838134000-46000

Excellent workabilityHigh wetabilityHigh water retentionGood sag resistance

Skim coat

Culminal C838135000-47000

Long open timeGood sag resistance

Combizel M402535000-45000

Combizel LH40M34000-46000

Combizel LH70M63000-72000

PREMIUM C2TEBrookfield RVT 2%

Culminal C9166 25000 Outstanding open timeSuperior water resistanceVery high strength valuesHigh sag resistance

Culminal C9167 9000Culminal C9168 8000

SUPERIOR C2T/C1 TE

Culminal C856410000-15000

Increased open timeExcellent water retentionHigh sag resistanceGood workability

Ashland

SUPERIOR C2T/C1 TE Culminal C916420000-30000

High water retentionOutstanding open timeHigh sag resistanceGood heat resistance

Culminal C9166 25000

Outstanding open timeSuperior water resistanceVery high strength valuesHigh sag resistance

Tile adhesive C1NPD/C1/C1T

Culminal C836732000-43000

Outstanding correctionHigh sag resistanceGood water retentionHigher strength

Culminal C911562000-75000

Outstanding correction timeExcellent heat resistanceGood water retentionSufficient sag resistance

Culminal C838135000-47000

long open time good sag resistance

Other related products

Culminal C811422000-30000

Culminal C855517000-23000

Culminal C910417000-25000

Culminal C911562000-75000

Culminal C9133 4000-6000

MHEC15000PFF18000-24000

MHEC 6000PFS 6000

Economical EIFS Culminal C8352 21000Excellent sag resistanceExcellent workability

Ashland

Superior EIFS Culminal C9164 2000-30000Long embedding timeCreamy workability

Premium EIFS Culminal C9166 25000Very long embedding timeCreamy workability

Other related products

Culminal C835517000-23000

Culminal C910417000-25000

Culminal C911562000-75000

Culminal C915525000-35000

MHEC15000PFF18000-24000

MHEC 6000PFS 6000

Combizel LH20M 18000-24000

Combizel LH40M 38000-55000

Combizel LH70M >60000

Gypsum joint filler

Culminal C8475 35000 Improved wetabilityExcellent water demandHigh sag resistanceSpecial dissolution property

Culminal C849517000-22500


High efficiencyHigh water demandHigh water retentionVery strong thickening effect


High efficiencyHigh water demandHigh water retentionStrong thickening effect

Ashland

Economical Renders Culminal C838135000-47000

High water retentionHigh sag resistance

Superior Renders Culminal C856410000-15000

Increased open timeUniversal application properties

Premium Renders

Culminal C830112000-17000

Very good workabilityUsed for one-coat render application

Culminal C8352 21000 Excellent workabilityExcellent sag-resistanceReduced stickinessCulminal C8355

17000-23000

Other grades

Culminal C405165000-85000

Culminal C405338000-51500

Culminal C807022000-30000

Culminal C831518000-24000

Culminal C8344 2000-26500

Culminal C835015000-20500

Culminal C835125000-30000

Culminal C835324000-32000

Culminal C838455000-75000

Culminal C870435000-45000

Culminal C836033000-45000

Culminal C837628000-38000

Ashland

Other grades

Culminal C871157000-67000

Culminal C9111 7500-10500

Documents

Typical grade of Cellulose ethers - Kima Chemical · Mortars for EIFS/Skim Coat WaloCel MKW 20000 PP 20 20,000 good air void stabilization Mortars for EIFS/Skim Coat WaloCel MKX 20000