Programming the Heating Schedule

CONFIRM

M

1

2

CONFIRM

3

TING HEAT

G SCHEDULE

CONFIRM

5/2 SPLIT

4

5/2 SPLIT

YCOMPLETE 7 DA

INDIVIDUAL

5 6

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

Programming the Heating Schedule Continued

5

1-5

5/2 SPLIT

6-7

HOUR

Press or

To choose the MINUTES

SET PERIOD

Then press CONFIRM

SET PERIOD

To scroll across HIGH / MID / LOWHEATING LEVELS to be active during STAGE 1

HIGH MID LOW

S

Press

as shown hereSUNNY LEVEL has been chosen for PERIOD 1

High TemperatureLevel

press CONFIRM

when the preffered heating level is selected

SET PERIOD

To set the time for PERIOD 2

Press or

To choose the HOUR

Then press CONFIRM

To begin Date and Time Setup

wake up the stat by tapping any button.

then press and hold the CONFIRM button for 3 seconds

Hold down for 3 seconds

) s

Press or

To choose the MINUTES

SET PERIOD

Then press CONFIRM

SET PERIOD

Press or

To choose the desiredHEATING LEVEL to be active during PERIOD 2

Then press CONFIRM

7 8

9 10

11 12

13 14

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

Programming the Heating Schedule Continued

as shown hereMOON LEVEL has been chosen for PERIOD 2

Low TemperatureMode

SET PERIOD

To set the time for PERIOD 3

Press or

To choose the HOUR

Then press CONFIRM

Press or

To choose the MINUTES

SET PERIOD

Then press CONFIRM

SET PERIOD

Press

To choose the desiredHEATING LEVEL to be active during PERIOD 3

Then press CONFIRM

as shown hereSUNNY LEVEL has been chosen for PERIOD 3

High TemperatureLevel

SET PERIOD

To set the time for PERIOD 4

Press or

To choose the HOUR

Then press CONFIRM

To begin Date and Time Setup

wake up the stat by tapping any button.

then press and hold the CONFIRM button for 3 seconds

Hold down for 3 seconds

) s

Press or

To choose the MINUTES

SET PERIOD

Then press CONFIRM

15 16

17 18

19 20

21

To begin Date and Time Setup

wake up the stat by tapping any button.

then press and hold the CONFIRM button for 3 seconds

Hold down for 3 seconds

T ) s

SET PERIOD

Press

To choose the desiredHEATING LEVEL to be active during PERIOD 4

Then press CONFIRM

22

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

Programming the Heating Schedule Continued

as shown hereMOON LEVEL has been chosen for PERIOD 4

Low TemperatureLevel

For PERIODS

If no further modes are required for days 1 to 5 the time setting can be left blank for periods 5 & 6 in the schedule.

For PERIODS

To leave periods 5 & 6 inactive leave the clock blank on the display.

For PERIOD 5

then press CONFIRM

For PERIODS

and then CONFIRM

For PERIOD 6

Alternatively, if a 5th and 6th period are required, set the time, then choose the desired heating levels for each of the periods, as shown in the previous steps.

Press CONFIRM once the final period is set.

) s

The display will then

move to the

WEEKEND setup for

days 6-7.

) s

To begin Date and Time Setup

wake up the stat by tapping any button.

then press and hold the CONFIRM button for 3 seconds

Hold down for 3 seconds

) s

For the weekend setup, input a 4 or 6 PERIOD schedule for days 6-7 using the steps previously shown.

then press CONFIRM

23 24

25 26

27 28

29

To begin Date and Time Setup

wake up the stat by tapping any button.

then press and hold the CONFIRM button for 3 seconds

Hold down for 3 seconds

T ) s

As shown on this display, the system will now revert back to AUTO MODE - running the set program for that time of day.

AUTO MODE

) s

30

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

Programming the Heating Schedule Continued

The HEATING SCHEDULEhas now been successfully programmed.

) s

If a COMPLETE 7 DAY setup is preffered:

After the program ( ) screen at the start of the heating schedule setup

to select the COMPLETE 7 DAY option

t

Press

) s

then press CONFIRM

Input the schedule required for the 7 days in the same way as previously demonstrated.

) s

After the last period is programmed

The system will return to AUTO MODE and the COMPLETE 7 DAY schedule will be active.

press CONFIRM

The 3rd Heating Schedule option is the INDIVIDUAL program.

If this is the preffered schedule type then input the schedule required for each individual day.

P

Once the final period has been entered for Day 7 then

The system will return to AUTO MODE and the INDIVIDUAL schedule will be active.

press CONFIRM

When the heating schedule is running in AUTO MODE and the user wishes to temporarily adjust the temperature, this can be done by using MANUAL OVERRIDE

31 32

33 34

35 36

37

To manually override the temperature whilst a heating mode is active simply

Press or

until the temperature is at the desired level

then press CONFIRM

38

JG Aura - Programming the Heating Schedule Issue 1 - May 2015

Programming the Heating Schedule Continued

MANUAL OVERRIDE

The system is now running in MANUAL OVERRIDE.

When the system is set to Manual Override the hand symbol will appear next to the temperature indicator.

M

HEAT INDICATOR

*

If the user increases the set temperature above that of the room, the HEAT INDICATOR will appear.

T

This symbol indicates the system is calling for heat.

Whenever the system is heating up this symbol will appear on the display.

HEAT INDICATORH

* H h l k ll advance rapidly until 17:00 and the Hand icon will fade out to demonstrate the e

Manual Override will last until the next period is due to run.

When the next period becomes active the system will revert back to Auto Mode.

T

39 40

41 42

The hand symbol will not be visible when the system is running in Auto Mode.

To cancel Manual Override, tap

or

This will return the set temperature to that of the active heating level.

43 44