Upload
gabriel-ramirez
View
32
Download
5
Embed Size (px)
DESCRIPTION
Programming Gboard Pro With Iteadstudio FOCA
Citation preview
Compiled by JA Conradie www.robotics.org.za
Programming the Gboard Pro with Iteadstudio FOCA
1. Use a 3.3V USB to Serial programming cable, or the FOCA USB to Serial
from Iteadstudio, set the VCCIO switch to 3.3V
2. Connect the FOCA USB to Serial to the Gboard Pro
3. In the Arduino IDE select board type -> Mega 2560
4. Select the correct serial Port in Arduino IDE – Tools -> Serial Port
5. The Gboard Pro is now ready for programming