Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Page 1/80
B. Educational and Academic Qualification
1989 – 1991 University of Wales, Swansea, United Kingdom PhD in Mechanical Engineering Thermal and Flow Analysis of Casting Process: Numerical Simulation and Experimental Works (Areas of interest: Casting Technology, Metal Forming, Composite Material and Automation)
1987 – 1988 Univeristy of Wales, Swansea, United Kingdom Master of Science (Mechanical Engineering) Design and Economic Manufacture
1982-‐1986 Universiti Pertanian Malaysia Bachelor of Engineering (Agricultural)
C. Appointments and Administration Duities
No Detail Designation Duration
1 Dept. of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia
Professor Sept 2007-‐to date
2 Universiti Putra Malaysia Senate Member 1July 2011-‐ Jun 2014
3 Program Master Kejuruteraan Sistem Pembuatan Coordinator 2013-‐2018
A. BIODATA
PROFESSOR SHAMSUDDIN BIN SULAIMAN. PhD BEM, MySET, MASME, MAFS, IAAM
Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA
Specialisation: Manufacturing Engineering, Metal Composite Materials and Casting Technology
Tel: 603-‐ 89466334 Fax: 603-‐ 86567122 Mob: 6016-‐2276215
email: [email protected] website:http://www.upm.edu.my Scopus: https://www.scopus.com/authid/detail.url?authorId=12647225400 H-‐Index: 17 ; Google scholar: 23
Page 2/80
4 School of Graduate Studies
Universiti Putra Malaysia
Deputy Dean
April 2008 – March 2011
5 Faculty of Engineering Universiti Putra Malaysia
Deputy Dean
Sept 2003-‐Aug 2006
6 University Research Park/Taman Penyelidikan Universiti (TPU) Universiti Putra Malaysia
Deputy Director
Feb. 2001-‐ Nov 2001
7 Dept. of Mechanical and Manufacturing Engineering Head Jan 1995-‐ Aug 1998
8 Kolej Tun Perak Universiti Putra Malaysia
College Master/Pengetua
April 1999-‐Oct 1999
9 Sport and Social Club, Faculty of Engineering Deputy President
1997-‐2000
10 Dept. of Mechanical and Manufacturing Engineering Research Coordinator
2014-‐2016
11 Foundry Lab, Dept. of Mechanical and Manufacturing Engineering
Coordinator 1995-‐2010
12 Metal forming Lab, Dept. of Mechanical and Manufacturing Engineering
Coordinator 2001-‐ 2008
13 Dept. of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
Associate Professor
August 1998-‐August 2007
14 Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
Head of Department
Jan 1995-‐August 1998
D. Teaching
Teaching Courses
Code Course Name Institution KMP 3001/EMM3701/EMM3712
Manufacturing Process I UPM
KMP 3003/EMM3702/EMM4702
Manufacturing Process II UPM
EMM 3008 Powder Metallurgy UPM KMP 3005/EMM3005 Tools Engineering UPM EMM 3807 Machine Tool Technology UPM KMP 3803 Automation II UPM KMP3508 Robot Dynamic UPM KS311 Fluid Mechanics 1 UPM
Page 3/80
KS 353 Material Engineering UPM KS 373 Fabrication and Production UPM KMP 5001/EMM5701/5702
Advanced manufacturing Processes UPM
EMM 5708 Automation and Robotics UPM EMM5602 Total Quality Management UPM EMM 5616 Maintenance Management UPM KCEP 3302 Tools Engineering (Mould and Die) UM
E. Supervision of Students
Level Graduated / Completed On-‐going
Chairman/Main Supervisor
Committee/ Co-‐Supervisor
Chairman/ Supervisor
Committee/ Co-‐Supervisor
PhD 16 29 6 10 MSc 20 16 0 2 MEng 105 -‐ 2 -‐ BEng 81 -‐ 2 -‐
PhD Completed (Supervisor) No. Name Thesis Title
Year
Graduated 1. Ahmad Kadmose
Aldeehani (GS43396) Integrated Green Halal Supply Chain Management in Food Manufacturing Industry
2019
2. Rosmamuhamadani bin Ramli (GS34430)
Characterization and mechanical properties of in-‐situ titanium diboride fibre reinforced aluminium copper alloy composites
2016
3. Ishak Mohmad Ali (GS32496)
Mechanical Properties of Propeller by vibration casting
2016
4. Jamshid Nemati GS28431
Mechanical properties of ultra-‐fine grain Aluminium Al6063 and pure copper processed by equal channel angular extrusion method
2015
5. Hani Mizhir GS29903
Improvement of the Mechanical Properties of Aluminium Alloys and Composite Extruded parts
2015
6. Nanang Fatchurohman GS26836
Manufacturing process and material selection using modified multi criteria decision making for brake disc
2014
7. Azhar Abdullah GS19228
Mechanical properties of Tin Mine tailing sand for greensand casting mould
2013
8. Taufik Saroni GS22022 Development of non-‐linear thermal expansion model for casted Aluminium Silicon Carbide
2012
Page 4/80
9. M.Sayuti GS20480 Properties of Titanium carbide reinforced aluminium silicon alloy matrix
2012
10. Daryoush Safarzadeh GS18284
Design an development of a self-‐propelled hydraulic floor crane
2012
11. Mohamed A.Abdulmawlla Jolgaf GS16483
Optimization of closed die forging process 2011
12. Elfetori F. Abdewi GS13364
Design of composite tube subjected to quasi-‐static and dynamic impact loadings
2007
13. Thoguluva Raghavan Vijayaram GS1340
Properties of Metal matrix Composite of Aluminium – 11.8% Silicon Reinforced with different particulates
2006
14. Lim Ying Pio GS11777 Effects of grain refinement on the cooling rate, and microstructural and mechanical properties of Al-‐Si sand casting
2006
15. Ooi Chee Keong Development of thermal and flow analysis in Metal matrix composite casting
2005
16. Rosnah Mohd Yusof Implementation of Advanced Manufacturing Technologies (AMTs) in the Small and Medium Scale Industries (SMIs) of Malaysia
2002
PhD Completed (Co-‐Supervisor) No. Name Thesis Title
Year
Graduated 1. Teo Hiu Hong
(GS31074)
Manufacturing System Engineering 2019
2. Eisa A E b AlostadHong (GS43394)
Manufacturing System Engineering 2019
3. Khaled H M A Alkandari (GS43395)
Manufacturing System Engineering 2019
4. Ahmed Ali M. Khan (GS44222)
Industrial Engineering 2019
5. Khairul Nizam Md Tohit (GS35798)
Identifying Inconel 718 fasteners failure using structured probem solving method
2018
6. Qasim Mhalhal Azpen (GS39560)
Reinforcement and hot workability of aluminium alloy 7075 particulate composites
2018
7. Mohd Shahrizan bin Yusoff (GS38448)
Lean Engineering in Automotive Industry 2018
8. Bala Gambo Jahun (GS37351)
Automated traction tyre system of Agricultural machineries
2018
9. Mehran Tamjidy Multi-‐Objective Optimization of Friction Stir 2017
Page 5/80
(35754) Welding Process Parameters of AA6061-‐T6 and AA7075-‐T6 Using a Biogeography Based Optimization Algorithm
10. Mohamed Serdah M (GS37298)
Variable Valve Timing Optimization by Using Electromagnetic Solenoid in the Engine
2016
11. Mohd Uzair bin Mohd Rosli (GS30204)
Development of value added engineering concept generation for automotive parts
2015
12. Shahla Paslar (GS31529) Development of hybrid dynamic scheduling model for flexible manufacturing system
2016
13. Mohd Azaman Md Deros (GS32933)
Development of Thin wall natural Fibre Composite 2015
14. Muhammad Yusuf (GS22333)
Cutting parameter optimization for aluminium LM6 composite using design of experiment method
2013
15. Amer Najat Najmaldeen Kakahy (GS28436)
Design and development of an integrated slasher (Pulverzer) fro sweet potato harvester
2013
16. Mohammad Reza Shahraki (iGS18304)
Industrial Engineering 2012
17. Ali Hashemi (GS21422) Agricultural Machine design
2012
18. Mohammed Shu’aibu Abubakar (GS21830)
Machine Design 2012
19. Mehrdad Nikbakht Eliaderany (GS21374)
Supply chain Management in Oil Industry 2012
20. Fatai Bukola Akande (GS21068)
Motion resistance analyses of towed narrow wheels 2011
21. Md.Akhir Hamid (GS15631)
Development of Sweet potato harvester
2011
22. Mohammadreza Vasili (GS18909)
Development of load shuffling and travel time model for miniload sutomated storage and retrieval system with open-‐rack structure temperature for turning operations.
2011
23. Gholamreza Ismailian (GS17989)
Line Balancing of Production line. 2010
24. Suditama (GS05827) Analysis of Thermal Storage Material and Heat Transfer Characteristics
2008
25. Fayiz Yousef Mahmoud Abu Khadra (GS12543)
Metamodelling Technique of metal forming process
2006
26. Ooi Chee Keong (GS02448)
Improving Flexibility in Manufacturing using a Family Ordering System for long lead time
2005
Page 6/80
components
27. Elnougomi Abd. Elgadir Omer
Design, Fabrication and Performance Test of a Peanut Harvesting Machine
2000
28. Tang Sai Hong Rapid Prototyping using a Precision Robotic Manipulator
2000
29. Faizal Amri The performance of a disk plow combined with a rotary blade in wet soil
1997
PhD Progress (Supervisor)
No. Name Thesis Title
Expected Year to be
Graduated 1. Subramaniasarma a/l
Sreenivasan (GS31060)
BMC Kenaf Reinforced Polymer 2020
2.
Zolkarnain bin Marjom (GS41838)
Composite Casting Technology 2020
3.
Almukhtar. Ib. A. Aljermi. (GS42636)
Casting: Improvement of Al Cu Composite 2020
4.
Zatil Aqmar binti Zulkifli (GS40943)
Wettability in Casting Process 2020
5.
Mohammad Sh I A M I Alhajji (GS49070)
Integrated maintenance management in Sport Facility
2020
6.
Rami Abdulhakeem Hasan Ba Raidah (GS47641)
Integrated maintenance management in Halal Food
2020
PhD Progress (Co-‐Supervisor) No. Name of Students and
Title of Thesis/Project Thesis Title
Year Expected
to be Graduated
1. Teo Hiu Hong (GS31074)
Industrial Engineering
2019
2. Jethesh Prabhakaran (GS31899)
Manufacturing System Engineering 2020
3. Mageswaran a/l Arunasalam (GS36238)
Manufacturing Engineering 2020
4. Bt Iskandar Zulkarnain bin Baharudin
Manufacturing system Engineering 2020
Page 7/80
(GS37694)
5. Mohd Asnawi Omar (GS45040)
Rapid Prototyping 2020
6. Norazlan bin Samsudin (GS48018)
Material Engineering 2020
7. Muhammad Anas bin Mohammad Sayuti (GS48502)
Industrial Engineering 2020
8. Turki S A H Al-‐Qahtani (GS49057)
Industrial Engineering 2021
9. Adel S M A Alsaeed (GS49059)
Industrial Engineering 2021
10. Negin Ashrafi (GS49138)
Industrial Engineering 2021
Master of Science Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Mona Kiaee (GS22043) Development of Squeeze casting
2015
2. Hafizal Abu Bakar (GS12123)
Design and Fabrication of three component balance of wind tunnel
2012
3. Suraya Sulaiman (GS22223)
Metal flow and solidification of casting process 2011
4. Nanang Fatchurohman (GS19360)
Molten metal flow and solidification of casting process 2010
5. Mostafa Badakshan (GS18160)
Optimization of simultaneous scheduling for machines and automated guided vehicles using fuzzy genetic algorithm
2009
6. Ehsaanreza Bagherian (GS 19723),
Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes
2009
7. Pooria Matoorian (GS16823)
Development of Super Alloy machining 2008
8. Khairul Nizam Md. Tohit (GS13383)
Improvement of accuracy level of automotive front fender shield assembly using process failure mode and effect analysis and control plan techniques.
2006
9. M. Sayuti (GS12364) Mechanical properties and characterization studies on the ascast quartz particulate reinforced LM6 alloy matrix composites
2006
Page 8/80
10. Wong Choon Tat Design and fabrication of plastic injection mould
2004
11. Kader Ibrahim Ab. Wahab
Wafers fabrication of bipolar transistor 2003
12. Mohamad Irwan Yahaya
Reverse Engineering of free-‐form surfaces 2003
13. Edi Sham Zainudin
Numerical Invesigation of Fibre Reinforced Polymer 2002
14. Azman Senin Optimisation of machining parameters in Wire Cutting Process for Cooling Jig
2002
15. Mohd. Razali Samin Robot Manipulation Tracjectory Planning in Complex Position
2002
16. Mohd Khairol Anuar bin Mohd Ariffin
Design, Fabrication and Analysis of Plasting Injection Moulding Mould
2001
17. Alex Lim Kheng Hooi Thermal Analysis of Two and Three-‐gate Sand Casting Mould
2001
18. Elfetori F. Abdewi Using FEM in Optimisation of Die Casting Design
1999
19. Md Samsul Abedin Computer Aided Engineering in diecasting design
1997
20. Ng Yu Ting Development of Auto Wire Bonder Expert System
1997
Master of Science Completed (Co-‐Supervisor)
No. Name Thesis Title
Year Graduated
1. Hamdan Yahya Ahmed Al-‐Ruhaimi (GS27013)
Automated approach for oil palm in vitro shoot sorting
2014
2. Seyed Ehfarzaneh Nojabaei (GS26533)
Development of priority oriented scheduling method to increase the efficiency and reliability of manufacturing system
2009
3. Mohd Fauzi Hashim Rigid Plastics FEA in metal forming processes
2007
4. Mohandas a/l Krisnan Design and development of labour productivity monitoring system in manufacturing
2007
5. Sharifah Imihezri Syed Shaharudin (GS12124)
Clutch pedal design and fabrication for Injection moulding for polyamide-‐based short fibre reinforced composite
2005
6. Lee Hoo Boon Rapid Prototyping system of composite material products
2003
7. Pitoon Nopnakorn Development of 2D CAD software based on ISO technical drawing standard
2003
8. A.K.M.Parves Iqbal Development of an intelligent painter robot using 2002
Page 9/80
Cartesian coordinate approach for construction industry
9. Tan Chee Fai Development of hole recognition system using rule-‐based technique
2001
10. Mohd Ahadlin Mohd Daud
The Evaluation of Mechinablity and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machine
2001
11. Ten Seng Teik Emulation of the Space Robotics System on Earth
2001
12. Mohamed A.Abdulmawlla
CAD/CAM system for closed die forging Process 2000
13. Elsadiq Mahdi Ahmed Saad
Design and Fabricate filament winding machine and analysis of cotton/epoxy and pandanus/epoxy
1997
14. Mohabatul Zaman Bukhari
Development of no-‐clean solder for Radio Frequency power module
1996
15. Shafina Sultana Simulation-‐based analysis of kinematics, dynamics and control of space robots
1995
16. Wan Tarmeze Wan Ariffin
Strength and Stiffness of joints in rattan furniture 1994
Master of Science in Progress (Co-‐Supervisor) No. Name of Students and
Title of Thesis/Project Thesis Title
Year Expected
to be Graduated
1. Nur Liyana binti Mat Hussin (GS43760)
Microsructural studies and shear property of Sn-‐Ag-‐Cu lead free solder reinforced with carbon nanotube
2020
2. Amirah binti Rosman (GS48616)
Inventory management system for maintenance equipment using RFID technique
2020
Master of Engineering Completed (Supervisor – Without thesis)
No Name Thesis Title
Year Graduated
1. Talal Hassan Alshammari
Recycle base oil quality guidelines for the kingdom of Saudi Arabia
2019
2. Ammar Emhemad Ezzaedi
Green food packaging in supply chain : case studies on Nestle and Kraft foods
2019
3. Shakib Hyder Resource levelling optimization in manufacturing Industry
2019
4. Pravinaa Sooranaranan Flow induced vibration in barred tee’s for launchers 2019
Page 10/80
in oil and gas industry
5. Ali Hameed Ahmed Factors affecting the contractoris BID/NO BID decision on the Yemeni construction projects
2018
6. Muhammad Muaz Abu Bakar
Aluminium alloy hybrid metal matrix 2018
7. Mohamad Ihsan Abdul Hamid
The role of total productive maintenance (TPM) in increasing the productivity and efficiency in industry
2018
8. Thaer Zuhair Abdul Razzaq
The effect of composite material distribution and shape optimization on energy absorption system
2018
9. Muhammad Fariz Fadzil hermal – induced defects in casting and optimization for manufacturing
2017
10. Azaza Baheddine Maintenance Management of UPM Stadium 2017
11. Rahaf Ali Muhammad Construction waste in JORDAN causes and factors 2017
12. Nurul Ashikin Shahri Improvement of wind system in motorcycle safety gear dryer
2017
13. Hussein Raheem Hussein
Numerical investigation of heat transfer enhancement by using nanofluid in double pipe heat exchanger with rod insert
2017
14. Walid A.M. Abotbina Study the effect of nozzle-‐to-‐plate spacing on heat transfer and fluid flow of jet impigment
2017
15. Ashham Mohammed Anid
Numerical investigation on heat transfer enhancement in a heat exchanger tube fitted with inclined vortex ring
2017
16. Melvin Lain Zhimin Case Study on Construction of a Hydrodam in Malaysia : Tembat DAM
2017
17. Unida Izdihar Md Dun Design and development of stopper of elevation panel for lifting operation of central processing platform (CPP) jacke
2017
18. Illinadila Mohammad Khalid
Impelamentation of Project management system 2017
19. Chong Kai Loon Design and fabrication of smart SMT (Surface mount technology) lin
2017
20. Mohammad Syaiful Shariff
Direct materials wastage reduction for transfer molding in semiconductor industry
2016
21. Wan Mohd Zulhilmi Lightweight chasis for two way radios using thixomolding magnesium alloy.
2016
22. Fairul Ariffin
Effect of water quality during mould cooling to the mould serface of metal slab in thin casting process
2016
Page 11/80
23. Fuan Han Seng Air quality control on kitchen exhaust
2016
24. Mohd Zuhaifi Zainol Effect of warm peening on fatique performance of SAE 9254 steel
2016
25. Turki Salem Mohsen Al-‐Kaf
Image processing for blood vessel segmentation in retina
2016
26. Hassan jabbar Hayawi Numerical simulation of heat transfer ro nanofluids flow in ribbed channel
2016
27. Wan Norizawati Wan Isahak
Automated visual inspection system for detection in diodes manufacturing
2016
28. Mohd Nawawi Ahmad Simulation of hybrid cooling method using thermoelectric cooler in electric cooling
2016
29. Mohd Kamarul Nizam bin Mahmood
Effect of Post Weld Heat Treatment Microstrcuture and Mechanical Properties of Carbon Steel Plate
2015
30. Amjad Ashor Mohamad The Effect of Air Bleed on Jet Engine Performance
2015
31. Khairil Amri bin Kamaruzzaman
Impact of Corrosion Coatings on Exposed Structures
2015
32. Ahmed Ali M. Khan Total Quality Management in Industry
2015
33. Kong Yoke Yoon
A Study of Quality Control as a Competitive Tool for Small Scale Enterprises in Selangor
2015
34. Mohd Shafei San Design and fabrication of food automated system
2014
35. Ismi Aishah Ishak Service Quality/Management Engineering
2014
36. Ili Marini Zainal Abidin Implementing Lean Six Sigma For Process Improvement
2014
37. Masni Ahmad Basri Service Management in MAS
2014
38. Halimaton Nabilah Mohd Husin
Total Quality Management in Food Industry 2014
39. Rami Abdulhakeem
Maintenance Management in SME 2014
40. Mohamad Juraidi Jamal Natural composite material
2014
41. Mohamad Shahidan Machine maintenance
2014
42. Noor Diyana Dahlan Plastic Injection Mould
2014
43. Rosidah Mohd Norsat Computational Analysis in Manufacturing Process
2014
44. Marwan Mat Salleh Analysis of Used Polytops From Schools in Malaysia
2014
45. Joshua Raj Solar Powered Car Ventilation System 2014
Page 12/80
46. Mohd Norhan
GS33725 E-‐Procurement Integration:Impediment Face by Malaysia's Automakers Vendors
2013
47. Safwan Azizi GS34652
Design of Plastic Injection Mould for thick wall product
2013
48. Mohd Firdaus Dzulkafli GS32797
Maintenance Strategy Application in Industry
2013
49. Zatil Hafila Kamaruddin GS33602
Metal Casting Process 2013
50. Emeyusrezal Daud GS34894
The Development of Green Tech in Aotumotive Industry in Malaysia-‐Development Green Vehicle in Proton
2013
51. Zatil Hazrati Kamaruddin GS33609
Fabrication of Skid Tank
2013
52. Zulkefli Ismail GS34381
Hot Rolled Coil at The Steel Making Plant -‐The Quality Problems
2013
53. Nazarul Abidin GS32796
Failure Analysis in Manufacturing Machinery / CAD CAM
2013
54. Nasuha Menhat GS32649
Smartphone features among UPM students 2013
55. Nur Atiqah Nik Shamsudin GS32658
Smartphone usage and the implecations among UPM’s students
2013
56. Noor Syarida Abdul Rahman GS32912
Students satisfaction towards service quality of front counter staff in private university
2013
57. Lim Ying Shing GS33076
Brand switching behavior over laptop brands among UPM students
2013
58. Saeid Pourseifaddini GS31290
An approach to long-‐term recovery procedure as part of local disaster recovery management: A study on earthquakes Zarand, Iran 2005.
2013
59. Alireza Rashidi GS33180
Application of value stream mapping in the furniture company
2013
60. Ong Yu Lee GS33061
Development of a program to calculate plastic material property for non linear FE Analysis
2013
61. Esadig Abdalla Mohammed Bushara GS31345
Fast moving consumer goods productivity improvement
2012
62. Seyed Sattar Emamian Failure Analysis of Welding process 2012
Page 13/80
GS30919
63. Nurul Zanariah Kolan GS31467
Maintenance IT equipment in training institute in Malaysia
2012
64. Mirmani Mehrbakhsh GS29222
casting in jewellery (loss wax investment casting)
2012
65. Amir Sayah Roshan Zamir GS31916
FEA in pressure vessel 2012
66. Farbod Redaei GS29281
Construction project management
2012
67. Sorosh Borozjani GS31299
FEA and improving wind turbine
2012
68. Hamed Niakan GS31711
Supply chain management
2012
69. Murugiah Sivasubramaniam
Back surface scribe ID for 200mm wafer fabrication 2011
70. Megat Mohd Amzari Megat Mohd Aris
Analysis of 2-‐stroke small engine emission system 2011
71. Firdaus Mohamed Sahid Chips formation and tool wear characteristics of turning operation
2011
72. Syarina Sharuddin
Analysis of plastic Injection moulding process 2011
73. Ishak Mohamad Ali
Integrated Fluid Parametric Analyser 2010
74. Zaidil Abdilla Ahmad Salehuddin
Project management of boat building and repair 2010
75. Noorhazilah Baharin Risk management – irrigation project using pressurized piping system
2010
76. Subramaniasarma a/l Sreenivasan
Simulation of thermoset manufacturing process 2010
77. Muhamad Hasnulhadi Mohamad Jaafar
Optimization of cutting parameter of tungsten carbide tool life turning process
2010
78. Safari Hj Mat Desa Project management in hatchery rainfall building system
2010
79. Zailani Zainal Abidin
Solid lubricant in machining process 2010
80. Nazrol Hj Mait
Comparison of dies to produce similar products 2010
81. Shamsuddin Man
Process parameter for rectangular deep drawing
82. Mohd Zairulnizam Mohd Zawawi
Analysis of an injection moulding parts using MoldFlow (feed system)
2010
Page 14/80
83. Roslan Mohamad Sharip Design of single cavity hot runner mould for juice cup
2010
84. Farah Zaheeda Kamaruddin
Diecasting Finishing surface 2010
85. Mahsa Hosseini Risk based maintenance in Unit 4 Steam Generator of Bandar Abbas Power Plant
2010
86. Syahrunizam Buyamin
Inventory Management System 2010
87. Sohaimi Pawanchi Improvement of CAD/CAM CNC process of gasing production
2010
88. Kaveh Faghihi Customer Knowledge Management
2010
89. Abdalsalam I. Fadeel Development hybrid software between visual basic and CAD/CAM for gasing
2010
90. Ahmed Osman Ahmed Babkir
Failure and successful strategic management in business Control and automation of manufacturing system
2010
91. Umar Ali Umar RFID: Control and automation of manufacturing system
2009
92. Mah Way Sheng Quality Management system
2009
93. Ahmad Rosli Abdul Manap
Design of PIM for gasing 2009
94. Zakaria A.Razak Study of 3D mouldflow analysis for plastic spinning top (gasing)
2009
95. Mohamad Oukal Alghali Fundamental characteristics of metal flow in casting mould of aluminium alloys
2008
96. Ahmed Alabedelah Design and development of Keyboardless Book-‐Style Notebook
2008
97. Mohd. Afandi Six Sigma project of Moulding Defect Reduction
2008
98. Mohammed Omran Wafi
Wettability of MMC 2007
99. Tarek Marwan Development of SiC reinforced MMC
2007
100. Zan Zainudin Die design and fabrication
2007
101. Amizi Noor Job-‐shop sequencing for small press shop
2007
102. Adel Abulgasm Lahimer Automated system of a Composite product fabrication
2007
103. Yuslan Yasok Design and development of press tool die for sheet metal product
2006
104. Azmi Harun Design and Analysis of mould for Plastic Injection 2006
Page 15/80
Bachelor of Eng (Mechanical) Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Jason Charles Rao Effect of Strontium and Vibration on the mechanical properties of Aluminium sand casting
2019
2. Edric Lo Zin Yiah Thermal and flow effect in casting process
2018
3. Nur Amani Abdul Nasir Simulation of casting process
2018
4. Mohammad Marwan Nazamdin
Effect of Strontium, vibration and heat treatment of Aluminium casting
2017
5. Noramalina Rosdan Casting of LM6
2017
6. Osama Alsaied Abdalla Eltaher
Plastic Injection Moulding parameters for high thickness and volume product
2016
7. Akram Saeed Aljaberi
Mechanical Propertiesof Al alloys vibration casting 2016
8. Syed Zaki Ahmed Improvement of metal properties by vibration casting technology
2015
9. Mohammad Afeef RP of polymer based Tops (Gasing)
2015
10. Mustika Ayu Muayanti Design and fabrication of rope machine
2014
11. Mohammad Zafirul Haris
Rice hush reinforced polypropylene composites 2014
12. Shanmugaprian Rajasagaran
Design and Fabrication of sundial 2013
13. Mohamad Asyraf Yusof Fabrication of plastic injection mould
2013
14. Shawali Mechanical properties of Aluminium extruded parts
2012
15. Firdaus Sand mould vibrator
2012
16. Faiz Design and improvement of fuel furnace
2012
17. Kamrul Design and fabrication of fuel furnace 1
2011
18. Azedi Design and fabrication of fuel furnace 2 2011
Moulding
105. Nur Elya Total Quality management in Perodua
2005
Page 16/80
19. Mohammad Fathullah Proton parts analysis
2010
20. Khairil Hazri Analysis and improvement of proton brake system 1
2010
21. Firdaus Lokman Al Hakim
Analysis and improvement of proton brake system 2
2010
22. Mohd Affindy Application of CAD/CAM in Spinning top (gasing) production
2009
23. Mohd Sharil Production of thermoplastic spinning tops (gasing)
2009
24. Erdy Herwan Design and fabrication of ropes (for spinning tops) machine
2009
25. Mohd Nasrol Design and fabrication of spinning tops (gasing) machine
2009
26. Radha Krishnan a/l Ponnan
Manufacturing of composite corrugated tubes 2008
27. Logeswaran a/l Kuppusamy
Core and pattern making of castings 2008
28. Fatin Suhana Mohd Ali
Metal flow and solidification of casting process 2008
29. Muhammad Firdaus Hamad
Characteristics of Green sand casting 2007
30. Mohd Azril Affindi Development of Squeeze casting products
2007
31. Karthik Poobalan Squeeze Casting process
2006
32. Weldaud Tulus Fabrication of composite products
2006
33. Lee Chee How Thermal Analysis of Casting process
2006
34. Ardy Affendy Squeeze casting for MMC
2006
35. Loo Boon Kian Experimental studies on bullet-‐proof vest (Kevlar) with different stitching patterns
2005
36. Mohd Nazarudin Amir Kajian pembentukan vortex dalam pengacuan cecair komposit matrik logam (Study of vortex development in stirring of metal matrix composite)
2005
37. Ilani Yaacob Experimental investigation of 3-‐Component Balance
2004
38. Harliza Mohd Yusof Fan system of Wind Tunnel
2004
39. Ahmad Mortaza Pattern making using CAD/CAM system
2004
40. Afdiman Anuar Mechanical engineering services in construction industry
2003
Page 17/80
41. Mohd Nadzru Abd. Rahman
Development of casting software
2003
42. Mohd Aatif Ali Mokhtar Development of emergency tube for motorcycles 1
2003
43. Mohd Rizal Adnan Development of emergency tube for motorcycles 2
2003
44. Md. Shahril Mohamad Ambia
Kajian Keupayaan relau induksi di Makmal Foundri, (Study of Induction Furnace Performance II)
2002
45. Yusman Suratman Kajian Keupayaan relau induksi di Makmal Foundri (Study of Induction Furnace Performance 1)
2002
46. Hazarudyn Syah Halim Development of three components balance for wind tunnel 1
2002
47. Mohd Aznor Lamat Development of three components balance for wind tunnel 2
2002
48. Khairul Arif Ahmad Mahir
Development of sand casting process 2002
49. Mohamad Zamri Jahaya Emergency Tube System for Motocycles
2001
50. Leong Yew Boon Software Development of Flow Analysis of Casting
2001
51. Hafizal Abu Bakar Design and Fabrication of Wind Tunnel Instrumentation
2001
52. Liom Hong Seng Software Development of Thermal Analysis of Casting
2001
53. Muhammad Faizal Johan Analisa Aliran Proses Acuan Suntikan Plastik (Analysis of process flow in Plastic Injection Moulding)
2000
54. Tan Chen Loon Eksperimentasi Analisa Haba Dalam Proses Penuangan Pasir (Experimental analysis of heat transfer in sand casting process)
2000
55. Lai Tze Siung Thermal Analysis of Sand Casting
2000
56. Goh Chin Hoi Design and Fabrication of Plastic Injection Mould I
2000
57. Chong Joo Kwong Design and Fabrication of Plastic Injection Mould II
2000
58. Liew Chee Kin Runner system in Plastic Injection Moulding
1999
59. Lim Wei Siang CAD/CAM application in Plastic Injection Moulding 1
1999
60. Mohd Khudzairi Hj Razali CAD/CAM application in Plastic Injection Moulding 2
1999
61. Shahid Sham Md Nor Product development in Plastic injection moulding 1
1999
62. Azaham Mohd Razali Product development in Plastic injection moulding 2
1999
63. Hassan Fahmi Miskam Molten metal flow in casting process
1999
Page 18/80
64. Amirudin Abdul Aziz Thermal analysis of sand casting
1999
65. Md. Fauzi Ismail A study on successful certification of ISO 9000 for Manufacturing Companies
1998
66. Mohd Badli Hj Ibrahim Experimental preparation of thermal study in sand casting process
1998
67. Irwan Mohd Amir Design and fabrication of mould for plastic injection moulding 1
1998
68. Yusri Yusoff Design and fabrication of mould for plastic injection moulding 2
1998
69. Aminuddin Abd. Aziz CAD/CAM application in mould making
1998
70. Alias Ahmad An application of robot and conveyor belt for automated handling system
1998
71. Safry Matnor Design, Fabrication and Testing of a weather strip machine
1997
72. Majid Yahya Development of CAD/CAM of casting process
1997
73. Mohd Arifin Samingun Mould testing and investigation of flow characteristics of injection moulding machine
1997
74. Chin Yong Keong Design and Development of an automated orientation detection system with robot arm and Programmable Logic Control integration
1996
75. Wan Shaifuddin Wan Hashim
Analisa terma pemejalan dalam proses penuangan (Thermal analysis of solidification in casting process)
1996
76. Daniel Sahari Rekabentuk dan pembinaan acuan mesin pengacuan suntikan plastik (Design and fabrication of a mould for plastic injection moulding machine)
1996
77. Abdul Razak Jaafar Analisa aliran logam dan perbandingan dengan eksperimen (Metal flow analysis and comparison with experimental results)
1996
78. Ahmad Rashidi Sabudin Kajian aliran plastik dalam mesin pengacuan suntikan (Study of plastic flow in plastic injection moulding machine)
1995
79. Tang Sai Hong Gating system design in sand casting
1995
80. Tham Chee Keen Computer aided fluid flow analysis of the filling of casting system
1994
81. Saravanan s/o Manickam Analysis of molten metal flow in the feeding system of pressure diecasting
1993
F. Research, Consultancy and Patents
Page 19/80
a. Research and Grant
Total Accumulated Funding : RM8,225,767 Local Government Funding : RM5,765,767 International Funding : RM2,460,000
No Duration Title Funding Amount(RM) Designation
1. Aug 2016-‐Sept 2018
International Research with University for Kuwait Project
Kuwait RM360,000 PI
2. Nov 2015-‐Oct 2017
In-‐situ Titanium Diboride (TiB2) reinforced by Aluminium Alloy hybrid Metal matrix composites
FRGS RM104,000 PI
3. Jan 2016-‐ jan 2018
The customers expression towards the design profile and attributes of products
Research Acculturation Collaborative Effort (RACE)
RM70,000 PI
4. 2014-‐2015 Mathematical Modelling of Flow and Heat Transfer for Casted Aluminium Silicon Carbide
Research Acculturation Collaborative Effort (RACE)
RM70,000 PI
5. June 2013-‐Oct 2015
Characterization and development of natural fibre reinforced unsaturated polyester based injection moulding composite material for electrical insulation application
FRGS RM90,500 PI
6. Feb 2011-‐Dec 2013
Investigation on the tailing sand (pasir bekas lombong) from ex-‐tin mines in Peninsular Malaysia dor use in making green sand casting mould
FRGS RM52,000 PI
7. March 2011-‐Dec 2013
Mecahnical properties of MMC LM6 reinforced titanium carbide using Mechanical vibration mould sand casting.
UPM RUGS RM134,500 PI
8. Oct 2010-‐June 2013
Aluminium alloy properties improvement in extrusion process
UPM RUGS RM150,000 PI
9. Nov 2007-‐ Oct 2009
Analysis of molten metal, solidification and the effect of vibration of metal matrix composite (MMC) materials in casting process
FRGS RM114,500 PI
Page 20/80
10. Oct 2007-‐ Sept 2009
Manufacturing of metal matrix composite by squeeze casting technology for automotive applications
Sciencefund RM154,400 PI
11. July 2007-‐ Jun 2009
Metal flow and Solidification of Casting Process
UPM RUGS RM70,000 PI
12. April 2007-‐March 2010
Microstructure and mechanical properties of squeeze cast A356 Al-‐Si alloy inoculated with TiC
ScienceFund RM92,498 PI
13. March 2004-‐ Oct 2005
Study of Lift and Drag Forces of Aerodynamic Shapes in the Low Speed Wind Tunnel
UPM RUGS RM50,000 PI
14. Jan 2002-‐Dec 2006
Development and Analysis of Casting Product using Network Method of Flow and Solidification Process
IRPA Experimental Applied Research
RM168,000 PI
15. Jun 2002-‐Jun 2003
Design and Fabrication of Three-‐Component Balance of Wind Tunnel.
UPM Short Term Research Project
RM15,000 PI
16. Jun 1999-‐ Jun 2000
Design and Fabrication Wind Tunnel Instrumentation
UPM Short Term Research Project
RM10,000 PI
17. Jun 1999-‐ Jun 2000
Design and Fabrication of Plastic Injection Mould
UPM Short Term Research Project
RM15,000 Pi
18. August 1995-‐ Jan 1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources of Malaysia
RM159,471 PI
19. 1996-‐2000 Finite Element Modelling of Casting Process
IRPA -‐MOSTI RM268,000 PI
20. Oct 1995-‐March 1996
Pre-‐stressed Fabrication Process for Filament Winding Tubes
University of Akron and Asian Development Bank
US15,000 PI
21. 1991-‐1995 Finite Element Analysis for Stress, Thermofluid and Vibrations
IRPA-‐MOSTI RM550,000 PI
22. 2019-‐2021 The Synergistic Effects of Graphene Nanoparticles and Chilled Air Cooling on Machinability of Nickel-‐Titanium Shape Memory Alloys
FRGS (UNIMAP)
RM100,000 Co
Page 21/80
23. 2019-‐2021 Formulation of 7075 wrought aluminium optimum processing parameters model based on parametric thixotropy approach through semisolid metal processing
FRGS (UMP) RM100,000 Co
24. 2019-‐2021 Elucidate the interaction mechanism of Al-‐1061 coating and nano-‐Al2O3 reinforcement to the mechanical strengthening on the Mg AZ91A metal matrix composite
FRGS (UMP) RM88,320 Co
25. 2019-‐2021 Enhancement of Mechanical Properties of Al-‐Metal Matrix Composites by Grain Refinement with ZrB2 and Sc
RACER RM71,200 Co
26. 2014-‐2016 Parameters Optimization For Machining CFRP-‐Aluminum Composite Laminates
Science Fund (MOSTI)
RM151,000 Co
27. 2012-‐2014 Development of an integrated Value Added Engineering methodology for Automotive Parts
FRGS RM68,000 Co
28. July 2007-‐Jun 2009
Development of Combinatorial Optimisation for Cutting tool path strategy
UPM RUGS RM70,000 Co
29. 2010-‐2012 Development of a Novel Evolutionary Algorithms for AGV Dynamic Routing In FMS Environment
RUGS RM55,000 Co
30. 2009-‐2011 Value Engineering link-‐up with university program Proton saga
PROTON RM30,298 Co
31. 2007-‐2009 Development of Combinatorial Optimisation for Cutting tool path strategy
RUGS RM70,000 Co
32. 2007-‐2009 Cutting Tool Path Optimisation Using Evolutionary Algorithm
FRGS RM100,000 Co
33. 2007-‐2008 Simulation of Cutting Tool Path Strategy for Thin Walled Section Part
NLSG (UPM) RM10,000 Co
34. 2007-‐2009 Analysis of flow and solidification of casting process
RUGS RM83,000 Co
35. 2002-‐2006 Damage Management of Sheet metal Forming Using Virtual Manufacturing
IRPA -‐ MOSTI RM168,000 Co
36. 2002-‐2006 Development of Artificial Intelligent (AI) Based Expert System for
IRPA -‐ MOSTI RM164,000 Co
Page 22/80
Optimum Turning Process
37. 2002-‐2006 Concurrent Engineering Manufacturing System of Polymeric – Based Composite Automotive Pedal Box
IRPA -‐ MOSTI RM99,080 Co
38. 1991-‐1995 Computer Integrated Manufacturing (CIM)
IRPA -‐ MOSTI RM2,000,000 Co
Fellowship Grant
No. Duration Title Funding Type Designation
1. Jan 1994-‐April 1994
Research attachement with Beijing University
UNESCO (USD 30,000)
Travel and other expenditure
Researcher
2. March 1995-‐May 1995
Research Attachment with Swansea University and Casting Industry
Asian Development Bank (USD50,000)
Research fund, Travel and other expenditure
Researcher
3. Oct 1995-‐March 1996
Research Attachemnt with Akron University, Ohio USA
Asian Development Bank (USD50,000)
Research Fund, Travel and other expenditure
Researcher
b. Consultancy No Durati
on Title Funding Designation
1. 2015-‐2019
Reference Module of Material Science and Enginineeirng
Elsevier Editor/Reviewer
2. 2012-‐2014
Kuantan (Master of Manufacturing System Engineering)
Kuantan Program
Expert (Teaching Courses – Advanced Manufacturing Process and Technology and Automation and Robotic)
3. 2012-‐2014
Kuwait (Master of Engineering Program)
Kuwait Program Expert (Teaching Course – Automation and Robotic and Total Quality Management)
4. 2002-‐2014
Evaluation of final exam paper of INTI
INTI University Expert (Engineerring Courses)
5. 2010 Engineering Design Course
UPM Education & Training Sdn. Bhd.
Expert (Teaching Courses)
Page 23/80
6. 1999-‐2004
Mould and Die Technology German Malaysia Institute
External Verification of the student Project
7. 2002 Study of the pump characteristics and performance
PEDECO Management Sdn Bhd
Head (Research Contract)
8. 1994-‐1998
Development of Engineering Curriculum for MSc in Manufacturing Systems Engineering
MOTOROLA Seremban
Expert (Curriculum and Engineering Courses)
9. 1995-‐1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources, Malaysia
Head (Research Contract)
c. Patent/ Copyright/ Trademark
No Detail
Registration No Year
1. A self-‐propelled hydraulic floor crane
PI2012001330 2012
2. Plastic Made Gasing Top (Commersialiased by MJ Square Sdn Bhd)
PI2012000680 (Malaysia) 2012
3. Plastic Made Gasing Top
PCT/MY2013/000028 2013
4. Plastic Made Gasing Top (Indonesia)
P00201404828 2014
5. Plastic Made Gasing Top (Thailand)
1401004719 2014
6. Plastic Made Gasing Top (Vietnam)
1-‐2014-‐02723 2014
7. Plastic Made Gasing Top (Singapore)
11201404479X 2014
8. Plastic Made Gasing Top (Brunei)
BN/N/2014/0073 2016
9. Apparatus for producing Corrugated Composite Structure and method for making the same
PI 20063841 MY162281A
2006 2017
G. Publications
Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy
1. M.S.J. Hashmi and S.Sulaiman, Material Application, Performance and Life Cycle. Reference Module on Materials Science and Materials Engineering: Elsevier Ltd, Dec 2015.
2. S.M. Sapuan, M.D. Azaman, S.Sulaiman, E.S. Zainudin and A. Khalina, Processibility in moulding thin-‐walled part using lignocellulosic fibre composite (wood polymer composite), in S,M, Sapuan (eds.) Manufacturing of Natural Fibre Reinforced Polymer Composites Hardcover 1st Edition: Springer International Publishing AG, Cham (ZG) Switzerland.
Page 24/80
3. M. Sayuti, S.Sulaiman, B.T.H.T Baharudin and M.K.A. Ariffin, Metal Matrix Composite Products by Vibration Casting Method, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04082-‐0.
4. T.R. Sahroni and S.Sulaiman, Application of Nonlinear Thermal Expansion Model for Casted Alumnium Silicone Carbide, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04130-‐8.
5. S. Sulaiman and S.Emamian, Optimum Speed of Friction Stir Welding on 304L Stainless Steel by Finite Element Method. In Comprehensive Materials Processing; Bayraktar, E., Ed.; Elsevier Ltd., 2014; Vol. 6, pp 227–236.
6. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and their properties, Chapter 18, InTech Pub. (2012)
7. Daryoush Safarzadeh and Shamsuddin Sulaiman, “Self-‐Propelled Hydraulic Floor Crane – Design, Development and Manufacturing”, LAMBERT Academic Publishing, Saarbrucken Germany 2012. ISBN: 978-‐3-‐659-‐18991-‐3
8. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012), Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and Their Properties, Intech, 978-‐953-‐51-‐0711-‐8
9. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 1, SIRIM Press, 1998
10. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 2, SIRIM Press, 1998
11. Shahnor Basri, Shamsuddin Sulaiman, A. Rahim Md. Amin, “Sistem Pengeluaran -‐ Satu Pengenalan (Production System -‐ An Introduction)”, Book published by Dept. of Mechanical and Systems Engineering UPM 1987
Citation Index Journals (CIJ)
Total = 237 papers JCR/Quartile and IF journal = 91 papers Citation Index Journal (CIJ) = 146 papers (Scopus and Other Index)
a. Citation Index JCR/Quartile and IF Journals
Total = 91 papers After 2007 = 59 papers 2007 and below = 32 papers
No Article Journal Year/
Quartile/ Impact Factor
1 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and
M.K.Talari “Characterization of aluminium-‐silicon (Al-‐Si) cast alloy refined with titanium diboride (TiB2) and Scandium (Sc)”, Journal of Mechanical Engineering, Vol SI 5(1), 62-‐70, 2018.
Mechanical Engineering
2018 Q4
IF=0.871
Page 25/80
2 S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan,
“ Physical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC) for Compression Moulding”, Materials Today, 2018, 5(1), pp. 1226-‐1232.
Materials Today 2018 Q1
IF=24.373
3 Q.M. Azpen, B.T.H.T.Baharudin, S.Shamsuddin and F. Musapha , “Effect of process parameters on the surface roughness of aluminum alloy AA 6061-‐T6 sheets in frictional stir incremental forming” , Advances in Production Engineering and Management, 2018. 4.299.
Advances in Production
Engineering and Management
2018 Q3
IF=2.047
4 R.Rosmamuhamadani, M.K.Talari, Sabrina, M.Yahaya, S.Sulaiman, M.I.S, Ismail, M.A, Azmah Hanim, “Corrosion Characterization of In-‐Situ Titanium Diboride (TiB2) Reinforced Aluminium-‐Copper (Al-‐Cu) Alloy by Two Methods : Salts Spray Fog and Linear Polarization Resistance (LPR)”, Applied Physics Letters, Vol 1963, Issue 1.2018.
Applied Physics Letters
2018 Q1
IF=3.521
5 Mehran Tamjidy, B. T. Hang Tuah Baharudin, Shahla Paslar, Khamirul Amin Matori, Shamsuddin Sulaiman and Firouz Fadaeifard, “Multi-‐Objective Optimization of Friction Stir Welding Process Parameters of AA6061-‐T6 and AA7075-‐T6 Using a Biogeography Based Optimization Algorithm”, Materials 10 (5), (2017), pp 533-‐551.
Materials 2017 Q1
IF=2.467
6 Dehghan, S. , Ismail, M.I.S., Ariffin, M.K.A., Baharudin, B.T.H.T., Sulaiman, S., “Numerical simulation on friction drilling of aluminum alloy: Numerische Simulation des Reibbohrens von Aluminiumlegierunge”, Materialwissenschaft und Werkstofftechnik, 48 (3), (2017), pp 241-‐248.
Materialwissenschaft und
Werkstofftechnik
2017 Q4
IF=0.625
7 M.A.Ishak, S.Sulaiman, B.T.H.T.Baharudin and Z.N. Ismarrubie, “ Effect on Mechanical Properties of ship propeller with vibration mold castings”, (2017). Advanced Science Letters 23(5), pp. 4378-‐4382.
Advanced Science Letters
2010 Q2
IF=1.253 2017-‐scopus
8 B.T.H.T.Baharudin, Q.M.Azpen, Shamsuddin Sulaiman and F.Mustapha, “Experimental investigation of forming forces in frictional stir incremental forming of Aluminium alloy AA6061-‐T6”, Metals – Open Access Metallurgy Journal 11/2017: 7(11), 484.
Metals 2017 Q3
IF=1.704
9 N. Fatchurrohman and S. Sulaiman, “Solidification analysis in permanent mould casting of aluminium alloy LM6 reinforced titanium particulates metal matrix composite” , Materials Science Forum, Vol. 889, (2017). pp 148-‐151.
Materials Science Forum
2005 Q3
IF=0.399 2017-‐scopus
10 R.E. Ibrahim, R. Rosmamuhamadani, M.K. Talari, S. Sulaiman and M.I.S. Ismail, “Preliminary Study on Properties of Aluminium-‐Silicon (Al-‐Si) Alloys Reinforced by In Situ Titanium Diboride (TiB2)” , Key Engineering Materials, Vol 737,(2017). pp11-‐15.
Key Engineering Materials
2005 Q2
IF=0.224 2017-‐scopus
11 J. Nemati, G.H.Majzoobi, J.Pipelzadeh and S. Sulaiman, “Characterization of mechanical properties of Al-‐6063 deformed by ECAE”, Int. Journal of Advanced manufacturing Technology, 2016, 84(1-‐4), pp 663-‐672.
Advanced Manufacturing Technology
2016 Q2
IF=2.209
12 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari, “ Mechanical and microstructure characterization of
Key Engineering Materials
2005 Q2
Page 26/80
aluminium-‐copper (Al-‐Cu) reinforced with in-‐situ Titanium Diborate (TiB2)”, Key Engineering Materials Vol. 673 (2016) pp117-‐125.
IF=0.224 2016-‐scopus
13 N.Fatchurrohman and S.Sulaiman, “Solidification analysis in permanent mould casting of Al-‐alloy reinforced TiCp Metal Matirx Composites”, Materials Science Forum, (2017), Vol. 889, pp 148-‐151.
Materials Science Forum
2005 Q3
IF=0.399 2017-‐scopus
14 J. Nemati, G.H.Majzoobi, S. Sulaiman, B.T.H.T.Baharudin, and M.A.Azmah Hanim, “Effect of equal channel angular extrusion in Al-‐6063 bending fatique characteristics”,Int. Journal of Minerals Metallurgy and Materials, April 2015, Vol 22, Issue 4, pp 395-‐404.
Minerals Metallurgy and Materials
2015 Q3
IF=0.882
15 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-‐Walled Parts Formed Using the Injection-‐Moulding Process”, Int. Journal of Polymer Science, 2015, 659321.
Polymer Science 2015 Q3
IF=1.0
16 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Optimization and numerical simulation analysis for molded thin-‐walled parts fabricated using wood-‐filled polypropylene composite via plastic injection molding”, Polymer Engineering and Science,(2015), 11(1), pp. 2531-‐2540.
Polymer Engineering and
Science
2015 Q2
IF=1.719
17 Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Shah Ismail, Azmah Hanim Mohamed Arif, and Mahesh Kumar Talari, “Wear Properties of Metal Matrix Composite Al-‐Cu and Al-‐Cu-‐TiB2”, Material Science Forum Vol 819 (2015) pp268-‐273.
Materials Science Forum
2005 Q3
IF=0.399 2015-‐scopus
18 H. M. Magid, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-‐5), 2014.
Materials Research Innovations
2014 Q2
IF=0.83
19 J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin and M.A.Azmah Hanim, “Finite Element and metallurgical study of properties of deformed pure copperby ECAE at various strain rates”, Proc ImechE Part C: J Mechanical Engineering Science 2014. Vol 228(9) pp1461-‐1473.
Mechanical Engineering Science
2014 Q4
IF=0.56
20 M.D.Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin and A.Khalina, “ Numerical simulation analysis of the in-‐cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-‐walled parts formed by the injection moulding process”, (2014) Materials and Design 55, pp. 381-‐386.
Materials and Design
2014 Q1
IF=3.501
21 M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-‐901, 2014.
Materials Science Forum
2005 Q3
IF=0.399 2014-‐scopus
22 M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-‐347, 2014.
Materials Science Forum
2005 Q3
IF=0.399 2014-‐scopus
23 M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical
Materials Science Forum
2005 Q3
Page 27/80
Properties of Al-‐11.8% Si Matrix Composites”, Materials Science Forum 773, 195-‐202, 2014.
IF=0.399 2014-‐scopus
24 A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-‐Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-‐217, 2014.
Materials Science Forum
2005 Q3
IF=0.399 2014-‐scopus
25 M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-‐774 (2014) pp 841-‐849.
Materials Science Forum
2005 Q3
IF=0.399 2014-‐scopus
26 T.R. Sahroni and S.Sulaiman, “Casting quality model for casted aluminium silicon carbide based on non-‐linear thermal expansion”, Int. J. Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, 2014, pp217-‐233.
Materials and Product Technology
2014 Q4
IF=0.261
27 Amer N.N.Kakahy, D.Ahmad, Md. Akhir, S.Sulaiman and Ishak A, “Effects of knife shapes and cutting speeds of a mover on the power consumption for pulverizing sweet potato vine”, Key Engineering Materials Vols. 594-‐595 (2014) pp1126-‐1130.
Key Engineering Materials
2005 Q2
IF=0.224 2014-‐scopus
28 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S.Zainudin, K.Abdan and M.R.Mansor, “An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat-‐thin walled parts by Injection moulding process”, Materials and Design 50 (2013) 451-‐456.
Materials and Design
2013 Q1
IF=3.171
29 S.Sreenivasan. S.Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin and K. Abdan, “Recent developments of kenaf fibre reinforced thermoset composites: review”, Int. Journal of Materials Research Innovation , Vol.17, Suppl 2, (2013), pp s2-‐1 –s2-‐11.
Materials Research Innovation
2013 Q4
IF=0.398
30 M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Shrinkages and warpage in the processability of wood-‐filled polypropylene composite thin-‐walled parts formed by injection molding”, Materials & Design, 2013.vol 52, pp1018-‐1026.
Materials and Design
2013 Q1
IF=3.171
31 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of cutting speeds and moisture content on grass chopping (pulverizing)”, Advanced Science letters, Vol 19, No. 9, Sept 2013, pp. 2533-‐2535.
Advanced Science Letters
2010 Q2
IF=1.253 2013-‐scopus
32 T.S. Hong, R. Samin, S. Sulaiman and Weria Khaksar, ‘Development of an Educational Robotic Training Kit”, Int. Journal of Advanced Science Letters (2013) 19 (11) pp. 3304-‐3306.
Advanced Science Letters
2010 Q2
IF=1.253 2013-‐scopus
33 Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-‐39, 2012.
Advances in Mechanical Engineering
2012 Q2
IF=0.575
34 Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite
Advances in Mechanical Engineering
2012 Q2
IF=0.575
Page 28/80
Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-‐17, 2012 .
35 Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, 2012. Volume 19, Number 8, pp. 2343-‐2346(4).
Advanced Science Letters
2010 Q2
IF=1.253 2012-‐scopus
36 Ali Hashemi, Desa Ahmad, Jamarei Othman and Shamsuddin Sulaiman, “ Development and testing of a new tillage apparatus”, Journal of Agricultural Science;, Vol. 4. No. 7; (2012), pp. 103-‐106.
Agricultural Science 2012 Q1
IF=1.157
37 M.K.A Ariffin, S.Sulaiman, Tang S.H., M.Roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519-‐524, 2012.
Advanced Science Letters
2010 Q2
IF=1.253 2012-‐scopus
38 M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-‐11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-‐15, 2012 .
Advanced Science Letters
2010 Q2
IF=1.253 2012-‐scopus
39 A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-‐23, 2012.
Advances in Mechanical Engineering
2012 Q2
IF=0.575
40 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A., “Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing)”, Advanced Science Letters, (2012).
Advanced Science Letters
2010 Q2
IF=1.253 2012-‐scopus
41 S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental investigation of solidification casting process”, Key Engineering Materials, volume 417-‐472, pp 601-‐605, 2011.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus 42 N.Fatchurrohman, S.Sulaiman, M.K.A M Arrifin, A.A Faieza and B.T.H.T.
Baharudin, “Metal matrix composites: solidification parameters of aluminium-‐11.8% silicon alloy reinforced with titanium carbide particulates”, Key Engineering Materials, volume 417-‐472, pp 1081-‐1084, 2011.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus
43 Mohd Sayuti, S. Suraya, Shamsuddin Sulaiman, T.R. Vijayaram, Mohd Khairol H. Arifin, B.T. Hang Tuah Baharudin, “Thermal Investigation of Aluminium -‐ 11.8% Silicon(LM6) Reinforced SiO2-‐Particles”, Material Processing Technology II, Vol 264-‐265, pp 620-‐625, 2011. (IF=4.178) Q1
Material Processing Technology
2011 Q1
IF=2.236
44 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “Influence of cutting parameters on surface roughness for wet and dry turning process”, Key Engineering Materials, volume 417-‐472, pp 227-‐232, 2011.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus 45 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, T.R.
Vijayaram and S.Suraya, “Effect of Quartz-‐silicon dioxide particulate on Key Engineering
Materials 2005 Q2
Page 29/80
tensile properties of aluminium alloy cast composites”, Key Engineering Materials, volume 417-‐472, pp 727-‐732, 2011.
IF=0.224 2011-‐
scopus 46 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, S.Suraya and
E.Gholamreza, “Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite”, Key Engineering Materials, volume 417-‐472, pp 721-‐726, 2011.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus
47 M.K.A M Arrifin, S.Sulaiman, B.T.H.T Baharudin, T.S. Hong and S. Sreenivasan, “Simulation of thermoset injection for bulk mulding compounds (BMC)”, Key Engineering Materials, volume 417-‐472, pp 1101-‐1106, 2011.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus 48 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Determining the spray
droplet size spectrum from a dual-‐purpose rotary disc chemical applicator”, Int. Journal of Physical Science 2011.
Physical Science 2011 Q2
IF=0.54
49 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Distribution pattern assessment of a dual-‐purpose rotary disc Chemical applicatior”, Transaction of the ASABE 2011.
ASABE 2011 Q2
IF=0.895
50 D.Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “The design process of a self-‐propelled floor crane”, 2011 Journal of Terramechanics 48 (2), pp.157-‐168.
Terramechanics 2011 Q4
IF=1.417
51 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “An investigation into the hook dynamics and effect of hook parameters on the sway angles in hydraulic cranes ”, Scientific Research and Essays Vol. 6(6), pp. 1303-‐1316, 18 March, 2011.
Scientific Research and Essays
2011 Q3
IF=0.445
52 Fatai B. AKANDE, Desa AHMAD, Othman JAMAREI, Samsuddin SULAIMAN, l Adepoju B. FASHINA and Hossein SHAMSABADI, “Investigation studies on the effects of tyre inflation pressure on the motion resistance of pneumatic bicycle wheels on hard and deformable surface”, Journal of Agricultural Science, 2011, 7(3), pp317-‐323.
Agricultural Science 2011 Q1
IF=3.812
53 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “ Influence of cutting parameters on surface roughness for wet and dry turning process”, 2011 Key Engineering Materials 471-‐472, pp. 233-‐238.
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus 54 F.B.Akande, D.Ahmad, O.B.Jamarei, S.Sulaiman, and A.B.Fashina, “
Empirical determination of the motion resistance of pneumatic bicycle wheels for on and off-‐road performance”, African Journal of Agricultural Research 5(23), pp. 3322-‐3332.
Agricultural Research
2011 Q3
IF=263
55 A. Azhar, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, and T.R. Vijayaram, “The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould”, Key Engineering Materials, volume 417-‐472, pp 769-‐774, 2011 .
Key Engineering Materials
2005 Q2
IF=0.224 2011-‐
scopus
56 M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman,”Bead-‐sort algorithm for load shuffling in miniload ASRS”, Computers and Industrial
Computers and Industrial
2009 Q2
Page 30/80
Engineering, CIE 2009 . art. No 5223906, pp 1781-‐1786.
Engineering IF=1.783
57 P. Matoorian, S.Sulaiman and M.M.H.M.Ahmad, “An experimental study for optimization of electrical discharge turning (EDT) process”, Int. Journal of Materials Processing Technology 204 (2008) 350-‐356.
Material Processing Technology
2008 Q2
IF=2.236
58 Elfetori F.Abdewi, Shamsudeen Sulaiman, A.M.S.Hamouda and E.Mehdi,”Quasi-‐static axial and lateral crushing of radial corrugated composite tubes”, Int. Journal of Thin-‐walled Structures, 46 (2008) 320-‐332.
Thin-‐walled Structures
2008 Q2
IF=1.749
59 S.Sulaiman, M.Sayuti and R.Samin,”Mechanical properties of the as-‐cast quartz particulate reinforced LM6 Alloy matrix composite”, Int. Journal of Materials and Processing Technology 201 (2008) 731-‐735.
Material Processing Technology
2008 Q2
IF=2.236
60 S.H.Tang, Y.J.Tan, S.M.Sapuan, S. Sulaiman, N.Ismail and R. Samin, “The use of Taguchi method in the design of plastic injection mould for reducing warpage”, Int. Journal of Materials and Processing Technology , Vol 182 (2007), pp 418-‐426.
Material Processing Technology
2007 Q2
IF=2.236
61 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ’Bahaviour of axially and laterally crushed corrugated composite tubes’, Int. Journal of Mechanical Engineering Science, JMES435, July 2006.
Mechanical Engineering Science
2006 Q3
IF=0.56
62 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Fabrication of fiber reinforced metal matrix composites by squeeze casting technology”, Int. Journal of Materials and Processing Technology , 178 (2006) 34-‐38.
Material Processing Technology
2006 Q2
IF=2.236
63 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Int. Journal of Materials and Processing Technology , 172(2006) 394-‐399.
Material Processing Technology
2006 Q2
IF=2.236
64 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Numerical simulation of casting solidification in permanent metallic moulds”, Int. Journal of Materials and Processing Technology , 178(2006) 29-‐33.
Material Processing Technology
2006 Q2
IF=2.236
65 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries”, Int. Journal of Materials and Processing Technology , 178 (2006), pp39-‐43.
Material Processing Technology
2006 Q2
IF=2.236
66 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of shape and geometry on the energy absorption capability of fiberglass composite tubes”, Int. Journal of Composites Science and Technology, August 2005.
Composites Science and Technology
2005 Q1
IF=3.569
67 C.K.Ooi, M.M.H.M.Ahmad, S.Sulaiman, “Proposing a non-‐traditional ordering methodology in achieving optimal flexibility with minimal inventory risk”, Asia Pacific Journal of Marketing and Logistics, Vol. 17, 1 2005, pp 12-‐18.
Marketing and Logistics
2017 Q4
IF=1.276 2005 scopus
69 S.H.Tang, Y.M.Kong, S.M.Sapuan, R.Samin, S.Sulaiman, “Design and Material Processing 2006
Page 31/80
thermal analysis of plastic injection moulding”, Int. Journal of Materials and Processing Technology , 171 (2006) pp259-‐267.
Technology Q2 IF=2.236
69 S.S.S.Imihezri, S.M.Sapuan, S.Sulaiman, M.M.Hamdan, E.S. Zainudin, M.R.Osman and M.Z.A.Rahman, “Mould flow and component design analysis of polymeric based composite automotive clutch pedals”, Int. Journal of Materials and Processing Technology 171 (2006) 358-‐365.
Material Processing Technology
2006 Q2
IF=2.236
70 Y.P.Lim, S. Sulaiman, A.M.Hamouda and M.M.H.M.Ahmad,”Grain refinement of LM6 Al-‐Si alloy sand castings to enhance mechanical properties”, Int. Journal of Materials and Processing Technology,Vol 162-‐163 (2005) pp435-‐441.
Material Processing Technology
2005 Q2
IF=2.236
71 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman and M.Hamdan, “Simulation of fill time injection moulding process for composite pedals using mould flow analysis software”, Mech. Eng. Journal, Vol. 5 (2005), pp 7-‐10.
Mechanical Engineering
2005 Q4
IF=0.871
72 S.Sulaiman, Y.P.Lim, T.R. Vijayaram, A.M.S. Hamouda and M.M.Hamdan, “An Experimental Investigation on Alumunium-‐Silicon Alloy Sand Castings to Study the Microstructure-‐Property Correlation Influenced by Solidifiation Rate”, Int. Journal of Materials and Processing Technology, MSH1750, 2004,pp1-‐13.
Material Processing Technology
2005 Q2
IF=2.236
73 S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Int. Journal of Materials and Processing Technology, 155-‐156 (2004), pp1723-‐1726.
Material Processing Technology
2004 Q2
IF=2.236
74 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A study on comparison of ‘V’ and ‘X’ ribbing in composite pedal using mold flow analysis software”, Int. Journal of Materials and Design, Elsevier, 2004, pp78-‐84.
Materials and Design
2004 Q3
IF=0.636
75 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman,”A Development and Comparative Study of Two Rapid Prototyping Processes of An Automotive Composite Pedal Box System, Int. Journal of Advanced Manufacturing Technology, Vol 5,2003, pp5-‐8.
Advanced Manufacturing Technology
2003 Q3
IF=1.453
76 M.Y.Rosnah, M.M.H.M. Ahmad, S.Sulaiman and Z.Mohamad, “Increasing competitiveness through advanced manufacturing technologies”, Int. J. Manufacturing Technology Management, Vol. 5, No. 4, 2003, pp. 371-‐379.
Manufacturing Technology Management
2017 Q2
IF=2.194 2003 scopus
77 S.Sulaiman, S.H.Tang and M.S.J. Hashmi, “Rapid Prototyping System by Precision Robotic Manipulator”, Journal of Intelligent Manufacturing, (2003). pp56-‐62.
Intelligent Manufacturing
2003 Q3
IF=1.731
78 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites”, Journal of Plastics Rubber and Composites, (2004), pp68-‐73.
Plastics Rubber and Composites
2004 Q4
IF=0.583
79 S.Sulaiman, A.M.S. Hamouda, “Solidification Analysis of Sand Casting Process”, Journal of Materials and Processing Technology, Casting Technology Special Volume, (2002) pp. 46-‐52.
Material Processing Technology
2002 Q3
IF=1.0
Page 32/80
80 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad and M. Hamedullah, “A comparison of computational simulation and experimental results in short fibre reinforced injection molded polycarbonate composites”, Journal of Materials and Processing Technology (2002) pp125-‐130.
Material Processing Technology
2002 Q3
IF=1.0
81 A.M.S.Hamouda, S.Sulaiman, C.K. Lau “Finite Element Thermal Analysis on the effect of workpiece geometry on the quenching of ST50 steel”, Int. Journal of Material Processing Technology, Vol 119(2001) pp. 354-‐360.
Material Processing Technology
2001 Q3
IF=1.0
82 S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental investigation of metal filling system in diecasting process” , Int. Journal of Material and Processing Technology, Vol 119 Issue 1 (Dec 2001) pp 268-‐272.
Material Processing Technology
2001 Q3
IF=1.0
83 S.Sulaiman, A.M.S.Hamouda, “Modelling of the thermal history of sand casting process”, Int. Journal of Material Processing Technology, Vol 113 Issue 1(June 2001) 245-‐250.
Materials Processsing Technology
2000 Q3
IF=0.5
84 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman , M.M.Hamdan, “Development of CAD/CAM system for closed die forging Process”, 2003. Vol 138, Int. Journal of Material Processing Technology, pp436-‐442.
Materials Processsing Technology
2000 Q3
IF=0.5
85 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”FE analysis of influence of unequal friction, metal filling and residual stresses in closed die forging processes”, Journal of Mechanics and Materials in Design, May 2000, p158.
Mechanics and Materials in Design
2012 Q3
IF=1.196 2000 scopus
86
A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”Coupled thermo-‐mechanical finite element analysis of high speed closed-‐die forging process”, Int. Journal of Mechanics and Materials in Design, May 2000, p201.
Mechanics and Materials in Design
2012 Q3
IF=1.196 2000 scopus
87 S. Sulaiman, A.M.S.Hamouda, S.Abedin, M.R.Osman, “Simulation of
metal Filling Progress During the Casting Process”, Int. Journal of Material Processing Technology 100 (2000) 224-‐229.
Materials Processsing Technology
2000 Q3
IF=0.5
88 S. Sulaiman, A.M.S. Hamouda, S. Abedin,” Development of Computer Aided Design System for Casting Process”, Int. Journal of Material Processing Technology, March 1999.
Materials Processsing Technology
1999 Q3
IF=0.5
89 Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Int. Journal of Materials Processing Technology, Vol 63 Jan 1997, pp.690-‐695.
Materials Processsing Technology
1997 Q3
IF=0.5
90 A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Journal of Materials Processing Tech. 1996. Vol PRO060/1-‐4, pp.723-‐727.
Materials Processsing Technology
1996 Q3
IF=0.5
91 S.B. Sulaiman, D.T. Gethin, “A Network Technique for metal flow analysis in the filling system of pressure diecasting and its experimental
Engineering Manufacture
1992 Q2
Page 33/80
verification on a cold chamber machine”, Proceedings of the Institution of Mechanical engineers Part B-‐ Journal of engineering manufacture. Vol 206 IMechE 1992, pp 261-‐275.
IF=0.5
b. Citation Index/Refereed Journals
Total = 146 papers After 2007 = 119 papers 2007 and below = 27 papers
No Article Journal Index
1 S. Sulaiman, J. Nemati, G.H. Majzoobi, M. Aljermi, “Experimental and
numerical study of high strain rate property of pure copper processed by ECAE method”, Int. Journal of Advances in Materials and Processing Technologies, Taylor & Francis, 2019, 5(3), pp386-‐393
Advances in Materials and Processing
Technologies
2019 Scopus
2 S.Sulaiman, M, Aljermi, M.I.S. Ismail and M.F.Fadzil, “Thermal-‐Induced Defect and Optimization of Casting Process”, International Journal of Mechanical Engineering and Robotics Research, November 2019, Vol. 8, No. 6, pp 900-‐904.
Mechanical Engineering and
Robotics Research
2019 Scopus
3 Nur Liyana, M.H., Azmah Hanim, M.A., Sulaiman, S., Saliza Azlina, O., “The effect of CNT and Cu on interfacial intermetallic growth of Sn-‐Ag-‐Cu solder”, Materials Science and Engineering, 2019. 469, 012007.
Materials Science and Engineering
2019 Scopus
4 R.E., Ibrahim, R.Rosmamuhamadani, M.K. Talari, Sabrina, M. Yahaya, S.Sulaiman and M.I.S Ismail , “Corrosion Behaviour of Al-‐Si Cast Alloy Reinforced with Titanium diboride (TiB2) and Scandium (Sc)”, Journal of Engineering and science Research 2(2): 01-‐018, 2018.
Engineering and science Research
2018 RMP
5 S.Sulaiman and Z.A. Zulkifli, “Effect of mould vibration on the mechanical properties of aluminium alloy castings”, Advanced Material Processing and Technology, 2018, Taylor & Francis, ISSN:2374-‐068X.
Advances in Materials and Processing
Technologies
2018 Scopus
6 R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari, “Wear characterization of nano-‐hydroxyapatite with addition of titanium (HA-‐Ti)”, Materials and Science Engiineering. 2018. 348 012001.
Materials and Science
Engiineering
2018 Scopus
7 A. Aldeehani, S.Sulaiman, F.A.Aziz, F. Mustapha, “Development of green supply chain management in food industry”, Industrial Engineering and Operation Management, 2018 .
Industrial Engineering and
Operation Management,
2018 Scopus
8 A.A. Khan, M.K.A.M.Ariffin, S.Sulaiman and F. Mustapha, “Factors influencing project selection for SMEs”, International Journal of Recent Technology and Engineering, 2018. 7(4), pp15-‐18
Recent Technology and Engineering
2018 Scopus
9 K.N.M.Tohit, N. Zulkifli, Shamsuddin Sulaiman and B.T. Hang Tuah Baharudin, ‘Identifying Inconel 718 fasteners failure using structured
Materials Science Engineering
2018 Scopus
Page 34/80
probem solving method”, Materials Science Engineering, 2018. 370 012017.
10 Q.M. Azpen, B.T.H.T.Baharudin, S. Shamsuddin and F. Musapha, “Reinforcement and hot workability of aluminium alloy 7075 particulate composites: a review”, Journal of Engineering Science and Technology 04/2018; 13(4): 1034-‐1057.
Engineering Science and Technology
2018 EBSCO
11 M.Y. Yuhazri, W.N. Hidayah, S.Sulaiman, H.Sihombing and A,M,Kamarul, “Kansei Engineering approach for Customer Preferences of Car Design”, Advances in Intelligent Systems and Computing, 2018. 739, pp. 289-‐295.
Advances in Intelligent Systems and Computing
2018 Scopus
12 M.A.Omar, B.H. Baharudin and S.Sulaiman, “ Stent Manufacruring using cobalt chromium molybdenum (coCrMo) by selective laser melting technology”, 2017. IOP 1885, 100017
IOP/AIP 2017 Scopus
13 M.A.Ishak, S.Sulaiman, B.T.H.T.Baharudin and Y. Syajaratunnur,”Research on the ship propeller blade to determine changes in the mechanical properties based on forces projection” , ARPN Journal of Engineering and Applied Sciences, Vol 12, No. 4, (2017). pp 1241-‐1247.
Engineering and Applied Sciences
2017 Scopus
14 S. Sulaiman, Z. Marjom, M.I.S.Ismail, M.K.A. Ariffin and N. Ashrafi, “Effect of Modifier on mechanical properties of Aluminium Silicon Carbide (Al-‐SiC) composites”, Elsevier, Procedia Engineering 184 (2017) pp 773-‐777.
Procedia Engineering
2017 Scopus
15 B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Development of an experimental rig for soil and crop residues management”, (2017) Acta Horticultiture. 1152, 87-‐94.
Acta Horticultiture 2017 EBSCO
16 S.Sulaiman, Z.Leman, B.T.H.T. Baharudin, M.K.A. Ariffin and Shamsuddin Man, “Process parameter for cylindrical deep drawring components”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, (2016) Vol 1. NOS. 3-‐4, 542-‐548.
Advances in Materials and Processing
Technologies
2016 Scopus
17 S.Sulaiman, “Material Application, Performace and Life Cycle”, Reference Module in Materials Science and Materials Engineering, Elsevier, (2015), doi:10.1016/B978-‐0-‐12-‐803581-‐8.04102-‐3. Pp1-‐2.
Materials Science and Materials Engineering
2015 Scopus
18 B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Design optimization parameters for tractor mounted mulcher blades”, Int. Journal of Applied Engineering Research, 10(23), (2015) pp 43461-‐43464.
Applied Engineering Research
2015 Scopus
19 S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan, “ Mechanical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC)”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, Vol 1, Issue 1-‐2, 2015, pp49-‐55.
Advances in Materials and Processing
Technologies
2015 Scopus
20 M.S. Al-‐Khaldi, M.K.A. Ariffin, S.Sulaiman, B.T.H. Baharudin and N.A. Aziz, “ Improvement in CAM shaft design: An Experimental application and recommendation”, Applied Mechanics and Materials , Vol. 780-‐790 (2015) pp 249-‐254.
Applied Mechanics and Materials
2015 Scopus
21 N.Fachurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharudin, “Analysis of a metal matrix composite automotive
Automotive and Mechanical
2015 Scopus
Page 35/80
component”, Int. Journal of Automotive and Mechanical Engineering, (2015), 11 (1), pp. 2531-‐2540.
Engineering
22 Hani Mizhir Magid, S.Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Modelling and Simulation of hollow Profile Aluminium Extruded Product”, Applied Mechanics and Materials Vol. 761 (2015) pp 17-‐21.
Applied Mechanics and Materials
2015 Scopus
23 Ahmad Aizuddin Abd Aziz, Shamsuddin Sulaiman, Aung Lwin Moe and and Aminudin Abu, “Investigation of Plastic Injection Moulding Process Optimization in Complex shape Product”, Applied Mechanics and Materials Vol. 695 (2015) pp 260-‐264.
Applied Mechanics and Materials
2015 Scopus
24 H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Enhancement and improvement of the mechanical properties of aluminium extruded products by mathematical analysis and simulation process”, AIP (2015), 1660, 070113.
AIP 2015 Scopus
25 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Applied Mechanics and Materials Vol. 529 (2014) pp 21-‐26.
Applied Mechanics and Materials
2014 Scopus
26 S.Sulaiman, S. Borazjani and A. Roshan, “Finite Element Analysis of Aluminium-‐Kevlar/Epoxy Pressure Vessel”, Applied Mechanics and Materials Vol. 529 (2014) pp 27-‐32.
Applied Mechanics and Materials
2014 Scopus
27 M.U.Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Integrated TRIZ-‐AHP Support System for Conceptual Design”, Applied Mechanics and Materials Vol. 548-‐549 (2014) pp 1998-‐2002.
Applied Mechanics and Materials
2014 Scopus
28 H. Md. Akhir, D. Ahmad, I.H. Rukunuddin, S.Sulaiman and A. Yahya, “Design and Development of a Sweet Potato Digging Device’. Pertanika Journal of science and technology, 22 (1)2014:43-‐53
Pertanika Journal of science and technology
2014 Scopus
29 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical simulation on moulded thin-‐walled parts via injection moulding process”, Applied Mechanics and Materials Vol. 575 (2014), pp 73-‐77.
Applied Mechanics and Materials
2014 Scopus
30 S.H.Tang, Shiva Sadat Moosavipur, S.Sulaiman, M.K.A.M.Ariffin and Morteza Ghobakhloo, “The impact of information technology investment on supply chain capabilities: A review”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp723-‐726. (Indexed by Scopus)
Applied Mechanics and Materials
2014 Scopus
31 Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-‐532.
Applied Mechanics and Materials
2014 Scopus
32 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S.Sulaiman and S.H.Tang, “Managing uncertainty in supply chain management of vessel chatering in Oil and Gas Industry”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp694-‐699.
Applied Mechanics and Materials
2014 Scopus
33 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Development of microstructure and fracture of Al-‐6063 alloy using equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp488-‐494.
Applied Mechanics and Materials
2014 Scopus
Page 36/80
34 Muhammad Yusuf, M.K.A.Ariffin, N. Ismail and S.Sulaiman, “Effect of
machining process on surface microhardness of Titanium carbide reinforced aluminium LM6 composite”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp495-‐500.
Applied Mechanics and Materials
2014 Scopus
35 Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-‐726.
Applied Mechanics and Materials
2014 Scopus
36 J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Microharness characteristics of Al-‐6063 alloy processed by equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014) pp513-‐518.
Applied Mechanics and Materials
2014 Scopus
37 B.T.H.T.Baharudin, K.P.Ng, S.Sulaiman, R.Samin and M.S.Ismail, “Temperature distribution of micro milling process due to uncut chip thickness”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp 214-‐221.
Applied Mechanics and Materials
2014 Scopus
38 Mona Kiaee, Shamsuddin Sulaiman and Tang Sai Hong, “Investigation on microstructure and Mechanical Properties of Squeeze Cast Al-‐Si Alloys by Numerical Simulation”, Advanced Materials Research Vol. 1043 (2014) pp 31-‐35.
Advanced Materials Research
2014 Scopus
39 J.Nemati, S.Sulaiman, G.H.Majzoobi and B.T.H.T. Baharudin, “Finite Element Study of Deformation Behaviour of Al-‐6063 Alloy Developed by Equal Channel Angular Extrusion”, Advanced Materials Research Vol. 1043 (2014) pp 119-‐123.
Advanced Materials Research
2014 Scopus
40 M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-‐487. (Indexed by Scopus)
Applied Mechanics and Materials
2014 Scopus
41 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-‐500.
Applied Mechanics and Materials
2014 Scopus
42 Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 145-‐150.
Applied Mechanics and Materials
2014 Scopus
43 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-‐699.
Applied Mechanics and Materials
2014 Scopus
44 Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods,
Advanced Materials Research
2014 Scopus
Page 37/80
Advanced Materials Research Vols. 912-‐914 (2014) pp 1932-‐1939.
45 S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-‐200.
Advanced Materials Research
2014 Scopus
46 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 151-‐156.
Applied Mechanics and Materials
2014 Scopus
47 S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Advanced Meterials Research, Vol. 903 (2014) pp 21-‐26.
Advanced Materials Research
2014 Scopus
48 S.Sulaiman, A. Roshan and S. Borazjani, “Finite Element of Aluminiu-‐Kevlar/Epoxy Pressure Vessel”, Advanced Meterials Research, Vol. 903 (2014) pp 27-‐32.
Advanced Materials Research
2014 Scopus
49 Suraya Sulaiman, Shamsuddin Sulaiman, Miunira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Advanced Materials Research Vol. 903 (2014) pp 145-‐150.
Advanced Materials Research
2014 Scopus
50 Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Advanced Materials Research Vol. 903 (2014) pp 151-‐156.
Advanced Materials Research
2014 Scopus
51 S.Sulaiman, J. Nemati, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Experimental Study of impact strength of Al-‐6063 alloy Processed by equal channel angular extrusion”, Advanced Materials Research Vol. 911 (2014) pp 158-‐162.
Advanced Materials Research
2014 Scopus
52 B.T.H.T. Baharudin, K.P.Ng, S.Sulaiman, R. Samin and M.S.Ismail, “ Temperature distribution of micro milling process due to uncut chop thickness”, Advanced Meterials Research, Vol. 939 (2014) pp 214-‐221.
Advanced Materials Research
2014 Scopus
53 Uzair Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Problems evaluation for TRIZ methods using AHP: Case study on car’s dashboard improvement design concepts”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp89-‐93.
Applied Mechanics and Materials
2014 Scopus
54 C.N.A.Jaafar, I.Zainol, S.Sulaiman and M.I.Ayub, “ Effects of PVA-‐PEG binder system on microstructure and properties of sintered Alumina”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp355-‐360. (Indexed by Scopus)
Applied Mechanics and Materials
2014 Scopus
55 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of feeding angles and cutting speeds of a mower blade with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013), pp260-‐264.
Advanced Materials Research
2013 Scopus
56 S. Sulaiman, S. Emamian, M. N. Sheikholeslam, and M. Mehrpouya, "Review of the Effects of Friction Stir Welding Speed on Stainless Steel
Materials, Mechanics and
2013 EBSCO
Page 38/80
Type 304L," International Journal of Materials, Mechanics and Manufacturing vol. 1, no. 1, pp. 85-‐87, 2013.
Manufacturing
57 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Pulverization of sweet potato vine at different mover speeds”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012022.
Materials Science and Engineering
2013 Scopus
58 S.Sulaiman, A.Roshan and S.Borazjani, “Finite element modeling and simulation of machining of Titanium alloy and H13 Tool Steel using PCBN Tool”, Applied Mechanics and Materials, Vols. 392 (2013) pp 36-‐40.
Applied Mechanics and Materials
2013 Scopus
59 S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on cutting temperature of TiAl6V4 Alloy”, Applied Mechanics and Materials, Vols. 392 (2013) pp 68-‐72.
Applied Mechanics and Materials
2013 Scopus
60 S.Sulaiman, S.Borazjani, A.Roshan and S. Heydaryan, “Failure analysis of aluminium reinforced composite vessel”, Applied Mechanics and Materials, Vols. 392 (2013) pp 178-‐182.
Applied Mechanics and Materials
2013 Scopus
61 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of feeding angles and cutting speeds of a mover knife with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013) pp 260-‐264.
Advanced Materials Research
2013 Scopus
62 Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of knife shapes and cutting speeds of a mover on the percentage pulverization of sweet potato vine”, Applied Mechanics and Materials, Vols. 421 (2013) pp29-‐33.
Applied Mechanics and Materials
2013 Scopus
63 R.S.Taufik and S.Sulaiman, “Thermal expansion model for cast aluminium Silicone carbide”, Procedia Engineering 68 (2013) pp. 392-‐398.
Procedia Engineering
2013 Scopus
64 Jamshid Nemati, S.Sulaiman, Gholam Hossein Majzoobi, B.T.H.T.Baharudin and Azma Hanim Mohamed Ariff, “Effect of equal channel angular extrusion on fatique life of pure Copper”, Advanced Materials Research Vol. 685 (2013) pp 97-‐101.
Advanced Materials Research
2013 Scopus
65 S.Sulaiman, S.Borazjani and S.H.Tang, “Finite element analysis of filament-‐wound composite pressure vessel under internal pressure”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012061.
Materials Science and Engineering
2013 Scopus
66 S.Sulaiman and N.A. Ismail, “Analysis of failure in manufacturing machinery”, IOP Conf. Series: Materials Science and Engineering 50 (1) (2013) 012057.
Materials Science and Engineering
2013 Scopus
67 D.Ahmad, O.Jamarei, S.Sulaiman, A.B. Fashina and F.B.Akande, “Modelling of motion resistance ratios of pneumatic and rigid bicycle wheel”, Pertanika Journal of Science & Technology, Vol.21(1) Jan 2013, pp. 59-‐74.
Pertanika Journal of science and technology
2013 Scopus
69 A.Abdullah, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin and T.R.Vijayaram, “Green compression strength of tin mine tailing sand for green sand casting mold”, (2013) Pertanika Journal of Science and Technology 21 (2) pp.335-‐342.
Pertanika Journal of science and technology
2013 Scopus
Page 39/80
69 Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-‐Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-‐1284, 2013.
Applied Mechanics and Materials
2013 Scopus
70 S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-‐377, 2013.
Advanced Materials Research
2013 Scopus
71 Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin, “Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-‐108, 2013 .
Advanced Materials Research
2013 Scopus
72 N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-‐86, 2013.
Advanced Materials Research
2013 Scopus
73 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-‐TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-‐3167, 2013.
Engineering and Technology
2013 Scopus
74 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-‐35, 2013.
Materials, Mechanics and Manufacturing,
2013 EBSCO
75 S. Sulaiman, , Umar Ali Umar, S.H. Tang, N. Fatchurrohman, Application of Radio Frequency Identification (RFID) in Manufacturing in Malaysia, Procedia Engineering, Vol. 50(2012), pp. 697-‐706.
Procedia Engineering
2012 Scopus
76 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012).
Emerging Technology and
Advanced Engineering
2012 EBSCO
77 N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “ Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology 7(2) 2012, pp248-‐256.
Engineering Science and Technology
2012 Scopus
78 Seyedehfarzaneh Nojabaei, Z. Leman, S.H. Tang and S.Sulaiman, “Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing System”, American Journal of Applied Science 9 (9), 2012, pp1435-‐1442.
Applied Science 2012 Scopus
79 Shahla Seifi, Norzima Zulkifli, Rosnah Yusuff and Shamsuddin Sulaiman, “Information requirements for sustainable consumption”, Social Responsibility Journal, Emerald, Vol. 8 Iss:3 (2012). pp.433-‐411.
Social Responsibility 2012 EBSCO
80 Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix
Advanced Materials Research
2012 Scopus
Page 40/80
Composite”, Advanced Material Research, 445, 475-‐480, 2012.
81 N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new concurrent engineering -‐ multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-‐298, 2012.
Applied Mechanics and Materials
2012 Scopus
82 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-‐119, pp 1561-‐1565, 2012.
Applied Mechanics and Materials
2012 Scopus
83 Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin, “Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 -‐ 1471, 2012.
Physical Sciences 2012 EBSCO
84 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of Emerging Technology and Advanced Engineering (2012).
Emerging Technology and
Advanced Engineering
2012 EBSCO
85 M. Nikbakht, N.Zulkifli, N.Ismail, S.Sulaiman, A.Sadrnia and M.Suleiman, “Multi-‐echelon supply chain design in natural gas Industry”, World Applied Science Journal, 20(1), 2012, pp. 54-‐63.
Applied Science 2012 Scopus
86 S.Sulaiman, M.K.A.M.Ariffin and S.Y.Lai, “Springback behaviour in sheet metal forming for automotive door”, AASRI Procedia 3 (2012) pp.224-‐229.
AASRI Procedia 2012 Scopus
87 S.H.Tang, N.Hakim, W.Khaksar, S.Sulaiman, M.K.A.Ariffin and R.Samin, “Artificial Neural Network (ANN) approach for predicting friction coefficient of roller Burnishing AL6061”, Int. Journal of Machine Learning and Computing, Vol. 2, No. 6, December 2012, pp. 825-‐830.
Machine Learning and Computing
2012 EBSCO
88 T.R.Vijayaram, A.Abdullah and S.Sulaiman, “Determination of green compression strength and permeability of tailing sand for metal casting Industries gathered from ex tin mines in Perak State Malaysia”, Indian Foundry Journal, Vol 58, No.10, October 2012, pp.29-‐33.
Indian Foundry 2012 IFS
89 A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-‐864, 2012.
Advanced Materials Research
2012 Scopus
90 S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-‐3890. 2011 .
Procedia Engineering
2011 Scopus
91 S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-‐3895. 2011 .
Procedia Engineering
2011 Scopus
Page 41/80
92 D.Ahmad, S.Shamsuddin, A.B.Fashina and F.B.Akande, “Development of a tractor-‐pulled motion resistance test rig for traction studies on towed narrow wheels”, Int. J Agric & Biol Eng, Vol.4 No. 4 (Dec 2011) pp21-‐27.
Agric & Biol Eng 2011 EBSCO
93 Mohammad Shuaibu Abubakar, Desa Ahamd, Othman Jamarei, Sulaiman Samsuddin and Misron Norhisham, “Evaluation of a dual-‐purpose chemical applicator for paddy field”, American Journal of Applied Sciences 8 (4):362-‐367, 2011.
Applied Sciences 2011 EBSCO
94 Akande, F.B., Ahmad, D., Shamsuddin, S., Jamarei, O.B. and Fashina, A.B. Mathematical modelling of the motion resistance ratio of the pneumatic and rigid bicycle wheels on deformable surfaces. Pertanika Journal of Science and Technology, 2011.
Pertanika Journal of science and technology
2011 Scopus
95 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Development of a dual-‐purpose chemical applicator for paddy fields”, African Journal of Agricultural Research 2011.
Agricultural Research
2011 Scopus
96 Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahamd and Gholam Hossein Majzoobi, “An approach to determine effect of crane hook on payload sway”, Int. Journal of Mechanics and Applications 2011: 1(1):30-‐38.
Mechanics and Applications
2011 EBSCO
97 Taufik, S.Sulaiman, T.A.Abdullah adn Sivarao, “Design and Simulation on Compressor Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-‐265 (2011) pp 403-‐408.
Advanced Materials Research
2011 Scopus
98 T.R. Sahroni, S. Sulaiman, I. Romli, M.R. Salleh and H.A. Ariff, “Nonlinear Thermal Expansion Model for SiC/Al”, World Academy of Science, Engineering and Technology 78 2011.
World Academy of Science,
Engineering and Technology
2011 Scopus
99 Taufik, S.Sulaiman, T.A.Abdullah and Sivarao, “Design and Simulation on Cast Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-‐265 (2011) pp 323-‐328.
Advanced Materials Research
2011 Scopus
100 F.B. Akande, D. Ahamad, S. Sulaiman, O. Jamarei and A.B. Fashina, “ Present state of research on narrow wheels: A prerequisite for traction studies on non-‐lug narrow wheels”, Leonardo Electronic Journal of Practices and Technologies, Vol 10, Issue 18, January 2011, pp 65-‐78.
Electronic Journal of Practices and Technologies
2011 EBSCO
101 Gholam Reza Esmaeilian, Shamsuddin Sulaiman, Napsiah Ismail, Maryam Hamedi, Megat Mohammad Hamdan Megat Ahmad, “ A tabu search approach for mixed-‐model parallel assembly line balancing problem (type II), Int. Journal of Industrial and Systems Engineering 2011 – Vol 8, No.4 pp407-‐431.
Industrial and Systems
Engineering
2011 EBSCO
102 A. A. Faieza, S. Sulaiman and M.Y. Rosnah,“Product Structure Initialization, the Bottleneck of ERP Implementation in Customer Driven Environments: A Case Study”, Pertanika J. Sci. & Technol. 19 (1): 66 – 82 (2011).
Pertanika Journal of science and technology
2011 Scopus
103 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Mechanical properties of paddy soil in relation to high clearance vehicle mobility”, Australian Journal of Basic and Applied Sciences, 4(5): 2010, pp906-‐913.
Australian Journal of Basic and
Applied Sciences
2010 Scopus
104 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, Review of Mech. 2010
Page 42/80
“Computer-‐Aided FEM to Analyze the Composite Materials for Replacing with Steel in Crane Structure”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.3, March 2010, pp233-‐237.
Engineering (IREME),
Scopus
105 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin, A.A. Faieza and S.M. Sapuan, “Coating Performance in High Speed Micro Machining of H13, Tool Steel”, Advanced Materials Research Vols. 83-‐86 pp 985-‐992, 2010.
Advanced Materials Research
2010 Scopus
106 N. Fatchurrohman and S. Sulaiman , “ The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by vortex mixing – sand casting technique”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.1, January 2010, pp12-‐17.
Review of Mech. Engineering (IREME)
2010 Scopus
107 N. Fatchurrohman and S. Sulaiman, “Production and solidification analysis of Titanium carbide particulates reinforced aluminium alloy matrix composite by vortex mixing – sand casting technique”, ICASTOR Journal of Engineering Vol. 3, No. 1 (2010) ,pp 13-‐20.
ICASTOR Journal of Engineering
2010 EBSCO
108 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Present State on Research on Development of a High Clearance vehicle for Paddy Fields”, Research Journal of Agriculture and Biological Sciences, 5(4): 2009, pp489-‐497.
Agriculture and Biological Sciences
2009 EBSCO
109 G.R.Esmaeilian, N.Ismail , S.Sulaiman, , M.M.H.MegatAhmad, & M.Hamedi, “Allocating and balancing of mixed model production through the parallel assembly lines”, 2009, European Journal of Scientific Research 31 (4), pp 616-‐631.
European Journal of Scientific Research
2009 Scopus
110 G.R.Esmaeilian, S.Sulaiman, N.Ismail, M.M.H.MegatAhmad, & M.Hamedi. “Application of MATLAB to Create Initial Solution for Tabu Search in Parallel Assembly Lines Balancing”. Int. Journal of Computer Science and Network Security, 8(10), 132-‐136.
Computer Science and Network
Security
2009 EBSCO
111 Faieza Abdul Aziz, D.T.Pham, Shamsuddin Sulaiman, Napsiah Ismail, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Visual feedback and pseudo-‐haptic feedback improve manual lifting performance”, Journal Teknologi, 49(D) Dec 2008: 157-‐171.
Teknologi 2008 EBSCO
112 Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-‐475.
World Journal of Engineering
2008 EBSCO
113 Napsiah Ismail, S.Sulaiman, Sai Hong Tang and M.R.Vasili, “A statistical travel time model for miniload automated storage and retrieval systems with open-‐rack structure”, In. J. IC-‐AI 2008: 715-‐721.
Artificial Intelligent 2008 Scopus
114 A.A. Faieza, S. Sulaiman, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Virtual training enhances user performance”, ARCS 2008: 189-‐195.
Automation, Robotics And
Control Systems
2008 Scopus
115 M. Jolgaf, S.B. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Closed Die Forging Geometrical Parameters Optimization for Al-‐MMC”, American
Engineering and Applied Sciences
2008 EBSCO,
Page 43/80
J. of Engineering and Applied Sciences, Vol1, pg 1-‐6, 2008
WAD, ASA, DOAJ
116 M Jolgaf, SB Sulaiman, MKA Ariffin, AA Faieza, “Billet shape
optimization for minimum forging load”, European Journal of Scientific Research 24 (3), 420-‐427, impact factor 0.736, 2008.
European Journal of Scientific Research
2008 Scopus
117 Faieza, A.A., Sulaiman, S., N. Ismail, Ariffin, M.K.A, B.T.H.T. Baharuddin, “Visual Feedback and Pseudo-‐Haptic Feedback Improve Manual Lifting Performance” , Jurnal Teknologi, volume 49, pg10.
Teknologi 2008 Scopus
118 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, World Journal of Engineering 2008, 5(3): 474-‐475.
World Journal of Engineering
2008 EBSCO
119 G.R.Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, Int. Journal of IEEE 2008, pp1458-‐1466.
IEEE 2008 Scopus
120 S.M.Sapuan, S.S.S.Imihezri, S.Sulaiman, M.Hamdan and E.S.Zainudin, “Comparison of simulated and actual product of polymer composite automotive clutch pedal”, Int. Journal of Mechanical and Materials Engineering (IJMME), Vol 2 (2007) No 1, pp29-‐39.
Mechanical and Materials
Engineering
2007 Scopus
121 A.M.S.Hamouda, S.Sulaiman, T.R.Vijayaram, M.Sayuti and M.H.M.Ahmad, “Procssing and characterisation of particulate reinforced aluminium silicon matrix composite”, Int Journal of Achievements in Materials and Manufacturing Engineering, Vol 25 Issue 2 December 2007, pp. 11-‐16.
Achievements in Materials and Manufacturing Engineering
2007 EBSCO
122 K.N.M.Tohit, S.Sulaiman, N.Ismail, M.Y.Ismail and S.M.Sapuan, “Improvement of accuracy level using process failure mode and effect analysis and control plan techniques for automotive fender shield assembly”, Journal of Scientific and Industrial Research Vol. 66. October 2007, pp. 811-‐818.
Scientific and Industrial Research
2007 Scopus
123 Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman, Megat Mohamad Hamdan Megat Ahmad and Abdel Magid Salem Hamouda, “Processing, Properties and Metallographic Studies of Combined Tungsten Carbide and Alluminium Silicate Particulates Reinforced Aluminium-‐11.8% Silicon Alloy Matrix Hybrid Composite Castings”, Indian Foundry Journal, Vol. 53 No. 2 February 2007, pp33-‐41.
Indian Foundry 2007 IFS
124 C.F.Tan, N. Ismail, S.V.Wong, S.Sulaiman and M.R.Osman, “Development of hole recognition system from step file”, Asian Journal of Science and Technology for Development AJSTD Vol. 22 Issue 3, 2005, pp. 285-‐295.
Science and Technology for Development
2005 EBSCO
125 H.B. Lee, S.M.Sapuan, S.Sulaiman and M.H.M.Ahmad, “Design process and rapid prototyping of fibre reinforced composite pedal box”, Int. Journal of Sudan Engineering Society, August 2005, Vol 51 no 44, pp23-‐32.
Sudan Engineering Society
2005 EBSCO
126 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman, M.M.H.M.Ahmad, M.R.Osman and E.S.Zainudin, ‘A simulation work to study the effect of increasing number of gates on air traps and weld line formation in injection moulded composite clutch pedal’, Journal of Applied Technology, vol.2 No. 2 October 2004 , pp 105-‐109.
Applied Technology 2004 EBSCO
Page 44/80
127 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “Design of
Composite Clutch Pedal”, Int. Journal Sudan Engineering Society, Issue 42 Vol 50, July 2004, pp15-‐23.
Sudan Engineering Society
2004 EBSCO
128 S.H.Tang, S.L.Wong, S.Sulaiman, P.Young and M.S.J. Hashmi, “Computer-‐Aided Design in Subtractive and Additive Prototyping”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp127-‐137.
Pertanika Journal of science and technology
2004 Scopus
129 C.F. Tan, N.Ismail, M.R.Osman, S.V Wong and S.Sulaiman,” The Development of Hole Recognition System for Machined parts”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp1-‐8.
Pertanika Journal of science and technology
2004 Scopus
130 M.Y.Rosnah, M.M.H.Megat Ahmad, S.Sulaiman and Z.Mohamad, “Implementation of Computer-‐Based Technologies for the Small and Medium Scale Industries of Malaysia”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp41-‐50.
Pertanika Journal of science and technology
2004 Scopus
131 E.S. Zainudin, S.M. Sapuan, S. Sulaiman and M.M.H.M. Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites, Ciencia & Tecnologia dos Materiais, 16, no. 4, pp. 57-‐60, 2004. (IF=0.115)
Ciencia & Tecnologia dos
Materiais
2004 EBSCO
132 Tang Sai Hong, Wong Su Luan, Paul Young, Shamsuddin Sulaiman and M.S.J.Hashmi, “Hardware design and interfacing of a robot assisted subtractive prototyping system”, Journal Teknologi, 40(A)Jun 2004: 33-‐50.
Teknologi 2004 EBSCO
133 E.S.Zainudin, S.M.Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “To explore and confirm the validated experimental results in short fibre reinforced injection moulded polycarbonate composite disc using MPI technique”, Int. Journal of Industrial Technology Vol13 No.2,2004, pp57-‐63.
Industrial Technology
2004 EBSCO
134 C.T. Wong, S.Sulaiman, N. Ismail and A.M.S Hamouda, “Design and Simulation of Plastic Injection Moulding Process”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp85-‐99.
Pertanika Journal of science and technology
2004 Scopus
135 Ishak Aris, A.K.M. Parves Iqbal, A.R.Ramli and S.Shamsuddin, “Design and Development of a programmable painting robot for houses and buildings”, Journal Teknologi, UTM, No. 42(A), Jun 2005, pp27-‐48.
Teknologi 2004 EBSCO
136 N.Ismail, M.R.Osman,C.F.Tan, S.V.Wong and S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Int. Journal of Engineering and Technology, Vol. 1, no. 2, 2004, pp.206-‐212.
Engineering and Technology
2004 EBSCO
137 Shamsuddin Sulaiman and Lim Ying Pio, “Validation of MAGMAsoft simulation of sand casting process”, Int. Jounal of IEM, Vol. 65 No.1/2, September/December 2004, pp29-‐38.
IEM 2004 EBSCO
138 Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail and A.M.S. Hamouda, “Design and Simulation of Plastic Injection Moulding Process, Int. Journal of Plastic Molding Technology 2003, pp.16-‐20.
Plastic Molding Technology
2003 EBSCO
139 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman and S.I.S.Shahruddin, “A development and comparative study of two rapid
Ciencia & Technologia dos
2003 EBSCO
Page 45/80
prototyping processes of an automotive pedal box system”, Int. Journal of Ciencia & Technologia dos Materials, 15, no. 1-‐2, 2003, pp 5-‐8.
Materials
140 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “A numerical investigation of fibre orientation in injection moulded thermoplastic composites” Advances in Material Processing Journal, Institute of Materials Malaysia, ISBN983-‐2781-‐00-‐0, 2003, pp 1-‐33.
Advances in Material Processing
2003 EBSCO
141 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad “Fiber Orientation of Short Fiber Reinforced Injection Molded Thermoplastic Composites: A Review”, Int. Journal of Plastic Molding Technology, March 2002, Vol 6, No. 1. Pp.1-‐10.
Plastic Molding Technology
2002 Scopus
142 S.B.Sulaiman, D.T.Gethin, “Modelling and experimental investigation of heating and shaking subsystem for an oil analysis facility”, Asean Journal of Science and Technology for Development 14(2)(1997) pp 11-‐26.
Science and Technology for Development
1997 EBSCO
143 Shamsuddin Sulaiman, D.T. Gethin, “A Network Technique For Analysis Of Thermal Transient Casting Process”, Pertanika Journal of Science & Technology Vol.4 No.2 1996 pp.251-‐261.
Pertanika Journal of science and technology
1996 Pertanika
144 Shamsuddin Sulaiman, D.T.Gethin, “An experimental investigation into the metal filling system of pressure diecasting process”, Journal of Institution of Engineers Malaysia (IEM) March 1996 pp.9-‐13.
IEM 1996 IEM
145 Shamsuddin Sulaiman, D.T. Gethin, “Expert System for the Casting Process Selection and Analysis Procedure”, Institution of Engineers Malaysia (IEM) Bulletin April 1995 pp.11-‐18.
IEM 1995 IEM
146 Shamsuddin Sulaiman, “Casting Thermal Simulation”, Journal Institution of Engineers Malaysia (IEM) June 1994 (54), pp5-‐16.
IEM 1992 IEM
Conference Proceedings
1. S.Sulaiman, A.Aldeehani, M.Alhajji and W.N.W.Ishak, “Optimization of cutting parameters
effecting surface roughness of Al6061 Dry milling machining”, Euro-‐Mediterranean Conference for Environmental Integration, 10-‐13 Oct 2019, Sousse Tunisia.
2. S.Sulaiman and T.Zuhair, “Effect of composite material distribution and shape optimization on energy absorption system”, AMPT 2018, Dublin, Ireland
3. R. Rosmamuhamadani, S.Sulaiman, M.A. Azmah Hanim, MIS. Ismail and M.K.Talari , “Wear Characterization Of Nano-‐Hydroxyapatite With Addition Of Titanium (HA-‐Ti)” , ICMEA Bali, 14-‐16 Jan 2018.
4. A. Aldeehani, S.Sulaiman, F.A.Aziz and F. Mustapha. Development of Green Supply Chain Managementin Food Industry, Proceeding of the Internaltional Conference on Indusrial Engineering and Operation Management, Volume 2018-‐March, 2018, pp 2489-‐2494.
Page 46/80
5. S.Sulaiman, A.Aldeehani, F.A.Aziz and F. Mustapha (2018). Integrated Halal Supply Chain in Food Manufacturing Industry. 4th Int. Conference on Electrical, Mechanical and Industrial Engineering 2018, 9-‐11 March 2018 Bandung, Indonesia.
6. H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin , “Improvement the Mechanical Properties of Aluminum Alloys and Composite Extruded Parts”, AMPT 2017, Chennei India
7. A.Aldeehani, S.Sulaiman, A.Aziz and F. Mustapha (2017). Development of Supply Chain Management in Food Industries in Malaysia. Presented in World Congress on Engineering, Science and Technology, 31-‐01 January 2017, Phuket, Thailand.
8. A.Aldeehani, S.Sulaiman, F.A.Aziz and F. Mustapha. Development of Green Supply Chain Managementin Food Industry, Presented in 8th Internaltional Conference on Indusrial Engineering and Operation Management (IEOM), Bandung, Indonesia, March 6-‐8, 2018
9. M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “The optimization on residual Stress analysis for moulded thin-‐walled parts fabraicatied by wood-‐filled polypropylene compostes via plastic injection moulding”, The postgraduateSymposium on Composgte Science and Technology 2014, Putrajaya, pp. 94-‐106.
10. J. Nemati, S.Sulaiman, G.H. Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Effect of Equal Channel Angular Extrusion on fatigue life of pure copper. Paper presented at The 3rd International Conference on Advanced Materials Research(ICAMR 2013), Dubai, UAE.
11. N. Kakahy, D.Ahmad, MD. Akhir, S.Sulaiman and IShak.A. “Pulverizationof sweet potato vine at different mower speed”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
12. J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Development of Microstructure and Fracture Toughness of AL-‐6063 alloy Using Equal Channel Angular Extrusion Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
13. J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, G.H.Majzoobi, & M.A.Azmah Hanim. (2014). Finite Element Study of Deformation Behaviour of Al-‐ 6063 Alloy Developed by Equal Channel Angular Extrusion. Paper presented at the International conference on engineering and innovate materials (ICEIM), 2014Kuala Lumpur, Malaysia.
14. S.Sulaiman, J. Nemati, B.T.H.T. Baharudin, G.H.Majzoobi,&Hanim, M. A. A. Experimental study of impact strength of Al-‐6063 alloy processed by Equal Channel Angular Extrusion (ECAE) Paper presented at the International Conference on Key Engineering Materials (ICKEM 2014), Bali, Indonesia.
15. J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, M.A.Azmah Hanim,&G.H.Majzoobi. (2013). Microhardness characteristics of Al-‐6063 alloy processed by Equal Channel Angular Extrusion. Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
16. S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on Tool-‐Chip interface temperature in an orthogonal turning process”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
17. S.Sulaiman and N. Abidin Ismail, “Analysis of failure in manufacturing machinery”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
18. S.Sulaiman, A.Roshan and M.K.A. Ariffin, “Finite Element modelling of the effect of tool rake angle on tool temperature and cutting force during high speed machining of AISI4340 Steel”,
Page 47/80
Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
19. S.Sulaiman, S. Borazjani and S.H.Tang, “ Finit e Element anslysis of filament-‐wound composite pressure vessel under internal stress”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
20. Suraya Sulaiman, Shamsuddin Sulaiman, Najmiah Jaafar and Imrah Yusuff, “Studies of tensile propertiesof Titanium Carbide (TiC) Particulate composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang 1-‐3 July 2013.
21. N. Fathurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharuddin, “New technique for comceptual selection of manufacturing process and material, case study: metal matrix composite component”, Int. Conference of Quality in Research (QIR 2013), Yogyakarta 25-‐28 July 2013.
22. Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Aziz, “The effect of TiC particulates on the microstructure and mechanical properties of Aluminium based metal matrix composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-‐3 July 2013.
23. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite”, AMPT2012, 23-‐26 Sept. Wollongong, Australia.
24. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Chip formation and surface roughness in dry machining of aluminium alloys”, Int. Conference on Mechatronic and applied Mechanics 2011, Guangzhou, 27-‐28th Dec.
25. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Optimization of cutting parameters on turning process based on surface roughness using response surface methodology”, Int. Conf. on Applied Mechanics 2011, Shenzhen, China 18-‐10th November.
26. Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-‐TiC Particulate Reinforced Composites.” Paper presented at the International Conference on advanced design and Manufacturing Engineering (ICADME), September 16-‐18, 2011, Guangzhou, China.
27. M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Influence of cutting parameter on surgace roughness for wet and dry turning process”, Int. Conf. on Composite Science and Tech 2011, Kuala Lmpur, Malaysia, 22-‐24th March.
28. M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, ”Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Int. Conf. on AMPT2011, 13-‐16 July 2011, Istanbul Turkey.
29. Sayuti, M, Sulaiman, S, B.T.H.T. Baharudin, Arifin, M.K.A, Vijayaram, T.R and Suraya, S.. Effect of Quartz-‐Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy cast Composites. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.
30. Sayuti, M, Sulaiman,S, B.T.H.T. Baharudin, Arifin, M.K.A, Suraya, S and Gholamreza Esmaeilian. “Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.
Page 48/80
31. Suraya. S, Sulaiman. S , Ariffin. M.K.A and Sayuti.M. “Computer Simulation and Experimental
Investigation of Solidification Casting Process”. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-‐24, 2011.
32. Sayuti, M., Sulaiman, S., Baharudin, B. T. H. T., Ariffin, M. K. A. M., Vijayaram, T. R., & Suraya, S. (2011). “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”. Paper presented at International Conference on Mechanical Materials and Manufacturing Engineering (ICMMME 2011) in June 20-‐22, 2011, Nanchang, China.
33. Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “Manufacturing of TiC Particulate Reinforced Al-‐11.8%Si Matrix Composites by Mechanical Vibration Mould”. Paper Accepted for presented at the 2nd International Symposium on Mechanical Science and Technology (ISMST 2011), December 20-‐21, 2011, Guangzhou, China.
34. A.Hashemi, D.Ahmad, J.Othman and S.Sulaiman, “Design, development and performance of a disk plow combined with rotary blades”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-‐7 Dec 2011, Kuantan, Pahang Malaysia, pp11-‐18.
35. Amer N.N.Kakahy, D.Ahmad, MD Akhir and S.Shamsuddin “Design, development and performance of an integrated slasher for sweet potato harvester: A review”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-‐7 Dec 2011, Kuantan, Pahang Malaysia, pp37-‐43.
36. Akande, F.B., Ahmad, D., Jamarei, O.B., Shamsuddin, S. and Fashina, A.B. “Investigative Studies on the effects of tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard and Deformable Surfaces.” 11th International Congress on Mechanization and Energy in Agriculture Namil Kemal University, Turkey. 2011.
37. M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, “Mechanical properties of particulate reinforced Alulminium alloy matrix composite”, Int. Conf. on AMPT 2010, Paris 22-‐24 Oct 2010.
38. Sayuti, M., Suraya, S., Sulaiman, S., M.K.H, Ariffin., and Baharudin, B. T. H. “Processing and Characterisation of Particulate Reinforced Aluminium-‐11,8% Silicon Matrix Composite”. Paper presented at Aceh Development International Conference (ADIC2010), Kuala Lumpur, March 26 to 28, 2010.
39. Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. “Thermal Investigation of Aluminium -‐ 11.8% Silicon (LM6) Reinforced SiO2-‐Particles”. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-‐29 October 2009.
40. N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Aluminium alloy reinforced with titanium carbide particules fabricated by sand casting method”, WEC 2010, 2-‐5 August 2010, Kuching Sarawak.
41. N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Latent heat and solid fraction aspects”, WEC 2010, 2-‐5 August 2010, Kuching Sarawak.
42.
Sayuti. M, S. Sulaiman, Vijayaram T. R., B.T.H.T Baharudin, Ariffin M.K.A and Suraya S., “Manufacturing and mechanical properties of titanium carbide particulate reinforced aluminium – 11.8% silicon alloy matrix composite castings”, WEC2010, 2-‐5 August 2010,
Page 49/80
Kuching Sarawak.
43. Suraya S, M. Sayuti M, Sulaiman S, and Ariffin. M.K.A. “Tensile properties of titanium carbide particulates composites” , ENCON 2010 14-‐15 April 2010, Kuching Serawak.
44. Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. “Thermal Investigation of Aluminium -‐ 11.8% Silicon (LM6) Reinforced SiO2-‐Particles”. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-‐29 October 2009.
45. Sayuti, M., Sulaiman, S., Vijayaram, T. R., Baharudin, B. T. H. T., Ariffin, M. K. H., and Suraya, S. “Manufacturing and Mechanical Properties of Titanium Carbide Particulate Reinforced Aluminium-‐11.8% Silicon Alloy Matrix Composite Castings”. Paper presented at the World engineering Congress 2010, 2010, Kuching, Sarawak Malaysia, 2-‐5 August 2010.
46. Suraya, S., Sulaiman, S., Sayuti, M., Ariffin, M. K. H., and Baharudin, B. T. H. T. The Effect of TiC Microstructure and Tensile Properties of Aluminium-‐11.8% Silicon Alloy. Paper presented at the World Engineering Congress 2010, Kucing, Sarawak, 2-‐5 August 2010.
47. M.S.Abubakar, D.Ahmad, S.Shamsuddin and M.Norhisham, “Conceptual design of a remote-‐controlled chemical applicator for flooded paddy fields”, Int. Conf on Sustainable Mobility (ICSM) 2010, 1-‐3 December, Kuala Lumpur.
48. M.S.Abubakar, D.Ahmad, O.Jamarei, S.Samsuddin and M.Norhisham,”Evaluation of a dual-‐purpose chemical applicator for paddy fields”, Int. Conference on Mechatronics (ICOM) 2011, 17-‐19 May, 2011 Kuala Lumpur.
49. Akande, F.B., Ahmad, D., Jamarei, O.B, S. Shamsuddin, S., and Fashina, A.B. (2009). Development of a rolling resistance test rig. Poster presented at the National Conference on Agriculture and food Mechanisation, Renaissance Hotel Melaka, Malaysia. 23-‐25 June, 2009. Pp 109-‐112.
50. A.Azhar and S.Shamsuddin, “Preliminary study on tailing sand from ex-‐tin mine sites in Peninsular Malaysia for use as foundry sand: grain size distribution and average grain size”, Int. Conf. On AMPT 2009, Kuala Lumpur, 26-‐29th October 2009.
51. M.Sayuti, Suraya S, S. Sulaiman, T.R Vijayaran, M.K.H. Ariffin and B.T.H.T Baharudin, “Thermal investigation of Aluminium – 11.8% silicon (LM6) Reinforced Sio2-‐Particles”’ AMPT 2009, 26th -‐ 29th October, 2009, Gombak, Selangor, Malaysia.
52. N. Fatchurrohman, S.Sulaiman, M.K.A Ariffin and A.A. Faieza, “The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by sand casting”, ATCI, 3-‐5 November 2009, PWTC Kuala Lumpur.
53. S.Suraya, S. Sulaiman, S.H. Sheikh Md. Fadzullah, M.sayuti and M.K.A Ariffin, “Mechanical anisotropy ptimiza of fused deposition modeling”’ NSPM 2009, 14-‐16 December 2009, Bangi Selangor.
54. Akande, F.B., Ahmad, D., Hadi, S. Samsuddin, S., and Fashina, A.B. (2008): “Status of research on narrow wheels. Paper presented at the 25th anniversary of the Confederation of the Scientific and Technological Associations in Malaysia (COSTAM)”, Malaysian Science and Technology Conference, KLCC, Malaysia. MSTC 2008.
55. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, B.T.Tuah and N.Fachurrohman, “Optimisation and thermal analysis of casting design”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp139.
Page 50/80
56. B.T.H.T.Baharudin, S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, and S.M.Sapuan, “Coating
performance in high speed micro machining of H13 tool steel”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp274.
57. M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman, “A statistical travel time model for miniload automated storage and retrieval system with open-‐rack structure”, Proceedings of 2008 Int. Con. On Artificial Intelligence ICAI 2008 and Proceedings of the 2008 Int. Con. On Machine Learning: Models, Technologies and Application, pp 715-‐721.
58. M.K.A.Ariffin, A.A.Faieza, N.Ismail, B.T.H.T.Baharudin and S.Sulaiman, “Integration of finite element analysis and MATLAB for genetic algorithm optimisation”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-‐5 November 2008, pp199.
59. Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using overall equipment afficeincy (OEE)”, Proceedings – International Symposium on Infromation Technology 2008, ITSim 4, art. No. 4631974.
60. Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Heuristic model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, 3rd International Symposium on Information Technology Kuala Lumpur 26-‐29 August 2008.
61. Shahraki, M. R., Ahmad, M. M. H. b. M., N.Ismail, S.Sulaiman, & Esmaeilian, G. R. (2008). “Optimal Lot Size of EPQ Model Considering Imperfect and Defective Products”. International Conference on Mechanical & Manufacturing Engineering (ICME2008).
62. S.Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and N.Fatchurrohman, “Crushing behaviour of cylindrical and radial corrugated composite tubes”, Proceeding of iC2MS, Melaka, 5-‐7 August 2008.
63. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, Proceeding of int. Conference ICCE-‐16, Kunming China 21-‐25 July 2008,pp663-‐664.
64. A.A. Faieza, S. Sulaiman, M.K.A. Ariffin, B.T.H.T. Baharuddin, “Virtual Training Enhances User Performance” ARCS 2008, 7-‐10 July 2008, Orlando, FL, USA.
65. Ariffin, M. K. A.; Badakhshian, M.; Sulaiman, S. B.; Faeiza, A. A. , “Automated Guided Vehicles Scheduling Optimization by Fuzzy Genetic Algorithm” The 12th World Multi-‐Conference on Systemics, Cybernetics and Informatics: WMSCI, 29 jun – 2 july 2008, Orlando, Florida, USA.
66. B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Coating Performance in High Speed Machining”, AMPT 2008, 2 -‐5 November 2008 Manama, Bahrain.
67. M.Badakhshian, S. B. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Automated Guided Vehicles using Fuzzy Genetic Algorithm”’ International Conference on Mechanical and Manufacturing Engineering, ICME 2008, 21-‐23 May 2008, Johor Bahru Malaysia.
68. M.K.A.Ariffin, A.A.Faieza N.Ismail, B.T.H.T Baharudin and S. Sulaiman. “Intergration of finite element analysis and matlab for genetic alagorithm optimization”, AMPT 2008, 2 -‐5 November 2008, Manama Bahrain.
69. Mostafa badakshian, shamsuddin sulaiman, Mohd khairol anuar mohd Ariffin, “Fuzzy genetic algorithm model for optimization of automated guided vehicle scheduling”, 38th Conference on Computer and Industrial Engineering (CIE38), 31 October – 2 November 2008,
Page 51/80
Beijing, China.
70. S. Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and A.A.Faieza, “Effects of shape and geometry on the energy absorption of fiberglass composite tubes”, International Community for Composites Engineering (ICCE) 16, 20-‐26 July 2008, Kunming China.
71. S.Sulaiman, M.Sayuti and R.Samin “Mechanical properties of the as-‐cast quartz particulate reinforced LM6 alloy matrix composites”, Proceeding of 10th Int. Conf. on Advances in Materials and Processing Technologies AMPT, Korea, 8th – 11th October 2007, pp1733-‐1742.
72. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line and Effect in Supply Chain Management. International Conference In Supply Chain Management, 118-‐127.
73. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Using Human-‐oriented and Process-‐oriented Strategy for improving implementation of TPM in Food Industries. 4th International Conference In Maintenance Management, Iran.
74. S.Sulaiman, elfetori abdewi, M.K.A. Ariffin and N. Fatchurrohman, “Crushing behaviour of cylindarical and radial corrugated composite tubes”, IC2MS, 5-‐7 august 2008, Melaka Malaysia.
75. S.Sulaiman, M.K.A Ariffin, A.A. Faieza and Elfetori F. Abdewi, “Effects of shape and geometry of on the energy absorption of fiberglasss composite tubes” ICCE-‐16, 20-‐26 July 2008 Kunming China.
76. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Manufacturing of Radial Corrugated Composite Tubes for Crushing Behaviour and Energy Absorption”, AMPT 2008, 2-‐5 November 2008, Manama, Bahrain.
77. S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Optimisation of Die Casting Design”, AMPT 2008, 2 -‐5 November 2008. Manama, Bahrain.
78. S.Sulaiman, T.R.Vijayaram and R.Samin, “Squeeze casting technique for processing light metals, alloys and metal matrix composites”, Proceeding WEC 2007, 5-‐9 August 2007, Penang.
79. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008b, 21st – 23rd May, 2008). “Heuristic Model for Improving Risk Priority Number by using Overall Equipment Efficiency International Conference on Mechanical and Manufacturing Engineering” 2008 (ICME2008) Johor Bahru, Johor, Malaysia.
80. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008a). Development of traditional assembly line balancing by using new model assembly line balancing. International Conference on Plant Equipment and Reliability -‐ ICPER 2008.
81. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Development of traditional assembly line balancing using new model assembly line balancing. International Conference on Applications and Design in Mechanical Engineering.
82. S.Sulaiman, Y.P.Lim and M.M.H.M.Ahmad, “Combination effect of grain refiner and modifier on the metallurgical properties of LM6 Al.Si sand casting” Proceeding WEC 2007, 5-‐9 August 2007, Penang.
83. Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line. National Intelligent System and Information Technology Symposium (UPM), 07(2nd), 232-‐240.
Page 52/80
84. Gholam Reza esmaeilian, M.M.H.M.Ahamd and S.Sulaiman, “ Assembly line and balancing assembly line”, Proceeding WEC 2007, 5-‐9 August 2007, Penang.
85. P. Matooriam, S.Sulaiman and MMH. Megat Ahmad, “Using Taguchi quality engineering method to optimize electrical discharge turning”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-‐26 October 2007 Kangar Perlis, Malaysia, pp472-‐476.
86. G.R.Esmaeilian, R.Samin, M.M.H.Megat Ahmad, S.Sulaiman and N.Ismail, “Development of traditional assembly line balancing using new model assembly line balancing”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-‐26 October 2007 Kangar Perlis, Malaysia, pp13-‐17.
87. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ’Lateral collapse of composite radial corrugated tubes’, International Conference on Composite Materials and Nano-‐Structures, iC2MS’06, 25-‐29 April 2006, Shah Alam Selangor Malaysia.
88. T.R.Vijayarm, S.Sulaiman, A.M.S.Hamouda and M.M.Megat Ahmad, ‘Composite materials characterization using SEM: Current status and future trends’, 13th Int. Scientific Conference of Electron Microcopy, Penang Malaysia, 21-‐25 Sept 2006.
89. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “An experimental investigation into crushing behaviour of radial corrugated composite tube”, Third Internation Conference on Structural Stability and Dynamics, ICSSD, 19th-‐22nd June 2005, Florida, USA.
90. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “An experimental investigation of the effect of specimen shape and geometry on the energy absorption of fiber glass composite tubes”, Internation Advanced Technology Congress, IATC 2005 6-‐8 December 2005, Putrajaya Malaysia, pp238-‐245.
91. L. Ying Pio, S. Sulaiman, A.M.Hamouda and M.M.M.Ahmad, “Grain refinement of LM6-‐Si alloy sand casting to enhancement mechanical properties”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.625-‐629.
92. E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.1-‐4.
93. T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Quality control aspects and prospects to reduce rework and rejection in metallurgical industries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp.567-‐570.
94. T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Computer simulation of solidification of castings processed in metallurgical engineering foundries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-‐19th May 2005, Poland, pp571-‐577.
95. Lim Ying Pio, Shamsuddin Sulaiman, “The simulation of sand castings process with MAGMASOFT”, Proceeding of the 2nd INTERNATIONAL Conference on Mechatronics, ICOM’05, 10-‐12 May 2005, Kuala Lumpur, Malaysia, pp789-‐796.
96. Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Quantification of mechanical properties and characterisation of fracture surfaces on the ascast quartz particulate reinforced aluminium-‐ 11% silicon alloy matrix composites”, Abstract published in ICCE12 Spain International Conference Proceedings, 2005.
97. N.Ismail, M.R.Osman, C.F.Tan, S.V.Wong, S.Sulaiman, “Extraction of cylindrical features from
Page 53/80
neutral data format for CAD/CAM integration”, Proceeding of Int. Eng. Convention 2004, 22-‐25 August 2004, Amman Jordan.
98. R. Samin, N.Ismail, S.Sulaiman, R.Ali, M.M.Hassan, “Robot Industry trajectory planning using MSC Visual Nastran”, Proceedings of the 19th International Conference on CAD/CAM, Robotics and Factories of the future (CARS & FOF 2003) 22-‐24 July 2003 Kuala Lumpur, pp. 911-‐918.
99. Suditama Sulaiman, M.M.H.Megat Ahmad, S.Sulaiman, N.Adam,”Experiment Analysis of Thermal Storage Material and Heat Transfer Characteristic pipes arrage heated immerse in the material Thermal Storage”, 3rd Int. Conf. On Advances in Strategic Technologies (ICAST 2003) 12-‐14th August 2003, Kuala Lumpur. Pp1045-‐1048.
100. S.Sulaiman, A.M.S. Hamouda and M.K.A.Ariffin, “Design and Fabrication of Plastic Injection Mould”, Proceeding of AMPT2003, 8-‐11 July 2003, Dublin Ireland, pp1603-‐1605.
101. S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Proceeding of AMPT2003, 8-‐11 July 2003, Dublin Ireland, pp531-‐534.
102. Shamsuddin Sulaiman, “Numerical Analysis of Solidification in Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-‐15 March 2003, Batam Indonesia, pp2.7-‐2.10.
103. Shamsuddin Sulaiman, “An Application of Network Method in Thermal Transient Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-‐15 March 2003, Batam Indonesia, pp2.11-‐2.19.
104. S.Sulaiman, A.M.S Hamouda and M.K.A Ariffin, “Design and fabrication of plastic injection mould”, AMPT 2003, 8-‐11 July 2003, Dublin Ireland.
105. M.K.A Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman, N Ismail, “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, World Engineering Congress 2002, 22-‐25 July 2002, Sarawak Malaysia.
106. M.K.A Mohd Ariffin, S. Sulaiman, M.M. H.Megat Ahmad, “Plastic Flow Simulation of Plastic Injection Moluding Process”, The International Conference on Mechatronics, 12-‐13 February 2001, Kuala Lumpur.
107. Razali Samin, Napsiah Ismail Ismail, Shamsuddin Sulaiman, Roslizah Ali, Md. Mahmud Hasan, “Robot Manipulation Trajectory Planning for Complex Positions”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp425-‐430.
108. Tang S.H., S.Sulaiman, Chia A.P. “Industrial Robot Selection System – A Preliminary Study”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp416-‐418.
109. Rosnah Mohd Yusuff, M.M.H.Ahmad, S.Sulaiman, Z.Mohamad, “Implementation of Computer-‐Based Technologies for the Small and Medium Scales Industries of Malaysia”, Proceding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp102-‐105.
110. Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The Development of Hole Recognition System for Machined Part”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp19-‐22.
111. Tang S.H., Sulaiman.S., Hashmi M.S.J, “Computer-‐Aided Design in Subtractive and Additive Prototyping”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp342-‐346.
Page 54/80
112. Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail, A.M.S. Hamouda “ Design and
Simulation of Plastic Injection Moulding Process”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp193-‐198.
113. M.K.A.Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman and N.Ismail “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp329-‐332.
114. S. Sulaiman, Y.B .Leong, “Development of Thermal Analysis Software of Casting Process, Proceeding of The Second World Engineering Congress 2002, 22-‐25 July 2002, Kuching Sarawak Malaysia, pp189-‐192.
115. S.Sulaiman, “Modelling of Thermal History of Sand Casting Process”, Int. Conf. Of AMPT01, 19-‐21 Sept 2001, Madrid Spain.
116. S.Sulaiman, “An experimental investigation of temperature history of sand casting process”, Int. Conf. Of AMPT01, 19-‐21 Sept 2001, Madrid Spain
117. Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The implemention of feature recognition system for CAD/CAM Integration”, SCORED 2001 UTM.
118. Shamsuddin Sulaiman, “Simulation and verification of thermal transient of sand casting process”, International Conf. On Mechatronic 2001, 13-‐14 Feb 2001 Kuala Lumpur.
119. M.K.A.Mohd Ariffin, S.Sulaiman, M.M.H.M.Ahmad, ”Plastic Flow Simulation of plastic injection Moulding Process”, International Conf. On Mechatronic 2001, 13-‐14 Feb 2001 Kuala Lumpur.
120. Tang, S.H, Sulaiman,S. Hashmi, M.S.J. “Precision Robotic Manipulator based Rapid Prototyping System”, Proceeding of the IASTED Int. Conf. Robotics and Automation 2000, August 14-‐16, 2000, Honolulu, Hawai USA.
121. S.Sulaiman. A.M.S.Hamouda, ”Modelling of thermal history of sand casting process”, 5th Asia Pacific Conference on Material Processing 25-‐27 June 2001 Seoul, Korea.
122. S.Sulaiman, A.K.H.Lim, C.L.Tan “An experimental investigation of temperature history of sand casting process”, Proceeding of ICAMT2000 UTM, pp299-‐304.
123. S.Sulaiman, A.K.H.Lim, “Modelling of Thermal Analysis of Sand Casting Process”, Proceeding of ICAMT2000 UTM, pp595-‐600.
124. S.Sulaiman, A.M.S.Hamouda, “An experimental investigation of temperature history of sand casting process”, Int. Conference on Advances in Strategic Technologies-‐ 2000 UKM Kuala Lumpur 15-‐17 August 2000.
125. M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Finite Element Simulation And Optimization Of Plan Strain Closed Die Forging Process, International Conference On Advances In Strategic Technology, ICAST 2000, 15-‐17 August 2000, Malaysia.
126. M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: on the influence of unequal friction into load, metal filling and residual stresses in closed die forging process: finite element approach, 3rd international conference on mechanics and material in design, 29-‐31 may 2000, Orlando, USA.
127. M. A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Development of CAD/CAM System for Closed-‐Die Forging Process, International Manufacturing Conference in
Page 55/80
China, (Hong Kong, 16-‐17 August 2000).
128. C.K.Ooi, M.M.H. Megat Ahmad, M.R.Osman, M.Y.Rosnah, S.Sulaiman, M.Y.Ismail, “The Effectiveness of Managing Long Lead-‐Time Parts by Family Ordering”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp459-‐464.
129. M.A.Hossain Mollah, S.M.Sapuan, S.Sulaiman,”Design Aspects of A Composite Material Country Boat”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp429-‐434.
130. S.Sulaiman, M.R.Osman, Y.K.Chin,”Design and Development of an Automated Orientation Detection System with Robot Arm and PLC Integration”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp363-‐367.
131. Y.C.Low, M.R. Osman, S.Sulaiman, N.Ismail, “ Investigation Of The Need For Local Plastic Injection Moulding (PIM) Robot”, ”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp357-‐361.
132. S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental analysis of metal filling in diecasting process”, Proceeding AMPT ’99, 3rd – 6th August ’99, Dublin, Ireland.
133. S.Sulaiman, W.K.Binienda, Y.Wang, “Internal Pressure Effect on Residual Stresses for Filament Wound Composite Tubes”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur., pp51-‐55.
134. S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-‐21 May 1999.
135. Elfetori F. Abdewi, S.Sulaiman, A.M.S.Hamouda, “Computational Study on the Effect of Thermal Stresses on Die Casting Design”, Proceeding of World Engineering Congress 19-‐22nd July 1999, Kuala Lumpur, pp337-‐343.
136. A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland..
137. S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-‐21 May 1999.
138. A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland.
139. F.Hassan, S.Sulaiman, A.M.S.Hamouda, “Casting materials: Recent advances and application “, Int. Conf. Of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur, pp134-‐144.
140. Elfetori F. Abdewi, S.Sulaiman, A.M.S. Hamouda, Megat M.Hamdan,”Finite Element Analysis and Optimization of Die Casting Design”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur,pp1006-‐1016.
141. S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-‐Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-‐29 August 1998, Kuala Lumpur, pp1017-‐1028.
142. S. Sulaiman, A.M.S.Hamouda and S.Abedin, “Development of Computer Aided Design (CAD) system for casting process”, Proc. of Int. Conf. on Advences in Materials and Processing
Page 56/80
Technologies, AMPT-‐97, Portugal, June 1997.
143. M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Development of a mathematical model for zinc oxide varistor for low weight loss and shrinkage rate”, Proceeding of Int. Conf. on Advances in Materials and Processing Technologies, AMPT-‐97, Portugal, June 1997.
144. M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Optimization of sintering process for improved electrical characteristics of Zinc Oxide Varistors”, Proc.of Int. Conf. FAIM’96 Georgia USA pp.739-‐747.
145. Shamsuddin Sulaiman, Tang Sai Hong, “Gating system design in sand casting”, Proceeding of the 7th Int. Conf. on Machine Design and Production, Turkey Sept 11-‐13 1996.
146. Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Proceeding of Int. Con. on Material Processing, Hong Kong 12-‐14 Nov. 1996.
147. A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Proc. of the 6th Int. Conference on Metal Forming ’96, Krakow Poland, Jun23-‐26 1996 pp.723-‐727.
148. Shamsuddin Sulaiman, “Expert System for Manufacturing Process”, Proc. Pacific Conf. on Manufacturing December 19 -‐ 22, 1994, Jakarta Indonesia pp.339-‐346.
149. Shamsuddin Sulaiman, Shahnor Basri, “An Application of Expert System in the Casting Process”, 5th International Conf. on Machine Design and Production September 16-‐18 1992, METU, Ankara-‐Turkey.
150. S. Sulaiman, D.T. Gethin, “An Application of a Thermal Network Analysis for Casting Simulation”, Proceedings of the 7th International Conference on Numerical Methods in Thermal Problems 1991. (Eds. Lewis, R.W., Chin J.H. and Homsey G.H), pp248-‐258.
Other Publications (Local/International News Coverage) NO Title
1 M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin, K,Abdan and M.R. Mansor, “Preliinary study the effect of packing pressure on thin-‐walled parts by injection moulding process”, The 2nd UPM-‐UniKL Symposium, on Polymeric Materials 2013, 28February 2013
1. M.U. Rosli, M.K.A. Ariffin, S.M. Sapuan and S. Sulaiman, “Material selection of thermoset matrix for natural fiber composites automotive armrest using AHP Method”, The 2nd UPM-‐UniKL Symposium, on Polymeric Materials 2013, 28February 2013.
2. M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin, A.A.Faieza and BT Hang Tuah Baharudin,’Optimization of plate forming process parameters’, Proceedings of EnCon2010, 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Suatainable Environment, April 14-‐16, 2010, Kucing Sarawak, Malaysia.
3. G.R.Esmaelian, M.M.H.M.Ahmad, S.Sulaiman, N.Ismail, “Assembly line and balancing assembly line”, Intelligent System and Information Technology Symposium 2007, 30-‐31 October 2007, ITMA, UPM Serdang Selangor.
4. S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A comparison study on increasing injection location for glass fiber reinforced PA 6,6 composite automotive clutch pedal”, Proceeding of 3rd National Technical Postgraduate Symposium 2004 Dec 15th Kuala Lumpur.
Page 57/80
5. S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman “Mould Design Consideration for Injection
Moulding of Short Glass Fiber Reinforced Polyamide Composite for Clutch Pedal”, Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.
6. A. Manaf, N.Ismail, S.Sulaiman "Reverse Engineering Technique for Modelling Free form Feature Surfaces" Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.
7. P. Nopnakorn, N.Ismail, MMHM Ahamad, S.Sulaiman "A Prototype 2D Drafting System in ISO Mechanical Engineering Drawing Constraint" Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.
8. S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product design consideration for short glass fibre reinforced composite clutch pedal” Proceeding of Advanced Technology Congress 2003, 20-‐21 May 2003, Putrajaya.
9. C.F.Tan, N.Ismail, S.V.Wong, S.Sulaiman and M.R.Osman "Development of A knowledge-‐based Feature Recognition for System for Mechanical Parts" Proceeding of AIAI Conf. 24-‐25 June 2003, Kuala Lumpur.
10. Ishak bin Aris, A.K.M.Parves iqbal, Shamsuddin Sulaiman, Abd. Rahman Ramli and Md Mahmud Hassan, “Development of a painter robot for construction industry”, Proceeding of AIAI Conf. 24-‐25 June 2003, Kuala Lumpur.
11. H.B.Lee, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad, ”Design and Rapid Prototyping Process for a Polymeric Based Composite Automotive Pedal Box System”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-‐based Composite Automotive Components, 25th July 2003, Faculty of Engieering UPM, Editor Mohd Sapuan Salit, pp5-‐20.
12. S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product Design Consideration for Short Glass Fiber Reinforced Composite Clutch Pedal”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-‐based Composite Automotive Components, 25th July 2003, Faculty of Engineering UPM, Editor Mohd Sapuan Salit, pp55-‐63.
13. N. Ismail, C.F.Tan, S.V.Wong, M.R.Osman, S.Sulaiman, “ Rule-‐Based Feature Extraction and Recognition from STEP File”, 2nd Student Conference on Research and Development (SCOReD2002), July 16-‐17, 2002, Shah Alam, Malaysia.
14. Shamsuddin Sulaiman, A.K.Lim, Lai Tze Siung, Tan Chen Loon, “ Experimental and Thermal Transient of Sand Casting Process”, MechE Seminar on Information Technology in Mechanical and Manufacturing Engineering, 4th Oct 2001, UPM.
15. S. Sulaiman, Wong Choon Tat, “Mould design and fabrication for plastic injection moulding”, Malaysian Science and Technology Congress (C) 2001, Penang.
16. S. Sulaiman, Wong Choon Tat, “Design, Analysis and Simulation of plastic product”, Malaysian Science and Technology Congress(B) 2001, Melaka.
17. Elnougomi A.O, Desa Ahmad, Azmi Yahya, Shamsuddin S., “Development of tractor mounted peanut harvesting equipment”, UPM Engineering Research Seminar and Exhibition, 2-‐3 Oct 2001.
18. A.M.S. Hamouda, S. Sulaiman, “The Coming Era of Intelligent Materials: Business Opportunities”, Malaysian Science and Technology Congress ‘97, Genting Highlands, 13 -‐ 15 October 1997.
19. Shamsuddin Sulaiman, “Thermal Network Analysis for Casting Process in High Pressure Die Casting”, National Conference on Engineering Education and Research, 15-‐16 June 1993, UPM.
Page 58/80
20. S.Sulaiman, A.M.S.Hamouda and M.H.Megat, “Thermal Network Analysis Software TNAS”, Report
and Manual presented in Expo Science and Technology, 2-‐4 Nov 2002, PWTC Kuala Lumpur.
21. Gasing plastic, Menyusur akar orang kita, 6 Feb 2014 (Laporan Khas TV1, 6 Februari 2014: Jam 12:30 – 13:00)
f. Recognition/Awards
No Year
1. 2016 William Johnson Gold Award (Research and Academic Achievement)
2. 1998-‐2018
Excellent in Service Award 1998-‐2018
3. 2011 2 Bronze medals Research Award 4. 2011 Silver Medal for Invention, Research and Innovation Exhibition, Universiti Putra
Malaysia, 2011 (Investigator)
5. 2009 Bronze Medal for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2009 (Principal Investigator)
6. 2005 Silver Jublee Medal with zirconia, Research Award – Poland May 2005 Silver Medal Research Award (TNAS) – Invention and Research Exhibition Silver Medal Research Award (Corrugated Tubes Machine) Bronze Meal Research Award (Analysis and Fabrication of Injection Molded glass polyamide composite) Bronze Medal Research Award (Development of Intelligent Process Planning system for prismatic parts)
7. 2003 Who’s Who in the World 20th Edition 2003
8. 2002 Gold Medal Research Award – R&D Exhibition UPM Silver Medal Research Award – Expo S&T 2002 Ministry of Science, Technology and Environment of Malaysia
9. 1995 Asian Development Award for training in Akron Ohio USA Felowship program in China-‐ UNESCO 1995
H. Professional Services
a. International No Detail Designation Year
1. 7th UNIKOP Regional Development Symposium,Kirikkale University, Turkey, Oct 17-‐19, 2019.
Keynote Speaker
2. International Conference on Advanced Material Processing Technology , Taipei, Taiwan, 20-‐24 Oct 2019
Steering Committee Member 2019
3. International Conference on Advances in Mechanical and Manufacturing Engineering 2019, 20-‐24 Oct
Organising Committee Member 2019
Page 59/80
2019, Langkawi Malaysia
4. International Conference on Advanced Material Processing Technology , Dublin Ireland, 25-‐28 Sept 2018
Steering Committee Member 2018
5. 2018 International Conference on Material Engineering and Manufacturing, May 26-‐28, Xi’an China
Program Chair Plenary Speaker
2018
6. International Conference on Advanced Material Processing Technology ,Chennai India, 4-‐9 Oct 2017 2016
Steering Committee Member 2017
7. International Conference in Computional Methods in Engineering and health sciences (ICCMEH)
International Advisory Board Since 2017
8. International Conf. on Industrial Engineering and Industrial Management, Rome, Italy Jan 3-‐5, 2017.
Technical Committee Member Since 2017
9. International Manufacturing Engineering Conference iMEC
International Advisory Committee Since 2017
10. 2nd International Conference on Mining, Materials and Metallurgical Engineering March 17-‐19, 2017, Bangkok, Thailand
Program Chair 2017
11. International Four Seminars on Elsevier Materials Reference Module to Chinese Librarians Oct 16, Beijing, China Oct 18, Jinan, Shangdong Provinve, China Oct 20, Zhengzhou, Henan Province, China Oct 22, Shijiazhung, Hebei Province, China
Main Speaker 2017
12. International Conference on Advanced Material Processing Technology ,Kuala Lumpur, 15-‐19 Sept 2016.
Steering Committee Member 2016
13. Elsevier eBook Forum, 5-‐7 Sept 2016, Singapore
Panel Forum 2016
14. Journal of Industrial and Inteligent Information, USA
Editorial Board Since 2016
15. International Conf. on Design, Materials and Manufacturing, Kuala Lumpur, 25-‐27 May 2016.
Keynote Speaker/International Advisory Commettee member
2016
16. 2006 International Conference on Mechanical, Manufacturing, Modelling and Mechatronics (IC4M 2016), Kuala Lumpur, 27-‐29 Feb 2016.
Program Committee Chair 2016
17. International Conf. on Mechanical Automation and Control Engineering, February 27-‐29, 2016, Phuket, Thailand
Technical Committee member 2016
18. Collaboration Meeting/Visit for Manufacturing Diesel Engine, by Uni-‐Tech Saudi Arabia, Jubail Industrial City, 31961 Jubail. 18-‐21 Feb 2016.
Panel Meeting 2016
Page 60/80
19. 5th International Conf. on Key Engineering Materials
(ICKEM 2015), March 21-‐23, 2015, Singapore.
Honorary Chair 2015
20. Internaational Conf. on Material, Engineering and Technilogy (ICMET 2015), July 1-‐2, 2015, Bali Indonesia.
Honorable Committee Member 2015
21. 4th International Conf. on Manufacturing and Industrial Engineering (ICMIE 2015), March 21-‐23, Singapore.
Honorary Chair 2015
22. Jurnal Kejuruteraan UKM International Advisory Board Member
1st Jan 2015 – 31st Dec 2018
23. American Journal of Software Engineering and Application
Editorial Board Since 2015
24. International Conference on Advanced Material Processing Technology, Madrid, Spain, Dec 14-‐17 2015.
Steering Committee member 2015
25. Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-‐18, 2014, Bangkok, Thailand.
Honorary Chair 2014
26. International Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-‐18, 2014, Bangkok, Thailand.
Keynote Speaker 2014
27. CUTSE2014 Curtin University Science and Engineering International Conference, 3-‐4 December 2014, Kucing, Sarawak, Malaysia.
Scientific Committee Member 2014
28. 4th International Conference on Key Engineering Materials (ICKEM2014), March 22-‐23, 2014, Bali Indonesia.
Honorary Chair 2014
29. International Conference on Advanced Material Processing Technology, Dubai UAE, Nov 16-‐20, 2014.
Steering Committee member 2014
30. American Journal of Software Engineering and Application
Editorial Board Member 2014 – To date
31. International Journal of Optimization Control: Theories and Applications
Editorial Board Member 2013 – To date
32. International Conference on Advanced Material Processing Technology, Taipei, Taiwan. Sept 22-‐26, 2013.
Steering Committee member 2013
33. International Conf. on Advances in Mechanical and Manufacturing Engineering (ICAM2E) 2013, Kuala Lumpur.
Organising Committee Member/ Session Chairman
2013
Page 61/80
34. 2013 World Congress on Electronics and Electrical
Engineering, December 29-‐30, 2013, Kuala Lumpur.
Program Chair 2013
35. Int. Conf. of Manufacturing Engineering (iMEC) Kuantan Pahang, Malaysia, Sept 21-‐23, 2013.
International Advisory Committee 2013
36. Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-‐21, 2013.
Conference Chair 2013
37. Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-‐21, 2013.
Keynote Speaker 2013
38. International Conference on Advanced Material Processing Technology Wollongong Australia, 23-‐25 Sept 2012.
Steering Committee member 2012
39. International Conference on Advanced Material Processing Technology ,Istanbul, Turkey 13-‐16 July 2011
Steering Committee member 2011
40. International Conference on Advanced Material Processing Technology Paris, France, Oct 2010.
Steering Committee member 2010
41. International Journal of Optimization and Control: Theories & Application, ISSN: 2146-‐0957, eISSN:2146-‐5703, Dora Co. Ltd, Bursa, Turkey
Editorial Advisory Board 2010-‐To date
42. International Conference on Advanced Material Processing Technology, Kuala Lumpur, Malaysia, September 2009.
Steering Committee member 2009
43. Journal of Advanced Material and Processing Technology, Taylor and Francis
Editorial Board Member 2009-‐to date
44. International Conference on Advanced Material Processing Technology, Manama, Bahrain Oct 2008.
Steering Committee member 2008
45. International Conference on Advanced Material Processing Technology Seoul, Korea, October 7-‐10, 2007
Steering Committee member 2007
46. 12th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2006, Gliwice, Poland. 27-‐30 November 2006.
International Programme Committee Member
2006
47. International Conference on Advanced Material Processing Technology Las Vegas, Nevada, USA, July 30-‐August3, 2006.
Steering Committee member 2006
48. 11th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2005, Gliwice, Poland. 6-‐9 December 2005.
International Programme Committee Member
2005
49. International Conference on Manufacturing and International Committee Member 2006
Page 62/80
Material Processing, Kuala Lumpur March 2006.
50. International Conference on Achievements in Mechanical and Material Engineering, Gliwice-‐Wisla, Poland. 16-‐19 May 2005
International Committee Member 2005
51. International Conference on Advanced Material Processing Technology Gliwice-‐Wiala, Poland. 16-‐19 May 2005
Steering Committee member 2005
52. 3rd International Conference on Advanced Manufacturing Technology ICAMT 2004, Kuala Lumpur, 15-‐18 May 2004
International Committee Member 2004
53. 12th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Gliwice-‐ZaKopane Poland 7-‐13 Dec 2003
International Committee Member 2003
54. 11th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Poland 10-‐13 Dec 2002.
International Committee Member 2002
55. International Conference on Advanced Material Processing Technology 8-‐11July 2003 Dublin, Ireland
Steering Committee member 2003
56. International Conference on Advanced Material Processing Technology 19-‐21 Sept 2001 Madrid Spain
Steering Committee member 2001
57. Advances in Material and Mechanical Engineering Conference AMME , Poland, 20-‐22 Sept 1999.
International Committee Member 1999
58. International Conference on Advanced Material Processing Technology, 2-‐6 August 1999 Dublin, Ireland.
Steering Committee member 1999
59. 10th Jublee International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2001 Cracow, Poland 9-‐13 Dec 2001
International Committee Member 2001
60. Symposium on Advanced Materials & Design , 29-‐31 May 1999 Orlando USA.
International Committee Member 1999
61. International Conference on Advanced Material Processing Technology 27-‐29 August 1998 Kuala Lumpur
Chairman 1998
b. National No Detail Designation Duration
1. Bac. Eng. Hons (Manufacturing eng). Faculty of Mechanical Engineering UMP, Pekan, Pahang.
External Assessor 2019-‐2020
Page 63/80
2. Infrastructure University Kuala Lumpur
IUKL
Industrial Advisory Panel
2015-‐2016
3. B. Tech (Manufacturing) B.Tech (Product Design) Dept. of Manufacturing Technology Faculty of Engineering Technology, UTeM.
External Assessor 2014-‐2017
4. Bac. Tech (Manufacturing). Faculty of Mechanical Engineering UMP, Pekan, Pahang.
External Assessor 2013-‐2016
5. B.Eng (Manufacturing) University of Malaya.
Advisory Panel 2014
6. Lembaga Pengelola Sekolah Menengah Agama MAIWP
Board Member 2014-‐2018
7. Research Grant Ministry of Higher Learning, Malaysia
Assessor Panel 2013-‐2019
8. Board of Study MSc Eng (Manufacturing Eng) IIUM.
Advisory Panel 2013-‐2016
9. Board of Study (Bac. Tech. Manufac. Design), IPROM UniKL
Industrial Advisory Panel Member
2013-‐2015
10. B. Eng Tech (Automotive) MSI, UniKL, Kulim
External Assessor 2013-‐2021
11. Bac. Sc (Manufacturing Eng) School of Mechanical Eng. USM.
External Assessor 2008/2009
12. UITM, UTM, UKM, IIUM, UMP, UTeM, UniKL, USM,
External Assessor Panel (Promotion of Professorship)
2005-‐ To date
13. Bac. Sc (Mech). Faculty of Mechanical Engineeirng UMP, Pekan, Pahang.
External Assessor 2012-‐2013
14. Master of Eng (Manufacturing) School of Manufacturing Engineering, UNIMAP.
External Assessor 2013/2014-‐2014/2015
15. Jabatan Perkhidmatan Awam (Federal Training Funds)
Expert Panel/Judge 2013
16. Board of Study (MS Manufac. Eng) International Islamic University Malaysia
Advisory Panel Member 2011-‐2012
17. TATI Univ. College, Kemaman. External Assessor 1st June 2009-‐30th May 2011
18. Malaysian Qualifications Agency (MQA) Expert Panel 1998-‐ To date
Page 64/80
19. Department of Mechanical Engineering
University Tenaga Malaysia (UNITEN)
Industirial Advisory Panel Member
1st July 2009-‐30th June 2011
20. 9th National symposium on Polymeric materials 2009 15-‐16 December 2009, Hotel Residence, UNITEN
Committee Member 2009
21. National, National Symposium on Polymeric Materials 2009
Scientific Committee 2009
22. National, Conference proceeding 9th National Symposium of Polymeric Materials NSPM 2009
Chief Editor 2009
23. National, National Symposium on Polymeric Materials 2009
Advisor 2009
24. Bhg Pendidikan dan latihan (Kemahiran) MARA
Curriculum Advisory Committee
2005-‐To Date
25. National Vocational Training Council Ministry of Human Resources, Malaysia
Trade Advisory Committee (Foundry)
1999-‐ to date
26. Advanced Material Working Group Ministry of Science, Technology and the Environment of Malaysia
National Working Committee
1997-‐2002
27. Japan-‐Malaysia Technical Institute (JMTI) Ministry of Human Resources, Malaysia
Chairman, National Training Advisory
Committee
1999-‐ To date
28. The Second World Engineering Congress 22-‐25 July 2002, Kuching Sarawak, Malaysia
Technical Committee (Manufacturing Division)
2002
29. Grant Evaluation Committee (Manufacturing/Engineering and Technology Division) Ministry of Science, Technology and the Environment /Innovation of Malaysia
Panel Member 2000 – To date
30. Kolej Negeri, Seremban
Advisory Member 2002-‐2005
31. Research & Development Exposition 2003 9-‐12 October 2003 PWTC Kuala Lumpur
Organising Committee Member
2003
32. National Vocational Training Council Ministry of Human Resources, Malaysia
Trade Advisory Committee (Plastic Industry)
1995-‐1998
33. Development of Curriculum for National Occupational Skill Standard, National Vocational Training Council Ministry of Human Resources, Malaysia
Committee Member Oct 1992-‐1996
Page 65/80
c. Technical Reviewer (Selected)
No Journal/Conference Designation Duration
1. Materials and Design
Reviewer 2005-‐ to date
2. Material Processing and Technology
Reviewer 2001-‐To date
3. Alloys and Compound
Reviewer 2014-‐ to date
4. ICAM2E, Conference
Technical Reviewer 2013
5. Ain Shams Engineering Journal
Reviewer 2013-‐to date
6. Machining Science and Technology
Reviewer 2012-‐ to date
7. Journal of Mechatronics
Reviewer 2008-‐to date
8. Journal of Petroleum and Gas Engineering
Reviewer 2010-‐ to date
9. Journal of ISSAAS
Reviewer 2011-‐ to date
10. IEM Journal of Institute of Engineer Malaysia
Reviewer 2001-‐to date
11. Key Engineering Material 2010
Reviewer 2010
12. World Engineering Congress 2010, Serawak
Technical Reviewer 2010
13. NSPM 2009, National Symposium of Polymeric Materials
Technical Reviewer 2009
14. World Engineering Congress 2007, Penang
Technical Reviewer 2007
d. Examiner/ Evaluator
PhD External Examiner (International)
No Title Name Univ. Year
1.
Numerical and experimental investigations on forming limit analysis for AISI 316, 316L and 316LN austenitic stainless steel
Ramados Anna, India
2008
2. Mechanical alloying, spark plasma sintering and characterisation of Fe-‐Ni nanopowder
T. Ashokkumar Anna, India 2011
3.
Theoretical and experimental studies on evaluation of friction factor in extrusion process of AA6063 and AA6063/SiCp composites
V. Jayaselan Anna, India 2013
4. Experimental Investigation on drilling of polymer matrix composites and GFRP/Aluminium stack
R. Raja Anna, India 2015
5. Significance of equal channel angular pressing A.T. Vijaya Anna, 2015
Page 66/80
parameters on the structural enhancement of commercial purity copper
Shakrhivel India
6. Optimization of process parameters of dissimilar aluminum joint by friction stir welding
Sabitha Jannet Anna, India 2016
7.
Study on influence of coated tool electrode in electrochemical micromachining of Inconel 718 alloy
S.Subramaniam Chennai, India 2017
8. Intelligent classification techniques to detect malicious nodes in mobile adhoc networks
A.R. Rajeswari Chennai India
2017
9.
Design, simulation and performance analysis of a modifies architecture for 3D network on 3D printing Industry
A. Karthikeyan Chennai India 2017
10. Experimental parametric analysis on AL-‐6061 honeycome core sandwich structure under flexural and low velocity impact test
K. Kalichelvan Chennai, India
2019
PhD External Examiner (National)
No Title Name Univ. Year 1.
Microstructures and Mechanical Properties of Aluminium-‐Silicon Bar Produced by net shape Casting Process
Dodi Proyitno
UTM
2001
2.
Numerical and Experimental Analysis of Powder Compaction Process
Md Mujibur Rahman
UKM
2001
3.
Prehated machining of hardened steel AISI D2 and optimization of parameters
Mohd Amri Lajis
IIUM
2009
4.
Development of Metal Injection moulding
Khairul Rijal Jamaluddin
UKM
2009
5.
Effect of Surface roughness on micro-‐idententation
Chuah Hun Guan
USM
2012
6.
Optimization process on Powder injection Moulding
Nur Hafiez Mohamad Nur
UKM 2012
7.
Optimization of machining processes by using criteria of maximum productivity and Mionimujm cost
Aead M. Ahmed
UNIMAP
2012
8.
Design and Development of impeller Wind Turbine
Ahmaed Younus Qasim
UNIMAP
2012
9.
Pendekatan kawasan kerja untuk meramalkan pembidas bagi jasad putih automotif bahagian dibentuk
Nagur Aziz Kamal Bashah
UKM
2013
10.
Theoretical modelling of process performance in micro-‐electro-‐discharge machining for nonconductive ceramics
Abu Naim Muhammad Abdus Sabur
IIUM
2014
Page 67/80
11.
Modeling of processing condition for polypropylene-‐nanaclay integral hinges at high heat exposure,
Mohd Hilmi Othman
UTHM
2015
12.
Effect of tool path strategies on machining performance
Muhammad Riza
IIUM
2015
13.
Mahalanobis-‐ Taguchi system as a decision making tool for remanufacturing automotive component
Mohd Yazid Abu
UTM
2015
14.
Pembangunan Aloi aluminium untuk pemprosesan logam separa pepejal
Mohd Shukur Salleh
UKM
2015
15.
Penghasilan kelli tahan karat berbusa melalui kaedah pengisi pemegang ruang-‐pengacuanan suntkan logam
Tan Koon Tatt
UKM
2015
16.
Effect of substrate thickness layer on the mocrostructure , mechanical and wear properties of AlTiN layer coating deposited on Tungsten Carbide insert cathodic arc PVD technique
Kamil Jawad Kadhim
UTeM
2015
17.
Process parameter effects on Low-‐cost hybrid structure of dissimilar materials made by friction stir welding
Sadiq Aziz Hussein
UTeM
2016
18.
An experimental and simulation studies of transient heat transfer in electronic packaging
Ong Kean Aik
USM
2016
19.
Layed manufacturing of functionally graded polymer matrix composite (PMC) materials via fused deposition modellinf (FDM)
Nasuha bin Sa’ude
UTHM
2016
20.
Framework for on-‐site welding of creep strength enhanced ferrite (CSEF) pipes for supercritical condition steam
Muhammad Sarwar
UTP
2016
21.
Development and application of Ultrasonic Soldering for lap joint between Galss and Pewter
Mohd Yusry Mustafa
IIUM
2016
22. Correlation of tool engagement and tool path strategy
Roshaliza Hamidon IIUM 2016
23. Surface modification of stainless steel Zakaria bin Mohd Zain
IIUM 2017
24.
Development and characterization of local silica sand as mould materials for copper and aluminium alloy casting
Siti Zaleha Mohd Nor
UMT 2017
Page 68/80
25. Machinability study and analytical model development during HS ductile machining
Nasima Bagum IIUM 2017
26. Experimental and Simulation of Residual Stress Relaxation of 2024-‐T351 Aluminium Alloy.
Fareg Saeid Moftah Ali UNITEN 2017
27. Mitigation of BWE inintegrated manufacturing H.M.Emrul Kays IIUM 2017
28. Surface enhancement of friction stir welding tool Seyed Sattar Emamian UTP 2017
29. 3D Reconstruction and Design of Patient specific implant based on computed tomography images
Johari Abdullah USM 2018
30. Experimental investigation and molding on MG, TIG and laser welding of Aluminium alloy EN AW 6082-‐T6
Elfi Rahayu binti Imam Fauzi USM 2018
31.
Studies on microstructural and wear properties of Fe-‐Base hardfacing materials deposited on carbon steel based metal
Afzalleh Jilleh UITM 2018
32.
Thixoforming A319 Aluminium alloy with copper and magnesium addition for wear properties enhancement
Khaled S.M. Alhawari
UKM 2018
33.
Experimental analysis of coated and uncoated carbide tool in drilling AISI316L austnite stainless steel using minimum quality lubricant technique
Mukhtar bin Malik UMP 2018
34. Laser surface modification of grey cast iron for surface properties improvement
Zulhishamuddin Abdul Rahman UMP 2018
35. Thermal and surface integrity study of AZ31C Magnesium Alloy influenced by cryogenic turning
Mohd Danish UTP 2018
36. Effect of deposition of nanoparticles during joining of dissimilar metals by friction stir welding
Baridula ravinder Reddy
UMP 2018
37.
An algorithm for minimization of nosocomial infection risk through upgrading and re-‐architecting of healthcare facilities
Yasaman Parsia UMP 2019
38. Laser surface melting to enhance surface properties in hot press forming die
Norhafzan binti Bariman
UMP 2019
39. Summation od the spectral expansion associated with the solvability of the heat and wave problem
Fargana Akter IIUM 2019
40. Development of Generative Computer-‐Aided Process Planning System for Lathe Machining
Ahmad Faiz bin Zubair USM 2019
41.
Mechanical, Thermal and Electrical Properties of ABS-‐NiZn-‐FeO composites fabricated using FDM 3D Printer
Shulizawati Aqzna bt Sazali UniMAP 2019
42. The influence of quality under supply chain management
Abdullah AlRashidi IIUM 2019
Page 69/80
43.
Fatigue life and mechanical properties of aluminium alloy AA6061 chips prepared by solid-‐state recycling using hot extrusion
Mohammed Hussein Rady UTHM 2019
44. Mechanical and formability analysis of low laser welded dissimilar AA5052-‐H32 and AA6061-‐T6 Aluminium Alloys
Mohd Fadzil Jamaludin
USM 2019
Master External Examiner (National)
No Title Name Univ. Year 1.
Analysis of Flow Phenomena in Metal Injection Moulding Process
Nor Hafiz Mohamad Nor
UKM
2001
2.
Static and Dynamic Analysis of a Drawing Die
Sethuraman s/o Vatiapan
UM
2000
3.
Evaluation of cost effective of Manufacturing Processes for producing Metal implant
Mohamad Tarmizi Omar
USM
2002
4.
Kajian Eksperimen dan Komputer bagi perolakan tabir di atas permukaan isoterma dan bukan-‐isoterma pada perbezaan sudut condong
Sii Tuong Ngan
USM
2003
5.
Effects of induced damages on the flexural fatique behaviour of glass fiber reinforced epoxy (GREs)
Wong Teck Kai
UNIMAS
2003
6.
Numerical simulation failure of steel plates impated by blunt nose projectiles using pam shock
Faidzuli bin Ismail
USM
2004
7.
Development of a computer aided die design system (CADDS)
Azuddin Mamat UM 2004
8.
Pemprosesan Selari Dalam Simulasi Perambatan Retak Menggunakan Kaedah Induk-‐Pekerja
Choy Hau Yan
UKM
2004
9.
Heat transfer of compact heat exchanger
Shamsul Bahari bin Azraai
USM
2005
10.
Optimal design of femoral hip prosthesis using topology optimisation to reduce stress shielding
Mohamad Ikhwan Zaini bin Ridzwan
USM
2005
11.
Failure Analysis of Low-‐Velocity impact on composite plate
Muhammad Zulkarnain
USM
2005
12.
Thermal Management of both component and system levels in Elctronics Packaging
Ong Kean Aik
USM
2006
13.
Prediction of microelectronics encapsulation process using finite difference method
Mohammad Khalil Abdullah
USM
2006
14.
The relationship between the applied torque and stresses in post-‐tension structures
Liew Fui Kiew
UNIMAS
2006
Page 70/80
15.
A study on the effect of different solder constitutive models on the life time estimation of Lead-‐Free Solder joint using finite element method.
Abdullah Aziz Saad
USM
2006
16.
Kerlakuan aliran dalam process pengacuan suntikan logam.
Norazizah Ma’som
USM
2007
17.
Kajian eksperimen dan berangka bagi dua pakej PLCC dipasang debaris secara mengufuk.
Sharupuddin Yusoff
USM
2008
18.
Design and geometric optimization of an axial ventricular assist device for reduced blood shear stress
Dhyaa Hadi Hussein
USM
2009
19.
Design and analysia of mechanical mating interfaces for reconfigurable machine tool
Normariah Che Maideen
USM
2010
20.
Product design and development
Salina Budin
USM
2011
21.
Thermal effect on packaging process
Ahmad Razlee
USM
2011
22.
Development of tool and jig of machining
Mazlan Mohamed
USM
2011
23.
Development of packaging device Khaleed Hussein
USM
2011
24.
Numerical Method for Chip Flip Packa
Mior Firdaus Mior Abdul Majid
USM
2012
25.
Development of multi-‐component device loads, torque and temperature measurement for Friction Stir Welding Process
Jauhari Tahir Khairudin
USM
2012
26.
Effect of moisture on ABS Filament material for FDM Rapid Prototyping
Siti Nur Amalina Mohd Halidi
USM
2013
27.
Thermal performance analysis and characterization for mobile radio
Chee Jiunn Shyong
USM
2013
28.
Effect of variable helix and pitch tool geometry on the process damping performance in End milling processes
Muhammad Adib Shaharun
UMP
2014
29.
Development of Natural fibre composite for engineering application
Nurul Farah Adibah Mohd
UTeM
2014
30.
Experimental and Statistical analysis for surface modification of steel and cast Iron using Nd:YAG Laser
Fazliana Fauzun
UMP
2015
31.
Surface roughness optimization (Opsurf) in Milling Operation of Polyurethene Block
Louis Denis Kevin UNIKL 2015
32. Investigation of Aluminium powder based feedstock mouldablity and optimization of mixing and injection moulding process parameter
Nurun Nahar Begum UM 2015
Page 71/80
33.
Effect of injection moulding parameters on warpage deflection
Siti Salamah Mohd Sani
UTeM
2015
34.
Thermal response on nanofluids in the presence of magnetic field with variable stream condition.
Vibhu Vignesh Balachandar
UTHM
2015
35.
Simulation studies and experimental investigation of temperature and residual stresses in dissimilar metal joints by friction stir welding technique
Yattapu Yaseanth
UMP
2016
36.
Morphometric analysia and fabrication of prosthetic ear using cad/cam and additive manufacturing technologies
Nor Azura bt Mohamed
USM
2016
37. Determination of Electrical measurement to detect poor thermal dissipation devices using TRIZ
Ong Ming Chung UTeM 2016
38. Numerical analysis during encapsulation process in molded underfill with multi flip chip package
Muhammad Afiq bin Azmi USM 2016
39.
Improvement of Machining Performance for steel grade 760 using Magnetic field assisted Al2O3 powder-‐mixed EDM
Raja Nurul Hidayah Raja Ismail
IIUM
2016
40. Modification of austenitis cast iron (ni-‐resist) with higher manganese content by using heat treatment
Khairul Muzafar bin Ahmad
UMP 2017
41. Feasibility of implant manufacturing using 3D printing and silicone molding
Siti Norsyahirah Abul Razak USM 2017
42. Influence of low concentration diamond water nanofluid on heat transfer in loop heat pipe
Tan Siew Aun USM 2017
43. Failure mode and effects analysis based integrated framework to improve operational performance in advanced manufacturing environment
Liew Chen Fung UTAR 2019
e. Examination Committee of PhD Universiti Putra Malaysia
No Name Category Year 1. Munerah A.B.S.Faraj Chairman 2019 2. Zuliana binti Ismail Chairman 2019 3. Amir Parnianifard Chairman 2019 4. Tan Kai Jin Chairman 2018 5. Farah Kamil Abid Muslim Chairman 2017 6. Mohammed Idris Mohammed Chairman 2017 7. Ali Alimoradi Chairman 2016 8. Aidin Delgoshaei Chairman 2016 9. Chng Ming Hui Chairman 2016 10. Zohreh Molamohamadi Chairman 2015 11. Afsaneh Nouri Houshyar Chairman 2015
Page 72/80
12. Navid Mortezaei Chairman 2015 13. Seyed Jafar Golestaneh Chairman 2014 14. Reza Shahrjerdi Chairman 2014 15. Ang Chun Kit Chairman 2014 16. Marjan Bahrami Nasab Chairman 2014 17. Salwani Mohd Salleh Chairman 2013 18. Ahmad Baharuddin Abdullah Chairman 2013 19. Yousuf Ali Gumaan El-Shekeil Chairman 2012 20. Solehuddin bin Shuib Chairman 2012 21. Dandi Bachtiar Chairman 2012 22. Shahram Ariafar Chairman 2012 23. Karmegam a/l Karuppiah Chairman 2012 24. Maryam Hamedi Chairman 2012 25. Mohammad Anisseh Chairman 2012 26. Hadi Mohammadi Bidhand Chairman 2011 27. Januar Parlaungan Siregar Chairman 2011 28. Riza Wirawan Chairman 2011 29. Puvanasvaran a/l A. Perumal Chairman 2009 30. Edi Syams bin Zainudin Chairman 2009 31. Majed Gh Alshammar Member 2019 32. Bader M.S.M. Aladwani Member 2019 33. Abdul Azim Abdul Rahman Member 2019 34. Bernard Maxmillan Sim Member 2019 35. Andy Al-Affendi Abdullah Member 2018 36. Nor Aiman Sakundar Member 2018 37. Rosdi Mohammad Member 2018 38. Firous Fadaeifard Member 2017 39. Ng Tan Ching Member 2016 40. Morteza Ghobakhloo Member 2015 41. Rosli Darmawan Member 2015 42. Zahra Firoozi Member 2015 43. Seyed Mahdi Homayouni Member 2015 44. Seyed Hamidreza Sadeghian Member 2015 45. Umar Ali Umar Member 2015 46. Abdolhossein Sadrnia Member 2014 47. Weria Khaksar Member 2013 48. Mohamad Ridzwan Ishak Member 2012 49. Omar Suliman Zaroog Member 2011 50. Omid Ghahraei Member 2011 51. Mohammad Abolshah Member 2011 52. Zulkifle Leman Member 2010 53. Abdalla F. Hamed Member 2009 54. Haslina Arshad Member 2008 55. Ahmed Ali Ahmed Qitoon Ai-Shahri Member 2009 56. Mehdi Bayat Member 2009 57. Hayder M.A.Ali Al-Assadi Member 2008 58. Haslina binti Arshad Member 2008 59. Faris Tarlochan@Rameshjit Singh Member 2007
Examination Committee of MS Universiti Putra Malaysia
Page 73/80
No Name Category Year 1. Abu Hatim Ibrahim Chairman 2013 2. Saeed Jabalamelian Chairman 2012 3. Mohammadmehdi Shahzamanian Sichani Chairman 2011 4. Amir Davish Hosseini Chairman 2010 5. Faezah Jasman Chairman 2009 6. Maznah Iliyas Ahmad Chairman 2009 7. Alysius D’cruz a/l Joachin Decruz Chairman 2009 8. Yap Ai KIn Chairman 2009 9. Mahmood Reza Khabbazi Chairman 2009 10. Mohd Zuhri Mohamed Yusoff Chairman 2009 11. Mohammad Hayasi Chairman 2008 12. Shamini a/p Patpanavan Chairman 2008 13. Alireza Esfandyari Chairman 2008 14. Majid Davoodi Makinejad Chairman 2007 15. Abolfazi Golshan Member 2014 16. Mesyam Toozandehjani Member 2014 17. Majid Moayedfar Member 2013 18. Mohamad Maaroff Baharudin Member 2013 19. Nurhaiza Shahrir Member 2013 20. Erialdi Syahrial Member 2012 21. Mohd Solah Deraman Member 2012 22. Shaik Mohamed Mohamed Member 2009 23. Khairul Azmi Md Rezali Member 2009 24. Syed Abdul Hakim Syed Majid Member 2008 25. Norhisham Seyajah Member 2008 26. Suraini bt Mat Jusoh Member 2007 27. Zulkifli Member 2007 28. Hidayatullah Hj Husein Member 2005
f. Accreditation exercise under MQA
No Institution Level Year Designation
1. UTeM Master of Mech. Eng. PA10825
May 2018 Chairman
2. Linton Univ. College Bac. Sc. (Hons) Mech. Eng FA0410 -‐ Extra
March 2018
Chairman
3. UniKL Master of Eng Tech. (Manufac.) Pematuhan
Sept 2018 Chairman
4. UMP Master of Industrial Engineering FA5041
March 2017
Chairman
5. Heriot-‐ Watt University Malaysia
Bac. Eng (Mech Eng) FA4095
March 2017
Panel
6. UMP M Mech Eng PA1980
Feb 2017 Panel Member
Page 74/80
7. Linton Univ. College Bac. Sc. (Hons) Mech. Eng FA0410
Aug 2018 Chairman
8. Kolej Universiti TATI B. Manufac. Eng Tech (Tooling) A8985
Nov 2016 Chairman
9. KDU College Penang Campus
B.Eng (Hons) Mech. Eng FA4957
Aug 2016 Panel
10. UTeM Master of Mech. Eng (Applied Mechanics) FA1457
Jun 2016 Chairman
11. UniKL Bac. Eng Tech (Hons) Tool and Die A10135
July 2016 Chairman
12. UniKL Bac. Eng. Tech (Hons) Product Design A10835
July 2016 Chairman
13. UniKL Bac. Eng. Tech (Hons) Industrial Design A8782
Aug 2016 Chairman
14. UniKL Bac. Eng Tech. (Hons) Manufacturing System A8783
Aug 2016 Chairman
15. UniKL Bac. Eng Tech. (Hons) Business Management FA0919
Aug 2016 Chairman
16. UTeM Master of Mech. Eng (Energy Eng) FA1498
Jun 2016 Chairman
17. City Univ. College of Science and Technology
Bac. Of Engineering Management (Hons) PA0453
Nov 2015 Chairman
18. UMP Master of Industrial Engineering PA5041
June 2014 Panel
19. KDU College Penang Campus
B.Eng (Hons) Mech Eng. PA4957 Nov 2014 Panel
20. Lincoln Univ. College Bac. Of Tech. in Mech. Eng PA4387
Dec 2013 Chairman
21. GMI-‐ UMP Bac. Of Eng. Tech (Manufacturing) PA2290
May 2013 Chairman
22. KOLEJ ANTARABANGSA TEKNOLOGI & PROFESIONAL
Dip. Tech. Mechanical (Gas) PA April 2013 Chairman Panel
23. UNITEN MS Mechanical Eng. PA9733 April 2013 Panel
24. UTHM MS Manuf. Eng PA3097 Dec 2012 Panel
25. UNISZA B. Manuf. Tech (Prod. Design) PA3118
Dec 2012 Panel
26. UNIMAP B. Mech Eng PA2969 Dec 2012 Chairman Panel
Page 75/80
27. UNIKL M.Eng Tech (Manuf.) A8065 Sept 2012 Chairman Panel
28. UMP M Mech Eng PA1980 Apr 2012 Panel Member
29. TATI B Manuf. Eng. Tech (Prod. Management PA2033
Apr 2012 Panel Member
30. UTeM MS Mech. Eng (Energy Eng) PA1498
Dec 2011 Chairman
31. UTeM MS Mech. Eng (Energy) PA1495
Dec 2011 Chairman
32. UTeM M Mech. Eng (Product Design) Nov 2011 Panel Member
33. UTP MS Mech. Eng A8048 PhD Mech Eng A8419
July 2011 Chairman
34. TATI B Manuf. Eng. Tech (Tooling) A8985
Jun 2011 Chairman
35. IPROM UNIKL BEngTech Manuf. System A8783 May 2011 Chairman
36. UTeM BTech Manuf. Eng (Product Design) PA0701
May 2011 Panel Member
37. UTeM BTech Manuf. Eng (Process and Tech) PA0700
May 2011 Panel Member
38. IPROM UNIKL BEngTech Tool and Die A10135 Feb 2011 Chairman
39. UTHM BTech Mech. Eng (Manuf) PA0714 April 2011 Panel Member
40. UC Linton BEng Mech. Eng. PA0410 March 2011
Panel Member
41. UNIMAP MS Manuf. System Eng PA0513 Feb 2011 Panel Member
42. City UC of Science and Tech
BEng Management PA0453 Feb. 2011 Panel Member
43. IPROM UNIKL BEngTech Prod. Design A10835 Feb 2011 Chairman
44. MMU MEng. Advanced Manuf. Eng A5835
April 2010 Chairman
Page 76/80
45. UC SEGI Subang Jaya BEng Mech Eng collaboration with Univ. of Sunderland A7814
April 2010 Chairman
46. UC SEGI Damansara BEng Mech Eng collaboration with Univ. of Sunderland A7451
July 2010
Chairman
47. UNIMAP BEng (Manuf. Eng) AA0361 BEng (Mech. Eng) AA0365 BEng (Prod. Design) AA0364
May 2010 Panel Member
48. UNIMAP BEng (Metallurgical Eng) AA0363 BEng (Materials Eng) AA0362
May 2010 Chairman
49. Univ. of Nottingham in Malaysia (UNIM)
BEng (Mech Eng) A10469 May 2009 Panel Member
50. UNIKL-‐MFI BEngTech Mechatronics KR10026 March 2009
Panel Member
51. KLIUC Dip. Mech. Eng A5270 Nov. 2009 Chairman
52. UNITEN MS Mech Eng KA9733 Nov 2008 Panel Member
53. College of WIT HND Mech Eng A3197 Jun2008 Chairman
54. OUM Dip. Mech Eng. A5716 August 2008
Panel Member
55. OUM Bac. Manuf. Management KA9206 Jun2008 Panel Member
56. International UC INTI UK Degree Transfer Programme – Mech Eng A8338
April 2008 Panel Member
57. Int. UC Tech Twintech M. Mech and Manuf. Eng KA8018 Feb 2007 Panel Member
58. WIT College Dip. Mech Eng. A3037 HND Mech Eng A3197
July 2007 Panel Member
59. UTP PhD Mech Eng KA8419 Aug 2007 Panel Member
60. UniKL-‐MSI BTech Mech. Eng (Automotive) KA8201
June 2007 Panel Member
Page 77/80
61. KLIUC BTech Applied Automotive KA8381
July 2007 Panel Member
62. UNITEN MS Mech Eng. KR8589 Aug 2007 Panel Member
63. UNIKL-‐ Kampus Kota BEng Tech Manuf. System KA8783 Oct 2007 Chairman
64. UNITEN MS Mech. Eng A1186 April 2006 Panel Member
65. SEGI College Subang Jaya B.Eng Mech. Eng. KA7451 June 2006 Panel Member
66. UniKL-‐ MFI Dip. Tech Welding Eng. A1481 May 2006 Chairman
67. PSDC Dip. Mech/Mechatronics Eng. KA5716
Sept 2005 Panel Member
68. Ins. Teknologi Kulim Dip. Design Eng. (Mekanikal) March 2004
Panel Member
69. WIT College Dip. Mech Eng SM3037 May 2004 Panel Member
70. GMI Dip. Prod. Tech KA5787 Dec 2004 Panel Member
71. UniKL -‐ MFI Dip Eng Tech (Welding) KN5139) May 2004 Panel Member
72. TPM Academy BS (Eng) Aug 2004 Panel Member
73. UNITEN PhD in Engineering 2002 Panel
74. Kolej Tafe Seremban Dip. Electro-‐Mechanical Eng 2002 Panel
75. Inst Teknology Jaya/Univ. of Wales College Newport
B.Eng (Hons) Integrated Manufacturing Tech
2002 Panel
76. L&G Twintech Ins. Of Technology
Dip. Mechanical Eng 2000 Panel
Page 78/80
g. Professional Affiliation
No Detail
Designation Duration
1. Board of Engineers Malaysia (BEM) Registered Engineer 13986 Since 1989 2. American Society of Mechanical
Engineers (ASME) Member Since 2001
3. American Foundry Society (AFS) Member Since 2016 4. Int. Association of Advanced
Materials (IAAM) Member Since 2016
5. The Institution of Engineers (IEM) Graduate Member M15210 Since 1992 6. New York Academy of Science Member Since 2001 7. Persatuan Pegawai Akademik Member 1995-‐Present 8. Malaysian Society for Engineering
and Technology (MySET) Member (01586) Since 2017
h. Public Services
No.
Organisation
Date
1 Chairman Rukun Tetangga Taman Desa Serdang
1998-‐2005
2 Committee member od Masjid Al-‐Takwa Taman Desa Serdang
2002-‐2010
3 Deputy Chairman PIBG SAM Bt 10 Cheras
2009-‐2013
4 Chairman PIBG SMISTA MAIWP
2013-‐2017
5 Board Committee Member Islamic Schools Kuala Lumpur and Labuan MAIWP
2013-‐2017
6 Exco member Persekutuan Gasing Malaysia
2013-‐2019
I. Student Activities (Selected) There were many activities held and conducted in the capacity as the Deputy Dean of Faculty of Engineering, Deputy Dean of School of Graduate Studies, Deputy Director, Head of Department, Coordinator and Lecturer. Some are listed as follows:
No Type Position Year 1 Shell Ecomarathon Mechanical Advisor 2012 2 Eimarace 2010 Mechanical Advisor 2011 3 Eimarce 2009 Mechanical Advisor 2010 4 Formula Varsity Mechanical Advisor 2009 5 Robocon 2008 Mechanical Advisor 2008 6 Robocon 2007 Mechanical Advisor 2008 7 BE (Mechanical and Manufacturing) Academic Advisor 1992 – to date
J. Referee
Page 79/80
Prof. Ir. Dr. Sapuan bin Salit Department of Mechanical and Manufacturing Engineering Faculty of Engineering UPM [email protected] Prof. Datin Dr. Napsiah Ismail Department of Mechanical and Manufacturing Engineering Faculty of Engineering [email protected] Prof. Ir. Dr. Desa Ahmad Department of Biological and Agricultural Engineering Faculty of Engineering UPM [email protected]
Page 80/80
DECLARATION I hereby certify that the information above is true.
Signature: ______________________________________
PROF. DR. SHAMSUDDIN SULAIMAN Official Stamp:
Date: 14/11/2019