Embed Size (px)
Citation preview
1 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
PROFESSOR ABID HALEEM CONTACT INFORMATION
Mobile: +91-9818501633
Phone No.: +91-11-26924703 (Res)
E-mail: [email protected]
ACADEMIC CREDENTIALS
Doctor of Philosophy: Indian Institute of Technology, Delhi (IITD), 1996
M. Sc. Engg. (Industrial): Aligarh Muslim University, 1987 (Gold medal)
B. Sc. Engg. (Mechanical): Aligarh Muslim University, 1985 (Hons)
AREAS OF INTEREST
• Production Engineering • Systems Modeling
• Industrial Engineering • Supply Chain Management
• Engineering Economy • Green Practices andSupply
• Operations Management Chain • Operations Research
• Technology Management • E-Governance
• Creative Problem Solving • Business Process Re-engineering
• Innovation Management • Halal supply chain
• Rapid prototyping • Smart cities
MAJOR RESEARCH GRANT RECEIVED
DST-FIST of Rupees 132 lac for Mechanical Engineering, 2013-17
Principal Investigator, DST Project on Technology Forecasting and Technology
Assessment, of Rupees16 lac in 2011-13.
MODROBS project on “Modernization of Fluid Mechanics Laboratory, 15 lac rupees,
2012-13.
UGC, grant of Rupees 20 lac for DRS of Mechanical Engineering, 2012-13
MODROBS project on “Modernization of Industrial Engineering Laboratory, of
Rupees 10 lac 2000.
MAJOR PROJECT WORK UNDERTAKEN
International Industry / Academic Project
Performed project on “SMC Dialog Plus of Allen Bradley”, at Milwaukee School of
Engineering, Milwaukee, Wisconsin, USA. Project sponsored by Rockwell Automation,
USA. A teamwork with researchers and professors from 13 countries from 2nd
July to
14th
August’ 2001
2 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
Worked for Department for International Funding, for “Organizational Review of
Government of India Press of Orissa”, 2003
Green Practices, Joint research, teaching programmes and international activities
collaboration with the School of Built Environment at the University of Salford. (U.K),
2007-2009
Indian Industry / Academic Project
Worked with Ministry of Human Resource Development for providing detailed project
report for the establishment of School of Engineering and Technology, Aizwal, 2006
Cost cutting of sound enclosure through Value Engineering approach at ‘Jupiter No
Brake Systems’, Okhla, New Delhi in 2001
Prepared report on ‘Project Management System’ for Jamia Millia Islamia’s Construction
Projects
Developed project report on establishment of a Business School and Engineering
Institution
MAJOR PROFESSIONAL ACTIVITIES
Director (Honorary), Global School of Environmental Management 2016 onwards
Vice President (Northern India), Academy for Global Business Advancement, 2014 till
date
Editor (Asia Pacific) Global Journal of Flexible Systems Management (giftjourn@l),
(Springer) SCOPUS indexed international journal catering to the area of Flexibility,
published since 1999.
Advisor, DTDC Institute of Supply Chain Management, from 2011 till date
Member, Faculty Board, School of Management, IGNOU, New Delhi, since April
2015
Governing Council member, Society of Construction law (SCL), Delhi Chapter, from
2015 till date
Founder Director (Honorary), Internal Quality Assurance Cell of Jamia Millia
Islamia, New Delhi-110025, since 2010- to Nov 2015
President, Global Institute of Flexible Systems Management (GIFT), New Delhi, since
Aug 2014 to Aug 2015
President Elect, Global Institute of Flexible Systems Management (GIFT), New Delhi,
since Aug 2013 to Aug, 2014
Member Ad-hoc Task Force, Performance Management Group, Cabinet
Secretariat, Result Framework Document, infrastructure Development, fromr 2012 to
2015
Independent Director, Telecom Consultants of India limited, (A Govt. of India
Enterprise) from July, 2008 to July 2011
Expert in Review of functioning of Public sector undertakings by Ministry of Industry,
Government of India. 2007 and 2008
Consultant to Educational Consultants of India (EdCIL), Department for International
Development (DFID), Government of Orissa
Member, Governing Council, Global Institute of Flexible Systems Management (GIFT)
Involved in publication of “Global journal of Flexible Systems management and
organizing International Conferences, National events, Seminar series, conferences etc.
3 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
on the theme and allied areas of Flexibility.
Founder Member, Global Institute of Flexible Systems Management (GIFT), New
Delhi
Life Member, Indian Society of Mechanical Engineering.
Life Member, Indian Islamic Cultural Center, New Delhi.
Life Member, Indian Society for Technical Education
Life Member, Indian Institute of Industrial Engineering
Member Society of Construction Law
Secretary, GIFT School of Learning Organization and Strategic Transformation, New
Delhi, August 2003 to 2005.
Director, Global School of Technology Management and Innovation 2007 to 2010
Secretary, ISTE Jamia Chapter, New Delhi, 2004-2006
AWARDS
Fellow of AGBA, 2014, awarded the Fellowship of Academy for Global Business
Advancement, the highest award on 21, Nov 2014 at IITD, India
Best paper award “Computer Information Systems-Firm Performance Following IT
Outsourcing Decisions”, 53rd
, Annual National Mountain Plains Management
Conference Colorado Mesa University, Colorado, USA 2012
Represented India, selected for representing India at Global Development Program
2001, at M S O E, Wisconsin, USA. 2001
Awarded Gold Medal for securing highest marks & first position in M. Sc. Engineering,
in the year 1987, AMU, Aligarh, India
4 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
RESEARCH SUPERVISION
Ph. D Supervised and Awarded
Thesis Title Name of the Candidate
Role of Information Technology in Business
Transformation
Prof. Vijay Agrawal
E-Governance in India Dr. Ram Lal
Assessment and Evaluation of Economic Impact on
India due to use of Alternative Refrigerants
Prof. M N Karimi
Assessment and Evaluation of Technology
Absorption and Innovation in Indian Small and
Medium Enterprises (SMEs)
Dr. Farhad Khan
Management of Thermal Power Plant Performance
Parameters
Prof. K C Yadav
Bull whip effect in Supply Chain Management Prof. Sanjay Kumar
Green Supply Chain Practices in India Prof. Asim Qadri
Effects of Information Technology Outsourcing on
Firms’ Performance and Value: An Empirical Study
Prof. Pushpa Agrawal
An empirical study of adoption, implementation and
usage of Enterprise Systems in Indian context
Dr. Naim Ahmad
Freight Transport – Improving Supply Chain through
Integrated Transport Planning
Dr. Pradeep Kumar
Analysis and Modeling of Flexible Manufacturing
Systems
Prof. Ravindra Kumar
Optimal Design of a Production System Prof. Pawan Arora
Flexible Systems in the TQM Context: Role of
Computer Simulation.
Dr. Fauzai Siddiqui
Exergy Analysis and Utilization of Wet Ethanol in
HCCl engine for Cogeneration and Trigeneration
Applications.
Dr. S K Trivedi
Perspective Management Systems Standards and
Service Chain–Effectiveness & improvements
Dr. Javed Khan
Green Practices: A Comparative Study Dr. Mohammad Asif
Kamal Khan
Study, Analysis and Evaluation of Critical Success
Factors of Green Supply Chain Performance
Dr. Sunil Luthra
Role of Technology Management in Green Practices:
Indian perspective
Dr. Javed Khan
5 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
Ph. D under Supervision
A study on Innovation Management Practice in Indian SME
Development of an Innovativeness Index for Indian Manufacturing Industry
Computational and Experimental analysis of parts in three dimensional printing
Product design and development using additive manufacturing
Product design and development using rapid prototyping technology
Development of composite index assessing innovation of firms in Indian manufacturing
industry
Implementing IT –enabled supply chain management –A study of Indian Consumer
Packaged Goods sector.
Assessment and measurement of performance parameter of Halal supply chain
A Study of Practices for Integration of Sustainability with Innovation for Micro, Small &
Medium Scale Manufacturing Enterprises: An Indian Perspective
Postgraduate dissertation supervised
More than fifty-five major projects of M.B.A/ M. Tech. and other master courses have been
guided in the areas of Operations Management, Business Process Re-engineering, Quality,
Technology Management, Project Management, Strategic Management, Demand Forecasting,
Green Practices, Innovation management, Halal supply chain
Graduate dissertation supervised
More than fifty major projects guided at B. Tech. and B.E. level in the areas of Production and
Industrial Engineering, System Dynamics, Business Process Re-engineering, Quality
Management, Total Quality Management, Quality Control, Enterprise Resource Planning,
Technology Management, Supply Chain Management, Total Productive Maintenance,
Production Engineering, Value Engineering, World Class Manufacturing, Green Practices,
Project Management, various areas of Operations Management.
6 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
RESEARCH CONTRIBUTION:
Book Published / Edited’
“Handbook of Materials Management”, (2016) published by Prentice Hall of India Ltd.,
New Delhi, India
“Advances in Global Business Research”, (2014), Proceedings of the 11th Annual
World Congress of the Academy for Global Business Advancement (AGBA)
(www.agba.us) ISSN 1549-9332
“Innovation, Flexibility and Technology Transfer”, (2004) published by Tata McGraw
Hill Publishing Co Ltd, New Delhi, India
“Industrial Engineering and Operations Research Module on Industrial Engineering,
Work System Design and Product Design and Development”, (2008) Indira Gandhi
National Open University, Course Material BME035, New Delhi, India
Contribution in the Book writing
“Emerging Trends in Technology Management”, (2006) Singhal, Basu & Srivastava
published by GIFT Publishing, New Delhi
”Globalization, Flexibility and Competitiveness: A Technology Management
Perspective”, (2001) Kiran Momaya and Sushil
“Technology Management in the Indian Steel Industry: A Case Study of SAIL“, (2003)
published by Vikas Publishing House, 291-284, New Delhi
“System Dynamics for Managers”, (1996), Sushil, published by Wiley Eastern Ltd, New
Delhi
RESEARCH PAPERS AND ARTICLES PUBLISHED
“Critical factors for the successful usage of fly ash in roads & bridges and embankments:
Analyzing Indian perspective” Resources Policy, 49, 334-348 (2016)
“The impacts of critical success factors for implementing green supply chain management
towards sustainability: an empirical investigation of Indian automobile industry” Journal of
Cleaner Production, 121,142-158 (2016)
“Evaluation of factors important to enhance productivity” Cogent Engineering, 3(1), (2016)
“An Evaluation of Barriers to Implement Reverse Logistics: A Case Study of Indian
Fastener Industry” 10 (8), 1375-1380, (2016)
“Barriers in green lean six sigma product development process: an ISM approach” 27, 604-
620, (2016)
“Critical Factors Important for Effective Industry-Institute Interactions (III): An Indian
Perspective”, International Journal of the Analytic Hierarchy Process ,8 (1), (2016)
“Modeling of critical factors for integrating sustainability with innovation for Indian small-
and medium-scale manufacturing enterprises: An ISM and MICMAC approach” Cogent
7 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
Business & Management, 3(1),1-15, (2016)
“Thermodynamic analysis and utilisation of wet ethanol in homogeneous charge
compression ignition engine” International Journal of Sustainable Energy, 35(1), 33-46,
(2016)
“Geographical Spread of Fly Ash Generation and Residual Potential for Its Utilization in
India” International Journal of Innovative Research and Review, 4(1), 8-19, (2016)
Selection of Rapid Prototyping Technology Using an ANP Based Approach, IOSR Journal
of Mechanical and Civil Engineering (IOSR-JMCE), 13(4), 71-78, (2016)
“Understanding “Halal” and “Halal Certification & Accreditation System”- A Brief
Review”, Saudi Journal of Business and Management Studies, 1(1), 32-42, (2016)
“Development of water consumption benchmark for five star hotels using Delphi’s
technique”, Water Utility Journal, 13, 47-56, (2016)
“Design of production System Using Simulating Annealing Techniques”, Productivity”
56,4, 362-367, (2016)
“Rapid Prototyping Technology for New Product Development”, International Journal of
Innovative Science, Engineering & Technology, 3, 1, 287-292, (2016)
“Optimal Design of a Production System”, CAD/CAM, Robotics and Factories of the
Future, 697-703, Springer India, (2016)
“Benchmarking using an index for bullwhip effect mitigation”, Uncertain Supply Chain
Management, 4(2), 161-170, (2016)
“Identification and evaluation of critical factors to technology transfer using AHP
approach”, International Strategic Management Review, 3(1), 24-42, (2016)
“Barriers to renewable/sustainable energy technologies adoption: Indian perspective”,
Renewable and Sustainable Energy Reviews 41,, 762-776, (2015)
“An analysis of interactions among critical success factors to implement green supply chain
management towards sustainability: An Indian perspective”, Resources Policy, (2015)
“Benchmarking supply chains by analyzing technology transfer critical barriers using AHP
approach” Benchmarking: An International Journal 22 (4), 538-558,(2015)
“Hurdles in Implementing Sustainable Supply Chain Management: An Analysis of Indian
Automobile Sector”, Procedia-Social and Behavioral Sciences 189, 175-183(2015)
“Conceptualisation of Sustainable Green Lean Six Sigma: an empirical analysis”,
International Journal of Business Excellence 8 (2), 210-250(2015)
8 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Mining of Factors to Enhance Productivity in Manufacturing Sector”, Data Mining and
Knowledge Engineering 7 (3), 128-130(2015)
“ Study of reasons for enterprise systems adoption among Indian organizations”, Journal of
Enterprise Information Management, Vol. 27 (2014)
“ Design of a Production System Using Genetic Algorithm, Procedia Technology”, (2014),
390-39
“ Critical success factors of green supply chain management for achieving sustainability in
Indian automobile industry”, Production Planning & Control, (2014) pp:1-24
“ Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile
Industry”, Journal of The Institution of Engineers (India): Series C Vol.95 (2014), pp:119-
126
“ Technology transfer: enablers and barriers-a review”, International Journal of Technology,
Policy and Management 14 (2014), pp:133-159
“Green Supply Chain Management: Implementation and Performance-A Literature Review
and Some Issues”, Journal of Advances in Management Research Vol.11 (2014), pp:20-46
“Design of a Production System Using Genetic Algorithm”, Procedia Technology Vol.
14(2014), pp: 390-396
“Identification of critical success factors to achieve high green supply chain management
performances in Indian automobile industry”, International Journal of Logistics Systems and
Management Vol.18 (2014), pp: 170-199
“A framework for comparative evaluation of lean performance of firms using fuzzy
TOPSIS”, International Journal of Productivity and Quality Management, Vol. 11(2013) pp:
371-392
“Customer involvement in greening the supply chain: an interpretive structural modeling
methodology”, International Journal of Industrial Engineering, Vol.9 (2013), pp: 1-13
“Identifying and ranking of strategies to implement green supply chain management in
Indian manufacturing industry using Analytical Hierarchy Process”, Journal of Industrial
Engineering and Management Vol. 6 (2013) pp: 930-962
“Thermodynamic analysis and utilization of wet ethanol in homogeneous charge
compression ignition engine”, International Journal of Sustainable Energy (2013) pp: 1-14
“Recent development of cellular manufacturing systems”, Sadhana, Vol. 38 (2013) pp: 421-
428
“Proposed Model for Optimizing Production System Using CMS”, Applied Mechanics and
Materials Vol.281 (2013), pp: 673-676
9 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Implementing lean manufacturing system: ISM approach”, Journal of Industrial
Engineering and Management, Vol.6 (2013) pp: 996-1012
“Optimization of Cellular Manufacturing Systems Using Genetic Algorithm: A
Review” Advanced Materials Research, Vols. 622-623 (2013) pp: 60-63
“Barriers in Technology Transfer: A Brief”, International Journal of Research in Information
Technology, Vol. 1 (2013) pp: 230-235
“Technology Forecasting: Indian Perspective”, Special Issue of International Journal of
Sustainable Development and Green Economics, Vol.2 (2013) pp: 6-10
“Analysis of Enablers to Implement Green Supply Chain Management of Indian Automobile
Industry”, UDYOG PRAGATI-The Journal for Practicing Managers, Vol.37 (2013) pp: 37-
44
“Analysis of critical success factors of world-class manufacturing practices: an application
of interpretative structural modelling and interpretative ranking process”, Production
Planning & Control, Vol.23 (2012) pp: 722-734
“Customer orientation in e-Government project management: a case study”,Case Studies in
E- Government, Case Studies in E-Government Vol.1 (2012)
“Compilation of Critical Success Factors in Implementation of Enterprise Systems: A
Study on Indian Organizations”, Global Journal of Flexible Systems Management, Vol.13
(2012) pp: 217-232
“Strategic Planning of Service supply chain using Dynamic SAP-LAP Model: A case study
of a leading gas organization in India”, International Journal of Services, Economics and
Management, Vol.4 (2012), pp: 169-185
“Analysis of cogeneration based wet ethanol operated HCCI engine using first and second
law of thermodynamics”, International Journal of Engineering Science and Technology,
Vol. 4(2012) pp: .1267-1280
“Green drivers and green purchasing practices: an Indian perspective”, published and
presented in the proceeding of 12th
annual International Business Research Conference,
University of North Florida - University of Warsaw, 9-10 February 2012
“Barriers to green supply chain management practices: a literature review” published in the
proceeding of International conference on Manufacturing Excellence MANFEX-2012 at
Amity University Uttar Pradesh, Sector 125, Noida during 29-30 March 2012
“Evaluating impact of ethanol fuelled engine on CO2 emissions and exergy destruction
assessment of wet ethanol operated HCCI engine”, Presented and published in the
International Conference on Energy Security, Global Warming and Sustainable Climate
(SOLARIS-2012) at BHU, Varanasi held on February 07-09, 2012
“Thermodynamic Analysis and Evaluation of Exergy Destruction of Wet Ethanol Operated
10 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
HCCI Engine for Cogeneration Application”, Presented and published in the National
Conference on Advances in Mechanical Engineering and Emerging Technologies
(AMEET-2012 ) at KNIT, Sultanpur to be held on April 07-08, 2012
“Green Drivers and Green Purchasing Practices: an Indian Perspective”, accepted at The
Twelfth Annual International Business Research Conference, 2012, at The University of
North Florida, USA
“Barriers to implement green supply chain management in automobile industry using
interpretive structural modeling technique-An Indian perspective”. Journal of Industrial
Engineering and Management, Vol. 4(2011), pp: 231-257
“Risk effect of IT Outsourcing on Firm Performance and value”, International Journal of
Management and Information Systems, Vol.16 (2011) pp: 55-58
“Supply chain management practices Framework in Total Quality management practices
and Flexible system practices Context: An Empirical Study in oil and gas industry”, Global
journal of enterprise information systems Vo.3 (2011) pp: 30-35
“Cell Formation Techniques-A Study”, International Journal of Engineering Science &
Technology, Vol.3 (2011), pp-1178-1181
“Comparative Study of Heuristic Approaches for cell formation”, International Journal of
Engineering Science & Technology, Vol. 3(2011), pp-1182-1188
“Identification of drivers for greening of supply chain in India”, International Journal of
Construction Project Management, Special issue on sustainability and research agenda for
the future, Vol. 3, No. 3, (2011) pp: 1-17
“Performance Optimization of an Imbalanced Flexible Manufacturing System Using
Taguchi Approach”. Global Journal of Flexible Systems Management, Vol. 12(2011), pp.
81-89
“Identification of Green Purchasing Practices – A Survey of Indian Manufacturing
Industry”, published in the proceeding of National conference on Manufacturing
Excellence MANFEX-2011 at Amity University, Uttar Pradesh, Sector 125, Noida during
3-4 March 2011
“Engineering Mechanics” AICTE sponsored Staff Development Programme in the subject
as resource person from 18 to 28 Jan 2011 organized by Department of Mechanical
Engineering, Skyline Institute of Engineering & Technology, Greater Noida
“Design, Modeling & Simulation” the three days (24-26 June, 2011) Software Training
Workshop on organized by SAE India in collaboration with Galgotias college of
engineering and technology, Greater Noida
“Recent Development in Cellular Systems”, A Review, Proceedings of 2nd
International
Conference on Production and Industrial Engineering CPIE-2010, 03-05 December, 2010,
National Institute of Technology Jalandhar (INDIA)
11 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Outsourcing and Firm’s Performance”, Annual 2010 National DSI meeting in San Diego,
CA, USA November 20-23, 2010
“Enablers and Disablers to Green Supply Chain in India”, published and presented in the
proceeding of National conference on recent development in Mechanical
engineering(NCRDME), October 29-30, 2010 at Laxmi Devi institute of engineering and
technology, Alwar, Rajasthan, India
“Optimal design of a cellular manufacturing system”, a Review, Proceedings of
International conference on Research and Development in Mechanical Industry – 2010,
September 16-19, 2010, Donji Milanovac, Serbia (Accepted and published as Invited
Paper)
“Design of a Cellular Manufacturing System”, Proceedings of National conference on
Mechanical Engineering Emerging Trends, August 6-7, 2010, Vardman College of
Engineering, Shamshabad, Hyderabad
“Environment and Organizational Design”, Proceedings of Annual 2010 Midwest DSI
Meeting in Toledo, Ohio, April 22-24, 2010
“Suggested implementation of the green supply chain management in automobile industry
of India: A review. Proceedings of National Conference on
‘Advancements and Futuristic Trends of Mechanical and Industrial Engineering” GITM,
Bilaspur (India), 12-13 Nov., 2010
“Enablers and Disablers to Green Supply Chain in India”, published and presented in the
proceeding of National conference on recent development in Mechanical
engineering(NCRDME), October 29-30, 2010 at Laxmi Devi institute of engineering and
technology, Alwar, Rajasthan, India
“Design of a Cellular Manufacturing System”, Proceedings of National conference on
Mechanical Engineering Emerging Trends, August 6-7, 2010, Vardman College of
Engineering, Shamshabad, Hyderabad
“Recent Development in Cellular Systems: A Review, Proceedings of 2nd International
Conference on Production and Industrial Engineering CPIE”, 03-05 December, 2010,
National Institute of Technology Jalandhar (INDIA)
“Simulation Study of Product Mix and AGV Issues in FMS”. Industrial Engineering
Journal, Vol. I (2010) pp. 14-20
“A Fuzzy Expert System for Illumination-Industrial Worker Performance”, International
Journal of Applied Engineering Research 2 (2010) pp: 63-74
“Green Supply Chain Management Issues: A Literature Review Approach. Journal of
Information, Knowledge and Research in Mechanical Engineering, Vol 1 (2010), pp 12-20
12 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Simulation Study of Product Mix and AGV Issues in FMS”, Industrial Engineering
Journal, Vol. II (2010) pp 14-20
“Role of Supply Chain Management in Context of Total Quality Management in Flexible
Systems: A State-of the-Art Literature Review”, Global Institute of Flexible Systems
Management, Vol. 10, Nos.3, 2009
“Cognitive task Assessment in Steam Turbine Power Plant Station”, Ergonomics for
Improved Productivity, Ed. M Muzammil et al, Excel publishers, (2009) pp:10-16
“A Structural Modeling for E-Governance Service Delivery in Rural India”, International
Journal of Electronic Governance, Inderscience, Volume 2(2009) pp: 3-21
“State of green construction in India: drivers and challenges” Journal of Engineering
Design and Technology”, Vol. 7 (2009)
“Green Construction in India: Gaining a Deeper Understanding”, Journal of Architectural
Engineering © ASCE, Vol. 10, (2009)
“Roll of Supply Chain Management in Context of Total Quality management and Flexible
Systems: A State-of the-art literature review”, Global journal of flexible management
systems, Vol.10, (2009) pp-1-14
“Meeting the Needs of Industry in Green Practices through the Design and Development of
Appropriate Curriculum”, one-day workshop on June 30th, 2009 in Crowne Plaza Hotel,
New Delhi. This workshop has been jointly organized by The School of Built
Environment, University of Salford and Jamia Millia Islamia, New Delhi
“Automated Guided Vehicle Based Material Handling System in FMS”.Proceedings of
National Conference on Advances in Mechanical Engineering (NCAME 2009),
Department of Mechanical Engineering Moradabad Institute of Technology, Moradabad,
pp. 464-472. (2009)
“Understanding Bullwhip Effect: A Literature Review Approach, Invertis Journal of
Science and Technology, Vol. 1(2008) pp 231-240
“Managing Bullwhip Effect Using Systems Approach”, International Journal of Applied
Management and Technology, USA, Vol. 6, (2008)
“Mobile Computing with special reference to readability task under the impact of
Vibration, Colour Combination and Gender”, Journal of Human Ergology, Vol. 37(2008)
pp: 57-66
“Role of Technological and people Capabilities in India: An Empirical Study” Global
Institute of Flexible Systems Management, Vol. 9 (2008) pp: 31-40
“Globalization and Global Sourcing of IS Function”, Eighth Global Conference on Flexible
Systems Management, Theme: Flexible Enterprise for Global Business, June 14-16, 2008.
Stevens Institute of Technology, New Jersey, USA
13 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Implications of Transaction Cost, Resource Based, and Institutional Theories on Vertical
Integration”, Eighth Global Conference on Flexible Systems
Management, Theme: Flexible Enterprise for Global Business, June 14-16, 2008. Stevens
Institute of Technology, New Jersey, USA
“Supply Chain and Beer Game: Statistical Analysis Using Simulated Data”, Eighth Global
Conference on Flexible Systems Management, Theme: Flexible Enterprise for Global
Business, June 14-16, 2008. Stevens Institute of Technology, New Jersey, USA
“Optimum Design of Cellular Manufacturing system”, A Review, National Conference on
“Emerging technologies in Mechanical engineering”, June 2008, KIET, Ghaziabad
“Decision Making Techniques: Application Areas and Limitations, Fourth National
Conference on advancement of technologies, GLAITM, Mathura, February 23-24, 2008
“Bullwhip Effect: A Brief Review”, International Review of Mechanical Engineering,
Praise Worthy Prize, 2008, Vol. 2, No1, pp 20-26.
“Green Supply Chains in infrastructure in India and the U.K.” July 14th, 2008 in Crowne
Plaza Hotel, New Delhi, jointly organized by The School of Built Environment, University
of Salford, U.K. and Jamia Millia Islamia, New Delhi
“Optimum Design of Cellular Manufacturing system: A Review”, Emerging Technologies
in Mechanical engineering, National Conference”, June 2008, KIET, Ghaziabad
“Bullwhip Effect: Effect on Supply Chain Performance”, Proceedings of National
Conference on Emerging Trends in Technology and Management , Feb 18-19, 2007,
GLAITM, Mathura, pp 98-105.
“Modeling Bullwhip Effect and Understanding Role of Information Sharing”,
Flexibility with business Excellence in the Knowledge Economy, 386-398, 2007, GIFT
Publishing, New Delhi,
“E Governance in Rural India: An Empirical Study”, 21-22 June 2007, Seventh European
Conference on E Government, Netherlands.
“Impact of Robotics on Indian Industries”, GLOGIFT 06, B R Ambedkar National Institute
of Technology Jalandhar, (2007), INDIA
“Factors Affecting Plant Location: Analysis using Structured Modeling”, International
Management Conference on Convergence and Competition, March 31, 2007.Punjab
“Vender Selection Using Analytical Hierarchy Process: An Overview of Small Scale,
Medium Scale and Large Scale Industries.” International Management Conference on
Convergence and Competition, March 31, 2007. Punjab College of Technical Education,
Ludhiana, INDIA
14 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Supply Chain Management for Competitive Advantage”, (2007), National
Conference on Advancement of Technologies-Global Scenario, 25-26 February, GLAITM
Mathura
“Effective Information Sharing for Reducing Bullwhip Effect: A Simulation Based Study”,
International Journal of Computer Science and System Analysis, Vol. 1(2007) pp 101-118.
“Ergonomic Evaluation of Data Entry Task Performance under the Influence of Noise and
Task Structure-The Effect of Gender”, International Journal of Mechanical and Material
Engineering Vol. 2(2007) pp: 161-172
“Indian Implementation of Alternative Refrigerant Technology: A Dynamic Analysis”,
Global Journal of Flexible Systems Management, Vol. 8(2007) pp: 39-48
“Effective information Sharing for Reducing Bullwhip Effect: A Simulation Based Study”,
International Journal of Computer Science and System Analysis, Vol. 1,(2007) pp 111-128
“Developing Plant layout: an ISM Analysis”,), GPM Journal of Technology and
Management, Vol. 1(2007) pp 33-39
“Business Dynamics-A Core and Alternative Technologies in Car Air-conditioning
Sector Under Montreal Protocol: An Indian Perspective”, Pranjana: The Journal of
Management Awareness, New Delhi, Vol. 7(2006)
“A Structural Model for E-Governance Delivery in Rural India”, (2007), Refereed
Research Conference on e-government and e-governance in South Asia, June 28-29 2006.
Department of Management, Monash University, Melbourne, Australia
“Bullwhip Effect: Effect on Supply Chain Performance”, National Conference on
Emerging Trends in Technology Management, 25-26 February, 2006, Mathura, UP
“Technology Transfer and Acquisition: A Brief Review”, National Conference on
Emerging Trends in Technology Management, 25-26 February, 2006, Mathura, UP
“ERP: Implementation Status in Indian Small and Medium Enterprises”, Advances in
Mechanical Engineering, AIME- 2006, pp489-499, Ane Books India, New Delhi, India
“Fire Side Erosion Control Techniques for Pulverized Coal Fired Boilers “, Advances in
Mechanical Engineering, AIME- 2006, Ane Books India, New Delhi, India
“New Method Excess Air Estimation for Complete Combustion of Different Coal”, 14th,
ISME International Conference on Mechanical Engineering in Knowledge Age, 12-14 Dec,
2005, page 759-764, Elite Publishing, New Delhi
“Domestic Refrigerator Disposal: A Case Study of Delhi, India”, Proceedings of the
National Conference on Solid and Hazardous Waste Management Problems and Solutions,
Pg 161-165, 28-29 April 2005, International Development Center Foundation, New Delhi
15 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Environmental pressures, Culture, and Factors Contributing in the Usage of Various
Categories of Application Software”, Global Journal of Flexible Systems Management,
Vol. 7 (2005), pp 31-45, New Delhi. India
“Implications of Environmental and Cultural Factors on the Growth in Requirements
of In-house Software Professionals", Indian Journal of Economics and Business, Vol. 4
(2005)
“E-Governance: Identifying Critical Success Factors”, Pranjana: The Journal of
Management Awareness, New Delhi, Vol.8 (2005)
“A Cross-impact Analysis of the External Situation and Culture on Factors of IT-enabled
Business Transformation”, Global Journal of Flexible Systems Management, Vol. 6(2005)
pp 21-34.
“Taguchi Approach of Quality Management System: A Case Study”, Pranjana: The Journal
of Management Awareness, New Delhi, Vol. 7(2004).
“Role of Portal in E-Governance: The Indian Perspective”, Productivity, vol. 44, no 4,
March, National Productivity Council New Delhi, 2004. India
“Implementing Total Quality Management: A Case Study ”, Flexibility in New Product
Development, Business Systems and Knowledge Management, Prime Publication, ISBN:
81-8229-003-1 page 288-299 2004, New Delhi, India
“E Governance: Identifying Critical Success Factors”, International Conference on
Enhancing Global Business Competitiveness, Organized by Integrated Academy of
Management and Technology, Nov 3-5, 2004, New Delhi, India
“Evaluation of Buyer Supplier Relations for Manufacturing and Service Industries in North
India”, Fortune Journal of International Management, Vol. 1, No 1, April Sep 2004, page
97-110, New Delhi
“Indian SME’s and Technology Transfer”, Third Global Conference on Flexible Systems
Management, Faculty of Engg. & Tech. Jamia Millia Islamia, New Delhi-110025. 13-15
March 2004, India
“Effective Management Techniques for Improvement of Condenser Vacuum”, Third
Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia
Millia Islamia, New Delhi-110025. 13-15 March 2004, India
“Selection of Buyer-Supplier Relationship Framework in Supply Chain”, Third Global
Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia Millia
Islamia, New Delhi-110025. 13-15 March 2004, India.
“Prioritization of Factors directly involved in the Effective Selection of Buyer-supplier
Relations”, Third Global Conference on Flexible Systems Management, Faculty of Engg.
& Tech. Jamia Millia Islamia, New Delhi-110025. 13-15 March 2004, India.
16 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Developing and Effective Web Site for E-Governance: The Indian Perspective”,Third
Global Conference on Flexible Systems Management, Faculty of Engg. & Tech. Jamia
Millia Islamia, New Delhi 13-15 March 2004, India.
“Effective Management of Combustion Air to Improve Boiler Efficiency”, (ICEE-SSD)
International Conference on Energy and Environment Strategies for Sustainable
Development, Department of Mechanical Engineering. Faculty of Engg. & Tech. Jamia
Millia Islamia, New Delhi, 23-24 January 2004, India.
“Alternative Options of Refrigerants for Indian Domestic Refrigerator Industries”, (ICEE-
SSD) International Conference on Energy and Environment Strategies for Sustainable
Development, Department of Mechanical- Engg. Faculty of Engg. & Tech. Jamia Millia
Islamia, New Delhi-110025, 23-24 January 2004, India.
“Environmental Sustainability through Active Noise Control: A Review”, (ICEE-SSD)
International Conference on Energy and Environment Strategies for Sustainable
Development, Department of Mechanical- Engg, Faculty of Engg. & Tech., Jamia Millia
Islamia, New Delhi-110025, 23-24 January 2004, India
“Culture, Environmental Pressures, and the Factors for Successful Implementation of
Business Process Engineering and Computer-based Information Systems”, Global Journal
of Flexible Systems Management, Vol. 4, Nos. 1 and 2, pp 27-46, 2003. New Delhi. India.
“Successful Implementation of Business Process Engineering and Computer Based
Information Systems”, Vol. 20#2, National Social Science Journal, (ISSN: 0365-3346),
USA. 2003.
“Digital Divide and Digital Unity in E. -governance: Indian Perspective”, ICEG-2003,
International Conference On E-Governance, Indian Institute of Technology Delhi, New
Delhi. 18-20Th, December 2003, India.
“E-Governance: Issues Involved”, International Conference on Management of Research
and Development, (ICMARD 2003). 10-11th January 2003, IIT Delhi, New Delhi.
“Draught System Management to Minimize the Loss of Life and Efficiency”,
National seminar on Maintenance and Troubleshooting of Boiler Auxiliaries, 20 & 21st
February, 2003 at NPTI Badarpur, Delhi.
“Globalization of Research and Development: Software Sector in India”, (ICMARD
2003) 10-11th January 2003, IIT Delhi, New Delhi.
“The Contribution of Information Technology to Critical Response Activities in Business
Transformations”, National Social Science Journal, Vol. 20, #1, 2003 (ISSN: 0365-3346),
USA.
“E-Government Initiatives and Challenges: An Indian Perspective”, International Seminar
on Business Education in New Millennium, Department of Commerce, Faculty of
Commerce, Aligarh Muslim University, Aligarh, 2-3rd, March, 2003.
17 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
“Information Technology: Growth and Adoption in Rural India”, Information and
Communication Technology for Development. www.developmentgateway.org,
Development Gateway Foundation, USA, 2002
“Role of Information Technology in Business Transformation”, (2002) VISION an
International Journal from MDI Gurgaon, New Delhi
“Technology Management in the Indian Steel Industry: A Case Study of SAIL“,
Globalization, Flexibility and Competitiveness: A Technology Management Perspective,
Published by Vikas Publishing House, 291-284, New Delhi, 2001
“Supply Chain: Some Issues to Increase The Organizational Effectiveness”, Proceedings of
the International Conference on Logistics and Supply Chain Management, PSG College of
Technology, Coimbatore, 116-124, India. 2001
“Job Shop Scheduling”, Institution of Engineers, MACT, Bhopal, India. 2001
“Trends in Demand for Different Categories of Software and Human
Resources”,Proceedings of the Annual Conference of Midwest Decision Sciences Institute.
Madison USA. April 2001
“Generation of Part Program and Profile Cutting on CNC Machines”, Proceedings of the
Indian National Conference on Application of Computers in Engineering and
Communication, College of Engineering Osmanabad, C6: 1-5, March 24-25, 2001
“Role of Information Technology in Supply Chain Management”, Proceedings of the
Indian National Conference on Application of Computers in Engineering and
Communication, College of Engineering Osmanabad, C1:1-6, March 24-25. 2001
“Introduction of CIM in Engineering Colleges Experimental Hurdles”, Proceedings of the
National World Class Manufacturing Conference, WCMS-2000, Bundelkhand Institute of
Engineering and Technology, Jhansi, UP, India. (2000) pp181-185
“Modeling for Waste Management Using Physical System Theory Approach”,
Environment Challenges of the New Millennium, CAD PLAN, New Delhi. (1999) pp: 542-
549
“Towards TQM through Quality Circle”, Proceedings of the All India Seminar on Recent
Trends in Manufacturing System, the Institution of Engineers, Regional Engineering
Collage, Crusher, (1999) pp: 107-111
“Trade and Demand Analysis of the National Economy”, Operations Management for
Global Economy: Challenges and Prospects, (POMS-1999), Indian Institute of Technology
Delhi, New Delhi, (1999) pp: 76-83
“Developing Strategic Plan for Corporate 2000: Issue Involved”, Trends in Mechanical
Engineering Education and Research, Proceedings of the 11th ISME Conference on
Mechanical Engineering, Department of Applied Mechanics I.I.T. Delhi, (1999)pp:273-
18 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
280, New Delhi
“Modeling National Economy an Integrative Approach”, Proceeding International
Conference on Cognitive Systems 1998, NIIT, 866-875, New Delhi. 1998“Technology
Management in The Indian Steel Industry: A Case Study of SAIL “, Proceedings of
International Conference on Management of Technology, ICMOT-1998, Indian Institute of
Technology Delhi, New Delhi, 1998
“Indian Iron and Steel Industry Transition under Economic Reforms”, Productivity, Oct-
Dec 1998, 384-391, Vol. 39, No 3, New Delhi. 1998
“Intersectoral Modeling of Steel Industry”, CAD CAM Robotics and Factories of the
Future, Narosa Publishers, New Delhi. (1996) pp: 717-726
“System Dynamics Model for Steel Planning at National Level”, System Dynamics
for Management Support, Wiley Eastern Limited, New Delhi. INDIA, (1993) pp: 325-334
“Assembly Line Balancing: A Case Study”, Industrial Engineering Review, Aligarh,
INDIA, 1993
19 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
DELIVERED LECTURES /CONFERENCE LECTURES/ KEYNOTE
SPEECH/ SESSION CHAIRED:
Inaugural address on “Integrated System Modeling through ISM and IRP” in
TEQIP Sponsored Faculty Development Programme, Department of Mechanical
Engineering, Deenbandhu Chhotu Ram University of Science and Technology,
Murthal, Sonepat (Haryana)-131039, April 16, 2015.
Delivered Extension Lecture on “Introduction to six sigma” in TEQIP-II sponsored
programme, two-week FDP on “Automation in Manufacturing (AIM-2015),
Department of Mechanical, Production & Industrial Engineering, DTU during 04-
15 May 2015.
Delivered lecture on “e-governance” in AICTE sponsored Faculty Development
Programme On “Mechatronics & Robotics in Manufacturing Industries”,
Department of Mechanical Engineering, Faculty of Engineering & Technology
(FET), Jamia Millia Islamia 27th Feb to 12th March, 2015
LATEST ORIENTATION PROGRAM ATTENDED:
Academic Staff College, JMI, Professional Development Program for Senior
Faculty on “E-Learning in Higher Education” from 4th
January to 9 th
January, 2010.
Organized by UGC-ASC in Collaboration with FTK Centre for Information
Technology
Inaugural address in 11th Annual World Congress of the Academy for Global
Business Advancement (AGBA), Indian Institute of Technology Delhi, New Delhi,
India on November 20-23, 2014
Chaired a session 11th Annual World Congress of the Academy for Global Business
Advancement (AGBA), Indian Institute of Technology Delhi, New Delhi,
India on November 20-23, 2014.Inaugural address on “Flexible Capacity Building in
Asia and the Pacific”, on Joint Conference 7th
, ICCB and 14th
, GLOGIFT, October,
16, 2014, Curtin University, Singapore
Chaired a session Flexible Systems Management in 7th international conference on
contemporary business & 14th global conference on flexible systems management,
GLOGIFT’14, Curtin University, Singapore, 17th October 2014.
Lecture on “Supply Chain Management Processes for Competitive Advantage”, at
College of Business and technology, February 17, 2012, University of Nebraska,
Kearney, USA
Lecture delivered on “Lean Manufacturing” in the one-day seminar on Advance
Industrial Engineering (AIE-2011)” ITS Engineering College, Noida. Special Lecture
delivered on “Recent Trends in Supply Chain Management”, at Academic Staff
College, JMI, on 12th
, September, 2011
Paper presented “Computer Information Systems-Firm Performance Following IT
Outsourcing Decisions”, 53rd
, Annual National Mountain Plains Management
Conference Colorado Mesa University, Colorado USA, October, 7th, 2011
Global Institute of Flexible Systems Management (GIFT), New Jersey, USA, June,
2008 Conference of Non-official Directors of Central Public Sector Enterprises”,
Department of Public Enterprises Ministry of Heavy Industries and Public Enterprises
Government of India, New Delhi, Wednesday, 22nd
July,2009, Hall No.4, Vigyan
Bhavan, New Delhi.
20 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
Presented paper /participated in the Eight Global Conference on Flexible Systems
Management (GIFT) 08 held on June 14-16, 2008 at Stevens Institute of Technology,
Hoboken, New Jersey, USA.
IMT Ghaziabad, International Conference on Knowledge Management and
Intellectual Capital 26-27 February, 2009, IMT Ghaziabad. Present paper
“Technology Absorption: A case study of Indian automobile component
manufacturing organization”
Chaired the technical session in the All India Seminar on “Ergonomics for Improved
Productivity, EIP2009” held at Ergonomics Research Division, Department. of Mech.
Engg. Z. H. College of Engg. & Tech. AMU. During November 21-22, 2009
Lecture delivered on “Lean Manufacturing” in the one-day seminar on Advance
Industrial Engineering (AIE-2011)” ITS Engineering College, Noida.
Special Lecture delivered on “Recent Tends in Supply Chain Management”, at
Academic Staff College, JMI, on 12th
, September, 2011.
21 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
ACADEMICS EXPERIENCE
Jan’2002 till date Professor, Department of Mechanical Engineering,
Faculty of Engineering & Technology, Jamia Millia
Islamia
July 2007- to 2011 Honorary Visiting Professor, Department of
Management Studies, IIT Delhi
Aug’1992-Jan’2002 Reader, Department of Mechanical Engineering,
Faculty of Engineering & Technology, Jamia Millia
Islamia
Dec’1987-Aug’1992 Lecturer, Department of Mechanical Engineering,
Faculty of Engineering & Technology, Jamia
MilliaIslamia
Mar’1987-Nov’1987 Lecturer, Department of Mechanical Engineering,
Z.H. College of Engineering and Technology,
A.M.U., Aligarh, India
Courses taught Postgraduate Level
Creative Problem Solving, Technology Management, Strategic Management,
Managerial Economics, Corporate Environment, Computing for Managers,
Operations Management, Supply Chain Management
Courses taught Graduate Level
Industrial Engineering, Operations Research, Production Engineering, Workshop
Technology, Production Engineering, Material Science, Managerial Economics
and Operations Research
CONTRIBUTION TO ACADEMICS AND INSTITUTIONAL DEVELOPMENT
Head Mechanical from 2010 to 2013. Effectively running B Tech, B E, M Tech
and Research program. Bought FIST and SAP to the department along-with DST,
MoEF, AICTE funding, developed new labs to support the updated syllabus for B
Tech effective from 2012 and M Tech Syllabus effective from 2011.to bring
department to international level.
Co-ordinator M.B.A. (Evening) program from 2001 to 2010. Effectively
running the program through syllabus design and updating, faculty arrangement
day-to-day administration, drafting examination regulations and other regulations,
maintaining rapport with other institution, industry faculty and the students
Member / Member Coordinator of NAAC committee for accreditation &
Assessment of Management, Engineering and other courses of various Indian
institutions and Universities since 2005. Has also undergone NAAC training
Program at Bangalore 2008 and 2012
Member of National Board of Accreditation (NBA) of AICTE as expert for
Mechanical Engineering and Management area. since 2005. Has also undergone
training for new methodology in 2012
Expert for various selection committees for director, professor, reader and lecturer
22 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
in the areas of management, business economics, mechanical engineering and
allied areas
Superintendent for B.E., B Tech., M.B.A, BDS, M Tech, Diploma Engg. etc.
entrance examinations
Academic Council Nominee for selection committee at various institution as
AMU, DTU, NIT Jaipur, NIT Jalandhar, NITTR, Alia University, GB Pant Engg
College, Pantnagar Agricultural University, Pantnagar, IGNOU, University of
Delhi, Apeejay , Galgotia, GNIT, Shankara, etc.
Delivered Inaugural keynote address at Jaipuria Institute of Management,
Lucknow, on Flexible Systems Management in Nov 2007
Conceptualization, design, development and maintenance of MBA (evening)
program website www.jmimbae.org
Organized International Conference “Third Global Conference on Flexible
Systems Management”, Theme: Technology Transfer, Innovation and Flexibility
for Reshaping the world... at Faculty of Engineering and Technology, Jamia Millia
Islamia, New Delhi, India from 12-15 March’ 2004
Delivered Extension lecture, at Faculty of Business and Agriculture Studies,
Aligarh Muslim University, Aligarh,” E- Governance & Government: Initiatives
and Challenges”, 24th
March’ 2004.
Delivered Keynote address at Sankara College of Engg & Tech, Jaipur on Power
Scenario of India in Oct’2004
Conceptualized the establishment of Center for Management Studies at Jamia
Millia Islamia, 2001-2
Member Development, Technical Evaluation, IT Evaluation, IT need assessment,
Accreditation, Convocation and other Committees of Jamia Millia Islamia, New
Delhi
Delivered Extension lecture, at Milwaukee School of Engineering, Milwaukee at
Wisconsin, USA,” SWOT Analysis of Rockwell Automation’s Industrial
Automation Business”, 5th, August 2001.
Editor, E-Mat, Electronic Newsletter of MBA Program, at Jamia Millia Islamia,
New Delhi, 2001 to 2004
Undergone advanced training in the area of Industrial Automation at Milwaukee
School of Engineering, and the research and development facilities of Rockwell
Automation at Milwaukee and Mequon, USA
Delivered Extension Lecture at Academic Staff College at JMI,” Role of IT in
Business Transformation: A comparison of USA and India, June’ 2001
Conceptualized and Organized, National Conference on Emerging Trends in
Technology Management, Mathura, 2006,
Coordinator B.E. (Mechanical) during the session 1997 and 1998
Coordinator Training and Placement”, Department of Mechanical
Engineering,1990
Instrumental in developing Industrial Engineering Laboratory, Engineering
Workshop, Material Science laboratory, Ergonomics Laboratory etc.
Conducted Entrepreneurship Awareness Camps, 1990
Designed Syllabi of B.E. / B Tech, M. Tech./ M.B.A. for Delhi College of
Engineering, Jamia Millia Islamia, IGNOU, G. B. Pant University, NITTR, Aizwal
University, Guru Nanak Institute of Management, GNIT, IIT Roorkee and various
other universities, engineering and management institutions.
23 | P a g e
PROFESSOR ABID HALEEM - CIRCULUM VITAE
Workshop Superintendent, Faculty of Engineering, Jamia Millia Islamia, New
Delhi
Member of AICTE expert committee for approval, accreditation, of Management
and Engineering programs since 2000
Member of Board of Studies of different departments at different /institutions/
universities, Pantnagar, NITJ, NITTR, Punjab University, AMU, DTU, NSIT,
IGNOU, etc.
Faculty Committee Member (as a management and engineering expert) at
different Central and State Universities e.g. AMU, JMI,
Member International Advisory Committee of various international conferences
/ events like International research conference on Quality, Innovation and
Knowledge Management, Feb. 11-15, 2007.at UAH, Huntsville, USA., Research
Conference at University of Monash Australia, GLOGIFT at Stevens Institute of
Technology, USA, etc.
PERSONAL INFORMATION
Father’s Name : Dr. Abdul Haleem
Residential address : B-111, Khan Abdul Gaffar Khan Enclave
Jamia Millia Islamia, Jamia Nagar,
New Delhi 110025, INDIA
