PRODUCTS | PRICE LIST ABS DWVWS DBA V PRICE LIST 5 LABS-DWV | EFFECTIVE FEBRUARY 3, 2020 rev05.22.2020 www .lascofittings. com Customer Service (800) 776-2756 PART NUMBER SIZE (INCHES)PCS/CTN

ABS-DWV | EFFECTIVE FEBRUARY 3, 2020 revised May 22, 2020

PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER

A7 ABS- DWV

P R O D U C T S | P R I C E L I S T

ABS DWVABS DRAIN, WASTE & VENT FITTINGS

ABS DWV PRICE LIST

2LABS-DWV | EFFECTIVE FEBRUARY 3, 2020 rev05.22.2020Customer Service (800) 776-2756 www.lascofittings.com

LIMITATIONS:LASCO DWV fittings are intended for use in non-pressure sani-tary drain, waste and vent systems or storm water drainage systems. Fittings can withstand temperatures typically found in DWV and storm water drainage applications. The maximum recommended continuous use temperature in drainage sys-tems is 140°F.

STORAGE AND HANDLING:Keep products clean. Store in original packaging indoors, or under a suitable ventilated non-transparent cover when stored outdoors. Do not store the material in direct sunlight. Store pipe properly to prevent sagging or bending. Do not store ABS piping products in close proximity to heat produc-ing sources or in tightly enclosed areas. Exposure to exces-sive temperatures (≥150°F) can result in distortion and dis-coloration of product. Exposure to sunlight during typical construction periods is not harmful. Prolonged exposure to direct sunlight must be avoided. Use care when handling to avoid damage. Do not drop or drag product or have other objects dropped on LASCO DWV products.

HANGERS AND SUPPORTS:Hangers and supports selected must have adequate load bearing surface, and must not compress, abrade, cut or oth-erwise distort pipe or fittings. Hangers and supports are to be installed in such a manner as to allow free movement of the piping caused by thermal expansion/contraction. All pip-ing system components are to be aligned properly without strain. Grade of horizontal drainage and vent piping is to be adhered to ensure proper drainage as specified in applicable code. Horizontal runs of drainage piping are to be supported at no more than 4ft intervals, at changes in direction or eleva-tion, and at end of branches. On vertical runs maintain pipe in straight alignment and support at each floor level or at 10 ft intervals, whichever is less. Provide proper support to piping exposed to wind, snow and ice loading, and extreme tempera-ture swings. Follow applicable plumbing code requirements.

THERMAL EXPANSION:Provisions must be made for expansion and contraction of piping systems exposed to temperature fluctuations by using properly sized expansion loops, piping offsets, or the installa-tion of expansion joints.

FIRE STOPPING:Through wall penetrations of fire rated assemblies meeting the requirements of ASTM E814 using ABS pipe are accepted in the model codes. Verify code interpretations regarding plastic pipe through penetrations with local authority having jurisdiction (AHJ).

CHEMICAL COMPATIBILITY:ABS can be damaged by contact with certain fire-stop com-pounds, thread sealants, cleaning and wetting agents, surface surfactant and other chemical agents. Contact LASCO Techni-cal Services for additional information.

NOTES:Follow applicable plumbing code. Plastic piping systems must be engineered, installed, operated, and maintained in accor-dance with accepted codes, standards, and procedures. In-stallation shall conform to all applicable plumbing, building, and fire codes. Suitability for the intended application should be determined and verified by the designer and/or installer prior to use. Chemical resistance data must be referenced for proper material selection prior to use in chemical drainage ap-plications.

ABS DWV SAMPLE SPECIFICATION:All ABS DWV fittings shall be supplied by LASCO Fittings, Inc. from a rigid Acrylonitrile-Butadiene-Styrene (ABS) compound with a Cell Classification 32222 per ASTM D3965. ABS DWV fit-tings supplied by LASCO shall be manufactured in compliance to ASTM D2661, consistently meeting and/or exceeding the Quality Assurance and requirements of this standard regard-ing material, workmanship, impact resistance, dimensions, and product marking. All ABS DWV fittings shall meet the ge-ometries and lay length requirements of ASTM D3311. All ABS DWV injection molded fittings shall be supplied by LASCO Fit-tings, Inc.

ABS DWV SPECIFICATIONS

ABS DWV PRICE LIST

3LABS-DWV | EFFECTIVE FEBRUARY 3, 2020 rev05.22.2020 Customer Service (800) 776-2756www.lascofittings.com

PART NUMBER SIZE (INCHES) PCS/CTN CTN/PLT LIST PRICE

COUPLINGABS100-015 1½ 100 80 4.80ABS100-020 2 100 48 6.01ABS100-030 3 60 19 18.06ABS100-040 4 25 24 30.20ABS100-060 6 12 18 126.54

FEMALE ADAPTERABS101-015 1½ 100 64 8.26ABS101-020 2 100 44 13.00ABS101-030 3 30 39 34.79ABS101-040 4 10 60 39.77ABS101-060 6 8 32 152.08

MALE ADAPTER ABS109-015 1½ 50 192 7.01ABS109-020 2 50 120 12.26ABS109-030 3 30 72 32.89ABS109-040 4 25 24 66.75

PIPE INCREASER - REDUCERABS102-251 2 x 1½ 25 168 12.85ABS102-337 3 x 1½ 35 72 38.09ABS102-338 3 x 2 20 85 30.52ABS102-420 4 x 2 20 48 63.55ABS102-422 4 x 3 20 44 56.96

TRAP ADAPTER, MALEABS113-015 1½ 50 128 11.84ABS113-212 1½ x 1¼ 100 72 16.34

TRAP ADAPTER, FEMALEABS104-015 1½ 50 112 11.07ABS104-212 1½ x 1¼ 50 112 13.78

FITTING CLEANOUT ADAPTERABS105-015 1½ 50 112 10.14ABS105-020 2 50 96 14.02ABS105-030 3 25 48 35.38ABS105-040 4 10 72 66.30

FITTING CLEANOUT ADAPTER + C.O. PLUG

ABS112-015 1½ 100 72 16.98ABS112-020 2 40 144 21.48ABS112-030 3 25 36 47.54ABS112-040 4 10 72 87.37


CLEANOUT PLUG, RAISED NUTABS106-015 1½ 50 256 6.84ABS106-020 2 50 168 7.48ABS106-030 3 25 128 12.16ABS106-035 3½ 25 144 49.55ABS106-040 4 30 64 21.07ABS106-060 6 8 144 71.26

FLUSH BUSHINGABS107-251 2 x 1½ 50 180 7.34ABS107-337 3 x 1½ 35 72 32.11ABS107-338 3 x 2 30 90 20.08ABS107-420 4 x 2 20 72 59.66ABS107-422 4 x 3 30 60 31.61ABS107-532 6 x 4 8 48 167.58

ADAPTER COUPLINGABS117-422 4 x 3 25 48 44.75

ADAPTER BUSHINGABS118-040 4 50 32 32.76

NO - HUB ADAPTERABS119-020 2 25 56 24.47ABS119-030 3 30 72 45.53ABS119-040 4 15 72 65.99

REPAIR COUPLINGABS130-015 1½ 60 144 31.86ABS130-020 2 75 72 16.98ABS130-030 3 10 100 42.17ABS130-040 4 45 18 81.09

1/4 BEND, w/LOW HEEL INLET

ABS293-338 3 x 3 x 2 15 20 87.45

1/4 BENDABS300-015 1½ 100 27 9.33ABS300-020 2 50 27 14.37ABS300-030 3 25 16 36.19ABS300-040 4 10 19 74.34ABS300-060 6 4 18 316.99

1/4 BEND, w/SIDE INLETABS301-338 3 x 2 15 32 103.01

H x H

H x FPT

H x MPT

H x H

SP x SJw/Plastic Nut

& Washer

SP x FPT

H x SJw/Plastic Nut

& Washer

Plug x SP

MPT

SP x H

H x H

H x H

H X H

S&D H x IPS SP

H x SP

DWV Hub to S&D Hub Adapter

H x SP x H

ABS DWV PRICE LIST



1/4 BEND, STREETABS302-015 1½ 100 33 12.04ABS302-020 2 50 27 20.12ABS302-030 3 20 24 44.21ABS302-040 4 20 18 88.39

1/4 BEND, w/LOW HEEL INLETABS303-337 3 x 3 x 1½ 15 32 75.64ABS303-338 3 x 3 x 2 25 30 60.91

LONG SWEEP 1/4 BENDABS304-015 1½ 50 39 15.15ABS304-020 2 25 48 20.11ABS304-030 3 10 30 49.19ABS304-040 4 5 36 84.15

LONG SWEEP 1/4 BEND, STREETABS309-015 1½ 30 72 21.01ABS309-020 2 25 48 23.74ABS309-030 3 20 18 88.99

1/6 BENDABS319-015 1½ 60 72 16.48ABS319-020 2 40 72 23.39ABS319L-020 2 (long turn) 30 72 23.39ABS319-030 3 20 32 75.09ABS319-040 4 10 32 113.34

1/6 BEND, STREETABS320-015 1½ 50 72 51.76ABS320-020 2 20 72 51.22ABS320-030 3 10 72 146.64


1/8 BEND, STREETABS323-015 1½ 100 33 10.65ABS323-020 2 50 33 14.13ABS323-030 3 20 27 34.95ABS323-040 4 10 26 60.57ABS323-060 6 8 18 332.60



1/16 BEND, STREETABS326-015 1½ 50 96 35.51ABS326-020 2 25 90 32.12ABS326-030 3 20 36 54.48ABS326-040 4 15 32 95.07

DOUBLE 1/4 BENDABS327-015 1½ 70 32 40.83ABS327-020 2 30 32 55.97ABS327-030 3 10 32 206.67ABS327-241 2 x 1½ 50 32 61.09

CLOSET BEND, REDUCINGABS329-422 4 x 3 20 18 93.85

CLOSET BEND, REDUCINGABS330-422 4 x 3 20 18 53.52ABS330X-422 (with test cap) 4 x 3 10 32 106.13

VENT ELLABS331-015 1½ 20 120 16.75ABS331-020 2 30 60 27.71ABS331-030 3 20 32 68.70

SANITARY TEEABS400-015 1½ 100 19 13.80ABS400-020 2 35 33 21.26ABS400-030 3 30 12 57.88ABS400-040 4 12 18 102.89ABS400-060 6 3 24 513.34

SANITARY TEE, REDUCINGABS401-241 2 x 1½ x 1½ 25 48 18.93ABS401-242 2 x 1½ x 2 25 44 21.32ABS401-251 2 x 2 x 1½ 50 27 18.50ABS401-337 3 x 3 x 1½ 25 32 39.76ABS401-338 3 x 3 x 2 10 45 46.09ABS401-420 4 x 4 x 2 20 18 110.53ABS401-422 4 x 4 x 3 15 18 103.49ABS401-532 6 x 6 x 4 5 18 581.43

SANITARY TEE, STREETABS403-015 1½ 50 48 34.34ABS403-020 2 40 32 46.45ABS403-030 3 20 18 79.61ABS403-040 4 10 18 242.36

H x SP

H x SP

H x H

H x SP

H x H

H x SP

H x H

H x H

H x SP

ALL HUB

H x SP

H x H

ALL HUB

ALL HUB

SP x H x H

H x H

H x H x H

ABS DWV PRICE LIST



SANITARY TEE, STREET REDUCINGABS404-241 2 x 1½ x 1½ 50 32 34.49ABS404-242 2 x 1½ x 2 25 44 57.18ABS404-251 2 x 2 x 1½ 20 72 37.12ABS404-337 3 x 3 x 1½ 15 48 113.94ABS404-338 3 x 3 x 2 20 32 95.16

SANITARY TEE w/LEFT SIDE INLETABS416-338 3 x 3 x 3 x 2 10 32 131.62

SANITARY TEE w/RIGHT SIDE INLETABS417-338 3 x 3 x 3 x 2 10 32 131.62

DOUBLE SANITARY TEEABS428-015 1½ 15 72 36.03ABS428-020 2 10 72 52.32ABS428-030 3 5 48 137.02ABS428-040 4 8 18 258.75

DOUBLE SANITARY TEE, REDUCINGABS429-252 2 x 2 x 1½ x 1½ 20 48 37.41ABS429-337 3 x 3 x 1½ x 1½ 15 32 161.54ABS429-338 3 x 3 x 2 x 2 15 32 91.08ABS429-420 4 x 4 x 2 x 2 15 18 262.69ABS429-422 4 x 4 x 3 x 3 10 18 55.95

VENT TEEABS441-015 1½ 15 144 41.99ABS441-020 2 20 72 34.82ABS441-030 3 12 32 116.00

CLEANOUT TEE + C.O. PLUGABS443-015 1½ 50 48 39.75ABS443-020 2 45 32 43.56ABS443-030 3 10 44 79.66ABS443-040 4 15 18 168.22

CLEANOUT TEE ABS445-015 1½ 20 96 32.91ABS445-020 2 20 63 36.08ABS445-030 3 10 44 67.50ABS445-040 4 10 18 147.15


CAP ABS447-015 1½ 10 539 15.97ABS447T-015* 1½ (*threaded) 10 12 15.97ABS447-020 2 5 840 22.08ABS447-030 3 10 180 45.65ABS447-040 4 25 48 44.66

TWO-WAY CLEANOUTABS448-030 3 15 18 120.36ABS448-040 4 8 18 190.35

COMBINATION WYE + 1/8 BEND - LONG TURNABS501-015 1½ 40 32 35.88ABS501-020 2 20 33 36.55ABS501-030 3 10 19 86.75ABS501-040 4 10 8 181.38

COMBINATION WYE + 1/8 BEND - LONG TURN, REDUCINGABS502-241 2 x 1½ x 1½ 35 32 55.55ABS502-251 2 x 2 x 1½ 20 44 36.53ABS502-337 3 x 1½ 8 60 98.11ABS502-338 3 x 2 10 33 56.37ABS502-420 4 x 2 5 39 101.54ABS502-422 4 x 3 5 22 130.26

DOUBLE FIXTURE FITTINGABS510-020 2 20 27 79.97ABS510-030 3 10 18 184.92ABS510-241 2 x 1½ x 1½ x 1½ 20 42 54.36ABS510-251 2 x 2 x 1½ x 1½ 20 18 61.75ABS510-329 3 x 2 x 3 x 3 10 18 221.48

WYE ABS600-015 1½ 50 30 22.88ABS600-020 2 25 30 29.91ABS600-030 3 25 11 64.33ABS600-040 4 5 24 130.82ABS600-060 6 2 18 393.64

WYE, REDUCINGABS601-241 2 x 1½ x 1½ 25 48 40.02ABS601-242 2 x 1½ x 2 35 32 70.47ABS601-251 2 x 2 x 1½ 25 36 33.97ABS601-337 3 x 3 x 1½ 15 27 56.65ABS601-338 3 x 3 x 2 25 16 45.07ABS601-419 4 x 4 x 1½ 8 48 194.92ABS601-420 4 x 4 x 2 10 33 83.49ABS601-422 4 x 4 x 3 10 18 112.92ABS601-532 6 x 6 x 4 4 18 356.08

ALL HUB

ALL HUB

ALL HUB

ALL HUB

ALL HUB

H x H x Plug

H x H x FPT

ALL HUB

ALL HUB(One Piece)

ALL HUB(One Piece)

H

ALL HUB

ALL HUB

ALL HUB

SP x H x H*FPT

ABS DWV PRICE LIST



WYE, STREETABS602-030 3 20 18 64.33

WYE, STREET, REDUCINGABS603-338 3 x 3 x 2 25 18 112.60

DOUBLE WYE ABS611-015 1½ 30 32 70.33ABS611-020 2 20 32 83.94ABS611-030 3 15 18 188.67ABS611-040 4 5 18 369.42

DOUBLE WYE, REDUCINGABS612-252 2 x 2 x 1½ x 1½ 25 32 80.14ABS612-338 3 x 3 x 2 x 2 15 24 131.38ABS612-422 4 x 4 x 3 x 3 8 18 305.82

RETURN BENDABS700-020 2 30 32 30.99ABS700-030 3 15 18 227.04ABS700-040 4 10 18 410.18

P-TRAPABS706-015 1½ 25 44 32.18ABS706-020 2 20 22 38.99ABS706-030 3 10 18 167.73ABS706-040 4 15 18 307.65

P-TRAP, UNIONABS708-015 1½ 25 44 43.28ABS708-020 2 30 32 79.16

LA PATTERN P-TRAPABS711-015 1½ 30 32 68.87

DRUM TRAPABS720-015 1½ 4 72 112.04


CLOSET FLANGE (One Piece)ABS800-040 4 25 32 34.29

CLOSET FLANGE (One Piece)ABS801-422 4 x 3 25 32 50.49

CLOSET FLANGE, ADJUSTABLE w/METAL RING ABS811-040 4 30 32 80.68ABS811-422 4 x 3 25 32 88.57

CLOSET FLANGE, ADJUSTABLE w/METAL RINGABS812-040 4 30 32 104.50ABS812-422 4 x 3 25 32 96.66

FLUSH CLOSET FLANGE, ADJUSTABLE w/PLASTIC RINGABS813-040 4 25 32 102.29ABS813-422 4 x 3 25 32 140.25

CLOSET FLANGE, FIXED SLOTS (One Piece)

ABS816-422 4 x 3 25 32 95.76

SWIVEL TRAY (STRAINER) ADAPTER w/GASKET

ABS900-015 1½ x 1½ 100 72 38.13

SP x H x H

SP x H x H

ALL HUB

ALL HUB

H x H

H x H

H x H

H x SJw/Plastic Nut

Plug x H x H

H

SP

H

SP

H

H x FPT

H

ABS DWV PRICE LIST


1. Cut the pipe square, bevel and deburr - A miter box is recommended to ensure square cut ends

2. Clean all dirt, moisture, and grease and check dry fit (pipe should enter socket between 1/3 and 3/4 of socket depth)

3. Using correct size applicator, apply a moderate coating of ABS solvent cement using outward strokes to the inside of fitting socket then apply solvent cement to the outside of the pipe in a similar manner. - ABS solvent cement must meet requirements of ASTM D2235 - If problems are encountered with use of solvent cement, contact solvent cement manufacturer for directions

4. Immediately while solvent cement is still wet, assemble pipe and fittings with one smooth insertion action (while making one quarter turn) not stopping until pipe is completely bottomed out to the pipe stop at socket bottom - Hold in place for a minimum of 30 seconds to avoid push out - Avoid disturbing the joint until initial set time is reached (set time determined by solvent cement manufacturer)

5. Check the cement bead around the joint. A properly made joint will typically show a bead around the entire perimeter. - Wipe any excess cement from the pipe

NOTE: Do not test for leakage until cure time has been reached – the system shall be tested hydrostatically. Check local code requirements for clarification.

NOTE: Always follow safe-handling practices when using solvent cements: use in a well-ventilated area, avoid skin contact (wear gloves) and do not use near heat, sparks or open flame.

SOLVENT WELDING ABS FITTINGS

LABS | EFFECTIVE FEBRUARY 3, 2020 rev05.22.2020

ABS DWV PRICE LIST

LIMITED WARRANTYLASCO Fittings, Inc. products are warranted to be free from manufacturing defects in materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of three years from date of installation. If LASCO products prove defective due to manufacturing defects in material or work-manship during that period, the manufacturer will provide new replacement units of the same type and size. No remedy will be granted under this warranty if LASCO products are not used strictly in accordance with LASCO’s directions with respect to use and storage or if the products have been modified in any way.

THE MANUFACTURER’S LIABILITY UNDER EXPRESSED OR IMPLIED WARRANTY OR FOR ANY REASON IS LIMITED TO FURNISHING REPLACEMENT UNITS OR GRANT-ING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. THIS WARRANTY IS IN LIEU OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NONCOMMERCIAL CONSUMERS. ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.

DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES.DO NOT TEST PVC PIPING SYSTEMS WITH COMPRESSED AIR OR GASES. DO NOT USE FITTINGS WITH LIQUIDS NOT RECOMMENDED BY LASCO. MODIFICATIONS OF FITTINGS VOIDS THE WARRANTY.

STANDARDS AND SPECIFICATIONS

LASCO ABS DWV Fittings are certified to the Uniform Plumbing Code™, the National Plumbing Code of Canada and NSF/ANSI 14. ASTM D-3965 – Acrylonitrile-Butadiene-Styrene (ABS) materials for Pipe and Fittings. ASTM D-2661 – Standard specifications for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 plastic Drain, waste, and vent pipe and fittings.ASTM D-3311 – Drain, Waste, and Vent (DWV) Plastic Fittings PatternsMATERIAL – LASCO ABS DWV fittings are produced from virgin black ABS, ASTM D3965 cell classification 32222.

Standard Terms and Conditions of Sale1. Terms: 2% 35 days, net 45 days.2. Freight: FOB LASCO warehouses. Prepaid on orders totaling $1650 net for one shipment to single destination within the contiguous United States.3. Minimum Order: $100 net. Smaller orders billed at this minimum charge.4. Claims for shipping errors must be made within 15 days to LASCO. Claims for damage or shortages should be directed promptly to the common carrier by the consignee.5. Returns will be accepted only by prior authorization and if shipped freight prepaid. Returned merchandise subject to a MINIMUM 25% handling/restocking charge.6. Pricing is subject to change without prior notice. However, prior notification will be given in the event of price changes in the period between order placement and scheduled shipment.7. Offer to sell is not implied by possession of this or other LASCO price lists.

CUSTOMER SERVICE Phone: (800) 776-2756 | Fax: (731) 772-0835Email: [email protected]

www.lascofittings.com

YWARNING:USE OF COMPRESSED AIR OR GAS IN PVC/ABS/CPVC PIPE AND FITTINGS CAN RESULT IN EXPLOSIVE FAILURES AND CAUSE SEVERE INJURY OR DEATH.

AIR/GAS

Documents

PRODUCTS | PRICE LIST ABS DWVWS DBA V PRICE LIST 5 LABS-DWV | EFFECTIVE FEBRUARY 3, 2020 rev05.22.2020 www .lascofittings. com Customer Service (800) 776-2756 PART NUMBER SIZE (INCHES)PCS/CTN