PRODUCTION PROGRAM€¦ · DEBEM represents a point of both arrival and departure: ARRIVAL: because the corporate quality system is an organisational and management tool developed

1www.debem.it

www.debem.it

R

TÜV NORD ItaliaS.r.l.

ISO 9001

INDUSTRIAL PUMPS

PRODUCTION PROGRAM

R

Made in Italy

2222www.debem.it

WAREHOUSE AND ASSEMBLY

A management system that controls the minimum stock of every component and preassembled part of all pumps in the catalogue means that when receiving an order Debem can advise product availability in real time with fast assembly and certain delivery times.

MORE THAN 30 YEARS AT YOUR SERVICE

Debem has been operating in the liquid transfer sector for more than 30 years.A pioneering business specialising in industrial pumps for highly corro-sive and aggressive applications.The entire company philosophy hinges on close cooperation with the end user and customer feedback, thus establishing a highly-effective technological design and development system for products and ser-vices that has gained the approval of an increasing number of leading players in various sectors.

AN IDEAL

A clear idea in mind:to design innovative high-tech pumps with components and materials capable of withstanding even the most testing and aggressive conditions. Easy-to-install, high peformance pumps.Reliable, long-lasting operation.


ISO 9001

THE QUALITY MANAGEMENT SYSTEM

The certified Quality Management System is the basic tool used by Man-agement in establishing the Corporate Quality Policy, aimed at complete Cus-tomer satisfaction and demonstrable ability to provide products/services that meet Customer and applicable regula-tory requirements.

The quality management system is certified to UNI EN ISO 9001 and for DEBEM represents a point of both arrival and departure:ARRIVAL: because the corporate quality system is an organisational and management tool developed in-house.DEPARTURE: because designing the quality system has stimulated a phase of analysis that will lead to the establishment of new improvement and growth targets.

ABOUT US

3www.debem.it

CUBIC and BOXER

www.debem.itd b i

Cubic mini diaphragm pumps and Boxer diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with very high apparent viscosity up to 50000 cps (at 20°C), even if containing suspended solids.

The stall-prevention pneumatic system assures a safe pump running and it does not need lubricated air.

Self-priming dry capacity even with considerable suction head, fine tuning of speed without pressure loss and the possibility of dry operation without suffering damage mean that these pumps offer unrivalled versatility. In addition, the huge choice of construction materials allows selection of optimum chemical compatibility with the fluid and/or environment without neglecting the temperature range. They are specifically designed for demanding applications with high humidity or in potentially explosive atmospheres (ATEX certification).

This compact range with reduced footprint can be used in banks where space is at a premium.Materials: PP - ECTFESelf-priming capacity: max 3mMax. head: 70mMax. flow rate: 5 ÷ 17 l/minViscosity: up to 5000 cps

The plastic BOXER range is designed for the chemical industry’s most demanding applications including highly-aggressive liquids and acids.Materials: PP - PVDFSelf-priming capacity: max 6mMax. head: 70mMax. flow rate: 30 ÷ 900 l/minViscosity: up to 50000 cps

The metal BOXER range is designed for demanding applications throughout the paint sector and for solvent-based liquids.Materials: Aluminium - AISI 316Self-priming capacity: max 6mMax. head: 70mMax. flow rate: 30 ÷ 900 l/minViscosity: up to 50000 cps

Available in PP, PVDF/ECTFE, ALUMINIUM and AISI 316 STAINLESS STEEL;

Use in potentially-explosive atmospheres(ATEX zone 1-2 certification);

Suitable for demanding applications and high-humidity environments;

Dry operation;

Dry self-priming;

Actuated using non-lubricated air;

Stall-prevention pneumatic circuit;

Adjustable flow rate and head;

Fine tuning of motor speed at constant pressure;

Twin-manifold option (two suction and two delivery);

Bench or ceiling installation;

Three suction and delivery positions;

User-friendly maintenance and parts replacement;

Excellent performance and value for money.

DIAPHRAGM PUMPS

CUBIC PUMPS

PLASTIC BOXER PUMPS

METAL BOXER PUMPS

II 2/2GD c IIB T135°C (zone 1)II 3/3GD c IIB T135°C (zone 2)



q

A = ball valvesB = pumping chamberC1 = product-side diaphragmC2 = air-side diaphragmD = suction manifoldE = delivery manifoldF = pneumatic exchangers

AA

B

C1

B

C2

D

EF

4444www.debem.it

CUBIC and BOXERDIAPHRAGM PUMPS

Drum transfer

Immersed

Self-priming Positive suction head

Twin suction and delivery manifold

Twin suction manifold

HOW IT WORKS

The compressed air introduced by the pneu-matic exchanger (A) behind one of the two diaphragms generates compression and pushes the product into the delivery duct (B], at the same time the opposing diaphragm that is integral with the exchanger shaft cre-ates a vacuum and intakes the fluid (C). Once the stroke has been completed, the pneu-matic exchanger diverts the compressed air behind the opposing diaphragm and the cycle is reversed.

AA

BB

CC

INSTALLATION

Diaphragm pumps should be bolted horizontally to the feet or holes provided with the exchanger shaft positioned horizontally.

Installations:drum transfer (max. viscosity 10000 cps at 20° C)self-priming (max. viscosity 10000 cps at 20° C)under head (max. viscosity 50000 cps at 20° C)immersed (max. viscosity 50000 cps at 20° C)twin suction and delivery manifold (max. viscosity 50000 cps at 20° C)twin delivery manifold

(max. viscosity 50000 cps at 20° C)

PNEUMATIC EXCHANGERS

The heart of an air-operated diaphragm pump consists of the pneumatic ex-changer that DEBEM has succeeded in developing and innovating in a revolu-tionary manner, patenting the most durable and reliable system the market currently has to offer. This device introduces compressed air to alter the pressure balance of the diaphragms assisted by a stall-prevention circuit that ensures optimum performance even under the most critical conditions.

THE COMPONENTS

It has an extremely compact footprint and the small number of components ensures exceptional sturdiness and service life even under the most exacting conditions.The air passages are carefully designed and optimised to prevent the formation of ice even in low-temperature and high-head applications.The DEBEM pneumatic exchanger is an integrated system with a single central cartridge that does not require additional external components.

For further information regarding operation, please visit our website: www.debem.it/eng/boxer-double-diaphragm-pumps-animazione.htm

5www.debem.it


OPERATION

The range of DEBEM diaphragm pumps features a pneumatic exchanger that guarantees faultless operation even with low-pressure compressed air supplies (min 2 bar).Air-chamber volumes and airways are carefully designed to optimise con-sumption.Speed and flow rate can be easily adjusted by regulating air flow, whilst head can be adjusted as a function of compressed air supply pressure.

DEBEM DIAPHRAGMS

Diaphragms are the components subjected to greatest stress during suction and pumping, when they must also withstand the liquid’s chemical attack and temperature. Correct assessment and selection is therefore crucial for dia-phragm service life, investment decisions and maintenance costs. A modern process of design, destructive testing and careful analysis of results has enabled DEBEM to develop LONG LIFE new generation diaphragms. The shape and profile of these products provides a greater working surface and improved load redistribution, thus reducing material stress and yield to a minimum.

NBR EPDMRUBBER DIAPHRAGMS

They are made from rubber compounds with special additives that improve chemical properties as well as mechanical bending and strength character-istics. These diaphragms have a nylon backing cloth that improves stress dis-tribution:

NBR: inexpensive and particularly suited to petroleum- and oil-based liquids; EPDM: good acid, alkaline and abrasion resistance, as well as good flexibility even at low temperatures.

6666www.debem.it

THERMOPLASTIC DIAPHRAGM

They are made from thermoplastic polymers that provide high mechanical stress resistance and distribution.

HYTREL: good abrasion resistance and suitable for food processing.

SANTOPRENE®: excellent acid and alkaline resistance, high flexural strength and good abrasion resistance.


HYTREL SANTOPRENE

PTFEPTFE DIAPHRAGM

This material is noted for its excellent resistance to high temperatures, chemicals and cor-rosive agents. DEBEM PTFE diaphragms are subjected to a double heat treatment in order to increase elasticity and service life. Each batch undergoes random destructive testing in order to verify its performance.This diaphragm can be fitted together with one of those previously mentioned in order to increase resistance to the liquid’s corrosive chemicals and temperature.

PUMPS COMPOSITION CODES

Pump model

B81 P

Pump body

P - PolypropyleneFC- PVDF+CF E - ECTFE (Halar) AL - Aluminium A - AISI 316

T - PTFE T - PTFE A - AISI 316 D - EPDM G - Glass*

* Only Midgetbox

P - Polypropylene F - PVDF A - AISI 316 I - PE-UHMW R - PPS-V E - ECTFE

D - EPDM V - Viton S - Silicone N - NBR T - PTFE

Xif requested

(zone 1)

II 2/2GD c IIB T135°C

C if requested

BOXERex. B81PDTAPDXC Boxer 81 in PP + diaphragm HYTREL + diaphragm PTFE + balls Aisi 316 + ball seats PP + O rings EPDM + twin manifold + conduct

N - NBR D - EPDM H - Hytrel M - Santoprene

Mid - Midgetbox Cu15 - Cubic 15 MICR - Microboxer Min - Miniboxer B50 - Boxer 50 B80 - Boxer 80 B81 - Boxer 81 B100 - Boxer 100 B150 - Boxer 150 B251 - Boxer 251 B502 - Boxer 502 B503 - Boxer 503

Air sidediaphgragm

Twin manifold

Fluid sidediaphgragm Balls Ball seats O Rings Conduct

version

H T A P D X C

Pump model

FB100 A

Pump body

A - AISI 316electropolished

T - PTFE T - PTFE G - Glass

A - AISI 316 T - PTFE

Xif requested

(zone 1)


C if requested

FOODBOXERes. FB100AHTTATFoodboxer 100 in Aisi316 + diaphragms Hytrel + diaphragms PTFE + balls PTFE + ball seats Aisi316 + O rings PTFE

H - Hytrel FB30 = Foodboxer 30FB50 = Foodboxer 50FB80 = Foodboxer 80FB100 = Foodboxer 100FB251 = Foodboxer 251FB502 = Foodboxer 502FB503 = Foodboxer 503

Air sidediaphgragm

Twin manifold


version

H T T A T X C

7www.debem.it


CHEMICAL COMPATIBILITYThe type of liquid, temperature and working environment are factors to be considered when deciding on the best choice of construction materials for the pump and its correct chemical compatibility. Some examples are given in the following table:

SUBSTANCE

Pol

ypro

pyle

ne

PV

DF

ECTF

E (H

alai

r®)

Alu

min

ium

Sta

inle

s S

teel

A

ISI 3

16

NB

R(P

erbu

nan®

)

EPD

M(D

utra

l®)

Pol

yure

than

e

PTF

E(T

eflo

n®)

PP

S-V

(Ryt

on®

)

FPM

(V

iton®

)

San

topr

ene®

PE-

UH

MW

(Pol

esze

ne®

)

Acetaldehyde A1 D B A D A - A A D - B

Acetamide A1 C A A A A - A A B - -

Vinyl acetate B1 A2 A1 B D B2 - A2 - A1 - D

Acetylene A1 A A A B A D A A A - -

Vinegar A B D A B A D A A A - A

Acetone A D A A D A D A A D A1 A2

Fatty acids A A A A B D D A - A D A

A = very good

B = good

C = poor, not recommended

D = severe etching, not recommended

- = information not available

1 = satisfactory up to 22°C (72°F)

2 = satisfactory up to 48°C (120°F)

PRODUCT SERIES DESCRIPTION CERTIFICATION CLASSSTANDARD version- CUBIC- BOXER- EQUAFLUX

Made from non-conductive plastic and/or with non-conductive centre casing or from metal with non-conductive centre casing. II 3/3 GD c IIB T135°C

(for zone 2)CONDUCT version- CUBIC- BOXER- EQUAFLUX

Built with pump casings and/or manifolds (PP + carbon fibre, ECTFE/PVDF + carbon fibre), made from conductive plastic and metal materials (aluminium, stainless steel).

II 2/2 GD c IIB T135°C

(for zone 1)

Debem has filed with the TÜV NORD certification body the documentation certifying ATEX compliance pursuant to Directive 94/9/CE for its ranges of BOXER and CUBIC pneumatic diaphragm pumps and EQUAFLUX automatic pulsation dampeners, as described in the following table.They are manufactured in a STANDARD, class II 3/3GD c IIB T135°C version or - upon request - with special con-struction materials in a CONDUCT, class II 2/2GD c IIB T135°C version.The equipment user is responsible for classifying its area of use. On the other hand, the manufacturer shall identify and affix the certification class of the manufactured equipment.

For further information, please do not hesitate to contact DEBEM’s technical service department.We have obtained this information from reliable sources. Debem has not performed any form of testing in this regard and therefore accepts no liability for the accuracy of the details provided.

Safety symbols in accordance with DIN 40012 Annex A

II 2/2 GD: Surface equipment for use in zones in which gases, vapours or mists and clouds of combustible dust in air occur in normal operation occasionally (EN 1127-1 subclause 6.3) in both the external and internal zone.

II 3/3 GD: Surface equipment for use in zones in which gases, vapours or mists and clouds of combustible dust in air are not likely to occur in normal operation or may occur rarely for a short period only in both the external and internal zone.

c: Equipment protected by constructional safety (EN 13463-5).

IIB: Exclusion of the following products: Hydrogen, acetylene, carbon disulphide.

T 135°: Allowed temperature class. The user shall process fluids in accordance with the corresponding temperature classification, bearing in mind the instructions in the manual and the provisions of current legislation. The user shall also consider the ignition temperatures of gases, vapours or mists and clouds of combustible dust in air in the area of use.

8888www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS

STANDARD: II 3/3 GD c IIB T135°C (zone 2) - CONDUCT: II 2/2 GD c IIB T135°C (zone 1)


MIDGETBOX

CUBIC 15

Intake/delivery connections G 1/4” f

Air connection G 1/8” f

Max. self-priming capacity 3 m

Max. flow rate* 5 l/min

Max. head* 70 m

Max. air supply pressure 7 bar

Max. diameter of passing solids 0 mm

Flow rate litres/min.


Hea

d m

Hea

d m

0 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6

34

60

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

H (ft)

U.S. g.p.m.

0

0 0,2 0,3 0,5 0,6 0,7 0,9 1,0 1,1 1,3 1,4 1,5

10

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

Air supply pressure

Air supply pressure

Air consumption NI/min


4416

25

121

1/4" G

1/4" G

1/8"G

60

75

The dimensions shown are in mm


AIR CONNECTION DELIVERY

INTAKE





Max. head* 70 m


Max. diameter of passing solids 0,5 mm

0 2 4 6 8 10 12 14 16 18 20

50

70

100160

7 bar

6 bar

4 bar

3 bar

5 bar

3,5bar

2 bar H (ft)

U.S. g.p.m.

0

0 0,5 1,0 1,5 2,1

10

2,6 3,1 3,6 4,2 4,7 5,2

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

78,5

78,5

105

105

3/8" G

3/8" G

194

49

607140

3/8" GAIR CONNECTION

DELIVERY

INTAKE

Construction materials and net weight

PP 0,5 Kg (zone 2) 60°C Max Temp.

Construction materials and net weight:

PP 1 Kg (zone 2) 60°C Max Temp.

ECTFE 1,5 Kg (zone 2) 95°C Max Temp.

*The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material.

PP

PP

ECTFE

9www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



MICROBOXER

MINIBOXER - B50





Max. head* 70 m





Hea

d m

Hea

d m

Air supply pressure

Air supply pressure





Intake/delivery connections G 1/2” f or DN 15




Max. head* 70 m





PVDF 1,9 Kg (zone 2) 95°C Max Temp.

Alu 2 Kg (zone 2) 95°C Max Temp.

Aisi 316 3,8 Kg (zone 2) 95°C Max Temp.






168

120

136

16

80

70

165

6120

1/4" G

1/2" G

1/2" G

AIR CONNECTION

DELIVERY

INTAKE

0 5 7,5 10 12 15 16 18 20 22 25 27 28 30 31 32 35 37

120

170

240

7 bar

5 bar

6 bar

4 bar

3 bar

2 barH (ft)

U.S. g.p.m.

0

0

5

1,3

10

1,9 2,6 3,1 3,9 4,2 4,7 5,2 5,8 6,6 7,1 7,3 7,9 8,1 8,4 9,2 9,7

15

20

25

30

35

40

45

5055

60

65

70

0

16,4

32,8

49,2

65,6

82,0

98,4

114,8

131,2

147,6

164,0180,4

196,8

213,2

229,6

168

6,50

247

1/2" G

1/2" G

3/8" G

RESET

100

202

241

153

85

230

1649

1/2" G

1/2" G

3/8" G

RESET

196

232

153

79

B50 MINIBOXER Aisi 316

AIR CONNECTIONAIR CONNECTION

DELIVERYDELIVERY

INTAKE INTAKE0 5 10 15 20 25 30 35 40 45 50

150 300

4205 bar

6 bar

4 bar

3 bar

2 bar H (ft)

U.S. g.p.m.

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

0

0 1,3

10

2,6 3,9 5,2 6,6 7,9 9,2 10,5 11,8 13,2

20

30

40

50

60

70

80

7 bar


ALU

PP

Aisi 316

Aisi 316

ALU

PVDF

PP

PVDF

1011010www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



BOXER 80-81

BOXER 100

Intake/delivery connections G 1” f or DN 25




Max. head* 70 m





Hea

d m

Hea

d m

Air supply pressure

Air supply pressure









Max. head* 70 m






Alu 6,5 Kg (zone 2) 95°C Max Temp.


0 10 20 30 40 50 60 70 80 90 100

450

900

250

4 bar

7 bar

6 bar

5 bar

3 bar

2 bar

0

0

10

20

2,6 5,2 7,9 10,5 13,2 15,8 18,4 21,1 23,7 26,4

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

H (ft)

U.S. g.p.m.

303

2148

3/8" G

RESET

1" G

1" G27

1

217

170

115

27

93

308

2136,50

3/8" G

1" G

1" G

RESET

219

274

170

115

92

B80 B81

AIR CONNECTIONAIR CONNECTION

DELIVERYDELIVERY

INTAKE INTAKE




Alu 8,2 Kg (zone 2) 95°C Max Temp.

Aisi 316 11 Kg (zone 2) 95°C Max Temp.

0 40 50 60 70 80 90 100 110 120 130 140 150 160

350

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

700

1100

1400

0

0

10

10,5 13,2 15,8 18,4 21,1 23,7 26,4 29,0 31,7 34,3 36,9 39,6 42,2

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

H (ft)

U.S. g.p.m.329

2288

RESET

3/8"

1" G

1" G

263

325

202

31

131

110

AIR CONNECTION

DELIVERY

INTAKE


Aisi 316

Aisi 316

ALU

PVDF

PP

PVDF

PP

ALU

11www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



BOXER 150

BOXER 251

Intake/delivery connections G 1” 1/4 f or DN 32




Max. head* 70 m





Hea

d m

Hea

d m

Air supply pressure

Air supply pressure





Intake/delivery connections G 1” 1/2 f or DN 40




Max. head* 70 m





PVDF 20 Kg (zone 2) 95°C Max Temp.








0 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

2100

1800

700

H (ft)

U.S. g.p.m.

0

0 15,8 21,1 26,4 31,7 36,9 42,2 47,5 52,8 58,1 63,4 68,6 73,9 79,2 84,5 89,8 95,1

10

20

30

40

50

60

70

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

493

3268,50

1" 1/2 G

1" 1/2 G

1/2" G

RESET

493

417

254

138

AIR CONNECTION

DELIVERY

INTAKE

0 20 40 60 80 100 120 140 160 180 200 220

700

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

1300

1600

900

H (ft)

U.S. g.p.m.

0

0

10

5,2 10,5 15,8 21,1 26,4 31,7 36,9 42,2 47,5 52,8 58,1

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

e p

267

399

8

RESET

1/2" G

1 1/4" G

1 1/4" G

386

302

220

150

42

122

AIR CONNECTION

DELIVERY

INTAKE


ALU

Aisi 316

PVDF

ALU

PVDF

PP

PP

Aisi316

1211212www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



BOXER 502 plastic

BOXER 502 metal





Max. head* 70 m





Hea

d m

Hea

d m

Air supply pressure

Air supply pressure









Max. head* 70 m









1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

00

10

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

650600550500450400350300250200150100 50

0 171,7158,5145,2132,0118,8105,692,479,266,052,839,626,413,2

H (ft)

U.S. g.p.m.

580

400

1/2

" G

2" G

2" G

606

726

404

250

350

200

AIR

CO

NN

ECTI

ON

DELIVERY

INTAKE

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

00

10

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

650600550500450400350300250200150100 50

0 171,7158,5145,2132,0118,8105,692,479,266,052,839,626,413,2

H (ft)

U.S. g.p.m.

li i/ i

470

36411

1/2" G

2" G

705

404

582

350

88

250

2" G

Ø 350

182,5

404

521

621

566

364

12,50

2" G

2" G

1/2” G

Aisi 316 Alu

DELIVERY

DELIVERYAIR CONNECTING

AIR

CO

NN

ECTI

NG


PP

ALU

INTAKE INTAKE

Aisi 316

PVDF

13www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



BOXER 503 plastic

BOXER 503 metal





Max. head* 70 m





Hea

d m

Hea

d m

Air supply pressure

Air supply pressure









Max. head* 70 m









0 50 150 250 350 450 550 650 750 850 950

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

4000

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

295,2

0

0

10

13,2 39,6 66,0 92,4 118,8 145,2 171,7 198,1 224,5 250,9

20

30

40

50

60

70

80

90

H (ft)

U.S. g.p.m.

585

400

3/4" G

3" G

3" G

606

726

200404

250

350

AIR CONNECTION

DELIVERY

INTAKE

0 50 150 250 350 450 550 650 750 850 950

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

4000

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

295,2

0

0

10

13,2 39,6 66,0 92,4 118,8 145,2 171,7 198,1 224,5 250,9

20

30

40

50

60

70

80

90

H (ft)

U.S. g.p.m.

36060

3" G

3" G

3/4 " G

694

58

403

349

806

R175

15

AIR CONNECTION

DELIVERY

INTAKE


PVDF

ALU

PVDFPVDF

Aisi 316

1411414www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



FOODBOXER 30

FOODBOXER 50Flow rate litres/min.


Hea

d m

Hea

d m

Air supply pressure

Air supply pressure







Intake/delivery connections G 1/2” f (*)Air connection G 1/4” fMax. self-priming capacity 6 mMax. flow rate* 30 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 2 mm

(*) available with triclamp or din connections on request

0 5 7,5 10 12 15 16 18 20 22 25 27 28 30 31 32 35 37

120

170

240

7 bar

5 bar

6 bar

4 bar

3 bar

2 barH (ft)

U.S. g.p.m.

0

0

5

1,3

10

1,9 2,6 3,1 3,9 4,2 4,7 5,2 5,8 6,6 7,1 7,3 7,9 8,1 8,4 9,2 9,7

15

20

25

30

35

40

45

5055

60

65

70

0

16,4

32,8

49,2

65,6

82,0

98,4

114,8

131,2

147,6

164,0180,4

196,8

213,2

229,6

120

80

139

170

70

177

1246

1/4" G 1/2" G

1/2" G

AIR CONNECTION DELIVERY

INTAKE



Intake/delivery connections G 1/2” f (*)Air connection G 3/8” fMax. self-priming capacity 5 mMax. flow rate* 50 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 4 mm

0 5 10 15 20 25 30 35 40 45 50

150 300

4205 bar

6 bar

4 bar

3 bar

2 barH (m) H (ft)

U.S. g.p.m.

lit i/ i

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

0

0 1,3

10

2,6 3,9 5,2 6,6 7,9 9,2 10,5 11,8 13,2

20

30

40

50

60

70

80

7 bar

230

1649

1/2" G

1/2" G

3/8" G

196

232

153

79

AIR CONNECTION

DELIVERY

INTAKE

*The curves and performance values refer to pumps with submerged suction and a free delivery outlet

with water at 20°C, and vary according to the construction material.



FDA

FDA

compliant

compliant

Aisi316 electro-polished


15www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



FOODBOXER 80



Hea

d m

Hea

d m

Air supply pressure

Air supply pressure





303

2148

3/8" G

1" G

1" G

271

217

170

115

27

93

326,

50

201,50

272,

50

110

307,50

213,50

8

1" G

1" G

3/8" G


Intake/delivery connections G 1” f (*)Air connection G 3/8” fMax. self-priming capacity 6 mMax. flow rate* 100 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 4 mm





0 10 20 30 40 50 60 70 80 90 100

450

900

250

4 bar

7 bar

6 bar

5 bar

3 bar

2 bar

0

0

10

20

2,6 5,2 7,9 10,5 13,2 15,8 18,4 21,1 23,7 26,4

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

H (ft)

U.S. g.p.m.

AIR CONNECTION

DELIVERY

INTAKE

Intake/delivery connections G 1” f (*)Air connection G 3/8” fMax. self-priming capacity 5 mMax. flow rate* 150 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 4 mmConstruction materials and net weight


0 40 50 60 70 80 90 100 110 120 130 140 150 160

350

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

700

1100

1400

0

0

10

10,5 13,2 15,8 18,4 21,1 23,7 26,4 29,0 31,7 34,3 36,9 39,6 42,2

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

H (ft)

U.S. g.p.m.

AIR CONNECTIONDELIVERY

INTAKE



FDA

FDA

compliant

compliant



1611616www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



FOODBOXER 150



Hea

d m

Hea

d m

Air supply pressure

Air supply pressure





4678

475

493

1/2" G

1" 1/2 G

1" 1/2 G

614

14 38,5

738

,47

254





Intake/delivery connections G 1” 1/4 f (*)Air connection G 1/2” fMax. self-priming capacity 5 mMax. flow rate* 220 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 5 mmConstruction materials and net weight


0 20 40 60 80 100 120 140 160 180 200 220

700

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

1300

1600

900

H (ft)

U.S. g.p.m.

0

0

10

5,2 10,5 15,8 21,1 26,4 31,7 36,9 42,2 47,5 52,8 58,1

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

388

2669,50

1/2" G

RESET

1" 1/4 G

1" 1/4 G

390

307

220

150

122

AIR CONNECTION

DELIVERY

INTAKE

Intake/delivery connections G 1” 1/2 f (*)Air connection G 1/2” fMax. self-priming capacity 6 mMax. flow rate* 340 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 6 mmConstruction materials and net weight


0 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

2100

1800

700

H (ft)

U.S. g.p.m.

0

0 15,8 21,1 26,4 31,7 36,9 42,2 47,5 52,8 58,1 63,4 68,6 73,9 79,2 84,5 89,8 95,1

10

20

30

40

50

60

70

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

AIR CONNECTION

DELIVERY

INTAKE

FDA

FDA

compliant

compliant




17www.debem.it

TEC

HN

ICA

L D

ATA

TEC

HN

ICA

L D

ATA

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

DIM

EN

SIO

NS

DIM

EN

SIO

NS



FOODBOXER 502



Hea

d m

Hea

d m

Air supply pressure

Air supply pressure





470

36411

1/2" G

2" G

705

404

582

350

88

250

2" G



838

,50

381

361

546

3/4" G

350

106

,50

682

5

0

3" G

3" G



Intake/delivery connections G 2” f (*)Air connection G 1/2” fMax. self-priming capacity 4 mMax. flow rate* 650 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 8 mmConstruction materials and net weight




1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

00

10

20

30

40

50

60

70

80

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

650600550500450400350300250200150100 50

0 171,7158,5145,2132,0118,8105,692,479,266,052,839,626,413,2

H (ft)

U.S. g.p.m.

AIR CONNECTION

DELIVERY

INTAKE

Intake/delivery connections G 3” f (*)Air connection G 3/4” fMax. self-priming capacity 5 mMax. flow rate* 900 l/minMax. head* 70 mMax. air supply pressure 7 barMax. diameter of passing solids 10 mm

0 50 150 250 350 450 550 650 750 850 950

1200

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

3800

3000

2400

4000

0

32,8

65,6

98,4

131,2

164,0

196,8

229,6

262,4

295,2

0

0

10

13,2 39,6 66,0 92,4 118,8 145,2 171,7 198,1 224,5 250,9

20

30

40

50

60

70

80

90

H (ft)

g p

FDA

FDA

compliant

compliant


AIR CONNECTION

DELIVERY

INTAKE



1811818www.debem.it

SANIBOXERSANITARY DIAPHRAGM PUMP for handling food and pharmaceutical fluids

II 2/2GD c IIB T135°C (zone1)II 3/3GD c IIB T135°C (zone2)

2/2GGD c IIB T135°C (zone1)

The SANIBOXER diaphragm pumps consist of a centrally lodged coaxial pneumatic motor with diaphragms fixed to its shaft.

The ball valves and the seats of the suction and delivery lines are located on the ends of the two pump bodies.

The compressed air injected by the coaxial exchanger behind one of the two diaphragms deter-mines the compression and push-es the product in the delivery line.

At the same time the diaphragm, integral with the exchanger’s shaft, creates a depression while sucking the fluid.

Once the run is completed, the pneumatic coaxial exchanger de-viates the compressed air behind the opposite diaphragm and the cycle reverses automatically.

EXPECTED USEThe pneumatic SANIBOXER pumps have been designed and constructed to pump liquid food with an apparent viscosity from 1up to 20.000 cps at 20°C (see “Types of Installations”). They are built with materials compatible with liquid foods and with the chemical substances to be used to clean and sanitize the pump.

The pump may be used at operating temperatures (temperature of the fluid + environmental temperature) compatible with the pump materials and in any case never exceeding 95°C

3A certified, made with mechanically polished Aisi316, the SANIBOXER pump is designed for the Food-Processing, Cosmetic and Pharmaceutical industry.

FDAcompliant

15441544

Self-priming Positive suction headTYPES OF INSTALLATIONSNEGATIVE SUCTION: with fluids at most up to 5.000 cps at 20°C;

UNDER HEAD SUCTION: with fluids up to 20.000 cps at 20°C.

WORKING PRINCIPLE EASY-CLEAN VALVE

FAST EMPTYING SYSTEM

360°

Patent system

Aisi 316mechanically polished

RA < 0,8μm

19www.debem.it

ACCESSORIES - DIAPHRAGM LEAKER SENSORThis system designed to be used by SANIBOXER diaphragm pumps, is provided with a self-diagnosis function for the contacts and the right operation of the circuit. In the event of a malfunction, the red pilot lamp always lits up and, depending on the irregularity the audible alarm will activate too.

The control unit operates exclusively during the pumping of conductive fluids; it detects the diaphragm breakage through the contacts placed behind the diaphragms, inside the compression chamber. When the liquid stands between the two sensors, it causes the closing of the electric circuit placedinside the control unit and consequently the switching off of the output relay, deactivating then the solenoid valve which controls the pump, stopping its

operation and enabling both a visual and acoustic alarm.

Suction/delivery connections 1”1/2 clamp

Air connection 3/8”

Air pressure (max.) 7 bar

Max. operating temperature (fluid + amb.) 95°C

Dry suction capacity (PTFE diaphragm) 4m

Max flow rate (water at 18°C with immersed intake manifold)

120 l/m

Net weight (empty) 26 KG


350

7 bar

6 bar

5 bar

4 bar

3 bar

2 bar

700

1100

1400

80

70

60

50

40

30

20

10

0

262,4

229,6

196,8

164

131.2

98.4

65.6

32.8

00 30 40 50 60 70 80 90 100 110 120 130 140

0 30 10.5 13.2 15.8 18.4 21.1 23.7 26.4 29 31.7 34.3 36.9

liters/min.

SANIBOXERSANITARY DIAPHRAGM PUMP for handling food and pharmaceutical fluids

SANIBOXER 100Construction materials:Mechanically polished Aisi316

Air consumption NI/minAir supply pressure

STANDARD: II 3/3 GD c IIB T135°C (zone 2)CONDUCT: II 2/2 GD c IIB T135°C (zone 1)

H (m

)

U.S. g.p.m.

H=

ft61

8

367

458

238

110

405

DELIVERY 1" 1/2 CLAMP

INTAKE 1" 1/2 CLAMP

AIR CONNECTION 3/8" G

347

335

R2020

0

70SANIBOXER 100 DIMENSIONAL

SANIBOXER 10

1 di 1 .

.

.

.

Dimension without tolerance according to ISO 2768-m

.

. .

.

.

.

.

. .

.

.

.

.

.

.

DRAWINGMATERIAL

A3

Tel. 0331 074034Fax 0331 074036

[email protected]

DRAWING UNDER RESTRICTED OWNERSHIPPROTECTED ACCORDING TO THE LAW. IT IS

PAPER FORMAT DATE REV. DESCRIPTION SIGN. A

DESCRIPTION

FDAcompliant

15441544

Pump model

FB100 A

Pump body

A - AISI 316electropolished

T - PTFE A - AISI 316 D - EPDMT - PTFE

(zone 1)


C if requested

COMPOSITION CODESes. SB100ADTTATSaniboxer 100 in Aisi316 + diaphgragm EPDM + diaphgragm PTFE + balls Aisi 316 + ball seats Aisi316+ O rings PTFE

D - EPDMSB 100 = SANIBOXER 100

Air sidediaphgragm


version

D T T A T C

T - PTFE A - Aisi 316

2022020www.debem.it

EQUAFLUXPULSATION DAMPENERS

EQUAFLUX automatic diaphragm pulsation dampeners feature solid build and high performance. They are fitted to the discharge line of diaphragm pumps in order to smooth pulsating flows and can be used with liquids having apparent viscosity of up to 50000 cps (at 20°C) even if containing suspended solids of considerable size.EQUAFLUX dampeners automatically adapt to system conditions without the need for manual adjustment or calibration.The ability to minimise pulsations, vibrations and water hammer means that this component provides excellent protection and smooth system flow.The huge choice of construction materials allows selection of optimum chemical compatibility with the fluid and/or environment without neglecting the temperature range. Dampeners are also available for use in potentially explosive atmospheres (ATEX certification).

Available in PP, PVDF, PPS-V, AISI 316

Automatic dampening control;

Suitable for demanding applications;

Use in potentially-explosive atmospheres; (ATEX certifications)

Use in environments subject to high humidity and condensation;

Actuated using non lubricated air;

Range of construction materials ensures correct fluid compatibility;

User-friendly parts replacement and maintenance;

Excellent performance and value for money.

HOW IT WORKSThe compressed air entering the back-pressure chamber behind the diaphragm creates a pneumatic cushion that adjusts automatically to compensate the shock produced by the pressure pulse of the fluid generated by the pump.

A = expansion openingB1 = air-side diaphragm

B2 = fluid-side diaphragmC = automatic pneumatic valveD = compressed-air chamber

A B1 B2 DC

Air supply

Intake

Delivery connections

Air supply: 2 ÷ 7 bar

II 3/3 GD c IIB T135°C (zone 2)II 2/2 GD c IIB T135°C (zone 1)

Dampener model Dampener body

P

P - PolypropyleneF - PVDF R - PPS-V A - Aisi 316AL - Aluminium

T - PTFE (zone 1)


C - if requested

COMPOSITION CODESex. EQ100PHTC Equaflux 100 in PP + Hytrel diaphragm + PTFE diaphragm + conduct

H - Hytrel M - Santoprene

EQ 51 - Equaflux 51 EQ 100 - Equaflux 100 EQ 200 - Equaflux 200 EQ 300 - Equaflux 300 EQ 302 - Equaflux 302 EQ 303 - Equaflux 302

Air side diaphragm Product side diaphramg

Coduct version

H T CEQ100

21www.debem.it


PP

PP

PVDF

PPS-VPPS-V

PP

PVDFPVDF

PP

PPPP

PVDF

PPS-VPPS-V

PVDF

Product connection

Air connectionMax. air supply

pressureApplicability Weight

Max. operating temp.

Dimensionmm

G 3/4” ø 6 mm 7 bar

MIDGETBOX PP, CUBIC 15

PP, MICROBOXER

PP

0,5 Kg 60°C 121x117

G 3/4” ø 6 mm 7 bar

CUBIC 15 ECTFE,

MICROBOXER PVDF and Aisi

316

0,5 Kg 95°C 121x117

G 3/4” ø 6 mm 7 barMICROBOXER

ALU0,6 Kg 95°C 121x117

G 1” ø 6 mm 7 barBOXER 50 PP,

BOXER 81PP

1,5 Kg 60°C 177x170

G 1” ø 6 mm 7 bar

MINIBOXER Aisi 316,

BOXER 50 PVDF, BOXER

81 PVDF, BOXER 80 Aisi 316

1,7 Kg 95°C 177x170

G 1” ø 6 mm 7 bar

BOXER 50 ALU

BOXER 81ALU

1,7 Kg 95°C 177x170

G 1” 1/2 ø 6 mm 7 bar

BOXER 100 PP, BOXER

150 PP,BOXER 251

PP

3,8 Kg 60°C 283,2x254


EQU

AFL

UX

51

*EQ

UA

FLU

X 1

00

*EQ

UA

FLU

X 2

00

*

*Aisi 316 if requested

2222222www.debem.it

PVDF

PPPP

Aisi 316/ALU

PVDF

PP

PPS-V

PVDF

Product connection

Air connectionMax. air supply

pressureApplicability Weight

Max. operating temp.

Dimensionmm

G 1” 1/2 ø 6 mm 7 bar

BOXER 150 PVDF and Aisi 316, BOXER 251 PVDF

and Aisi 316,BOXER 100

PVDF and Aisi 316

4,5 Kg 95°C 283,2x254

G 1” 1/2 ø 6 mm 7 bar

BOXER 150 ALU, BOXER

251 ALU,BOXER 100

ALU

4,5 Kg 95°C 283,2x254

G 2” Ø 8 mm 7 barBOXER 502

PP23 Kg 60°C 398x516


PVDF28,5 Kg 95°C 398x516


ALU26 Kg 95°C 398x516


Aisi 31632 Kg 95°C 398x516


PP23 Kg 60°C 398x516


PVDF28,5 Kg 95°C 398x516



EQU

AFL

UX

20

0*

EQU

AFL

UX

30

2*

EQU

AFL

UX

30

3*

EQU

AFL

UX

20

0*

EQU

AFL

UX

30

2*

EQU

AFL

UX

30

3*

*Aisi 316 if requested

23

Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for fast fluid trans-fer and/or drainage with flow rates ranging from 6 to 75 m3/h. Their special open-impeller design allows pumping even with very dirty liquids having appar-ent viscosity up to 500 cps (at 20°C) and small suspended solids. There are two versions available with different internal mechanical seal depending on use, TL (lip seal) and TS (bellows seal).

Available in polypropylene, PVDF;

Positive suction head operation;

Weldless;

Mechanical lip or bellows seal;

Usable even with extremely dirty liquids;

Flow rates: from 6 to 75 m3/h;

Head: up to 38 mt;

Quick and easy maintenance;

Inexpensive spares.

Viscosity: up to 500 cps

European voltage motors: IP55 - F Class - 2-pole - 230/400 V 50 Hz - three-phase - 2900 RPM

pump motor power

MB 80 0.37 Kw - 0.5 HP

MB 100 0.55 Kw - 0.75 HP

MB 110 1.1 Kw - 1.5 HP

MB 120 1.5 Kw - 2 HP

MB 130 2.2 Kw - 3 HP

pump motor power

MB 140 3 Kw - 4 HP

MB 150 4 Kw - 5.5 HP

MB 155 5.5 Kw - 7.5 HP

MB 160 7.5 Kw - 10 HP

MB 180 11 Kw - 15 HP

A = electric motorB = inspection lanternC = mechanical sealD = impellerE = delivery ductF = intake duct

A B DCE F

HOW IT WORKSThe impeller is integral with the shaft and direct-drive electric motor and is rotated at a preset speed with the centrifugal effect producing suction on the intake side and dis-charge on the delivery side.

TL = lip seal TS = bellows seal

MBHORIZONTAL CENTRIFUGAL PUMPS

www.debem.it

Pump model

P

Pump material

P - PolypropyleneF - PVDF

N* - Three-phase motorM - Single-phase motorA - ATEX motor

COMPOSITION CODESex. MB80PTLVN MB 80 in PP +Viton lip seal + Three-phase motor

* Standard motor is the three-phase induction type with European voltage (2-pole) 50Hz

TLV - Viton lip sealTLD - EPDM lip seal TSV - Viton bellow sealTSD - EPDM bellow seal

MB 80 - MB 80 MB 100 - MB 100MB 110 - MB 110MB 120 - MB 120MB 130 - MB 130MB 140 - MB 140MB 150 - MB 150MB 155 - MB 155MB 160 - MB 160MB 180 - MB 180

Type of seal Motor

TLV NMB80

2422424www.debem.it

H (m) H (ft)

Q = U.S. g.p.m.

10

9

8

7

6

5

4

3

2

1

0

Q = m3/h10 2 3 4 5 6 7 8

32,8

29,5

26,2

22,9

19,6

16,4

13,1

9,8

6,5

3,2

0

4,40 8,8 13 17 22 26 30 35

PVDF

PVDF

MB 80

PP

PP

MB 80/100

MB 110/120

H (m)

Q = m3/h

03,2

6,5

9,8

13,1

16,4

19,6

22,926,2

29,5

32,8

36,0

39,3

01

2

3

4

5

6

78

9

10

11

12

1 2 3 4 5 6 7 8 9 100

4,4 8,8 13 17 22 26 30 35 39 440

H (ft)

Q = U.S. g.p.m.


model seal powerø passing

solidsA C E F G H L M N O P

KgPP

KgPVDF

MB80 TL-TS0.37 Kw 0.5 HP

5 328 47G 1” M or

DN25G 1” 1/2 f or DN 40

197 90 89 48 71 175 112 8,5 9,5

MB100TL-TS

0.55 Kw 0.75 HP

7 328 47G 1” M or

DN25G 1” 1/2 f or DN 40

197 90 89 48 71 175 112 8,5 9,5



KgPP

KgPVDF


2 406 75G 1” 1/2 M

or DN40G 2” M or

DN50247 100 130 40 80 191 125 16 17

MB120 TL-TS1.5 Kw 2 HP

6 426 75G 1” 1/2 M

or DN40G 2” M or

DN50257 100 130 40 90 210 140 16 17

GH

N

CA

E

F

P

O

M

L

Ø1404xØ8

N

HG

CA

F

E

4xØ10

M

L

P

Ø203

O

PP

PP

MB 100

H (m)

0123456789

101112131415161718

03,26,59,813,116,419,622,926,229,5

32,836,039,342,645,949,252,455,759,0

50 10 15 20 25 30 35

H (ft)

Q = m3/h

Q = U.S. g.p.m.220 44 66 88 110 132 154

H (m)

Q = m3/h

10

23456789

1011121314

17

1516

3,20

6,59,813,116,419,622,926,229,532,836,039,342,645,9

55,7

49,252,4

50 10 15 20 25 30

H (ft)

Q = U.S. g.p.m.

220 44 66 88 110 132MB 110 MB 120

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.



25www.debem.it

PVDF

PVDF

PP

PP

MB 150/155

MB 130/140

H (m)

Q = m3/h

6789

0 5 10 15 20 25 30 35

10111213141516171819202122

19,622,926,229,532,836,039,342,645,949,252,455,759,062,365,668,872,1

H (ft)

Q = U.S. g.p.m.

0 22 44 66 88 110 132 154


H (m)

Q = m3/h

4

6

8

10

12

14

16

18

20

22

24

13,1

19,6

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7

50 10 15 20 25 30 35 40 45

H (ft)

Q = U.S. g.p.m.

220 44 66 88 110 132 154 176 198

H (m)

Q = m3/h

8

10

12

14

16

18

20

22

24

26

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

100 20 30 40 50 60

H (ft)

Q = U.S. g.p.m.

440 88 132 176 220 264

H (m)

Q = m3/h

8

10

12

14

16

18

20

22

24

26

28

30

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

91,8

98,4

100 20 30 40 50 60 70

H (ft)

Q = U.S. g.p.m.

440 88 132 176 220 264 308



KgPP

KgPVDF

MB150 TL-TS4 Kw

5.5 HP2 527 68

G 2” M or DN50

G 2” 1/2 F or DN65

300 140 158 96 112 249 190 44 47


3 619 68G 2” M or

DN50G 2” 1/2 F or DN65

329 140 158 96 132 312 216 60 63



KgPP

KgPVDF

MB130 TL-TS2.2. Kw

3 HP6 448 75

G 1” 1/2 M or DN40

G 2” M or DN50

257 125 130 40 90 210 140 22,5 23,5

MB140 TL-TS3 Kw 4 HP

12 505 75G 1” 1/2 M

or DN40G 2” M or

DN50296 140 130 40 100 227 160 29 30

A

N

HG

C

4xØ12

Ø300

L

M

P

E

F

O

N

HG

CA

F

E

4xØ10

M

L

P

Ø203

O

PPPP

PP

MB 150

MB 130

MB 155

MB 140

MB 1304xØ12 MB 140

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

MB 150 Ø 275 - MB 155 Ø 300



2622626www.debem.it

H (m)

Q = m3/h

12

14

16

18

20

22

2426

28

30

32

34

36

38

40

42

39,3

45,9

52,4

59,0

65,6

72,1

78,785,3

91,8

98,4

104,9

111,5

118,1

124,6

131,2137,7

100 20 30 40 50 60 70 80 90

H (ft)

Q = U.S. g.p.m.440 88 132 176 220 264 308 352 396

H (m)

Q = m3/h

12

14

16

18

20

22

24

26

28

30

32

34

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

91,8

98,4

104,9

111,5

100 20 30 40 50 60 70

H (ft)

Q = U.S. g.p.m.

440 88 132 176 220 264 308

PVDF PP

MB 160/180



KgPP

KgPVDF

MB160 TL-TS7.5 Kw 10 HP

9 645 68G 2” M or

DN50G 2” 1/2 F or DN65

335 140 158 96 132 310 216 70 73

MB180 TL-TS11 Kw 15 HP

9 695 68G 2” M or

DN50G 2” 1/2 F or DN65

335 178 158 96 132 310 216 96 99

A

N

HG

C

4xØ12

Ø300

L

M

P

E

F

O

PPPP

MB 160 MB 180


PUMP-PROTECTING BASKET STRAINERSPolypropylene build, no metal parts and low head loss make them ideal for installation on a pump suction port, providing protection from suspended solids, filaments, algae, etc. The strainer can be easily removed by unscrewing the lid without the need for tools.

Max. operating pressure 1 bar for chemical sector, water treatment plants, fish farming, the galvanising, tanning, textile, paper and printing industries and a host of other applications.Available in five different connection sizes: 1”, 1 1/2”, 2”, 2 1/2”, 3”

400

330 INLET 3" GASDELIVERY 3" GAS

417

2

72

17

19

245

207

270

12,50

235

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.


27www.debem.it

components material

1 ShaftAlumina Ceramics 99,7%

2Thrust bearing washer

PTFE + 30% Graphite

3 Bearing PTFE + 30% Graphite

4 O-ring VITON/EPDM

5 Impeller PP/PVDF+CF

6 Pump Casing PP/PVDF+CF

7Head thrust bearing washer

Alumina Ceramics 99,7%

DMMAGNETIC DRIVE CENTRIFUGAL PUMPS

5

3

1

2

4

6 7

INSTALLATIONDM magnetic drive centrifugal pumps should only be in-stalled with the shaft positioned horizontally in a positive suction head arrangement.Suitable devices should be fitted to prevent dry run-ning and the formation of a vortex and possible air suc-tion. Horizontal centrifugal pumps should only operate WHILST FILLED.

A couple of magnets leads the operation of the pump; the outer magnet placed on the drive shaft transmits the mo-tion to the inner magnet integrated with the impeller that is hermetically insulated. The pump impeller is not physically fixed to the drive shaft, seals are therefore eliminated and this consequently avoids leakages of the liquid drawn by the pump which are usually due to its wear and tear. The pump head is manufactured with few components, thus the main-tenance of which becomes extremely easy. The materials used as standard are polypropylene (pp) and polyvinylidene fluoride (pvdf). The pumps can’t run dry. Dirty liquids can reduce the pump life Working temperatures: PP min - 10°C/max 65°C PVDF min - 10°C/max 90°C.

DEBEM pumps are succesfully suitable for many different application fields such as: laboratory technique, medical equipments, photo processors, x rays film processors, la-ser beam systems, metal finishing machines, graphics, heat exchangers, aquariums, water treatment, filter units, chemi-cal industry, galvanic industry.

Pump model

DM10 071P

Pump body

P - PolypropyleneFC - PVDF +Cf

D - EPDMV - Viton®

DM04

DM06

DM10

DM15

DM30

DM04

DM06

DM10

DM15

DM30

1=Ø 782=Ø 683=Ø 581=Ø 812=Ø 703=Ø 651=Ø 982=Ø 853=Ø 701=Ø 1232=Ø 1083=Ø 901=Ø 1342=Ø 1023=Ø 110

056

063071

071080

090

090100112

N - NPT B - BSP

E - MECU - NEMA

COMPOSITION CODESex. DM10P-SD1NE071DM10 in PP +Standard Thrust washer + Epdm O-Ring + Impeller Ø 98 + NPT connection + Mec Motor Flange + Motor Casing 071

S - Standard(ceramic + PTFE Graphite)

DM04DM06DM10DM15DM30

S D 1 N E

Thrust washer O Rings Impeller Connection MotorFlange

Motor Casing

2822828www.debem.it

DM

DM04

DM06

MAGNETIC DRIVE CENTRIFUGAL PUMPS in PP - PVDF

(U.S. gpm)

Ø58

Ø68

Ø78

0 5 10 15

(m)

Q

H

(ft)

H

0

1

2

3

4

5

6

7

8

0

5

10

15

20

25

Q (m 3/h)0 1 2 3

(U.S. gpm)

Ø65

Ø70

Ø81

0 5 10 15 20 25 30

(m)

Q

H

(ft)

H

0

1

2

3

4

5

6

7

8

0

5

10

15

20

25

Q (m 3/h)0 1 2 3 4 5 6

girante/impeller

ø 78 mm

ø 68 mm

ø 58 mm

motor 0.12 kW (0.16Hp)

up to 1 up to 1,3

up to 1,3 up to 1,6

up to 1,6 up to 1,8

motor 0.15 kW (0.20Hp)

IMPELLER SELECTION/SPECIFIC GRAVITY

girante/impeller

ø 81mm

ø 70 mm

ø 65 mm

motor 0,25 kW (0.35Hp)

up to 1,2 up to 1,8

up to 1,5 up to 2

up to 1,8 up to 2



PP

PP

PVDF

PVDFPPPP

model motor size power A B C E F G H L M N O PKgPP

KgPVDF

DM06 IEC 63 0,25 Kw 383 325 58 3/4” M* 1” F* 211 80 27 46 63 91 100 6,7 7

DM06 IEC 71 0,37 Kw 404 346 58 3/4” M* 1” F* 217 90 27 46 71 91 112 7,5 7,8

DM06 NEMA 56C 0,5 Hp 436 377 58 3/4” M* 1” F* 228 90 27 46 89 91 112 - -

G

A

C

E

B

F

H

N

O

M L

P

Ø 1

14

4 holeØ 5,8

G

A

C

E

B

F

H

N

O

M L

P

Ø 1

46

4 holeØ 7

*gas bsp or npt

*gas bsp or npt


KgPVDF

DM04 IEC 56 0,12 Kw 275 234 40 1/2” M* 1” F* 154 71 23 34 56 78 90 4,4 4,8

DM04 IEC 56 0,15 Kw 275 234 40 1/2” M* 1” F* 154 71 23 34 56 78 90 4,4 4,8

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.



29www.debem.it

DM10

PP PVDFPPPP

G

A

C

E

B

F

H

N

O

M L

P

Ø 1

46

4 holeØ 7, 10, 7, 7


KgPVDF

DM10 IEC 71 0,55 Kw 417 349 68 1” M* 1”1/2 F* 229 90 25 47 71 91 112 8,6 9

DM10 IEC 80 0,75 Kw 459 391 68 1” M* 1”1/2 F* 346 100 25 47 80 91 125 10,6 11

DM10 NEMA 56C 0,75 Hp 448 380 68 1” M* 1”1/2 F* 240 90 25 47 89 91 112 - -

DM10 NEMA 143TC 1,00 Hp 482 414 68 1” M* 1”1/2 F* 245 90 25 47 89 91 112 - -

0

0

(m)

Q

H

5

0

10

(U.S. gpm)

(ft)

H

10

15

5 10 15 20 25 30 35 40 45 50 55

20

30

40

50

Ø98

Ø85

Ø70

0

(m 3/h)

1 2 3 4 5 6 7 8 9 10 11 12 13

Q

girante/impeller

ø 98 mm

ø 85 mm

ø 70 mm


up to 1,1 up to 1,5

up to 1,6 up to 2

up to 2 up to 2

motor 0,75 kW (1Hp)


DM015

PP PVDF

G

A

C

E

B

F

H

N

O

M L

P

Ø 1

95

4 holeØ 10, 8.73

*gas bsp or npt

*gas bsp or npt

DMMAGNETIC DRIVE CENTRIFUGAL PUMPS in PP - PVDF

PP

60 1004030

Q

5

50 8070 90

H

10

15

0

10

20

20

30

40

50

60

11020

Ø90

0

(U.S. gpm)

0

(m)

Ø108

Ø123

(ft)

H

10

5 15 20 250

Q (m 3/h)

10

girante/impeller

ø 123 mm

ø 108 mm

ø 90 mm

motor 2,2 kW (3Hp)

up to 1,8 up to 1,1

up to 2up to 1,6

up to 2 up to 2

motor 1,5 kW (2Hp)



KgPVDF

DM15 IEC 90 1,5 Kw 489 408 81 1”1/4 M* 1”1/2 F* 298 125 35 62 90 125 140 - -

DM15 IEC 90 2,2 Kw 489 408 81 1”1/4 M* 1”1/2 F* 298 125 35 62 90 125 140 - -

DM15 NEMA 145 TC 3 Hp 530 449 81 1”1/4 M* 1”1/2 F* 327 127 34 62 88 125 139 - -

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.



303303030www.debem.it

ACCESSORIESSTROKE COUNTER

AIR REGULATOR KIT

BATCH CONTROLLER

FLANGES

Devices that are fitted to the pneumatic circuit of diaphragm pumps. They can count the number of strokes made by the diaphragms and therefore the number of cycles. This device allows various types of monitoring, e.g. litres of liquid delivered by the pump as a function of its displacement capacity and it also allows the control of the pump running at distance.

Mechanical batch controller with 5-digit display and start/stop button. Pneumatic operation, no electrical connection required.Designed for CUBIC and BOXER series.

It is composed of a compressed air filter regulator, fixing bracket, gauge, Elaston tube (5 m) cock and fittings.

Check valves designed for vertical fitting at the bottom end of the suction pipe on both centrifugal and pneumatic pumps. These non-return valves prevent water from flowing out of the suction pipe so that the pump remains primed at all times.Sizes available: 1”, 1¼”, 1½”, 2”, 3”.Construction materials: PP and PVDF

FOOT VALVES

TROLLEY FOR BOXER PUMPS

BOXER series.

The pump is blocked through fixing holes

DM30

PP PVDF

G

A

C

E

B

F

H

N

O

M L

P

Ø 1

95

4 holeØ 10, 12, 12, 8.73, 10.3

PP

0

0

(m)

Q

H

5

10

0

10

100

10

(U.S. gpm)

(ft)

H

15

20

25

30

20

30

40

50

70

60

80

90

20 30 40 50 60 70 80 90 100 120110 130 140 150

Ø134

Ø122

Ø110

0 100.0

Q (m 3/h)

0.05 15 20 25 30 35

girante/impeller

ø 134 mm

ø 122 mm

ø 110 mm

motor 2,2 kW (3Hp)

up to 1,1 up to 1,5

up to 1,4 up to 2

up to 1,8 up to 2

motor 3 kW (4Hp)

up to 1,8

up to 2

up to 2

motor 4 kW (5.5Hp)



KgPVDF

DM30 IEC 90 2,2 Kw 499 408 91 1”1/2 M* 2 F* 308 125 31 66 90 140 140 - -

DM30 IEC 100 3 Kw 524 433 91 1”1/2 M* 2 F* 315 140 31 66 100 140 160 - -

DM30 IEC 112 4 Kw 549 458 91 1”1/2 M* 2 F* 322 140 31 66 112 140 190 - -

DM30 NEMA 145TC 3 Hp 541 450 91 1”1/2 M* 2 F* 337 127 31 66 88 140 139 - -

DM30 NEMA 184TC 5 Hp 608 517 91 1”1/2 M* 2 F* 328 139 31 66 114 140 190 - -

DMMAGNETIC DRIVE CENTRIFUGAL PUMPS in PP - PVDF

*gas bsp or npt

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.


31www.debem.it

IMVERTICAL CENTRIFUGAL PUMPS

The IM series of resin-encased vertical centrifugal pumps features high-performance pumps for fixed installations with pump immersed directly in the tank and operated by a direct-drive electric motor (max 3000 rpm) for fast fluid drainage with flow rates ranging from 6 to 75 m3/h and head up to 38 mt. The special design of this type of pump avoids the use of internal mechanical seals (subject to heavy wear) and ensures that any accidental spillages are collected in the tank.The open impeller allows continuous pumping even with very dirty liquids having apparent viscosity of up to 500 cps (at 20°C) and small suspended solids.The choice of pump construction materials allows selection of optimum chemical compatibility with the fluid and/or environment without neglecting the temperature range.

Construction materials: PP, PVDF;

Pump immersed in the tank;

Motor removable even with pump installed;

Weldless;

Usable even with extremely dirty liquids;

High flow rates: from 6 to 75 m3/h;

Motor replaceable without dismantling pump;

User-friendly bushing replacement;

Quick and easy maintenance;

Fully-removable;

Also available without motor;

Max. head: 7,2 ÷ 38 m

Viscosity: up to 500 cps

European voltage motors: IP55 - F Class - 2-pole - 230/400 V 50 Hz - three-phase - 2900 RPM

Column length (L): 500/800/1000/1250 mm

pump motor power

IM 80 0.37 Kw - 0.5 HP

IM 90 0.55 Kw - 0.75 HP

IM 95 0.75 Kw - 1 HP

IM 110 1.1 Kw - 1.5 HP

IM 120 1.5 Kw - 2 HP

IM 130 2.2 Kw - 3 HP

IM 140 3 Kw - 4 HP

IM 150 4 Kw - 5.5 HP

IM 155 5.5 Kw - 7.5 HP

IM 160 7.5 Kw - 10 HP

IM 180 11 Kw - 15 HP

A

BC

G

D

F

H

I

M

L

E

HOW IT WORKS

The impeller is integral with the shaft and direct-drive electric motor and is rotated at a preset speed with the centrifugal effect producing suction on the intake side and discharge on the delivery side.

A = electric motorB = drive couplingC = lanternD = radial bearingE = outer columnF = shaft sleeveG = ceramic bushingH = impellerI = delivery ductL = intake ductM = bushing

Pump model

P

Pump material

P - PolypropyleneF - PVDF

0250 - 250 mm**0500 - 500 mm0800 - 800 mm1000 - 1000 mm1250 - 1250 mm

N* - Three-phase motorM - Single-phase motorA - ATEX motor

COMPOSITION CODESex. IM95PV0800N IM95 in PP + 0 RING Viton + column length 800 + Three-phase motor

* Standard motor is the three-phase induction type with European voltage (2-pole) 50Hz - ** only available for IM 80/90 pumps

D - EPDM V - Viton

IM 80 - IM 80IM 90 - IM 90 IM 95 - IM 95IM 110 - IM 110IM 120 - IM 120IM 130 - IM 130IM 140 - IM 140IM 150 - IM 150IM 155 - IM 155IM 160 - IM 160IM 180 - IM 180

0 RING Column length Motor

V 0800 NIM95



H (m) H (ft)

Q = U.S. g.p.m.

10

9

8

7

6

5

4

3

2

1

0

Q = m3/h10 2 3 4 5 6 7 8

4,40 8,8 13 17 22 26 30 3532,8

29,5

26,2

22,9

19,6

16,4

13,1

9,8

6,5

3,2

0

H (m)

Q = m3/h

1

0

23456789

10111213141516

3,20

6,59,813,116,419,622,926,229,532,836,039,342,645,949,252,4

50 10 15 20 25

220 44 66 88 110

H (ft)

Q = U.S. g.p.m.

H (m)

Q = m3/h

03,2

6,5

9,8

13,1

16,4

19,6

22,926,2

29,5

32,8

36,0

39,3

01

2

3

4

5

6

78

9

10

11

12

1 2 3 4 5 6 7 8 9 100

4,4 8,8 13 17 22 26 30 35 39 440

H (ft)

Q = U.S. g.p.m.

H (m)

0123456789

101112131415161718

03,26,59,813,116,419,622,926,229,5

32,836,039,342,645,949,252,455,759,0

50 10 15 20 25 30 35

220 44 66 88 110 132 154

H (ft)

Q = m3/h

Q = U.S. g.p.m.

IM 110

IM 120

PP

PP

PVDF

PVDF

IM 80/90

IM 95/110/120

model powerø passing

solidsA B C D E F G H I M N O P

Kgmotor

IM800.37 Kw 0.5 HP

7 340 164 20 100 340 130 119 91 260 290 119 210 Ø140 8

IM900.55 Kw 0.75 HP

10 340 164 20 100 340 130 119 91 260 290 119 210 Ø140 8



Kgmotor

IM950.75 Kw

1 HP6 419 210 25 125 360 135 165 60 300 310 165 250 Ø203 12

IM1101.1 Kw 1.5 HP

6 419 210 25 125 360 135 165 60 300 310 165 250 Ø203 13

IM1201.5 Kw 2 HP

6 446 220 25 125 360 135 165 60 300 310 165 250 Ø203 17

IM 80

IM 95

IM 90

IM 110/120

G

E

I

FH

130

43

P

L

D

A

G 1'' m

C

B

45

L1

G 1 1/2'' f

M

13

O

N

CA

B

L

L1

D

G 1" 1/2 m

G 2" m

50

F G H

M

E

150

O

I

Ø65

P

N

13

L

column

Weight

PP

Weight

PVDF

L1

max

250 6,5 Kg 7 Kg 100

500 7,5 Kg 8 Kg 350

800 10,5 Kg 11 Kg 650

L

column

Weight

PP

Weight

PVDF

L1

max

500 15 Kg 16 Kg 300

800 19 Kg 20 Kg 600

1000 22 Kg 23 Kg 800

1250 24 Kg 25 Kg 1050

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.



33www.debem.it

L

column

Weight

PP

Weight

PVDF

L1

max

500 28 Kg 30 Kg 300

800 31 Kg 33 Kg 600

1000 33 Kg 35 Kg 800

1250 36 Kg 38 Kg 1050

L

column

Weight

PP

Weight

PVDF

L1

max

500 15 Kg 16 Kg 300

800 19 Kg 20 Kg 600

1000 22 Kg 23 Kg 800

1250 24 Kg 25 Kg 1050

H (m)

Q = m3/h

6789

0 5 10 15 20 25 30 35

0 22 44 66 88 110 132 154

10111213141516171819202122

19,622,926,229,532,836,039,342,645,949,252,455,759,062,365,668,872,1

H (ft)

Q = U.S. g.p.m.

H (m)

Q = m3/h

8

10

12

14

16

18

20

22

24

26

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

100 20 30 40 50 60

440 88 132 176 220 264

H (ft)

Q = U.S. g.p.m.

H (m)

Q = m3/h

4

6

8

10

12

14

16

18

20

22

24

13,1

19,6

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7220 44 66 88 110 132 154 176 198

50 10 15 20 25 30 35 40 45

H (ft)

Q = U.S. g.p.m.

H (m)

Q = m3/h

8

10

12

14

16

18

20

22

24

26

28

30

26,2

32,8

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

91,8

98,4440 88 132 176 220 264 308

100 20 30 40 50 60 70

H (ft)

Q = U.S. g.p.m.

IM

PP

PP

PVDF

PVDF

IM 130/140

IM 150/155



Kgmotor

IM1302.2 Kw 3 HP

6 467 220 25 125 360 135 165 60 300 310 165 250 Ø203 20

IM1403 Kw 4 HP

12 507 235 25 120 360 135 165 60 300 310 165 250 Ø203 34



Kgmotor

IM1504 Kw

5.5 HP2 532 233 25 132 480 170 215 95 380 430 215 330 Ø275 36

IM1555.5 Kw 7.5 HP

2 682 303 25 130 480 170 215 95 380 430 215 330 Ø275 53

IM 130

IM 150

IM 140

IM 155

CA

B

L

L1

D

G 1" 1/2 m

G 2" m

50

F G H

M

E

150

O

I

Ø65

P

N

13

CA

B

L

L1

D

G 2" m

G 2" 1/2 f

50

F G H

M

E

150

O

I

Ø80

P

N

13

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.




L

column

Weight

PP

Weight

PVDF

L1

max

500 31 Kg 33 Kg 300

800 34 Kg 36 Kg 600

1000 36 Kg 38 Kg 800

1250 39 Kg 41 Kg 1050


H (m)

Q = m3/h

12

14

16

18

20

22

24

26

28

30

32

34

39,3

45,9

52,4

59,0

65,6

72,1

78,7

85,3

91,8

98,4

104,9

111,5

100 20 30 40 50 60 70

440 88 132 176 220 264 308

H (ft)

Q = U.S. g.p.m.

H (m)

Q = m3/h

12

14

16

18

20

22

2426

28

30

32

34

36

38

40

42

39,3

45,9

52,4

59,0

65,6

72,1

78,785,3

91,8

98,4

104,9

111,5

118,1

124,6

131,2137,7

100 20 30 40 50 60 70 80 90

440 88 132 176 220 264 308 352 396

H (ft)

Q = U.S. g.p.m.

PP

PVDF

IM 160/180



Kgmotor

IM1607.5 Kw 10 HP

9 702 303 25 130 480 170 215 95 380 430 215 330 Ø275 61

IM18011 Kw 15 HP

11 752 303 25 130 480 170 215 95 380 430 215 330 Ø275 71

IM 160 IM 180

CA

B

L

L1

D

G 2" m

G 2" 1/2 f

50

F G H

M

E

150

O

I

Ø80

P

N

13

The

curv

es a

nd p

erfo

rman

ce v

alue

s re

fer

to p

umps

spa

re d

eliv

ery

outle

t an

d w

ater

at

20

°C.


35www.debem.it

TRTRANSFER PUMPS

These portable drum-transfer immersion pumps are designed to pump corrosive liquids. Their special shape ensures that any spillages are collected in the drum.Available with fully-interchangeable electric or pneumatic motor, these pumps have an open impeller that allows continuous pumping of clean corrosive liquids having apparent viscosity of up to 600 cps with 500-watt electric and pneumatic motor (at 20°C) and 900 cps with 800-watt electric motor (at 20°C). TR-EL series pumps driven by an electric motor are also fitted with a safety cut-out switch that prevents accidental restart after a power outage.

Available in PP, PVDF e Aisi 316

Inexpensive;

Portable; Handles corrosive liquids;

Viscosity up to 900 cps;

Available with either electric or pneumatic motor;

Adjustable flow rate (pneumatic version);

No mechanical seals;

Easily dismantled;

Dip tube length = 900 mm or 1200 mm;

Flow rate up to 90 l/min.

A = drive couplingB = motor ring nut C = bearingD = delivery ductE = dip tubeF = PTFE bushingG = impellerH = suction port

I = shaft

A

BC

G

D

F

H

I

E

HOW IT WORKS

The impeller is integral with the shaft and coupled to the electric or pneuma-tic motor that makes it rotate, thus creating the centrifugal effect.

TR-PN TR-EL

DESCRIPTION OF THE PUMPS

These drum transfer pumps consist of a dip tube the end of which houses the open impeller that is secured to the driveshaft connected to the pump by means of a ring nut, whilst transmission is provided by a shaft coupling.

INSTALLATION

TR drum transfer pumps should only be used with the shaft positioned vertically and the pump immersed in the drum, whilst liquid must be present. Running dry or with air bubbles can cause damage to the internal shaft guide bushing.

COMPOSITION CODESex. TRP1200EL TR in PP + Suction hose length 1200 + Electric motor

* Standard electric motor is single-phase 50/60Hz

Pump model

P

Material Pump

P - PolypropyleneF - PVDF A - Aisi 316

EL* - Electric motorPN - Pneumatic motor

0900 (900 mm) 1200 (1200 mm)

TR - TRANSFER PUMPS

Suction hose length Motor

1200 ELTR


TR PUMPSconstruction materials: PP - PVDF - ALU - Aisi 316

Suction hose ø 42 mm

Hose clamp ø 25 mm

Max. temp. 60°C

Total Weight Kg 1,4/1,7

Suct. hose mat. PP

Shaft material HASTELLOY or Aisi316

Bushing material PTFE

Rotor material ECTFE

Intake port. mat. PP

Internal parts PP+PTFE

Lenght 900/1200

Suction hose ø 40 mm

Hose clamp ø 25 mm

Max. temp. 95°C


Suct. hose mat. PVDF

Shaft material HASTELLOY



Intake port. mat. ECTFE

Internal parts PVDF+PTFE

Lenght 900/1200

Suction hose ø 42,5 mm

Hose clamp ø 25 mm

Max. temp. 95°C


Suct. hose mat. Aisi 316

Shaft material Aisi 316




Internal parts PTFE+PPS-V

Lenght 900/1200


Hose clamp ø 25 mm

Max. temp. 95°C


Suct. hose mat. ALU

Shaft material Aisi316





Lenght 900/1200


Hose clamp ø 25 mm

Max. temp. 95°C

Total Weight Kg 3/4,4/5,3

Suct. hose mat. Aisi 316

Shaft material Aisi 316





Lenght 700/1000/1200

TRP BODY PP TRF BODY PVDF

TRA BODY AISI 316 TRL BODY ALUMINIUM

TRAX

All the values shown are approximate and not binding

BODY AISI 316PTB 03 ATEX 400X II1/2 GB IIB T4

326

45

24,5

900/

1200

42,4

1/4'' G

120

93

DELIVERY

AIR CONNECTION

SUCTION HOSE

464

24,5

900/

1200

42,4

45

196

132

DELIVERY

SUCTION HOSE

DIM

EN

SIO

NS

37www.debem.it

TR - MOTORSTRANSFER PUMPS

PNEUMATIC MOTOR

ELECTRIC MOTOR 800 WELECTRIC MOTOR 500 W

ELECTRIC MOTOR 550W

Motor power 0,33 HP at 7bar

Flow rate 80 l/min

Viscosity 600 cps

Weight Kg 1,1

Motor power 0,33 HP at 7bar

Flow rate 80 l/min

Viscosity 600 cps

Weight Kg 3

Motor power 500 watt

Motor voltage 230 V/115V* single phase

Motor protection IP 54

Motor class F

Flow rate 80 l/min

Viscosity 600 cps

Weight Kg 3,7


Motor voltage 230 V single phase


Motor class F

Flow rate 90 l/min

Viscosity 900 cps

Weight Kg 3,7


Motor voltage 230 V single phase


Motor class F

Flow rate 80 l/min

Viscosity 600 cps

Weight Kg 11

II 2 G EEx de IIA T6with earth cable and EX plug

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE

PE

RF

OR

MA

NC

EP

ER

FO

RM

AN

CE





The curves and performance values refer to pumps spare delivery outlet and water at 20°C.

0 10 20 30 40 50 60 70 80 90 100

U.S. g.p.m.

0

0

2

4

6

8

10

2,6 5,2 7,9 10,5 13,2 15,8 18,4 21,1 23,7 26,412

0

6,5

13,1

19,6

26,2

32,8

39,3

Hea

dH

ead

Hea

dH

ead

*on

req

uest

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

U.S. g.p.m.

0

0 1,3

2

4

6

8

10

2,6 3,9 5,2 6,6 7,9 9,2 10,5 11,8 13,2 14,5 15,8 17,1 18,4 19,8 21,1 22,4 23,7

12

14

16

0

6,5

13,1

19,6

26,2

32,8

39,3

45,9

52,4

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

U.S. g.p.m.

0

0 1,3

2

4

6

8

10

2,6 3,9 5,2 6,6 7,9 9,2 10,5 11,8 13,2 14,5 15,8 17,1 18,4 19,8 21,1 22,4 23,7

12

14

16

0

6,5

13,1

19,6

26,2

32,8

39,3

45,9

52,4

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

U.S. g.p.m.

0

0 1,3

2

4

6

8

10

2,6 3,9 5,2 6,6 7,9 9,2 10,5 11,8 13,2 14,5 15,8 17,1 18,4 19,8 21,1 22,4 23,7

12

14

16

0

6,5

13,1

19,6

26,2

32,8

39,3

45,9

52,4

II 2GD c IIC T6 (80°C) X


ACCESSORIES

DIP TUBE FILTER PP - INOX

It is made in polypropylene and inox and allows fluids to be filtered at the intake. For TR pumps only.

Flow meters are fitted exclusively to centrifugal or drum-transfer pumps and can measure either the pump’s instantaneous flow rate or the total number of litres of liquid delivered. The reading appears on the incorporated display.

FLOW METERS PP - PVDF

QUICK COUPLINGS

For the chemical industry, high resistance,suitable for reinforced hoses.Max. pressure 13 bar.

Food-grade pvc construction with metal reinforcement for suction/discharge.

REINFORCED HOSE

DISPENSER PP - ALU - INOX

High-strength clamps for

spiralled hose

T-BOLTCLAMPS

Made in polypropylene, aluminium alloy,

stainless steel and equipped with delivery

trigger.

39www.debem.it

MIXERS

series “F”

Fixed mixer with internal stand and locking device for fitting to an open or partially-covered tank.Designed for the water treatment sector, irrigation, etc. These mixers can handle products with a maximum density of 40°Bé and viscosity not exceeding 1.500 cps at atmospheric pressure.

series “H”

series “J”

TYPE Kw R.P.M. voltageshaft mm

Ø impeller mm

shaft and impeller

supportsupportAISI 304

weightKg

F-0850-2 0,25 940220/380220 S.ph.

850 120INOX

AISI 316PVC - 10,4

F-1000-2 0,25 940220/380220 S.ph.

1.000 120INOX

AISI 316PVC - 11

F-1200-2 0,25 940220/380220 S.ph.

1.200 120INOX

AISI 316PVC - 11,5

F-85 S-35 0,25 940220/380220 S.ph.

850 120INOX

AISI 316-

INOX 35 cm

11

F-10 S-35 0,25 940220/380220 S.ph.

1.000 120INOX

AISI 316-

INOX 35 cm

13

F-10 S-90 0,25 940220/380220 S.ph.

1.000 120INOX

AISI 316-

INOX 90 cm

16

F-12 S-35 0,25 940220/380220 S.ph.

1.200 120INOX

AISI 316-

INOX 35 cm

14

F-15 S-90 0,25 940220/380220 S.ph.

1.500 120INOX

AISI 316-

INOX 90 cm

16


Ø impeller mm

shaft and impeller

supportAISI 304

weightKg

H-10 S-35 0,55 940220/380220 S.ph.

1.000 160INOX

AISI 316INOX

35 cm16

H-10 S-90 0,55 940220/380220 S.ph.

1.000 160INOX

AISI 316INOX

90 cm20

H-12 S-35 0,55 940220/380220 S.ph.

1.200 160INOX

AISI 316INOX

35 cm17

H-12 S-110 0,55 940220/380220 S.ph.

1.200 160INOX

AISI 316INOX

110 cm21

H-15 S-90 0,55 940220/380220 S.ph.

1.500 160INOX

AISI 316INOX

90 cm21

H-15 S-140 0,55 940220/380220 S.ph.

1.500 160INOX

AISI 316INOX

140 cm24

H-18 S-170 0,55 940220/380220 S.ph.

1.800 160INOX

AISI 316INOX

170 cm26

H-20 S-190 0,55 940220/380220 S.ph.

2.000 160INOX

AISI 316INOX

190 cm27


Ø impeller mm

shaft and impeller

supportAISI 304

weightKg

J-12 S-110 1,1 940220/380220 S.ph.

1.200 200INOX

AISI 316INOX

110 cm26,5

J-15 S-140 1,1 940220/380220 S.ph.

1.500 200INOX

AISI 316INOX

140 cm28

J-18 S-170 1,1 940220/380220 S.ph.

1.800 200INOX

AISI 316INOX

170 cm30

J-20 S-190 1,1 940220/380220 S.ph.

2.000 200INOX

AISI 316INOX

190 cm32

Usable in cylindrical drums of a max. 3000 litres capacity.



NOTE: Only the mixers in PP and PVDF have the opportunity to run dry.

4044040www.debem.it

MIXERSIN PP OR PVDF - series “E” and series “EH”


Ø impeller mm

coatedshaft

impellerweight

Kg

E-600-4 0,11 940220 S.ph.220/380

600 125PP or PVDF

PP or PVDF

5

E-800-4 0,11 940220 S.ph.220/380

800 125PP or PVDF

PP or PVDF

5,5

E-1000-4 0,25 940220 S.ph.220/380

1.000 140PP or PVDF

PP or PVDF

10,5

E-1200-4 0,25 940220 S.ph.220/380

1.200 140PP or PVDF

PP or PVDF

11

EH-1200-4 0,55 940220 S.ph.220/380

1.200 160PP or PVDF

PP or PVDF

14,5

EH-1400-4 0,55 940220 S.ph.220/380

1.400 160PP or PVDF

PP or PVDF

15

PP and PVDF mixers for processing acids. No stand with locking device for tank instal-lation. Watertight, this being achieved by means of a fixed ceramic part and V-ring seal in the top section and an O-ring fitted to the bolt-on impeller. Series E L. 600/800 mm usable in cylindrical drums of a max. 400 litres capacity. Series E L. 1000/1200 mm usable in cylindrical drums of a max. 1000 litres capacity. Series EH usable in cylindrical drums of a max. 3000 litres capacity.

series “RV”

series “RV”

series “RV”

TYPE Kw R.P.M.shaft mm

valueØ impeller

mmmaterial

weightKg

RV-0850-20 0,18 193 850 1:7,5 200 AISI 316 10

RV-0850-30 0,25 291 850 1:5 200 AISI 316 11

RV-1000-05 0,25 49 1000 1:30 600 AISI 316 11,5

RV-1000-20 0,18 193 1000 1:7,5 200 AISI 316 10,5

RV-1000-30 0,25 291 1000 1:5 200 AISI 316 11,5

RV-1200-05 0,25 49 1200 1:30 600 AISI 316 12

RV-1200-20 0,18 193 1200 1:7,5 200 AISI 316 11

RV-1200-30 0,25 291 1200 1:5 200 AISI 316 12

TYPE Kw R.P.M.shaft mm

valueØ impeller

mmmaterial

weightKg

RV-12 S-35-05 0,25 49 1200 1:30 600 AISI 316 10

RV-12 S-35-20 0,18 193 1200 1:7,5 200 AISI 316 11

RV-12 S-35-30 0,25 291 1200 1:5 200 AISI 316 11

RV-15 S-90-05 0,25 49 1500 1:30 600 AISI 316 10,5

RV-15 S-90-20 0,18 193 1500 1:7,5 200 AISI 316 11,5

RV-15 S-90-30 0,25 291 1500 1:5 200 AISI 316 12

Low-speed agitator with crown and worm reduction unit.The Aisi 316 stainless steel shaft is coupled with a pin inside the hallow shaft of the agitator.They are intended for homogenezing and flocculation processes.Fit with a flange to be applied on opened or semiclosed containers.

Without support

With support

As an optional, the series RV agitators equipped with support can be supplied with a height equal to 1800 mm and 2000 mm.

41www.debem.it

MIXERS

AISI 316PPPVDF

IN INOX AND PP WITH GEAR DRIVE - series “FR”

TYPE HP R.P.M. voltageshaft mm

Ø impeller shaft and impeller

weightKg

FR-1000-12 0,09 118220 S.ph.220/380

1.000 160INOX

AISI 3168,5

FR-1200-12 0,09 118220 S.ph.220/380

1.200 200INOX

AISI 3169

FR-1000-86 0,09 86220 S.ph.220/380

1.000 200INOX

AISI 3168,5

FR-1200-86 0,09 86220 S.ph.220/380

1.200 200INOX

AISI 3169

FR-1000-35 0,09 35 220/380 1.000 600INOX

AISI 3168,5

FR-1200-35 0,09 35 220/380 1.200 600INOX

AISI 3169

FR-1000-12PP 0,09 118220 S.ph.220/380

1.000 160 PP 8,5

FR-1200-12PP 0,09 118220 S.ph.220/380

1.200 160 PP 9

Fixed mixer without stand for installation above open or partially-covered vessels.2- or 3-stage reduction gearbox for slower rotation speeds. For a very slow mixing of fluids (e.g.: non foaming fluids). It is utilized for very small drums.

4244242www.debem.it

PERISTALTIC PUMPSThe peristaltic pump’s operation is obtained through a “flow pressure” which acts on a flexible pipe; such flow pressure is exercised by some rollers which turn parallel to the axis, supported by a roller holder. The slow rotary motion of the roller holder support is transmitted by a two or three passages motor reducer at 35, 86 or 141 rpm’s, equipped with a 0.09 KW (1/8 CV) MEC-56 electric motor with a continuous service speed of 1450 rpm’s. The inner part of the pump’s body and the roller holder are lathed with a precision tolerance, individually gauged during assembly and during the subsequent inspection in order to distribute a uniform pressure on the pipe-membrane, thus guaranteeing a perfect self-priming and a longer life of the pipe-membrane. There are no valves or shutters. The NORTON pipes are extruded with a high precision in order to avoid occlusions and to obtain a lesser volumetric yield. Easy to clean and maintain. Very sturdy construction, alu-casting pump body, painted with epoxy resin. Anodized aluminum roller holder, over dimen-sioned axes and bearings. Maximum suction height: about 8 meters with a pipe up to Ø 12.7 mm., and about 6 meters with a Ø 15.9 mm pipe. Maximum allowed pressure for the pipe: 1.4 Kg/cm2. Maximum temperature 60°C. These pumps can pump viscous liquids with suspended particles, without any damage. They withhold the liquid within their passage, they prevent liquid reflux and the “siphon” effect. The may work under dry conditions and invert the sense or rotation.

The 35 rpm speed is suitable for highly viscous liquids (polyelectrolyte) or for liquids which must remain unaltered (high quality wines).

MP is a device which applies the peristalsis principle whereby the total head of the treated fluid is given by a constriction running along the tube. The materials used have a high chemical com-patibility with solvents, acids, inks, paints, etc.

43www.debem.it

PERISTALTIC PUMPS

MP-3 series

MP-6 series

TYPEFLOW RATE

LITRES/HOUR Kw

R.P.M.VOLTAGE

Ø Inside dia./ wall PIPE/MEMBRANE

PIPE/MEMBRANE MATERIAL

WEIGHT KG

MP-3035.6 16 0,09 Kw 35 rpm220 S.ph.380/220

6,4 x 3,2 N/NA/TY 6

MP-3035.9 31 0,09 Kw 35 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 6

MP-3086.6 40 0,09 Kw 86 rpm220 S.ph.380/220

6,4 x 3,2 N/NA/TY 6

MP-3086.9 78 0,09 Kw 86 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 6

MP-3118.6 56 0,09 Kw 118 rpm220 S.ph.380/220

6,4 x 3,2 N/NA/TY 6

MP-3118.9 103 0,09 Kw 118 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 6

TYPEFLOW RATE

LITRES/HOURKw

R.P.M.VOLTAGE



WEIGHT KG

MP-6035.9 40 0,09 Kw 35 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 7

MP-6035.12 70 0,09 Kw 35 rpm220 S.ph.380/220

12,7 x 3,2 N/NA/TY 7

MP-6086.9 108 0,09 Kw 86 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 7

MP-6086.12 177 0,09 Kw 86 rpm220 S.ph.380/220

12,7 x 3,2 N/NA/TY 7

MP-6118.9 134 0,09 Kw 118 rpm220 S.ph.380/220

9,5 x 3,2 N/NA/TY/Ph 7

MP-6118.12 226 0,09 Kw 118 rpm220 S.ph.380/220

12,7 x 3,2 N/NA/TY 7

*Available with pipes made of [N=NORPRENE] [NA=NORPRENE SUITABLE FOR FOOD] [TY=TYGON] [Ph=PHARMED] produced by NORTON®

MP-8 series

TYPEFLOW RATE

LITRES/HOURKw

R.P.M.VOLTAGE



WEIGHT KG

MP-8035.12 101 0,09 Kw 35 rpm230 Monof.230/400

12,7 x 3,2 N/NA/TY 8

MP-8035.16 140 0,09 Kw 35 rpm230 Monof.230/400

15,9 x 3,2 N/NA 8

MP-8086.12 245 0,09 Kw 86 rpm230 Monof.230/400

12,7 x 3,2 N/NA/TY 8

MP-8086.16 364 0,09 Kw 86 rpm230 Monof.230/400

15,9 x 3,2 N/NA 8

MP-8118.12 352 0,09 Kw 118 rpm230 Monof.230/400

12,7 x 3,2 N/NA/TY 8

MP-8118.16 462 0,09 Kw 118 rpm230 Monof.230/400

15,9 x 3,2 N/NA 8

DEBEM s.r.l. via Del Bosco 4121052 Busto Arsizio (Va) - Italytel. +39 0331 074034 fax +39 0331 074036www.debem.it - [email protected]

R

All the values shown are approximate and not binding. Debem reserves the right to implement changes without prior notice.

petrochemical, food, mechanical, environmental, printing, chemical, painting, galvanic, textile and ceramic industry

NORTH AMERICACANADAUSA

CENTRAL AMERICAMEXICOPANAMA

SOUTH AMERICABRASILCHILECOLOMBIAECUADORVENEZUELA

EUROPEAUSTRIABELGIUMBULGARIACIPRODENMARKFRANCEHUNGARYGEORGIAGERMANYGREECEGREAT BRITAINITALYISRAEL

LITUANIANORWAYNETHERLANDSPOLANDPORTUGALCZECH REPUBLICROMANIARUSSIASPAINSWEDENSWIZERLANDTURKEYUKRAINE

NORTH AFRICAALGERIAEGYPTTUNISIA

SOUTHERN AFRICASOUTH AFRICAMADAGASCAR

MIDDLE EASTBAHRAINIRANIRAQQATARSIRIAUNITED ARAB EMI-

RATES

ASIAKOREACHINAJAPANINDIAINDONESIAMALAYSIAMAURITIUSPAKISTANSINGAPORETAIWANTHAILANDVIETNAM

OCEANIAAUSTRALIANEW ZEALAND

INDUSTRIAL PUMPS

BR

44

- 0

4/

11

EN

imag

inar

ia -

ww

w.im

agin

aria

web

.com

- te

l. +

39

03

31

36

13

97

39

03

31

36

13

97

FDAcompliant


ISO 9001

Made in Italy

Documents

PRODUCTION PROGRAM€¦ · DEBEM represents a point of both arrival and departure: ARRIVAL: because the corporate quality system is an organisational and management tool developed