Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
ETUROPA
OOL
PRODUCT GUIDE 2017
• MILLING• THREADING• HOLEMAKING• INDEXABLE• TOOLHOLDING
SOLID CARBIDE DRILLING TOOLS
PULSARCARBIDE DRILL
ø3mm - 12mm, STUB Solid CarbideTiAlN Coated
High Hardened Steels HRC 50 to HRC 70
• Powerful drilling special geometry reduces cutting load.• Excellent chip evacuation and surface finish of work materials.• Extremely shortened working time & cost saving than EDM machining.
GOLDCARBIDE DRILLS
ø3mm - 20mm, STUB ø3mm - 20mm, 3xDø1mm - 20mm, 5xD
Solid CarbideTiAlN Coated
General PurposeHRC 30 to HRC 50
• Self centering drill point for precise drilling.• Excellent chip removal, high rigidity and excellent performance under
high speed and feed.• High accuracy drill diameter reaming not required.
GOLDCARBIDE DRILLS
ø3mm - 20mm, 3xD ø1mm - 20mm, 5xDø3mm - 12mm, 8xD
Solid Carbidewith Through Coolant
TiAlN Coated
General PurposeHRC 30 to HRC 50
• Self centering drill point for precise drilling.• Excellent chip removal, high rigidity and excellent performance under
high speed and feed.• High accuracy drill diameter reaming not required.
INOXCARBIDE DRILLS
ø3mm - 20mm, 3xD ø1mm - 20mm, 5xDø3mm - 14mm, 8xD
Solid Carbidewith Through Coolant
TiAlN Coated
Stainless Steels, Nickel Alloys and
Titanium Alloys up to HRC 35
• Special flute geometry suitable for stainless steels.• Coating gives excellent chip evacuation, good work piece surface
finish and longer tool life.• Good self centering point and makes good chip curling.
ALU-XPCARBIDE DRILLS
ø3mm - 20mm, 3xD ø3mm - 20mm, 5xDø3mm - 14mm, 8xD
Solid Carbidewith Through Coolant
Aluminium &Aluminium Alloys
• Bright polished flutes prevents built-up edge and gives good chip evacuation.
CFRPCARBIDE DRILL
ø2.5mm - 12mm Solid CarbideDiamond Coated
CFRPCarbon Fibre
Reinforced Plastic
• Special drill point enhances quality of holes and minimises burrs and delamination.
GOLDCARBIDE DRILLS
MQL TYPE
ø3mm - 14mm, 10xD ø3mm - 12mm, 15xDø3mm - 12mm, 20xDø3mm - 10mm, 25xDø3mm - 8mm, 30xD
Solid Carbidewith Through Coolant
TiAlN Coated
Carbon SteelsAlloy Steels
• For deep hole drilling.• Special flute design and surface treatment for excellent chip
evacuation.
GENERALCARBIDE DRILLS
ø2mm - 13mm, STUB ø2mm - 12mm, JOBBER Solid Carbide General Purpose • Long tool life, suitable for drilling soft, thin and general work materials.
NC-SPOTTINGCARBIDE DRILLS
ø6mm - 20mm x 90ºø6mm - 20mm x 120º Solid Carbide General Purpose • For centering and chamfering work materials.
CARBIDECENTRE DRILLS
ø0.5mm - 10mm Solid Carbide General Purpose • For making internal centres on work materials.• Excellent performance under general work conditions.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
DRILLING TOOLS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
DRILLING TOOLS
HSS DRILLING TOOLS
SABRE DRILLS ø3mm - 13mm, STUB HSS-PM TiAlN Coated Multi Purpose
• Special point geometry for high performance.• Using HSS-PM prolongs tool life and improves performance compared
to HSS tools.
HPD-SUS DRILLS ø2mm - 13mm, STUB ø2mm - 20mm, JOBBER
HSS-EX Superior
TiN Coated
Stainless Steel Mild Steels, Copper & Aluminium Alloys
• High helix and sharp cutting edge avoid built-up edge gives high performance drilling.
• HSS-EX material and coating give higher speed and feed with longer tool life.
• Also gives high quality work piece surface finish.
HPD DRILLS ø2mm - 32mm, JOBBERHSSCo
SuperiorTiN Coated
General Steels
• Geometry gives good chip removal,self centering point and reducing thrust for improved accuracy.
• Premium cobalt with superior tin coating for higher speed & feed, increased tool life.
• Also gives high quality work piece surface finish.
GOLDEX DRILLS ø2mm - 32mm, JOBBER DIN338HSS & HSS-E HSS-E DH100 Worm Pattern
Steels, Cast Steels Alloyed and
Non-Alloyed Steels Grey Cast Iron etc
• Competive price but high performance general purpose drills.• Good quality base material and tin coated for excellent tool life to drill
cost ratio.
WORM PATTERNDRILLS
(Parabolic Flute)
ø2mm x 10.5mm DIN1869/1ø3mm x 10.2mm DIN1869/2 ø4mm x 10mm DIN1869/3
HSS-ETiAlN Coated
Carbon Steels, Alloy Steels, Tool Steels,
Hardened Steels, & Cast Iron
• Designed for drilling of deep holes and particular suitable to drill deep holes without pecking cycle.
STRAIGHT SHANK DRILLS
ø1mm - 31mm, STUB DIN1897 ø1mm - 20mm, JOBBER DIN338
ø2mm - 12mm, LONG DIN340
HSS & HSS-E HSS & HSS-E
HSS-E
General Purpose Soft and Tough
Materials
• All CNC ground drills excellent performance with various working conditions.
• Two-tone drills available above 5.0mm.
TAPER SHANK DRILLS ø13mm - 60mm DIN345 HSS General Purpose• All CNC ground drills excellent performance with various working
conditions.• Mainly for drilling of large diameter holes.
NC-SPOTTING DRILLSø3mm - 20mm x 90º
ø3mm - 20mm x 120º HSSCo General Purpose • For centering and chamfering work materials.
CENTRE DRILLSø0.5mm - 10mm
BS1 TO BS7HSS-EX
HSS General Purpose • For making internal centers on work materials.• Excellent performance under general work conditions.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
SPADE DRILLING TOOLS
4F-POINT SPADE INSERT
ø9.5mm - 47.63mm T15 TiAlNP40 TiAlN General Purpose
• New point geometry gives improve stability hole straightness and self centering point.
• Insert system to give interchangeable insert for drilling body to reduce tooling costs.
SPADE INSERT
ø18mm - 114.30mmø9.5mm - 65.09mm
ø9.5mm - 35mmø9.5mm - 35mmø9.5mm - 35mm
ø9.5mm - 47.63mm
M4 TiN / TiAlN T15 TiN / TiAlN M48 TiN / TiAlN K10 TiN / TiAlN K20 TiN / TiAlN P40 TiN / TiAlN
General Purpose • Insert system to give interchangeable insert for drilling body to reduce tooling costs.
FLAT BOTTOM SPADE INSERT
ø9.5mm - 35mm T15 TiAlN General Purpose• Insert system to give interchangeable insert for drilling body to reduce
tooling cost.• With flat bottom geometry for blind hole.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
THREADING TOOLS
CARBIDE TAPSM2 - M20 Carbide
Cast Iron andHigh Silicon Aluminum
• For tapping of through or blind holes, longer tool life and higher precision than HSS taps.
CARBIDE THREAD MILLS
M1.6 - M20No.1 - 1.1/8” UNC 1/4 - 1.1/2” UNF1/8 - 1.1/2” NPT1/16 - 1” BSP
CarbideTiAlN Coated
with and without through Coolant
Hole
Various Materials • For blind holes and through holes with one single tool.• Higher cutting speed and feed than taps.
UNIMASTER UNIVERSAL TAPS
M3-M20 Metric Coarse & Fine No.4 - 1” UNC & UNF
HSS-EBright, Blue, TiN
(Black Ring)HSS-PM Blue(Green Ring)
Multi Purpose• Specially designed and patent geometry to prevent oversize threads
and reducing gauging problems and effective on a very wide range of work materials.
APPLICATION TAPS SPIRAL POINT (DIN)
M2- M30 Metric Coarse & Fine No.4 - 1” UNC & UNF
1/8” - 1” BSP
HSS-EBright
(Colour Ring)All Materials
• Suitable for tapping of through holes in various materials.• Taps are identified with a colour ring to signify suitable tapping material
and easy quick identification.• Made from HSSE material and with treated surface to suit the required
tapping material to give long tool life and good work piece surface finish.
APPLICATION TAPS SPIRAL FLUTE (DIN)
M2- M30 Metric Coarse & Fine No.4 - 1” UNC & UNF
1/8” - 1” BSP
HSS-EBright
(Colour Ring)All Materials
• Suitable for tapping of blind holes in various materials.• Taps are identified with a colour ring to signify suitable tapping material
and easy quick identification.• Made from HSSE material and with treated surface to suit the required
tapping material to give long tool life and good work piece surface finish.
COLD FORMING TAPS (FLUTELESS
OR ROLL TAPS)
M2 - M20 Metric Coarse
HSS-ETiN Coated
HSS-ETiAlN Coated
Cast Aluminum, Brass, Copper,
Aluminum &Steels < 700N/mm2
• Suitable for threading ductile materials.
NUT TAPSM4-M30 Metric Coarse HSSE-Bright
(Yellow Ring) General Purpose • Taps for the high production of nuts.
HAND TAPS (ISO)M1- M30 Metric Coarse & Fine
No.1 - 1” UNC & UNF1/8” - 1” BSPF / BSPT
HSS General Purpose• Designed for hand and machine tapping a variety of materials and
applications.• All taps bright finish ground precision threads.
SPIRAL POINT SPIRAL FLUTE (ISO)
M1.6- M30 Metric Coarse & Fine No.1 - 1” UNC & UNF1/8” - 1” BSPF / BSPT
HSS General Purpose
• Designed for machining tapping a variety of materials and applications.• All taps are blue finish (steam tempered).• Blue wizard - spiral point.• Blue merlin - spiral flute.
CIRCULAR DIES HEXAGON DIENUTS
M3- M30 Metric Coarse & Fine No.10 - 1” UNC & UNF /8” - 1” BSPF / BSPT
HSS General Purpose
• Designed for producing threads on external diameters by hand driven stock or by machine.
• Dienuts for reclaiming damaged external threads.• Diestocks also supplied to suit all sizes.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
MILLING TOOLS
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
SOLID CARBIDE MILLING TOOLS
MASTERMILL VXEND MILLS
ø3mm - 25mmMicro Grain
Solid CarbideVX Coated
Steel <HRc 40, Stainless, Titanium,
Nickel alloys
• Excellent performance in aerospace materials.• Multi flute tools for trochoidal milling.• Variable helix tools for vibration reasistance and long tool life.• Highly suitable for High speed cutting (HSC)
PULSAR BLUEEND MILLS
ø0.1mm - 25mmNano Grain
Solid Carbide Blue Coated
High Hardened Steels HRc 45 - HRc 70
• High speed cutting and dry cutting conditions.• High precision milling, long tool life and excellent workpiece finish.
PULSAREND MILLS
ø0.4mm - 25mmNano Grain
Solid CarbideTiAlN Coated
High Hardened Steels HRC 45 - HRC 65
Cast Iron
• High speed cutting and dry cutting conditions.• High performance to tool cost ratio very high.
PULSAR DMXEND MILLS
ø0.1mm - 25mmMicro Grain
Solid CarbideDMX Coated
Pre-Hardened Steels, General Steels
<HRC55Cast Iron
• Suitable for a large range of materials, specifically for increasing tool life when machining pre-hardened materials, low hardness materials and cast iron.
• High speed cutting (HSC), dry and wet both recommended.
HX2 & ET1END MILLS
ø3mm - 25mmMicro Grain
Solid CarbideTiAlN Coated
Stainless Steels, Titanium &
Low Hardness Materials
• Special patent geometry to reduce cutting vibration and noise. • Excellent workpiece finish under high speed and deep cut.• High performance for difficult-to-cut materials, and good workpiece
surface finish.
HX2S ROUGHINGEND MILLS ø6mm - 25mm
Micro GrainSolid CarbideHX Coated
Cast Iron, Carbon Steels, Alloy Steels,
Tool Steels,Pre-Hardened Steels
• Unique flute design gives excellent chip evacuation and reduction to vibration.
• Optimal roughing tooth profile to reduce cutting forces.• Special tool geometry for high feed rate and heavy cutting.• Strong end tooth design for plunge and pocket milling.• Custom engineered coating to allow long tool life.
ALU-XPEND MILLS
ø2mm - 20mmMicro Grain
Solid CarbidePolished Flutes
Aluminum and Non-Ferrous Materials
• Specialy designed geometry with polished flutes to give superior chip removal and workpiece surface finish.
CFRP & GRAPHITEEND MILLS
ø2mm - 12mm Micro Grain
Solid CarbideDiamond Coated
Carbon Fibre, Graphite &
Non-Ferrous Materials
• Maximum tool life with tool high hardeness and superior finish.• Produced from new ultra fine carbide with diamond coating to give
excellent resistance to abrasion of composite materials - CFRP, GFRP• Geometry designed to reduce delamination and burrs.
CFRP ROUTERS
ø6mm - 12mmMicro Grain
Solid CarbideDiamond Coated
Carbon Fibre, GFRP &
Non-Ferrous Materials
• Produced from new ultra fine carbide with diamond coating to give excellent resistance to abrasion of composite materials - CFRP, GFRP
• Geometry designed to reduce delamination and burrs.
K30 CARBIDEEND MILLS
ø1mm - 25mm
Micro GrainSolid Carbide
Unoated & TiAlN Coated
General Purpose up to HRC 55
• All applications most materials.• High quality carbide and tool performance in ration to tool cost.• Good regrindability.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
MILLING TOOLS
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
INDEXABLE INSERT MILLING TOOLS
MASTERMILL IDXCOPY MILLING
ø8mm - 32mm
Carbide Insert Coated
HSS & Carbide Holders
Hardened Steels & General Purpose
Materials
• Two types of inserts available - TiAlN coated for general materials up to HRC 50.
• Special coating for hardened steels up to HRC 65 specialized geome-try and coating for excellent performance.
MASTERMILL IDXGENERAL MILLING
ø16mm - 32mmEnd Mills
ø40mm - 80mmFace Mills
Carbide Insert Coated
HSS Holders
Alloy Steels, Stainless Steel,
Cast Iron
• Nano technology and multilayer PVD coating achieves the optimal performance.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
HSS MILLING TOOLS
SABRE ROUGHING(FINE PITCH)
ø6mm - 25mm HSS-PM Sabre Coated
Stainless Steels Nickel Alloys Alloy Steels
• Using HSS PM sabre coated roughers gives prolonged tool life and improves performanc due to increase tool toughness and red hardness compared to hss tools.
PM3THROWAWAY
ø1mm - 12mm HSS-PMVX coated
SteelsStainless Steel
TitaniumCast Iron
• Unique HSS-PM high performance substrate.• Utilizing new VX technology coating for long tool life.• DIN standard shank
HSSCoGENERAL MILLING
ø1mm - 50mm(depending on type) HSS - Cobalt General Purpose
• Various types and forms available 2 & 3 flute multi flute finishing and roughing types to suit various milling applications.
• Flatted shank to DIN1835B.
HSS(SCREWED SHANK)
ø1.5mm - 50mm(depending on type) HSS General Purpose
• Various types and forms available 2 & 3 flute multi flute finishing and roughing types to suit various milling applications.
• Screwed shank to BS122/4.
HSS & HSSCoFORM TOOLS
ø10mm - 52.5mm(depending on type)
HSSHSS-Cobalt General Purpose
• Various types and forms available: Dovetail, T-Slot, Woodruff & Corner Rounding.
• HSSCo flatted shank & HSS screwed shank.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
OTHER TOOLS
ETUROPA
OOL Tel: +44 (0) 24 7664 1282 Fax: +44 (0) 24 7664 1390 eMail: [email protected] http://www.europatool.co.uk
UNIMASTER IDXTo suit all ISO
toolholdersHigh performance carbide substrate All work materials
• ISO indexable inserts for turning, milling and drilling.• Grade ET801 for general turning, ET1001 for cast iron turning and
ET602 for milling & drilling. Suitable for demanding applications
REAMERSø2mm - 20mm Carbide General purpose
• For reaming holes to higher tolerance and good finish after general drilling.
• Two types; machine reamers straight flute & machine reamers LH spiral - RH cutting, both with unequal flute spacing.
REAMERSø2mm - 50mm x 0.01(depending on type)
HSSHSS-E General purpose
• Designed for precision sizing of parallel holes.• Available in types hand reamers, machine taper shank, straight shank
chucking & taper shank chucking.
COUNTERSINKS ø4.3mm - 50mm HSSHSS-E General purpose • For deburring, chamfering and countersinking holes.
COUNTERBORESM4 - M202BA - 1”
HSSHSS-E General purpose
• Counterbores are fixed pilot.• Designed for machining screw head seats like fillister screw caps,
socket head screw caps and ejector caps in moulds.
ROTARY BURRSø1.5mm - 25mm Carbide General steels
Non-ferrous metals• For removal sharp corners, burrs and fins etc.• Forms A,B,C,D,E,F,G,H,J,K,L,M,N, all give excellent performance.
PRODUCT SIZE RANGE TOOLMATERIAL
WORKMATERIAL CHARACTERISTICS
ETUROPA
OOL
ETUROPA
OOL
ETUROPA
OOL
SSK TOOL CO., LTD High performance spindle tooling, balanced up 25,000 rpm
Europa Tool Co Ltd
Unit 2 Kingfisher CourtHemdale Business ParkNuneatonWarwickshireCV11 6GY
Tel: +44 (0) 24 7664 1282Fax: +44 (0) 24 7664 1390email: [email protected]
www.europatool.co.uk
ETUROPA
OOL
Thanks to our manufacturing companies’ high quality and reliability of constant product development through innovation, Europa has been rapidly expanding its market share with its global partners.
As one of the leading cutting tool manufacturers in the world we are now ever expanding our customers and products in various cutting tool solutions globally. In order to achieve the most efficient logistics, production, and marketing we have now established a global network across 75 countries.
This gives Europa the opportunity to provide our customers with more success in their business and meet our promise to give our customers the best products & service.
“A whole world of performance tooling”