Upload
others
View
78
Download
5
Embed Size (px)
Citation preview
TECHNICAL REVISION September 2013
Process Industry Practices Piping
PIP PNSMV006 Carbon Steel Ball Valve Descriptions
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.
This Practice is subject to revision at any time.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice.
PRINTING HISTORY
October 1995 Issued June 2001 Technical Correction March 2010 Complete Revision February 1999 Complete Revision November 2003 Technical Revision June 2012 Technical Revision May 2000 Revision November 2005 Technical Revision September 2013 Technical Revision
Not printed with State funds
TECHNICAL REVISION September 2013
Process Industry Practices Page 1 of 20
Process Industry Practices Piping
PIP PNSMV006 Carbon Steel Ball Valve Descriptions
Table of Contents
1. Introduction ................................. 2 1.1. Purpose ............................................. 2 1.2 Scope ................................................. 2
2. References .................................. 2 2.1 Process Industry Practices ................ 2 2.2 Industry Codes and Standards .......... 2
3. Valve Designation System ......... 2
4. Notes ........................................... 2
5. Cross Reference ......................... 3
6. Valve Descriptions ..................... 5
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 2 of 20
1. Introduction
1.1. Purpose This Practice provides requirements for suppliers providing carbon steel ball valves included in PIP Piping Line Class Material Specifications.
1.2 Scope This Practice describes the requirements for carbon steel ball valves.
2. References
Applicable parts of the following Practice shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles will be used herein where appropriate.
2.1 Process Industry Practices (PIP) – PIP PNCM0004 - Valve Commodity Codes Designator System
2.2 Industry Codes and Standards • American Petroleum Institute (API)
– API 6FA - Specification for Fire Test for Valves – API 607 - Fire Test for Soft-Seated Quarter Turn Valves
3. Valve Designation System
3.1 For a full explanation of the format used to structure the valve numbers listed within this Practice, refer to PIP PNCM0004.
3.2 This Practice provides descriptions for ball valves. Therefore, the first two characters in the valve numbers are BA.
3.3 The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique valve number designation in ascending alphanumeric sequence (e.g., BA01CA500, BA01CA501, BA01CB500, BA01CB501, BA03CA500).
4. Notes
4.1 Occasionally, valve size ranges listed in this Practice are broader than the size ranges shown for the same valves on a given piping line class specification. While the “most common practice” has been used to specify valve size ranges on line class specifications, a purchaser may need to utilize a valve in a size outside this “common practice” choice. Thus, for reference purposes, the full size range for which a given valve is typically manufactured is shown in this Practice.
4.2 Gear operators are specified in some, but not all, ball valve descriptions. If not specified in the valve description, the purchaser shall specify that gear operators are needed. One
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 3 of 20
method of specifying this need is by using Field 5 of the valve designation system as described in PIP PNCM0004.
4.3 Many ball valve manufacturers offer numerous operator options (e.g., locking/nonlocking, latching/nonlatching, oval, tee). As a default, valve descriptions within this Practice only specify the manufacturer’s standard lever. The purchaser shall specify a different operator if required.
4.4 If fluids can be trapped (e.g., in double-seated valves) and subject to heating and subsequent expansion, means of pressure relief shall be considered to avoid excessive pressure built-up.
5. Cross Reference
Valve Number Applicable Line Classes BA01CA500 1CA1S01 BA01CA501 1CA1S01 BA01CA502 1CA1S01 BA01CA503 1CA1S01 BA01CA504 1CA1S01 BA01CA505 1CA1S01 BA01CA506 1CA1S01 BA01CA507 1CA1S01 BA01CB500 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB501 1CB1S01, 1CS1B02, 1CB2S01, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB502 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB503 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB504 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB505 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01, 1SA0B01 BA01CB506 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01 BA01CB507 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS2S01 BA03CA300 1CA1S01, 3CA1S01 BA03CA500 3CA1S01 BA03CA501 3CA1S01 BA03CA502 3CA1S01 BA03CA503 3CA1S01 BA03CA504 3CA1S01 BA03CA505 3CA1S01 BA03CA506 3CA1S01 BA03CA507 3CA1S01 BA03CB300 1CB1S01, 1CB2S01, 1CS1S01, 1CS2S01, 3CB1S01, 3CB2S01, 3CS1S01,
3CS2S01 BA03CB500 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01 BA03CB501 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01 BA03CB502 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01 BA03CB503 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 4 of 20
BA03CB504 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01 BA03CB505 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01, 3SA0B01 BA03CB506 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01 BA03CB507 3CB1S01, 3CB2S01, 3CS1B01, 3CS1S01, 3CS2B01, 3CS2S01 BA06CA300 6CA1S01 BA06CA500 6CA1S01 BA06CA501 6CA1S01 BA06CA502 6CA1S01 BA06CA503 6CA1S01 BA06CA504 6CA1S01 BA06CA505 6CA1S01 BA06CB300 6CB1S01, 6CB2S01 BA06CB500 6CB1S01, 6CB2S01, 6SA0B01 BA06CB501 6CB1S01, 6CB2S01, 6SA0B01 BA06CB502 6CB1S01, 6CB2S01, 6SA0B01 BA06CB503 6CB1S01, 6CB2S01, 6SA0B01 BA06CB504 6CB1S01, 6CB2S01 BA06CB505 6CB1S01, 6CB2S01
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 5 of 20
6. Valve Descriptions
Description of BALL Valve (BA01CA500):
Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 6
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA01CA501): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 6
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 1/2 -to- NPS 4)
ASME B16.10 - LONG PATTERN (NPS 6)
Description of BALL Valve (BA01CA502): Type:............................. BALL
Valve Size:....................... NPS 8 -to- NPS 10
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 6 of 20
Description of BALL Valve (BA01CA503): Type:............................. BALL
Valve Size:....................... NPS 8 -to- NPS 10
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA01CA504): Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA01CA505):
Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 12 -to- NPS 16)
ASME B16.10 - LONG PATTERN (NPS 18 -to- NPS 24)
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 7 of 20
Description of BALL Valve (BA01CA506): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X-750
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA01CA507):
Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING
TESTING
-
-
API 6D
API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA01CB500): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 6
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 8 of 20
Description of BALL Valve (BA01CB501): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 6
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 1/2 -to- NPS 4)
ASME B16.10 - LONG PATTERN (NPS 6)
Description of BALL Valve (BA01CB502):
Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 12 -to- NPS 16)
ASME B16.10 - LONG PATTERN (NPS 18 -to- NPS 24)
Description of BALL Valve (BA01CB503): Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 9 of 20
Description of BALL Valve (BA01CB504): Type:............................. BALL
Valve Size:....................... NPS 8 -to- NPS 10
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA01CB505): Type:............................. BALL
Valve Size:....................... NPS 8 -to- NPS 10
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA01CB506): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 10 of 20
Description of BALL Valve (BA01CB507): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 150
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36) MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA03CA300): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 2
Class:............................ 300
Ends:............................. SW
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Body Type:........................ 3-PIECE BOLTED
Design:........................... FLOATING BALL, FIRE TESTED
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.11
RATING - ASME B16.34
DIMENSIONAL - MFG STD
Description of BALL Valve (BA03CA500): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 11 of 20
Description of BALL Valve (BA03CA501): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA03CA502): Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 12 -to- NPS 16)
ASME B16.10 - LONG PATTERN (NPS 18 -to- NPS 24)
Description of BALL Valve (BA03CA503): Type:............................. BALL
Valve Size:....................... NPS 10 -to- NPS 24
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 12 of 20
Description of BALL Valve (BA03CA504): Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 8
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 6)
ASME B16.10 - LONG PATTERN (NPS 8)
Description of BALL Valve (BA03CA505):
Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 10
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA03CA506):
Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 13 of 20
Description of BALL Valve (BA03CA507): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA03CB300): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 2
Class:............................ 300
Ends:............................. SW
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Body Type:........................ 3-PIECE BOLTED
Design:........................... FLOATING BALL, FIRE TESTED
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.11
RATING - ASME B16.34
DIMENSIONAL - MFG STD
Description of BALL Valve (BA03CB500):
Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 14 of 20
Description of BALL Valve (BA03CB501):
Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA03CB502): Type:............................. BALL
Valve Size:....................... NPS 12 -to- NPS 24
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 12 -to- NPS 16)
ASME B16.10 - LONG PATTERN (NPS 18 -to- NPS 24)
Description of BALL Valve (BA03CB503): Type:............................. BALL
Valve Size:....................... NPS 10 -to- NPS 24
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 15 of 20
Description of BALL Valve (BA03CB504): Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 8
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN (NPS 6)
ASME B16.10 - LONG PATTERN (NPS 8)
Description of BALL Valve (BA03CB505): Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 10
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - SHORT PATTERN
Description of BALL Valve (BA03CB506): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Body Type:........................ BOLTED or UNIBODY
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 16 of 20
Description of BALL Valve (BA03CB507): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 300
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Body Type:........................ BOLTED or UNIBODY
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA06CA300): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 2
Class:............................ 600
Ends:............................. SW
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Body Type:........................ 3-PIECE BOLTED
Design:........................... FLOATING BALL, FIRE TESTED
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.11
RATING - ASME B16.34
DIMENSIONAL - MFG STD
Description of BALL Valve (BA06CA500): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 17 of 20
Description of BALL Valve (BA06CA501): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 3
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA06CA502): Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 24
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA06CA503):
Type:............................. BALL
Valve Size:....................... NPS 4 -to- NPS 24
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 18 of 20
Description of BALL Valve (BA06CA504): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA06CA505): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. ITCS (ASTM A350 - LF2 CLASS 1 or A352 - LCB or A352 - LCC)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING TESTING
- -
API 6D API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA06CB300): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 2
Class:............................ 600
Ends:............................. SW
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Body Type:........................ 3-PIECE BOLTED
Design:........................... FLOATING BALL, FIRE TESTED
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.11
RATING - ASME B16.34
DIMENSIONAL - MFG STD
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 19 of 20
Description of BALL Valve (BA06CB500): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 4
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA06CB501): Type:............................. BALL
Valve Size:....................... NPS 1/2 -to- NPS 3
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... FLOATING BALL or TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ LEVER
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA06CB502): Type:............................. BALL
Valve Size:....................... NPS 6 -to- NPS 24
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
PIP PNSMV006 TECHNICAL REVISION Carbon Steel Ball Valve Descriptions September 2013
Process Industry Practices Page 20 of 20
Description of BALL Valve (BA06CB503): Type:............................. BALL
Valve Size:....................... NPS 4 -to- NPS 24
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Ball:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 316 SS
Design:........................... TRUNNION BALL, FIRE SAFE API 607
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING TESTING
- -
ASME B16.34 API 598
DIMENSIONAL - ASME B16.10 - LONG PATTERN
Description of BALL Valve (BA06CB504): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ SINGLE REDUCED
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING - API 6D
TESTING - API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)
Description of BALL Valve (BA06CB505): Type:............................. BALL
Valve Size:....................... NPS 26 -to- NPS 48
Class:............................ 600
Ends:............................. FLANGED RF
Body:............................. CS (ASTM A105 or A216 - WCB)
Trim:............................. 316 SS
Seat:............................. R-PTFE
Stem:............................. 17-4 PH SS
Springs:.......................... INCONEL X
Design:........................... TRUNNION BALL, FIRE SAFE API 6FA
Bore-Port:........................ FULL
Operation:........................ GEAR
Stem Seals:....................... FLEXIBLE GRAPHITE
Stem-Packing:..................... FLEXIBLE GRAPHITE
Body-Bonnet Gaskets:.............. FLEXIBLE GRAPHITE
The standards are:
DESIGN - ASME B16.34 and API 6D
ENDS - ASME B16.47 SERIES B
RATING - API 6D
TESTING - API 6D
DIMENSIONAL - API 6D (NPS 26 -to- NPS 36)
MFG STD (NPS 38 -to- NPS 48)