Upload
nguyenkhuong
View
218
Download
3
Embed Size (px)
Citation preview
Presented by Ángel Lagraña INFODAY CLEANSKY 29TH FEBRUARY 2012
WHO WE ARE
ASCAMM TECHNOLOGY CENTRE IS A LEADING PRIVATELY HELD ORGANISATION IN:
• Industrial Research
• Technical Assistance
• Technology Transfer
Specialised for more than 30 years in INDUSTRY-ORIENTED, advanced
technology applications.
More than 30 years serving the industry
Ascamm a private research organitzation was been founded in 1979 and
employs 165 highly qualified staff in its 11 000 m2 high tech headquarters
in Cerdanyola del Vallès, near Barcelona (Spain) and carries out extensive
international operations (Europe, Latinamerica, Asia).
Manufacturing:
Efficient and Customized Multi-Process Solution
Materials:
Lighweight, Resistant and Recyclable Components
Design and Integral
ICT and Robotic Technologies:
Intelligent Systems for Process Control KBS and CBR Decision Support Software
OUR KNOWLEDGE AREAS
Design and Integral
Development of
Innovative Products and Processes
Development of
Positioning Systems and Autonomus Robotics
Process automation and efficiency increase
ASCAMM OPERATIONAL UNITS
Plastics Materials Unit
Composite Materials Unit
NanomaterialsUnit
Metallic Materials Unit
Product DesignUnit
Attractiveness, Efficiency, Functionality, Standards, FEM Simulation, Functional Simulation, Process-oriented
Thermoplastic matrix, Thermosets. Fibreglass, Carbon, Natural Fibres. Processes: RTM, Pulltrusion, Press,…
High strength steel, Tool steels, Surface Engineering, Smart Materials, Dieless Forming, Rapid Prototyping
Industrial application of Nanoparticles, Nanopolymers, Nanoimprinting to give specific properties & functions
Plastics selection, Compounding, Injection, Extrusion, Blow moulding, Microinjection, Thermoforming
CTAE Centre of Aeronautical and Space Technologies
Light Alloy Materials Unit
Automation Unit
ICT Unit
Unit
Manufacturing Lab Unit
Nanoimprinting to give specific properties & functions
Al, Mg, Zamak Alloy product /process development. Open and Closed Cell Foams, Metal Composites
Special integrations: Deburring, Drilling, Welding, Painting, Artificial Vision for automatic Quality Control
High level Artificial Intelligence, Decision-support tools, Smart Energy Management, Data Mining
Advanced machining for tooling and prototyping.
Major Objective Compounding:
• Additivation with: CNT, fillers,
compatibilizers, nanoclays,
mineral addtives….
• Mechanical properties
improvements, thermal
conductivity, electrical,…
• Thermoplastic blends to specific
application in the transportation
Major Objective Composites:
• Process development,
thermoplastics and thermoset
matrix.
• Design and Manufacturing of
Prototypes, Molds and Tooling.
• Process improvements.
• Biocomposites: Manufacturing of
COMPOSITES UNIT
application in the transportation
sector.
• Biocomposites: Manufacturing of
reinforced components 100%
biodegradables with natural
fabrics.
COMPOLAB: LAB FOR R&D&i in Composites production processes.
COMPOSITES UNIT
Funcionalization of Componentsfor interior:Antistain
Hydrofobic
Anti-odor
Antifunghi.
Fire resistance
Encapsulated aromatics
Conductive polymerwith scrambed
fibres
Polypropilen with con silver nano-fibres de plata : conductivity /
antibacterial
NANOTECNOLOGIES UNIT
Encapsulated aromatics
High resistance
…….
Polypropilen additivatedwith fluorescent nano-
partíclesPolyester Fibres covered with
hydrophobic nano-coating
Movementsensors
Movementsensors
Artificial Visión Artificial Visión
FrequencyFrequency
ActuatorsActuators
Movementsensors
Artificial Visión
Frequency
Actuators
Innovation in manufacturing
Automation and machine controlAutomation and machine controlAutomation and machine control
ROBOTICS, AUTOMATION AND MECHATRONICS UNIT
MechatronicsMechatronics
FrequencyconvertersFrequencyconverters
Bar code and RFID scaningBar code and RFID scaning
Mechatronics
Frequencyconverters
Bar code and RFID scaning
manufacturingprocessesusing robot
PLC and sensoringPLC and sensoringPLC and sensoring
MILLING ROBOTIC CELLS
Design by CAD
Milling Process by
Several projects of milling cells using robots(in cooperation with ABB)
OFFLINE PROGRAMMING
Simulation Software –with virtual robot
Milling Process by CAM
CALIBRATION SYSTEMS
KINEMATICS CALIBRATION OF ROBOTS using laser interferometry
Quality Control
Quality control by artificial vision of parts in metal&plasticsector, detecting contour, pigmentation, geometry andcontrol screening.Perfect tool to verify, validate and ensure the product specifications.
Prototyping Milling process of blades
Milling Software CAD-CAM-ROB (RobotAscamm)
METALS UNIT
DIELESS RAPID MANUFACTURING TECHNOLOGIE
INCREMENTAL SHEET FORMING (ISF)Target: Development of new generation of ISF based on industrial
robotics, hot forming and neuronal networks as DSS
pre-form
final form
METALS UNIT
DESIGN
Análisis de mecanismosAnálisis de mecanismos
FluidodynamicFluidodynamic
Impact analysisImpact analysis
Linear and non linearAnálisisLinear and non linearAnálisis
Análisis de mecanismos
Fluidodynamic
Impact analysis
Linear and non linearAnálisis
SIMULATION
INNOVATION IN DESIGN AND SIMULATIONS
Creativity
Efficiency
Flow of ideas
Atractivness
Innovation
Advanced Design and Simulation = >> Efficiency, >> Innovation, << Time-to-market
Análisis multiphysicsAnálisis multiphysics
Heat TransferHeat Transfer
Caract. and modellingCaract. and modelling
Process simulationProcess simulation
Análisis multiphysics
Heat Transfer
Caract. and modelling
Process simulation
Biodegradability
Flow of ideas
Oriented to industrialize
Oriented to standards
Functionality
� Positioning and Navigation
- Outdoor: GPS, Galileo,
EGNOS.
- Indoor: LBS for mobiles.
MAIN COMPETENCES
CTAE main competences are:
16
� Autonomous Robots:
- Aereal (UAV) and Ground.
- Individuals / Collective.
� Comunication and Software:
HMI, vehicle –infraestructure and
vehicle-vehicle)
1015
Human Resources 2011Staff
Regular technical collaborators
University student trainees
74.44 %
12.79 %
7.93 % 4.84 %
Revenues 2011 15 M€
CORPORATE FACTS & FIGURES
Technological leadership Technological leadership and personnel talent personnel talent are the pillars of Ascamm’s growth
130R&D Testing Training Other
Cumulative capital investment 23.75 M€
R+D+I Projects in 2009:
Catalonia: 10 (2 led by ASCAMM)
Spain: 46 (29 led by ASCAMM)
Europe: 16 (4 led by ASCAMM)
210 companies involved in RDI projects
R+D+I Projects in 2009:
Catalonia: 10 (2 led by ASCAMM)
Spain: 46 (29 led by ASCAMM)
Europe: 16 (4 led by ASCAMM)
210 companies involved in RDI projects
R+D+I FACTS & FIGURES
One of the leading Spanish private centers in EU-funded R&D projects (FP6/FP7, etc)
8 Patents
12 High-tech products
6 Spin-off companies
ASCAMM IN AERONAUTICS OUR CLEANSKY EXPERIENCE
Call for proposal in consortia:
Presented: 12 (9 led by ASCAMM)
Approved: 8 (7 led by ASCAMM)
Top ranked: 6 (4 led by ASCAMM)
Call for proposal in consortia:
Presented: 12 (9 led by ASCAMM)
Approved: 8 (7 led by ASCAMM)
Top ranked: 6 (4 led by ASCAMM)
SUPERBLEND INARAS GREENBARRELS
JIF4FLIGHTLIGHT-TANK
HAGTIS
WHAT CAN CLEANSKY BRING TO A NEW PARTNER
•Projects with high TRL and market oriented (TRL6).
•Direct entry to contact the main european aeronautical stakeholder.
•Opportunity to show the “savoir faire” and develope new capacities.
•Join forces with national or european partners to complement capacity and thuscreate a suppy chain value.
•A real chance to be present in future aircraft programs due to early knowledge of •A real chance to be present in future aircraft programs due to early knowledge of coming technologies.
•Among others
WHAT CAN NEW PARTNERS BRING TO CLEANSKY
•Experience from other productive sector, in example automotive: LCA, reciclability, process automation,new materials.
•The chance to propose new and innovative solutions when answering to Call forproosal.
•The thinking of more competitive markets.
•The introduction of partnership among the huge SME european basis of companies to create new possible suppliers in future programs.companies to create new possible suppliers in future programs.
•Among others
Fundación Privada AscammParc Tecnològic del Vallès Av. Universitat Autònoma 2308290 Cerdanyola del Vallès (Barcelona)
Angel Lagraña
Business Development and Project Manager AeronauticsBusiness Development and Project Manager Aeronautics
www.ascamm.com I [email protected]
M +34 648 725 077T +34 935 944 700 | F +34 935 801 102
GPS: +41° 29' 20", +2° 7' 33”